CHIYODA WELDING PRODUCTS - yewcheong.com.sg 1 - chiyoda welding product.pdf · DISTRIBUTED BY:...
Transcript of CHIYODA WELDING PRODUCTS - yewcheong.com.sg 1 - chiyoda welding product.pdf · DISTRIBUTED BY:...
DISTRIBUTED BY:
Combination Welding and Cutting TorchesVictory Standard Combination Torches, operate on medium or low pressured acetylene gas,are designed for economy safety and convenience.The below numerical values are all approximations.
Model
13
15
Set with
3 cutting tips
7 welding tips & spanner
3 cutting tips
7 welding tips& spanner
Tip No.
1, 2, & 3
200, 225, 250, 315, 400, 450 & 500
1, 2, & 3
250, 315, 400, 500,630, 800 & 1000
Range(mm)
3.0 - 20.0
1.0 - 5.0
5.0 - 50.0
2.0 - 10.0
Oxy.Pressure(kg/cm²)
2.5
3.0
4.0
4.0
Ace.Pressure(kg/cm²)
0.3
0.3
0.4
0.4
Strong-25 Heavy Duty Hand Cutting TorchStrong-25 Heavy Duty Hand Cutting Torch (Order No. 108020001) covering a range of metal thickness up to 250mm (10”).The below numerical values are all approximations.
Size No.
00012345678
Orifice(Ø mm)
0.81.01.21.41.61.92.32.73.03.4
Thicknessto be cut (mm)
3-55-1010-2015-3025-5040-8060-150120-200150-250200-300
Oxygen
2.02.03.03.03.04.04.04.00.50.5
Fuel Gas
0.20.20.30.30.30.40.40.40.50.5
Gas Pressure (kg/cm²)
Strong-8 Medium Duty Hand Cutting TorchStrong-8 Medium duty hand cutting torch (Order No. 108020002) covering a range of metalthickness up to 80mm (3”).The below numerical values are all approximations.
Size No.
123456
Orifice(Ø mm)
0.70.91.11.31.61.9
Thicknessto be cut (mm)
3~75~1510~2015~3025~5040~80
Oxygen
2.02.02.52.53.03.0
Fuel Gas
0.20.20.250.250.30.3
Gas Pressure (kg/cm²)
Order No.
108020003
108020004
1.27
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
Save PointFlash Arrestor “Save Point” is an indispensable equipment for gas welding & cutting operation as a high-level safety device which has 4 (four) functions of preventing a reverse flow, PreventingBackfire or Flashback completely, One-Touch Restoration after flashback, and gas supply.
Applicable Gas
Max. Working PressureFlow capacity
Connecting Dia.LengthInlet connectionOutlet connectionWeightOrder No.
Acetylene, Propane etc.(except, Hydrogen)1.3 kgf/cm²2Nm³/h(under P2 0.5kgf/cm²)
M 16 x 1.5L FemaleM 16 x 1.5L Male205g1081010002
Oxygen
10 kgf/cm²30Nm³/h(under P2 8kgf/cm²)
M 16 x 1.5L FemaleM 16 x 1.5L Male210g1081010030
8A76mm
Spec. Type SA - 2 SQ - 30
Extinguishing filter
Eccentric-cam(One-touch Resetter)
InletOutlet
Check valveLock
Station Flashback ArrestorsModel DSS-5 Gas Flow Capacity : 5,000 l/hourGas Inlet Pressure : 0.2 to 1.0 kg/cm²
UseSupply clean water from the Water Inlet to the level line of Water Level Window. If water exceedsin , open the Drain Valve and adjust it to the level line.
FunctionGas flows from the Inlet to the Outlet through the water in the Water/ Gas Separating Chamber.When back fire occurs, exploded gas breaks the Rupture Disc Plate and blows from the UpperWater Chamber. At the same time, the Counter-flow Preventer will be closed and cut flow of gas.
