CHEVROLET PARTS AND ACCESSORIES CATALOGtoms427impala.info/CT/68Parts/Parts-Gp6.pdf · chevrolet...

CHEVROLET PARTS AND ACCESSORIES CATALOG

YEAR MODEL DESCRIPTION PART NO LISTNO. USED PRICE

6.008 -`I" BEAM -HOUSING - HOUSING ASSY.-VENTILATOR, Front Axle CrossMember

(See Group 7.010 for Front Suspension Crossmember)38-40 UTILITY (exc. COE) ............ (U-bolt holes form rectangle, 2 3

/g x25/e ),

46-52 '/4 TON (exc. D-D) ............... (forged 3681642) (has daub of greenpaint) ........................... 3680905 1 41.75

41-55 !2 TON (1st Ser.) ................ (forged 3656872) (33Y4 offset) ........ 3656872 1 41.7541-46 YR, YS, YT, MR, MS, MY, MT, OE,

OF, OG, w/H.D ............... (forged 3100K-193-18776) .......... 3656629 k 1 60.3041-50 1% TON (exc. COE, SBC, H.D.) ... ("U" bolt holes form square, 2% x

2%),46-52 1 TON (exc. D-D) ............... (forged 3681642) ................... 3681642* 1 42.50

*NOTE: Heavy duty front axles are special equipment on series WB, WC, YR, YS, MR, MS,OR, OS and may be identified by the front wheel hub cap. This hub cap is attachedto the hub with six '/4-20 x 5/e hex. hd. bolts on a 3 7

4 diameter bolt circle.47-55 COE ........................ .. (forged 3678186) ................... 3678186 1 60.5047-50 D-D, SBC, 2 TON (exc. COE),51-52 D-D, UTILITY (exc. COE)........ (forged 3683214) ................... 3683214 1 66.7553-55 '/4 TON (1st Ser.) (exc. D-D) ...... (forged 3698295) (daub of green paint) . 3698294 1 41.7553-55 D,D, SBC, 2 TON (1st Ser.) (exc.

COE),53-55 1'/ TON w/H.D. (1st Ser.) ........ (forged 3698182) ................... 3698182 1 66.7553-55 1, 1'/2 TON (1st Ser.) (exc. D-D,

SBC, H.D.) ................... (forged 3698295) ................... 3698295 1 43.5055-59 %, 1 TON (2nd Ser.) (exc. D-D).... (forged 3711410) ................... 3711410 1 51.7555-57 D-D (2nd Ser.),58-59 D-D (Prop. Brake w/8 x 19.5 tires),60-67 Ser. 30 (D-D),62-67 Ser. 20 (D-D) w/7.00 x 17, 7.50 x

17 tires ...................... (forged 3711454) (3 3/64 end length) ..... 3852518 1 57.75

55 SBC (1st Ser.) .................. (forged 3711405) ................... 3711405 1 66.7555-59

14 TON (2nd Ser.) ................ (forged 3712013) ................... 3712013tt 1 43.50

ttNOTE: When installing on 1955-1956 (2nd ser.) models it is necessary toalso use 3755049 spacer in conjunction with 3720601 steering knucklethrust washer unit. Two copper thrust washers in unit must be discarded.When installing on 1957-1958 models it is necessary to also use3720601 steering knuckle thrust washer unit and to discard the kingpin thrust bearings.

58-59 D-D w/7.00 x 17.5 tires,60-63 Ser. 20 (D-D),64-67 Ser. 20 (D-D) (exc. 7.00-17, 7.50-

17) .......................... (forged 3852517) ................... 3852517 1 55.0064-66 G-10 ........................... (forged 3833377) ................... 3833377 1 41.1567-68 G-10 ........................... (forged 3892504) ................... 3892504 1 41.1567 G-20 ........................... (forged 3889538) ................... 3889538 1 55.0068 G-20 ........................... .................................... 3922648 1 55.0057-59 Ser. 3A w/4/WD ................. HOUSING, w/vent (NAPCO 37-15) ...... 3746642 1 270.0057-59 Ser. 3E-3G w/4/WD .............. HOUSING, w/vent (NAPCO 37-17) ...... 3746643 1 280.0060-63 Ser. 10 (4/WD) (1st Ser.) ......... HOUSING ASSY. (Dana 21817X) ........ 2403612 1 137.0060-63 Ser. 20 (4/WD) (1st Ser.) (exc.

H.D.) ........................ HOUSING ASSY. (Dana 21832X) ........ 2403613 1 155.0062 Ser. 20 (4/WD) w/H.D............ HOUSING ASSY. (Dana 22923X) ........ 3820820 1 149.0063-66 Ser. 20 (4WD) (2nd. Ser.) (exc.

H.D.) ........................ HOUSING ASSY. (Dana 23153X) ........ 3831913 1 155.0063-66 Ser. 20 (4/WD) w/H.D............ HOUSING ASSY. (Dana 23157X) ........ 3831914 1 225.0063-66 Ser. 10 (4/WD) (2nd Ser.) ......... HOUSING ASSY. (Dana 23166X) ........ 3831915 1 149.0067-68 Ser. 10 (4/WD) .................. HOUSING ASSY. (Dana 25385) ......... 3910596 1 155.0067-68 Ser. 20 (4/WD) (exc. H.D.) ........ HOUSING ASSY. (Dana 25351X) ........ 3912011 1 165.0067-68 Ser. 20 (4/WD) (w/H.D.).......... HOUSING ASSY. (Dana 25395X) ........ 3912012 1 225.0057-59 Ser. 3 w/4/WD .................. VENTILATOR, front (NAPCO 10332) • • . 2140049 1 (5.387)67-68 4/WD .......................... VENTILATOR (Dana 34472) ........... 3912015 1 1.95

©-967Chevrolet Motor Division 6.008General Motors Corporation 929

6.009 STOP -BOLT-GASKET, Steering Knuckle

38-42 UTIL., AM, BM (exc. MY, MS, MT,COE),

47-50 3/4k 1, 11.2 TON (exc. D-D, SBC),

53-55 '/a, 1, 1'/2 TON (1st Ser.) (exc. D-D, (13/ x 2 O.L. w/rolled edges) (not usedSBC, 2SPD.) .................. with 7.50-20 or 8.25-20 tires) ...... 3653923 2 .35

41-55 ';Z TON, AL, AN, BL, BN, (1stSer.) ......................... .................................... 3656527 2 .35

46 COE,47-55 D-D, UJ, UK, VJ, VK, SBC,

2 TON (1st Ser.),48-55 1'2 TON w/H.D. (1st Ser.) ....... (1/16 x 2 ;/ 6 O.L. w/rolled edges) ..... 3678194 2 .3546 SBC, 2 TON (exc. COE),46-55 COE w/8.25 x 20 tires ........... (flat stamping w/angle) ............. 3683847 2 .4553-55 1'/2 TON w/7.50 x 20, 8.25 x 20

tires (1st Ser.) (exc. SBC, H.D.) (115/33 x 2 long) ..................... 3705492 2 .4555-59 Ser. 3 (2nd Ser.) (exc. H.D., D-D,

SBC),60-68 4/WD .......................... BOLT, stop ( 3/8 -24 x 1 '/ 6) ............. 3711876 2 .1055-56 D-D (2nd Ser.),58-59 Ser. 3 (D-D) w/7.00 x 17.5,

8 x 17.5 tires,60-63 Ser. 30 (D-D),62-63 Ser. 20 (D-D) w/7.00 x 17,

7.50 x 17 tires ................ BOLT, stop ('/ b-20 x 15/6) ............ 3715888 2 .15

57 Ser. 3 (D-D),61 Ser. 20 (D-D),62-63 Ser. 20 (D-D) (exc. 7.00 x 17,

7.50 x 17 tires),64-65 Ser. 20-30 (D-D) ................ BOLT, stop ('/ 6 -20 x 1'/8 ) ............ 3712568 2 .1064-68 G-10-20 ........................ BOLT, stop ( 3/-24 x 13/4).............. 3833407 2 .1060-62 Ser. 10 thru 30 (D-D, 4/WD.),61-62 Ser. 10 (D-D),63-65 Ser. 10 (exc. 4/WD) ............. GASKET, strg. knuckle to frt. brake

flangeplate ....................... 3781778 2 (5.002)63-68 Ser. 20-30 (exc. D-D, 4/WD) ...... GASKET, strg. knuckle to frt. brake

flange plate ....................... 3821610 2 (5.002)

6.020 KNUCKLE ASSEMBLY - KNUC KLE U NIT -SPINDLE ASSY., Steering

39-42 COE (Reg. Prod.),40-42 UTIL. w/H.D. (exc. COE) ........ right, w/bshg. (forged 3651036) (use42 SBC (Reg. Prod.) ............... w/No. 310OY389-18957 or 3100K193-46 UTIL. (Reg. Prod.) (exc. OR, OS,

PJ, PK) ..................... 18776 forged on "I" beam)......... 603270t 1 32.15TNOTE: Used on 1946 Models when'/ 6 in. Hub Bolts are used.

39-48 PASS. (exc. JB, KB) ............ (forged 3664549) .................. 6076269 2 17.609NOTE: Enlarge the chamfer on the flange plate pilot hole to clear the larger

radius. Also, when using 607626 on 1939-40 models, it will benecessary to use 909552 cone, 3656535 deflector and 3656536 felt.

46-49 SBC, 2 TON .................... 1 %6 large brg. dia. (forged 3678183)... 3859640 2 29.7549-52 UD, UK, VJ, VK,49-55 1'2 TON w/H.D. (1st Ser.),49-55 SBC, 2 TON (1st Ser.),67 Ser. 30 (D-D) w/11,000 lb. axle ... .................................... 3859642 2 29.7049-54 PASS .......................... (forged 3693446)................... 3696323 2 20.5551-59 12 TON ......................... (forged 3708831) ................... 3709756 2 21.7553-62 CORVETTE .................... (forged 3693446) (daub of yellow paint) 3737594 2 20.5553-55 14 TON (exc. SBC, H.D.) (1st

Ser.),53-59 ',4, 1 TON (exc. D-D, H.D.) ....... (forged 3698332) .......... ........ 3859635A 2 22.75

&.NOTE: When using in place of previous numbers use (2) 3855214 bushing.53-63 D-D (exc..102 W.B.) ............. (forged 3697466) (1'/ large brg. dia.) .. 3859644 2 24.7555-57 PASS . ......................... (forged 3707555) ................... 3713906§ 2 20.55

§NOTE: Upper knuckle attaching holes purposely omitted on late assemblies,interchangeability not affected.

57-59 Ser. 3A w/4/WD ................ w/bushing (NAPCO 227-6) .......... 3747109 2 43.9557-59 Ser. 3E w/4/WD ................. w/bushing (NAPCO 227-13).......... 3747110 2 46.0057-59 Ser. 3G w/4/WD ................ w/bushing (NAPCO 227-14) ......... 3747240 2 43.9558 PASS . .......................... (forged 3441830) ................... 3749438 2 20.55

6.009-6.020

C-1967Chevrolet Motor Division

930 General Motors Corporation

59-64 PASS.,63-64 CORVETTE ....................60-62 Ser. 10 (exc. 4/WD) ..............60-62 Ser. 20 (exc. 4/WD, D-D) .........60-61 4/WD (1st design) ...............63-65 Ser. 10 (4/WD) (2nd Ser.)

(1st design) ..................60-61 4;! WD (1st design) ...............63-65 Ser. 10 (4/WD) (2nd Ser.),

(1st design) ..................60-62 Ser. 30 (exc. D-D) ...............61-63 4/WD (2nd design) (1st Ser.), (exc.

H.D.) .. .....................63-66 Ser. 20 (4/WD),65 Ser. 10 (4/WD) (2nd design) .......61-63 4/WD (2nd design) (1st Ser.), (exc.

H.D.)63-66 Ser. 10-20 (4/WD) (1st design),65 Ser. 10 (4/WD) (2nd design).......

(forged 3828580) ................... 3828580 2 21.25(forged 3757300) ................... 3797525 2 21.00(forged 3757301) ................... 3769545 2 23.00right (DANA 31410)

( % I.D. tapered hole) ............... 2403677 1 13.30left (DANA 31411)

( % I.D. tapered hole) ............. 2403678 1 16.80(forged 3735841) ................... 3769546 2 23.00

right (DANA 31948)

('/ I. D. tapered hole)............ 3799744 1 14.45

3799743 1 17.503820834 1 36.003820833 1 37.753864166 2 22.353860970 2 18.85

3901232 2 30.753855004 2 21.253864023 2 21.252499923 1 19.753898025 1 20.553898003 1 22.503910599 1 47.953912009 1 39.953912010 1 39.953910598 1 17.953859642 23922651 1 29.25

3924384 1

3867825* 2 24.85

left (DANA 31949) (11/ taperedhole) ...........................

62-66 Ser. 20 (4/WD) w/ H. D. ........... right (DANA 32202) .................62-66 Ser. 20 (4/WD) w/H. D. ........... left (DANA 32203) .................63-68 Ser. 20-30 (exc. D-D, 4/WD) ...... ....................................64-68 Ser. 10 (exc. 4/WD) .............. ....................................64-66 Ser. 20-30 (D-D),67 Ser. 20-30 (D-D) (exc. 11000 lb.

axle) ........................ ....................................65-66 PASS . ......................... ....................................65-68 CORVETTE ....................66 Ser. 10 (4/WD) (2nd design)....... left (Dana 34241) ...................67 PASS. (exc. disc brakes) ......... ....................................67 PASS. w/disc brakes ............ ....................................67-68 Ser. 10-20 (4/WD) (exc. H.D.) ..... left (DANA 34565) ..................67-68 Set. 20 (4/WD) w/H.D. ........... left (DANA 34577) ..................67-68 Ser. 20 (4/WD) w/H.D. ........... right (DANA 34576) .................67-68 Ser. 10-20 (4/WD) (exc. H.D.) ..... right (DANA 34564) .................67 Ser. 30 D-D w/11,000 lb. axle ..... ....................................68 G-20 ........................... ....................................68 PASS. w/disc brake,68 CORVETTE .................... ....................................38-42 UTILITY (exc. COE, MT, MY),46-50 „ 1 1 1 2 TON (exc. D-D, SBC) ..... KNUCKLE UNIT (consists of knuckle51-52 '/;, 1 TON (exc. D-D) ............. assy., 2 cones and 2 deflectors)......

•NOTE: Enlarge the chamfer on the flange plate pilot hole to clear the larger

radius.41-42 COMM ......................... KNUCKLE UNIT (consists of knuckle46-50 'z TON ........................ assy., and attach. parts-forged

48-52 D-D ...........................

63 Ser. 10 ........................64-68 G-10 ...........................67 G-20...........................60-68 Ser. 10 (4/WD) ..................

60-68 Ser. 20 (4/WD) ..................

3708831-4 holes'/, 6 dia.) ...........KNUCKLE UNIT (consists of knuckle

assy., 2 cones and 1 deflector).......KNUCKLEUNIT .....................KNUCKLEUNIT .....................KNUCKLEUNIT .....................SPINDLE ASSY. w/bushing

(DANA 22137X) ....................SPINDLE ASSY. w/bushing

(DANA 2131X) .....................

3708866 2 21.75

3867826 2 29.703818705 2 21.003833405 2 21.753889541 2 27.50

2403625 2 22.75

2403626 2 23.75

6.021 BUSHING-BEARING-PLUG-CONE-CU P-SPACER, Steering Knuckle King Pin

38-42 UTIL. (exc. COE, WB, WC, MT,MY),

46-50 '/,, 1, 1z TON (exc. D-D, SBC),51-52 3/;, 1 TON (exc. D-D) ............ (11/4 x 1 I .D.) 365312......................38-42 UTIL. (exc. COE, MT, MY),46-50 3/q, 1, 1

14 TON (exc. D-D, SBC),

51-52 34, 1 TON (exc. D-D) ............ (.020 O.S.) (stamped G.M. 45p )........ 60424538-40 HB, JB, KB, KC, KD, KE, KF .... (1'/4 x 3/4 I.D.-w/groove) ............. 593044

C-1967Chevrolet Motor DivisionGeneral Motors Corporation 931

4 .70

4 .704 .70

6.020-6.021

(l a x 1344) ....................... 602124

( 1 °46 I.D.) ......................... 3859639

(.010 O.S.) ........................ 609880

(use w/3678186 or 3683214forged on "I" beam) (std.) ......... 3686588

4 .70

4 .70

4 .70

4 .70

(.020 O.S.) ........................ 3853952

(1Y x 1 I.D.) ...................... 3698333

(.020 O.S.) (stamped G.M. 56) ........ 3705556(NAPCO 21120) .................... 3747106spindle (DANA 30339) .............. 2402596(DANA 31002) (bronze) ............. 3820826(Std.) (Delrin) ...................... 3857029(std.) (bronze) ..................... 3853951

(1°/32 O.D. x 1'/a) (Delrin) ............ 3855212

strg. knuckle ...................... 3889542(33/33 O.D. x'/e I.D.) ................. 3922652(32'/32 O.D. x 1Y8 I.D.) ............... 3925240

BEARING, frt. axle hsg. upr. trunnion(NAPCO 14531) .................... 2352850

4 .70

4 .70

4 .70

2 2.702 .902 8.854 .704 .70

4 .704 .70

4 .704 .70

2 7.25

38-40 HA, JA, KA, KH,41-42 PASS., COMM.,46-54 PASS.,46-59 ',^z TON,53-62 CORVETTE ....................41-50 COMM., UTILITY,51-52 COMM . ........................41-42 COMM.,46-59 !2 TON .......................46-59 D-D, UJ, UK, VJ, VK, SBC,48-55 1 1,2 TON w/H.D. (1st Ser.) ........60-63 D-D (exc. 102 W.B.) .............

46-59 D-D, UJ, UK, VJ, VK, SBC,48-55 1' 2 TON w/H.D. (1st Ser.),60-62 D-D,63-64 Ser. 20-30 (D-D) (1st design) .....53-58 3/4 , 1, 1'4 TON (exc. D-D, SBC,

H.D.) (1st Ser.) ...............53-55 3/a , 1, 1Yz TON (exc. D-D, SBC,

H.D.) (1st Ser.) ...............57 -59 ALL w/4/WD ...................60-68 4/WD ..........................

62-68 Ser. 20 (4/WD) w/H.D............64-67 G-10 ...........................64 Ser. 20-30 (D-D) (1st design)......64-66 Ser. 20-30 (D-D) (2nd design),67 Ser. 20-30 (D-D) ................67 G-20...........................68 G-20 ...........................68 G-10 ...........................57-59 ALL w/4/WD ...................

42-59 UTIL.,53-63 D-D (exc. 102 W.B.),67 Ser. 30 (D-D) w/11000 lb. axle

(exc. 327) .................... PLUG, king pin bearing ............... 385964657-59 ALL w/4/WD ................... CONE, frt. axle housing lower trunnion

( Timken 21025) .................... 18784660-68 4/WD (exc. H.D.) ................ CONE, bearing (Timken 11590) ......... 941547962-68 Ser. 20 (4/WD) w/H.D. ........... CONE, bearing (Timken 23100) ......... 17335657-59 ALL w/4/WD ................... CUP, frt. axle housing trunnion (Timken

21212) ............................ 13684960-68 4/WD (exc. H.D.) ................ CUP, bearing (Timken 11520) .......... 941548062-68 Ser. 20 (4/WD) w/H.D. ........... CUP, bearing (Timken 23256) .......... 12156351-54 PASS.,53-62 CORVETTE (exc. H.D.

brake/susp.) .................. SPACER, strg. knuckle,51-59 "i TON ......................... strg. knuckle upper ("Ia O.D. x 23/2

long) ............................. 369356757-62 CORVETTE w/H.D. brake/susp. .. SPACER, knuckle ( 134 9

O.D. x 29/33 long) . 373566464-67 Ser. 20-30 (D-D) (exc. 11000 lb. SPACER, lower bushing (1 7/z O.D. x

axle) ........................ 1'/64I.D.) .......................... 3855213

6.022 NUT-NUT ASSY.-RING, Steering Knuckle Spindle

38-42 HA, JA, K, A, B,46-67 PASS., CORVETTE, Y TON

(exc. 4/WD, G-10),

2 .10

2 3.684 2.662 4.70

4 2.12

4 1.464 2.44

4 .14

4 .53

2 .05

65-67 G-10 ........................... (3/4-20 hex.)....................... 378137 2 .3038-42 UTIL. (exc. COE, MT, MY),46-55 '/4 , 1 TON, UTIL. (1st Ser.),55-59 3/a, 1 TON (2nd Ser.) (exc. 4/WD),60-63 Ser. 20-30 (exc. D-D, 4/WD) ...... (use w/3681101 forged on "P' beam)64-68 Ser. 20-30 (exc. 4/WD),67-68 G-20 ........................... (2/3a-20).......................... 37965639-42 COE (Reg. Prod.),40-42 UTIL. w/H.D. (exc. COE) ........ (3/4-16) (use w/3100K-193-1877646 OE, OF, OG, OH, 01, OJ, OW, OY . forged on "I" beam) .............. 37442757-59 Ser. 3E-3G w/4/WD ............. wheel bearing adjusting (1 3/4-16 hex.) . 374723257-59 Ser. 3E-3G 4/WD ............... (l4-16 hex.) ...................... 3747233

6.021-6.022

932

2 .30

2 (6.104)

2 2.002 2.15

G-1967Chevrolet Motor Division

General Motors Corporation

TRUNNION ASSY., U-joint, all locationsw/finger diameter (.773) .............

BEARING, front axle trunnion(Dana 2-6-29) ......................

BEARING, U-joint trunnion, all locationsw/finger diameter over (.750) ........

3708961 A.R.(5.548)

3780158 8 1.20

2296504 A.R.(5.566)

6.055 SHAFT, Front Axle

57-59 Ser. 3A w/4/WD ................ .57-59 Ser. 3A w/4/WD ................ .57-59 Ser. 3E-3G w/4/WD ..............57-59 Ser. 3E-3G w,'4 /WD ............. .57-59 ALL w/4/WD ...................

*NOTE: Includes Ball Bearing,60-68 4/WD (exc. H.D.) ................60-68 4/WD (exc. H.D.) ................60-68 4/WD (exc. H.D.) ................62-68 Ser. 20 (4/WD) w/H.D. ...........62-68 Ser. 20 (4/WD) w/H.D............

62-68 Ser. 20 (4/WD) w/H.D........... .

left, inner (351/4 O.L.) ............... 2352873 1 34.25

right, inner (17% O.L.) .............. 2352872 1 29.50left, inner (355/l6 O.L.) .............. 2352960 1 34.25right, inner (18 5/ 6 O.L.) ............. 2352959 1 29.50outer (10'/4 O.L.) ................... 3752092* 2 98.65

right, inner (19 5/ 6 O.L.) (Dana2-82-551-1) ...................... 2403697 1 27.00

left, inner (36 15/ 6 O.L.) (Dana2-82-551-2) ...................... 2403698 1 30.40

outer (1027/32 O.L.) (Dana 2-82-391).... 2403699 2 20.50right, inner (18 O.L.) (Dana 3-82-

471-1) .......................... 3821658 1 25.25left, inner (35% O.L.) (Dana 3-82-

471-2) .......................... 3821657 1 28.25outer (10'/ 6 ) (Dana 3-82-411) ......... 3821659 1 19.25

6.058 RING-SEAL-GUIDE-REPAIR KIT-TRUNNION ASSY.-BEARING,Front Axle Shaft

57-59 ALL w/4/WD ................... attach inner to outer shaft and U-joint(1%3 O.D.-11/16 gap) ...............

60-68 4/WD (exc. H.D.) ................ trunnion snap (Spicer 2-7-99).........57-59 ALL w/4/WD ................... SEAL, outer (2'/6 O.D.) (stamped 206116)60-67 4/WD ..... .................... SEAL, inner (Dana 17478-1) (2 9/32 O.D.). .60-68 4/WD .......................... GUIDE (Dana 30703) ..................60-67 4/WD .......................... REPAIR KIT, U-joint .................

tNOTE: Consists of 1 drum-4 brgs.-4 snap rings60-62 4/WD,63-64 Ser. 20 w/H.D . ................. .

60-64 4/WD (exc. H.D. axle) ...........65-68 Ser. 10 (4/WD) (exc. H.D. axle) ...60-65 4/WD w/H.D ....................

6.063 FL A NGE-RING -NUT-SHIM-GASKET, Front Wheel Hub

2352889 2 .301181735 8 .102352810 2 1.352403665 2 .552102599 2 .402409783t 2 5.50

57-59 Ser. 3A w/4/ WD .................57-59 Ser. 3E-3G w/4/WD..............60-68 Ser. 10 (4/WD) ..................60-68 Ser. 20 (4 'WD) ..................57-59 ALL w /4/WD ...................57-59 Ser. 3E-3G w/4/WD..............57-59 Ser. 3A w/4 /WD .................57-59 Ser. 3A w/4/WD .................57-59 Ser. 3E-3G w/4/WD..............57-59 Ser. 3E-3G w/4/WD..............60-68 Ser. 20 (4/WD) ..................

(3"//z O.D.) ........................ 3747234 2 14.55(4'/ O.D.) ......................... 3747235 2 11.50(Dana 31125) ...................... 2403684 2 7.15(Dana 30340) ...................... 2403690 2 10.65

RING, flange (1532 I.D. x 1 54 6 O.D.) ..... 2222505 2 .50NUT, attaching ( 3

/-24) ............... 442799 12 (8.917)SHIM(.010) .......................... 3747224 A.R. .35SHIM(.030) .......................... 3747225 A.R. .55SHIM(.010) .......................... 3747228 A.R. .35SHIM(.030) .......................... 3747229 A.R. .60GASKET, flange (Dana 30344) ......... 2403691 2 .10

6.103 ARM-ARM UNIT, Steering Knuckle

38-42 UTIL., (exc. H.D., COE, MT, MY),46-55 1'/2 TON (1st Ser.) (exc. UJ, UK,

VJ, VK, SBC, H.D.),46-59 %, 1 TON (exc. D-D, H.D.) .......39-48 PASS. (exc. JB, KB) .............39-48 PASS. (exc. JB, KB) ............46-55 D-D, UJ, UK, VJ, VK, SBC, 2 TON

(1st Ser.),48-55 1'/ TON w/H.D. (1st Ser.) ........49-54 PASS . .........................49-54 PASS..........................51-55 'z TON (1st Ser.) ................53-62 CORVETTE ....................53-62 CORVETTE ...................55 PASS..........................

(forged 3713017) ...................left(forged 3667231) ................right (forged 3667232) ..............(forged 3678185) (use w/3678186 or

3681101 frgd. on "I" beam on 1946models) .........................

left (forged 3709275) ................right (forged 3709276) ...............(forged 3694233) ...................left (daub of yellow paint) ...........right (daub of y ellow paint) ..........left (forged 3708191) ...............

