Table 3: mounting Accessories

Part Number Product Description

CIVS-IPCA-1006 Conduit Base Spare with Extra Gaskets for 26xxV Series IP Dome Cameras

IP66-rated conduit base for 26xxV Series IP Dome Cameras

CIVS-IPCA-1007 Ceiling Tile Mount Support for 26xxV Series IP Dome Cameras

Bracket for mounting the 26xxV Series IP Dome Cameras from a drop ceiling

CIVS-IPCA-1008 Ceiling Tile Mount Support for 2611 Flush Mount IP Dome Cameras

Bracket for mounting the 2611 Series IP Dome Cameras from a drop ceiling

CIVS-IPCA-1010 Pendant Cap Pendant cap for installations requiring a down rod or similar extension

CIVS-IPCA-1011 Wall mount for Use with Pendant Cap

Wall mount bracket for wall installation of pendant cap (CIVS-IPCA-1010)

Cisco Dome Camera Model ComparisonAt-A-Glance

Part Number Product Description

CIVS-IPCA-1012 Ceiling mount for Use with Pendant Cap

Bracket for ceiling mount installation of pendant cap ((CIVS-IPCA-1010)) with down rod

CIVS-IPCA-1013 Pendant Cap Adapter (3/4 inch to 1.5 inch male NPT thread)

For connecting pendant cap (CIVS-IPCA-1010) to 1.5 inch mounting options

CIVS-IPCA-1014 Round Pole Mount Adapter for Use with Wall Mount

Use with wall mount acces-sory (CIVS-IPCA-1011) when mounting on a pole

CIVS-IPCA-1017 Cisco IP Video Surveillance Camera AV Cable

Audio / video cable accessory for connecting line in and speaker out

CIVS-IPCA-1018 Cisco IP Video Surveillance Camera Sun Shield

Sun shield accessory for 26xxV Series domes

Copyright © 2011 Cisco Systems, inc. All rights reserved. Cisco, Cisco ioS, Cisco Systems, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, inc. and/or its affiliates in the united States and certain other countries. C45-647424-00 02/11

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 25

Cisco IP Camera Third-Party Accessories

This document is a reference guide for accessories that can be used with Cisco Video Surveillance box and dome cameras. It contains information about wall mounts, rooftop mounts, pole mounts, and different enclosures from Pelco, Videoalarm, and PoE Technologies. Prices are estimated; actual pricing might be different.

Pelco accessories can be ordered from Pelco Electronics, Clovis CA, or Certified Pelco distributors.

Outdoor Dome Housing for Cisco Video Surveillance 5000 Series High-Definition IP Dome Camera

ID-P (Pendant Mount Adapter)

Product Features ● Construction aluminum

● Finish polyester powder coat

● Unit weight 1.69 lb (0.77 kg)

The ID-P pendant mount adapter is specifically designed for ID and IDE Series network dome cameras. The pendant adapter modifies the network dome camera for pendant installations using a 1.5-in. (3.81-cm) NPT mount, such as the SWM-WT mount.

Mounting Method Attach the ID-P to a mount with 1.5-in. (3.81-cm) NPT pipe (such as the SWM-GY or IWM-GY mount).

Approximate Price: $33–$45

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 25

DF5-PG-E1 (Outdoor) (For Cisco 5000 and Cisco 2900 PTZ Camera )

Product Features ● 5.9-in. acrylic bubble with plenum-rated back box and 24 VAC input

● Hard ceiling and suspended ceiling applications

● Versatile and adjustable fixed camera mount bracket

● Environmentally sealed and weatherized pendant for use in temperatures as low as –60°F (–51°C)

● Pendant models meet NEMA Type 4X, IP66 standards

● Heavy-duty models:

◦ Tough, reinforced construction

◦ 0.090-in. injection-molded polycarbonate bubble

Mounting Method The DF5 Series pendant models mount directly to any recommended mount flush to a ceiling, or to a 1.5-in. NPT female threaded pipe, and are available for indoor and environmental applications. All environmental versions include a sun shield and heater kit and are suitable for use in temperatures as low as –60°F (–51°C).