Caution• Pressure of gas in use is 0.2 to 1.0 kg/cm² at the Inlet.• Keep water in the Water/Gas Separating Chamber and Upper Water Chamber, and inspect water level once a day before using of gas.• When back fire occurs, close the Gas Inlet Valve as early as possible.
Model DSS-7 Gas Flow Capacity : 7,000 l/hourGas Inlet Pressure : 0.2 to 1.0 kg/cm²
UseSame as above.
FunctionWhen back fire occurs, exploded gas breaks Rupture Disc Plate and at the same time, theFlashback Cut-off Valve will be closed automatically. In case of counter flow of gas, the Counter-flow Preventer will be closed by pressure of gas.
Caution• Pressure of gas in use is 0.2 to 1.0 kg/cm² at the Inlet.• Keep water in the Water/Gas Separating Chamber and Upper Water Chamber, and inspect water level once a day before using of gas.* The below numerical values are all approximations.
Type
Flow Capacity
Inlet
5m³/h
PT3/8 Female
* The below numerical values are all approximations.
Outlet
Height
Weight
Order No.
PF3/8 Female
500mm
8kg
1081010005
DSS-5
Type
Flow Capacity
Inlet
7m³/h
PT1/2 Female
Outlet
Height
Weight
Order No.
PF1/2 Female
600mm
11kg
1081010007
DSS-7
1.28
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
Type
Flow Capacity
Inlet
20m³/h
1B5KF
* The below numerical values are all approximations.
Outlet
Height
Weight
Order No.
1B5KF
850mm
30kg
1081010010
DSS-10
Model DSS- 10 Gas Flow capacity : 20,000 l/hourGas Inlet Pressure : 0.2 to 1.0 kg/cm²
UseSupply clean water from the Water Inlet to the level line of Water Level Window and then, closethe Ventilation Valve and the Water Supply Valve and supply again full of water to the Sub WaterChamber. When the water inside of chamber less than the level line, open the both valves to increase water. Function & Caution: Same as DSS-7
Model DSS -40, -60 & -100 Gas Flow capacity : 40, 60 and 100m³/hour, respectivelyGas Inlet Pressure : 0.2 to 1.0 kg/cm²
Use, Function & CautionSame as DSS-10.
Type
Flow Capacity
Inlet
Outlet
Height
Weight
Order No.
DSS-40
40m³/h
1½B5KF
1,300mm
105kg
1081010040
DSS-60
60m³/h
2B5KF
1,400mm
110kg
1081010060
* The below numerical values are all approximations.
DSS-100
100m³/h
2½B5KF
1,700mm
216kg
1081010100
1.29
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
New Aster Regulator
Modern Compact single stage regulators equipped with/without steel made Gauge Protectors,which protect regulator from bumps, knocks and broken gauges. The regulators provide efficientand dependable control of gas, these flow controls deliver a sufficient flow of gas for most welding and cutting operations.
Argon Regulators - AH - 1CD
When the Argon pressure in the cylinder reduces to 10kgf/cm² or so, a lamp and buzzer of the alarm can give a warning to you. This regulator is compensated (well-balanced as atmosphere)to provide constant delivery and flow regardless of decaying inlet pressure. Metal gaskets areput at connecting positions of the pressure gauges and flow meter, furthermore Gas leakagefrom every connecting positions are protected by using metal touches.
Oxygen
Acetylene
ApplicationsPrimary Working PressureSecondary Working PressureFlow CapacityPressure Gauge Inlet OutletWeightOrder No: Without protector With protector
Oxygen150kg/cm² (max)
2 - 15kg/cm²35Nm³/hr. (at 5kg/cm²)
0 - 250kg/cm²0 - 25kg/cm²
1180g10805200021080520011
Acetylene15.5kg/cm² (max)0.2 - 1.0kg/cm²
2Nm³/hr. (at 0.5kg/cm²)0 - 25kg/cm²0 - 2kg/cm²
1080g10805200011080520012
Gas Application
Primary Pressure
Primary Pressure
Alarm Pressure
Flow meter
Order No.
