Cisco CCNA Video 200-001 Exam - Miscrosoft … · Ensurepass.com Easy Test! Easy Pass! Download the...

Ensurepass.com Easy Test! Easy Pass!

Download the complete collection of Exam's Real Q&As www.ensurepass.com

Cisco CCNA Video 200-001 Exam

Vendor：Cisco

Exam Code: 200-001

Exam Name: Implementing Cisco Video Network Devices (VIVND)



QUESTION 1

Which scheduling and management application can be installed on any hardware platform that

meets the minimum specifications that the end customer decides to deploy?

A. Cisco Video Communications

B. Cisco TelePresence Management Suite

C. Cisco Digital Media Manager

D. Cisco TelePresence Management Switch

E. Cisco Unified Communications Manager

Correct Answer: B

QUESTION 2

When scheduling a multipoint conference, which three devices are required for the conference to

be scheduled and completed successfully? (Choose three.)

A. Cisco Unified Communications Manager

B. multipoint control unit

C. video conferencing endpoints

D. Cisco Unity Connection

E. Cisco Unified IM and Presence

Correct Answer: ABC

QUESTION 3

Which encoder is best suited for professional, studio-quality audio and video processing?

A. Scientific Atlanta Encoder

B. Cisco Digital Media Encoder 1000

C. Cisco Digital Media Encoder 2000

D. Cisco Digital Media Encoder 3000

Correct Answer: C

QUESTION 4

Which of these is the core component of the Cisco Video Surveillance product suite that handles

recording and serving of video feeds?

A. Video Communications Server

B. Cisco IP camera

C. Cisco Video Surveillance Operations Manager



D. Cisco Video Surveillance Media Server

Correct Answer: D

QUESTION 5

Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server?

A. Video Communications Server

B. Cisco Video Surveillance Operations Manager

C. Cisco Video Surveillance Media Server

D. Cisco Video Surveillance Transcoding and Encoding Server

E. Cisco Video Surveillance Virtual Matrix

Correct Answer: B

QUESTION 6

Cisco Video Surveillance Video Encoder cards perform which function?

A. the ability to use existing analog equipment with an IP-enabled video surveillance system

B. the ability to convert low-resolution video to high-definition video for video surveillance

C. the ability to stream digital media to digital media in an IP-enabled video recording

environment

D. the ability to encrypt raw video signals to secure video signals

Correct Answer: A

QUESTION 7

In an ISR Cisco Video Management and Storage System, what is the maximum storage capacity

allowed per module?

A. 1 TB per module

B. 2 TB per module

C. 3 TB per module

D. 500 MB per module

E. 750 MB per module

F. 850 MB per module

Correct Answer: A

QUESTION 8

Which two issues does utilizing an IP network storage solution for IP video surveillance help



overcome? (Choose two.)

A. analog to IP conversion

B. large, expandable storage space

C. physical security

D. scalability

E. faster bit rate for storage

Correct Answer: BD

QUESTION 9

Which Cisco TelePresence multipoint platform utilizes only Cisco Unified Communications Manager

for call control?

A. Cisco TelePresence Multipoint Control Unit

B. Cisco TelePresence Multipoint Switch

C. Cisco TelePresence Server

D. Cisco TelePresence Media Bridge Server

E. Cisco TelePresence System 500-32

F. Cisco TelePresence SX20

Correct Answer: B

QUESTION 10

Which Cisco Video Surveillance device is responsible for providing video streams to monitors after

the respective layouts and views are received by the monitors?

A. Cisco IP Video Surveillance Operations Manager

B. Cisco IP Video Surveillance Virtual Matrix Viewer

C. Cisco Video Surveillance Manager

D. Cisco Video Surveillance Media Server

Correct Answer: D

QUESTION 11

Which of these involves combining visual elements from separate sources into a single image?

A. interlacing

B. compositing

C. video conferencing

D. interleaving



Correct Answer: B

QUESTION 12

Which well-known port is used to access the Cisco IP Video Surveillance Operations Manager via a

secure, ActiveX web session?

A. 20

B. 80

C. 421

D. 434

E. 443

F. 8080

Correct Answer: E

QUESTION 13

Which two of these are considered to be provisioning and scheduling management tools in a Cisco

TelePresence environment? (Choose two.)