A variety of lower domes are available for this series. Standard and shortened back box models are equipped with an acrylic bubble; available colors for standard models include smoked, clear, chrome, or gold, and smoked or clear for shortened models. The standard back box is also available with a flat acrylic window for use in applications where overhead space is minimal. Flat window colors are clear or smoked. All heavy-duty domes feature a clear polycarbonate bubble, 0.090-in. thick, which provides an optimum combination of strength and optical clarity.

Approximate Price: Standard: $340.00; Heavy-duty: $534.95

Note: To use the Cisco 5000 with DF5-PG-E1 an additional "ID-DF5" (Pelco ID Series to DF5 Series Conversion Kit) is required.

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 25

Wall Mounts

SWM-GY

Product Features ● For use with Cisco Video Surveillance 5000 and 2900 Series IP Cameras

● Requires a 1.5-in. NPT pipe thread for installation

● Low-cost cast aluminum construction

● Supports up to 10 lb (4.5 kg)

● Mounting hardware is concealed within the SWM, providing an attractive appearance

● Can be used with the SWM-PA Series pole adapter or SWM-CA Series corner adapter

● For indoor or outdoor applications

Mounting Method The SWM Series wall mount is an indoor or outdoor wall mount for Pelco’s pendant domes in Cisco Video Surveillance 2900 and 5000 Series IP Cameras. Its unique design hides the mounting bolts inside the mount, providing a clean and aesthetically pleasing appearance. It is easy to install and requires no special tools. A gasket is affixed to the base to protect the interior from moisture.

Models SWM-GY Wall mount with cable feed-through; gray finish SWM-BK Same as SWM-GY except black finish SWM-SR Same as SWM-GY except light gray finish SWM-WT Same as SWM-GY except white finish* *SWM mounts require the ID-P adapter for Cisco Video Surveillance 5000 Series IP Cameras

Approximate Price: $43–$48

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 25

IWM Series

Product Features ● For use with Cisco Video Surveillance 5000 and 2900 Series IP Cameras with pendent domes

● Can be secured with 4, 3/8–in. fasteners (not supplied) suitable for mounting surface

● Mounts directly to vertical load-bearing surface for wall mount applications

● Supports up to 75 lb (34 kg) and includes cable feed-through hole

● IWM24 series includes integral 24 VAC, 100 VA transformer for use with Cisco Video Surveillance 2900 Series PTZ Domes

Mounting Method The IWM Series wall mount is designed primarily for Cisco Video Surveillance 5000 and 2900 Series IP Cameras in suspended ball. A 1.5-in. NPT pipe can be used to install the other suspended ball machine.

Models IWM-BK Wall mount with cable feed-through for use with Cisco Video Surveillance 5000 Series with ID-P and Cisco Video Surveillance

2900 Series pendant domes; black finish IWM-GY Same as IWM-BK except gray finish IWM24-BK Wall mount with cable feed-through for use with Cisco Video Surveillance 5000 Series with ID-P and Cisco Video Surveillance

2900 Series pendant domes; includes integral 24 VAC, 100 VA transformer; black finish IWM24-GY Same as IWM24-BK except gray finish

Electrical (IWM24 Series only) ● Input power: 120/240 VAC, 50/60 Hz, switchable via an internal slide switch

● Output power: 24 VAC, 100 VA transformers

● Fuse: One 1.6A, 120 VAC, fast acting, one 500 mA, 240 VAC, fast acting

Approximate Price: IWM: $86; IWM24: $220

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 25

IDM4018 Series

Product Features ● For use with Cisco Video Surveillance 5000 and 2900 Series pendant domes

● Can be secured with four 5/16-in. fasteners (not supplied) suitable for mounting surface

● Aluminum construction (5052H32)

● Mounts directly to vertical load-bearing surface for wall mount applications

● Supports up to 75 lb (34 kg)

● Optional parapet, pole, and corner adapters are available

Mounting Method IWM Series wall mount is designed primarily for Cisco Video Surveillance 5000 and 2900 Series IP Cameras in suspended ball. A 1.5-in. NPT pipe can be used to install the other suspended ball machine.

Models IDM4018 Wall mount with removable front-end cap and feed-through capabilities for use with Cisco Video Surveillance 5000 Series with

ID-P and Cisco Video Surveillance 2900 Series pendant domes.