Argon
max. 165 kg
1-6 kg/cm²
about 10 kgf/cm²
2-25 NL/min.
1080521002
Primary Gauge
Secondary Gauge
Inlet Connection
Hose nipple
Battery Capacity
0-250 kgf/cm²
0-10 kgf/cm²
JIS/BS/CGA
Ø 6mm
6V
Co2 Regulators - EH - 2NCD
When the CO2 pressure in the cylinder reduces to 10 kgf/cm² or so, a lamp and buzzer of thealarm can give warning to you. Being built-in the regulator, a cartridge-heater has an excellentheat-efficiency and durability comparing with other equivalents. You can easily note the variationof temperature by discolouration of the thermo-sticker.
Gas Application
Primary Pressure
Primary Pressure
Alarm Pressure
Flow meter
Primary Gauge
Secondary Gauge
Inlet Connection
Order No.
CO2
Cylinder Pressure
1-3 kg/cm²
about 10 kgf/cm²
2-25 NL/min.
0-150 kgf/cm²
0-6 kgf/cm²
JIS/BS/CGA
1080521001
Hose Nipple
Electric
Heater Capacity
Set Temperature
Length of Electric Cord
Thermo-Sticker
Weight
Battery capacity
Ø6mm
AC100V/200/220V
190W
60ºC
2M
50ºC
3.2KG
6V
1.30
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
TypesApplicable gasesPrimary P.(kgf/cm²)Delivery P.(kgf/cm²)Max. Flow Rate (N l/min)Flowmeter (N l/min)Order No.
AH series regulators are compensated (balance) to provide constant delivery pressure and flow regardless of decaying inlet pressure.This us the same performance characteristic found in more costly two-stage regulator.
AHN-1
1 ~ 6100
2 ~ 251080510021
AHN-2
1.550
2 ~ 251080510022
AHN-3
1 ~ 6100
-1080510023
Ar N2 O2 He etc.
165
* AH-2 Delivery pressure is fixed.
TypesApplicable gasesPrimary P.(kgf/cm²)Delivery P.(kgf/cm²)Max. Flow Rate (N l/min)Flowmeter (N l/min)Order No.
BH series two-stage regulators provide a constant no-fluctuating gas flow from start to finish of your operations. Once the workingpressure is set, no further attention to the regulator is necessary. These precision devices save time and gas.
BHN-1
1 ~ 3100
2 ~ 251080510031
BHN-2
1.550
2 ~ 251080510032
BHN-3
1 ~ 3100
-1080510033
Ar N2 O2 He etc.
165
* BHN-2 Delivery pressure is fixed.
GH series single stage regulators are designed for light to medium applications. Uses include welding and cutting, insert gas welding,in laboratories and with flowmeter.
* GHN-2 Secondary pressure is fixed.
TypesApplicable gasesPrimary P.(kgf/cm²)Delivery P.(kgf/cm²)Max. Flow Rate (N l/min)Flowmeter (N l/min)Order No.
CH series pipeline regulators are designed for outlet stations, suitable for optimum control and delivery pressure far from central gasmanifolds.
CHN-1
2 ~ 251080510041
CHN-2
302 ~ 25
1080510042
CHN-3
-1080510043
Ar N2 O2 CO2 C2 H2 He etc.
10
* CHN-4 Available for panel setting.
1 ~ 3
* Stainless-steel made Diaphragm is used for Helium & Hydrogen Gases.* Please make sure your using gas name in your ordering.
AHN-1Order No. 1080510021
AHN-2Order No. 1080510022
AHN-3Order No. 1080510023
BHN-1Order No. 1080510031
BHN-2Order No. 1080510032
BHN-3Order No. 1080510033
GHN-1Order No. 1080510010
GHN-2Order No. 1080510012
for ArgonOrder No. 1050810013
for CO2
GHN-3Order No. 1080510014
CHN-1Order No. 1080510041
CHN-2Order No. 1080510042
CHN-3Order No. 1080510043
TypesApplicable gasesPrimary P.(kgf/cm²)Delivery P.(kgf/cm²)Max. Flow Rate (N l/min)Flowmeter (N l/min)Order No.
