cHina beiging OFFice guangzHOu OFFice Heavy Duty CNC … Series.pdf · 2014-09-18 · Basic...
Transcript of cHina beiging OFFice guangzHOu OFFice Heavy Duty CNC … Series.pdf · 2014-09-18 · Basic...
Heavy Duty CNC Turning Center
L600/700 Series
2012-03-4000 Ver. 2 ENG
LISH
Head Office & Factory391-8 Gaumjung-Dong, Seongsan-Gu, Changwon, Gyeongnam, KoreaTEL : +82 55 280 9114, FAX : +82 55 282 9680 http : //www.hyundai-wia.com, E-mail : [email protected]
Seoul Office9th Floor Landmark Tower 837-36, Yeoksam Dong, Gangnam-Gu, Seoul, KoreaTEL : +82 2 2112 8452~63, FAX : +82 2 2112 8400
Hyundai-Wia MacHine aMerica cOrp. 450 Commerce Blvd. Carlstadt, New Jersey, U.S.A., 07072TEL : +1 201 636 5600 FAX : +1 201 636 5678http ://www.hyundai-kiamachine.com
cHicagO OFFice751 Landmeier Rd. Elk Grove Village, IL 60007 U.S.A.TEL : +1 847 640 8870(#201) FAX : +1 847 640 8701 http ://www.hyundai-kiamachine.com
L.a OFFice11155 Knott Ave, Suit F, Cypress, CA 90630 U.S.A TEL : +1 714 373 5480 FAX : +1 714 373 5485 http ://www.hyundai-kiamachine.com
argentina OFFiceAV, Alicia Moreau de Justo 1848 of 4-6 Puerto Madero(C1107AFL). Buenos Aires, Argentina TEL : +54 11 4313 1917 FAX : +54 11 4313 1929 http ://www.hyundai-kiamachine.com
Hyundai-Kia eurOpe gMbH Kaiserleipromenade 5, D-63067 Offenbach,Germany TEL : +49 69 271 472700 FAX : +49 69 271 472719 http ://www.hyundai-kia.de
raunHeiM Service centerKelsterbacher Str. 38-46 D-65479 Raunheim, Germany TEL : +49 6142 834 0 FAX : +49 6142 834 100 http ://www.hyundai-kia.de
cHina beiging OFFiceRoom 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing China 100027 TEL : +86 10 8453 9850~2 FAX : +86 10 8453 9853
SangHai OFFiceRoom 501 Ocular B/D, No.1366 Wu Zhong Road, 201103 Shanghai, Chian TEL : +86 21 3431 0370~2 FAX : +86 21 3431 0376
guangzHOu OFFiceRoom 906, International Finance Place, No.8 Huaxia Road, Pearl River New Town, Tianhe District, Guangzhou, China, 510623 TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597
cHengdu OFFiceRoom 2103, Block A, Times Plaza, Zongfu Road, Chengdu, China 610016 TEL : +86 28 8665 5550 FAX : +86 28 8665 2985
WuHan OFFice Room 43-05, New World International Trade Building(Wuhan) No.568 Jianshe Avenue, Jianghan District, Hankou, Wuhan, Hubei 430022 TEL : +86 - 27 - 5952- 3256~7 FAX : +86 - 27 - 5952 - 3258
QingdaO OFFiceRoom 1207, Zhaoyin Building, 36 Hongkong Middle Road, Qungdao, shandong 266071, China TEL : +86 - 532 - 8667-9333~5 FAX : +86 - 532 - 8667-9338
SHenyang OFFiceRoom 1304, Fortune Center No. 53 Bezhan Road Shenhs, D StrictShenyang, China 110013 TEL : +86 - 24 - 3228 - 6640 FAX : +86 - 24 - 3228 - 6642
india cHennai OFFiceNo.6, Papparambakkam Village, Thiruvallur Taluk & District - 602025 Tamilnadu, India TEL : +91- 44 - 3717 - 6333 FAX : +91 - 44 - 3717 - 6363
※ Specifications are subject to change for improvement without notice.