Approximate Price: $77

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 25

Wall and Rooftop Mounts (Parapet Outdoor Mounts)

PP350

PP351

Product features

● Easy to install

● Aluminum construction

● Maximum load of 45 lb (20.41 kg)

● PP350 mounts to inside or outside of parapet wall

● PP351 mounts to rooftop or smooth horizontal surface

● Swivels for easy installation and access to dome

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 25

● Removable end cap for easy access to wiring

● For use with Cisco Video Surveillance 5000 and 2900 Series pendant domes

Mounting Method The PP350 and PP351 mounts were designed for outdoor use with small-size pendant domes (such as Spectra and DF5 Series), and the PP450 and PP451 are for outdoor use with medium-size pendant domes (such as DF8 Series). The PP350 and PP450 models mount to parapets, while the PP351 and PP451 models mount to rooftops or other smooth horizontal surfaces. All models accommodate domes that use 1.5-in. NPT pipe.

The PP450 and PP451 can be used in applications where mounting and height clearances of models PP350 and PP351 are inadequate.

Models PP350 Parapet wall mount (small dome) PP351 Parapet roof-top mount (small dome) PP450 Parapet wall mount (midsize dome) PP451 Parapet roof-top mount (midsize dome)

Approximate price: PP350: $305; PP351: $323

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 25

Optional Mount Adapters

CM400 Mount (Corner Mount)

CM400: Corner mount adapter; use with IDM4018 and IWM Series

PA402 Mount (Pole Mount)

PA402: Pole mount adapter; use with IDM4018 and IWM Series

Product features ● Low cost

● Rugged construction

● Supports up to 75 lb (34 kg)

● Corner mount adapter for Spectra and legacy wall mounts (IWM Series, IDM4018)

● Design includes mounting studs for quick, simple installation of wall mount

Approximate price: CM400: $55; PS402: $60

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 25

SWM-PA-GY (Pole Mount)

SWM-PA-GY pole adapter to be used with SWM-* Series wall mounts only

Product Features

● Low cost

● Rugged construction

● Supports up to 35 lb (15 kg)

● Design includes mounting studs for quick, simple, installation of wall mount

The SWM-PA Series pole adapter is designed to adapt Pelco’s SWM Series wall mount to a pole. It can be used for either indoor or outdoor applications. The adapter is constructed of aluminum and has a light gray, black, or white polyester powder coat finish.

Models SWM-PA-GY Pole adapter with stainless steel hardware; gray finish SWM-PA-BK Same as SWM-PA-GY except with black finish SWM-PA-WT Same as SWM-PA-GY except with white finish

Approximate Price: $29

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 25

SWM-CA (Corner Adapter)

● Low-cost rugged construction

● Supports up to 35 lb (15 kg)

● Design includes mounting studs for quick, simple installation of wall mount

The SWM-CA Series corner mount adapter is designed to adapt Pelco’s SWM Series wall mount to the end of a wall or the corner of a structure. It can be used for indoor and outdoor applications. The adapter is constructed of aluminum and is available in a light gray or white polyester powder coat finish.

The SWM-CA24 houses a 100 vA transformer that converts 120 or 230 VAC input to 24 VAC. An input voltage selector switch and fuse are provided on the transformer module.

Models SWM-CA Corner adapter; gray finish SWM-CAWT Same as SWM-CA except with White finish SWM-CA24 Same as SWM-CA except includes internal transformer to convert 120 or 230 VAC input to 24VAC

Electrical ● Input power: 120/230 VAC, 50/60 Hz switchable

● Output power: 24 VAC (100 VA transformer)

● Circuit protection: One 1.6A, 120 VAC fast-acting fuse or one 500 mA, 230 VAC slow-blow fuse

Approximate Price: SWM-CA: $73

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 25

Pelco SCA1

The SCA1 is a five-piece structural ceiling adapter for use with Spectra™ and DF5 Series domes. The SCA1 ceiling adapter kit has two L-shaped, 26-in. (66-cm) support rails with slots in each end for mounting Spectra™ and DF5 Series domes in suspended ceilings or for additional support in hard ceilings. In addition to the rails, the kit includes two 7-in. (18-cm) high, galvanized, slotted side panels (Bracket B); a 10 x 10-in. (25.4 x 25.4-cm) mounting panel with a large hole (Bracket A); and mounting hardware.