A. Cisco TelePresence Manager

B. Cisco Video Surveillance Operations Manager

C. Cisco TelePresence Management Suite

D. Cisco TelePresence Multipoint Control Unit

E. Cisco Video Surveillance Management Server

Correct Answer: AC

QUESTION 14

Which of these needs to be enabled in Cisco Unified Communications Manager in order for the

Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence

System Codec C40 endpoint that is registered to a VCS?

A. allow iX application media

B. send send-receive SDP in mid-call invite

C. allow presentation sharing using BFCP

D. allow presentation sharing using H.235

E. deliver conference bridge identifier

Correct Answer: C



QUESTION 15

What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco

TelePresence Multipoint Switch?

A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence

Multipoint Switch is a software bridge.

B. The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and non-

immersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non-

immersive endpoints.

C. The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching.

The Cisco TelePresence Multipoint Switch provides active presence.

D. The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms, whereas the

Cisco TelePresence Multipoint Switch has a latency of 100 ms.

Correct Answer: A

QUESTION 16

When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System

Codec C40, which FECCs are available?

A. Only zoom-in and zoom-out are available.

B. Only left and right are available.

C. Only up and down are available.

D. No FECC is available.

E. Left, right, up, down, zoom-in, and zoom-out are all available.

Correct Answer: E

QUESTION 17

Which statement is correct regarding the difference between Multisite and Multiway conferencing?

A. Multisite requires configuration on the endpoint, whereas Multiway requires the Multiway

options key to be installed.

B. Multisite requires the presence of a multipoint control unit, whereas Multiway relies on the

endpoint conferencing capability.

C. Multisite is used to conference in multiple sites, whereas Multiway is intrasite multipoint

conferencing.

D. Multisite requires the Multisite options key to be installed and configured at the endpoint,

whereas Multiway requires a Cisco TelePresence Video Communications Server and a

centralized multipoint control unit.



Correct Answer: D

QUESTION 18

Which of these devices require configuration in order for an endpoint to initiate a Multiway

conference?

A. endpoint only

B. Cisco TelePresence Video Communications Server only

C. multipoint control unit only

D. endpoint and multipoint control unit only

E. endpoint and Cisco TelePresence Video Communications Server only

F. endpoint, Cisco TelePresence Video Communications Server, and multipoint control unit

Correct Answer: F

QUESTION 19

Refer to the exhibit. Which multipoint feature can be configured using the exhibit that was taken

from the Cisco TelePresence Video Communications Server?

A. Multisite

B. Multiway

C. both Multisite and Multiway

D. Multiway conferences between devices that are registered only to the local Cisco

TelePresence Video Communications Server

E. Multisite conferences between Cisco Video Jabber for TelePresence devices only

Correct Answer: B

QUESTION 20



Which two Cisco TelePresence systems would be appropriate for an executive personal office?

(Choose two.)

A. Cisco Jabber

B. Cisco IP Video Phone E20

C. Cisco TelePresence EX Series

D. Cisco Jabber Video for TelePresence

E. Cisco TelePresence System 500

Correct Answer: CE

QUESTION 21

Refer to the exhibit. You have just finished installing a 65-inch dual profile system in a multipurpose

room. After powering up the entire system, only one display is used. Using the information in the

exhibit, why is the second display not displaying anything from the system?

A. The Cisco TelePresence profile systems do not support dual display.

B. The display is not powered on.

C. The dual display option key has not been input into the codec.

D. The codec has the appropriate option keys installed, so either the display is not cabled

correctly, the codec is configured incorrectly, or there is no input being sent to the display.

Correct Answer: D

QUESTION 22



Threat monitoring in physical access security can be based upon which three of these? (Choose

three.)

A. doors

B. badges

C. age

D. weather

E. height

F. fingerprints

Correct Answer: ABF

QUESTION 23

When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used

for camera control?

A. an Ethernet crossover cable (RJ45-to-RJ45)

B. an Ethernet cable (RJ45-to-RJ45)

C. a serial cable (DB25-to-DB9)

D. a VISCA cable (DB9-to-RJ45)

Correct Answer: D

QUESTION 24

During the initial setup of the Cisco TelePresence System 500, you are required to do an initial

camera setup that fails. What might be a primary reason that the failure occurs?

