Chokes and Control Panels Cho - MCM Oil Tools · 2019-05-07 · Chokes and Control Panels CAMERON®...
Transcript of Chokes and Control Panels Cho - MCM Oil Tools · 2019-05-07 · Chokes and Control Panels CAMERON®...
-
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
Hydraulic Drilling ChokeSWACO® STYLE
Hydraulic Drilling ChokeCAMERON® STYLE
Control Panel
Manual ChokeCAMERON® STYLE ‘H2’ TYPE
Chokes and Control Panels
-
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
• Needle and Seat design provide for fullyadjustable flow
• Adjustable models easily adaptable topositive configurations
• Needle and seat available in standard orsuper trim
• Interchangeable with Cameron® ‘H2’ stylechokes
• Thumbscrew secures Stern position at anysetting
• Ideal choke for precision control offlow rates
• Designed to provide positive seal
• Tungsten carbide wear sleevesextend choke’s serviceability life
• Eight-bolt design allows for internalinspection without seriousdowntime
• Rotary-style actuator allows forregulation of the opening from fullopen to full close
• Available from 5,000 - 15,000 PSI
• Flange sizes from 31/8” to 41/16
• Standard orifice size 13/4”
• Stem and seat can be repairedwithout removal from service
• All Cameron® style hydraulic drillingchokes are suited for H2S service
MCM Control Console
MCM OIL TOOLS offers high quality, well-designed and constructed control panels
The MCM OIL TOOLS control panel can be equipped with a number of features, including dual choke operation
The control panel features gauge displays for choke position as well as rig air, hydraulic, standpipe, casing and choke manifold pressures
The control panel is designed to meet customer’s individual requirements
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Rev 0 4.5.19
Rev 0 4.5.19 Rev 0 4.5.19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
-
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
• Needle and Seat design provide for fullyadjustable flow
• Adjustable models easily adaptable topositive configurations
• Needle and seat available in standard orsuper trim
• Interchangeable with Cameron® ‘H2’ stylechokes
• Thumbscrew secures Stern position at anysetting
• Ideal choke for precision control offlow rates
• Designed to provide positive seal
• Tungsten carbide wear sleevesextend choke’s serviceability life
• Eight-bolt design allows for internalinspection without seriousdowntime
• Rotary-style actuator allows forregulation of the opening from fullopen to full close
• Available from 5,000 - 15,000 PSI
• Flange sizes from 31/8” to 41/16
• Standard orifice size 13/4”
• Stem and seat can be repairedwithout removal from service
• All Cameron® style hydraulic drillingchokes are suited for H2S service
MCM Control Console
MCM OIL TOOLS offers high quality, well-designed and constructed control panels
The MCM OIL TOOLS control panel can be equipped with a number of features, including dual choke operation
The control panel features gauge displays for choke position as well as rig air, hydraulic, standpipe, casing and choke manifold pressures
The control panel is designed to meet customer’s individual requirements
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Rev 0 4.5.19
Rev 0 4.5.19 Rev 0 4.5.19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
-
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
QUALITY • DELIVERY • PRICE
Cameron® Type “H & HM” Back Pressure Valve
•The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
•Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
•Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
•The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
•Material options of 4130, 17-4 and Inconel.
*We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Q U A L I T Y • D E L I V E R Y • P R I C E
Cameron® Type “H & HM” Back Pressure Valve
• The Cameron type “H” back pressure valve safely seals tubing pressure to20,000 psi. BPV are used during the inflation of Christmas Trees, BOP removal
and to prevent backflow of fluid into tubing.
• Back pressure valves reduce downtime and operating cost by allowing forrepairs without killing the well.
• Sizes available from 1-1/4” to 6-5/15” for BPV + TWC
• The “H” Two-Way style Check Valve can be installed in the tubing hanger fortesting up to 15,000 psi.
• Material options of 4130, 17-4 and Inconel.
* We also provide installation, removal tools and test plugs*
Rev 0 4/3/19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y • D E L I V E R Y • P R I C E Q U A L I T Y • D E L I V E R Y • P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON® STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON® STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automatedpackages available
with Control Panels and
Instrumentation
Internal choke parts are
completely interchangeable
with O.E.M.
SWACO®
CHECK VALVECAMERON® STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19Rev 0 4.5.19
GATEVALVES
Q U A L I T Y •D E L I V E R Y•P R I C EQ U A L I T Y •D E L I V E R Y•P R I C E
Pressures up to 15,000 PSI forVarious Sizes
Chokes and Control Panels
CAMERON®STYLE ‘FC’ & ' FLS'TYPE
CONTROL PANEL
MANUAL CHOKECAMERON®STYLE ‘H2’
TYPE
HYDRAULIC DRILLING CHOKE CAMERON® STYLE
Meets or Exceeds API 6A Standards &
NACE MR-01-75
Mounted and fully automated
packages available
with Control Panels and
Instrumentation
Internal choke parts are completely
interchangeable with O.E.M.
SWACO®
CHECK VALVECAMERON®STYLE ‘R’
TYPE
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
10422 W. Gulf Bank Rd. • Houston, Texas 77040 Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
'MS' STYLE CHECK VALVECAMERON® STYLE
Rev 0 4.5.19 Rev 0 4.5.19
Cameron® Style ‘FC’ Gate Valve
• Manifolds• Gate Valves• Check Valves• Chokes
GATE VALVES
CAMERON® STYLE ‘FC’ & 'FLS' TYPE
SWACO® CHOKE
MANUAL CHOKECAMERON® STYLE ‘H2’ TYPE
HYDRAULIC DRILLING CHOKECAMERON® STYLE
CONTROL PANELCHECK VALVE
CAMERON® STYLE ‘R’ TYPE
Q U A L I T Y • D E L I V E R Y • P R I C E
10422 W. Gulf Bank Rd. • Houston, Texas 77040Tel: 713-541-1212 • Fax: 713-541-4664
E-Mail: [email protected] • Website: www.mcmoiltools.comCameron® and SWACO® are registered trademarks of companies not affiliated with MCM in any way
'MS' STYLE CHECK VALVECAMERON® STYLE
Back Pressure ValveCameron® Style “H & HM”
Type
CAMERON® Type U Packers &
Top Seals
Rev 0 4/3/2019
HYDRAULIC DRILLING CHOKECAMERON® STYLE