Approximate Price: $45.95

Example of Mounting

Cisco 5000 in ID-P and SWM-GY

To use the Cisco dome cameras with above wall mounts you will need:

CIVS-IPCA-1010= and CIVS-IPCA-1013=

More Cisco accessories are available at: http://www.cisco.com/en/US/prod/collateral/ps6712/ps9692/ps11267/datasheet_c78-621064.html

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 25

External Power Supplies (for Cisco 5000 and 2900 PTZ Cameras)

TF9000 (Indoor)

Product Features ● Low-cost

● 20 or 50 VA output

● Fuse protection

● Class 2 power (output: 24 VAC, 2A)

The TF Series Power Supply is a 24 VAC Class 2 power supply; it is most suitable for fixed cameras, dome cameras, standalone PTZ cameras (Pelco), and camera enclosures.

These types of power supplies are for indoor use only and can be equipped with a screw inserted into any intermediate 120 VAC wall socket of the duplex. Power at the top of a mounting screw will be inserted instead Block the middle of the screw cap, so firmly fixed to the power outlet

Models

TF2000 20 VA output TF9000 50 VA output

Approximate Price: $30

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 25

MCS16-10S (Indoor)

Product Features ● 2, 5, 10, or 20 amps (A) capacity with 4, 8, or 16 outputs

● Fuse or circuit breaker protection; with spare fuses, fuse models only

● 120 VAC or 240 VAC selectable input

● Provides 24 VAC or 28 VAC output for a longer wire transfer

● Switch with AC power switch power indicator

MCS Series power supplies offer a variety of configurations and it can power up to 16 to a cameras. The power can provide 4, 8, or 16 camera 24 VAC output. To compensate for voltage transmission line losses over long distances, most models will also provide 28 VAC output. The optional 120 and 240 VAC power inputs are safety-installed within the metal shell, which leaves plenty of room for connections and casing access.

Models MCS16-10S,MCS16-10SB, MCS16-20S, MCS16-20SB

All of the power supplies listed above are 16-output power supplies; each output has an independent power switch and LED.

Approximate price: $243–$265

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 25

WCS Series Power (Outdoor)

Product Features ● 4 or 20 amps (A) capacity, camera power supply 1-4

● 120 VAC or 240 VAC selectable input

● Provides 24 VAC or 28 VAC output for a longer wire transfer

● Consistent with all-weather NEMA Type 4X/IP66 standard shield

● WCS4-20B has a Class 2 rated output

WCS Series power supplies offer a variety of different configurations. This type of power supply can power 1 -4 Cameras with 24 VAC output. To compensate for the voltage loss over a longer wire, the WCS4-20 also provides 28 VAC output. There is an optional 120 or 240 VAC power input.

Models WCS1-4 Outdoor camera power supply, 100/120/240 VAC input. 1-way 24/26/28 VAC Output, total current capacity of 4A (100 VA). WCS4-20 Outdoor multi camera power supply, 120/240 VAC input. 4 mounted fuse 24/28 VAC output, total current capacity of 20A (480 VA). WCS4-20B Multi camera outdoor power, 120/240 VAC input. 4 mounted fuse 24/28 VAC output, associated circuitry, total current capacity of

circuit breaker 12A (288 VA).

Approximate Price: $138.95

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 25

Smoked/Clear Bubbles Model Number Dome Size Dome Color Part Number

Cisco Video Surveillance 5000 Series 5.9 in (14.99 cm) Smoked Clear Heavy-duty, clear Chrome Gold

● MF00-7060-084A ● MF00-7060-085A ● MF00-7050-462C ● MF00-7050-564A ● MF00-7050-565A

Cisco Video Surveillance 2900 Series 5.9 in (14.99 cm) Smoked Clear Chrome Gold

● MF00-7050-563A ● MF00-7050-562A ● MF00-7050-564A ● MF00-7050-565A

Cisco Video Surveillance 2611 IP Dome 4.725 in.(12 cm) Smoked Clear

● CIVS-IPCA-1020= ● CIVS-IPCA-1019=

Cisco Video Surveillance 2621 IP Dome 4.725 in.(12 cm) Smoked Clear

● CIVS-IPCA-1005= ● CIVS-IPCA-1004=

Cisco Video Surveillance 2630 IP Dome 4.725 in.(12 cm) Smoked Clear

● CIVS-IPCA-1005= ● CIVS-IPCA-1004=

Note: All part numbers starting with MF* must be ordered from Pelco or third-party vendors.