A. The camera cannot focus on the target.

B. The room is too dark.

C. The system is too far away from the target.

D. The cable to the camera is not connected correctly.

Correct Answer: B

QUESTION 25

Which statement is true about the Cisco TelePresence System 500-32 system regarding the HVAC

needs for the room where it is installed?

A. The system does not require any additional requirements above the normal HVAC

requirements for the room.

B. You must supply additional cooling requirements for the room.

C. You must supply a room that has energy-efficient lighting to reduce the temperature of the

room.



D. The temperature of the room will be 10 to 20 degrees warmer than the rest of the building.

Correct Answer: A

QUESTION 26

What is the optimum distance for a person sitting using the Cisco TelePresence System 500?

A. the camera can adjust automatically

B. 0.5 meters and 0.75 meters (1.5 and 2.5 feet)

C. 1.2 meters and 1.8 meters (4 and 6 feet)

D. 3.0 and 5.0 meters (10 and 15 feet)

Correct Answer: C

QUESTION 27

You have installed a C-Series endpoint in an office where DHCP is not supported. At a minimum,

which four network items must be configured for the endpoint to be able to register with H.323 on

a Cisco TelePresence Video Communication Server located at the external headquarters location?

(Choose four.)

A. unique IPv4 address

B. subnet mask

C. default gateway

D. Cisco VCS IPv4 address

E. Active Directory IPv4 address

F. SMTP server IPv4 address

Correct Answer: ABCD

QUESTION 28

Which two additional items can be configured for an endpoint to register with the Cisco

TelePresence Video Communication Server for H.323 to function correctly? (Choose two.)

A. unique system ID

B. unique H.323 ID

C. unique DNS entry ID

D. unique E.164 alias

E. unique real-time transport protocol port numbers

F. unique NTP server IPv4 address



Correct Answer: BD

QUESTION 29

Which two additional items must be configured for an endpoint to register manually with the Cisco

TelePresence Video Communication Server for the SIP to function correctly? (Choose two.)

A. E.164 alias

B. H.323 ID

C. SIP uniform resource indicator

D. configured SIP registrar and proxy server

E. NTP server IPv4 address

F. unique system ID

Correct Answer: CD

QUESTION 30

What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

A. Option 150 is not important.

B. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file

while booting.

C. It is the IPv4 address of the default gateway for the subnet that the video endpoint is

connected to.

D. It is the configured SIP registrar and proxy server.

E. It is the unique NTP server IPv4 address.

Correct Answer: B

QUESTION 31

Refer to the exhibit. Which SIP URI should be dialed in order to reach the endpoint that is registered

with the IP address of 172.29.1.221 from another endpoint with a URI of

sip:[email protected]?



A. 52900121

B. sip:[email protected]

C. [email protected]

D. 172.29.1.221

E. ex90

Correct Answer: B



QUESTION 32

Refer to the exhibit. Which two strings that could be dialed to start a multipoint conference that is

hosted by the multipoint control unit? (Choose two.)

A. 52900121

B. [email protected]

C. [email protected]

D. 5919

E. ex90

F. [email protected]

Correct Answer: DF

QUESTION 33

Refer to the exhibit. You must dial the interactive response system of the multipoint control unit.

What are the appropriate dual-tone multi-frequency digits to create an ad-hoc conference with an

identifier of 2345?



A. 2345

B. 2345#

C. 5919*2345

D. 5919*2345#

Correct Answer: D

QUESTION 34

When you register the Cisco TelePresence System 500-32 video system with the Cisco Unified

Communications Manager, what is the most important item for the registration to be input into

the server?

A. The IPv4 address of the Cisco TelePresence System 500-32.

B. The IP telephone media access control address that is used to manage the system.

C. The media access control address of the Ethernet port of the Cisco TelePresence System 500-



32.

D. The Cisco TelePresence System 500-32 will always automatically register with the Cisco Unified

Communications Manager server.

Correct Answer: C

QUESTION 35

Refer to the exhibit. Under which tab can the log file for the endpoint be found?

A. Diagnostics

B. Configuration

C. Call Control

D. Maintenance

Correct Answer: A

QUESTION 36

Refer to the exhibit. What can be deduced from the log shown in the exhibit, which was taken from

a Cisco TelePresence Codec C60?



A. A direct call to 52902511 is being made.

B. A Multiway call to [email protected] is being made.

C. No calls are being attempted by the endpoint.

D. A BFCP call is being initiated.

E. The endpoint is receiving a call from the VCS.

Correct Answer: B

QUESTION 37

Refer to the exhibit. Under which tab can the registration status for the endpoint be found?



