CIRCULAR TABLE SERIES - bassamfellows.combassamfellows.com/content/downloads/BassamFellows... ·...
Transcript of CIRCULAR TABLE SERIES - bassamfellows.combassamfellows.com/content/downloads/BassamFellows... ·...
881 Ponus Ridge, New Canaan 06840, Connecticut, +1.212-941-5900, [email protected], www.bassamfellows.com
CIRCULAR TABLE SERIES
The Circular Table Series marries pure
geometry with high craft, resulting in a simple
but elegant circle engineered in solid wood.
From above, the piece emanates a strong
geometric identity given that the circle is
divided equally into wedge shapes with the
grain of the wood radiating from the center.
The table top is cut into three equal segments
separated by a 1/4” reveal and held together
on the underside with a solid brass ring. The
reveal allows the pie-shaped solid wood
wedges to move freely with variations in
humidity eliminating warping and splitting.
A sturdy but agile floating presence is created
by the table’s base, made from circular
sections of solid naval brass – not hollow
tubing – allowing the legs to be bent to the
tightest possible radius for elegance and
sophistication. All joints are hand welded and
invisible. The tabletop is connected to the base
with circular stanchions further adding to the
table’s lightness. In teak, the table also works
well outdoors (covered terrace recommended).
CB-35
Circular
Dining Table
CB-36
Circular
Coffee Table
CB-361
Circular
Coffee Table
(large)
ø 135cm
H 72cm
Top 3cm
ø 80cm
H 45cm
Top 2cm
ø 90cm
H 35cm
Top 2cm
ø 53 1/8”
H 28 3/8”
Top 1 1/4”
ø 31 1/2”
H 17 3/4”
Top 3/4”
ø 35 1/2”
H 13 3/4”
Top 3/4”
Solid Teak, Walnut or Ash.
Solid oxidized brass three-leg base.
Design 2002