3713017 1 5.953667231 1 4.013667232 1 4.01

3678185 1 8.503709275 1 4.203709276 1 4.203694231 1 7.303733451 1 4.953733452 1 4.953708191 1 4.20

6.055-6.103

©_1967Chevrolet Motor Division


55 PASS .......................... right (forged 3708192) .............. 3708192 1 4.2055-59 1 z TON (2nd Ser.) ............... (forged 3711777) ................... 3711883 1 6.7555-57 D-D (2nd Ser.),58-59 D-D (Prop .Brake w/8 x 19.5 tires),60-63 Ser. 30 (D-D) ................... (forged 3715889) ................... 3715889 1 7.0556-57 PASS .......................... left (forged 3737215) ............... 3737215 1 4.7256-57 PASS .......................... right (forged 3737216) .............. 3737216 1 4.7258-59 D-D w/7 x 17.5, 8 x 17.5 tires,60-63 Ser. 20 (D-D) ................... (forged 3713373) ................... 3713373 1 8.7558-59 ALL w,4/WD ................... steering third ...................... 3754009 1 21.7558 PASS .......................... left (forged 3742059) ............... 3742059 1 4.7258 PASS .......................... right (forged 3742060) .............. 3742060 1 4.7259-64 PASS . ......................... left (forged 3772175) ................ 3772175 1 4.9059 -6

4PASS . ......................... right (forged 3772176) ............... 3772176 1 4.90

60-62 Ser. 10 (exc. 4/WD) ............. left (forged 3769287) ............... 3769287 1 8.2060-62 Ser. 10 (exc. 4/WD) ............. right (forged 3769288) .............. 3769288 1 8.2060-62 Ser. 20-30 (exc. 4/WD, D-D) ...... left (forged 3766491) ............... 3766491 1 8.2060-62 Ser. 20-30 (exc. 4/WD, D-D) ...... right (forged 3766492) .............. 3766492 1 8.2060 .65 Ser. 10-20 (4/WD) ............... (Dana 22627X) ..................... 3812746 1 23.5066 Ser. 10-20 (4 /WD) ............... (Dana 25248X) ..................... 2499928 1 33.5062-66 Ser. 20 (4/WD) w/H.D............ (Dana 22879X) ..................... 3820819 1 29.9563-65 Ser. 20-30 (exc. D-D, 4/WD) ...... left (forged 3852175) ............... 3852175 1 8.6063-66 Ser. 20-30 (exc. D-D, 4/WD) ...... right (forged 3852176) ............... 3852176 1 8.6063-66 Ser. 10 (exc. 4/WD) .............. left (forged 3818709)................ 3818709 1 8.6063-66 Ser. 10 (exc. 4/WD) .............. right (forged 3818710)............... 3818710 1 8.6064-67 Ser. 20 (D-D) (exc. 7.00-17-6 or 8

ply tire or 7.50-17-8 ply tire).... (forged 3843325) ................... 3843325 1 8.9564-66 Ser. 20 (D-D) w/7.00-17-6 or 8

ply tire or 7.5 0-17-8 ply tire,64-67 Ser. 30 (D-D) ................... (forged 3843327) ................... 3843327 1 7.0564-66 G-10 ........................... (forged 3833435) ................... 3833435 1 6.3065-66 PASS . ......................... left (forged 3855005)................ 3855005 1 5.1565-66 PASS . ......................... right (forged 3855006)............... 3855006 1 5.1567-68 G-10 ........................... (forged 3892509) ................... 3892509 1 7.9567-68 G-20 ........................... (forged 3889573) ................... 3889573 1 13.2567 PASS.,68 PASS. (exc. disc brake).......... right (forged 3909786) ............... 3909786 1 5.5067 PASS.,68 PASS. (exc. disc brake).......... left (forged 3909785) ................ 3909785 1 5.5067 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (exc. 4/WD)........... right .............................. 3889262 1 9.2567 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (exc. 4/WD)........... left ............................... 3889261 1 9.2567-68 Ser. 10 (exc. 4/WD) .............. left ............................... 3889259 1 9.2567-68 Ser. 10 (exc. 4/WD) .............. right .............................. 3889260 1 9.2567-68 Ser. 20 (4/WD) w/H.D. ........... left (Dana 25401X) ................. 3912013 1 32.2567-68 Ser. 10-20 (4/WD) (exc. H.D.) ..... left (Dana 25349) ................... 3910597 1 22.5068 PASS. w/disc brake ............. left ............................... 3928625 168 PASS. w/disc brake ............. right .............................. 3928626 163-67 CORVETTE .................... ARM UNIT, strg. knuckle (L.H.)........ 3829497♦ 1 7.7563-67 CORVETTE .................... ARM UNIT, strg. knuckle (R.H.)........ 3829498♦ 1 7.7568 CORVETTE .................... ARM UNIT, steering knuckle (LH) ..... 3933081 168 CORVETTE .................... ARM UNIT, steering knuckle (R.H.)..... 3933082 1

ANOTE: Consists of 1 arm and 1 rivet.

ARM_KIT, Steering and 3rd

38-46 COMM. (exc. DR, DS) ............ (forged 593401 or 3667235) .......... 593405 1 6.9038-42 UTIL. (exc. MT, MY, COE),46 DR, DS, OR, OS, PJ, PK ......... (forged 3667237) (1/2

bolt holes) ...... 596575 1 7.5040-46 WB, WC, YR, YS, YT, MR, MS, MY,

MT, OE, OF, OG, OR, OS, OW, (forged 3122V542) (use w/3100K-193-OYw/H.D .................... 18776frgd. on "I" beam) ......... 604471 1 17.95

47-52 3/4 , 1 TON (exc. D-D),47-50 1 1/ TON (exc. SBC) ............. (forged 3685897) (w/ball stud) ....... 3685901 1 10.5047-50 Y2 TON ......................... (forged 3685753) ................... 3685755 1 9.5547-50 QL, QV, QW, QX, RL, RV, RW,

RX, SL, SV, SW, SX, TL, TV, (forged 3685895) (use w/3683214 frgd.TW, TX, TY .................. on "I" beam).................... 3685891 1 15.45

47-50 COE,47-52 D-D ........................... (forged 3690441) ................... 3690439 1 15.4551-52 /3 TON ........................ (for ed 3694229)) ............................... 3694227 1 11.50

C©-1967Chevrolet Motor DivisionGeneral Motors Corporation 935

6.103

51-52 UTIL. (exc. COE),53-55 SBC, 2 TON (1st Ser.) (exc. COE),53-55 1^/ TON w/H.D. (1st Ser.)........ (forged 3694909) ................... 3694909 1 16.5051-55 COE,53-55 D-D (1st Ser.) .................. (forged 3694921) ................... 3694921 1 12.3553-55 1/

2 TON (1st Ser.) ................ (forged 3699683) ................... 3699681 1 10.7553-55 '/ 1, 1^/ TON (1st Ser.) (exc. D-D, (forged 3694907-3685897)SBC, H.D.).......... (w/tapered hole) ................. 3694907 1 8.3555-59 !Z TON (2nd Ser.) (exc. 4/WD) .... (forged 3755047) ................... 3755045 1 10.9555-57 D-D (2nd Ser.),

58-59 D-D w/8-19.5-6, 8-19.5-8 tires,60-63 Ser. 30 (D-D),63 Ser. 20 (D-D) w/7.00-17-6 or 8-ply

tire or 7.50-17-8 ply tire ....... single taper (forged 3728437) ........ 3728437 1 15.6555-59 3/4 , 1 TON (2nd Ser.) (exc. D-D).... single taper (forged 3728383) ........ 3728383 1 9.9558-59 Ser. 3 (D-D) w/7 x 17.5, 8 x 17.5tires,

60-62 Ser. 20 (D-D),63 Ser. 20 (D-D) (exc. 7.00-17-6 or 8

ply tire or 7.50-17-8 ply tire) ... (forged 3739911) ................... 3739911 1 14.0064-67 Ser. 20 (D-D) (exc. 7.00-17-6 or 8

ply tire or 7.50-17-8 ply tire).... (forged 3843321) ................... 3843321 1 13.3564-67 Ser. 20-30 (D-D) w/7.00-17-6 or 8ply, 7.50-17-8 ply tire .......... (forged 3857403) ................... 3857403 1 15.7564 -66 G-10 ........................... (forged 3833431) ................... 3833431 1 10.2567-68 G-10 ........................... (forged 3892507) ................... 3892507 1 14.7567-68 G-20 ........................... (forged 3889571) ................... 3889571 1 15.7567 PASS . ......................... left (forged 3 90

9785)................ 3909785 1 5.5067 PASS .......................... right (forged 3909786)............... 3909786 1 5.5055 " TON (2nd Ser.) ................ KIT, steering linkage ................. 3732311* 1 (6.870)55 3/4, 1 TON (2nd Ser.) (exc. D-D).... KIT, steering linkage ................. 3732307* 1 (6.870)55 D-D (2nd Ser.) .................. KIT, steering linkage ................. 3732301* 1 (6.870)

*NOTE: Required for early 1955 2nd Ser. models having double taper assemblydetail. Consists of 1 strg. and 3rd arm, 1 pitman arm, and 1 rod assy.

6.104 NUT-BUSHING-BOLT, Steering Knuckle Arm

38 HA ............................ (3/4.16)........................... 374427 2 .3039-46 W, Y, M, 0, COE w/H.D. (exc. WA, ( -16, slotted) (use w/3100K-193-MY, OW, PP, PR, PS) ......... 18776 forged on "I" beam) ........ 315070 2 .4065 Ser. 20-30 (exc. D-D, 4/WD) ...... (/6-18) (301M) .................... 274638 A.R.(8.917)57-59 ALL w/4/WD ................... BUSHING, third arm at support end ..... 2124231 2 .1860-62 Ser. 20 (4/WD) .................. BUSHING, third arm at support end

63-66 Ser. 10-20 (4/WD) (1st design) .... (Dana 31505) ...................... 2403675 4 .2566-68 Ser. 10-20 (4/WD) (2nd design) .... BUSHING, third arm .................. 2499921 4 .2560-62 Ser. 10 (exc. 4/WD, D-D) ......... BOLT, attaching (^/-20 x 2'/) (300-Msteel) ............................. 3787657 4 .2560-62 Ser. 20-30 (exc. 4/WD, D-D) ...... BOLT, attaching (% 6 -18 x 2^/) (300-Msteel) ............................. 3787658 4 .3063-68 Ser. 20-30 (exc. D-D, 4/WD),

68 Ser. 20-30 (D-D) ................. BOLT (% b -18 x 25/6).................. 3823255 4 .3063-68 Ser. 10 (exc. 4/WD) .............. BOLT (1, -20 x 2) ................... 3818706 4 .2063 Ser. 20 (4/WD) .................. BOLT, attaching ( 3/s -24 x 1 Y ) ......... 3777827 2 .1063-68 CORVETTE .................... BOLT, shock absorber relay rod bracket,

upper end (/ 6-20 x 2Y4 ) ............. 3815933 2 (0.662)67 PASS. w/disc brakes ............ BOLT, strg. knuckle arm short bolt('/-20 x 2/) ....................... 3898027 1 .2568 PASS . ......................... BOLT, strg. knuckle arm short bolt ..... 1381743 A.R. .35Not required in this group. See

Group 6.234 .................... BOLT .............................. 3777828 .10

6.108 STUD, Steering Knuckle Arm Ball

39 COE,40-46 W, Y, M, 0 w/H.D ...............60-62 4/WD ..........................

(use w/3100K-193-18776 forged on"I" beam) ( %-16 x 2'/) ........... 094602 1 2.45

6.103-6.108©-1967

936Chevrolet Motor Division


.10

.05

.05

.05

.05

.05

152020

5.755.957.358.80

7.70

7.057.70

2.75

.75

7.90

8.50

6.111 SEAL, Tie Rod Dust

39-64 PASS., CORVETTE (exc. JB, KB),60-62 Ser. 10 (exc. D-D, 4/WD),60-62 4/WD,61-62 Ser. 10 (D-D),63 Ser. 20 (4/WD),64-66 4/WD ..........................55-59 D-D (2nd Ser.),60 Ser. 30 (D-D),61-63 Ser. 20-30 (D-D) ................63-68 Ser. 10, G-10 (exc. 4/WD),64-68 PASS.,64-68 CORVETTE (exc. P/S),65-66 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 10, (exc. 4/VD) .............65-66 Ser. 10-20 (4/WD),65-66 D-D, G-10 (exc. 102 W.B.),67-68 Ser. 20-30,67-68 Ser. 10 (4/WD), G-10-20 ..........67 Ser. 10 (4 /WD),68 Ser. 20 (4/WD) ..................

socket ( 11,4 O.D.) ................... 3687643 A.R. .10

socket(2 O.D.) .................... 3715892 2 .15

socket ( l/ I.D. x 1 35/64 O.D.) .......... 3826598 2 .10

strg. Conn, rod ball stud ............. 3854823 A.R .10

socket (Dana 34562) ................ 3910209 2 .65

6.163 RETAINER—SHIM—SPACER, Steering Knuckle Upper Control Arm

55-68 PASS.,63-68 CORVETTE .................... bushing (small hole '/e I.D.) .......... 3710586 455-64 PASS.,63-68 CORVETTE .................... SHIM ( '/,6) 3751282 A.R.60-68 Ser. 10 (exc. 4 /WD),60-62 Ser. 20 (exc. 4/WD, D-D)......... SHIM ( Y Z thk.) ( 15

4 , wide at slot)....... 3762961 A.R.60-62 Ser. 30 (exc. D-D) ............... SHIM ('/ 2 thk.) (

17/33 wide at slot) ....... 3762980 A.R.

63-68 Ser. 20-30 (exc. 4/WD, D-D) ...... SHIM ............................... 3795464 A.R.Not required in this group. Seegroup1 2.840 .................... SHIM ............................... 3772594

60-66 Ser. 10 (exc. 4/WD),60-68 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 20-30 (D-D) ................. SPACER (11,4 x 1V2) , , , , , , , , , , , , , , , , , , , 3771317 A.R.63-68 Ser. 10 (exc. 4/WD) .............. SPACER, bracket .................... 3818676 463-68 Ser. 10 (exc. 4/WD) , , , , , , , , , , , , , , SPACER ............................ 3818687 4

6.164 SHAFT UNIT—BOLT UNIT—STUD UNIT—BUSHING—PIN UNIT,Steering Knuckle Upper Control Arm

49-54 PASS . ......................... inner (.008 oversize thds.53-62 CORVETTE .................... on shaft) ........................ 3693693* 2

*NOTE: Consists of 2 bshgs., 1 shaft, 2 bshg. seals. Shaft identified by crossshaped indentation or circular "V" shaped groove with a 'Nadia.punch mark in center on end of shaft.

55-57 PASS . ......................... .................................... 3713902t 258-64 PASS . ......................... .. ............................... 3828299t A.R.60-62 Ser. 10-20 ...................... (9'/B O. L.) ......................... 3845624 160-62 Ser. 30 (exc. D-D) ............... .................................... 3845626 1

tNOTE: Consists of 1 shaft, 2 bushings, 2 retainers, 2 washers, 2 bolts.63-67 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) ................. .................................... 3846351 263-68 CORVETTE,65-68 PASS . ......................... .................................... 3845244 263-67 Ser. 10 (exc. 4/WD) .............. .................................... 3846345 249-54 PASS.,53-62 CORVETTE .................... BOLT UNIT, pivot outer .............. 3755752** 2

*NOTE: Consists of 2 bushings, 1 bolt, and 2 bushing seals.55-56 PASS . ......................... BOLT UNIT, ball stud attaching

(°/ 6 -24 x '/B) ....................... 3719018# A.R.#NOTE: Consists of 4 bolts (300M steel), 4 nuts, 4 washers.

58-66 TAXI, POLICE (1st design) ...... STUD UNIT, ball replacement.......... 3865825 255-67 PASS. (exc. POLICE, TAXI),63-67 CORVETTE .................... STUD UNIT, ball replacement .......... 3865827 2

2.75

C-1967Chevrolet Motor DivisionGeneral Motors Corporation 937

6.111-6.164

60 Ser. 10-20 (exc. D-D, 4/WD)61-62 Ser. 10 (exc. 4/WD),61-62 Ser. 20 (exc. D-D, 4/WD),63 Ser. 20-30 (exc. D-D, 4/WD) ...... STUD UNIT, ball stud replacement .... 3843240e 2 6.40

®NOTE: Consists of 1 stud assy., 1 seal, 4 bolts, 6 nuts, 1 pin, and 4 washers.60 .62 Ser. 30 ......................... STUD'UNIT, ball stud replacement ..... 3769360§ 2 9.75

§NOTE: Consists of 1 stud assy., 1 cover, 1 seal, 4 bolts, 5 nuts, 1 pin, and4 washers.

63-68 Ser. 10 (exc. 4/WD) .............. STUD UNIT, ball replacement .......... 3846343 2 6.7064-67 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 20-30 (D-D) ................. STUD UNIT, ball replacement.......... 3846347 2 7.2066-67 TAXI, POLICE (2nd design),68 POLICE ....................... STUD UNIT, ball replacement.......... 3912097 2 7.9055-68 PASS.,63-68 CORVETTE .................... BUSHING (1

1/2 O.D. x lY O,L,) ......... 3711826 4 .8560 Ser. 10-20 (exc. D-D, 4/WD),61-62 Ser. 10 (exc. 4/WD),61-62 Ser. 20 (exc. D-D, 4/WD),63-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring BUSHING . ......................... 3842898± 4 .98

#NOTE: When using on 1960 thru 1963 models, 3842890 seal and 9417901fitting must also be used.

60-62 Ser. 30 (exc. D-D) ............... BUSHING (1% O.D. x 1flY,, O.L.)........ 3842896♦ 4 (6.1701♦NOTE: Use seal 3842883 and fitting 9417901 with bushing 3842896.

63 Ser. 10 (exc. 4/WD) .............. BUSHING (1% O.D. x 15/ 6 I.D.) ......... 3818683 4 1.05

64-68 Ser. 10 (exc. 4/WD) .............. BUSHING ........................... 3842881 4 .9539-48 PASS. (exc. JB, KB) ............. PIN UNIT, pivot..................... 603412A 2 2.50(NOTE: Consists of 1 front and rear bushing, 1 pin and 2 bushing seals.NOTE: On late production assys. with untapped lubrication fitting holes, it is

necessary to use self tapping lube fittings or tap new threads forstandard type lube fittings.

6.166 SEAL-SEAL ASSY.-FITTING, Steering Knuckle, Upper and Lower Control Arm

39-48 PASS. (exc. JB, KB) ............. lower shaft bushing,49-54 PASS.,53-62 CORVETTE .................... upper and lower shaft bushing........ 599180 A.R. .1039-48 PASS. (exc. JB, KB) ............. upper pivot bolt bushing............. 599191 4 .1539-54 PASS. (exc. JB, KB),53-62 CORVETTE .................... lower pivot bolt bushing............. 599199 4 .1049-54 PASS.,53-62 CORVETTE .................... upper pivot bolt bushing............. 3687699 4 .1057 PASS .......................... lower ball stud..................... 761404 2 .4558-62 PASS.,63-68 POLICE, TAXI ................. lower ball stud, inner ............... 3861869 2 .2558-62 PASS.,63-68 POLICE, TAXI ................. lower ball stud, outer ............... 762599 2 .2560-62 Ser. 10-20,63-64 Ser. 20-30 (exc. 4/WD, D-D) ...... upr. ball stud ...................... 3763211 2 .3060-62 Ser. 10-20 ...................... lower ball stud..................... 767061 2 .4560-62 Ser. 10-20,63 Ser. 20-30 (exc. 4/WD, D-D) ...... upr. bushing ....................... 3762959 4 .1060-62 Ser. 30 ......................... upr. ball stud ...................... 3763212 2 .2560-62 Ser. 30 ......................... lower ball stud..................... 767101 2 .4560-62 Ser. 10-20 ...................... lower bushing,60-62 Ser. 30,63 Ser. 10 (exc. 4/WD),63 Ser. 20-30 (exc. 4/WD, D-D) ....., upr. bushing ....................... 3762960 4 .1060-62 Ser. 30 ......................... lower bushing...................... 3762974 4 .1063 PASS., CORVETTE,63-68 POLICE, TAXI .. upr. ball stud ...................... 770982 2 .4563 Ser. 10 (exc. 4/WD)........... upper bushing ...................... 3818684 4 .1063-64 Ser. 10 (exc. 4/WD) .............. upper ball......................... 3825102 2 .3063-64 Ser. 10 (exc. 4/WD) .............. lower ball stud..................... 3825103 2 .3563 Ser. 20-30 (exc. 4/WD, D-D) ...... lower ball stud ..................... 3838170 2 .2564-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring upper bushing ...................... 3842890 4 .1564-67 Ser. 10 (exc. 4/WD) .............. upper bushing...................... 3842874 4 .15

6. 164-6.166 ©-1967Chevrolet Motor Division


64-67 Ser. 10 (exc. 4/WD),64-67 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 20-30 w/H.D. frt. spring...... lower bushing ...................... 3842883 4 .1555-56 PASS . ......................... SEAL ASSY., lower ball stud........... 3710240 2 .4555-62 PASS.,63 PASS., CORVETTE ............. SEAL ASSY., upper ball stud (1°4 4 x64-68 TAXI, POLICE ................ 11/4 x 2Y64) ........................ 770982 2 .4549-54 PASS.,53-62 CORVETTE .................... FITTING, upr. shaft rr. bshg. lub. (90°) . 9411019 2 .1257 PASS .......................... FITTING, upper and lower lub.

(type C or D 90°) ................... 9417903 A.R.(8.984)

6.168 ARM-ARM ASSY. -STRUT, Steering Knuckle Upper and Lower Control

39-48 PASS. (exc. JB, KB) ............. left (drilled for lower control armbumper 3661888-see SMD 461)(forged 3653905) ................. 605661 1 14.10

39-48 PASS. (exc. JB, KB) ............. right (drilled for lower control armbumper) (forged 3653906) .......... 605662 1 14.10

49-54 PASS.,53-62 CORVETTE .................... upper (threaded type) ............... 3692170 2 4.4855-57 PASS . ......................... left, lower......................... 3741021 § 1 13.9555-57 PASS . ......................... right, lower........................ 3741022§ 1 13.9555-57 PASS . ......................... left, upper......................... 3733809§ 1 11.3055-57 PASS . ......................... right, upper........................ 3733810§ 1 11.3058 PASS. w/Air/S ................. left,lower......................... 3749297§ 1 13.4558 PASS. w/Air/S ................. right,lower........................ 3749298§ 1 13.4559 PASS. W/Air/S .................. left, lower......................... 3764449§ 1 13.4559 PASS. w/Air/S .................. right,lower........................ 3764450§ 1 13.4549-54 PASS.,53-62 CORVETTE .................... ARM ASSY., left, lower (threaded type) .. 3708197♦ 1 10.7549-54 PASS.,53-62 CORVETTE .................... ARM ASSY.,, right, lower (threaded type) . 3693470♦ 1 10.7558-64 PASS. (exc. TAXI, POLICE,

Air/S),62-64 TAXI, POLICE,63-68 CORVETTE .................... ARM ASSY., left, upper ............... 3832349§ 1 11.9558-64 PASS. (exc. TAXI, POLICE,

Air j S ),63-68 CORVETTE .................... ARM ASSY., right, upper .............. 3832350§ 1 11.9558-64 PASS. (exc. TAXI, POLICE)...... ARM ASSY., left, lower ............... 3846267§ 1 15.2558-64 PASS. (exc. TAXI, POLICE,

Air/S) ....................... ARM ASSY., right, lower .............. 3846268§ 1 15.2560-62 Ser. 10-20 ...................... ARM ASSY., left, upper ............... 3857077e 1 18.7560-62 Ser. 10-20 ...................... ARM ASSY., right, upper .............. 38570788 1 18.7560-61 Ser. 10,60-62 Ser. 20 ......................... ARM ASSY., left, lower ............... 37846759 1 54.7560-62 Ser. 30 ......................... ARM ASSY., left, upper .............. 38127559 1 23.2560-62 Ser. 30 ......................... ARM ASSY., right, upper ............. 38127569 1 23.2560-62 Ser. 30 ......................... ARM ASSY., right, lower ( 21

32 shockattaching hole) .................... 37846809 1 61.90

60-62 Ser. 30 ......................... ARM ASSY., left, lower ( 21/32" shockattaching hole) .................... 37846799 1 61.90

60-62 Ser. 10-20 ...................... ARM ASSY., right, lower .............. 37846769 1 54.7558-61 TAXI,62-64 TAXI, POLICE ................. ARM ASSY., right, upper............... 3819064§ 1 10.6558-62 TAXI,63-64 TAXI, POLICE ................. ARMASSY., left, lower................ 3819061§ 1 19.0058-62 TAXI,63-64 TAXI, POLICE ................. ARM ASSY., right, lower............... 3819062§ 1 19.0063-67 CORVETTE .................... ARM ASSY., lower left ............... 3849393 1 16.9563-67 CORVETTE .................... ARM ASSY., lower right ............... 38493941 1 16.9563-68 Ser, 10 (exc. 4/WD) .............. ARM ASSY., upper left ................ 38428759 1 19.2563-68 Ser. 10 (exc. 4WD) .............. ARM ASSY., upper right .............. 38428768 1 19.2563-66 Ser. 10 (exc. 4/WD) .............. ARM ASSY., lower, right .............. 3860864* 1 37.7563-68 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 20-30 (D-D) w /FI.D. frt. spring ARM ASSY., upper left ............... 38428918 1 19.2563-68 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 20-30 (D-D) w/H.D. frt. spring ARM ASSY., upper right ............... 38428928 1 19.2563-64 Ser. 20-30 (1st design) (exc.

4/WD, D-D) ................... ARM ASSY., lower, left .............. 38428938 1 43.75?-196

6.16 -6.168Chevrolet Motor DivisionGeneral Motors Corporation 939

63-64 Ser. 20-30 (1st design) (exc4/WD, D-D) ............ . . .. . . . ARM ASSY., lower, right ............. 3842894e 1 43.75

64-66 Ser. 20-30 (exc. D-D, 4/WD) . , , , . , ARM ASSY., lower left ................ 3860869* 1 43.7564-66 Ser. 20-30 (exc. D-D, 4/WD) , , , , , , ARM ASSY., lower right ............... 3860870* 1 43.7563-66 Ser. 10 (exc. 4/WD) .............. ARM ASSY., lower left ................ 3860863* 1 37.75*NOTE: Drill stabilizing bracket holes as required.

65 TAXI, POLICE ................. ARM ASSY., lower left w/ball stud...... 3865817 1 19.0066-68 TAXI, POLICE ................. ARM ASSY., lower left w/ball stud ..... 3918839 1 19.0065-68 TAXI, POLICE ................. ARM ASSY., lower right w/ball stud .... 3918840 1 19.0065-66 TAXI, POLICE (1st design) ...... ARM ASSY., upper left w/ball stud ..... 3865823 1 10.6565-68 TAXI, POLICE ................. ARM ASSY., upper right ............... 3912096 1 10.8565-68 PASS. (exc. TAXI, POLICE) ...... ARM ASSY., lower left w/ball stud ..... 3881577 1 14.7565-68 PASS. (exc. TAXI, POLICE) ..... ARM ASSY., lower right w/ball stud .... 3881578 1 14.7565-68 PASS. (exc. TAXI, POLICE)...... ARM ASSY., upper left w/ball stud ..... 3865821 1 11.2565-68 PASS. (exc. TAXI, POLICE) ...... ARM ASSY., upper right w/ball stud .... 3865822 1 11.2567-68 Ser. 10 (exc. 4/WD) .............. ARM ASSY., lower right ............... 3892468 1 36.2567-68 Ser. 10 (exc. 4/WD) .............. ARM ASSY., lower left ................ 3892467 1 36.2567-68 Ser. 20-30 (exc. D-D, 4/WD, 11000lb. axle SGL. SPD.),

68 Ser. 20-30 (D-D) w/H.D. frt. spring ARM ASSY., lower right ............... 3892418 1 43.7567-68 Ser. 20-30 (exc. D-D, 4/WD, 11000lb. axle SGL. SPD.),

68 Ser. 20-30 (D-D) w/H.D. frt. spring ARM ASSY., lower left ................ 3892417 1 43.7567-68 Ser. 30 (CONY,) w/11000 lb.axleSGL. SPD . ............... ARM ASSY., lower right ............... 3906520 1 32.5067-68 Ser. 30 (CONY.) w/11000 lb. axleSGL. SPD . ................... ARM ASSY., lower left ................ 3906519 1 32.5066-68 TAXI, POLICE (2nd design) ...... ARM ASSY., upper left ................ 3912095 1 10.8565-66 PASS.,

67 PASS. (1st design) .............. STRUT, lower left .................... 3908715 1 3.1565-66 PASS.,67 PASS. (1st design) .............. STRUT, lower right................... 3908716 1 3.1567-68 PASS. (2nd design) .............. STRUT, lower left.................... 3925171 1 3.1567-68 PASS. (2nd design) .............. STRUT, lower right ................... 3925172 1 3.15§NOTE: Includes ball stud assy.

®NOTE: Includes ball stud assy. and shaft.ANOTE: Does not include shaft.

6.169 SHAFT ASSEMBLY-SHAFT UNIT, Steering Knuckle Lower Control Arm

39-48 PASS. (exc. JB, KB) ............. left (forged 3653913)............... 605003* 1 8.4039-48 PASS. (exc. JB, KB) ............. right (forged 3653914).............. 605004* 1 8.4049-54 PASS .......................... (forged 3691468) (use53-55 CORVETTE .................... w/threaded reinforcement) ......... 3693459* 2 8.4556-62 CORVETTE .................... (forged 3691468) (daub of yellow paint) 3737597* 2 8.4555-57 PASS . ......................... SHAFT UNIT, left (forged 3709983).... 3713903# 1 8.4555-57 PASS .......................... SHAFT UNIT, right (forged 3709984).... 3713904# 1 8.4558-64 PASS,,63-68 CORVETTE .................... SHAFT UNIT (forged 3738505). , .. , , ... 3749296s 2 8.2.560-62 Ser. 30 ......................... SHAFT UNIT, left.................... 3845283* 1 12.8060-62 Ser. 30 ......................... SHAFT UNIT, right................... 3845284* 1 12.8060-62 Ser. 10-20 (exc. 4/WD, D-D),62 Ser. 10 (D-D),63-66 Ser. 20-30 (exc. 4/WD, D-D) , , , , , , SHAFT UNIT, left .................... 3846349* 1 13.4060-62 Ser. 10-20 (exc. 3/WD, D-D),62 Ser. 10 (D-D),63-66 Ser. 20-30 (exc. 4/WD, D-D) ...... SHAFT UNIT, right ................... 3846350* 1 13.4063-66 Ser. 10 (exc. 4/WD) .............. SHAFT UNIT........................ 3846346* 2 8.4567 Ser. 10 (exc. 4/WD),67 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring SHAFT UNIT ........................ 3901038 2 S.45*NOTE: Consists of 1 shaft, 2 bshgs. and2 seals.

