CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation...
Transcript of CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation...
![Page 1: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/1.jpg)
CITY PLAN REVIEW AND INSPECTION
Lisa Fleming Brown, CPM
![Page 2: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/2.jpg)
Houston Commercial Energy Conservation Code (2011)
A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments.
Effective September 2, 2011. Complete plans submitted prior to this date may use the code in existence.
![Page 3: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/3.jpg)
Applies to commercial of any height
Multi-family residential more than 3 stories
Does not apply to: Single family, low energy buildings, buildings that do not use fossil fuel or electricity.
![Page 4: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/4.jpg)
Specific exemptions in building systems or building elements throughout the code
Equipment and portions of buildings that use energy primarily to provide for industrial, manufacturing, or commercial processes.
Life Safety – Prevails.
![Page 5: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/5.jpg)
Plans – New items required to be noted on the plans.
ComCheck or Other Approved Software
New City Energy Code Forms for MEP portions …coming soon
Commissioning Statements
Inspections – No new inspections, but some new compliance data.
![Page 6: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/6.jpg)
Comply based on the applicable provisions (2006 IECC with Houston Amendments for Apartment) (Commercial Provisions for Restaurant)
![Page 7: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/7.jpg)
4.1.1.5 Changes in Space Conditioning. Whenever unconditioned or semiheated spaces in a building are converted to conditioned spaces, such conditioned spaces shall be brought into compliance with all the applicable requirements of this code that would apply to the building envelope, heating, ventilating, air-conditioning, service water heating, power, lighting, and other systems and equipment of the space as if the building were new.
Roofs/Ceilings that are part of the building envelope will be
required to come in to compliance!
![Page 8: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/8.jpg)
4.2.1.1 New Buildings: New Buildings shall comply with either the provisions of
Sections 5, 6, 7, 8, 9, and 10 or Section 11.
4.2.1.2 Additions to Existing Buildings: Additions to existing buildings shall
comply with either the provisions of Sections 5, 6, 7, 8, 9, and 10 or Section 11.
Exception to 4.2.1.2: When an addition to an existing building cannot comply by
itself, trade-offs will be allowed by modification to one or more of the existing
components of the existing building. Modeling of the modified components of the
existing building and addition shall employ the procedures of Section 11; and the
addition shall not increase the energy consumption of the existing building plus the
addition beyond the energy that would be consumed by the existing building plus the
addition if the addition alone did comply.
Option 1 – Comply with the prescriptive provisions as if the addition were a
separate building.
Option 2 - Make trade-offs between the addition and the improvements to the
existing so that the annual energy use meets the same as the prescriptive.
![Page 9: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/9.jpg)
4.2.1.3 Alterations of Existing Buildings: Alterations of existing buildings shall comply with the provisions of Sections 5, 6, 7, 8, 9, and 10, provided, however that nothing in this code shall require compliance with any provision of this code if such compliance will result in the increase of energy consumption of the building.
Exceptions to 4.2.1.3:
(a) A historic building need not comply with a provision or provisions that would invalidate or jeopardize the historical designation or listing.
(b) Where one or more components of an existing building or portions thereof are being replaced, the annual energy consumption of the comprehensive design shall not be greater than the annual energy consumption of a substantially identical design, using the same energy types, in which the applicable requirements of Sections 5, 6, 7, 8, 9, and 10, as provided in 4.2.1.3, and such compliance is verified by a design professional, by the use of any calculation methods acceptable to the authority having jurisdiction.
![Page 10: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/10.jpg)
Storm windows over existing glazing
Replacing broken or damage glazing in existing sash/frame
Altering roofs, ceilings, walls, with cavities if the cavity has at least R3.0/in
Altering walls and floors with no framing cavities
Replacing a roof membrane as long as neither the roof sheathing nor the existing insulation is exposed
Replacing doors doesn’t trigger the vestibule requirement
Replacing up to 25% of glazing if U and SHGC of replacement= original or better
The following alterations are exempt from compliance unless
they increase energy use:
![Page 11: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/11.jpg)
Type of Work Comply with New Code?
Coating No
Second Roof Covering No
Top Membrane Replacement No
Covering Exposing Insulation Yes, if cavity is less than R3
Full Depth Patch No
Full Depth-Edge to Edge Yes
NEW APPENDIX ADDED FOR EXPLANATION!
![Page 12: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/12.jpg)
- Envelope component types: Exterior or Semi-Exterior.
- Exterior – Separate conditioned space from outdoor.
- Semi Exterior – Separate conditioned from non-conditioned space.
- Shell spaces are assumed to be conditioned unless noted!
![Page 13: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/13.jpg)
Regardless of compliance method these items have to be met.
Insulation
Proper installation to achieve rating
(no compression, except in metal bldg
purlins at supports)
Loose-fill or blown in only in roofs with
a slope of less than 3:12
Baffles in ventilated attics
Substantial Contact
Recessed Equipment Section 5.8.1.6
No insulation directly over suspended
ceilings
Fenestration & Doors
Check label or get installer
certification
Air leakage rates
SHGC and U
![Page 14: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/14.jpg)
Joints, cracks and holes Caulked, gasketed, weather stripped or sealed Plans require a note with .3 cfm for fenestration
Air leakage – Controlling the air infiltration
through the building envelope
![Page 15: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/15.jpg)
• Required at doors.