A. Diagnostics

B. Configuration

C. Call Control

D. Maintenance

Correct Answer: A

QUESTION 38

While performing a password recovery on a Cisco TelePresence endpoint, what is the maximum

amount of time for input to be received by the device before the system exits the password

recovery mode?

A. 15 seconds

B. 20 seconds

C. 30 seconds

D. 40 seconds

E. 60 seconds

Correct Answer: E

QUESTION 39

Which two of these are required in order to complete the password recovery of a Cisco

TelePresence System endpoint? (Choose two.)

A. must have FTP enabled on the endpoint

B. must have SSH enabled on the endpoint

C. must have the security question answer for the endpoint

D. must be in the same room as the main display

E. must have SFTP enabled on the endpoint

F. must call Cisco TAC for the security code

Correct Answer: BD

QUESTION 40

Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)

A. automatic software update and release keys



B. intelligent call routing engine

C. provisioning a Cisco TelePresence System endpoint

D. tracing SIP and H.323 calls

E. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified

Communications Manager

F. rebooting endpoints that are registered to the Cisco TelePresence Video Communications

Server

Correct Answer: ABF

QUESTION 41

Refer to the exhibit. When the administrator clicks the ticket number of any of the open tickets,

which two actions are presented to the administrator? (Choose two.)

A. ignore ticket

B. acknowledge ticket

C. delete ticket

D. close ticket

E. escalate ticket

Correct Answer: AB

QUESTION 42

Refer to the exhibit. Which system tab can be used to add video infrastructure devices and

endpoints?



A. Navigator

B. System Overview

C. Configuration Templates

D. Provisioning

E. Administrative Tools

Correct Answer: A

QUESTION 43

You have been informed from the field that a new Cisco TelePresence video endpoint has been

deployed with an IPv4 address of 172.28.254.45. You need to check for connectivity from the Cisco

Unified Communications Manager server. Which command should be entered to check for network

connectivity?

A. utils network traceroute newsystem.domain254.local

B. utils network ping 172.28.254.45

C. ping 172.28.254.45

D. traceroute 172.28.255.255

E. utils network host cucm.osl147.local

Correct Answer: B

QUESTION 44

Refer to the exhibits. The screenshots show outputs from the xStatus of a Cisco TelePresence

endpoint and the VCS registrations. What are the protocol and direction of the call, the called

party, and the transmit rate of the call?



A. h.323, incoming, 5919*2345, 1152 Kb/s

B. h.323, outgoing, 5919*2345, 1152 Kb/s

C. h.323, incoming, 5919*2345, 768 Kb/s

D. sip, incoming, 5919*2345, 768 Kb/s

E. sip, outgoing, 5919*2345, 768 Kb/s



Correct Answer: B

QUESTION 45

Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video

system to a factory condition?

A. utils factory reset 2

B. utils system factory init

C. xcommand defaultvalues set level: 2

D. xconfiguration default factory

E. utils reset factory

F. xcommand SystemUnit FactoryReset

Correct Answer: B

QUESTION 46

What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence?

A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber

Video for TelePresence registers to the VCS.

B. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager,

whereas Cisco Jabber registers to the VCS.

C. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence

has video capabilities.

D. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence has

presence capabilities.

E. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They

should not coexist in the same network.

Correct Answer: A

QUESTION 47

Refer to Exhibit. Which two of these can cause the phone status error icon that is shown in the

exhibit? (Choose two.)



A. The Cisco Unified Communications Manager IM and Presence Service is not available.

B. The username and password in Cisco Jabber phone services are misconfigured.

C. The Cisco Jabber initial audio and video settings need to be set.

D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified

Communications Manager.

E. The Cisco Jabber does not have the correct phone button template and hence cannot

register to the Cisco Unified Communications Manager.

F. The called user presence status is unknown.



Correct Answer: BD

QUESTION 48

Which two of these can cause registration problems for a Cisco TelePresence Codec C40 endpoint

running in H.323 mode? (Choose two.)

A. The IP default gateway address is incorrect for the endpoint.

B. The H.323 license stack is not added to the endpoint.

C. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS.