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 25

Camera Enclosures (Box Camera 2500, 2500W, 2600, 4300, and 4500)

Videoalarm Model – CAEH13

Product Features ● IP network-ready

● Side hinge for easy access when servicing

● Designed to support the Cisco Video Surveillance 2500 Series, 2600 Series, and 4000 Series IP Cameras

● Heater/blower included for defogging/deicing

● Light-duty steel wall/pole mount bracket included

Outdoor environmental housing with standard aluminum body and clear window, featuring a hinged, flip-top opening for use with the Cisco Video Surveillance 2500 Series and 4000 Series IP Cameras.

Product Highlights The environmental CAEH13 is an outdoor housing that can accommodate camera and lens combinations up to 10.5-in. long and 3.6-in. wide. This housing is IP network-ready, and is equipped with a 24 VAC heater/blower. The finish is a shiny white, and the end caps are black polycarbonate. A sunshield and tamper-resistant fasteners are also available.

Approximate Price: $177.77

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 17 of 25

Videoalarm Model – CDAH13 (Cisco 2500W, wireless camera only)

Product Features

● IP network-ready

● Side hinge for easy access when servicing

● Designed to support the wireless Cisco Video Surveillance 2500 Series and 4000 Series IP Cameras

● Dual tri-band (2.4-, 5.3-, 5.8-GHz) wireless antennas

● 24 VAC input, 24 VAC or 12 VDC output

● Heater/blower included for defogging/deicing

● Light-duty steel wall/pole mount bracket included

Outdoor environmental housing with standard aluminum body, clear window, a hinged, flip-top opening, and dual tri-band omni-directional antennas for use with the wireless Cisco Video Surveillance 2500 Series and 4000 Series IP Cameras.

Product Highlights The environmental CDAH13 is an outdoor housing that can accommodate camera/lens combinations up to 10.5-in. long and 3.6-in. wide. This housing is IP network-ready, and is equipped with a 24 VAC heater/blower. The finish is shiny white but end caps are black polycarbonate. Sunshield, tamper-resistant fasteners are also available.

Approximate Price: $237.83

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 18 of 25

Pelco Models (Cisco Box Cameras only)

Pelco EH1512MT

Product Features ● Cost-effective; small, sleek, contemporary design; highly reliable die-cast construction

● Tamper-proof hardware (available as an option with the EH-SKIT Security Kit)

● Designed for indoor/outdoor applications

● Meets IP66 and NEMA standards

● Models available with factory-installed low power heater and blower with 24 VAC power supply

The EH1512 Series is an indoor/outdoor, cost-effective camera enclosure constructed from die-cast aluminum. The EH1512 has a compact body length of 13.38 (base) and 14.39 (overall) inches (33.99 and 36.55 cm, respectively).

EH1512 Series enclosures are for use with analog and IP cameras having both fixed and variable focal length lenses (with or without auto iris operation). The tethered, removable lid provides easy access to the innovative camera sled. Two adjustable glands (PG9 and PG11) on the bottom of the enclosure allow for easy installation of the power and video cables. Field-installed options include a heater and blower with 24 VAC camera power supply and sun shroud. The enclosures also can be factory-ordered with 24 VAC, 120 VAC, or 230 VAC heater and blower with 24 VAC camera power supply and sun shroud.

Approximate Price: $75

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 19 of 25

Pelco EH2508

Product Features ● Designed for maximum waterproofing and dustproofing

● Small, lightweight, aluminum structure

● Meets NEMA Type 4 and IP66 standards

● Can be mounted or used with an electric zoom lens with fixed focus

● Optional accessories include a sun shade and two parts of the heater/defroster

The EH2500 Series shields dust and water and can protect CCTV cameras from adverse environmental conditions. The guard for the aluminum structure, compact size, compact and lightweight. Can be installed on a fixed bracket or head.