GHN-1
1 ~ 6100
2 ~ 251080510010
GHN-2
1.550
2 ~ 251080510012
GHN-3
1 ~ 6100
-1080510014
Ar N2 O2 He etc.
165
1.31
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
Electrically Heated Regulators
Function: High flows of CO2 lead to the formation of dry ice crystals inside regulator orifices.These crystals reduce or stop flows completely.EH series electrically heated, thermostatically controlled, regulator prevent internal dry ice accumulations and freeze-up.Features:(1) Small but a high thermal efficiency.(2) Attached thermal seal shows the temperature (50ºC) of heater.(3) Built-in over heat protector (EH50 and EH100)
Types
Applicable Gases
Primary Pressure (kgf/cm²)
Delivery Pressure (kgf/cm²)
Flow Rate (N l/min)
Primary Gauge (kgf/cm²)
Delivery Gauge (kgf/cm²)
Flowmeter (N l/min)
Weight (kg)
Order No.
EH-1N
No Gauge
1.8
1080510011
EH-2N
0 ~ 250
2.06
1080510015
EH-3N
No Gauge
1.51
1080510016
EH-4N
0 ~ 250
1.88
1080510017
CO2 (Non-syphon cylinder)
Max.165
1 ~ 3
Max.25
1 ~ 6
2 ~ 25 No Flowmeter
Input : AC110/220V, Heater capacity : 190W, Cord length : 2m
Input : AC110/220V, Heater capacity : EH50 380W EH100 570WCord length : 2m Available for 5kg/cm² delivery pressure.
Types
Applicable Gases
Primary Pressure (kgf/cm²)
Delivery Pressure (kgf/cm²)
Flow Rate (N l/min)
Primary Gauge (kgf/cm²)
Delivery Gauge (kgf/cm²)
Flowmeter (N l/min)
Weight (kg)
Order No.
EH50-1
3 (Fixed)
0 ~ 250
No Gauge
5 ~ 50
3.05
1080510501
EH50-3
No Gauge
0 ~ 6
2.8
1080510503
EH50-4
0 ~ 250
0 ~ 6
2.85
1080510504
EH100-1
3 (Fixed)
0 ~ 250
No Gauge
10 ~ 100
3.1
1080511001
CO2 (Non-syphon cylinder)
Max.165
No Flowmeter
1 ~ 3
Max.70
EH-1N
EH-2N
EH-3N
EH-4N
EH50-1
EH50-3
EH50-4
Types
Applicable Gases
Primary Pressure (kgf/cm²)
Delivery Pressure (kgf/cm²)
Flow Rate (N l/min)
Primary Gauge (kgf/cm²)
Delivery Gauge (kgf/cm²)
Flowmeter (N l/min)
Weight (kg)
Order No.
CO2 (Non-syphon cylinder)
Max.165
EH100-3
1~ 3
No Gauge
0 ~ 6
2.8
1080511003
No Flowmeter
EH100-4
1~ 3
0 ~ 250
0 ~ 6
2.85
1080511004
Max.120
1.32
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
High Working Pressure Cylinder Regulators
The below numerical values are all approximations.