High Accuracy, High Rigidity, Large Capacity, Heavy-Duty CNC Turning Center
Turret
Easy to Operate
● BMT Turret● Mill Tool Holders● Machining
● FANUC 32i-A● Software
Basic Structure● Bed & Guide Way● Spindle● Tail Stock
Large Capacity, Easy to OperateHeavy-Duty CNC Turning Center
• Powerful Cutting Capacity with 3 step Gear Box
45kW [60Hp] (Max. Torque 6,928Nm [5,114 lbf.ft])
• High Speed Indexing Turret driven by Servo Motor
• C-axis Function (M Series)
• Programmable Tail Stock as Standard (Built-in Type)
• Standard Manual Guide Function with Fanuc 32i-A
L600/700 Series
HYUNDAI WIA MACHINE TOOL 2 3
BASIC STRUCTURE
The L600/700 features a 45° slant bed design which was developed using finite element analysis (FEA) to absorb vibration and minimize thermal growth, ensures a stable platform for powerful, precise cutting capabilities.
FEM Structure Interpretation
Heavy-Duty, Large Work Capacity, CNC Turning Center
Box guideways provide unsurpassed long-term rigidity and accuracy, even under the heaviest of cutting operations
All axis are driven by large diameter, high precision double-nut ball screws.
The double pretension design provides outstanding positioning and repeatability with virtually no thermal growth.
All ball screws are connected directly to the servo drive motors without gears or belts, to eliminate backlash.
Box Guide Way for All Axes
Pre-tensioned & Double Anchored Ball screw
Each axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal distortion.
Servo Drives
L700LMA
Ball-screw Deviation (Diameter)
Deviation (μm)
Number of Positioning Repeated (Time)
The 3-step gearbox offers powerful low end torque for heavy cuts as well as high speed rotation for improved surface finish
3-step Spindle Gear Box
• Thermally symmetrical headstock has special heat insulation board, which insulates heat from base to maintain high accuracy during long hour’s continuous operation
• To accomplish advanced stability even during heavy duty cutting, a combination of P4 level double cylindrical roller bearings and angular bearings are configured in multiple rows.
• Advanced double locking device, separating spindle bearing and pulley, to prevent releasing of spindle bearing pretension from interrupted cutting, heavy duty cutting, chuck cylinder operation, and belt pulley tension
Built-in Tail Stock
Geared Head Spindle
The built-in tail stock ensures high accuracy even during heavy, powerful cutting and can be controlled automatically or manually.
Spindle
Tail Stock
Taper
Quill Dia.
Quill Travel
Travel
Thrust
MT#6 (Built-In)
Ø160mm (Ø6.3″)
132.5mm (52″)
1,580[3,180]mm (62.2″[125.2″])
3,360kgf (7,407 lbf)
ITEM L600/700 Series
The C Axis is capable of 0.001° control with 100r/min positioning speed. Contour machining with the C axis is also possible, enabling the operator to machine outer shapes and pockets using rotating tools.
C axis Control
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Output (Max./Cont.)
Torque (Max./Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
inch
mm(in)
r/min
kW(HP)
N.m
-
-
deg
Opt. [21″/18″]
Ø152 (6″)
1,800
45/37 (60/50)
5,610 / 901.6
BELT + 3STEP GEAR
A2-15
360° (0.001° )
Opt. [24″]
Ø181 (7″)
1,500
45/37 (60/50)
6,928 / 1,117
BELT + 3STEP GEAR
A1-15
360° (0.001° )
ITEM L600LMA L700LMA
L600 Series L700 Series
[ ] : L Type
HYUNDAI WIA MACHINE TOOL 4 5
TURRET
Number of Tool
Tool Size
Indexing Time
OD
ID
Output (Max./Cont.)
Speed (rpm)
Torque (Max./Cont.)
Collet size
Type
12EA
□32mm (1.3″)
ø80mm (3.1″)
0.4sec/step
11/7.5kW (15/10HP)
3,000r/min
140/95.4N.m
Ø34(ER50)mm
BMT85
Latest generation BMT top plate increases tool performance and rigidity by securing each tool with 4 screws. Overall cutting power and capability has been improved for all applications, including; milling, drilling and tapping
For long parts, such as shafts, the optional hydraulic steady-rest(s) increases rigidity and minimizes vibration. Long bed (L) configurations of the L600/700 offer two steady rests for added support of oversized workpieces.