• Must have closing devices.
• Designed to not allow both doors open at the same time and at least 7 ft apart.
• NOTE – IBC limits amount of vestibules to 50% of egress.
EXCEPTIONS
• Differ in IECC and ASHRAE
![Page 16: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/16.jpg)
Opaque Elements Nonresidential Residential Semiheated
Assembly
Maximum
Insulation Min.
R-Value
Assembly
Maximum
Insulation Min.
R-Value
Assembly
Maximum
Insulation Min.
R-Value
Roofs
Insulation Entirely above Deck
Metal Building
Attic and Other
U-0.063
U-0.065
U-0.034
R-15.0 ci
R-19.0
R-30.0
U-0.063
U-0.065
U-0.027
R-15.0 ci
R-38.0
R-19.0
U-0.218
U-0.167
U-0.081
R-3.8 ci
R-13.0
R-6.0
Walls, Above-Grade
Mass
Metal Building
Steel-Framed
Wood-Framed and Other
U-0.580
U-0.113
U-0.089
U-0.124
NR
R-13.0
R-13.0
R-13.0
U-0.089
U-0.113
U-0.124
U-0.151a
R-5.7 ci
R-13.0
R-13.0
R-13.0
U-0.580
U-0.184
U-0.292
U-0.352
NR
NR
NR
R-6.0
Wall, Below-Grade
Below-Grade Wall
C-1.140
NR
C-1.140
NR
C-1.140
NR
Floors
Mass
Steel-Joist
Wood-Framed and Other
U-0.137
U-0.107
U-0.051
R-4.2 ci
R-19.0
R-19.0
U-0.107
U-0.051
U-0.052
R-6.3 ci
R-19.0
R-19.0
U-0.282
U-0.350
U-0.322
NR
NR
NR
Slab-On-Grade Floors
Unheated
Heated
F-1.020
F-0.730
NR
R-7.5 for 12 in.
F-0.730
F-1.020
NR
R-7.5 for 12 in.
F-1.020
F-0.730
R-7.5 for 12 in.
NR
Opaque Doors
Swinging
Non-Swinging
U-0.700
U-1.450
U-0.700
U-1.450
U-0.700
U-1.450
![Page 17: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/17.jpg)
Roof Insulation (5.5.3.1)
Insulation above deck – installed in a continuous manner. Interruptions limited to 1% of the roof area.
Metal Buildings – Must install the thermal block of at least 1 in.
![Page 18: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/18.jpg)
5.5.3.1.1Cool roofs. Low slope roofs up to 2:12 shall be provided with a roof covering where the exterior surface has:
(a) solar reflectance of 0.70 or higher
(b) thermal emittance of 0.75 or higher
Concrete SR = .35
New asphalt SR = .05
Installer letter accepted for inspections
![Page 19: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/19.jpg)
Cool roofing exceptions –
1/3 roof or less is covered by a deck.
The area of the roof that is covered with by a garden/green roof.
Photovoltaic and solar thermal equipment (area of PV x 3)
![Page 20: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/20.jpg)
Fenestration
Meet U-factor and SHGC
50% limit of window to wall area for prescriptive approach
LEAVE LABELS FOR INSPECTION
![Page 21: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/21.jpg)
Skylights limited to 5% gross roof area
SHGC North Oriented Glazing
SHGC Projection Factor
Factor
Projection
SHGC Multiplier
(All Other
Orientations)
SHGC
Multiplier
(North-
Oriented)
0-0.10 1.00 1.00
>0.10-0.20 0.91 0.95
>0.20-0.30 0.82 0.91
>0.30-0.40 0.74 0.87
>0.40-0.50 0.67 0.84
>0.50-0.60 0.61 0.81
>0.60-0.70 0.56 0.78
>0.70-0.80 0.51 0.76
>0.80-0.90 0.47 0.75
>0.90-1.00 0.44 0.73
![Page 22: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/22.jpg)
Building Envelope AND HVAC Commissioning
Required in projects larger than 50K sq ft
of conditioned area.
Require a commissioning statement
signed & sealed by the architect
![Page 23: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/23.jpg)
HVAC – When and what type of dampers are required
HVAC – Sealing return air
Lighting – Occupancy sensors
Lighting – Space by Space method vs. Building Method
Lighting – Time clock requirement
Envelope - Insulation attachment
Envelope – Cool roof statement from installer
![Page 24: CITY PLAN REVIEW AND INSPECTION Lisa Fleming Brown, CPM · Houston Commercial Energy Conservation Code (2011) A choice of 2009 IECC or ASHRAE 90.1-2007 with amendments. Effective](https://reader035.fdocuments.in/reader035/viewer/2022070822/5f24ce49cdca3d07ce5ecd92/html5/thumbnails/24.jpg)
City of Houston Code Enforcement www.houstonpermits.org / 832-394-9039