D. The E.164 H323Alias has not been configured on the endpoint.

E. The URI address has not been configured on the endpoint.

Correct Answer: AD

QUESTION 49

Which three Cisco TelePresence multipoint media conferencing platforms can utilize Cisco Unified

Communications Manager for call control? (Choose three.)

A. Cisco TelePresence Multipoint Control Unit

B. Cisco TelePresence System 500-32

C. Cisco TelePresence Server

D. Cisco TelePresence Media Bridge Server

E. Cisco TelePresence Multipoint Switch

F. Cisco TelePresence SX20

Correct Answer: ACE

QUESTION 50

Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch?

(Choose two.)

A. enhanced continuous presence

B. active speaker switching

C. continuous presence

D. speaker switching

E. room switching

F. active continuous presence

Correct Answer: DE



QUESTION 51

Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one

conference participant over the other conference participants while still allowing conference

participants to view multiple participants at the same time?

A. enhanced continuous presence

B. active speaker

C. continuous presence

D. room switching

E. speaker switching

Correct Answer: A

QUESTION 52

Which two systems would be an appropriate solution for a traveling employee? (Choose two.)

A. Cisco Jabber

B. Cisco C-Series codec

C. Cisco TelePresence EX Series

D. Cisco Jabber Video for TelePresence

E. Cisco TelePresence System 500

F. Cisco IP Video Phone E20

Correct Answer: AD

QUESTION 53

What are the best practices for maintaining a high-quality video call regarding latency, jitter, and

packet loss?

A. 20-ms one-way delay, no jitter, no packet loss

B. less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss

C. 150- to 400-ms one-way delay, 50-ms jitter, 5 percent packet loss

D. 500-ms one-way delay, 50-ms jitter, 5 percent packet loss

Correct Answer: B

QUESTION 54

Refer to the exhibit. Which configuration element can be used to specify the Multiway address

that can be used by the endpoint to initiate Multiway calls?



A. Conference 1

B. NetworkServices

C. Provisioning

D. SIP Profile 1

E. Video

Correct Answer: B

QUESTION 55

An important Cisco TelePresence video multipoint call is in progress and you are getting complaints

of pixilation of the video and poor audio quality on one of the involved systems. Which page would

be a good place to start for troubleshooting the issue on the affected endpoint?

A.



B.

C.

D.

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: A



QUESTION 56

Which two of these support an ad-hoc conference call? (Choose two.)

A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco

TelePresence Video Communications Server

B. using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to

start in 5 minutes

C. using the Booking tab in the Cisco TelePresence Management Suite to configure a new

conference

D. using the tab Administrative Tools > Configuration > Conference Settings in the Cisco

TelePresence Management Suite

E. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call

Correct Answer: AE

QUESTION 57

You have been informed from the field that a new Cisco TelePresence video endpoint has been

deployed with an IPv4 address of 172.28.254.45. Which three devices could you use to see if the

endpoint is registered and available for a call? (Choose three.)

A. Cisco Unified Communications Manager server

B. Cisco Gigaswitch Router

C. Cisco TelePresence Manager Suite server

D. Active Directory server

E. Cisco TelePresence Video Communication Server

F. Cisco 3250 Layer 2/3 Switch

Correct Answer: ACE

QUESTION 58

Refer to the exhibit. Which tab can be used in order to check the call statistics for the Cisco

TelePresence Codec C60?



A. Diagnostics

B. Configuration

C. Call Control

D. Maintenance

E. The GUI cannot be used to view call statistics.

Correct Answer: C

QUESTION 59

Cisco TelePresence Video Communication Servers can be clustered to provide resiliency in the

enterprise. What is the maximum number of cluster members?

A. 2

B. 3

C. 6

D. 7

E. 15

Correct Answer: C

QUESTION 60

Which component of the Cisco TelePresence multipoint media infrastructure is intended for use

only with non-immersive endpoints?

A. Cisco TelePresence Server


C. Cisco TelePresence Multipoint Switch

D. Cisco TelePresence Multipoint Control Unit

Correct Answer: D

QUESTION 61

Which Cisco TelePresence endpoint uses only Cisco Unified Communications Manager as its call

control device?

A. SX20


C. EX90

D. C60

E. Video Communication Server



Correct Answer: B

QUESTION 62

When manual discovery is used to register a Cisco TelePresence endpoint to a VCS via SIP, which

two pieces of information are required to be configured on the endpoint for registration to occur,

assuming that Cisco TMS and DNS are not being used? (Choose two.)