The EH2500 Series is suitable for power zoom with a fixed focal length on the different types of cameras. The shield’s diameter is 4.25 in. (10.80 cm), with three lengths: 8 in. (20.32 cm), 12 in. (30.48 cm), and 15 in. (38.10 cm). Each model has a slide for camera installation and a T-shaped handle. It’s easy to install and remove the rear cover future maintenance. Optional accessories include a sun shade and heater in two parts, one for the heater and defroster. When the temperature drops to 70°F (21°C), one part of the start defrosting, when the temperature drops to 40°F (4°C), another part of the enclosure starts defrosting. There are two plugs behind the shield plug for camera and heater wire access.

Approximate Price: $69

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 20 of 25

Pelco EH3512/EH3515

Product Features ● Low-cost

● Small, contemporary design, die-cast and extruded aluminum construction

● Forward-opening hinged lid with rear link-lock latch

● Cable entry glands and mounting holes on bottom of enclosure

● Designed for indoor/outdoor applications

● Models available with factory-installed low-power heater, blower, and defroster, or with heater and defroster

The EH3512/EH3515 Series are indoor/outdoor, low-cost camera enclosures constructed from die cast and extruded aluminum. The EH3512 has a lower body length of 12.75 in. (32.38 cm) and the EH3515 has a lower body length of 15.75 in. (40.00 cm).

These enclosures are for use with cameras having fixed focal length lenses or motorized zoom lenses (with or without auto iris operation). The front hinged lid provides easy access to the removable camera sled. Two adjustable (PG13.5) glands on the bottom of the enclosure allow for easy installation of the power and video cables. The rear link-lock latch can be used with a padlock of suitable size to secure the enclosure. Field-installed options include heater-defroster, blower, and sun shroud. The enclosures can also be factory-ordered with a low-power 24V, 120V, or 230V heater-defroster and blower, or a heater-defroster only.

Approximate Price: $260

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 21 of 25

Pelco EH5723

Product Features ● Built-in heater and blower

● All-aluminum construction

● Gas-spring assisted, forward-opening lid

● Pad lockable link latch

EH5700 Series indoor/outdoor cover designed for Pelco's medium-and-heavy PTZ or fixed mounting bracket. Aluminum structure, a length of 23 feet (58.42 cm) (EH5723) and 29 feet (73.66 cm) (EH5729), these shields with acceptable A fixed focus lens or a large format electric zoom camera.

The Pelco EH5723-1 is a large camera housing designed for outdoor applications, with a rugged body in conjunction with a built-in heater and blower offering effective camera protection in various weather conditions. The housing accommodates camera and lens combinations up to 15.5-in. in length and includes an adjustable camera sled which can be inverted or removed. A gas-spring-assisted, forward-opening lid provides easy access to the camera for lens adjustments or servicing and can be secured by an optional pad-lock. This housing installs on a wall or pedestal using optional Pelco fixed or pan/tilt mounting hardware.

Approximate Price: $345

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 22 of 25

Pelco EH4700DB

Product Features ● Indoor/outdoor applications, all-aluminum construction

● Bottom-opening access door, cable entry glands, and mounting holes located on top

● Factory/field-installed accessories

● Suitable for mounting in parking garages and under building eaves or installations where wall mounting is not practical

The EH4700DB Series are indoor/outdoor enclosures constructed from die cast and extruded aluminum. They are available in 13-in. (33.02 cm) (EH4712DB) or 18-in. (45.72 cm) (EH4718DB) lengths. Both enclosures will accept cameras with either fixed focal length lenses or motorized zoom lenses. Models with factory-installed heater and blower feature a prewired PC board with internal electronics to simplify installation and setup of camera and enclosure accessories.

Unlike other enclosures, the EH4700DB Series opens from the bottom and the camera sled is attached to the top of the enclosure. Internal adjustments can be made without interfering with the video because the camera remains in its normal viewing position. Cable entry glands and mounting holes are located on the top of the enclosure, making it ideal for ceiling applications, especially where limited accessibility is a concern. The EH4700DB Series is available with factory-installed heaters and blowers. Optional field-installed accessories include a window defroster, preset positioning lens wiring harness, 120 VAC electrical outlet, and lock kit.