The large 12-station BMT turret enables the L600/700 Series lathes to perform high accuracy milling operations in a single set-up.
The BMT turret is driven by a high torque servo motor with a 0.4 second indexing time in either direction
Milling Turret ("M" TYPE)
Exchange of BMT Tools
Hydraulic Steady Rest
Turret
Mill Turret
Mill Turret Torque & Output
Chuck Work
460
460
990
990
Center Work
1,090
1,970
1,970
3,590
Center Work
300
300
600
600
Center Work
520
850
920
1,530
Max. Work (kgf)ITEM
L600A/MA
L600LA/LMA
L700A/MA
L700LA/LMA
Std. Work (kgf)
Load Capacity
Machining
Auto Q-Setter
Machining Ability
Turning 〈Material〈JIS〉:S45C(Carbon steel〉
Spindle rpm
Cutting speed
Cutting depth
Forwarding
Chip discharge
Tool diameter
Cutting speed
Cutting depth
Forwarding
Chip discharge
96 r/min
150 m/min
12 mm
0.65 mm/rev
1,170 cc/min
Ø180 mm
130 m/min
50 mm
0.14 mm/rev
814 cc/min
U-Drilling 〈Material〈JIS〉:S45C(Carbon steel〉
Machining Variation
Heavy-duty cutting (O.D) U-Drilling
L600/700 Series has the widest processing span within the same class, which increases available products. (Steady rest contact dia. : Max.13")
Cutting tools are calibrated quickly and accurately with the addition of a q-setter.
Each tool tip is touched off manually using a sensor that inputs the position automatically
Wide Processing Range
L700MA
HYUNDAI WIA MACHINE TOOL 6 7
The above result might be different by types of processing circumstance
O.D Cutting
Face Milling
Drilling
End Milling
I.D Cutting
O.D Hole Drilling
I.D Threading
Ball-End Milling
Milling Tool HolderLive milling tools may utilize an ER collet adapter, allowing both faces to be fixed. This provides increased accuracy and repeatability.
Angular Milling HeadStraight Milling Head
U-Drill
Collet&Cap
Endmill
Endmil
Drill
Tap
Drill
Tap
Face Cutter
Easy to Operate
Programming system for creating CNC programs easily.
HYUNDAI WIA's smart system is customized to provide user friendly functions which aid in the setup and operation of the machine.
M-Code List Opt. Calcultor Opt. Product Guide Opt.
HW-PGi F Programming Guide i for Fanuc System
HW-TL : Torque LimiterBy sensing the contact load amount on the machine, the torque limiter retracts immediately upon tool impact, to minimize damage to the machine
HW-TM : Tool Monitoring System Opt.
HW-TM
Torque Limiter Diagram
Realistic 3D solid animationPrograming is simulated
Example of easy programmingReadily programing with interactive type, without code
Engraving CycleEngraving Programs are instantly created
by entering the required text.
❖ When you order these options, Please contact sales man
• Real-time cut monitoring• 2 Channel screen display • Self learning for machining amount • 3 stage of status monitoring
(wear/break/no-load)
HYUNDAI WIA MACHINE TOOL 8 9
Easy to Operate
Programming system for creating CNC programs easily.
HYUNDAI WIA's smart system is customized to provide user friendly functions which aid in the setup and operation of the machine.
M-Code List Opt. Calcultor Opt. Product Guide Opt.
HW-PGi F Programming Guide i for Fanuc System
HW-TL : Torque LimiterBy sensing the contact load amount on the machine, the torque limiter retracts immediately upon tool impact, to minimize damage to the machine
HW-TM : Tool Monitoring System Opt.
HW-TM
Torque Limiter Diagram
Realistic 3D solid animationPrograming is simulated
Example of easy programmingReadily programing with interactive type, without code
Engraving CycleEngraving Programs are instantly created
by entering the required text.