A. option 150

B. SIP URI

C. proxy address

D. H.323 alias

E. external manager address

F. RTP ports

Correct Answer: BC

QUESTION 63

Which three of these are valid ways to initially configure a C-Series codec in a network where DHCP

is not used? (Choose three.)

A. Tandberg Remote Control V

B. secure copy program

C. CLI using a console cable

D. touchscreen interface

E. secure web browser

F. Telnet

Correct Answer: ACD

QUESTION 64

When dialing, in a format that is consistent for all users of a system, a user who has multiple

TelePresence video devices associated, what are the three minimum requirements that must be

configured for the user to be able to receive video calls? (Choose three.)

A. The Active Directory server must be installed.

B. Ensure that the Cisco TelePresence Video Communications Server has the FindMe option key

installed.

C. Ensure that FindMe is set to on.

D. The NTP server must be set up.

E. The Cisco TelePresence Management Suite must be installed.



Correct Answer: BCE

QUESTION 65

A user wants to use the One Button to Push feature on a Cisco TelePresence System 500-32 video

endpoint. Which configuration tool should be used to allow the One Button to Push feature to work?

A. Cisco Unified Communications Manager server, phones, devices, One Button to Push

B. Cisco Gigaswitch Router, Call Manager Express, One Button to Push

C. Cisco TelePresence Manager Suite server, new conference, set Conference type to One Button

to Push

D. Active Directory server, users, new conference, One Button to Push

E. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push

Correct Answer: C

QUESTION 66

Which configuration is needed in order for Cisco Jabber Video for TelePresence to initiate Multiway

calls?

A. Configure the Multiway address under Video Settings in the Cisco Jabber Video for

TelePresence client.

B. Configure the Mutliway URI address under TelePresence Management Suite > Systems >

Provisioning > Users > Configuration Template.

C. Configure the Mutliway URI address under Cisco TelePresence Video Communications

Server > Applications > Cisco Jabber Video for TelePresence.

D. The Cisco Jabber Video for TelePresence only supports Multisite calls, which is enabled by

default.

Correct Answer: B

QUESTION 67

What is the correct order of steps to schedule a One Button to Push conference call between a

Cisco TelePresence System 500 and a Cisco TelePresence Codec C40?

A. Configure the One Button to Push field under device configuration for the Cisco TelePresence

System 500 and Codec C40.

B. Configure One Button to Push under Cisco TelePresence Video Communications Server >

Applications > OBTP Configuration.

C. Configure a new conference under Cisco TelePresence Management Suite > Booking New

Conference > Type.



D. The One Button to Push feature cannot be configured without a scheduling plug-in application

such as Microsoft Outlook.

E. Configure the Scheduler tool in the Cisco TelePresence Management Suite.

Correct Answer: C

QUESTION 68

When configuring the Cisco TelePresence System 500 with a static IP address, where should the IP

address be configured?

A. in Cisco Unified Communications Manager after adding the Cisco TelePresence System 500

manually

B. in the Cisco TelePresence System Administration tool

C. in the Cisco TelePresence Management Suite after the Cisco TelePresence System 500 was

added under systems

D. Static IP address configuration is not possible. Only a DHCP-provided IP address is supported.

E. using the on-screen display

Correct Answer: B

QUESTION 69

Refer to the exhibit. When the Cisco Jabber Video for TelePresence fails to register with the server,

which two fields should be configured at a minimum, assuming SRV records are not configured?

(Choose two.)



A. the internal or external DNS server name for the Cisco TelePresence Video Communications

Server

B. the internal DNS server name for the Cisco TelePresence Management Suite

C. the SIP domain

D. the IP address of the Cisco TelePresence Management Suite for the internal server

E. the IP address of the Cisco Unified Communications Manager for the internal server

Correct Answer: AC

QUESTION 70

Refer to the Exhibits, in order to create a scheduled or ad-hoc multipoint conference, which two

tolls can be used? (Choose two)



A. Exhibit A

B. Exhibit B

C. Exhibit C

D. Exhibit D

E. Exhibit E

Correct Answer: AC

QUESTION 71



Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint.

What are two valid ways to accomplish this task? (Choose two.)



