8/13/2019 chlorinatedpolyethylenedatasheet-110309071049-phpapp01

1/2

WESTMOONINT (HK) CORPORATION LIMITED

Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA

Tel: 86-028-61311272 Fax: 86-028-61311273

Web: www.westmoonint.com E-mail: info@westmoonint.com

1 Chlorinated Polyethylene Data Sheet

General Introduction

Chemical Definition: Chlorinated-Polyethylene

Abbreviation: CPE

Formula:-CH2-CHCl-n

Chlorinated-Polyethylene Properties

Chlorinated-Polyethylene is odorless nontoxic and white or pale yellow powder with

excellent resistance to weathering or age ozone chemicals, and good resistance to oil

or flame.

Chlorinated-Polyethylene offers excellent flexibility and resistance to ignition,

chemicals, heat, low temperatures and weathering at a low overall system cost.

Chlorinated-Polyethylene can be used as a base polymer or as an additive to polyvinyl

chloride (PVC), acrylonitrile butadiene styrene (ABS), styrene acrylonitrile (SAN),

high density polyethylene (HDPE), and polypropylene (PP) for a wide range ofapplications spanning both thermoplastic and thermoset chemistries.

Chlorinated-Polyethylene Specification

Index Unit Type

CPE135 CM135 CPE230 CM140

Chlorine Content % 33-37 33-37 28-32 38-42

Melting Heat J/g, 2.0 2.0 5.0 2.0

Volatile Content %, 0.4 0.4 0.4 0.4

Screenings (0.9mm Sieve) 2.0 2.0

Colored impurity

Particle

100g 60 60

Shore Hardness A 65 60 70 70

Tensile Strength MPa 6.0 6.0 6.0 6.0

Mooney viscosity (1+4),121) MV 80 110

Important Announcements:The any depictions in this paper can not be regarded as the abduction of

infringing patents. Seller has no any responsibilities for the statement clingers about products, the

infringed pledges and any losses on any occasions. The data and the results about products come from

the controlled or lab works, and buyers must validate those data and results about products according

8/13/2019 chlorinatedpolyethylenedatasheet-110309071049-phpapp01

2/2

WESTMOONINT (HK) CORPORATION LIMITED

Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA

Tel: 86-028-61311272 Fax: 86-028-61311273

Web: www.westmoonint.com E-mail: info@westmoonint.com

2to their own applying conditions.

Chlorinated-Polyethylene Application

Chlorinated-Polyethylene application in Automotive Hose and TubeChlorinated-Polyethylene are used in automotive "rubber" applications including

power steering, engine oil cooler, and transmission oil cooler hoses; fuel hose covers;

vacuum and emission tubing; and in automotive air management system "air ducts".

Chlorinated-Polyethylene is designed to accept higher levels of filler and oil than

traditional CM grades, while maintaining excellent physical properties.

Chlorinated-Polyethylene application in Building and Construction (VinylImpact Modification)

Chlorinated-Polyethylene resins are high performing, cost effective, impact modifiersin rigid PVC applications, especially window profiles, siding and pipe.

Chlorinated-Polyethylene resins offer excellent low temperature properties, high filler

level acceptance, resistance to weathering and excellent compatibility with a broad

range of formulation ingredients.

Chlorinated-Polyethylene resins are also used as modifiers for ABS, SAN, HDPE, and

PP, adding both impact strength and ignition resistance.

Chlorinated-Polyethylene application in Other ApplicationsIndustrial Hoses

Miscellaneous Rubber Goods

Ignition Resistant ABS Compounds

Flexible Thermoplastic Sheeting

Packaging

Chlorinated-Polyethylene Rubber is stored in polyethylene woven bags, and each of

them can contain 25 KG in net weight.

Storage

Chlorinated-Polyethylene Rubber should be stored in dry and ventilated warehouse.

Chlorinated-Polyethylene Rubber must not allow being stored outdoor, keeping awayfrom sunshine and humidity during its storage or transportation and being transported

in clean covered truck.

Issued by WESTMOONINT (HK) CORPORATION LIMITED in 2010