Chinese Drywall
-
Upload
housemasternaples -
Category
Documents
-
view
167 -
download
2
Transcript of Chinese Drywall
Real Estate Professionals
Information Series
© 2009 DBR
Problem (Tainted) Drywall
The Issue
Reports and investigative evidence indicate that certain gypsum drywall (plasterboard) products imported from China are defective.
These imports were needed due to a shortage of domestic drywall during the recent housing boom and post-hurricane reconstruction period
and were primarily used for ceilings and walls.
The majority of the Chinese imports arrived in the southeast U.S.
Imports
Over 50% of total was imported to Florida Imports to other areas included, but may not
have been limited to : • South (Carolinas , Louisiana, Texas, and
Mississippi)• West (Arizona, California, Colorado,
Nevada, New Mexico, and Washington)• Mid-Atlantic (Maryland, New Jersey, and
Virginia) • Midwest (Ohio)
The Scope and Timeframe
While the majority of imported Chinese drywall arrived between 2003 and 2006, some reports extend the timeframe of potential concern to
the period from 2001 to 2008. Areas with significant new construction and post-
hurricane renovations work from 2004 to 2007 likely account for most of the installed imports.
Some estimates indicate as many as 75,000 homes;
may be effected.
Reports of Problem Drywall Cases
This Information is based on self-reported cases meeting the the Florida Department of Health “Case Definition” for Problem (Tainted) Drywall.
(Click on the image for updated Case numbers.)
The Problem Experienced
Unpleasant odors Discoloration and corrosion of metals
• Copper pipe• Copper electrical wiring • Brass fittings and valves• Air conditioner coils• Metal household items
Potential safety issues from damaged building components
Health-related complaints
The Apparent Cause
Drywall containing sulfur compounds Outgassing (vapor release) of sulfides Sulfides mix with moisture resulting in:
• Unpleasant (rotten egg) odors • Corrosive acids
Corrosive acids cause soot-like residue, blackening and deterioration of even relatively
new metal components. Conditions are exacerbated by heat and
moisture.
Air Conditioner Coils
Blackening of Copper Tubing at Air Conditioner Coils
Copper Tubing
Blackening of Exposed Air Conditioner Tubing
Ground wire
Copper Wiring
Corrosion at Exposed Copper Wiring; corrosion can occur under the insulate sections as well
Electronic Components
Corrosion at Thermostats and Electronic Circuits
Refrigerator Tubing
Blackening of Exposed Copper Refrigerator Tubing
Plumbing Components
Blackening and Pitting of Exposed Plumbing Components
Suspect Drywall
A mix of domestic and imported drywall products was used in many homes. Only certain brands of imported Chinese drywall have been documented as causing problems. Imported 1/2-inch drywall is more likely to be defective. 5/8-inch drywall, commonly used in ceiling, appears to be less likely a problems.
Labels on Suspect Drywall
Some imported drywall is not labeled or clearly labeled. The labeling of suspect products include:
KNAUF-TIANJIN (the manufacturer of an identified defective imported product) MADE IN CHINA ASTM C36 (indicates an older product testing
standard)
Imported Drywall Labeling
Typically backside has no label or is stamped “MADE IN CHINA”
Manufacturer Labeling
Manufacturer “KNAUF-TIANJIN” Labeling
Mixed of Installed Products
Domestic Drywall “National Gypsum” Imported Drywall “MADE IN CHINA”
Assessment Options
Options include: Physical (Threshold) inspection Exposure of metal test strips to house air Bulk (sample material) testing Outgassing analysis of bulk samples Typical sampling costs ($500- $1800)
Use of multiple methods is recommended when attempting to identify/confirm the presence of potentially defective drywall.
Health and Safety Issues
Available data from investigations has not identified levels of corrosive gasses that
exceed those recognized as posing a risk to health. Excessive corrosion could lead to leakage of
copper gas piping or refrigerant tubing. Deterioration of electrical wiring creates a safety hazard. Look to Building and Health Departments for future information and guidance on local conditions.
Remedies
Research on remediation needs is ongoing. At this point, primary approach involves removal of drywall and damaged components, and elimination of any residue before replacements is primary approach. A threshold inspections, with corroborating evidence of concerns related to tainted drywall, is advised before any remedial action. Air quality control measures may help (conditions are generally less severe in low temperature, low humidity environments) but will not correct the
problem.
Legal Issues
Some builders have been attempting to address complaints from homeowners for several years; others have not accepted responsibility. Lawsuits filed in several areas have been merged into one federal court case. Additional suits/class-actions are expected.
Ongoing Investigations
Investigation of the imported Chinese drywall issue continues by federal and state agencies, as well as building science experts:
Consumer Product Safety Commission Center for Disease Control National Association of Home Builders Florida Department of Health
Additional Information and Images - Florida Dept of Health
Summation
Problems with odors and metal corrosion have been associated with tainted drywall.
Tainted drywall imported from China is a common factor; however, not all drywall imported from China is a problem and other products are suspect in some cases. The scope may be relatively limited (est.75,000 homes in only certain geographic areas, and a seven-year timeframe). Verification of problems will required inspection and testing. Potential concerns are greatest in warm, humid conditions. Many homes may contain both domestic and imported drywall. Drywall replacement appears to be only effective remediation. Potential health concerns are still being investigated. Investigation of the associated issues is ongoing.
For more information call or email our office at:(Add Local Contact Information)
Thank you!
Questions?