KR-30H
KR-80H
KR-120H
KR-170H
TKR-50K
TKR-100K
50
150
200
250
50
150
250
250
250
250
250
250
165
165
165
165
165
165
30
80
120
150
30
100
50
100
80
80
75
170
1.7
2.3
2.5
3.3
2.0
2.4
1080560030
1080560080
1080560120
1080560170
1080560050
1080560100
ModelsLP HP
Gauges (Kg/cm²) Maximum (Kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)
Weight(Kg)
Order No
High Incoming Pressure Regulators for distribution lines
TKR-140
TKR-200
TKR-500
TKR-1000
25
25
25
15
350
350
350
350
220
220
220
220
15
15
15
10
140
200
500
1000
3.5
5.2
9.0
16.0
1080560140
1080560200
1080560500
1080561000
ModelsLP HP
Gauges (Kg/cm²) Maximum (Kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)
Weight(Kg)
Order No
Large Flow Regulators for central manifold or distribution lines
GS-140
GS-200
GS-140L
GS-200L
25
25
15
15
250
250
50
50
165
165
30
30
15
15
10
10
140
200
100
230
3.5
5.2
3.5
5.2
1080570140
1080570200
1080570141
1080570201
ModelsLP HP
Gauges (Kg/cm²) Maximum (Kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)
Weight(Kg)
Order No
Large Flow Regulators for distribution lines
GS-500
GS-1000
25
15
250
250
165
165
15
10
500
1000
9.0
16.0
1080570500
1080571000
ModelsLP HP
Gauges (Kg/cm²) Maximum (Kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)
Weight(Kg)
Order No
1.33
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:1.34
Outlet station RegulatorsFor Oxygen Nitrogen, Argon, Hydrogen, Helium, Acetylene, etc.
The below numerical values are all approximations.Pipeline Regulators
108058101010805810251080581030108058106010805811201080581180
Maximum (Kg/cm²)
Order No
Large Flow Regulators for Acetylene manifolds or distribution lines
1080582014
1080582020
Order No
Large Flow Low Working Pressure Regulators
1085830400
1085830401
1085830200
1085830003
10253060120180
GL-10GL-25GL-30GL-60GL-120GL-180
2215252525
------
2210251540
11815815
0.81.90.80.91.91.9
ModelsLP HP
Gauges (Kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)
Weight(Kg)
GS-14
GS-20
3
3
30
30
15.5
15.5
1.3
1.3
12
20
3.5
5.2
ModelsLP HP
Gauges (Kg/cm²) Maximum (Kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)
Weight(Kg)
1.0
5.0
10.0
30.0
Maximum (Kg/cm²)
RF-400
RF400P
MGS-200
RSC-3
0.5
3.0
-
-
2
20
-
-
0.2
2.0
0.4
10.0
150
550
300
2300
93
90
26.2
31
ModelsLP HP
Gauges (Kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)
Weight(Kg)Order No
Large Flow Regulators for large manifold or gas type distribution lines
GS-1000P
GS-2000P
GS-3000P
25
25
25
250
250
250
165
165
165
15
15
15
1000
1600
2300
1085901000
1085902000
1085903000
ModelsLP HP
Gauges (Kg/cm²) Maximum (kg/cm²)
IncomingPressure
DeliveryPressure
FlowCapacity
(Nm³ / Hour)Order No
18.7
34.6
45.0
Weight(Kg)
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
High Purity Gas RegulatorsChiyoda Seiki’s “Excellent” series high purity gas regulators are carefully constructed for using properly in electronic, aerospace and ultra-pure gas system fields. Ex-mk II Series are consistedin three grades, such as G1, G2 and G3. Each grade product is constructed under carefulconsideration about the construction. Applications: Analysis Carrier Gases, Semiconductor Manufacturing Gases, Poisonous & corrosive gases.
Helium leak rateConnectionsCleaningAssemblingMaterialPackaging
1x10-8 Acc/sec.1/4VCR or Tube
1x10-7 Acc/sec.Screw in
Compressed He 12hoursScrew in
Two-steps ultrasonically cleaningIn a Class 1000 Clean roomStainless steel 316Packed in a polyethylene film under N2
Inlet PressureDelivery PressureNormal Flow RateMaximum Flow RateFlow CoefficientTemperature RangeDew PointHelium Leak RateWeightOrder No.