#NOTE: Consists of 1 shaft, 2 bushings, 2 retainers, 2 bolts, 2 washers

6.168-6.169©-1967

940

Chevrolet Motor Division


6.170 BUSHING-BUSHING UNIT-RETAINER-SLEEVE-CAP, Steering KnuckleLower Control Arm Shaft

49-54 PASS.,53-62 CORVETTE .................... (use w/threaded mfct.).............. 3691454 4 7555-64 PASS.,63-68 CORVETTE ................... (113/^6 O.D. x 2 3/, 2 O.L.) .............. 3714368 4 .7560 Ser. 10-20 (exc. D-D, 4/WD),61-62 Ser. 10 (exc. 4/WD),

61-62 Ser. 20 (exc. D-D, 4/WD),63-66 Ser. 20-30 (exc. D-D, 4/WD) ..... , (15/e O.D. x 1'

1/i b O.L.) ............... 3842896 4 1.3560-62 Ser. 30 ......................... (1'/8 O.D. x 2 O.L.) ................. 3762973 4 1.55

63 Ser. 10 (exc. 4/WD) .............. .................................... 3818698 4 1.20

64-67 Ser. 10 (exc. 4/WD),68 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring .................................... 3842882 4 1.2065-66 PASS.,67 Ser. 20-30 (exc. D-D, 4/WD) ....... .................................... 3857199 2 1.32

67-68 PASS. (exc. POLICE) ............ .................................... 3913462 2 1.40

67-68 POLICE ....................... .................................... 3913471 2 1.75

65-68 PASS . ......................... BUSHING UNIT, s trut................. 3869193 2 .6667 POLICE ....................... BUSHING UNIT, strut ................. 3916068 155-64 PASS . ......................... RETAINER, lower arm bushing ('/,, I.D.63-68 CORVETTE .................... x 1"/, b O.D.) ....................... 3714369 4 .1065-68 PASS . ......................... RETAINER, lower arm strut ( 3/4 I.D. x

2 4 O.D.) ....................... 3857443 4 .1565-68 PASS . ......................... SLEEVE, strut bshg. ( 29/32 I.D. x

1 2 1/ O.D.) ......................... 3857444 2 .1065 -66 PASS . ......................... CAP, bushing ........................ 3884879 4 .1567-68 PASS . ......................... CAP, bushing........................ 3913461 2 .15

Not required in this group. Seegroup5.418 ................... CAP................................ 3791519 .05

6.172 BOLT-NUT-WASHER-CAM, Steering Knuckle Lower Control Arm Attaching

39 JA ............................ front('/6-20 x 2).................. 3693612 4 (5.002)40-62 PASS., CORVETTE (exc. KB),63 -64 PASS . ......................... ('/6-20 x 1^/) (300-M steel) .......... 3707480 A.R. .1255-57 PASS.......................... ('/6-20 x 1'/8 ) ..................... 3707481 4 .1555-64 PASS.,60-62 Ser. 10-20 ..................... ( -20 x 1'/)..................... 454972 4 (8.900)58-64 PASS.,63-67 CORVETTE ................... ( -18 x 2 5/ 6 ) (300-M steel) ......... 3779097 2 .3060-66 Ser. 10-20 ..................... (1 _20 x 1'/4) (300-M steel)........... 2400941 8 (5.812)60 -62 Ser. 30 ........................ ( _18 x 1 4)..................... 455092 8 (8.900)63-68 Ser. 10 (exc. 4/WD) .............. "U ", arm assy..................... 3818699 4 .3065-68 PASS . ......................... lower (

7/ 6 x 20 x 1°/ 6 ) ............... 3859094 2 .05

65-68 PASS . ......................... lower (7/ 6 x 20 x 1 3/4 ) ................ 3859095 2 .30

67-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring "U", lower ........................ 3892421 4 .5058-64 PASS.,63-67 CORVETTE .................... NUT, ('/ 6-20) (2 holes, 2 1/2 long) ....... 3742249 2 .4060-64 Ser. 10 thru 30,63-67 PASS., CORVETTE ............. NUT ( 3/8 -24) ......................... 3866766 A.R. (0.626)60-64 PASS.,63 -65 Ser. 10 (exc. 4/WD) .............. NUT ('/ 6 -14) ........................ 3818702 8 (6.178)ALL ALL ........................... NUT (/ 6 -20) (lower control arm) ....... 3722853 A.R. .1060 Ser. 10-20 ...................... NUT, (1'4 -20) (301-M steel)63 Ser. 20-30 (exc. 4/WD, D-D) ...... (copper flash) ...................... 9417614 A.R.(8.915)

65-68 PASS . ......................... NUT, adjusting cam .................. 3857205 2 .2566 PASS . ......................... NUT, strg. knuckle lower control arm rr.

(, -l8) ........................... 9422304 A.R.(8.917)

66 PASS . ......................... NUT, rr. susp. lower control arm,( %-18) (301M) ..................... 9422306 A.R.(8.917)

ALL ALL .......................... NUT, (°/ b -18) (301-M steel) .......... 3742251 2 .15ALL ALL ........................... NUT, '/-13 .......................... 9422301 A.R.(8.917)

Not required in this group. SeeGroup6.178 .................. NUT................................ 9422302 (8.917)

63-68 CORVETTE .................... WASHER, ( 3 4) .. • • • • • • • • • • • • • • • • • • • • • 3779096 2 .10

-19676.170-6.172Chevrolet Motor Division

General Motors Corporation 941

65-67 PASS. (1st design) .............. CAM, lower adjusting (6 7/^ O.L.) ....... 3857201 2 .9265-68 PASS . ......................... CAM, outer adjusting ................. 3913474* 2 .2067-68 PASS. (2nd design) .............. CAM, lcwer adjusting ................. 3913473** 2 1.15*NOTE: '/2 dia. "O" stamped on face.

**NOTE: Threaded length is '/4 longer than 3857201.Not required in this group. See

Group5.417 .................. CAM................................ 3790331 .15

6.174 BOLT UNIT—BOLT—BOLT ASSY.—STUD UNIT—STUD ASSY.—NUT—WASHER,Steering Knuckle Lower Control Arm Pivot

39-48 PASS. (exc. JB, KB) ............. replacement ....................... 603406§ 2 2.15

§NOTE: Consists of 1 bushing, 2 seals, and 1 bolt.49-54 PASS.,53-62 CORVETTE .................... replacement ...................... 3690683 2 2.35

®NOTE: Consists of 1 bushing, 2 seals, 1 bolt, and 1 nut.55-56 PASS . ......................... ball stud top attach. ( 5/ 6 -24 x '/)..... 3719018# A.R.(6.164)

#NOTE: Consists of 4 bolts (300M steel), 4 nuts, 4 washers.55-57 PASS . ......................... ball stud side attach. ( 5/ 6 -24 x 2 1/) .. 3720181T 2 .30

tNOTE: Consists of 2 bolts (300M steel), 2 nuts, 2 washers.65-67 PASS . ......................... BOLT (, x 24 x 1%) ................. 3882954 2 .3060-62 Ser. 10 thru 3.0 .................. BOLT ASSY., lower control ball stud

( Y-13 x 2) ....................... 3762977 2 .4555-57 PASS . ......................... STUD UNIT, lower ball replacement .... 3739959* 2 8.45*NOTE: Consists of 1 stud assy., 1 seal assy., 6 bolts, 2 pins, 12 washers, 8 nuts.

58-67 PASS. (exc. TAXI, POLICE),63-67 CORVETTE (1st design) ......... STUD UNIT, lower ball replacement .... 3886422 2 8,7058-67 TAXI, POLICE ................. STUD UNIT, lower ball replacement .... 3886420 2 8.4460-62 Ser. 10-20 ...................... STUD UNIT, lower ball replacement .... 3789786tt 2 14.35ttNOTE: Consists of 1 stud assy., 1 seal, 2 bolts, 3 nuts, 1 pin, and 3 washers.60-62 Ser. 30 ......................... STUD UNIT, lower ball replacement .... 3789788** 2 15.15

*NOTE: Consists of 1 stud assy., 1 seal, 2 bolts, 3 nuts, 1 pin, and 2 washers.63-64 Ser. 20-30 (1st design) (exc. 4/WD,

D-D) ......................... STUD UNIT, lower ball replacement .... 3829440 2 9.4563-68 Ser. 10 (exc. 4/WD) .............. STUD ASSY.......................... 5678914 2 6.2564-66 Ser. 20-30 (2nd design) (exc.4/WD, D-D) ................... STUD ASSY. w/attached seal .......... 9741795 2 10.95

67-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring STUD ASSY .......................... 9745180 2 10.9549-54 PASS.,53-62 CORVETTE .................... NUT, lock (3/-11).................... 3687666 2 .1160 Ser. 10 thru 30,61-62 Ser. 30,63-64 Ser. 10 (exc. 4/WD) .............. WASHER, used to attach flange plate63-68 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring and brake assy. (special "/ b ) ........ 3761627 2 .05

NOTE: On late production assy. with untapped lubrication fitting holes. It is necessaryto use self tapping lub. fittings or tap new threads for standard type lube fittings.

6.176 BUMPER—BUMPER ASSY.—SPACER, Steering Knuckle Upper and Lower ControlArm

39-54 PASS. (exc. JB, KB),53-62 CORVETTE .................... upper ............................. 3708834 2 .5339-48 PASS. (exc. JB, KB),53-62 CORVETTE .................... lower (attaches to lwr. spring seat.... 3661888 2 .7249-54 PASS . ......................... lower ............................. 3687669 2 .7255-57 PASS . ......................... lower ............................. 3707108 2 .6755-57 PASS.,63 CORVETTE .................... upper (rubber) ...................... 3722380 2 .5858-68 PASS.,63-68 CORVETTE .................... upper ............................. 3742247 2 .3858-64 PASS.,63-68 CORVETTE .................... lower ............................. 3742252 2 .4560-62 Ser. 10-20-30 ................... lower ............................. 3762981 2 .45

6.172-6.176 c_1967Chevrolet Motor Division


60-62 Ser. 10 thru 30,63-67 Ser. 10 (exc. 4/WD),63-67 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) w/H.D. frt. spring upper ............................. 3773361 2 .4063-64 Ser. 10 (D-D),63-66 Ser. 10 thru 30 (exc. D-D, 4/WD),65 PASS.,67-68 Ser. 10 (exc. 4/WD),67-68 Ser. 20-30 (exc. D-D, 4/WD) ...... lower ............................. 3852039 2 (7.535)67-68 PASS . ......................... BUMPER ASSY., lower (1 x 1'/ x 2 15/ 4 ) .. 3859194 2 .5866 CORVETTE (C.A.C. will/Per.)

(427) ........................ SPACER,lower...................... 3894561 2 1.35

6.177 BRACKET-BRACKET ASSY. - REINFORCEMENT, Steering Knuckle Upperand Lower Control Arm

58 PASS . ......................... lower, right (rear) .................. 3741138* 1 1.3658 PASS . ......................... lower, left (rear) ................... 3748175t 1 1.3658 PASS . ......................... lower, right (rear) .................. 3748176t 1 1,3659-63 PASS. (exc. CONY.),64 TAXI .......................... lower, left (rear) ................... 3754803t 1 1.4059-63 PASS. (exc. CONY.),64 TAXI .......................... lower, right (rear) .................. 3754804t 1 1.4058-60 PASS.,61-64 PASS. (exc. TAXI) .............. lower, left ........................ 3779487 1 1.4659-60 PASS.,61-64 PASS. (exc. TAXI) .............. lower, right ....................... 3779488 1 1.4658-63 PASS. (exc. TAXI) .............. upper, bumper, left ................. 3741135* 1 1.0858-63 PASS. (exc. TAXI) .............. upper, bumper, right ................ 3741136* 1 1.0858-63 PASS. (1st design) (exc. CONY.) .. upper, bumper, left ................. 3742019t 1 1.0858-63 PASS. (1st design) (exc. CONY.) PP P g ................upper, bumper, right 3742020t 1 1.0860-62 Ser. 10-20 ...................... left .............................. 3769417 1 6.7560-62 Ser. 10-20 ...................... right.............................. 3769418 1 6.7560-62 Ser. 30 ........................ left .............................. 3778809 1 6.9060-62 Ser. 30 ........................ right ............................. 3778810 1 6.9058-63 PASS. (exc. CONY.),64 TAXI .......................... upper left ......................... 3775133 1 1.8858-63 PASS. (exc. CONY.),64 TAXI .......................... upper right ........................ 3775134 1 1.8858-60 PASS.,61-64 PASS. (exc. TAXI) .............. upper, left ........................ 3772579* 1 2.3158-60 PASS.,61-64 PASS. (exc. TAXI) .............. upper, right........................ 3772580* 1 2.3163-64 PASS. (2nd design) (exc. TAXI) .. , upper, bumper, left ................. 3832023 1 1.1863-64 PASS. (2nd design) (exc. TAXI) . upper, bumper, right 3832024 1 1.1863 PASS. (2nd design) (exc. CONY.),64 TAXI .......................... upper, bumper, left 3832027 1 1.1863 PASS. (2nd design) (exc. CONY.),64 TAXI .......................... upper, bumper, right 3832028 1 1.1863-65 Ser. 20-30 (exc. 4/WD, D-D) ...... upper left ......................... 3818665 1 6.9063-65 Ser. 20-30 (exc. 4/WD, D-D) ...... upper right ........................ 3818666 1 6.9063-68 Ser. 10 (exc. 4/WD) .............. upper left ......................... 3818671 1 6.4563-68 Ser. 10 (exc. 4/WD) .............. upper right ........................ 3818672 1 6.4563-66 Ser. 10 (exc. 4/WD) .............. lower left (cross member) ............ 3820721 2 .2563-66 Ser. 10 (exc. 4/WD) .............. lower right (cross member) ........... 3820722 2 .2563-64 CORVETTE .................... upper left ......................... 3819593 1 3.2563-64 CORVETTE .................... upper right ........................ 3819594 1 3,2565-68 PASS. (exc. TAXI, POLICE) ...... lower left ......................... 3855829 1 1.3265-68 PASS. (exc. TAXI, POLICE) ...... lower right ........................ 3855830 1 1.3265-66 TAXI .......................... upper left ......................... 3864777 1 4.9565-66 TAXI .......................... upper right ........................ 3864778 1 4.9567-68 Ser. 10 (exc. 4/WD) .............. left (cross member) ................. 3892413 2 .3567-68 Ser. 10 (exc. 4/WD) .............. right (cross member) ................ 3892414 2 .3568 PASS . ......................... upper left ......................... 3922583 1 2.9568 PASS . ......................... upper right ........................ 3922584 1 2.9565-67 PASS. (exc. TAXI, POLICE)...... BRACKET ASSY., upper left........... 3855823 1 2.9765-67 PASS. (exc. TAXI, POLICE)...... BRACKET ASSY., upper right.......... 3855824 1 2.9758 PASS . ......................... REINFORCEMENT, lower, rr. brkt., right 3749858* 1 4758 PASS . ......................... REINFORCEMENT, lower, rr. brkt., left. 3749859t 1 .4758 PASS . ......................... REINFORCEMENT, lower, rr. brkt., right 3749860T 1 .47

4-1967 6.176-6.177Chevrolet Motor DivisionGeneral Motors Corporation 943

59-63 PASS.,64 TAXI, CONV . .................. REINFORCEMENT, lower, rr. brkt., left. 3755107 1 4759-63 PASS.,64 TAXI, CONV . .................. REINFORCEMENT, lower, rr., brkt., right 3755108 1 .4760-61 Ser. 10 ........................ REINFORCEMENT, upper ............. 3762999 4 .15

*NOTE: Use with 2 piece tunnel bottom plate frame.tNOTE: Use with 1 piece tunnel bottom plate frame.

6.178 BOLT—NUT, Steering Knuckle Upper Control Arm

55-64 PASS.,63-66 CORVETTE (1st design) ........ ( /6-20 x 2%) (300-M steel) .......... 3719947 4 .1566-67 CORVETTE (2nd design)......... ('/6_20 x 2'/4) ...................... 3888248 4 .1560-62 Ser. 30 ........................ (°/,6-18 x 2'/e) (300-M steel) ......... 3763371 4 .3560-62 Ser. 10-20 ..................... ( Y2-20 x 2 53

/64 ) (300-M steel) ......... 3769416 4 .1563-68 Ser. 20-30 (exc. 4/WD, D-D),68 Ser. 20-30 (D-D) w/H.D. frt. spring (°46-18 x 3) ........................ 3818667 4 .2563-68 Ser. 10 (exc. 4/WD) ........... . .. (1i/ -20 x 2/4 ) ....................... 3818675 4 .2567-68 Ser. 10-20 (4/WD),67-68 Ser. 30 w/11000 lb. axle SGL.

SPD. (exc. D-D) .............. ( -13 x 2/4)....................... 3888976 1 .7568 CORVETTE ................... (/ 13 x 2'/4) (300-M steel) .......... 381909 4 .2C60-62 Ser. 10,63-65 Ser. 10, (exc. 4 WD),63-65 Ser. 20-30 (exc. 4/WD, D-D) ...... NUT, lock (Y2 -20) .................... 9422302 A.R.(8.917)60-61 Ser. 10 thru 30,62 Ser. 10-20,63-67 Ser. 20-30 (exc. 4/WD, D-D) ...... NUT (/4 -16) flange plate and bracket... 3823085 A.R. .3566 CORVETTE .................... NUT, rr. susp. lower control arm (

3/e -24). 9422298 A.R.(8.917)66 PASS . .................... .... NUT, rr. susp. upper control arm to axle

hag. and frame bracket, ( 5/8 -18) (301M) 9422306 A.R.(8.917)

66 CORVETTE .................... NUT, strg. knuckle upper control armassy .('/6-20) ..................... 9422300 A.R.(8.917)

66 PASS . ......................... NUT, strg. upper control arm to frontcross member ('/ 6 -14) .............. 9422299 A.R.(8.917)

ALLALL ........................... NUT ('/a-20) (301-M steel) ............ 3722853 A.R. (6.172)ALLALL........................... NUT ('/ 6 -14) (301-M steel)............ 3765425 A.R. .10

6.179 ARM ASSY., Steering Idler and Third

49-54 PASS. (exc. P/S) ............... (forged 3691173) ................... 3691171 1 13,6553-62 CORVETTE .................... (forged 3731801) (daub of yellow paint) 3733215 1 14.65

6.180 SHIM, Steering Idler and Third Arm

49-54 PASS . ......................... (.005 thick .940 I.D. x 15/ 6 O.D.) ..... 3687657 A.R. .0649-54 PASS . ......................... (.0625 thick .940 I.D. x 1

5/ 6 O.D.) .... 3691282 1 .1549-54 PASS . ......................... brkt. to frame (.010 thick "/z I.D. x

1 O.D.) ......................... 3686548 A.R. .0257 CORVETTE .................... bracket to front cross member ........ 3733479 2 .30

6.181 REPAIR UNIT and PARTS, Steering Idler and Third Arm Shaft

49-54 PASS . .........................*NOTE: Consists of 1 Shaft, 1 Pin, 2

....................................Plugs, 2 Seals, 2 Bushings and 4 Shims.

3696372* 1 2.26

53-62 CORVETTE .................... BEARING ASSY. (ND 5506TY 1E) ...... 954839 1 11.2849-54 PASS . ......................... BUSHING (.911 I.D. x 1.046 O.D.) ...... 3691403 2 .2049-54 PASS . ....................... SEAL, bshg. (rubber—V4 thick) ......... 3691423 2 .0653-62 CORVETTE .................... SEAL, bshg. (rubber- 5/ 6 thick) ......... 3706026 1 .2053-62 CORVETTE .................... STUD (3 3

/ 6 long) ..................... 3706041 1 4.0057-62 CORVETTE w/H.D. brake/susp... STUD, ball (21/4 long) ................. 3747591 2 5.9553-62 CORVETTE .................... RING, brg. retainer (type T) ........... 274615 1 (8.934)

6.177-6.181 X-1967Chevrolet Motor Division


6.186 BRACKET ASSY.—PLATE ASSY.—BOLT—LOCK, Steering Idler Third Arm

49-54 PASS . ......................... with bushing ...................... 3691167 1 8.9553-62 CORVETTE .................... (cast 3742688) ..................... 3742688 1 12.2563-68 CORVETTE .................... lever support ...................... 3819289 1 .5357-62 CORVETTE w/H.D. brake/ susp... PLATE ASSY. (fast steering adapter) ... 3747588 1 15.8049-54 PASS . ......................... BOLT, attaching ('/2_20 x 1)........... 217208 1 (8.900)57-62 CORVETTE w/H.D. brake/susp... BOLT, plate assy. (

3/8-24) ............ 2066840 1 (5.586)

49-54 PASS . ......................... LOCK, bolt ......................... 3691438 1 .10

6.203 PIN—PIN ASSY., King

38-42 UTIL. (exc. COE, MT, MY),46-52 '/a, 1 TON (exc. D-D),46-50 1'2 TON (exc. SBC) ............. (w/lock pin)....................... 363306 2 1.3539-54 PASS. (exc. JB, KB),41-42 COMM.,46-59 '/i TON,53-62 CORVETTE .................... (5% O.L.) 599207 2 1.4653-55 3/a, 1, 1'/z TON (1st Ser.) (exc.

D-D, SBC)) .............. pin) (55'8 O.L.)(w/lock r,n ............. 3703496 2 1651.6555-59 'z TON (2nd Ser.) ............... (w/lock pin)....................... 3718103 2 1.7055-59 3

/4 , 1 TON (2nd Ser.) (exc. D-D,SBCH.D.) .................... (w/lock pin)....................... 3711195 2 1.70

64-68 G-10 ........................... (5% O.L. x 53164 dia.) ................ 3833412 2 1.15

67 G-20 ........................... .................................... 3889545 2 5.7562-68 Ser. 20 (4/WD) w/H.D. ........... PIN ASSY. w/brg. retainer (Dana 2138X) 3821030 1 16.50

KING PIN REPLACEMENT UNITS

Following replacement units include 2 king pins, 2 lock pins, 4 knuckle bushings, 4 knuckleplugs, 2 thrust bearings, 4 thrust bearing shims (also plug covers and lock rings where used).

38-39 CORM . ........................ .................................... 602691 1 5.9538-42 UTIL. (exc. COE, MT, MY),46-52 %, 1 TON (exc. D-D),46-50 1 1

2 TON (exc. SBC) .............. .................................... 601019 1 7.1038-42 UTIL. (exc. COE, MT, MY),46-52 ',;, 1 TON (exc. D-D),46-50 1'2 TON (exc. SBC) ............. (.010 O.S.) ........................ 603538 1 7.1038-42 UTIL. (exc. COE, MT, MY),46-52 %„ 1 TON (exc. D-D),46-50 1 1

,2 TON (exc. SBC) ............. (.020 O.S.) ........................ 604254 1 7.2538-40 GB, HB, JB, KB, KC, KD, KE, KF .................................... 602690 1 7.0039-54 PASS. (exc. JB, KB),53-62 CORVETTE .................... .................................... 603386 1 6.9541-42 COMM.,46-55 '2 TON (1st Ser.) ................ .................................... 605121 1 7.5039-42 MT, MY, COE (Reg. Prod.),40-46 WA, WB, WC, YR, YS, YT, MR,

MS, OR, OS w/H.D.,46 OE, OF, OG, OH, 01, OJ, OW, OY,

PL, PV, PW, PX (Reg. Prod.)... (6/4 lg.-1Y8 O.D. uses snap ring) ..... 608841 1 14.2541-42 COMM.,46-55 'z TON (1st Ser.) ................ (.010 O.S.) ........................ 609882 1 7.2546-55 2-TON (1st Ser.),46-63 UJ, UK, VJ, VK, SBC, D-D (exc.

102 W.B.),48-55 1

1TON w/H.D. (1st Ser.),

64 D-D (exc. 102 W.B.) (1st design) .. .................................... 3854744 1 10.9546-55 2-TON (1st Ser.),46-63 UJ, UK, VJ, VK, SBC, D-D

(exc. 102 W.B.),48-55 1' 2 TON w,'H.D. (1st Ser.),54-64 D-D (exc. 102 W.B.) (1st design) .. (.010 O.S.) (bronze bushings) ........ 3854745 1 10.9546-55 2-TON (1st Ser,),46-63 UJ, UK, VJ, VK, SBC, D-D (exc.

102 W.B.),48-55 1'/z TON w/H.D. (1st Ser.),64 D-D (exc. 102 W.B.) (1st design).. (.020 O.S.) ........................ 3854746 1 10.955355 %, 1, 1 TON (1st Ser.) (exc. D-D,

SBC, H.D.) ................... (king pin 5% ig. x O.D.).......... 3704112 1 7.25

C-19676.186-6.203Chevrolet Motor Division


53-55 ?;, 1, 1 12 TON (1st ser.) (exc. D-D,

SBC, H.D.) ................... (.010 O.S.) ........................ 3705549 1 7.2553-55 3 ,, 1, 1?z TON (1st Ser.) (exc. D-D,

SBC, H.D.) ................... (.020 O.S.) ........................ 3705553 1 7.2555-59 1

2 TON (2nd Ser.) ................ (.010 O.S.),,,,.,.,,,,,,,,,,,,,,,,, 3755236 1 9.50

55-59 34 i 1 TON (2nd Ser.) (exc. D-D,SBC, H.D.) ................... .................................... 3854008 1 7.95

55-59 ?, 1 TON (2nd Ser.) (exc. D-D,SBC, H.D.) ................... (.010 O.S.) ........................ 3720694 1 7.95

55-59 , 1 TON (2nd Ser.) (exc. D-D,SBC, H.D.) ................... (.020 O.S.) ........................ 3854010 1 7.95

55-59 ',2 TON (2nd Ser.) ................ .................................... 3755235 1 9.5064-67 G-10,. 3854004 1 7.9564-67 D-D (exc. 102 WE.) (2nd design) .. (Delrin bushings) ................... 3858389 1 11.9567 G-20 ........................... .................................... 3921089 1 11.9568 G-10 ........................... .................................... 3928439 1 9.25

6.210 WASHER UNIT-SPACER-SEAL, Spindle and Knuckle Thrust

46-59 D-D, UJ, UK, VJ, VK, SBC,48-55 1'4 TON w/H.D. (1st Ser.),60-64 D-D (1st design) (exc. 102 W.B.)... knuckle washer (fits Std. or O.S.) .... 3695004* 2 1.35

*NOTE: Consists of 1 bronze, 2 steel thrust washers and 2 dust shields.53-55 1',2 TON (1st Ser.)(exc. SBC, H.D.),53-59 '; 1 TON (exc. D-D, H.D.)....... knuckle washer .................... 3850012t 2 7.6055-59 12 TON (2nd Ser.) ................ knuckle washer .................... 3720601t 2 .95

tNOTE: Consists of 1 steel, 2 copper alloy thrust washers, and 2 dust shields.57-59 '2 TON ........................ SPACER, bearing .................... 3755049 2 .4068 G-20 ........................... SEAL,lower......................... 3922654 1 .75

BEARING, King P in Thrust

38-42 UTIL. (exc. COE, MT, MY),46-50 '/4r 1, lY TON (exc. D-D, SBC),51-52 ':,, 1 TON (exc. D-D) ............ .................................... 365309 2 .7038-42 UTIL. (exc. COE, MT, MY),46-50 '/„ 1,14 TON (exc. D-D, SBC),51-52 4, 1 TON (exc. D-D) ............ (.010 O.S.) (part of 603538) .......... 603494 2 .7038-42 UTIL. (exc. COE, MT, MY),46-50 3/4 ,1, 1

1,z TON (exc. D-D, SBC),

51-52 ',4, 1 TON (exc. D-D) ............ (.020 O.S.) (part of 604254) .......... 604244 2 .7038-40 HA, JA, KA, KH,41-54 PASS.,41-55 '/z TON (1st Ser.),53-62 CORVETTE .................... .................................... 373476 2 .6038-40 HA, JA, KA, KH,41-54 PASS.,41-55 '/z TON (1st Ser.),53-59 CORVETTE .................... (.010 O.S.) (part of 609882) .......... 609878 2 .6040-42 UTIL. w/H.D . ...... ......... (use w/frt. axle "I" beams having46-47 2 TON, OW, OY, PL, QL ......... 3681101 or 3100K-193-18776 frgd.). 3678172 2 .7064-68 G-10 ........................... .................................... 3887329 2 .7064-67 D-D (exc. 102 W.B.) (2nd design) .. (2/32 x 5/

e) .......................... 9421435t 2 1.22tNOTE; Use with "I" beam axles 3852517 and 3852518.

67 G-20 ........................... .................................... 3889549 2 1.25

6.214 SHIM, King Pin Thrust Bearing

38-40 DA, EA, FA, GA, HA, JA, KA, KH,41-54 PASS.,41-59 ',z TON,53-62 CORVETTE ....................38-42 UTIL. (exc. COE, MT, MY),46-55 1'2 TON (1st Ser.) (exc. UJ, UK,

VJ, VK, SBC, H.D.) ..........46-59 3

4, 1 TON (exc. D-D, H.D.) .......39-42 UTIL. (exc. VA, VB, VC, VD, WA),46-55 D-D, UJ, UK, VJ, VK, SBC (1st Ser.),48-55 114 TON w/H.D. (1st Ser.),60-67 D-D (exc. 102 W.B.) .............