❖ When you order these options, Please contact sales man
• Real-time cut monitoring• 2 Channel screen display • Self learning for machining amount • 3 stage of status monitoring
(wear/break/no-load)
unit : mm(in)
unit : mm(in)
Tooling System
Interference
L600MA/LMA L700MA/LMA
FACE HOLDER
FACE HOLDER
OD HOLDER
ID HOLDER
ID HOLDER
STRAIGHT MILLHOLDER
ANGULAR MILLHOLDER
EXTENDOD HOLDER
OD HOLDER
EXTENDOD HOLDER
L600A/LA L700A/LA
L600MA/LMAL700MA/LMA
L600A/LAL700A/LA
HYUNDAI WIA MACHINE TOOL 10 11
Specifications
L600A L600MA L600LA L600LMAø1,050 (41.3″)
ø820 (32.3″)
ø920 (36.2″)
1,650 (65″) 3,250 (128″)
ø117
Opt. [ø530/ø450 (20.9″/17.7″)]
ø152 (6″)
1,800
45/37 (60/50)
5,610 / 901.6
BELT + 3STEP GEAR
A2-15
- 360° (0.001°) - 360° (0.001°)
500/1,680 (19.7″/66.1″) 500/3,280 (19.7″/129.1″)
12/16 12/12
BOX GUIDE
12
□32×32 (1″×1″)
ø80 (3.1″)
0.4
- 11/7.5 (15/10) - 11/7.5 (15/10)
- 3,000 - 3,000
- 140/95.4 - 140/95.4
- Ø34 (ER50) - Ø34 (ER50)
- BMT85 - BMT85
MT6 (Built-in)
ø160 (6.3″)
132 (5.2″)
1,580 (62.2″) 3,180 (125.2″)
570 (150.6) 770 (203.4)
4.0 (1.06)
70
Over 50
220/60 (200/50)
6,220×3,025 (244.9″×119.1″) 7,820x3,025 (307.9″×119.1″)
2,700 (106.3″)
18,000 (3,968.3) 23,500 (51,808.6)
FANUC 32i-A
CAPACITY
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Boreb
Spindl Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Con.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Travel (X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Touque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
FEED
LIvE TOOL
TAILSTOCk
TANkCAPACITy
SPIndle
TuRRET
MACHINE
NC
POWERSuPPLy
❖ Specifications are subject to change for improvement without notice.
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m
deg
mm(in)
m/min
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gel)
ℓ(gel)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM
Specifications
[ ] : Option
CAPACITY
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Boreb
Spindl Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Con.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Travel (X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Touque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
FEED
LIvE TOOL
TAILSTOCk
TANkCAPACITy
SPIndle
TuRRET
MACHINE
NC
POWERSuPPLy
❖ Specifications are subject to change for improvement without notice.
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m
deg
mm(in)
m/min
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gel)
ℓ(gel)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM L700A L700MA L700LA L700LMA ø1,050 (41.3″)
ø820 (32.3″)
ø920 (36.2″)
1,650 (65″) 3,250 (128″)
ø165 (6.5″)
Opt. [ø610 (24″)]
ø181 (7.1″)
1,500
45/37 (60/50)
6,928 / 1,117
BELT+3STEP GEAR
A1-15
- 360° (0.001°) - 360° (0.001°)
500/1,680 (19.7″/66.1″) 500/3,280 (19.7″/129.1″)
12/16 12/12
BOX GUIDE
12
□32×32 (1″×1″)
ø80 (3.1″)
0.4
- 11/7.5 (15/10) - 11/7.5 (15/10)
- 3,000 - 3,000
- 140/95.4 - 140/95.4
- Ø34 (ER50) - Ø34 (ER50)
- BMT85 - BMT85
MT6 (Built-in)
ø160 (6.3″)
132 (5.2″)
1,580 (62.2″) 3,180 (125.2″)
570 (150.6) 770 (203.4)
4.0 (1.06)
70
Over 50
220/60 (200/50)
6,220×3,025 (244.9″×119.1″) 7,820x3,025 (307.9″×119.1″)
2,700 (106.3″)