210kgf/cm²10kgf/cm²20NL/min50NL/min0.05max-10~60ºC-70ºC1x10-8 Acc/sec.1.2kg1080550020
210kgf/cm²10kgf/cm²100NL/min150NL/min0.05max-10~60ºC-70ºC1x10-8 Acc/sec.1.3kg1080550100
210kgf/cm²6kgf/cm²20NL/min30NL/min0.05max-10~60ºC-70ºC1x10-8 Acc/sec.1.9kg1080550300
210kgf/cm²6kgf/cm²100NL/min150/min0.05max-10~60ºC-70ºC1x10-8 Acc/sec.2.0kg1080550400
Grade G1 G2 G3
Models EX-20mk II EX-100mk II EX-300mk II EX-400mk II
Inlet PressureDelivery PressureNormal Flow RateMaximum Flow RateFlow CoefficientTemperatureRangeDew PointHelium Leak RateWeightOrder No.
30kgf/cm²10kgf/cm²20NL/min50NL/min0.17-10~60ºC-70ºC1x10-8
Acc/sec.0.9kg1080550500
30kgf/cm²10kgf/cm²100NL/min150NL/min0.17-10~60ºC-70ºC1x10-8
Acc/sec.1.0kg1080550600
20kgf/cm²10kgf/cm²300NL/min450NL/min0.60-10~60ºC-70ºC1x10-7
Acc/sec.3.5kg1080550700
10kgf/cm²8kgf/cm²1000NL/min2000NL/min1.75-10~60ºC-70ºC1x10-6
Acc/sec.6.0kg1080551000
10kgf/cm²8kgf/cm²4000NL/min5000NL/min3.58-10~60ºC-70ºC1x10-6
Acc/sec.16kg1080554000
Models EX-500mk II EX-600mk II EX-1000mk II EX-4000mk IIEX-700mk II
EX-20mk II G1
EX-100mk II G3
EX-300mk II G2
EX-400mk II G2
EX-500mk II G1EX-600mk II G2
EX-1000mk II EX-4000mk II
EX-700mk II
EX-M-100
EX-M-500
Single Stage Stainless Steel RegulatorsEx-M (Excellent Mega) Series single stage stainless steel regulators are designed for InstrumentAnalysis or Semiconductor Manufacturers where high purity must be maintained. This series regulators are more accuracy than our EX-mk II series and have been founded to have a leakagerate of less than 1 x 10-10 Acc/sec. of helium.
ModelsInlet PressureDelivery PressureNormal Flow RateMaximum Flow RateFlow CoefficientTemperature RangeDew PointHelium Leak RateConnectionsFinish
Order No.
210kgf/cm²10kgf/cm²20NL/min50NL/min0.05-10~60ºC-74ºC1x10-10Acc/sec.1/4VCR or Tube
EX-M-20 EX-M-100 EX-M-500 EX-M-600210kgf/cm²10kgf/cm²100NL/min150NL/min0.05-10~60ºC-74ºC1x10-10Acc/sec.1/4VCR or Tube
30kgf/cm²10kgf/cm²20NL/min50NL/min0.17-10~60ºC-74ºC1x10-10Acc/sec.1/4VCR or Tube
30kgf/cm²10kgf/cm²100NL/min150NL/min0.17-10~60ºC-74ºC1x10-10 Acc/sec.1/4VCR or Tube
1080530020 1080530100 1080530500 1080530600
Electropolished Rmax. 0.7µm
* EX-M-700, EX-M-1000, EX-M-4000 regulators available for large flow.
1.35
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
“STRONG AUTO” Automatic Gas Cutting ToolThe VIC 7 “STRONG AUTO” is a unique automatic gas cutting machine, designed for allpurposes, easy operation, accuracy and efficiency. It’s suitable for small shops.
WeightPower SourceMotor Speed Control MethodCutting ThicknessCutting SpeedWheel DriveOrder No.
2.7Kgs.220V ACDC 12V, 7200rpm. Speed reducer:1/300Transistor Control5~50mmFriction drive1080900007
Power SourceCutting SpeedMax. Cutting ThicknessBevel CuttingDimensions (mm)WeightOrder No.