(.005) ............................. 373481 A.R. .05

(.005) (flat on O.D.) (.020 O.S.) (partof604254) ....................... 3870821 A.R. .05

(.005) (.020 O.S.) (part of 3694970) ... 3870822 A.R. .10

6.203-6.214 C-1967Chevrolet Motor Division


57-59 ALL w/4/WD .................. .60-68 4/WD (exc. H.D.) ................60-68 4/WD (exc. H.D.) ................60-65 4'WD (exc. H.D.) ................66-68 Ser. 10-20 (4/WD) ...............62-68 Ser. 20 (4/WD) w/H.D. .......... .62-68 Ser. 20 (4/WD) w/ H.D. .......... .64-68 G-10 ..........................67 G-20 ...........................

6.216 PIN, King Pin Lock

38-42 UTIL. (exc. COE, MT, MY),46-47 3

/4, 1 TON, UTIL.,48-55 D-D, UTIL. (1st Ser.),55-59 D-D,60-67 D-D (exc. 102 W.B.) .............38-40 HA, JA, KA, KH,41-54 PASS.,53-62 CORVETTE ....................39-42 W, Y, M, COE w/H.D. ...........46 0 .............................41-42 COMM.,46-55 TON (1st Ser.),53-55 %, 1, 11/2 TON (1st Ser.) (exc.

D-D, SBC) ...................55-57 Ser. 3 (2nd Ser.) (exc. D-D, H.D.)..64-68 G-10 ...........................67 Ser. 20 .........................

(.005) ............................ 2367516 A.R. .25(.005) (rectangle shape) (Dana 16992-2) 2403668 A.R. .10(.010) (rectangle shape) (Dana 16992-3) 2403669 A.R. .10(.005) (Dana 31421-2) ............... 2403670 A.R. .10(.005) (Dana 34242-2) ............... 2499924 A.R. .20(.003) (Dana 31005-4) ............... 3820831 A.R. .10(.005) (Dana 31005-1) ............... 3820828 A.R. .10(.005) ............................. 3868778 1 .10(.005) ............................. 3889546 2 .10

(3/8-24 x 2 31

/2 O.L.) ................. 3685179 2 .30

('/e-24 x 1 15/, 6 O.L.) ................ 373455 2 .25

(use w/3100K-193-18776 forged on "P'beam) .......................... 319390 2 .28

(3/8 -24 x 2% O.L.) .................. 3656531 2 .20

('/8 -24 x 2'4 O.L.) .................. 3712914 2 .25('/e -24 x 24 6 O.L.) .................. 3834132 2 .30C/I6 x 1%) .......................... 442872 2 (8.940)

6.223 PLUG-RING-COVER-

SE AL -SEAL ASSY., Knuckle Expansion

38-42 UTIL. (exc. COE, MT, MY),46-55 1' 3 TON (1st Ser.) (exc. UJ, UK,

VJ, VK, SBC, H.D.),46-59 %, 1 TON (exc. D-D, H.D.) ....... .................................... 3653937 4 .0338-40 GA, HB, JB, KB, KC, KD, KE .... .................................... 103894 4 (8.970)39-54 PASS. (exc. JB, KB),53-62 CORVETTE .................... .................................... 599208 4 .0741-42 COMM.,46-59 ';i TON ........................ .................................... 3657337 4 .0746-59 D-D, UJ, UK, VJ, VK, N, P, SBC,48-55 1'z TON w/H.D. (1st Ser.),60-63 D-D (exc. 102 W.B.) ............. (use w/3681101 frgd. on "P' beam) ... 3678195 4 .0739-54 PASS. (exc. JB, KB),53-62 CORVETTE .................... RING, lock .......................... 599209 4 .0739-54 PASS. (exc. JB, KB),53-62 CORVETTE .................... COVER, king pin bearing plug ......... 599210 2 .0764-66 Ser. 20-30 (D-D),67 Ser. 20-30 (D -D) (exc. 11000 lb.

SGL. SPD. rr. axle)............ SEAL, king pin bearing dust ........... 3846915 2 .1064-68 G-10 ........................... SEAL, king pin thrust bearing dust ..... 3846914 2 .1067 G-20 ........................... SEAL, king pin brg. cap............... 3889544 A.R. .1067 G-20 ........................... SEAL ASSY., w/"O" ring, king pin brg. , 3902980 2 1.2568 G-20 ........................... SEAL ASSY., king pin brg. upper ....... 3922653 1

6.225 GASKET-CAP, King Pin Oil

64-66 Ser. 20-30 (D-D),67 Ser. 20-30 (D-D) (exc. 11000 lb.

SGL. SPD. rr. axle)............ cap ............................... 3818886 4 .0564-68 G-10 ........................... cap, upper and lower................ 3833409 A.R. .0564-66 Ser. 20-30 (D-D),67 Ser. 20-30 (D-D) (exc. 11000 lb.

SGL. SPD. rr. axle)............ CAP (2" I.D. x Y 6 thick) .............. 3818885 4 .0564-68 G-10 ........................... CAP, king pin brg., lower and upper .... 3833408 2 .0567-68 G-20 ........................... CAP, king pin brg., lower and upper .... 3889543 A.R. .10

`_196 6.21 -6.225Chevrolet Motor DivisionGeneral Motors Corporation 947

6.230 ROD, Front Axle Tie

38-42 COMM.,46-55 l2 '/4 TON (1st Ser.) (exc. D-D).... (43'/6 O.L.) ( 3

/-16 thread)........... 367528 1 3.2038-42 UTIL. (exc. MT, MY, COE),46-55 1, 1Y TON (1st Ser.) (exc. D-D,

UJ, UK, VJ, VK, SBC, H.D.) ... (44'/2 O.L.) ('/ b -18 thread, hollow) ... 377988* 1 4.30*NOTE: On OE, OF, OG it is necessary to use 3685153 Strg. and 3rd Arm and 3678185

Strg. Knuckle Arm.39-48 PASS. (exc. JB, KB) ............ long, w/studs (33 O.L.-studs same

length both ends) ................ 605923 1 7.5546-55 COE .......................... (49 O.L.) (1-16 int. thds. R.H. and

L.H.) ........................... 3681851 1 5.3547-55 D-D, UJ, UK, VJ, VK, SBC, 2 TON

(1st Ser.) (exc. COE),48-55 1'/, TON w/H.D. (1st Ser.) ....... (471/ O.L.) (1-16 thds. R.H. and L.H. 3683223 1 7.5049-54 PASS . ......................... (2519/ O.L.)(/6-20 thread) ......... 3692953 1 8.0055-59 '4 TON (2nd Ser.) ............... (4723/64 O.L.) ....................... 3712370 1 3.4055-59 ?; TON (2nd Ser.) (exc. D-D)...... (49 O.L.) .......................... 3713014 1 3.2555-63 D-D (2nd Ser.) .................. (4931/ O.L.) ....................... 3715886 1 6.6055-59 1 TON (2nd Ser.) ............... (49/32 O.L.) ....................... 3713316 1 4.6057-59 ALL w/4/WD ................... (less end assys.) .................. 3748694 1 17.2060-63 Ser. 10 (4/WD),60 Ser. 20 (4/WD) ................. (54% O.L.) (1'4 O.D.) ............... 2405966 1 17.7561-66 Ser. 20 (4/WD) ................. (54V,6 O.L.) (1 O.D. at ends) (blue64-66 Ser. 10 (4/WD) .................. paint) (Dana 31879)............... 3799912 1 17.0064-67 Ser. 20-30 (D-D) ................ (4144 O.L.) (1% 6 O.D. at ends) ....... 3843326 1 6.3064 G-10 .......................... (46/44 O.L.)(13/, O.D.).............. 3833432 1 6.1565-66 G-10 ........................... (3955/,,, O.L.)

(1Y5 O.D.) .............. 3863602 1 6.1567-68 G-10 .......................... (40 114 2 O.L. x 1'i%% O.D.).............. 3892508 1 6.1567-68 G-20 .......................... (404 O.L.) ........................ 3889572 1 6.3067-68 4 'WD .......................... .... ............................... 3912018 2 21.50

6.232 SLEEVE, Front Axle Tie Rod

49-54 PASS.,53-62 CORVETTE ................... (18%4 O.L.) (4 9-18 x 218 int. thd.) ... 3691181 1 2.5955-57 PASS. (exc. P/S) ............... left and right, adjusting,55-57 PASS. w/P/S ................... right, adjusting (6

1/ 6 O.L.) ( 94 6 -18 x

1 '% thd.) ....................... 3708529 A.R. 1.4155-57 PASS. w/P/S ................... left (4"/a O.L. ) ( 9/,6-

18 x l' /4 thd.)... 3687942 1 (6.870)58-64 PASS.,60-64 Ser. 10 thru 30 (exc. D-D, 4/WD),61-64 Ser. 10 (D-D) ................... adjusting (8 2 %2 O.D.) (%-18 x 1

6)... 3854805 2 1.5063-68 CORVETTE ..... , adjusting (1019/, O.L.) (%-18 x 1 15/, ,) . 3826816 2 3.8863-64 Ser. 10 w/P/S (exc. 4/WD, D-D)... adjusting (P/S Installation Unit) ..... 3829582 1 3.8565-66 Ser. 10 (exc. D-D, 4/WD),67-68 Ser. 10 thru 30 w/P/S (exc. D-D,

4/Vt'D),68 Ser. 20-30 (D-D) w/P/S .......... adj. (P/S Installation Unit) .......... 3854807 2 4.0065-67 PASS.,65-68 Ser. 10 thru 30 (exc. D-D, 4/WD,

P /S ),65-68 Ser. 10 (D-D) ................... adj. (6 O.L.) ('4 I.D. x 2 14, O.D.)..... 3855946 2 1.46

6.233 END ASSEMBLY-UNIT-FITTING, Tie Rod

NOTE: On END ASSY'S. requiring a dust seal. See group 6.111.38 ALL (exc. EC, FC, GB, HB),38-42 COMM . ........................ left (4 594

4 ) (2342 16 L.H. thd.-stmpd.46-59 4, % TON (exc. D-D) ........... "L") ........................... 374227 1 2.5738 PASS. (exc. EC, FC, GB, MB),38-42 COMM . ........................ right (4594

4 ) ( 25/32 -16 R.H. Pthd.-stm d.46-59 ', % TON (exc. D-D) ............ "R") ........................... 374226 1 2.5738-40 CC, DC, EC, FC, GB, HB, JB, KB left (4"/64)

(2%2_16 L.H. thd.-stmpd.

.L.,) ........................... 472665 1 1.9538-40 CC, DC, EC, FC, GB, HB, JB, KB right (4594 4 ) ( 23/3 -16 R.H. thd.-stmpd.«Rp') ........................... 472664 1 1.95

6.230-6.233 ©- 1967Chevrolet Motor Division


38-42 UTIL. (exc. MT, MY, COE),46-55 1, 1'z TON (exc. UJ, UK,

SBC, H.D.) (1st Ser.),46-59 1 TON (exc. 4/WD) .............. left (4 5

/32 long) ( 13/,,-18 L.H. thd.) .... 601395 1 5.5038-52 UTIL. (exc. MT, MY, COE),46-55 1, 1'2 TON (exc. UJ, UK, VJ, VK,

SBC, H.D.),46-59 1 TON (exc. 4/WD) .............. right (4 5/y 2 long) ("/ 6-18 R.H. thd.) ... 601396 1 5.5039-42 COE ........................... left (4 3/4 long) (1-16 L.H. thd.)40-46 W, Y, M, 0 w/H.D . .............. (stamped N-118).................. 603935 1 6.1539-42 COE ........................... right (4

11/2 b long) (1-16 R.H. thd.)

40-46 W, Y, M, 0 w/H.D ............... (stamped F-110).................. 603934 1 6.1539-54 PASS. (exc. JB, KB) ............. left (4'/2 long) (°/ 6-18 L.H. thd.)53-62 CORVETTE .................... (forged 3691955) ................. 3737595 1 3.4039-54 PASS. (exc. JB, KB),53-62 CORVETTE .................... right (daub of yellow paint) (forged

3691956) ........................ 3737596 1 3.4046-55 2 TON (1st Ser.),46-59 D-D, UJ, UK, VJ, VK, SBC,48-55 1',, TON w/H.D. (1st Ser.)........ left (use w/3681101 frgd. on "I" beam)60-63 D-D (exc. 102 W.B.) ............. (5 long) (1-16 L.H.thd.)............ 609747 1 7.6046-55 2 TON (1st Ser.),46-59 D-D, UJ, UK, VJ, VK, SBC,48-55 1'2 TON w/H.D. (1st Ser.)........ right (use w/3681101 fred. on "I"60-63 D-D (exc. 102 W.B.) ............. beam) (5 long) (1-16 R.H. thd.) .... 609748 1 7.6055-57 PASS . ......................... left and right (forged 3708528) ....... 3713914 1 3.4055-57 PASS. (exc. P/S) ................ left, long,55-57 PASS. . . . . . . . . . . . . . . . . . . . . . . . . . right, long (forged 3707740) .......... 3713905 A.R. 4.2455-5 PASS. w/P/S ................... left, long (forged 3709615)........... 3715906 1 4.4557-59 ALL w/4/WD ................... left (Thompson L/18-SV-150 A-14) 1 6.5057-59 ALL w/4/WD ................... right (Thompson L-18-SV-147-A-83)... 2370703 1 6.5058-62 PASS.,60-62 Ser. 10 (exc. 4/WD) ............... short (3'/ 6 center of socket to end).... 3790672 A.R. 3.5858-62 PASS . ......................... long (11'/2 O.L.) (forged 3740991) ..... 3750574 2 6.5060-62 Ser. 10 (exc. 4/WD) .............. long (forged 3769284) ............... 3769283 2 4.7560-63 Ser. 10 (4/WD),60 Ser, 20 (4/WD) .................. right (stud extends 1

1/ 1l from socket) .. 2421499 1 3.10

60-63 Ser, 10 (4/WD),60 Ser. 20 (4/WD) .................. left (stud extends 1!z" from socket) ... 2421500 1 3.1060-64 Ser. 20-30 (exc. 4/WD, D-D) , , , , , , left, inner long (8 5

/8 center of socketto end).......................... 3762351 1 5.50

60-64 Ser. 20-30 (exc. 4/WD, D-D) , , , , , , right, inner long (8 54 center of socketto end) .......................... 3762352 1 5.50

60-64 Ser. 20-30 (exc. 4/WD, D-D) ...... left, outer short (3'/ 6 center of socketto end) .......................... 3767074 1 5.50

60-64 Ser. 20-30 (exc. 4/WD, D-D) .... right, outer short (3'/ 6 center of sockettoend) ..................... ... 3757564 1 5.50

61-66 Ser. 20 (4/WD) .................. right (3 3/8) (/4-16 R.H, thd.) (Dana64-66 Ser. 10 (4/WD) ................. 22889X) ......................... 3825932 1 3.7561-66 Ser, 20 (4/WD) .................. left (stud extends

211 from socket)

64-66 Ser. 10 (4'WD) .................. (Dana 22890X) ................... 3825931 1 3.7563-64 Ser. 10 (exc. 4/WD) .............. long (6' 9/2 2 O.L.) (forged 3817954) ..... 3817953 2 4.7563-64 PASS . .......................... long (10/z) (forged 3826481) ........ 3826480 2 6.5063-64 PASS., CORVETTE,63-64 Ser. 10 (exc. 4/WD),65-68 CORVETTE .................... short,64 G-10 .......................... left (3 1 5„ O.L.) (3826597) ........... 3826596 2 3.5463-68 CORVETTE .................... right,64 G-10 .......................... (3134o O.L.) (forged 3826815) ......... 3826814 2 3.5464-67 D-D (exc. 102 W.B.) .......... .. left ............................... 3864347 1 7.9564-67 D-D (exc. 102 W.B.) ............. right .............................. 3864348 1 7.9565-67 Ser. 20-30 (CONV.),68 Ser. 20-30 (D-D) ................. left hand thread.................... 3908295 1 5.6065-68 Ser. 20-30 (CONV.),68 Ser. 20-30 (D-D) ................. right hand thread end ............... 3908296 2 5.6065-66 PASS.,65-68 Ser. 10 (exc. 4/WD) .............. (right thread) ...................... 3855947 2 3.9565-66 PASS.,65-68 Ser. 10 (exc. 4/WD),65-68 G-10 ........................... (left thread) ....................... 3855948 A.R. 3.9565-68 G-10 ........................... right.............................. 3863603 1 3.9567-68 G-20 ........................... left ............................... 3864351 1 7.50

6-1967Chevrolet Motor DivisionGeneral Motors Corporation 949

6.233

67-68 G-20 ........................... right.............................. 3864352 1 7.5067-68 Ser. 10-20 (4/WD) ............... right (Dana 34544)........... _ ... _ .. 3910208 1 12.9567-68 Ser. 10-20 (4/WD) ............... left (Dana 34545)......... _ ...... _ - - 3910207 1 12.9567-68 PASS.,67-68 Ser. 10 (exc. P/S, 4/WD)......... left thread .................... .. .. 3909642 2 4.1567-68 PASS . ...... ................. right thread.......... ............. 3909641 3909641 2 4.1538-40 PASS. (exc. JA, KA, KH),38-42 COMM .......................... UNIT (2 springs, 3 plugs, 4 seats, and 246-55 'z, '/., TON (1st Ser.) (exc. D-D), .. , safety rivets) ...................... 608840 1 (6.874)57 PASS. w/P/S ................... FITTING, special elbow lubrication,

90 degree (type C or D), used w/righthand long socket ................... 9417903 1 (8.984)

NOTE: Some end assy. have untapped lubrication fitting holes, on these it is necessary touse a self tapping lub. fittings or tap new threads for standard type lub. fittings.

6.234 CLAMP—BOLT, Tie Rod End

38 PASS. (exc. DC, EC, FC, GB, HB),38-42 COMM.,38-42 UTIL. (exc. MT, MY, COE),46 11/ TON (1st Ser.) (exc. UJ, UK,

VJ, VK, SBC, H.D.),46-59 'i, '4 1 TON (exc. D-D, H.D.),62-67 Ser. 20 (4 /WD) .................. .................................... 352265 2 .4239-64 PASS. (exc. JB, KB),53-66 CORVETTE,60-66 Ser. 10-30,46-59 D-D, UJ, UK, VJ, VK, N, P, SBC,67-68 Ser. 10 (D-D) ................... (3; I.D. x 3/, wide )....... _ _ _ _ .... _ .. 599234 A.R. .3348-55 1'// TON w/H.D. (1st Ser.),60-67 D-D (exc. 102 W.B.) ............. ........ ........................... 3902936 2 .3555-57 PASS. w /P/S ................... strg. control valve to relay rod ....... 5681747 1 .3358-64 PASS.,60-65 Ser. 10 thru 30 (exc. D-D, 4/WD),61-64 Ser. 10 (D-D),63-66 CORVETTE,65-66 G-10 ........................... .................................... 3742920 4 .3860-61 4/WD,62 -66 Ser. 10 (4/WD) ................. . ................................... 3779095 2 .8065-68 Ser. 10 (exc. H.D.),65-68 Ser. 20-30 (exc. D-D, 4/WD),65-68 PASS . ........................ adjust, sleeve .. . . . . . . . 3886435 4 -1067-68 G-10 .........................

. .

67-68...........................

G-203902938 2 35

63 . 66...........................

Ser. 20 4,/WD .................( )........................

BOLT, clamp /-24 x 1/,)p ('x 3 ........... .39029373777828

2

A.R.(6.104).50

6.243 STUD, Tie Rod Ball

46-55 1'2 TON (1st Ser.) (exc, UJ, UK,VJ, VK, SBC, H.D.),

46-59 ',;, 1 TON (exc. D-D, H.D.) ....... (1/z-20) ........................... 377992 A.R. 1.40

6.255 SPRI NG —SEAT—RIVET—PLUG, Tie Rod

38-40 PASS. (exc. JA, KA, KH),38-42 COMM.,46-59 ,''a TON (exc. D-D) ............ .................................... 335976 2 (6.876)38-39 ALL (exc. JA),40-42 COMM., KB,39-59 ^.2, '/2 TON (exc. D-D) ............ SEAT, ball (grooved) ( 634 dia. x 15/32) 595586 4 (6.874)38-40 PASS. (exc. JA, KA, KH),38-42 COMM .......................... RIVET, safety ( i/ dia. x / 6 O.L.-146-59 , ', TON (exc. D-D) ............ dia. hd.) .......................... 354456 2 .1038-40 ALL (exc. JA, KA, KH),41-42 COMM.,46-59 '-; , '; TON (exc. D-D) ............ PLUG, end (1 1/ 6 -18 thd. x '/ O.L.) ..... 335977 2 (6.881)53-62 CORVETTE .................... PLUG, conn. rod safety front (1 5/ 6 long) . 3706039 2 .20

6.233-6.255 c-1967Chevrolet Motor Division


6.307 HUB-HUB ASSY., Front Wheel

38-40 A, LQ, LR, LS, B, CB, DB, EB,ED, FB, FD, GB, HB, JB, KB,

38-42 COMM.,46-50 '/2 TON ........................ (cast 599218) (also stmpd. 963) ...... 369963 2 7.2039 COE,40-42 UTIL. w/H. D. (exc. YR),46-53 UJ, UK, VJ, VK, SBC, 2 TON,48-53 1',z TON w/H.D .................. (cast 3681888) ..................... 3681888* 2 18.35

*NOTE: On early jobs where hub breakage occurs install brake drum 604718or enlarge pilot hole in original drum 4Y8 I.D.

41 1'/z TON (exc. H.D.),42-50

11/2 TON (exc. H.D., SBC),

53-55 1 1i, TON (1st Ser.) (exc. H.D., SBC) (cast 3656885) ..................... 3656885 2 14.4547-59 2, , 1 TON w,'sgl. wheels,60-66 D-D (exc. dual wheels, 102 W.B.),67 Ser. 20-30 (D-D) (exc. 11000 lb.

axle) ........................ (cast 3683232) ..................... 3683232 2 11.9547-59 1 TON w/dual wheels,53-59 3/, TON w/dual wheels (exc. D-D),55-59 D-D w/dual wheels (2nd ser.),60-67 Ser. 30 (D-D) w/dual wheels ...... (cast 3683818) ..................... 3778367 2 16.5051-54 PASS.,53-58 CORVETTE .................... (cast 3694757) ..................... 3694757 2 7.7551-59 !/z TON ......................... (cast 3754160) ..................... 3754160 2 6.9554-55 14 TON w/2-SPD. (1st Ser.)

(exc. SBC) ................... (cast 3711400) ..................... 3711400 2 14.9554-55 1'' TON (SBC) w/2-SPD. (1st. Ser.),54 2 TON ......................... (cast 3704482-dia. flange side-5';) .. 3704482 2 17.3555 PASS . ......................... (cast 3707117) ..................... 3707117 2 6.9556-57 PASS . ......................... (cast 3725849) ..................... 3725849 2 6.9557-59 Ser. 3A w/4/WD ................. (6 holes-6 3/4 0 D.)................. 3747107 2 37.3557-59 Ser. 3E w/4/WD ................. (31/16 brg. hole size)................. 3747108 2 44.2557-59 Ser. 3G w/4 /WD ................. (3 "/6 brg. hole size)................ 3747237 2 44.2559-62 CORVETTE .................... (forged) ........................... 3775686 2 11.7558-59 Ser. 3A w/4/WD ................. locking ........................... 3755998 2 36.5058-59 Ser. 3E-3G w/4/WD .............. locking ........................... 3756000 2 36.5060-61 Ser. 10 (exc. 4/ WD) ............. (6/4 O.D.) ......................... 3761137 2 8.7560-68 Ser. 10 (4/WD) ................. locking (Dana 22429X) .............. 3781982 2 33.5060-63 Ser. 10 (4/WD) .................. w/cup (Budd 82173) ................ 2405956 2 27.5060-68 Ser. 20 (4/WD) .................. w/cup ............................ 2405955 2 29.7560-62 Ser. 20 (exc. 4/WD, D-D),60-62 Ser. 30 (exc. D-D, dual wheels) ... (8 holes-7 13/ 6 O.D.) ................ 3761138 2 12.4560-62 Ser. 30 w/dual wheels (exc. D-D).. (cast 3781376) ..................... 3781376 2 16.5060-68 Ser. 20 (4/WD) .................. locking (Dana 22435X) .............. 3781983 2 36.5062-65 Ser. 10 (4/WD) .................. (6 holes 6'./4 O.D.) .................. 3796902 A.R. 4.1366-68 Ser. 30 (D-D) w/11,000 lb. axle

(exc. 8 cyl.) .................. .................................... 3902973 263-66 Ser. 20-30 (exc. 4/WD, D-D, 18 x

5 or 19.5 x 5.25 wheels, H.D.),67-68 Ser. 20-30 (exc. D-D, 4/WD, 11000

lb. axle) .................... (cast 3821624) ..................... 3883321 2 12.1563-68 Ser. 20-30 w/18 x 5 or 19 x 5

wheels, H.D. (exc. 4/WD, D-D,PICK-UP) .................... (cast 3821626) ..................... 3883322 2 15.75

64-67 G-10 ........................... w/bolt assy. ...................... 3887867 1 7.4567-68 G-20 ........................... .................................... 388954 2 11.8567-68 Ser. 30 w/11000 lb. SGL. SPD. axle

(exc. D-D ) .................... .................................... 3892511 2 34.50

58-60 PASS . ......................... HUB ASSY. w/bolts................. . 3799179 2 7.7061-68 PASS.,63-64 CORVETTE .................... HUB ASSY., w/bolts (5 holes-6 O.D.) , , 3812712 2 7.8064-68 Ser. 10 (4/WD) .................. HUB ASSY. (Budd 88408).............. 2459603 2 27.5065-68 HUB ASSY. w/disc .............. HUB ASSY. w/disc ................... 3867311 2 (5.809)67 PASS. w/disc brakes ............ HUB ASSY. w/disc ................... 3901099 2 32.75

( -1967Chevrolet Motor Division 6.307


6.308 GEAR ASSY.-LOCK ASSY.-CAM ASSY.-HOUSING -COLLAR- RING -SEAL-GASKET- SPRING -PIN-SPACER, Fro nt Wheel Lo ck ing Hub

60-68 Ser. 20 (4 /WD),68 Ser. 10 (4-'WD) .................. axle shaft (Dana 218

85x)............ 3782283 2 17.7560-68 Ser. 10 (4/WD) ............. . ... axle shaft w/collar unit (Dana 3846944) 3867378 1 17.7560-68 Ser. 10 (4/WD) ................. LOCK ASSY. (3'/, dia.) (Dana 22432X)... 3781984 2 25.5060-68 Ser. 20 (4;'WD) .................. LOCK ASSY. (412 dia.) (Dana 22436X)... 3781985 2 25.5068 Ser. 10 (4/WD) .................. axle shaft ..................._.___. 3924176 160-68 4/WD (2nd design) ............... CAM ASSY., lock................... _. 3782276* 2 15.50

*NOTE: For 1st design use 3781984 on YZ TON models and 3781985 on '/4 TONmodels,

60-68 Ser. 20 (4/WD) .................. HOUSING (412 dia.) ................. _ . 3782287 2 17.2560-64 Ser. 10 (4/WD) .................. COLLAR, axle shaft gear (2 15

/ 6 dia.) .... 3782284 2 1.65

60-68 Ser. 20 (4; WD) .................. COLLAR, axle shaft gear (3 54 4 dia.) . .. 3 7 82285 2 5.2565-67 Ser. 10 (4/WD) .................. COLLAR, axle shaft gear (2/ dia.) .... 3872474 246-53 UTIL .......................... RING, frt, hub clamp (use w /

5% hub bolts) 3682390 2 1.1060-67 Ser. 10 (4/WD) .................. RING, locking retaining (3'/,, O.D.) ..... 3702104 2 (4.117)60-67 4/WD .......................... RING, axle shaft retaining (1'/ b I.D.) , 9416705 2 (8.934)65-68 Ser. 10-20 (4/WD) (2nd design) , , , , RING, special snap (1'/

32 O.D.) (Dana32356) ............................ 3881406 2 .20

60-68 Ser. 10 (4/WD) .................. SEAL, lock (21/, dia.) (Dana 31367) ..... 3782282 2 .55

65-68 4/WD .......................... SEAL, "0" ring (1'/ b dia.) use withlocking hub ........................ 3872441 2 .45

60-68 Ser. 20 (4,/WD) ................ . . GASKET, housing inner and outer(4'z dia.) .......................... 3782286 A.R. .10

60-68 4/WD ................... .. SPRING, lock cam (1'4 free length)(Dana 31346) ...................... 3782277 8 .10

60-68 4/WD , , , , , , , , , , _ , PIN, locking actuating knob retainer('ax l'%) (Dana 31791) .............. 3782279 2 .15

60-68 4/WD .. , PIN, lock flange (, x 2 '/,,) (Dana 31348) 3782280 2 .1560-67 Ser. 10 (4/WD) (1st design) ....... SPACER, axle shaft gear (Dana 31143) . 2403685 1 1.25

6.311 BEARING ASSEMBLY, Front Wheel Inner

38-42 UTIL. (exc. COE, MT, MY) ....... (w/strg. knuckle w/inner cone seat46-50 3

/4 1, 14 TON (exc. SBC)......... 1.40 O.D. and outer cone seat .8451-52 3

/4, 1 TON ...................... O.D.) (ND 909526) (ND 909626)(ND 909726) ....................... 909026t 2 11.2639-42 UTIL, w/H.D . .................. ( 1 %6 dia. hole) (groove on O.D.) (Hy A

46-49 SBC, 2 TON (1st design) ......... 11410) (Hy 11410 Z) .............. 173241* 2 10.4841-54 PASS.,41-59 '4 TON,53-62 CORVETTE .................... (ND 909552) (ND 909602) (ND 909702) 909052t 2 10.4449-50 SBC, 2 TON (2nd design)......... (1'% dia. hole) (Hy A11424)51-53 UJ, UK, VJ, VK, SBC, 2 TON, , , , , (Hy 11424Z) ..................... 7450131* 2 10.4453-55 1'/Z TON (1st Ser.)