18,000 (3,968.3) 23,500 (51,808.6)
FANUC 32i-A
Specifications
[ ] : Option
HYUNDAI WIA MACHINE TOOL 14 15
Standard & Optional
● : Standard ○ : Option ☆ : Prior Consultation X : Non Application - : Impossible
Door Inter-Lock
Total Splash Guard
Chuck Pressure Failure Detector
Back Spin Torque Limiter (BST)
Torque Limiter
Electric Device
Call Light
Call Light
Call Light & Buzzer
Electric Cabinet Light
Remote MPG
Spindle Load Meter
Spindle RPM Meter
Work Counter
Total Counter
Tool Counter
Multi Tool Counter
Electric Circuit Breaker
AVR(Auto Voltage Regulator)
Transformer & Cable
Auto Power Off
Measurement
Q-Setter
Automatic Q-Setter
Work Close Confirmation Device
(Only for Special Chuck)
Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)
Environment
Air Conditioner
Dehumidifier
Oil Mist Collector
Oil Skimmer
MQL (Minimal Quantity Lubrication)
Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)
Sub Operation Pannel
Bar Feeder Interface
Bar Feeder (FEDEK)
Extra M-Code 4ea
Automation Interface
I/O Extension (IN & OUT)
Parts Catcher
Turret Work Pusher (For Automation)
Hyd. Device
Standard Hyd. Cylinder
Standard Hyd. Unit
Software
Machine Guidance
HWTM (Tool Monitoring System)
DNC Software
Dialogue Program
ETC
Tool Box
Customized Color
CAD & CAM
❖ The specifications as above will only serve as a reference.
L600A(LA) L600MA(LMA)
● ●
● ●
○ ○
● ●
☆ ☆
● ●
○ ○
○ ○
○ ○
☆ ☆
○ ○
○ ○
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
○ ○
☆ ☆
○ ○
○ ○
– –
● ●
○ ○
○ ○
☆ ☆
○ ○
○ ○
☆ ☆
○ ○
○ ○
○ ○
○ ○
☆ ☆
○ ○
☆ ☆
X X
☆ ☆
– –
– –
○ ○
☆ ☆
○ ○
○ ○
X X
☆ ☆
● ●
● ●
☆ ☆
☆ ☆
○ ○
● ●
☆ ☆
☆ ☆
☆ ☆
Safety Device
Main Spindle Hollow Chuck 3 Jaw
Main Spindle Solid Chuck 3 Jaw
Standard Soft Jaw (1set)
Chuck Clamp Foot Switch
2 Steps Hyd, Pressure Device
Spindle Inside Stopper
5° Index
Cs-Axis (0.001°)
Chuck Open/Close Confirmation Device
2 Steps Chuck Foot Switch
Turret
Tool Holder
Mill Turret
Straight Milling Head (Radial)
Angular Milling Head (Axial)
Straight Milling Head (Radial)
Angular Milling Head (Axial)
Boring Sleeve
Drill Socket
U-Drill Cap
Long Boring Bar I.D Holder
Swivel Head
Tail Stock & Steady Rest
Built-In Tail Stock
Programable Tail Stock
Manual Type Steady Rest
Manual Type Hyd. Steady Rest
Programable Hyd. Steady Rest
Dead Center
2 Steps Tail Stock Pressure System
Quill Forward/Reverse Confirmation Device
Tail Stock Foot Switch
Coolant & Air Blow
Standard Coolant (Nozzle)
Bed Flushing Coolant
Chuck Coolant (Upper Chuck)
Gun Coolant
Spindle Thru Coolant (Only for Special Chuck)
Thru Coolant for Live Tool
Chuck Air Blow (Upper Chuck)
Tail Stock Air Blow (Upper Tail Stock)
Turret Air Blow
Air Gun
Spindle Thru Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)
Coolant Chiller
Chip Disposal
Coolant Tank
Chip Conveyor (Hinge/Scraper)
Special Chip Conveyor (Drum Filter)
Chip Box
18〞
21〞
24〞
18〞
21〞
24〞
Radial
Collet Type,1ea
Collet Type,1ea
Adapter Type
Adapter Type
1Set
2Sets
1Set
2Sets
6Bar
20Bar
570ℓ
770ℓ
Front (Right)
Rear (Rear)
Standard(180ℓ)
Swing(200ℓ)
Large Size(330ℓ)
Costomized
1 Color : ■
3 Color : ■■■
3 Color : ■■■B
LED Type
LED Type
Digital
Digital
Digital
6ea
9ea
70kVA
TACO
SMC
X Axis
Z Axis
Standard
High Speed
16Contact
32Contact
Main SP.
