CHIP SYSTEMS IN ASSOCIATION WITH NIESBUD (THE NATIONAL

INSTITUTE FOR ENTREPRENEURSHIP AND SMALL BUSINESS DEVELOPMENT (UNDER MSDE))

Announces LED TV/ LCD TV CHIP LEVEL SERVICE TRAINING

Program Structure A. Name of the Program LED TV/ LCD TV CHIP LEVEL SERVICE

TRAINING

B. Program Dates Chennai-15.9.2017 to 17.9.2017 Trichy -22.9.2017 to 24.9.2017

C. Program Duration in hours/weeks/month

Time: Daily 7 Hr Total 21 Hrs 3 Days Full Day Program

D Fees Details Rs.8750 D. Eligibility Criteria for Participants

1. Educational Qualifications 2. Work Experience required, if any 3. Age Limit [Note: ITEC norms is 25-45 years] 4. Target Group [Level of participants and target ministries/departments etc. may be indicated]

8th to 12th, Any Dip, Any degree, Engineering & Interested People/ No need of work exp. Any age of ITEC norms Any Service Person | Self Employed Corporate | Engineers| NRI Returned |Students Job Seekers | Retired & Interested people

E. Assessment of Eligibility yes

F. Aim & Objective/s of the Program

The Program has been designed to enable participants,Existing Entrepreneurs, Prospective Entrepreneurs, working Professionals, Self employed and Students for the development of Business, Technology in Service field.

G. Learning Outcomes

Knowledge: Service Knowledge Skill: Technical Service Engineer & Entrepreneur

H. Assessment Criteria

During the Class time we Assess the Student’s Performance both Conceptually & Practically.

I. Program Content

Course Content is given below

LED TV/ LCD TV CHIP LEVEL SERVICE TRAINING

DAY 2

DAY 1 Introduction - What is LCD&LED TV? Types of LCD & LED TV What is the difference between them? How TV works? Explanations about various sections and parts in side & outside of the TV Power supply Board Main Board Inverter Board LED drive Board T-CON board Front Key section board

Student Practical: TV Assembling & Disassembling

Explanations of Block diagram and Working principle- LCD TV & LED TV Deference between LCD & LED screen

Student Practical: Various Boards and parts Assembling & Disassembling

Introduction

What is Electronics - Difference between Electrical &Electronics? AC & DC Voltage – Current Type of materials Conductor –Insulator-Semiconductors Explanations of Basic components of Electronics. Type of components List of components

Resistor: Explanations

Types of Resistors - Working function - Color Coding of Resistor How to find out Resistor value. Difference between normal & SMT

Capacitor: Explanation

Type of Capacitors - Working function How to find out Capacitor value Difference between normal & SMT Capacitor

Student Practical:

Checking Method & count the value for Normal & SMT Resistor Checking Method & Count the value for Normal & SMT Capacitor

Inductor Transformer: Explanations

Types of Transformers - Working function Difference between Inductor Transformer Normal & SMT

Student Practical:

Checking Method Inductor Transformer Normal & SMT

Diode: Explanations Type of Diode - Working function Difference between normal & SMT Diode

Transistor: Explanations.

Type of Transistors – Working function Difference between normal & SMT Transistor. FET: Explanations Type of FET – Working function Difference between normal & SMT. FET

Student Practical:

Checking Method for Normal & SMT DIODE Checking Method for Normal & SMT Transistor Checking Method for Normal & SMT FET

IC: Explanations.

Type of IC’s – Working function Difference between normal & SMT Student Practical: Checking Method for normal & SMT

DAY 2 EDP Topics:

1.Concept and Need of Entrepreneurship, 2.How to became Entrepreneur with Govt Handholding Support 3.Popular Govt. Schemes for startups and business development and Environment

Scanning Solder & De solder: Explanations

Student Practical: Solder & De solder of Normal &SMT various Components and Connector using by Normal solder Iron &Hot air gun.

Power Supply: Type of power supply Basic SMPS Power supply Advanced SMPS power supply Explanations of Block diagram and circuit diagram and Working principle of Basic SMPS Power supply

Step by step Power up

Stand By Power (Before power switch on) Run Power (after power switch on)

Student Practical:

O/P Voltage Checking and circuit tracing of different type of SMPS

Power supply. various components and Connector Solder & de-solder for

Rectifying power problem.

Explanations of Main Board Block diagram and Circuit diagram Working principle & Circuit Tracing of Main Board (OR) Logic Board

Tuner section Input- Device (AV,PC VGA ,USB , HDMI) ADC,DAC,IF section, Processor, Video Processor, Scaler3D TVD, LVDS TX,HDMI pin-out SPI Flash ROM,DDR 1,2,3 RAM,

This training program is designed for Existing Entrepreneurs, Prospective Entrepreneurs, working Professional, Self employed and Students for the development of Business, Technology in Service field.

e Certificates will be awarded by Niesbud.