AC 100V or 200V100~1000mm/min5-100mm45º387(L) x 123(W) x 220(H)Body 7.1kgs, Rail 3.2kgs1080900003
Single-Hand Operated Cutting Machine (Bent Handle)The VIC-3 is a semi-automatic portable flame cutting machine, featuring compact and lightweight construction for well balanced one hand operation. The machine is applicable for straight line, bevelling and circle cutting with standard accessories.
Single-Hand Operated Cutting Machine (Straight Handle)The VIC-4 is used for the same applications of the above VIC-3. Straight handle type, compactand light weight construction for balance single-hand operation in straight line, bevelling circleand free cutting. The simple rugged construction of VIC-4 makes for maintenance freemechanism and a longtime use.
Power SourceCutting SpeedMax. Cutting ThicknessCircle Cutting RangeDimensions (m/m)Weight (without rail)Order No.
AC 100V or 200V50-1000mm/min.5-100mm60-1200mm dia.460(L) x 120(W) x 240(H)9.8kgs1080900004
Automatic Portable Flame Cutting MachineThe VIC-12 has installed the Pi-shutter (Quick Action Gas Saving Valve) with the following merits:• Saves more than 15% of Oxygen and Fuel Gas.• Once adjust flame, never at all.• A single action is enough for releasing and stopping of Oxygen and Fuel Gas Valves.
Dimensions (mm)Total WeightMotorSpeed ControlDriving SpeedCutting CapacityRail Dimensions (mm)Order No.
300 (L) x 135 (W) x 180 (H)9.3kgsD.C. Motor, 7,500 r.p.m.TRIAC50~1000mm/min3~60mm160 (W) x 1800 (L), common to VIC-101080900012
1.36
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
Gas Pipe Cutting MachineThe VIC-65 (Chain Driven Portable Pipe Cutting Machine - Manual Operation) travels manuallyaround the pipe with 4 wheels by a chain. The machine is constructed for maintenance free mechanism, easy operation and a very light weight (9 kgs).
Features:• Smooth, dependable chain drive.• Simplified operational control.• Adjustable blowpipe angle for edge-cutting.• Handy and lightweight (8.5 kgs).
Pipe Dia.Cutting ThicknessEdge ShapeCutting TipOrder No.
100 ~ 600mm by standard chain of 2400mm Available extra chainUp to 50mmI or V cutting(V Bevel up to 45º) A3800 (ACET.), P3500 (LPG)1080900065
Capacities:
Automatic Gas Pipe Cutting MachineThe VIC-66 is a portable auto pipe cutting machine, designed for labor saving and rationalizationas well as to include all the best features of the VIC-65 which has a fine reputation.
Cutting ThicknessCutting SpeedEffective Pipe DiameterBevel AngleMotorPower SourceWeight Cutting TipOrder No.
5-50mm100~700/min.150~600mm dia.Up to 45º10000 r.p.m.AC 110V: AC 220V14 Kgs.A3800 for ACET. P3500 for LPG1080900066
Pipe Hole Cutting MachineThe VIC-33 has been developed especially for making round holes on curve surfaces such as ship hulls-pressure vessels, branch holes in pipes. Moreover, the machine is able to use for circlecutting on flat plate, when the stroke length at zero.
Gross WeightHeightWidthDepthCapacities Effective Cutting Diameter Effective Vertical Stroke Max. Circle Cutting Speed Minimum Diameter of Pipe To Be Cut Cutting Thickness Control Method Motor Order No.
30kgs1000 mm1200 mm600 mm
80-500 mm0-160 mm100-800mm/min100mm6-100mmSCR (Ward-leonard)DC shunt motor, 15W 110/220V, 6000rpm1080900033
* Bevel cutting is also available by using an optional “Bel Cutting Attachment”.
1.37
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:1.38
Portable Eye TracerOur compact eye tracers model: VIC-92PT is designed for repeat cutting and any different shape cutting in order to meet these demands with attractive price, high efficiency and accuracy in operation
Portable Shape-Cutting MachineThe VIC-22 is an automatic portable precision flame shape-cutting machine, featuring automatic magnet tracing of template. The compact unit contains a built-in variable speed driving mechanism and it is simple, yet rigid construction assures superb durability. The advance design provides ease of operation and highly accurate performance and it does not necessarily need skilled labor to operate the machine.