Hollow
58bar/63ℓ
Need Munsel No.
L600A(LA) L600MA(LMA)
○ ○
○ ○
– –
○ ○
○ ○
– –
● ●
● ●
○ ○
☆ ☆
☆ ☆
X ●
○ ○
○ ○
● ●
– ●
– ●
– ●
– ○
– ○
● ●
○ ○
● ●
LA ☆ LMA ☆
– ☆
● ●
● ●
☆ ☆
X X
LA ☆ LMA ☆
○ ○
LA ○ LMA ○
● ●
☆ ☆
● ●
● ●
● ●
● ●
○ ○
○ ○
☆ ☆
– X
○ ○
☆ ☆
☆ ☆
○ ○
☆ ☆
○ ○
○ ○
☆ ☆
☆ ☆
● ●
LA ● LMA ●
○ ○
X X
☆ ☆
○ ○
○ ○
○ ○
☆ ☆
Spindle & Chuck
● : Standard ○ : Option ☆ : Prior Consultation X : Non Application - : Impossible
HYUNDAI WIA MACHINE TOOL 16 17
Door Inter-Lock
Total Splash Guard
Chuck Pressure Failure Detector
Back Spin Torque Limiter (BST)
Torque Limiter
Electric Device
Call Light
Call Light
Call Light & Buzzer
Electric Cabinet Light
Remote MPG
Spindle Load Meter
Spindle RPM Meter
Work Counter
Total Counter
Tool Counter
Multi Tool Counter
Electric Circuit Breaker
AVR(Auto Voltage Regulator)
Transformer & Cable
Auto Power Off
Measurement
Q-Setter
Automatic Q-Setter
Work Close Confirmation Device
(Only for Special Chuck)
Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)
Environment
Air Conditioner
Dehumidifier
Oil Mist Collector
Oil Skimmer
MQL (Minimal Quantity Lubrication)
Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)
Sub Operation Pannel
Bar Feeder Interface
Bar Feeder (FEDEK)
Extra M-Code 4ea
Automation Interface
I/O Extension (IN & OUT)
Parts Catcher
Turret Work Pusher (For Automation)
Hyd. Device
Standard Hyd. Cylinder
Standard Hyd. Unit
Software
Machine Guidance
HWTM (Tool Monitoring System)
DNC Software
Dialogue Program
ETC
Tool Box
Customized Color
CAD & CAM
❖ The specifications as above will only serve as a reference.
L700A(LA) L700MA(LMA)
● ●
● ●
○ ○
● ●
☆ ☆
● ●
○ ○
○ ○
○ ○
☆ ☆
○ ○
○ ○
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
○ ○
☆ ☆
○ ○
○ ○
– –
● ●
○ ○
○ ○
☆ ☆
○ ○
○ ○
☆ ☆
○ ○
○ ○
○ ○
○ ○
☆ ☆
○ ○
☆ ☆
X X
☆ ☆
– –
– –
○ ○
☆ ☆
○ ○
○ ○
X X
☆ ☆
● ●
● ●
☆ ☆
☆ ☆
○ ○
● ●
☆ ☆
☆ ☆
☆ ☆
Safety Device
Main Spindle Hollow Chuck 3 Jaw
Main Spindle Solid Chuck 3 Jaw
Standard Soft Jaw (1set)
Chuck Clamp Foot Switch
2 Steps Hyd, Pressure Device
Spindle Inside Stopper
5° Index
Cs-Axis (0.001°)
Chuck Open/Close Confirmation Device
2 Steps Chuck Foot Switch
Turret
Tool Holder
Mill Turret
Straight Milling Head (Radial)
Angular Milling Head (Axial)
Straight Milling Head (Radial)
Angular Milling Head (Axial)
Boring Sleeve
Drill Socket
U-Drill Cap
Long Boring Bar I.D Holder
Swivel Head
Tail Stock & Steady Rest
Built-In Tail Stock
Programable Tail Stock
Manual Type Steady Rest
Manual Type Hyd. Steady Rest
Programable Hyd. Steady Rest
Dead Center
2 Steps Tail Stock Pressure System
Quill Forward/Reverse Confirmation Device
Tail Stock Foot Switch
Coolant & Air Blow
Standard Coolant (Nozzle)
Bed Flushing Coolant
Chuck Coolant (Upper Chuck)
Gun Coolant
Spindle Thru Coolant (Only for Special Chuck)
Thru Coolant for Live Tool
Chuck Air Blow (Upper Chuck)
Tail Stock Air Blow (Upper Tail Stock)
Turret Air Blow
Air Gun
Spindle Thru Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)
Coolant Chiller
Chip Disposal
Coolant Tank
Chip Conveyor (Hinge/Scraper)
Special Chip Conveyor (Drum Filter)
Chip Box
18〞
21〞
24〞
18〞
21〞
24〞
Radial
Collet Type,1ea
Collet Type,1ea
Adapter Type
Adapter Type
1Set
2Sets
1Set
2Sets
6Bar
20Bar
570ℓ
770ℓ
Front (Right)
Rear (Rear)
Standard(180ℓ)
Swing(200ℓ)