It can be verified anytime at www.niesbudtraining.org

T_CON, IR Board, KEY-board, USB,EEPROM, CLK Generator,

Student Practical:

Circuit Tracing and Voltage checking every section in Main Board (OR) Logic Board

DAY 3 Explanations & Working principle & Connector Voltage and checking Method of LCD screen – LED screen

LVDS Connector Voltage checking and Troubleshooting checking boost signals on panel AVDD,VCOM,VGH

Student Practical:

LVDS Cable Resembling &Disassembling, LVDS connector replace and Screen replaces Explanations &working principle & Voltage checking of LCD & LED Backlight controller board.

Student Practical:

Voltage checking of LCD & LED Backlight controller board.

Replace the CCFL & LED back light.

Explanations of AUDIO circuit diagram & Voltage checking.

Student Practical: Voltage checking & circuit tracing. Find-out audio problem and replace the parts

Final Give Service Tips &Test Tips & OSD, Service mode Tips Test equipment & Readymade fault solving Part Distributors

Troubleshooting Tips

1. No Power? 2. No Display No Sound? 3. Power On but No Display (or) noise picture? 4. Power On but No Sound (or) noise sound? 5. PSU (Power Supply Unit) Failures 6. Inverter Board Failures 7. No Video 8. solving Panel related problems 9. White screen, Backlight, 10. Color Missing, Lines on Screen,

11. double picture

A combination of multiple, conventional as well as non-conventional training methodologies will be used to effectively enhance the learning experience. This will include the following: Tips Theory Classes More Practical Classes

This course has been designed keeping in mind the needs of the following category of professionals: Any Service Person

Self Employed

Corporate

Engineers

NRI Returned

Students

Job Seekers

Retired People

Interested people

Dates& Venue:

Program Date : Chennai-15.9.2017 to 17.9.2017 Trichy -22.9.2017 to 24.9.2017 Venue: CHIP SYSTEMS Address: Old No. 107, Lake view road, west mambalam, Chennai- 600033, Website: www.chipsystems.in E-mail:Customercare@chipsystems.in Duration : 3 Days Training Program (Per day 7 Hr, total 21 Hrs) class Timing : 10 am to 05 pm PLACE : TRICHY & CHENNAI Investment:

The investment for the program is Rs.8750 per participant.

Contact: Mr.Karthik Course Coordinator

Chip systems Phone: 98410 87444 E-mail: admin@chipsystems.in

The National Institute of Entrepreneurship and Small Business Development (NIESBUD)

[An autonomous institution under the Ministry of Skill Development &

Entrepreneurship, Govt. of India] A-23, Sector-62, Noida, UP – 201309 | Web: www.niesbud.nic.in

REGISTRATION FORM Program Name: 3 Days Entrepreneurship Development Program On LED TV/ LCD TV CHIP LEVEL SERVICE

TRAINING on Chennai-15.9.2017-17.9.2017, Trichy -22.9.2017-24.9.2017,Daily 7 Hrs, Program Fee: Rs.8750/-

1. First Name : 2. Last Name : 3. Date of Birth :

Passport size

Photo

4. Father’s Name : 5. Gender : Female | Male 6. Category : GEN / OBC / SC / ST / INTER / MINORITY 7. Physically Handicapped : Yes / No Minority : Yes / No 8. Educational Qualification : 8th Pass/10th Pass/12th Pass/ Diploma / Graduate/Post Graduate

9. Identity Document (Any1) : Election ID card / Passport / Pan Card / Driving License / Adhar Card Identity Document No : 10. Address-Street No/Colony: City : District : State : Pin code : Phone No : 11. E-mail :( in Capital letter) : 12. Trainee’s Objective : Self Employment/Wage Employment/others_______________

13. If working, Organization Designation: 14. Mode of Payment : (i)Cheque (ii) Online (iii) UPI (iv) USSD (v) Cash Bank Name : Chq Number/Online/UPI/USSD Transaction Number: Date of Transaction:

15. Place of the Program : TRICHY , CHENNAI

Date: Applicant’s Signature:

Note: (1) Please bring original registration form with one photograph, one photocopy of any ID proof and NEFT/ONLINE transaction details. (2) Reservation of participants will be done on first come first serve basis due to limited seats availability.

Bank Details: Payment to be made by Net Banking/NEFT/RTGS favoring : CHIP SYSTEMS Current Account No: 0917256000796 | NEFT IFSC Code : CNRB0000917 Bank Name : Canara Bank | Branch: THYAGARAYA NAGAR, CHENNAI, INDIA