CHEYENNE WALLETFINISHED SIZE: 7 3/4” WIDTH X 4 1/2” HEIGHT X 1” DEPTH (APPROX.)

The Cheyenne Wallet is a classy and stylish wallet for the big wallet lovers. The big size and convenient design allows you to store more than just cash and credit cards. Including steps for card slots and inner zipper pockets for coins. Conveniently pack your belongings and quickly access them whenever you need. The size is ideal for holding your small basic necessities such as earphones, lipstick, and more! The classic look and size can be great look for a night out with your evening dress.

1 | P a g e

CHEYENNE WALLET FINISHED SIZE: 7 3/4” WIDTH X 4 1/2” HEIGHT X 1” DEPTH (APPROX.)

The Cheyenne Wallet is a classy and stylish wallet for the big wallet lovers. The big size and convenient design allows you

to store more than just cash and credit cards. Including steps for card slots and inner zipper pockets for coins.

Conveniently pack your belongings and quickly access them whenever you need. The size is ideal for holding your small

basic necessities such as earphones, lipstick, and more! The classic look and size can be great look for a night out with

your evening dress. Designer’s Review

MATERIAL LIST

FABRIC

44” wide heavyweight home decorator OR quilting

weight cotton OR 44” leather or faux leather

(1/2) Yard for exterior fabric

(1/2) Yard for lining

INTERFACING

(1/2) Yard of 44” wide light weight fusible interfacing

(2) 2” X 2” heavy weight fusible interfacing for the

back of the magnetic snap

TOOL LIST

Ruler, Scissors, Chalk pencil, Pencil, Sewing machine,

Pins, Needle, Shape tool, fabric clips

* All seam allowances are 3/8” unless specified otherwise

*All units are in inches.

** After printing the pattern and taping the pieces

together, please follow the reference the provided size

guide (3" or 5").

** Patterns marked as A4 are for users who utilize the A4

standard paper size. If the pattern fits inside a single page

of letter and/or A4 paper then a separate A4 size file is not

included, as the pattern will work with both paper sizes.

OTHERS

(1) 8” All-purpose zipper for lining pocket

(1) 18mm Magnetic snap for wallet opening

(1) Spool of coordinating thread

© 2020 Copyright of ithinksew.com The finished products may only be sold when the

following conditions are applied.

*Full credit must be given to ithinksew.com for the

patterns (both online and offline). For example, when

products are sold online, they must include a statement

saying “This pattern was designed by ithinksew.com.”

When sold offline, a tag must be attached, stating, “The

finished products may only be made by crafters. It may

not be mass produced.” The conditions above may

change.

2 | P a g e

Cut out the Fabric

Draw the patterns directly onto the wrong side of

a single layer of fabric. Cut out the exterior,

lining, and interfacing. Fuse the interfacing on

the wrong side of the lining, following the

manufacturer’s guide.

EXTERIOR

(1) Wallet Panel

(2) Card Pocket Gusset Pieces

INTERIOR

(1) Wallet Panel

(2) Card Pocket Gusset Pieces

(1) Card Pocket Front Piece

(1) Card Pocket Back Piece

(2) Mini Card Pocket

(3) Cash Pocket Pieces

(2) Zipper Pocket Pieces

INTERFACING (no seam allowance needed)

(1) Wallet Panel

(1) Card Pocket Back Piece (Optional)

(1) Mini Card Pocket (Optional)

(1) Cash Pocket Pieces (Optional)

(2) 2” X 2” for the back of the magnetic snap

(heavy weight)

Tip. There are two options in cutting the interfacing, with or

without the seam allowance. Cutting the interfacing without

any seam allowance will give it a better overall shape; if you

would like to do this, use the original pattern (gray dotted line)

to cut out the interfacing.

Make the Mini Card Pocket

1 Place the mini card pocket pieces with right

sides together. Stitch around the edges and leave

a 2” opening on the top. Trim the corner seams.

Open

2 Turn the pocket right side out, push out the

corners, and press. Topstitch on the top edge

only, closing the opening.

Make the Cash Pocket

1 Place the cash pocket pieces with right sides

together. Pin and stitch the top and bottom

seams, leaving both shorter seams unstitched.

Backstitching on all ends.

2 Turn the cash pocket right side out through

the side opening and press. Topstitch on the top

edge only.

3 Double fold 1/2” (total 1”) and pin the top

seam of the remaining cash pocket piece towards

the wrong side of the fabric. Pin and sew along

the folded edge, 1/4” away from the seam.

4 Place the shorter cash pocket piece on top of

the longer cash pocket piece, aligning the bottom

3 | P a g e

raw seam. Pin and stitch the sides, backstitching

on all ends.

Make the Card Pocket

1 Make the card pocket using the card pocket

front piece. See Appendix B, Make the Card Pocket.

2 Place the card pocket back piece onto the

folded card pocket front with the right sides

together. Pin and stitch the top seam,

backstitching on both ends.

3 Open and front and back card pocket and

press the seams open.

Front Card

Pocket

Back Card

Pocket

4 Place the exterior and lining card pocket

gusset pieces with the right gusset together. Pin

and stitch one short seam. Backstitching on both

ends.

5 Open the card pocket gusset right side up.

Press the seams open.

6 Place the exterior side of the gusset pocket

piece to the front (assembled) card pocket, and

the lining side gusset to the back with right sides

together. Aligning the one side seam. Pin and

stitch together. Clip the overlapped seam. Repeat

step 4 to 6 for the other side.

7 Open both gusset right side facing up. Then

fold the front card pocket and back card pocket

with the wrong sides together following the stitch

line. Topstitch 1/8” away from the top seam,

backstitching on both ends.