A. Exhibit A

B. Exhibit B

C. Exhibit C

D. Exhibit D

E. Exhibit E

Correct Answer: AD

QUESTION 72

Refer to the exhibits. The C-Series endpoint (codec) does not register with the Video

Communication Server that is located in a different network. Based on the exhibits, what could be

causing the issue?



A. The subnet mask on the codec is incorrect.

B. The ip address of the codec is incorrect.

C. The interface that the codec is in is in the wrong VLAN.

D. The codec did not receive a DHCP address from the DHCP server.

Correct Answer: A

QUESTION 73

Refer to the exhibits. When the Cisco Jabber usertries to call extension 3501, Cisco Jabber never

places the call No errors or messages are seen and no reordertone is heard. Assuming that the

Cisco Jabber calling search space is configured correctly in Cisco Unified Communications Manager,

which of these could be causing this issue?

Ensurepass.com Members Features:

1. Verified Answers researched by industry experts.

2. Q&As are downloadable in PDF and VCE format.

3. 98% success Guarantee and Money Back Guarantee.

4. Free updates for 180 Days.

View list of All Exam provided:

http://www.ensurepass.com/certfications?index=A

To purchase Lifetime Full Access Membership click here:

http://www.ensurepass.com/user/register

Valid Discount Code for 2014: SFOH-FZA0-7Q2S

To purchase the HOT Exams:

Cisco CompTIA Oracle VMWare IBM

100-101 640-554 220-801 LX0-101 1Z0-051 VCAD510 C2170-011

200-120 640-802 220-802 N10-005 1Z0-052 VCP510 C2180-319

300-206 640-816 BR0-002 SG0-001 1Z0-053 VCP550 C4030-670

300-207 640-822 CAS-001 SG1-001 1Z0-060 VCAC510 C4040-221

300-208 640-864 CLO-001 SK0-002 1Z0-474 VCP5-DCV RedHat

350-018 642-467 ISS-001 SK0-003 1Z0-482 VCP510PSE EX200

352-001 642-813 JK0-010 SY0-101 1Z0-485 EX300

400-101 642-902 JK0-801 SY0-301 1Z0-580

640-461 700-302 1Z0-820

http://www.ensurepass.com/certfications?index=A

http://www.ensurepass.com/user/register

http://www.ensurepass.com/cisco.html

http://www.ensurepass.com/comptia.html

http://www.ensurepass.com/oracle.html

http://www.ensurepass.com/VMWare.html

http://www.ensurepass.com/ibm.html

http://www.ensurepass.com/100-101.html



http://www.ensurepass.com/lx0-101.html

http://www.ensurepass.com/1z0-051.html

http://www.ensurepass.com/VCAD510.html

http://www.ensurepass.com/C2170-011.html




http://www.ensurepass.com/n10-005.html


http://www.ensurepass.com/VCP510.html




http://www.ensurepass.com/BR0-002.html

http://www.ensurepass.com/sg0-001.html


http://www.ensurepass.com/VCP550.html




http://www.ensurepass.com/CAS-001.html

http://www.ensurepass.com/sg1-001.html


http://www.ensurepass.com/VCAC510.html




http://www.ensurepass.com/CLO-001.html

http://www.ensurepass.com/sk0-002.html


http://www.ensurepass.com/VCP5-DCV.html

http://www.ensurepass.com/redhat.html



http://www.ensurepass.com/ISS-001.html

http://www.ensurepass.com/sk0-003.html


http://www.ensurepass.com/VCP510PSE.html

http://www.ensurepass.com/EX200.html



http://www.ensurepass.com/JK0-010.html

http://www.ensurepass.com/sy0-101.html


http://www.ensurepass.com/EX300.html



http://www.ensurepass.com/JK0-801.html

http://www.ensurepass.com/sy0-301.html





http://www.ensurepass.com/apple.html

http://www.ensurepass.com/citrix.html

http://www.ensurepass.com/comptia.html

http://www.ensurepass.com/microsoft.html

http://www.ensurepass.com/oracle.html

http://www.ensurepass.com/cisco.html

Cisco CCNA Video 200-001 Exam - Miscrosoft … · Ensurepass.com Easy Test! Easy Pass! Download the...

Documents

Transcript of Cisco CCNA Video 200-001 Exam - Miscrosoft … · Ensurepass.com Easy Test! Easy Pass! Download the...