(exc. SBC, H.D.),53-59 3

/4 , 1 TON (exc. H.D.),60-66 D-D (exc. 102 W.B.),67 Ser. 20-30 (D-D) (exc. 11000 1b. axle) (ND 909648) ....................... 909044 2 9.5254-55 SBC, 2 TON,54-55 lY2 TON w/H.D.,67 Ser. 30 (D-D) w/11000 lb. axle .... (shaft dia. 1'/4) (HY C125298WA)...... 7450335* 2 10.5055-57 PASS .......................... (ND 909040) ....................... 909040T 2 7.3857-59 Ser. 3A-3E w/4/WD,60-67 Ser. 10 (4/WD) ................. (1 25

/32 I.D. x 3% O.D. x 25/x thk.) ...... 7451090 2 (5.536)58 PASS.,

59-60 PASS. (exc. TAXI) .............. (ND 909070) Ball................... 909070t 2 6.3059-60 TAXI .......................... (Hy A-153213Y) Roller.............. 7451083# 2 5.96$NOTE: When using 7451083 on the above models, Wheel Bearing (outer)

7451085 and 3770169 Felt Assy -Front Wheel inner bearing mustbe used.

60-61 Set. 10 (exc. 4/WD) .............. (ND 909566) (ND 909762) (ND 909666) 909066 2 8.2060-62 Ser. 20-30 (exc. 4/WD, D-D) , , , , , , (ND 909548) (ND 909726) (ND 909648) 909048 2 9.3461-68 PASS.,63-68 CORVETTE,64-68 G-10 ...................... .... (Hy A-153213Z).................... 7450630 2 3.33

6.308-6.311 ©-1967



2 7.252 5.982 (5.536)

2 (5.536)2 4.53

2 5.02

2 2.60

2 3.44

62-68 Ser. 10 (exc. 4/WD),67-68 G-20 ....... (HY A-141236Z) .................... 7450700 2 4.1663-67 Ser. 20-30 (exc. D-D, 4/WD) ...... (Hy C-114268Z) .................... 7451287 2 5.85

tNOTE: Consists of cone, cup, and separator (also listed separately).*NOTE: Component parts are not serviced separately.

6.313 BEARING ASSEMBLY, Front Wheel Outer

38-54 PASS. (exc. CC, DC, EC, FC),38-61 '/2 TON (exc. 4/WD),53-62 CORVETTE,56-60 PASS . ......................... ball type (ND 909567) (ND 909667)

(ND 909767) ..................... 909067t 238-42 UTIL. (exc. COE, MT, MY, H.D.), , (w/strg. knuckle w/inner cone seat46-50 3/4 , 1, 1'/2 TON (exc. SEC)......... 1.40 O.D. and outer cone seat .8451-52 3/, 1 TON ...................... O.D.) (ND 909525) (ND 909625)

(ND 909725) ..................... 909025t 239-42 UTIL. w/H.D ................... (15/6 dia. hole) (groove on O.D.) (Hy A46-49 SBC, 2 TON (1st design)......... 11020) (Hy 11020Z) ............... 173238*49-50 SBC, 2 TON (2nd design)......... (1'/2 dia. hole) (Hy A11035)51-53 UJ, UK, VJ, VK, SBC, 2 TON 11035Z) ..................... 7450034*54-55 1'4 TON w/H.D. (1st Ser.),54-55 SBC, 2 TON (1st Ser.),67 Ser. 30 (D-D) w/11000 lb. rr. axle (shaft dia. 1 1/32 ) (Hy 131224Z) ........ 7450336*55 PASS .......................... (ND 909041) ....................... 909041t57-59 Ser. 3E-3G w/4/WD .............. (Hy A-159286Y).................... 745109057-59 Ser. 3A w/4/WD,60-68 4/WD .......................... (Hy A-150269Z).................... 745122659-60 TAXI .......................... (Hy A-113158Y) Roller type.......... 7451085#

$NOTE: When using 4751085 on the above models, wheel Bearing (inner) 7451083 and3770169 Felt Assy.-Front Wheel inner bearing must be used.

53-55 1'i TON (1st Ser.) (exc. SBC,H. D.),

53-59 3;, 1 TON (exc. H.D.),60-62 Ser. 20-30 (exc. 4/WD),63-66 Ser. 20-30 (D-D),67 Ser. 20-30 (D-D) (exc. 11000 lb. axle) (ND 909547) (ND 909725) (ND 909673) 90904761-67 PASS.,62-68 ';z TON (exc. 4-WD),63-67 CORVETTE,64-68 G-10 ........................... (Hy A-113158Z).................... 7450627*63-68 Ser. 20-30 (exc. D-D, 4/WD),67-68 G-20,68 Ser. 20-30 (D-D) w/H.D. spring.... (Hy M-12649-M-12610) ............... 7450697

*NOTE: Component parts are not serviced separately.tNOTE: Consists of cone, cup, and separator (also listed separately).

6.314 CONE, Front Wheel Inner Bearing

Ir

5.26

8.08

7.41

7.48

38-42 UTIL. (exc. COE, MT, MY) .......46-50 3/4 , 1, 1'/2 TON (exc. SBC).........51-52 '/4 , 1 TON ......................41-54 PASS.,41-59 '/2 TON,53-62 CORVETTE ....................53-55 1% TON (1st Ser.) (exc. SBC, H.D.),53-59 34, 1 TON (exc. H.D.),60-66 D-D (exc. 102 W.B.),67 Ser. 20-30 (D-D) (exc. 11000 lb. axle)54-55 1'/=, 2 TON,67 Ser. 30 (D-D) w/11000 lb. axle ....55-57 PASS ..........................57-59 Ser. 3G w/4/WD ................ .58-60 PASS ..........................60-61 Ser. 10 (exc. 4/WD) ............. .60-67 Ser. 20 (4/WD) ..................60-62 Ser, 20-30 (exc. 4/WD, D-D) ......58-66 PASS., TAXI ...................62-66 Ser. 10 (exc. 4/WD)..............63-66 Ser. 20-30 (exc. D-D, 4/WD) ......

(w/strg. knuckly w/inner cone seat1.40 O.D. and outer cone seat .84O.D.) (ND 909526) ................

(1'/ O.D. x 1 9/3z I.D.) (ND 909552).....

(2 3/3 2 O.D. x 1'/2 I.D , .) (ND 909546)....

(Hyatt C 125298) .................(ND 909540) .......................roller bearing ......................(ND 909570) .......................(ND 909566) .......................roller bearing ......................(ND 909548) .......................w/rollers (Hy A-153213) ............ .(Hy A-1412362) ....................inner (Hy C-114268) ................

909526 2 3.48

909552 2 4.02

909546 2 3.36

7450342 2 6.54909540 2 3.06457116 2 4.86909570 2 2.58909566 2 3.04

148347 2 5.32909548 2 3.24

7450632 2 (6.318)7450699 2 (6.318)7451286 2 3.75

9-1967Chevrolet Motor Division 6.311-6.314General Motors Corporation 953

6.315 CONE, Front Wheel Outer Bearing

38-54 PASS.,38-58 Y TON (1st design),53-58 CORVETTE (1st design)56 -57 PASS ..........................55 PASS ..........................

58-60 PASS.,58-61 '2 TON (2nd design),58-62 CORVETTE (2nd design} ........57-59 Ser. 3A w/4 /WD .................60-67 4/WD ..........................64 G-10 ...........................53-55 1'4 TON (1st Ser.) (exc. SBC, H.D.),53-59 ".^, 1 TON (exc. H.D.),60-62 Ser. 20-30 (exc. 4/WD),63-66 Ser. 20-30 (D-D),67 Ser. 20-30 (D-D) (exc. 11000 lb. axle)58-64 PASS.,62 -64 Ser. 10 (exc. 4/WD),63-64 CORVETTE ....................63-64 Ser. 20-30 (exc. D-D, 4/WD) ......

(1^/2 O.D. x 3/4 I.D.) (ND 909501)...... 909501 2 2.50w/separator and balls (ND 909541) ... 909541 2 3.90

(1'/4 O.D. x 3/4 I.D.) (ND 909567) ...... 909567 2 2.08roller brg. (Dana 550-433)differential bearing inner race and

roller........................... 457233 2 3.46

(ND 909547) ....................... 909547 2 2.08

w/rollers (Hy A-113158) ............. 7450629 2 (6.319)inner, (HY A-105177) ............... 7450696 2 2.31

6.316 CUP, Fron t Wheel Inner Bearing

38-54 PASS.,38-59 !12 TON,53-62 CORVETTE ................. .. (2/e O.D. x 2 2 %64 I.D.) (ND 909602).... 909602 2 4.1438-42 UTIL. (exc. H.D., COE, MT, MY),46-55 1'z TON (1st Ser.) (exc. H.D., UJ,

UK, VJ, VK, SBC),46-59 ',;, 1 TON (exc. H.D.),60-62 Ser. 20-30 (exc. 4/WD),63-66 Ser. 20-30 (D-D),67 Ser. 20 -30 (D-D)(exc. 11000 lb. axle) (ND 909648) ....................... 909648 2 3.8455-57 PASS . ......................... (2 /— O.D. x 9/,,) (ND 909640) ......... 909640 2 2.8257-59 Ser. 3G w/4/WD,58-59 Ser. 3E w/4/WD ................. (roller)............................ 457117 A.R. 2.2658 PASS.,59-60 PASS. (exc. TAXI) .............. (ND 909670) ....................... 909670 2 2.4059-60 TAXI .......................... ................................ 7451084 1 3.6960-61 Ser. 10 (exc. 4/WD) .............. (ND 909666) ....................... 909666 2 3.1860-68 Ser. 20 (4/WD) .................. (roller)........................_... 187617 4 2.7662 -64 Ser. 10 (exc. 4 /WD) .............. (Hy A-141236Z) .................... 7450698 2 1.3461 -64 PASS.,63 -64 CORVETTE, G10 ............... (Hy 153213Z) ...................... 7450631 2 .97

6.317 CUP, Front Wheel Outer Bearing

38-42 COMM.,38-54 PASS.,46-58 !2 TON (1st design),53-58 CORVETTE (1st design),56-57 PASS . . . . . . . . . . . . . . . . . . . . . . . . (246 O.D. x 1% I.D.) (ND 909601)..... 909601 2 2.8638-42 UTIL. (exc. H.D., COE, MT, MY),46-55 12 TON (1st Ser.) (exc. H.D., UJ,

UK, VJ, VK, SBC),46-59 %, 1 TON (exc. H.D.),60-63 Ser. 20-30 (exc. 4/WD),64-66 Ser. 20-30 (D-D),67 Ser, 20 -30 (D -D) (exc. 11000 lb. axle) (ND 909673) ....................... 909673 2 2.1055 PASS ......................... (1'/l6 O.D. x ^/) (ND 909641) ......... 909641 2 2.5057-59 Ser. 3A w/4/WD,60-62 4/WD,63 Ser. 10 (4/WD),64-68 4/WD .......................... roller brg.......................... 457234 2 1.7459-60 TAXI .......................... (113/32 I.D. x 25

44) ................... 7451086 2 2.9058-60 PASS.,58-62 CORVETTE (2nd design),58-61 ' 2 TON (2nd design) (exc. 4/WD) .. (23/„ O.D. x 1/,, I.D. (ND 909667) ... 909667 2 2.16

6.315-6.317 4-1967



10

.10

15

25

61-64 PASS.,62-64 Ser. 10 (exc. 4/WD),63-64 CORVETTE .................... (Hy 113158Z) ...................... 7450628 2 .8963-64 Ser. 20-30 (exc. D-D, 4/WD)....... outer, (HY A-105177Z) .............. 7450695 2 1.1363-64 Ser. 20-30 (exc. D-D, 4/WD)....... (Hy 114268-Z) ..................... 7451102 2 2.10

6.318 SEPARATOR ASSEMBLY—CONE, Front Wheel Inner Bearing, w/Balls

38-54 PASS.,38-59 Y TON53-62 CORVETTE .................... (ND 909702) ....................... 909702 2 2.8238-42 UTIL. (exc. H.D., COE, MT, MY),46-55 1'/ TON (1st Ser.) (exc. H.D., UJ,

UK, VJ, VK, SBC),46-59 'a, 1 TON (exc, H.D.),60-62 Ser. 20-30 (exc. 4/WD) ........... (w/strg. knuckle w/inner cone seat63-66 Ser. 20-30 (D-D) ................. 1.40 O.D. and other cone seat .8467 Ser. 20-30 (D-D) (exc. 11000 lb. axle) O.D.) (ND 909726) ................ 909726 2 2.5055-57 PASS .......................... (21/, O.D. x '/) (ND 909740) .......... 909740 2 2.0458-60 PASS .......................... (ND 909770) ....................... 909770 2 1.8060-61 Ser. 10 (exc. 4/WD) ............. (ND 909762) ....................... 909762 2 2.5058-64 PASS., TAXI,63-64 CORVETTE, G10 ............... CONE, w/rollers (Hy A-153213) ........ 7450632 2 2.36

Not required in this group, seegroup6.314 ................... CONE .............................. 7450699 2.82

6.319 SEPARATOR ASSE MBLY—CONE, Front Wheel Outer Bearing, w/Balls

38-54 PASS.,38-58 '/ TON (1st design),53-58 CORVETTE (1st design),56-57 PASS .......................... (ND 909701) ....................... 909701 2 1.5438-42 UTIL. (exc. H.D., COE, MT, MY),46-59 1% TON (1st Ser.) (exc. H.D., UJ,

UK, VJ, VK, SBC),46-59 4, 1 TON (exc. H.D.),60-62 Ser. 20-30 (exc. 4/WD) ........... (w/strg. knuckle w/inner cone seat63-66 Ser. 20-30 (D-D) ................. 1.40 O.D. and outer cone seat .8467 Ser. 20-30(1343) (exc. 11000 lb. axle) O.D.) (ND 909725) ................ 909725 2 1.3658-62 CORVETTE (2nd design),58-61 !Z TON (2nd design) (exc. 4/WD),58-60 PASS .......................... (ND 909767) ....................... 909767 2 1.1855 PASS .......................... CONE, w/separator and balls (ND 909541) 909541 2 (6.315)58-64 PASS.,62-64 Ser. 10 (exc. 4/WD),63-64 CORVETTE .................... CONE, w/rollers (Hy A-113158) ...... . 7450629 2 1.71

6.321 WASHER—SPACER—RETAINER, Steering Knuckle Spindle

38-54 PASS.,38-61 ! TON (exc. 4/WD),53-62 CORVETTE,56-60 PASS .......................... (3/4 I.D. x 1 15/ 6

O.D.) ................ 3663991 261-68 PASS.,62-68 'z TON (exc. 4/WD),63-68 CORVETTE .................... (3/, I. D. x 1/ O.D.) ......... _ _ _ .... 3775189 238-42 UTIL. (exc. H.D., COE, MT, MY),46-52 34, 1 TON, UTIL. (1st design),53-55 1'-z TON (1st Ser.) (exc. SBC, H.D.),53-59 '4, 1 TON (exc. H.D.),60-66 Ser. 20-30 (exc. 4/WD),67-68 Ser. 20-30 (exc. 4/WD, 11000 lb.

axle) ........................ (w/knuckle having inner cone seat67-68 G-20 ........................... 1.40 O.D.)....................... 379657 239 COE,40-46 W, Y, M, 0 w/H.D . .............. ('5/32 I.D. x 1 13/ 6 O.D.) ............... 654658 2

©-19676.317-6.321Chevrolet Motor Division .


52 11/2 TON, 2 TON (2nd design),53-55 2 TON (1st series),53-55 1'/2 TON w/H.D., (1st Ser.),52-55 SBC (1st Ser.),67 Ser. 30 (D-D) w/11000 lb. axle ,,, ('/8 I.D. x 2/2 O.D.) ................. 3702236 2 .1555 PASS .......................... (3/4 I. D. x 1 3

/4 O. D.).................. 3707118 2 .1057-59 Ser. 3A w/4,/WD ................. SPACER ............................ 3747226 2 3.2557-59 Ser. 3A w,/4/WD ................. RETAINER, inner brg................. 3747105 2 8.65

6.323 DEFLECTOR, Front Hub or Drum Oil

38-42 UTIL. (exc. H.D., COE),46-50 1'/2 TON (exc. SEC),53-55 1'/2 TON (exc. SBC, H.D.) (1st Ser.) hub, inner (1 3

/4 I.D. x 3'Y 6 O.D.) ...... 3698069 2 .3039 COE,40-55 UTIL. (exc. WA),67 Ser. 30 (D-D) w/11000 lb rear axle . brake drum ........................ 3650738 2 .6541-48 PASS.,41-59 !2 TON ......................... hub, inner (stamped 41) ............. 3656535 2 .3349-59 '/„ 1 TON,60-66 D-D (exc. 102 W.B.),67 Ser. 20-30 (D-D) (exc. 11000 lb. axle) hub, inner (1'/a I.D. x 4'/ 2 O.D.)....... 3698071 2 .4547-59 'a, 1 TON w/sgl. wheels ......... brake drum (4'/e I.D. x 7 3% O.D. x %R

60-67 D-D (exc. dual wheels, 102 W.E.).. thick) ........................... 3683233 2 .9547-59 1 TON w/dual wheels,53-59 '/a TON w/dual wheels (exc. D-D). brake drum (4% I.D. x 7 3% O.D. x 13/,,55-67 D-D w/dual wheels (2nd Ser.)... thk.) ............................ 3683237 2 .9549-54 PASS.,53-62 CORVETTE .................... hub, inner (1 1r/ 2

I.D. x 3 '46 O.D.) ..... 3687629 2 .3349-54 PASS.,53-62 CORVETTE .................... brake drum (3°/ 6 I.D. x 6 O.D.) ....... 3779683 2 .6149-50 SBC, 2 TON (2nd design),49-53 1!2 TON w/H.D.,51-53 UJ, UK, VJ, VK, SBC, 2 TON..... hub, inner (2'/ 6 dia. hole)............ 3691428 2 .3051-59 '/2 TON ......................... brake drum (3 3

/4 I.D. x 6% O.D.)....... 3694884 2 .6554-55 1'2 TON w/ H.D. (1st Ser.),54-55 SBC (1st Ser.),67 Ser. 30 (D-D) w/11000 lb. axle .. hub inner (2'/ 6 I.D. x 3 27/32 O.D.) , ..... 3704488 2 .3057-59 Ser. 3E-3G w/4,WD .............. brake drum ........................ 3747328 2 1.5060-61 Ser. 10 (exc. 4/WD) .............. brake drum (35

/ 6 I.D. x 6% O.D.)...... 3761000 2 .6560-65 Ser. 20-30 (exc. 4/WD, D-D) ...... brake drum (3 13/2 x 7 23/3, O.D.)........ 3761001 2 .9560-65 Ser. 30 w/7-17.5/6 PR, 7.00-18./8

PR (exc. PICK-UP)............ brake drum (3"/ 6 I.D. x 7 27/32 O.D.).... 3761002 2 .9562-65 Ser. 10 (exc. 4/WD) .............. hub, inner (3 I.D. x 3 21%„ O.D.) ....... 3796901 2 .65

6.326 FELT—SEAL ASSY.—GASKET, Front Wheel Bearing

38-40 H, J, K ........................38-42 UTIL. (exc. H.D., COE, MT, MY),46-55 1'/2 TON (1st Ser.) (exc. UJ, UK,

VJ, VK, SBC, H.D.),46-59 ';, 1 TON (exc. H.D.) ............60-66 D-D (exc. 102 W.B.),67 Ser. 2030 (D-D) (exc. 11000 lb. axle)39 COE,40-42 UTIL. w/H.D.,

w/retainer, inner brg. (1 3/4 I.D. x 3 O.D.) 352488 2 .66

w/retainer, inner brg. (w/strg. knucklew/inner cone seat 1 13,, O.D. andouter cone seat

27/379654 2 .85

46-49 SBC, 2 TON (1st design) ......... w/retainer, inner brg. (2'/64 dia. hole). 3650735 2 .7041-54 PASS.,41-59 '/ TON,53-62 CORVETTE .................... w/retainer inner brg. (stamped 41).... 3656536 2 .7549-50 SBC, 2 TON (2nd design),49-53 1% TON w/H.D.,51-53 UJ, UK, VJ, VK, SEC, 2 TON..... w/retainer, inner brg. (2 19

% 4 dia. hole) 3691478 2 .80

54-55 2 TON (1st Ser.),54-55

112 TON w/H.D. (1st ser.),

54-55 SBC (1st Ser.),67 Ser. 30 (D-D) w/11000 lb. axle .. inner brg. (3'/ 6 I.D.) ...... 3704483 2 .8055-57 PASS .......................... w/retainer (2 I.D. x 2% O.D.) ........ 3725850 2 .7058-60 PASS .......................... w/retainer, inner brg. (2 I.D. x 223/32

O.D.) ........................... 3770169 2 .70

6.321 ©-1967Chevrolet Motor Division


60-61 Ser. 10 (exc. 4/WD, D-D) ......... w/retainer, inner brg. (2/3 2 I.D. x 2'/O.D.) ........................... 3766493 2 .80

60-62 Ser. 20-30 (exc. 4/WD, D-D) ...... w/retainer, inner brg. (2%e I.D. x 35/32O.D.) ........................... 3768598 2 .80

61-68 PASS.,63-68 CORVETTE .................... SEAL ASSY., inner bra................ 3876192 2 .7057-59 Ser. 3A w/4/WD ................. SEAL ASSY., inner brg................ 3748566 2 1.5057-59 Ser. 3E w/4/WD ................. SEAL ASSY., inner brg................ 3748568 2 1.9557-59 Ser. 3G w/4/WD ................. SEAL ASSY., inner brg................ 9111307 2 1.9560-67 Ser. 10 (4/WD) .................. SEAL ASSY., inner brg................ 2444160 2 1.1060-67 Ser. 20 (4/WD) .................. SEAL ASSY., inner brg. (2°/ 6 I.D. x 3%

O.D.) ............................ 3780374 2 2.3562-67 Ser. 10 (exc. 4/WD),67-68 G-20 ........................... SEAL ASSY., inner brg..............._ 3864171 2 .8063-68 Ser. 20-30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) ................. SEAL ASSY., inner brg. oil ............ 3857731 2 .8066-68 G-10,67 PASS. w/disc brakes ............ SEAL ASSY., inner bearing ............ 3876191 2 .6167-68 Ser. 20 (4/WD) .................. SEAL ASSY., inner bearing ............ 3912016 2 2.9557-59 Ser. 3A w/4/WD ................. GASKET, inner retainer

(3/32 I.D. x 4'/4

O.D.) ............................. 3747222 2 .35

6.507 KIT, Hydraulic Steering (Small Parts) (See Groups 6.551 for adapter kits and6.609, 6.610, 6.612, 6.614, 6.615 for pump kits)

53-54 PASS .......................... strg. gear, gasket and seal.......... 5680153t 1 4.15tNOTE: Consists of 14 "O" ring seals, 3 gaskets, 1 packing and 1 retainer.

55-57 PASS . ......................... control valve, seal and washer....... 5682694* 1 1.2255-57 Ser. 3 .......................... valve seal (bendix 12059)(1Y16 bore)., 3749136tt 1 1.5555-59 Ser. 3 .......................... ball stud (Bendix 126727) ........... 3733875k 1 6.50

•NOTE: Consists of 2 seats, 1 "0" ring, 1 cover.55-57 PASS .......................... control valve ...................... 5683345 ® 1 27.85

®NOTE: Consists of 1 each housing and spool assy., seal, spring, nut, pin, spacer,and 3 washers.

55-57 ALL ........................... cyl. piston rod seal and wiper........ 5682561** 1 1.9858 PASS .......................... control valve, seal and washer....... 5686262* 1 1,0858-64 PASS.,66-67 Ser. 10 thru 30 (exc. D-D) ........ control valve ..................... 5688501t 1 32.05

+tNOTE: Complete valve service kit.58-62 PASS. (exc.. 348, 409 H/Per., Sp, ball stud (used with cyl. with lub.

H/Per.) ...................... fitting on end plug) ............... 5690964 1 .9458-64 PASS. (exc. 348 H/Per., Sp.

H/Per.),58-59 Ser. 3,63-68 CORVETTE,63-68 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) ................. cylinder, piston rod seal .. . . . . . . . . . . 5686382** 1 1.7458-59 Ser. 3 .......................... control valve seal (Bendix 127314)

(1'/6) ........................... 3754052tt 1 1.5559 PASS .......................... control valve seal.................. 5687225§§ 1 1.36

§NOTE: Consists of 2 seals, 1 nut, and 1 pin.60-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 (exc. D-D, 4/WD),67 Ser. 10-20 (4/WD),68 Ser. 20-30 (D-D) ................. control adapter valve seal and washer. 56879970 1 1.41

ONOTE: Consists of 2 seals. 1 "0" ring and 1 nut.63-64 ALL, CORVETTE (exc. 4/WD,

D-D),65 Ser. 10 thru 30 (exc. 4/WD, D-D),65-68 CORVETTE,67 Ser. 10 thru 30 (exc. D-D),68 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D-D) ................. ball stud ................... _ „ _ ... 5691207 1 .9463-68 CORVETTE .................... valve assy......................... 5691959 1 30.9563-67 Ser. 10 thru 30 (exc. D-D, 4/WD) , , control valve .................... . . 5687999 1 26.0065-68 PASS . ........................ master seal (major repair) ........... 5684338 1 10.5065-67 PASS . ......................... "O" ring seal (minor repair) ......... 5681688 1 2.75

©-1967 6.326-6.507Chevrolet Motor DivisionGeneral Motors Corporation 957

59.2564.5061.2543.1543.1571.30

1

1 59.251 61.251 61.251 50.701 66.45

1 81.901 66.451 81.90

1 74.151 49.851 47.101 51.351 49.90

49.9051.1049.90

N.L.

N.L.N.L.N.L.N.L.

N.L.

N.L.

68 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D -D ) ................. .................................... 7804012 168 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D-D) ................. control valve ...................... 5688501 1

*NOTE: Consists of 1 each: seal assy., seal, washer, locknut, pin.=*NOTE: Consists of 1 each seal, ring, washer, scraper, and element.

ttNOTE: Consists of 2 seals, 1 "0" ring, 1 cover.

6.508 GEAR ASSEMBLY-GEAR UN I T- ADAPTER UNIT, Steering

NOTE: Assemblies do not include mast jacket, except where shown.41-46 COMM., UTIL. (exc. COE)........ (cast 267733) (48 15/ 6 O.L.)........... 267793*

*NOTE: On initial installation on 194 -46 AN, BN, DS and UTILITY models,cut 1 7/6" off end of mast jacket.

47-53 COMM., 1Yz TON (exc. EP, ER,D-D, SBC) .................... ( w/mast jacket) (cast 270280)........ 270927

47-53 SBC, 2 TON (exc. COE).......... (w/mast jacket) (cast 270251)........ 27022447-53 COE ........................... (w/mast jacket) (cast 270778)........ 566298249-52 PASS .......................... (w/mast jacket) ("X" cast on hsg.)... 566430653-54 PASS. (exc. P/S) ................ (w/mast jacket) .................... 566632253-62 CORVETTE .................... (w/mast jacket) (charcoal)........... 567287254-55 Yz , TON (1st Ser.),54-55 1 TON H.T. w/H.D. (1st Ser.)54-55 1, 1'/z TON w/'4-SPD. (1st Ser.)

(exc. H.T., H.D., SBC)......... (w/mast jacket) (jet black) .......... 566520054-55 D-D (1st Ser.) ................... (w/mast jacket) (jet black) .......... 566520254-55 SBC, 2 TON (1st Ser.) (exc. COE) (w/mast jacket) (jet black) .......... 566520555-57 PASS .......................... .... ............................... 567107455-56 Ser. 3 (2nd Ser.) (exc. D-D) ....... (w/mast jacket) .................... 5670505T

tNOTE: On 1955 8 cyl. models it will be necessary to lengthen the lower transmissioncontrol slot using the removed hsg. as a pattern. Also paint to spec.