Large Size(330ℓ)
Costomized
1 Color : ■
3 Color : ■■■
3 Color : ■■■B
LED Type
LED Type
Digital
Digital
Digital
6ea
9ea
70kVA
TACO
SMC
X Axis
Z Axis
Standard
High Speed
16Contact
32Contact
Main SP.
Hollow
58bar/63ℓ
Need Munsel No.
L700A(LA) L700MA(LMA)
– –
– –
○ ○
– –
– –
○ ○
● ●
● ●
○ ○
☆ ☆
☆ ☆
X ●
○ ○
○ ○
● ●
– ●
– ●
– ●
– ○
– ○
● ●
○ ○
● ●
LA ☆ LMA ☆
– ☆
● ●
● ●
☆ ☆
X X
LA ☆ LMA ☆
○ ○
LA ○ LMA ○
● ●
☆ ☆
● ●
● ●
● ●
● ●
○ ○
○ ○
☆ ☆
– X
○ ○
☆ ☆
☆ ☆
○ ○
☆ ☆
○ ○
○ ○
☆ ☆
☆ ☆
● ●
LA ● LMA ●
○ ○
X X
☆ ☆
○ ○
○ ○
○ ○
☆ ☆
Spindle & Chuck
Controller
FANUC 32i-A
Controlled axes
Simultaneous controllable axes
Least input increment
Least command increment
High speed HRV control
Inch / Metric conversion
Interlock
Machine lock
Emergency stop
Stored stroke check 1
Stored stroke check 2, 3
Mirror image
Follow-up
Servo-off
Backlash compensation
Position switch
Unexpected disturbance
torque detection
High resolution moving control (HRM)
LCD / MDI
Automatic operation (memory)
MDI operation
Search function
Program restart
Wrong operation prevention
Buffer register
Program check function
Single block
Manual jog feed
Manual handle feedrate
Feed command
Feedrate override
Jog override
Rapid traverse override
Override cancel
Feed per minute, feed per rotation
Nano interpolation
Dwell
Axis control / Display unit
Operation
Feed functions
Program input & interpolation functions
Program input & interpolation functions Data in/output & editing functions
Thread retract
Variable lead threading
1st reference point return
Reference point return check
2nd reference point return
Program stop / End
Tape code
Optional block skip
Maximum programmable
dimensions
Program number
Absolute and incremental
programming
Decimal point input
Plane selection
Work coordinate system selection
Manual absolute
Direct drawing dimension
programming
G code system
Programmable data input
Sub program call
Custom macro B
Addition of custom macro
common variable
Multiple repetitive cycles
Multiple repetitive cycles Ⅱ
Canned cycles for turning
Manual guide i
Miscellaneous function
Miscellaneous function lock
Spindle speed command
Constant surface speed control
Spindle speed override
Spindle orientation
Rigid tapping
Tool function
Tool offset pairs
Tool offset
Tool nose radius compensation
Geometry / Wear compensation
Direct input of measured tool
compensation value B
Tool life management
Reader / Puncher interface
Memory card input/output
Embedded ethernet
Part program storage length
Number of registrable programs
expansion
Memory lock
Background editing
Extended part program edition
Self-diagnosis function
History display
Help function
External message
Run hour / Parts count display
Display of actual spindle speed
and T code
Actual cutting feedrate display
Operating monitor screen
Graphic display
Spindle / Servo setting screen
Selection of 5 optional language
Erase CRT screen display
Automatic data backup
Cs contouring control
Stored pitch error compensation
Polar coordinate interpolation
Cylindrical interpolation
Canned cycles for drilling
spindle orientation expansion
Spindle synchronous control
Torque control
Y axis offset
Angular axis control
Fast ethernet
Optional block skip
3rd and 4th reference point return
G code system
Part program storage length