Approximate Price: $140

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 23 of 25

Pelco EHX6E

Product Features ● Aluminum structure with adjustable mounting bracket

● 4-in. (10.16 cm), 6 in. (15.24 cm), and 8-in. (20.32 cm) diameter

● Suitable for a variety of harsh and dangerous environments, including marine environments

● •Meets NEMA Type 4X and IP66 standards for fixed mounting bracket or explosion-proof head Extreme environments call for extreme monitoring equipment.

The Pelco EHX6E camera housing is built from metal material tough enough to withstand an explosion, and offers a high degree of water and dust resistance. After the smoke and dust settles, the camera will emerge unscathed, having recorded it all. Because of this level of resilience, this housing is commonly employed in volatile and hazardous monitoring situations around the world. You can use this housing with a fixed mount, or combine it with a Pelco explosion-proof P/T unit to form a complete, motorized, explosion-proof surveillance system.

Explosion-Proof Housing This housing meets stringent standards requirements for explosion-, dust-, and ignition-proofing for electronic equipment in a hazardous location. It is suitable for use in prisons, military installations, chemical factories, construction sites, marine applications, and similar harsh, volatile, or hazardous environments.

Water- and Dust-Proof The sealed nature of this housing also is effective in keeping out moisture and dust.

Approximate Price: $1049.95

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 24 of 25

Pelco EH2100 (Indoor, In-Ceiling Housing)

Product Features ● Low-profile, “wedge” style

● Designed for medium-to-large-format cameras

● For use in fixed or dropped (false) ceilings

● Hinged door opens for convenient access to camera

● Select from riveted or fully welded and sealed back box models

The EH2100 and EH2100P are low-profile ceiling enclosures designed for use with medium-to-large format cameras. The unobtrusive, compact design complements any business or office decor. The enclosures are designed for use in fixed or dropped (false) ceilings. The upper section mounted above the ceiling is constructed of aluminum. The EH2100 has a riveted back box and the EH2100P has a fully welded and sealed back box. Because of its lightweight design, the enclosure can be mounted directly on a ceiling tile without the use of an additional mounting plate. Pelco offers an optional 360-degree rotating mounting plate (E2100) for false ceiling applications, which allows the enclosure to be rotated in 10-degree increments to change the viewing area.

The EH2100 and EH2100P are engineered for ease of installation and service. The lower section is hinged to provide convenient access for camera and lens adjustments. The adjustable camera mounting sled allows the camera to be positioned vertically or horizontally, depending on the camera size. A Phillips screw at the front of the enclosure secures the cover.

Approximate Price: $99.95

Data Sheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 25 of 25

PoE Technologies (PoE-H-HB)

Product Features

● All die-cast aluminum construction (Indoor/outdoor usage)

● Plug-and-play, heater- and blower-powered via PoE (IEEE 802.3af PoE [48 VDC])

● IP66 and NEMA 4X rated

● IP67 RJ-45 Panel Connector with 10/100 Mbps Ethernet

● Forward-opening hinged lid with rear link-lock latch

The PoE-H-HB-C Camera Enclosure is designed for Cisco Video Surveillance 2500, 2600 and 4500 Series IP Cameras and uses Power over Ethernet (PoE) to reduce the cost of installation. A single Cat5/Cat6 cable can provides both power and data, allowing for quick and easy installation. Integration in a harsh environment the RJ-45 panel connector on the bottom of the enclosure allows for quick and effective PoE installation.

Standard features for the PoE IP Camera Enclosure include wall mount, heat shroud, heater, and fan. Constructed from die-cast aluminum and UV-rated glass, and has no plastic parts. Pre-terminated RJ-45 connector with a quick removable camera sled allows simple installation of any camera. Flip-top lid for easy access to camera sled, 10-mm gasket for liquid tight protection, and eye latch can that be used for locking and securing the enclosure.

1W Power Consumption Blower ● Heater On: 5ºC (41ºF); Off: 15ºC (59ºF)

● Blower On: 40°C (104ºF); Off: 25ºC (77ºF)

Approximate Price: $225

Printed in USA C78-649932-00 02/11