55-56 D-D (2nd Ser.) .................. (w/mast jacket).................... 567051957-59 Ser. 3 (exc. D-D) ................ (w/mast jacket) (charcoal) ........... 5672213$57-62 D-D (exc. 102 W.B.) ............. (w/mast jacket) ................... 5672165t57-59 SBC ........................... ( w/mast jacket) (charcoal) (daub of

yellowpaint) .................... 5672170+58 PASS .......................... .................................... 567181159-64 PASS. (exc. P/S) ................ .................................... 567932459-64 PASS. w/P/S ................... .................................... 567932060-63 4,'WD (1st Ser.) ................. .................................... 568956560-66 Ser. 10 (exc. 4/WD),60-66 Ser. 20-30 (exc. 4/ WD, D -D ) ...... ....................................63-68 CORVETTE .................... ....................................63-66 4/WD (2nd Ser.) ................. ....................................64-66 G-10 ........................... ....................................63-67 Ser. 20-30 (D-D) .................

#NOTE: When using on 63 and early 64 vehicles one each of the following mustalso be ordered: 3848639 Jacket, 5672849 Clamp, 454891 Bolt, 187119L-washer, 9422296 Nut.

65-66 PASS. (w/P/S, T.W., Tel. W.)..... ....................................65-66 PASS. (w/P/S) (exc. T.W., Tel. W.)65 PASS. (exc. P/S) ................ ....................................67-68 Ser. 10 thru 30 (exc. D-D, 4/WD) .. .............................. .....67-68 Ser. 10 (D-D),68 Ser. 20-30 (D -D ) ................. .................................... 5698065 167-68 G-10-20 ........................ 5697824 167-68 (4 ,/WD) 780134762-63 PASS (409) ..................... GEAR UNIT, w/adapter (P/S Installation

Unit) ............................. 3829866 1

1 45.70

5673642 1 49.905677642 1 71.305690974 1 49.905691769 1 51.105679800# 1 82.15

5696116 1 80.255696113 1 80.255679270 1 58.805697954 1 49.90

63-64 Ser. 20-30 (8 cyl.) (exc. D-D,4/WD),

65-66 Ser. 20-30 ......................65-66 Ser. 10 .........................65-66 PASS. w/T.W . ..................65-66 PASS. (exc. T.W.) ...............67 Ser. 10 (exc. 4/WD) ............. .

67 Ser. 20-30 (exc. 4/WD) ...........

67 PASS . ........................

6.507-6.508

GEAR UNIT, use w/adapter 3871561 ....GEAR UNIT, use w/adapter 3832395 ....GEAR UNIT, (P/S Installation Unit) ...GEAR UNIT, basic (P/S Installation Unit)GEAR UNIT, basic (P/S Installation

unit) ................GEAR UNIT, basic (P/S Installation

unit) ..............................GEAR UNIT, basic (P/S Installation

unit) .......................

958

38896651 13889664♦ 13889652 13889651 1

3912304 1

3912306 1

3912120 1 N.L.©-1967

Chevrolet Motor DivisionGeneral Motors Corporation

68 PASS. , , , , , , , , , , , , , , , , , , , , , , GEAR UNIT, basic (P/S Installation). , . 3930709 168 Ser. 10 (CONY.),,,,,,,,,,,,,,,,, GEAR UNIT......................... 3931228 168 Ser. 20-30 (CONY.) .............. GEAR UNIT , ... .................... 3931229 165-66 Ser. 10 thru 30 (292) ............. ADAPTER UNIT ..................... 3832395S 1 N.L.

SNOTE: Not used with 292 engine with Air Cond. together with powerglide orhydramatic for 66.

65-66 Ser. 10 thru 30 (283, 327)......... ADAPTER UNIT ..................... 3871561 1 N.L.65-67 PASS. (283, 327) ................ ADAPTER UNIT ..................... 3912339 1 N.L.66 Ser. 10 thru 30 (250) . . ........... ADAPTER UNIT ..................... 3889666 1 N.L.66 PASS. (250) (exc. A.I.R.)......... ADAPTER UNIT ..................... 3889653 1 N.L.65-66 PASS. (396, 427) ................ ADAPTER UNIT ..................... 3889657A 1 N.L.67 Ser. 10 thru 30 (8 cyl.) (exc. 4/WD) ADAPTER UNIT ..................... 3912307 1 N.L.67 Ser. 10 thru 30 (292) (exc. 4/WD). . ADAPTER UNIT ..................... 391230544 1 N.L.67 Ser. 10 thru 30 (250) (exc. 4/WD). . ADAPTER UNIT ..................... 3912309*** 1 N.L.67 Ser. 10 thru 30 (exc. 4/WD) (292) .. ADAPTER UNIT, supplementary ....... 3912360 1 N.L.67 Ser. 10 thru 30 (exc. 4/WD) (250). . ADAPTER UNIT, supplementary ....... 3912239 1 N.L.67 PASS. (396, 427) ................ ADAPTER UNIT ..................... 3912341 1 N.L.67 PASS. (exc. A.I.R.) (250)......... ADAPTER UNIT ..................... 3912255 1 N.L.67 PASS. (w/A.I.R.) (250)........... ADAPTER UNIT ..................... 3912237 1 N.L.68 PASS. (6 cyl.) (exc. P.G., C.A.C.). ADAPTER UNIT , , , ,,, , , , , , ,, , , , , , , , , 3930721 168 PASS. (6 cyl.) w/P.G. (exc.

C.A.C.) ...................... ADAPTER UNIT ..................... 3930722 163 PASS. (8 cyl.) (exc. 396, 427,

C.A.C.) ...................... ADAPTER UNIT,,,,,,,,,,,,,,,,,,,,, 3930723 168 PASS. (396, 427) (exc. C.A.C.)., , , ADAPTER UNIT , , , , , , , , , , , , , , , , , , , , , 3930724 168 Ser. 10 thru 30 (CON V.) (8 cyl.). .. ADAPTER UNIT , , , , , , , , , , , , , , , , , , , , , 3929725 168 Ser. 10 thru 30 (CONY.) (292) (exc.

A,I.R.) ....................... ADAPTER UNIT , , , , , ................ 3929722 168 Ser. 10 thru 30 (CONY.) (292)

w/A.I.R ...................... ADAPTER UNIT ..................... 3929724 168 Ser. 10 thru 30 (CONY.) (250)

w/A.I.R ...................... ADAPTER UNIT..,,,,,..,,,.,,,,.,,, 3929723 168 Ser. 10 thru 30 (CONY.) (250) (exc.

A.I.R.) ....................... ADAPTER UNIT,,,,,,,,,,,,,,,,,,,,, 3929721 1•SNOTE: Order unit 3912360 for installation on vechicles use w/A.I.R.

* *NOTE . Order unit 3912239 for installation on vechicles use w/A.I.R.ANOTE: When using with Sp. H/Per, engine order (1) 3873847 pulley and discard (1) 3874416

and (1) 3860457 pulley.tNOTE: When using in place of 5671254, the comparable 1958 Pitman arm must also be

used. Remove terminal and connector and replace with 2962958.tNOTE: The following changes must also be made depending on equipment:

a) Order (1) 3891387 Hose—Pump to Control Valve. Use as is on vehicleswith O.B.A.C. Cut 4 1, off for use on vehicles without O.B.A.C. Discard3885018 Hose.

b) Order (1).3890229 Hose—Pump to Air Cleaner—when used on vehicleswith O.B.A.C. Cut to 10/4 inches. Discard,3883203 Hose,

c) Order (1) 3891388 Hose—Pump to Air Cleaner—when used on vehicleswith governor except those with O.B.A.C. Discard 3883203 Hose.

d) Order (1) each:3838441 Bracket3871253 Pulley3845648 Belt

456958 Bolt3825451 Spacer

180124 Bolt

6.509 BRACKET — PLATE—SUPPto Frame

48-55 D-D (1st Ser,)...................60-62 4/WD ..........................60-62 4/WD ..........................48-55 D-D (1st Ser.) ..................55-57 PASS..........................63-68 CORVETTE,,,,,,,,,,,,,,,,,,,,65-67 PASS . .........................68 PASS. .........................58-63 PASS. .........................60-62 Ser. 10 (exc. 4/WD),60-62 Ser. 20 (exc. 4/WD, D-D) .. , . , ... .64 PASS..........................

ORT—BOLT—WASHER—SHIM—SPACER, Ste

(cast 3687517) .....................gear mounting .....................

PLATE, strg. gear mtg. brkt. frame reinf.SUPPORT, bracket ...................BOLT ( 3%s -24 x 3'/e) (round hd. sq. neck)BOLT ( 3/8 -24 x 4

14) (round hd. sq. neck).

BOLT, (/ 6 -14 x 4'/ 6) .................BOLT

('/6-14 x 4'/6) .................

WASHER(13/37) .......................

WASHER, ('/8 O.D. x '/ 6 thk.) , , , . , , , , , ,WASHER ( 134 2

x 1 /4 x / thk.)...........

ering Gear

3687517 1 6.702386739 1 12.852390790 1 1.003687518 1 4.053743308 3 .153820342 A.R. .159419714 3 (8.900)

399803 13754153 A.R.(5.383)

3702807 A.R.(4.228)333066 2 (1.270)

©-1967Chevrolet Motor Division 6.508-6.509


65-67 PASS . ......................... WASHER ( 15/z I.D. x 1'/8 O.D.—Y1 6 thk.) , 1193463 3 .1855-57 PASS . ......................... SHIM, mounting ( 15/ 6 x 1°/ 6 X

1i3 R thick). A.R.(6.163)58-64 PASS .......................... SHIM, mounting (1 x 3 13/3, x .029 thk.) .. 3745247 A.R. .0560-61 CORVETTE .................... SHIM (1 Y/ x 1'/ 6 x 0.60 thk.)............ 3766086 A.R.(8.015)58-62 CORVETTE .................... SPACER, frame (cast Front) ........... 3711388 1 1.94

6.512 COVER ASSY.—HUB ASSY —HOUSING—PLATE—EXTENSION—SHROUD,Steering Wheel Hub

NOTE: Direction signal housings are in 2.906 group.

53-54 PASS.,54-59 Ser. 3,60-62 D-D (exc. 102 W.B.) ............. (w/o signal lever hole).............. 3701357 1 .66

60 Ser. 10-20 w/P.G. (exc.directionalsignal) ............. (w/wire) .......................... 899530 1 3.35

63-66 CORVETTE (exc. Tel. W.) ....... HUB ASSY ........................... 3828382 1 7.9564-66 PASS. w/wood grain wheel ....... HUB ASSY., plastic .................. 3845286 1 5.7565-66 CORVETTE w/Tel. W............ HUB ASSY .......................... 3863902 1 4.6067 PASS. w/wood grained plastic .... HUB ASSY ........................... 3901310 1 5.9567 CORVETTE,68 CORVETTE w/Tel. W ........... HUB ASSY ........................... 3900579 1 5.9568 CORVETTE (exc. Tel. W.) ....... HUB ASSY ........................... 3913850 1 4.9560 Ser. 10 thru 30 (exc. P.G., dir.

signal) ....................... HOUSING, cover ..................... 5951000 1 2.2561 Ser. 10 thru 30 (exc. D-D, P.G.,

dir. signal),61-62 Ser. 10 (D-D) (exc. P.G.,

dir. signal) ................... HOUSING, cover..................... 59525380 1 3.0055-56 PASS.,60-62 Ser. 10 thru 30 (exc. D-D),61-62 Ser. 10 (D-D) ................... PLATE, cover locking (1 1/ I.D. x 1^/e63 4/WD (1st Ser.) ................. O.D.) ............................. 3713031 1 .1466 PASS. w/T.W . .................. EXTENSION, cup shaped (3Y deep x 4%

O.D.) ............................. 3881759 1 1.1867 PASS . ........................ SHROUD, chrome.................... 9745922 1 8.9567 BISCAYNE, BEL AIR............ SHROUD ............................ 9746129 1 7.5068 PASS. w/del. wheel ............. SHROUD, (black)..................... 9748925 168 PASS. w/del. wheel ............. SHROUD, (blue)...................... 9748926 168 PASS. w/del. wheel (exc.

STA. WAG.) .................. SHROUD, (gold)...................... 9748927 168 PASS. w/del. wheel (exc.

STA. WAG.) .................. SHROUD, (teal) ...................... 9748928 168 PASS. w/del. wheel (exc.

STA. WAG.) .................. SHROUD (red) ....................... 9748929 168 STA. WAG. w/del. wheel ......... SHROUD, (saddle) .................... 9748930 168 PASS. w/del. wheel (exc.

STA. WAG.) .................. SHROUD, (green)..................... 9748931 168 PASS. w/del wheel .............. SHROUD, (turq.) ..................... 9748932 168 PASS. (exc. del. wheel) .......... SHROUD . ........................... 9748153 1 8.50

6.513 WHEEL ASSEMBLY, Steering

NOTE: For Horn Ring see group 2.830, for Horn Cap see group 2.820.

PASSENGER

53-54 B, C...........................53-54 A, D...........................55 B (exc. CLUB CPE.),55 B (exc. STA. WAG.),55 -56 A, SDL ........................56 B,58-60 IMPALA, NOMAD ...............55-56 C .............................

57 A,D ...........................57 B,C ...........................58 DELRAY, YEOMAN,59 BISCAYNE (exc. UTIL. SED. SDL.),59 BROOKWOOD, PDL. (exc. 4-DR.)

(onyx black and india ivory) (w /o cap) 759206 1 20.75(india ivory) (w/o cap) .............. 3709908 1 14.85

(black) ........................... 759953 1 20.75

(black) (w/o cap) ................... 765452 1 25.90(black) (w/o cap) ................... 760441 1 23.25(silver) .......................... 761635 1 16.50(silver) .......................... 761430 1 23.25

(gunmetal) ......................... 762402 1 16.05

6.509-6.513 J-1967Chevrolet Motor Division


58-59 BISCAYNE, DELRAY, YEOMAN,BROOKWOOD................. (dark blue) ........................ 762861 1 22.60

58 BISCAYNE, DELRAY, YEOMAN,BROOKWOOD,

59 PASS. (exc. NOMAD, IMPALA).... (gunmetal) ......................... 762229 1 22.6058 BISCAYNE, BROOKWOOD ........ (dark turquoise) .................... 762859 1 22.6058 BEL AIR, NOMAD ............... (gold) ............................. 762873 1 22.6058 BEL AIR, NOMAD ............... (gunmetal)......................... 762427 1 22.6058 IMPALA (exc. SPT. MDLS.) ...... (dark turquoise) ..... ...... 762871 1 22.6058 BEL AIR, NOMAD,59 PASS.exc. IMPALA, NOMAD).( ) .(dark green) .............. . . . . . . . 762867 1 2260.58 BEL AIR, NOMAD,59 BEL AIR, PARKWOOD,

KINGSWOOD.................. (dark coral) ........................ 762991 1 22.6058 YEOMAN,60 BISCAYNE, BROOKWOOD, PDL.

(exc. deluxe wheel)............ (medium gray) ...................... 764218 1 16.0559 BISCAYNE, BROOKWOOD, PDL. w/o horn ring (medium gray) ......... 763494 1 16.0559 IMPALA, NOMAD ............... (medium gray and light gray) ......... 763190 1 25.9060 BISCAYNE, BROOKWOOD, PDL.

w/deluxe wheel,60 BEL AIR, PARKWOOD,

KINGSWOOD.................. (medium gray)...................... 770228 1 24.7560 BISCAYNE, BROOKWOOD, PDL.

w/deluxe wheel (exc. UTIL.SED., SDL.),

60 BEL AIR, PARKWOOD,KINGSWOOD.................. (medium blue)...................... 765434 1 23.30

60 BEL AIR, PARKWOOD,KINGSWOOD.................. (medium turquoise) ................. 765432 1 23,30

61 BISCAYNE, BROOKWOOD,62 BISCAYNE (exc. deluxe wheel) ... (black) w/o horn ring ............... 768796 1 16.0561 BISCAYNE, BROOKWOOD (exc.

FLEETMASTER) .............. w/o horn ring (dark gray) ............ 765741 1 16.0561-62 BISCAYNE, BROOKWOOD

w/deluxe wheel,61-62 BEL AIR, PARKWOOD........... (dark gray) ........................ 768789 1 24.5061 IMPALA, NOMAD ............... (med. gray) ........................ 765980 1 27.1561 IMPALA, NOMAD ............... (med. turquoise) .................... 766478 1 27.1561 IMPALA, NOMAD ............... (med. dark fawn) ................... 766479 1 27.1562 BISCAYNE (exc. deluxe wheel) ... (dark red) ......................... 768117 1 16.0562 IMPALA ....................... (dark gold and light gold)............ 9740556 1 14.8562-63 IMPALA,62-63 SUPER SPORT ................. (black)............................ 769968 1 18.3563 BISCAYNE (exc. deluxe wheel) .... (dark fawn) ........................ 769930 1 14.7563 BISCAYNE (exc. deluxe wheel) ... (dark aqua) ........................ 769931 1 14.7563 BISCAYNE (exc. deluxe wheel) .... (med. red) ......................... 769932 1 14.7563 BISCAYNE w/deluxe wheel,63 BEL AIR ....................... (dark fawn)........................ 769946 1 15.4063 BISCAYNE w/deluxe wheel,63 BEL AIR ....................... (dark aqua)........................ 769947 1 15.4063 BISCAYNE w/deluxe wheel,63 BEL AIR ....................... (med.red)......................... 769948 1 1.540.63 BEL AIR ....................... (dark blue) ........................ 769949 1 15.4063 BEL AIR ....................... (dark green) ....................... 769950 1 15.4064-65 PASS., TAXI ................... w/horn button (med fawn)............ 9742407 1 17.3564-66 PASS. w/wood grain wheel ....... plastic (walnut) (16Y2 O.D.) .......... 9741033 1 41.4067 PASS. w/wood grain ............. plastic (walnut) .................... 9746195 1 48.9567 PASS . ......................... w/horn ring (medium blue ............ 9747741 1 21.5068 PASS. w/wood grain ............. plastic (walnut).................... 9748390 1


1964

AQUA& BLACK&BLACK RED AQUA GREEN SADDLE FAWN BLUE WHITE SILVER

BISCAYNE, BEL AIR 9741948 9740411 9740414 9740410 9740413 16.00I MPALA, S.S. 9740631 9740629* 9740628 9740632 9740633 9740627 9740630 9740635 9740636 18.95

*NOTE: DARK RED. For MEDIUM RED use 9741949.For RED & WHITE use 9741996.

1965

AQUA& TWO TONEBLACK RED AQUA GREEN SADDLE FAWN BLUE WHITE GRAY

BISCAYNE, BEL AIR 9742420 9742419 9742422 9742418 9742421 16.00IMPALA 9742438 9742431 9742434 9742437 9742433 9741881 9742432 9742435 9742436 18.95

1966

LT. MED. BR. MED.BLACK RED TURQUOISE GREEN BRONZE FAWN FAWN BLUE BLUE

BISCAYNE, BEL AIR 3881728 3881729 3881726 3881727 16.00IMPALA, CAPRICE 9742438 3878390 3878388 3878389 3878393 3878383 3878385 3882986 3878384 18.95PASS. w/Tel. IX'. 3884891 3884888 3884889 3884890 3884893 3884892 3884886 3884894 3884887 20.95

1967

B R T.BLACK BLUE TURQUOISE FAWN MAROON RED PLUM BLUE GOLD

PASS. (exc. DELUXEWhI) 9746186 9746184 9746185 9746183 16.75

PASS. (w/DELUXEWhl) 9746436 9746439 9746437 9746731 9746440 9746441 9746723 9746442 9746438 17.50

1968

GRAYBLACK BLUE GOLD TEAL RED SADDLE GREEN TURQUOISE

PASS. (exc. DELUXEWhI. 9747568 9747569 9747570 9747572 9747571 17.50PASS. w/DELUXEWh1. 9747536 9747537 9747538 9747539 9747540 9747541 9747542 9747543 18.25

CORVETTE

56-62 CORVETTE .................... (black) ............................ 764756 1 44.2062 CORVETTE .................... (med. fawn)........................ 767170 1 44.2063 CORVETTE .................... (black) ............................ 770859 1 46.1063 CORVETTE .................... (red) .............................. 770860 1 46.1063 CORVETTE .................... (med. saddle) ...................... 770861 1 46.1063 CORVETTE .................... (dark blue) ........................ 770862 1 46.1063-66 CORVETTE .................... plastic (walnut grained) ............. 9740603 1 48.9564-66 CORVETTE .................... (wood).................... ....... 9742156 1 72.4567 CORVETTE . ................... plastic (walnut) .................... 9746195 1 48.95

TRUCK

47-53 COMM., UTIL ..................."

(gray)...............""" 756084 1" " 13.5054-56 Ser. 3,

54-55 UTIL. (1st Ser.) ................. (gray) (w/o cap).................... 758625 1 15.5057-59 Ser. 3,60-62 D-D (exc. 102 W.B.) ............. (charcoal) ......................... 761141 1 15.4058-59 Ser. 3A-3B (PICK-UP) ........... (gold metallic) ..................... 763561 1 14.8061-64 Ser. 10 thru 30 w/deluxe equip.

(exc. D-D ) .................... (silver) ........................... 770228 1 24.75

6.513 ©- 1 967Chevrolet Motor Division


16.5016.50

20.25

19.45

16.50

14.9516.5019.3015.8016.7514.9514.9514.9514.9514.95

14.9516.2516.2516.2516.25

16.2519.3016.2519.3019.3016.25

1111

5679662 1 1.085678594 1 1.035697496 1 1.035697497 1 1.655693427 1 1.185698395 1 1.25

5698603 1 1.35

78010373782965384957938325675 6983 965676787567652556934185698998569841056984155676937

1.60(2.897)(2.897)

.923.50.70.61.61

1.00.50.75.30

6.513-6.514

61-64 Ser. 10 thru 30 (exc. deluxeequip., D-D) .................. (white) ............................ 768172

61-66 Ser. 10 (D-D) .................... (silver) ........................... 766630**NOTE: When using 766630 17 11 O.D. wheel in place of 3889936 16.50" O.D. wheel

also order horn button cap 764122.63-67 Ser. 20-30 (D-D) ................ (white) (19")...................... 76817564-66 Ser. 10 thru 30 w/deluxe equip.

(exc. D-D, FFC) .............. (med.fawn)........................ 9742216t64-66 Ser. 10 thru 30 (exc. deluxe equip.,

D-D) ........................ (med.fawn)........................ 974221064-65 G-10,65 Ser. 10 (4/WD),66 G-10 (DELUXE) ................. (med.fawn)........................ 9742209165-66 G-10, ... ... ............. (charcoal) ......................... 974352165 G-10 (SUB. DELUXE) ............ (white and eengr' ) ................... 76828365 G-10 (SUB. DELUXE)............ (white and turquoise) ............... 974395865 G-10 (SUB. DELUXE)............ (white and red) .................... 974395665 G-10 (DELUXE) ................. (med. fawn and white)............... 974395966 G-10 (DELUXE) ................. (red).............................. 3888972166 G-10 (DELUXE) ................. (green)............................ 3888971166 G-10 (DELUXE) ................. (turquoise) ........................ 3888970166 Ser. 10 (exc. deluxe equip., D-D) , . (med. fawn) ........................ 3889935166 Ser. 10 thru 30 w/deluxe equip.,66 Ser. 20 w/Camper Equip.......... (med. fawn) ........................ 388999267-68 Ser. 10 thru 30 (CAB) (SUB) ...... (blue) (16 1/") ...................... 974614667-68 Ser. 10 thru 30 (exc. D-D) ........ (fawn) (16'/ ?t ) ...................... 974614367-68 Ser. 10 thru 30 (CAB) (SUB) ...... (green) (16") ..................... 974614567-68 Ser. 10 thru 30 (CAB) (SUB) ...... (red) (16'/") ....................... 974614467 Ser. 10 (D-D),68 Ser, 10 thru 30 (D-D) ............. (silver)... ........................ 974668567-68 G-10-20 (DELUXE) .............. (red).............................. 974664567-68 G-10-20 (DELUXE) .............. (fawn) ............................ 974664467-68 G-10-20 (DELUXE) .............. (blue)............................. 974664667-68 G-10-20 (DELUXE) .............. (green)............................ 974664767-68 G-10-20 (exc. DELUXE).. (charcoal) ......................... 9746643

tNOTE: Does not include horn blowing parts.

6.514 SHOE-SHOE ASSY. and PARTS, Til t S teering Col umn

63-66 PASS..........................66 PASS . .........................67-68 PASS. .........................67-68 PASS. .........................63-66 PASS ......................... .63-66 PASS . .........................66 PASS. w/4-SPD . ............... .66 PASS. w/P.G . ..................66 PASS. w/T.H . ..................67-68 PASS. .........................67 PASS. .........................63-65 PASS. w/4-SPD.,63-65 SUPER SPORT w/P.G. ..........63-64 PASS. w/P.G. (exc. S.S.).........65-66 PASS. w /P. G. (exc. S.S.) .........65-66 PASS. (exc. S.S.) ................66 PASS . .........................67-68 PASS. .........................67-68 PASS. (w/O.D., 3-speed, floor

shift) (exc. T.W.) ..............67-68 PASS. (w/A.T., column shift) (exc.

T.W.) ........................63-65 PASS . .........................65-66 CAPRICE ......................63-68 PASS. .........................67-68 PASS. .........................63-66 PASS..........................63-66 PASS..........................66 PASS . .........................67 PASS . .........................67-68 PASS. .........................67-68 PASS. .........................63-66 PASS. w/P.G. (exc. S.S.).........

-1967Chevrolet Motor DivisionGeneral Motors Corporation

PLATE, lock ........................PLATE, lock ........................PLATE, lock ........................PLATE, lock ........................PLATE, lock ........................PLATE, strg. col supt. lock ...........

PLATE, shift detent and housing lock

PLATE, shift detent and housing lockKNOB, release lever ..................KNOB, release lever ..................LEVER, wheel release ................LEVER, shoe, release ................SPRING, steering column tilt ..........SPRING, lock shoe ...................SPRING, lock shoe ...................SPRING, shoe rtn .....................SPRING, shoe rel .....................SPRING, tilt.........................WASHER, lock plate wave .............

963

lower lock ......................... 5677216 1 6.15lock.............................. 5693432 2 6.15column lock, (3 position)............ 5698425 1 8.20column lock (4 position) ............. 5698426 1 8.20

SHOE ASSY., upper lock .............. 5679619 1 5.95SUPPORTASSY ...................... 5678528 1 3.30SUPPORTASSY ...................... 5695207 1 5.90SUPPORTASSY ...................... 5695311 1 6.55SUPPORTASSY ...................... 5696186 1 6.55SUPPORT ASSY., strg. col............ 5698649 1 9.35SUPPORT ASSY., strg. col. ........... 5698847 1 7.95

63-66 PASS. w/P.G. (exc. S.S.)......... WASHER, shift lever hsg. thrust........ 5676941 1 .3066 PAS S . ......................... WASHER, lock plate wave ............. 5676161 1 .1567 PASS . ......................... WASHER, strg. column supt asm. wave .. 5699618 167 PASS . ......................... WASHER, column supt. thrust .......... 5698413 167 PASS . ......................... WASHER, shaft centering sphere ....... 7800979 1 .2063-66 PASS .......................... PIN, pivot........................... 5676496 2 .5063-66 PASS . ......................... PIN, lock shoe dowel................. 5677922 2 .3566-68 PASS . ......................... PIN, pivot ........................... 5693411 1 .5667-68 PASS . ......................... PIN, shoe rel. ....................... 5698688 1 .4567-68 PASS . ......................... PIN, shoe rel. lever ........., ..... 5698406 1 .3063-66 PASS . ......................... SCREW, supt. attaching (#8-32 x 'e) .... 5677852 2 .2563-66 PASS . ......................... SCREW, strg. column support (10-32

x1Y4 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5678513 2 .1066 PASS . ......................... SCREW, strg. column support .......... 5693410 4 .2867-68 PASS . ......................... SCREW, column supt. asm. ............ 5698404 4 .3066 PASS . ......................... SPHERE, shaft centering.............. 5697528 2 .7067-68 PASS . ......................... SPHERE, shaft centering.............. 7801021 2 .6067-68 PASS . ......................... RETAINER, spring ................... 7800177 1 .3563-65 PASS. w/ T.W . .................. HOUSING ASSY., w/actuator, turn signal 5679582 1 27.1566 PASS. (T.W. w/Tel. W.) .......... HOUSING ASSY., w/actuator, turn signal 5694942 1 27.1567-68 PASS . ......................... HOUSING ASSY., shaft bearing......... 5698742 1 32.00

6.515 WASHER-CLIP-RING-NUT-BUMPER, Steering Wheel

47-48 COMM., UTIL.,49-63 ALL, CORVETTE (exc. Ser.