Polygon turning
Helical interpolation
Dynamic graphic display
Protection of data at 8 levels
Tool Monitoring function
Options
Auxiliary / Spindle speed functions
Tool function / Tool compensation
Data in/output & editing functions
Max. 4 axes are available
X, Z axes
X, Z, C axes (M type machine)
X, Z, Y, C axes (Y type machine)
X, Z, B, C axes (MS type machine)
2axes / Linear and circular (Max. 4axes)
X, Z, Y, B axes : 0.001 mm (0.0001”)
C axis : 0.001 deg
X, Z, Y, B axes : 0.001 mm (0.0001”)
C axis : 0.001 deg
G20 / G21
Each axis / All axes
All axes
Over-travel
+/- 0~9999 pulses
(Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
10.4” Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handle
x1, x10, x100
F code feedrate direct command
0~200 % (10% units)
0~2,000 mm/min[79 ipm]
F1, F5, F25/F50, F100%
Positioning / Linear / Circular
(G00 / G01 / G02, G03)
G04, 0~9999.9999 sec
100 Mbps
256 Kbyte
Max. 500 programs
Copy, move, change of NC program
Alarm & operation display
Load meter, etc
Screen saver
Turn mill
Turn mill
Turn mill
Turn mill
Turn mill
Turn mill, Sub spindle
Sub spindle
Sub spindle
Y type machine
Y type machine
(Except SK150/T210/250SY)
100 Mbps (Option board is required)
9 ea
B / C
512 Kbyte
HWTM (Built-in Fanuc type)
G28, manual
G27
G30
M00, M01 / M02, M30
EIA / ISO
1 ea
+/- 9999.9999”
O4 digits
G17, G18, G19
G52 to G59
“ON” fixed
Included chamfering / Corner R`
A
G10
10 folds nested
#100 to #199, #500 to #999
Conversational programming
M4 digits
S4 digits, binary output
50% to 150% (10% units)
T2 + 2
64 pairs
G40, G41, G42
RS232C
Functions according to machine specification
•Figures in inch are converted from metric values.
•Design and specifications subject to change without notice.
Display, diagnosis & setting functions
HYUNDAI WIA MACHINE TOOL 18 19
ENERGY SAVING & ECO FRIENDLY
HYUNDAI WIA leads the way in Energy saving and Eco Friendly Machine Tools.
All machines are designed and built with power saving methods and
environmental consideration in mind.
MQL : Minimal Quantity Lubrication Energy Saving
Economy Lubrication SystemOil Skimmer
Mist Collector
Minimum quantity lubrication or near-dry machining has revolutionized how machining operations are cutting costs, improving tool life and being environmentally responsible.
The goal of this system is to spray only the amount of lubricant required to prevent heat and chip build up at the cutting tool or work piece face.
By applying lubricant only when the machines axis are moving lubrication consumption is reduced by 30% compared to standard systems.
Power Consumption Monitor
Real time power consumption can be monitored through the OP screen
ECO System
Coolant
(Wet Cutting)
MQL Cutting
(Semi-Dry)
Lubricating Minimal
Mist Oil
Compressed Air
Cooling
Chip Disposal
An oil skimmer can increase coolant and tool life by removing tramp oil contaminants.
Fine particles (1~10㎛) generated during machining can contaminate the working area and surrounding environment.
The mist collector catches and removes these particles to reduce the level of hazards in the air and reduce the accumulation of surface contaminates in your facility.
❖ This Catalogue made by recycle paper
Example of Machining Center Application
Opt.
Opt.
Opt.