Portable Circle Cutting MachineThe VIC-32 is automatic portable precision flame circle cutting machine, featuring easy automatic circle cutting. The compact, light weight unit contains a built-in variable speed driving mechanism and rigid construction with high accuracy assures perfect roundness of cutting. The advanced design provides ease of operation and highly accurate performance even without skilled labor.
Eye TracerCutting AreaTracing AreaCutting ThicknessTracing SpeedKerf CompensationCutting TorchTracing AccuracyCutting TorchWeightPower SourceOrder No.
Line-centre Tracing System, Friction Drive (DC µ Motor Drive).600mm (width) x 600mm (length)600mm (width) x 600mm (length)5 - 60mm100 - 750mm/min.±1.5mm (total 3.0mm)
± 0.25mm deviation from edge of line on straight line2 torches with minimum distance of 75mm between torches35 kgsAC 100/200/220/240V - 50/60 Hz, 1 Phase108090092
VoltageSpeedsCutting ThicknessCutting RangeCircle cutting
Magnet Roller DiameterWeightOrder No.
AC 100 - 200 Volts 100 - 1000mm/ min3 - 100 mm
30 - 700 mm Ø 600 - 1,700 Ø(Standard) (Using attachment)10mm33 kgs1080900022
DimensionsTotal WeightThickness of Cutwith Standard BlowpipeCircle Cutting RangeDriving PowerCutting Speed per Minute
Order No.
750(L) x 630 (H) x 370 (W) mm25 kg150mm (4.69”)
30-600mm Ø (standard)DC 100V, 15W Shunt motor100 to 850mm/ min (S.C.R. control)(Variable with built-in SCR Speed control system)1080900032
CHIYODA WELDING PRODUCTS
DISTRIBUTED BY:
Portable Automatic Shape Steel Flame-CuttersCOSMO Jr. - Z portable automatic shape steel flame-cutters using oxy-propane or oxy-acetylene, enable cutting of large shape steels at storage sites and eliminate costlyinstallation. Since they are designed to flame-cut shape steel of any kind, COSMO Jr. -Zflame-cutters are widely used in the construction, bridge-building , and steel manufacturing fields.
Power Source
Motor
Machine Speed (mm)
Machine Dimensions w/out rails
Length x Width x Height (mm)
Machine Weight (kg)
Vertical Rail Length (mm)
Transverse Rail Length (mm)
Order No.
170 x 180 x 180
12.8
565
1200
1080900300
170 x 180 x 180
15.6
665
1500
1080900400
170 x 190 x 235
16.2
960
2300
1080900600
Specifications F-300 F-400 F-600
AC 220V. 1Ph. 50/60Hz.DC Shunt Geared Motor x 2
0-800 mm/min
Cutting Ranges
Web Size To Be Cut (mm)Flange Size To Be Cut (mm)Thick of material To Be Cut (mm)Using Fuel Gas
150~600100~300
150~900100~400
150~1700100~600
F-300 F-400 F-600Types
Depend upon the No. of tipPropane or Acetylene
A = Web size B = Flange Sizet = Thick of Material
Auto Spider-250Featuring very light weight body with quick action gas shut-off valve & magnet provide easycarrying & all position cutting.
Cutting CapacityCutting ThickVoltageWeightOrder No.
30-250mm Ø4.5-30mmAC 100V or 200V5.8kgs1080900250
Valves for Gas ManifoldCut-Off Valves Neck Valves Outlet Valves
KV-250-C
KV-250-F
KV-250-CIS
SV-30-CAIS
KV-250-A
KV-250-T
SV-30-AU
1/2 x 1/2
BO-1
BO-2
BA-1
BA-2
1.39
CHIYODA WELDING PRODUCTS