10 D-D),65-67 CORVETTE w/Tel. W............ hub ( 19

/37 I. D. x 15/ 6 O.D.) ............ 3905522 1 .05

ALLALL .......................... (17/32 I.D. x 15/, O.D. x '/32 thick) ...... 415919 A.R. .05

58-60 IMPALA,59-60 NOMAD ........................ CLIP, rim trim (chrome)............... 762321 4 .6161 IMPALA, NOMAD,62-63 IMPALA ....................... RING, rim trim (chrome)............... 766981 4 .4764-65 IMPALA ....................... RING, rim trim (chrome)............... 9740637 4 .37ALLALL ........................... NUT, hub ( Y-20) .................... 124934 1 (8.916)66 PASS . ......................... BUMPER ............................ 5693412 1 •33

6.516 KNOB-SCREW-BUMPER-ROD-PLATE-STOP_SPRING-WASHER-

SUPPORT-SPACER - LEVER, Telescopic Steering Whee l

65-66 CORVETTE .................... strg. shaft lock .................... 3863913 1 1.5066 PASS . ......................... strg. shaft lock .................... 3881774 1 1.5067 CORVETTE .................... strg. column lock .................. 3910762 1 2.9568 CORVETTE .................... strg. column lock ................... 3931817 165-68 CORVETTE .................... SCREW, strg. shaft lock knob .......... 3863914 1 1.1566 PASS . ......................... BUMPER, strg. shaft upper ............ 5697720 1 1.1865-66 CORVETTE .................... BUMPER, strg. shaft lock knob ........ 3863917 1 .0566 PASS . ......................... BUMPER, strg. shaft lock knob ........ 3881779 2 .0565-66 CORVETTE ................... ROD, strg, column upr. shaft lock ...... 5694189 1 2.2666 PASS . ......................... ROD, strg. shaft lock ................. 5697431 1 .5167-68 CORVETTE .................... ROD, strg. shaft lock ... , ... , ....... 7800419 1 3.9565-66 CORVETTE .................... PLATE, strg. column shaft bearing ret. . 5694261 1 .4265-66 CORVETTE .................... STOP, strg. column inner jacket........ 5694806 1 .8065-66 CORVETTE .................... SPRING, strg. column inner jacket stop , 5694641 1 .4065-66 CORVETTE .................... WASHER, strg. column inner jacket stop

(3/a I.D. x 1%64 O.D.-plastic) ......... 5694658 1 .35

66 PASS . ......................... SUPPORT, horn bottom cap retainer .... 3881758 1 (2.820)67 CORVETTE (w/Tel. Whl.)........ SPACER, strg ........................ 3910763 1 1.7568 CORVETTE .................... LEVER, strg. column lock............. 3923677 1 3.25

6.518 JACKET-JACKET ASSY.- COLUMN ASSY.-TUBE-TUBE ASSY.-SUPPORTASSY.-COVER-COVER ASSY.- SHROUD -EXTENSION -WEDGE-HOUSING-HOUSING ASSY.-BUMPER ASSY.-STRAP-SEAT- WASHER-BRACKET, Mast(also see group 6.803)

41-46 COMM., UTIL. (exc. COE) ........ (4113/64) • • . • . • • • • • • • • • . • ............ 3657981 1 5.4047 COMM., 1 1

4 TON (exc. SBC),48-53 COMM., UTIL. w/4-SPD.

(exc. D-D, SBC, 2 TON)........ (w/top cover) (40 Y4) ................. 270278 1 6.95

6.514-6.518 ©-1967Chevrolet Motor Division


48-53 '/, 3/4 TON w/3-SPD.) (exc. D-D)... (w/top cover) (40

1/4) ................. 5660013 1 6.95

54-55 COMM., 1'/Z TON (1st Ser.) (exc.D-D, SBC),

54-55 COMM. w/deluxe equip. (1st Ser.)(exc. H.T., H.D.) .............. w/top cover (39 1 % 6 O.L.)............ 5665293 1 6.95

55-56 PASS. w/P.G . .............. . (313/32 O.L.) ........................ 3729479* 1 6.75*NOTE: When using on jobs with '/4 dia bolts at base of jacket, 3726438 Ring,

3728056 Spacer, 181587 Bolt and 138485 Washer must be used.55-56 PASS. (exc. P.G.) ............... (31/32 O.L.) (driftwood gray) ... ..... 3726435t 1 6.75

tNOTE: When using on 1955 jobs Ring 3726438 Spacer 3728056 Bolt 181587(8.900) and Washer 138485 (8.932) are required.

57 PASS. (exc. A.T.) ............... (31/32 O.L.) ........................ 3752033 1 7.5057 PASS. w/A.T . .................. (313/32 O.L.) ........................ 3752034 1 75058 PASS . ......................... (29% O.L.) ........................ 3756113 1 6.5559-60 PASS ........................... (30'/8 O.L.) ........................ 3760039 1 6.7561-62 PASS ........................... (29'/4 O.L.) ......................... 3814593 1 5.9563 CORVETTE ................... (284 O.L.) ........................ 3824102 1 5.8063-64 PASS. (P.G. w/T.W.) (exc.

SUPERSPORT) .............. (2644 O.L.) ....................... 5678593 1 13.1563-64 PASS. (4-SPD. w/T.W.),63-64 SUPER SPORT (P.G. w/T.W.) .... (2639/64 O.L.) ....................... 5678595 1 12.0564-66 CORVETTE (exc. Tel. W.)....... (27'32 O.L.) ........................ 3866469 1 7.4563-64 PASS. (exc. T.W.) .............. (29 17

4 O.L.) ...................... 38231198 1 5.8065 PASS. w/3-SPD . ................ (28/64 O.L.) ....................... 3872055 1 5.9065-66 PASS. w/A.T. (exc. T.W., S.S.) . .. (283%4 O.L.) ....................... 3859847 1 5.8065-66 PASS. w/4-SPD. (exc. T.W.),65-66 IMPALA (S.S.I w/P.G. (exc. T.W.). (2833/64 O.L.) ....................... 3861800 1 5.8065 BISCAYNE, BEL AIR

w/P.G. (exc. T.W.)............ (29Y32 O.L. ) ........................ 3864543 1 5.6065-66 PASS. (P.G. w/T.W.) (exc. S.S.). .. (2535/ O.L.) 5694252 1 13.5565 PASS. (T.W. w/4-SPD.) (exc. S.S.),65 IMPALA (S.S.) w/T.W. ........... (25°/6 O.L.) ........................ 5694297 1 12.7566 PASS. w/3-SPD ................. (28/64 O.L.)....................... 3888737 1 5.8066 PASS. (T.W. w/P.G., T.H.) ....... .................................... 5696903 1 13.5567 Ser. 10-30 (exc. D-D),67 Ser. 10 (D-D),68 Ser. 10-20 w/P.G ........ ... .................................... 3904719 1 5.2067 Ser. 10-20 (w/T.H.) (exc. D-D) .... .................................... 3906553 1 4.2568 Ser. 10 thru 30 (exc. A.T.)........ 315/32 O.L.) ........................ 3919489 1 5.4560-62 Ser. 10 thru 30 (exc. D-D),61-62 Ser. 10 (D-D),63 4/WD (1st Ser.) ................. JACKET ASSY....................... 38291238 1 5.40

ANOTE: When using on 1963 models it will be necessary to straighten 3 tangsand drill 2 additional holes for clamp at end of jacket.

63-66 Ser. 10 thru 30 .................. JACKET ASSY....................... 3867829t 1 5.20tNOTE: When using 3867829 with P.G. straighten 3 tangs and drill 2 holes

in end of mast jacket for clamp.64-67 Ser. 20-30 (D-D) ................. JACKET ASSY....................... 3848639 1 7.9564-66 G-10 ........................... JACKET ASSY....................... 5692527 1 12.2565-66 CORVETTE w/Tel. W ........... JACKET ASSY., inner & outer ......... 5696386 1 18.3567 CORVETTE (exc. Tel. W.) (1st

design) ...................... JACKET ASSY....................... 5699521 1 23.5067 CORVETTE (exc. Tel. W.) (2nd

design) ...................... JACKET ASSY....................... 7802118 1 19.7567-68 PASS. w/T.W . .................. JACKET ASSY....................... 5699938 1 10.5067-68 PASS. (exc. T.W.) ............... JACKET ASSY....................... 5699815 1 8.7567 CORVETTE w/Tel. W............ JACKET ASSY ....................... 7800509 1 47.5067-68 G-10-20 (exc. 4-SPD.)............ JACKET ASSY ....................... 3888953 1 12.2568 PASS. w/A.T., column shift (exc.

T.W.) ........................ JACKET ASSY....................... 7803008 168 CORVETTE (exc. Tel. W.) ....... JACKET ASSY . ...................... 7804030 168 CORVETTE w/Tel. W............ JACKET ASSY . ...................... 7804076 168 PASS. w/T.W. floor shift ......... JACKET ASSY . ...................... 7803274 167 PASS. (w/O.D., H.D. 3-SPD.)

(1st design) .................. COLUMN ASSY....................... 5698339 1 49.5067 PASS. (w/A.T., columnshift) (exc.

T.W.) (1st design) ............. COLUMN ASSY....................... 5698338 1 49.5067 CORVETTE (exc. Tel. W.) (1st

design) ...................... COLUMN ASSY....................... 5698346 1 56.5067 CORVETTE (exc. Tel. W.) (2nd

design) ...................... COLUMN ASSY....................... 7803156 1 56.5067 CORVETTE w/Tel. W. (1st design) COLUMN ASSY ....................... 5699524 1 105.00

0--1967Chevrolet Motor DivisionGeneral Motors Corporation 965

6.518

1 105.00

1 56.50

1 98.50

1 98.50

1 49.501 98.50

1 49.50

1 49.50

1 98.50

1 49.50

1 49.5011 42.381 105.00

67 CORVETTE w/Tel. W. (2nd design) COLUMN ASSY ....................... 780328067 CORVETTE (exc. Tel. W.) (3rd

design) ...................... COLUMN ASSY....................... 780315667 PASS. w/T.W., A.T., columnshift)

(1st design) .................. COLUMN ASSY....................... 569882667 PASS. (w/T.W., floor shift) (1st

design) ...................... COLUMN ASSY....................... 569882767 PASS. (w/floor shift) (exc. T.W.)

(1st design) .................. COLUMN ASSY....................... 569834067 PASS. w/T.W., A.T. (2nd design) . COLUMN ASSY ....................... 780361167 PASS w/A.T. columnshift (exc.

T.W.) (2nd design) ............. COLUMN ASSY....................... 780360068 PASS. w/floor shift (exc. T.W.)

(2nd design),68 PASS. w/floor shift (exc. T.W.) ... COLUMN ASSY .. ..................... 780352667 PASS. w/T.W., floor shift (2nd

design),68 PASS. w/T.W., floor shift ........ COLUMN ASSY ....................... 780352767 PASS. w/3-SPD. column shift

(2nd design),68 PASS. w/3-SPD. column shift ..... COLUMN ASSY ....................... 780356768 PASS. w/A.T. column shift (exc.

T.W.) ........................ COLUMN ASSY ....................... 780377368 PASS. (A.T. w/T.W.) ............ COLUMN ASSY ....................... 780377468 CORVETTE (exc. Tel. W.) ....... COLUMN ASSY ....................... 780390968 CORVETTE w/Tel. W............ COLUMN ASSY ....................... 780391058-67 PASS. w/4-SPD. (exc. T.W.),60-65 Ser. 10-20 w/4-SPD. (exc. D-D),61-65 Ser. 10 (D-D) w/4-SPD.,63-64 SUPER SPORT w/P.G. (exc. T.W.),65-66 PASS. (8 cyl.) w/T.W. ........... TUBE, directional signal housing filler 388643958-66 PASS. w/4-SPD., (exc. T.W.),60-62 ALL w/4-SPD. (exc. CORVETTE,

D-D),61-65 Ser. 10 (D-D),63 Ser. 10 thru 30 w/4-SPD. (exc. D-D),63-64 S.S. w/P.G. ( exc. T.W.),64-65 Ser. 30 (exc. H.D., D-D, 4/WD). . . TUBE, mast jacket filler .............. 383993663-65 PASS. w/4 SPD., (exc. T.W.),63-64 IMPALA (SUPER SPORT) w/P.G.

(exc. T.W.),65 PASS. (8 cyl.) (exc. T.W.) ........ TUBE, jacket filler ................... 384125867 PASS. w/T.W. (1st design) ....... TUBE ASSY., column filler............ 790069367 PASS. (w/floor shift) (exc. T.W.)

(1st design) .................. TUBE ASSY., column filler ............ 569981167 PASS. w/floor shift (exc. T.W.)

(2nd design),68 PASS. w/floor shift (exc. T.W.) ... TUBE ASSY., column filler............ 780366867 PASS. w/T.W., floor shift (2nd

design),68 PASS. w/T.W., floor shift ........ TUBE ASSY., column filler............ 780368760-62 Ser. 10,60-62 Ser. 20-30 (exc. D-D),63 4/WD (1st Ser.) ................. SUPPORT ASSY., jacket .............. 376380563-66 4/WD (2nd Ser.), D-D (102 W.B.),63-66 Ser. 10 thru 30 (exc. D-D, 4/WD,

FFC) ........................ SUPPORT ASSY., jacket .............. 382302367-68 CORVETTE .................... SUPPORT ASSY., upper strg. shaft brg.

£w sig. sw .......................... 780001659-60 PASS. w/4-SPD.,60-65 Ser. 10 thru 30 w/4-SPD. (1st

design) (exc. D-D.),61-65 Ser. 10 (D-D) w/4-SPD. (1st

design),65 Ser. 30 w/3 SPD. (1st design) (exc.

H.D., D. D.) ................... COVER, steering gear jacket upper ..... 376738560-62 Ser. 10 thru 30 (exc. D-D),63 Ser. 10-20 (4/WD) (1st Ser.) ....... COVER, column jacket ................ 376856260-67 Ser. 10 thru 30 w/4-SPD.

(exc. D-D),65-67 Ser. 10 (D-D) w/4-SPD. .......... COVER, column jacket lower .......... 3769312

6.518

966

1

1 1.16

1 1.161 11.25

1 8.25

1 8.50

1 8.25

1 1.80

1 1.80

1 5.25

1 2.31

1 .60

1 .15

©-1967Chevrolet Motor Division


60-62 Ser. 10 thru 30 (exc. D-D),63 Ser. 10-20 (4/WD) (1st Ser.) ....... COVER, column jacket ................ 3768562 1 .6060-67 Ser. 10 thru 30 w/4-SPD.

(exc. D-D),65-67 Ser. 10 (D-D) w/4-SPD. .......... COVER, column jacket lower .......... 3769312 1 .1554-55 D-D,

57 1 TON,57-58 '/2 , '/4 TON w/4-SPD.,60-62 D-D ........................... COVER, used to plug holes in strg gear67 Ser. 30 (D-D) ................... mast jacket (1^/4 x 9/ 6 rubber) ........ 1455658 A.R.(5.117)61-62 PASS. w/4-SPD.,63 PASS. (4-SPD. w/P/S) (exc. T.W.),63 IMPALA (S.S.) (P.G. w/P/S

(exc. T.W.) ................... COVER, steering gear jacket upper ..... 3795141 1 2.6563 PASS. w/T.W . .................. COVER, switch actuator .............. 5678128 1 1.9363-64 PASS. (P.G. w/T.W.) (exc.

SUPER SPORT) ............... COVER, strg. column inst. panel ....... 5678465 1 8.1565-66 PASS. w/4-SPD. (exc. T.W.),65-66 PASS. (A.T.) w/B.S. (exc. T.W.) .. COVER, steering gear jacket upper ..... 3861839 1 2.5465-66 Ser. 10-30 w/4-SPD. (2nd design)

(exc. D-D),65-66 Ser. 10 (D-D) w/4-SPD. (2nd

design) .. ..................... COVER, steering gear jacket upper ..... 3873160 1 2.4563-66 Ser. 10 thru 30 (2nd Ser.) (exc.

D-D) ......................... COVER, mast jacket.................. 3848642 1 .5564-66 PASS. w/T.W ................... COVER, switch actuator .............. 5679684 1 1.9366 PASS. w/T.W . .................. COVER, steering column switch actuator 5695315 1 2.9764 PASS. w/4-SPD. (exc. T.W.) ...... COVER, steering gear jacket upper ..... 3841240 1 2.6567-68 PASS. w/T.W . .................. COVER, column switch actuator........ 7800499T 1 4.25

tNOTE: Used with Delco switch.65-66 PASS. (exc. T.W., P.G., S.S.,

CAPRICE),65 CAPRICE, SUPER SPORT

(exc. T.W.),66 S.S., CAPRICE w/floor console

w/gauges .................... COVER, strg. gear jacket upper........ 3859761 1 1.7965-66 PASS. w/A.T. (exc. B.S. T.W.).... COVER, strg. gear jacket upper........ 3859765 1 1.7965 PASS. (exc. T.W.) ............... COVER, strg. gear jacket lower........ 3859769 1 1.7965 PASS. w/T.W . .................. COVER, strg. gear jacket lower........ 3863301 1 2.3765-66 PASS. (4-SPD. w/T.W.) (8 cyl.),65-66 S.S. (P.G. w/T.W.) (6 cyl.) ....... COVER, strg. gear jacket upper........ 3863305 1 2.3765 CAPRICE (SPT. SED.) w/T.W.,65-66 PASS. (A.T. w/T.W.) (exc. S.S., B.S.) COVER, strg. gear jacket upper ........ 3863313 1 2.3766 CAPRICE (Tel. W. w/A.T.) (exc.

B.S.),66 PASS. (A.T. w/Tel. W) (exc. S.S.,

CAPRICE) ................... COVER, strg, gear jacket upper........ 3878101 1 1.7966 BISCAYNE, BEL AIR (exc. T.W.) COVER, strg. gear jacket lower........ 3887529 1 1.7566 PASS. (A.T. w/Tel. W.) (8 cyl.),66 S.S. (Tel. W. w/P.G.) (6 cyl.) ..... COVER, strg. gear jacket upper........ 3878103 1 1.7966 PASS. w/T.W. (exc. floor console

w/gauges) .................... COVER, strg. gear jacket lower........ 3887589 1 2.3766 IMPALA, CAPRICE (exc. T.W.,

floor console w/gauges)........ COVER, strg. gear jacket lower........ 3887531 1 1.6566 PASS. w/Tel. W (exc. S.S.,

CAPRICE),66 S.S., CAPRICE w/Tel. W. (exc.

floor console w/gauges)........ COVER, strg. gear jacket lower........ 3878111 1 1.7966 S.S., CAPRICE (floor console w/

gauges) w/Tel. W .............. COVER, strg. gear jacket lower........ 3878115 1 2.1866 S.S., CAPRICE (floor console

w/gauges) (exc. T.W.) ......... COVER, strg, gear jacket lower........ 3883753 1 1.7467 PASS. (exc. A.T., Strato B.S.) .... COVER, strg. gear jacket upper........ 3895141 1 .9567 PASS .......................... COVER, strg. gear jacket lower........ 3895143 1 1.1067 CORVETTE .................... COVER, strg. gear jacket lower ........ 3901945 1 .5067 CORVETTE .................... COVER, strg. gear jacket upper ........ 3901944 1 .5067 PASS. w/A.T. (exc. Strato Seats) . . COVER, strg. gear jacket upper ........ 3913689 1 1.2568 CORVETTE .................... COVER, strg. col. mesh............... 7800512 1 .8068 PASS . ......................... COVER, strg. col. mesh............... 5699613 1 .9568 CORVETTE .................... COVER, strg. gear jacket upper ........ 3914214 1 .9568 CORVETTE .................... COVER, strg. gear jacket lower ........ 3914215 1 .95


68 BISCAYNE, BEL AIR............ COVER, inst. panel strg. gear jacketupper............................. 3920367 1 .50

68 BISCAYNE, BEL AIR............ COVER, inst. panel strg. gear jacketlower ............................. 3920371 1 .75

68 IMPALA, CAPRICE ............ COVER, inst. panel strg. gear jacketupper............................. 3920369 1 .50

68 IMPALA, CAPRICE ............. COVER, inst. panel strg. gear jacketlower............................ 3920373 1 .75

68 CORVETTE ................... COVER ASSY., inst. panel lower strg.column(red) ...................... 3931504 1

68 CORVETTE ................... COVER ASSY., inst. panel lower strg.column(saddle) ................... 3931505 1

68 CORVETTE .................... COVER ASSY., inst. panel lower strg.column (med. blue) ................. 3931506 1

68 CORVETTE .................... COVER ASSY., inst. panel lower strg.column (gunmetal) .................. 3931508 1

68 CORVETTE .................... COVER ASSY., inst. panel lower strg.column(tobacco) ................... 3931509 1

68 CORVETTE .................... COVER ASSY., inst. panel lower strg.column (drk. blue) .................. 3831507 1

68 CORVETTE .................... COVER ASSY., inst. panel lower strg.column(drk. orange) ................ 3931510 1

65-66 PASS. (4-SPD. w/T.W.) (exc. S.S.),65-66 IMPALA (S.S.) w/T.W............ SHROUD, strg. column jacket.......... 5694313 1 6.6063-64 PASS . ......................... EXTENSION, jacket cover............. 3851537 1 .4266 PASS. (T.W., w/4-SPD.).......... EXTENSION, strg. gear jacket ......... 5695327 1 3.3066 PASS. w/4-SPD. (exc. T.W.),66 PASS. (A.T. w/B.S.) ............. EXTENSION, strg. gear jacket......... 3882940 1 2.7867-68 PASS. (w/T.W., Strato B.S.) ...... EXTENSION, strg. jacket ............. 7800027 1 5.5067-68 Ser. 10 thru 30 w/4-SPD. ........ EXTENSION, strg. gear jacket ........ 3902569 1 2.6067-68 PASS. w/floor shift (exc. T.W.) ... EXTENSION, strg. col. jacket ......... 5699004 1 8.0068 CORVETTE ................... EXTENSION, strg. gear jacket upper

(black) ........................... 3922081 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket lower

(black) ........................... 3922082 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket upper

(red) ............................. 3922255 1 5.5068 CORVETTE .................... EXTENSION, strg. gear jacket lower

(red) .............................. 3922557 1 5.5068 CORVETTE ................... EXTENSION, strg. gear jacket upper

(saddle) .......................... 3922259 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket lower

(saddle) .......................... 3922261 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket upper

(med. blue) ....................... 3922263 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket lower

(med. blue) ....................... 3922265 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket upper

(gunmetal) ........................ 3922267 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket lower

(gunmetal) ........................ 3922269 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket upper

(tobacco) ......................... 3922270 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket lower

(tobacco) ......................... 3922271 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket upper

(dark blue) ........................ 3922272 1 5.7568 CORVETTE ................... EXTENSION, strg gear jacket lower

(dark blue) ....................... 3922273 1 5.7568 CORVETTE ................... EXTENSION, strg. gear jacket upper

(dark orange) ...................... 3922274 1 5.7568 CORVETTE .................. EXTENSION, strg. gear jacket lower

(dark orange) ...................... 3922275 1 5.7567 PASS . ......................... WEDGE, strg. col. supt................ 1374446 1 .2667-68 PASS. (exc. T.W.) ............... HOUSING, shaft upper bearing w/brg. .. 5698375 1 5.7567-68 PASS. w/3-SPD . ................ HOUSING, shaft upper bearing ......... 7800586 1 4.5068 PASS. w/A.T. floor shift HOUSING ASSY., w/shroud gear shift

(exc. T.W.) .................. lever ............................. 7800595 167-68 CORVETTE w/Tel. W. .......... BUMPER ASSY., inner jacket stop ..... 7800411 1 1.7567-68 CORVETTE w/Tel. W. .......... STRAP, inner jacket stop bumper ...... 7801284 1 .75

6.518 -1967Chevrolet Motor Division


5660482 1 1.95262288 1 1.70

5660233 1 2.735666970 1 3.44

5672508* 1 2.26

5670037 1 2.60

5694100 1 1.35

5672192 1 2.955677819 1 1.797451325 2 1.665691182 1 (2.895)5955201 1 (2.895)5674684 2 1.455698407 1 2.505696210 1 2.507800407 1 .857802186 1 1.107800528 1 .757801324 1 1.75

7802845 1 1.757800719 1 2.755676628 1 1.605693603 1 1.51

5693941 1 2.835698422 1 4.35

3872057 1 (4.027)

67-68 Ser. 10 thru 30 w/4-SPD. (exc. D-D),67-68 Ser. 10 D-D w/4-SPD. ........... SEAT, jacket extension bush ......... 3902565 1 (4.012)67-68 Ser. 10 thru 30 w/4-SPD. (exc. D-D),67-68 Ser. 10 D-D w /4SPD ............. WASHER, jacket extension ............ 3879747 1 (4.012)68 CORVETTE ................... BRACKET, strg. column support ....... 3922429 1 17.50

6.519 SEAL-SEAL ASSY., Gear Shaft

39-40 PASS. (exc.JB),41-46 ALL (exc. COE),47-54 ALL (exc. P/S),53-61 CORVETTE,55-56 ALL ...........................57-59 Ser. 3 ..........................58-60 PASS. w/5672553-79 .............68 CORVETTE ...................58-60 PASS ..........................60-62 ALL (exc. D-D),63 4/WD (1st Ser.),63-64 PASS. (exc. T.W.) ...............63-64 PASS. w /T. W . ................. .

"O" ring, upper spring seat(

fl46 I.D. x 74 4 ) ..................... 3708146 1 (4.338)

"< O•, ring (1 5/8 I.D. x 54 4) ............. 5672489 1 .15strg. gear jacket cover ............. 3922281 1 .10

SEAL ASSY., upr. shaft ( 13/16 1. D. x YQ O.D.) 5672136 1 .23

SEAL ASSY., upper shaft,center ............................ 5690733 1 .61

6.521 BEARING ASSEMBLY and PARTS, Mast Jacket

39-48 PASS. (exc. JB),41-46 COMM., UTIL. (exc. COE) ....... upper .............................39-46 COE ........................... upper(w/packing)..................47-55 COMM., UTIL. (1st Ser.),49-54 PASS. (exc. P/S),53-62 CORVETTE .................... upper (w/cable) ....................53-54 PASS. w/P/S ................... upper (w/horn wire) .................55-62 PASS.,60-63 Ser. 10 thru 30 (exc. D-D),61-63 Ser. 10 (D-D),63 CORVETTE .................... upper (w/horn wire) .................

*NOTE: Consists of bearing and cable assy., spring and "0" ring seal. Onmodels prior to 1958 file off key on nylon upper brg. sleeve.

55-56 Ser. 3 (2nd Ser.),57 Ser. 3 (exc. SBC) ................ upper (w/horn wire) .................58-59 PASS.,60-67 Ser. 10 thru 30 (exc. D-D),61-67 Ser. 10 (D-D),63-65 CORVETTE (exc. Tel. W.),65-66 PASS. (exc. 4-SPD.),65-66 PASS. w/4-SPD. (exc. T.W.) ...... strg. shaft lower,65-66 PASS. w/4-SPD. (exc. T.W.) ...... intermediate shaft and yoke ........58-59 Ser. 3,60-62 D-D (exc. 102 W.B.) .............. upper (w/horn wire).................63 PASS. (exc. T.W.) ............... upper (w/horn wire) ................63-66 PASS. w%T.W . . ................ upper .............................63 Ser. 20-30 (D-D) ................. direction control switch .............64 ALL, CORVETTE (exc. T.W.) .... upper .............................65-66 CORVETTE w/Tel. W ........... strg. column upper shaft .............67-68 PASS. w/T.W . .................. upper strg. shaft upper ..............67-68 PASS. w/T.W . .................. upper strg. shaft lower ..............67-68 CORVETTE .................... shaft lower bearing .................67-68 PASS., (exc. T.W.) .............. strg. shaft lower ...................67-68 PASS . ......................... bowl,lower........................67-68 CORVETTE w/Tel. W. ........... strg. shaft column ..................68 Ser. 10 thru 30 (D-D) ............. strg. column inter, shaft and yoke

upper,68 Ser. 10 thru 30 (exc. D-D) ........ strg. shaft lower ...................65-66 PASS. w'T.W . .................. BEARING UNIT, upper shaft bearing....63-64 PASS. w/T.W . .................. RACE, upper shaft brg. .............. .65-66 PASS. w/T.W . .................. RACE, upr. shaft upr. bearing..........66-67 PASS. w/T.W . .................. RACE, upper shaft upper bearing,67-68 PASS. w/T.W . .................. upper shaft lower bearing ............67-68 PASS. w/T.W . .................. RACE, upper strg. upper inr. brg........60-62 Ser. 10 thru 30 w/4-SPD. (exc. D-D) RING ASSY, lower bearing61-62 Ser. 10 (D-D) ................... retaining (1'/ 6 I.D. x 1% O.D.)........

©-1967Chevrolet Motor DivisionGeneral Motors Corporation 969

6.518-6.521

63-66 PASS. w/T.W ...................67 CORVETTE w/Tel. W ,67-68 PASS., CORVETTE (exc. T.W.) ...67-68 PASS. CORVETTE (w/T.W.) (exc.

Tel. W.) ......................67-68 CORVETTE ....................39-40 PASS. (exc. JB),41-46 ALL (exc. COE),47-54 ALL (exc. P/S),53-62 CORVETTE,55-59 Ser. 3,60-67 D-D (exc. 102 W.B.) .............61-67 Ser. 10 (D-D) ...................68 Ser. 10 thru 30 (D-D) .............63-64 PASS. w/T.W . ..................

