CHIPBOARD TECHNICAL DATA - Hanson Plywood
2
Chipboard Technical Data P1 Standard P1 is suitable for general building work, joinery. P2 Superfine P2 Grade is suitable for use in veneering, foiling, kitchen and melamine- facing applications. Kronospan Chipboard is ideal for use in a variety of different applications. KC/QUAL/DOC/0015 - 18/04/11 KRONOSPAN CHIPBOARD - GENERAL PROPERTIES: Thickness (sanded) Length & width Edge straightness tolerance Squareness tolerance Formaldehyde Class E1 Tolerance on mean density within a board Moisture Content PROPERTY Page 1 of 2 TEST METHOD UNIT SPECIFICATION (EN 312) EN 324-1 mm ± 0.3 EN 324-1 EN 324-2 EN 324-2 EN 120 EN 323 EN 322 mm mm/m mm/m mg/100g % % ± 5 1.5 2 ≤ 8 ± 10% 5 to 13 KRONOSPAN CHIPBOARD SIZES: Standard P1 12, 15, 18, 25mm Superfine P2 15, 18mm THICKNESS Size 2440 x 1220 2440 x 1220 Superfine P2 18mm 3050 x 1220
Transcript of CHIPBOARD TECHNICAL DATA - Hanson Plywood
Chipboard
Technical Data
P1
Standard P1 is suitable for
general building work, joinery.
P2
Superfine P2 Grade is suitable for use in
veneering, foiling, kitchen and melamine-
facing applications.
Kronospan Chipboard is ideal for use in a variety of different applications.
KC/QUAL/DOC/0015 - 18/04/11
KRONOSPAN CHIPBOARD - GENERAL PROPERTIES:
Thickness (sanded)
Length & width
Edge straightness tolerance
Squareness tolerance
Formaldehyde Class E1
Tolerance on mean density within a board
Moisture Content
PROPERTY
Page 1 of 2
TEST METHOD UNIT SPECIFICATION (EN 312)
EN 324-1 mm ± 0.3
EN 324-1
EN 324-2
EN 324-2
EN 120
EN 323
EN 322
mm
mm/m
mm/m
mg/100g
%
%
± 5
1.5
2
≤ 8
± 10%
5 to 13
KRONOSPAN CHIPBOARD SIZES:
Standard P1 12, 15, 18, 25mm
Superfine P2 15, 18mm
THICKNESS Size
2440 x 1220
2440 x 1220
Superfine P2 18mm 3050 x 1220
Chipboard
Technical Data KC/QUAL/DOC/0015 - 14/12/10
KRONOSPAN P2 SPECIFIC PROPERTIES:
Internal Bond
Surface Soundness
Bending Strength
MOE
PROPERTY
Page 2 of 2
KRONOSPAN P1 SPECIFIC PROPERTIES:
Internal Bond
Bending Strength
MOE
PROPERTY TEST METHOD UNIT EN SPECIFICATION KRONOSPAN VALUES
EN 319 N/mm² 0.24 0.35
EN 310
EN 310
N/mm²
N/mm²
11.5
N/A
11.5
2100
TEST METHOD UNIT EN SPECIFICATION KRONOSPAN VALUES
(EN 312) - 18MM (18MM)
EN 319 N/mm² 0.35 0.45
EN 311 N/mm² 0.8 0.8
EN 310 N/mm² 13 13
EN 310 N/mm² 1600 1800
Target Density EN 323 KG/M³ N/A 650
(EN 312) - 18MM (18MM)