65-66 PASS. (exc. T.W.) ...............65-67 CORVETTE w/Tel. W ............67-68 PASS., CORVETTE (exc. T.W.) ...65 CORVETTE w/Tel. W. (1st design).65-66 CORVETTE w/Tel. W. (2nd design)60-62 ALL (exc. D-D),63 4/WD (1st Ser.),63-64 PASS. (exc. T.W.) ..............63-64 w/T.W . ........................67-68 CORVETTE w/Tel. W ............67-68 PASS. (exc. T.W.) ...............67-68 PASS . .........................61-67 Ser. 10 (D-D),68 Ser. 10 thru 30 (D-D) .............63-64 PASS. w/T.W . ..................63-64 PASS. w/T.W . ..................

65-66 PASS. w/T.W . .................

65-67 CORVETTE w/Tel. W ...........67-68 CORVETTE w/Tel. W ............67-68 CORVETTE ....................67-68 Ser. 10 thru 30 (exc. D-D) ........63-66 CORVETTE (exc. Tel. W.) .......63-64 PASS. w/T. W . ................. .65-66 PASS. w/T.W ...................66 PASS. w/T.W . ..................67-68 PASS. w/T.W . ..................67-68 G-10-20 ........................67-68 CORVETTE (exc. Tel. Wheel)61-67 Ser. 10 (D-D) ...................65-66 PASS. w/T.W . ................. .67-68 PASS. w/T.W . ..................65 Ser. 10 thru 30 ..................65 .66 CORVETTE w/Tel. W...........67 CORVETTE w/Tel. W. (1st

design) ......................67-68 CORVETTE w/Tel. W. (2nd design)59-64 PASS. (exc. T.W.),60-63 Ser. 10 thru 30 (exc. D-D),61-63 Ser. 10 (D-D),63-66 CORVETTE (exc. Tel. W.) .......63-66 PASS. w/T.W ...................63-67 Ser. 20-30 (D-D) ................ .64-67 Ser. 10 thru 30 (exc. D-D),64-67 Ser. 10 (D-D),68 Ser. 10thru 30 ..................64-68 G-10-20 ........................65-66 CORVETTE w/Tel. W............65-66 CORVETTE w/Tel. W............65-66 PASS. (exc. T.W.) ...............66 PASS. (w/T.W.) .................67-68 PASS. (w/T.W.) .................67 PASS, CORVETTE (exc. Tel. W) ..67-68 CORVETTE w/Tel W............

RING UNIT, (collapsible spacer) uppershaft ret, and brg. preload ........... 5678952 1 .70

RING, retainer ....................... 7800396 1 .25RING, upper retaining ................. 5699603 1 .25

RING, lower brg. retaining ............. 7800214 1 .25RING, special retaining ............... 7801404 1 .45

RETAINER, upper....................RETAINER, strg. gear inter, shaft dust

seal..............................RETAINER, upper shaft brg. preload

springwasher ......................RETAINER, lower....................RETAINER, lower and upper shaft brg.,

strg. shaft stop ring ................RETAINER, lower shaft brg............RETAINER, lower shaft brg. assy. .... .

RETAINER, upper,center shaft seal (two lugs)..........

RETAINER, column lwr. brg...........RETAINER, lower brg. adapter .........SLEEVE UNIT w/adjuster, lwr. strg. shft

WASHER, strg. gear inter, shaft dust ... .WASHER, upper shaft brg. preload springWASHER, upper shaft brg. preload spring

retainer...........................WASHER, upr. shaft brg. preload spring

retainer...........................WASHER, lwr. shaft brg .............. .WASHER, lower ......................WASHER, lower brg. thrust ............WASHER, lwr. brg. spr. thrust ..........SEAT, lower.........................SEAT, upper brg ..................... .SEAT, upper brg. preload spring........SEAT, upper bearing preload.......... .SEAT, upper shaft upr. brg . ............SEAT, upper .........................SEAT, lower brg. upper ...............SEAL, strg. gear inter, shaft dust ......NUT, upr. shaft upr brg................NUT, upper brg, race seat .............BUSHING, jacket upper cover ..........PACKING, lwr. shaft brg . .............

PACKING, lower brg . ................ .PACKING, lower brg . ................ .

SPRING, lower (3 coils) ............... 3758803 1 .10SPRING, upper inter, shaft and yoke brg. 5679310 1 .30SPRING, upper ....................... 6256574 1 .08

SPRING............................. 3843782 1 .10SPRING, upper ....................... 3843740 1 .10SPRING, lwr, shaft brg ................ 5694196 1 .45SPRING, upper bearing ................ 3863915 1 .15SPRING, lower brg. asm ............... 3866591 1 .10SPRING, upper ....................... 5695946 1 .40SPRING, upper ...................... 3900514 1 .10SPRING, lower ....................... 5698431 1 .35SPRING, lower ....................... 7800397 1 .50

265471 1 .10

2405520 1 .65

5678400 1 .30382536 1 .43

5694191 A.R. .235694927 1 1.275696431 1 1.27

5673944 1 .147800413 1 1.755699583 1 .357801219 1 1.25

24791860 1 .155677798 1 .20

5678293 1 .25

5693606 1 .255694227 1 .257800399 1 .757802124 1 .253903701 1 .153824101 1 .435676971 1 .285693604 1 .615693921 1 .375698399 1 .753902573 1 .05

262474 1 .222407712 1 -205693607 .1 1.105698741 1 2.503873136 1 (4.012)5694195 1 .18

780 03 95 1 .307802244 1 .30

6.521



SPRING, upper bre. hsg. retaining ...... 7800151 3 25

SPRING, upper (5 coils-l'4, free length) 3741877 1 .10SPRING, lower (4 coils-15/z free length) , 3750586 1 .10SPRING, strg. shaft clamp ............. 7803079 1WEDGE, column locking ............... 5693931 1 1.55WEDGE, shaft locking ................ 7800420 1 .75ADAPTER, steering shaft ............. 3857435 1 .45ADAPTER, lower bearing ............. 5699296 1 1.75ADAPTER, lower brg . ................ 5699062 1 3.30ADAPTER, lower, brg . ................ 5698365 1 .70SPACER, strg. shaft lower brg. ........ 3840897 1 .07SPACER, lower brg . .................. 5698570 1 .50STOP, lower bearing spring............ 3857436 1 .10SLEEVE, upper ...................... 3824100 1 .10CLAMP, strg. shaft lower thrust ........ 7800291 1 .45

CLAMP, lower brg. spring stop ......... 599234 1 (6.234)CLAMP, lower brg . ................... 7802662 1 .70

40-4841-4642-4647-5347-5347-5347-5347-5348-5349-50

50-5253-5453-5754-55

54-55

54-5554-5554-5555-5755-5755-5655-5655-5655-5657-5957-5957-6757-6758585858-6259-6060-626361-6261-6459-64

PASS. (exc. KB) ................UTIL., AN, BN, DS (exc. COE) ...UTIL., BN, DS (exc. COE) .......COMM., 1

1/ TON (exc. D-D, SBC)..

COMM., 11z TON (exc. D-D, SBC)..

SBC, 2 TON (exc. COE) ..........SBC, 2 TON (exc. COE) ..........COE ...........................D-D ...........................PASS. (1st design) ..............PASS. (2nddesign) ..............PASS. (exc. P/S) ................CORVETTE....................COMM., 112 TON (1st Ser.) (exc.

D-D, SBC) ....................COMM., 1

1/ TON (1st Ser.) (exc.

D-D, SBC) ....................D-D (1st Ser.) ...................SBC, 2 TON (1st Ser.) (exc. COE) .COE...........................PASS. .........................PASS. .........................Ser. 3 (2nd Ser.) (exc. D-D) .......Ser. 3 (2nd Ser.) (exc. D-D) .......D-D (2nd Ser.) ..................D-D (2nd Ser.) ..................Ser. 3 (exc. D-D) ................Ser. 3 (exc. D-D) ................D-D (exc. 102 W.B.) .............D-D (exc. 102 W.B.) .............PASS. .........................PASS. .........................PASS. .........................CORVETTE....................PASS.,Ser. 10 thru 30 (exc. D-D),4/WD (1st Ser.) .................

Ser. 10 (D-D) ....................PASS. (exc. T.W.) ...............PASS. .........................

67-68 PASS. (exc. T.W.) ...............39-40 PASS. (exc. JB),41-46 ALL (exc. COE),47-54 ALL (exc. P/S),53-62 CORVETTE,55-57 ALL,58-59 Ser 3,60-62 D-D (exc. 102 W.B.) .............58 PASS. .........................68 CORVETTE ....................66 PASS. w/T.W . ..................67-68 CORVETTEw/Tel. W ............65-66 PASS. w/A.T. (exc. B.S., T.W.) .. .67-68 PASS. w/ T.W . ................. .67-68 PASS. w/O.D., 3-SPD. .......... .67-68 PASS. (exc. T.W.) ...............63-65 CORVETTE (exc. Tel. W.) .......68 PASS. w, 3-SPD . ............... .6 5-66 PASS. (exc. T.W.) ...............63 CORVETTE ....................67-68 Ser. 10 thru 30 (exc. D-D) ........58-64 PASS,60-64 ALL (exc. D-D),61-64 Ser. 10 D -D .....................67-68 CORVETTE ....................

6.524 SHAFT ASSY., Steering Gear, w/Worm

(53'/4 O.L.) ........................(49

1/4 O.L.) with ball nut assembly ... .

(49 1/ O.L.) ........................(47% O.L.) ........................(47% O.L.) w/ball nut assv. ........ .(48 O.L.) ..........................(48 O.L.) w/ball nut asst'........... .(57'/4 O.L.) w/ball nut assv. ........ .(57 O.L.) w/ball nut assv. ..........(48"/ Z O.L.) (circular "V" groove at

upper end of worm) , , , , , , , , , , , , , , ,(48"/32 O.L.) (flat at upper end of worm)(47'/2 O.L.) ........................(56'/8 O.L.) ........................

(47'/, 6 O.L.) ........................ 5665308 1 12.55

(475/ 6 O.L.) w/ball nut assy.......... 5665294 1 25.90(56

11/ 6 O.L.) w/ball nut asst'. ........ 5665320 1 24.45(47"/ b O.L.) w/ball nut assn......... 5665260 1 24.70(59/32 O.L.) w/ball nut asst'.......... 5665265 1 24.25(42°/ 6 O.L.) w/ball nut assv.......... 5671618 1 21.75(42

1/ O.L.) ........................ 5671619 1 10.70

(46'/40.L.) ........................ 5667983 1 13.0046% O.L.) w/ball assy . ............. 5667982 1 25.90(51 34 O.L.)' ........................ 5668548 1 13.45(51 3/4 O.L.) w/ball nut assn. ......... 5668547 1 27.15(43% O.L.) ........................ 5671027 1 12.80(43% O.L.) w/ball nut assy. ......... 5671028 1 25.50(48

19/„ O.L.) ....................... 5692494 1 12.85

w/ball nut as sy .................... 56 92493 1 26.15lower............................. 5671820 1 9.90lower, w/ball nut assy . ............. 5671819 1 20.55upper, w/coupling (38"/,, O.L.)....... 5672553 1 11.70(51

1 4 O.L.) ........................ 5672001 1 10.95

upper , w /p in ....................... 5690861 1 5.75upper (351l/ O.L.) .................. 5689620 1 4.10upper (w/coupling) (38/64 O.L.) ...... 5675222 1 11.95intermediate, w/upper flange

(19'/8 O.L.) ...................... 5673153 1 5.80

265763 1 11.25267888 1 22.25267887 1 9.55270283 1 9.70

5660231 1 23.30270260 1 12.70270259 1 25.25270776 1 23.75

5660037 1 24.70

5660219 1 11.605662120 1 11.755664365 1 11.605666148 1 11.30

O

evroIet Motor Division 6.521-6.524Chevrol M visionGeneral Motors Corporation 971

59-64 PASS. (exc. P/S),60-66 Ser. 10 thru 30 (exc. D-D),61-67 Ser. 10 (exc. D-D),68 Ser. 10 thru 30 (D-D) ............. lower, w/worm (8'/4 O.L.) ............ 5673148 1 6.8561-67 Ser. 10 (D-D) ................... lower, w/ball nut asst'. (8'/4 O.L.)59-64 PASS. w/P/S ................... (daub of yellow paint) ............. 5673150 1 18.2559-64 PASS. w/P/S ................... lower, w/worm (8'/4 O.L.)

(daub of yellow paint) ............. 5673151 1 6.8560-66 4/WD .......................... w/ball nut assy. ................... 5689566 1 18.3560-63 4/WD (1st Ser.) ................. intermediate, w/coupling ............ 5674035 1 8.4059-60 PASS.,60-62 Ser. 10 thru 30 (exc. D-D),63 4/WD (1st Ser.) ................. upper, w/coupling (39 15

/32 O.L.)....... 5674391 1 12.0060-62 Ser. 10 thru 30 (exc. D-D, 4/WD) ... intermediate, w/upr, flange

(17 3/32 O.L.) ...................... 5673593 1 6.60

59-64 PASS. (exc. P/S),60-66 Ser. 10 thru 30 (exc. D-D, 4/WD),61-67 Ser. 10 (D-D),68 Ser. 10 thru 30 (D-D) ............. w/ball nut assy. ................... 5674275 1 18.6558 PASS.,61-64 PASS . ......................... upper, w/Pin....................... 5690729 1 5.5563-68 CORVETTE ................... (7/ O.L.) right hand thread ......... 5677658 1 8.1063-66 CORVETTE (exc. Tel. W.) ....... upper (37'32 O.L.) .................. 5690810 1 5.5563-66 Ser. 10 (D-D) ................... upper ............................. 5690965 1 4.1063-68 CORVETTE .................... w/ball nut ......................... 5677650 1 20.3063-66 4/WD (2nd Ser.) ................. w/lower flange (55 3 132 O.L.) ......... 5690344 1 15.4063-66 Ser. 10 thru 30 (exc. D-D, 4/WD) .. w/lower flange (56'/ 6 O.L.) .......... 5690345 1 15.4063-66 Ser. 10 thru 30 (exc. D-D, 4/WD) .. upper (55"/3 z O.L.) .................. 5690362* 1 7.4563-66 4/WD (2nd Ser.) ................. upper (55 3

/64 O.L.) .................. 5690365* 1 8.4063-65 PASS. w/T.W . .................. . upper ( 451

44 O.L.)................... 5695422 1 15.80

63-64 PASS. w/T.W . .................. upper inter......................... 5678122 1 14.3063-64 PASS. w/T.W . .................. lower inter ........................ 5678143 1 8.0063-64 PASS. w/T.W . .................. center, w/pin ...................... 5678144 1 4.1063-64 PASS. w/T.W . .................. intermediate, w/upper flange......... 5678146 1 3.3963-64 PASS. w/T.W . .................. center ............................ 5678173 1 8.0064-68 G-10-20 ........................ w/ball nut......................... 5691778 1 21.0564-68 G-10-20 ........................ w/worm ........................... 5691779 1 14.7065-68 PASS.,67-68 Ser. 10 thru 30 (exc. D-D, 4/WD) .. w/ball nut assy . ................... 5678409 1 20.1565-68 PASS.,67-68 Ser. 10 thru 30 (exc. D-D, 4/WD) ., w/worm ........................... 5678410 1 7.1065-66 PASS. (exc. T.W.) ............... upper ............................. 5693115 1 4.9065-66 PASS. w/T.W ................... intermediate, w/yoke ............... 5694244 1 13.1065-66 CORVETTE w/Tel. W .......... strg. column ....................... 5694176 1 32.5066 PASS. w%T.W . .................. upper ............................. 5697738 1 16.5066 PASS. w/T.W . .................. lower ............................. 5695305 1 11.8567 Ser. 10 (D-D),68 Ser. 10 thru 30 (D-D) ............. upper ............................. 7800083 1 4.1067 Ser. 10 thru 30 (exc. D-D) ........ .................................... 7800289 1 12.7567-68 PASS. w/T.W . .................. upper ............................. 5699969 1 17.5067 CORVETTE w/Tel. W. (1st design) .................................... 7800510 1 39.5067 CORVETTE (exc. Tel. W.) ....... .................................... 5699851 1 16.2567 CORVETTE (2nd design) ......... .................................... 7803004t 1 42.75

tNOTE: When using on vehicles not incorporating a lower bearing clamp also order 1 spacer 7802978,1 clamp 7802662, 1 bolt 454924 and 1 nut 120369.

67-68 PASS. (exc. T.W.) ............... .................................... 5699849 1 15.7567-68 PASS. w/T.W . .................. lower ............................. 5699777 1 24.5067-68 4/WD .......................... w/worm ........................... 7801338 1 7.1567-68 4 WD .......................... w/ball nut assy. ................... 7801339 1 18.3567-68 Ser. 10 (D-D) ................... strg.intermediate .................. 3914428 1 41.7568 Ser. 20-30 (D-D) ................. strg. intermediate .................. 3916827 1 41.7568 Ser. 10 thru 30 (exc. D-D) ........ .................................... 7802054 1 18.7568 CORVETTE w/Tel. W ............ .................................... 7802380 1

*NOTE: Use w/5689776 BOLT UNIT to replace the attaching rivets.

6.524



6.525 COUPLING UNIT -COUPLING ASSY. - TRUNNION UNIT-YOKE-YOKE UNITand PARTS, Steering Shaft U-Joint

58-64 PASS. (exc. T.W.),60-62 Ser. 10 thru 30 (exc. D-D),63-64 4/WD (1st Ser.) ................. upper,63 PASS. w/T.W . .................. center ............................ 3821596 1 5.5059-62 ALL (exc. D-D),63-64 PASS.,63-66 Ser. 10 thru 30 (exc. D-D, 4/WD),63-66 4/WD .......................... COUPLING ASSY.,w/lower flange ...... 5689757 1 6.8063-66 CORVETTE (exc. Tel. W.) ....... COUPLING ASSY ..................... 5690809 1 20.7565-66 PASS. (exc. P.S.) ............... COUPLING ASSY., w/lower flange...... 5692007 1 7.5565-66 CORVETTE w/Tel. W ........... COUPLING ASSY ..................... 5692974 1 14.1067-68 PASS., CORVETTE (exc. P.S.),67-68 Ser. 10 thru 30 (exc. D-D) ........ COUPLING ASSY., w/lower flange ..... 5699250 1 7.7061 Ser. 10 (D-D) ................... TRUNNION UNIT, intermediate shaft ... 2420606 2 9.1562-64 Ser. 10 (D-D) ................... TRUNNION UNIT, intermediate shaft ... 3817179 2 9.5065-67 Ser. 10 (D-D),68 Ser. 10 thru 30 (D-D) ............. TRUNNION UNIT, intermediate shaft ... 3918866 2 8.7561-68 Ser. 10 (D-D) ................... YOKE, strg. gear intermediate shaft

slip (stamped L6NLS-20-7) .......... 3796219 1 10.7561-68 Ser. 10 (D-D) ................... YOKE, strg. gear intermediate shaft

spline (stamped 6-NYSM-20-9) ........ 3796220 1 13.7566 PASS. w/T.W . .................. YOKE, upper w/bearing ............... 5697742 1 17.0068 Ser. 20-30 (D-D) ................. YOKE, intermediate shaft spline ....... 3930804 1 12.5068 Ser. 20-30 (D-D) ................. YOKE, intermediate shaft slip ......... 3930805 1 11.2561-66 Ser. 10 (D-D) ................... YOKE UNIT, strg. gear intermediate

shaft clamping ..................... 3869040 1 7.5067 Ser. 10 (D-D) ................... YOKE UNIT, stg. gear intermediate shaft68 Ser. 10 thru 30 (D-D) ............. clamping .......................... 3918864 1 7.5063-66 CORVETTE .................... FLANGE ASSY., coupling lower........ 5691327 1 10.6065-66 PASS. w/P/S ................... FLANGE ASSY., lower................ 5691698 1 9.2067 PASS. w/P/S ................... FLANGE ASSY., w/coupling, lower..... 5699226 1 9.2567-68 CORVETTE .................... FLANGE ASSY., upper ................ 5699725 1 3.9563-66 CORVETTE .................... FLANGE, upper...................... 5690811 1 5.8563-64 PASS. w/T.W . .................. FLANGE, upper inter, and center

shaft conn ......................... 5692933 A.R. 2.2565-66 PASS. w/T.W . .................. FLANGE, inter, shaft conn. ........... 5692961 1 4.6767-68 CORVETTE (exc. Tel. W.) ....... FLANGE, strg. jacket housing ......... 7800569 1 2.2567-68 PASS. (8 cyl.) w/T.W. ........... FLANGE, strg. shaft ................. 5699294 1 5.2068 PASS. w/P/ S ................... FLANGE, w/coupling, lower ........... 7803564 1 9.5058-64 PASS. (exc. T.W.),60-62 Ser. 10 thru 30 (exc. D-D),63 4/WD (1st Ser.) ................. BEARING, upper coupling,63-64 PASS. w/T.W . .................. center shaft coupling ("/32 I.D.) ...... 5675599 A.R. .4558-60 PASS. w/5672553-79 ............ COVER, coupling .................... 5672502 1 .3758-60 PASS . ......................... RING, coupling cover retainer (3 lugs) .. 5671547 1 .0561-66 Ser. 10 (D-D) ................... RING, strg. gear inter, shaft trun. brg. .. 9023364• 8 .0567 Ser. 10 (D-D),68 Ser. 10 thru 30 (D-D) ............. RING, strg. gear inter. shaft trunnion , .. 3918868 8 .2061-66 Ser. 10 (D-D) ................... SEAL, strg. gear inter, shaft trunnion ... 2386330 A.R. .0467 Ser. 10 (D-D),68 Ser. 10 thru 30 (D-D) ............. SEAL, strg. gear inter, shaft trunnion ... 3918867 8 .2067 CORVETTE ................... SEAL, tab........................... 7800511 1 .3067-68 PASS . ......................... SEAL, shift tube column, filler tube

column ............................ 5698384 1 .4567-68 PASS . ......................... SEAL, shift tube strg. shaft ........... 5698799 1 .3558-62 PASS.,60 Ser. 10 thru 30 (exc. D-D) ........ WASHER, upper (1 11/2

I.D.) ............ 5673727 A.R. .1060 ALL (exc. D-D) ................. WASHER, upper (1'/ 6 I.D. x 2Y 6 O.D. x

'/8 thk.) ............................ 5674398 A.R. .3061-62 ALL (exc. D-D),63 4/WD (1st Ser.),63-64 PASS. (exc. T.W.) ............... WASHER, upper, center (1'/ 6 I.D. x63-64 PASS. w/ T.W . .................. 2Y6 O.D. w/flanged edges) .......... 5674962 1 .2067 PASS, CORVETTE (exc. T.W.).... WASHER, upper retaining ring thrust .... 7800580 167 PASS, CORVETTE (exc. T.W.).... WASHER, upper retaining ring wave ..... 7800581 167-68 CORVETTE w/Tel. W. ........... WASHER, upper retaining ring thrust .... 7801247 1 .2566 PASS. w/T.W . .................. STOP, joint preload spring............ 5693405 1 .33

C%-1967Chevrolet Motor Division 6.525General Motors Corporation 973

58-64 PASS.,60-62 Ser. 10 thru 30 (exc. D-D, 4/WD),63 4/WD (1st Ser.) ................. CLAMP, upper shaft (1'/ 6 I.D. x'/ wide) 5671546 1 .2859-64 PASS.,60-62 Ser. 10 thru 30 (exc. D-D),63-67 CORVETTE,63-65 4/WD,63-64 Ser. 10 (exc. D-D, 4/WD),65 Ser. 10 thru 30 .................. REINFORCEMENT, intermediate shaft67 PASS . ......................... coupling .......................... 5682486 2 .1858-64 PASS. (exc. T.W.),60-62 Ser. 10 thru 30 (exc. D-D),63 4/WD (1st Ser.) ................. SPRING, strg.. upper,63-64 PASS. w/T.W . .................. center shaft coupling (/ long) ....... 5675186 1 .1463-68 PASS. w/T.W . .................. SPRING, strg. shaft yoke .............. 5679311 1 .4559-65 PASS.,60-62 Ser. 10 thru 30 (exc. D-D),63-66 Ser. 10 (exc. D-D, 4/WD),63-66 4/WD,67-68 PASS., CORVETTE,67-68 Ser. 10 thru 30 (exc. D-D) ........ BOLT UNIT ......................... 5688050 1 1.2563-66 CORVETTE .................... BOLT, ( 5/ 6 -24 x 1'/) lwr. flange

to upr. flange (pin dia. 1/) 5690496 1 .9063-66 CORVETTE .................... BOLT, (/ 6 -24 x 1'/e) lwr. flange to

upr. flange (pin dia. %).............. 5690497 1 1.7065-67 ALL, CORVETTE ............... BOLT ('/-24 x 1'/„) .................. 5686553 1 .3068 PASS . ......................... BOLT w/lock washer lower strg. shaft

brg. adapter ....................... 7801279 1 .4568 CORVETTE .................... SPACER, strg. column shaft ........... 7802978 1 .7563-66 PASS. w/T.W . .................. SHIM UNIT, tilt wheel strg. column shaft

centering sphere ................... 5679661* 2 2.25*NOTE: Consists of 1 bearing, 3 shims, 2 rings, 2 spheres and 1 washer.

6.550 VALVE ASSY.-ADAPTER ASSY.-CLAMP, Steering Gear Hydraulic

NOTE: For Seal and Gasket Kits see group 6.507.55-59 Ser. 3 .......................... single taper....................... 3751584 1 60.7555-57 PASS . ......................... w /adapter (includes all internal parts) 5681716 1 44.0058-64 PASS . ......................... w/adapter ......................... 5691108 1 37.5055-59 Ser. 3 .......................... w/o rod (Bendix 127299) ............ 3756567 1 28.5063-67 Ser. 10 thru 30 (exc. D-D, 4/WD) .. w/adapter (P/S Installation Unit) .... . 5690644 1 28.0063-68 CORVETTE .................... w /adapter ......................... 5691955 1 36.5565 PASS. (exc. T.W.) ............... .................................... 5688904 1 55.2065 PASS. w/T.W . .................. .................................... 5694627 1 61.3566-68 PASS . ......................... . . .. . . .. . . ......................... . 5696123 1 63.0067 4/WD .......................... .................................... 7801055 1 37.5068 Ser. 10 thru 30 (exc. D-D, 4/W.D.),68 Ser. 20-30 (D-D) ................. w,/adapter . . . . . . . . . .. .............. 7803987 1 29.2555-57 PASS . ......................... ADAPTER ASSY. w/valve shaft........ 5682053 1 19.8055-57 Ser. 3 .......................... ADAPTER ASSY. (Bendix 126647)...... 3733856 1 11.0058-59 PASS .......................... ADAPTER ASSY. w/valve shaft........ 5685456 1 17.6558-59 Ser. 3 .......................... ADAPTER ASSY..................... 2371555 1 12.7560-64 PASS.,64-68 CORVETTE .................... ADAPTER ASSY. .................... 5691130 1 17.9563-67 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 10 thru 30 (exc. 4/W.D.) ...... ADAPTER ASSY . .................... 5690816 1 20.4567 4/WD .......................... ADAPTER ASSY. .................... 7801056 1 23.2568 Ser. 20-30 (D-D) (159) ............ ADAPTER ASSY . .................... 3924503 155-57 PASS . ......................... CLAMP, control valve to relay rod...... 5681747 1 (6.234)

6.551 SHAFT-SHAFT KIT-KIT-NUT-PI N, Steering Gear Hydraulic Valve

55-57 PASS . ......................... (4 0.L.),55-59 Ser, 3 ..........................

.......,adapter (35/8 O.L.) (Bendix

5682384 1 1.25

126480) ........................... 3733853 1 .6558-59 PASS .......................... SHAFT KIT ......................... 5687734* 1 1.2260-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w /P,/S ............ SHAFT KIT ......................... 5687998* 1 1.6555-57 PASS .......................... KIT, adapter and sleeve............... 5683350# 1 10.75

6.525-6.551 0-1967

974

Chevrolet Motor Division


58-62 PASS.,63-68 Ser. 10 thru w/P/S .............. KIT, adapter and sleeve ............... 56862611 155-57 PASS, .......................... KIT, hyd. strg. adapter................ 5683349t 1

INOTE: Consists of 2 seats and 1 each spring, stud, plug, pin.58-62 PASS.,63-65 Ser. 10 thru 30 w/P/S............ KIT, hyd. strg. adapter ................ 5686260♦ 1

ANOTE: Consists of 2 seats, 1 spring, 1 stud.63-64 PASS., CORVETTE,63-68 Ser. 10 thru 30 w/P/S,65-68 CORVETTE .................... KIT, adapter ........................ 5691150** 1

*NOTE: Consists of 2 seats, 1 each of seal, spring, stud, lock nut, spacer andscrew or bolt.

63-64 PASS., CORVETTE,65-68 CORVETTE .................... KIT, adapter and sleeve ............... 5691151§ 1

§NOTE: Consists of 1 each adapter and plug assy., relay rod, clamp, lock nut,seal, sleeve, spacer, screw and bolt.

63-64 PASS., CORVETTE,63-68 Ser. 10 thru 30 w/P/S,65-68 CORVETTE .................... KIT, ball stud seal and clamp .......... 5691690U 1

•NOTE: Consists of 1 each clamp, lock nut, seal, screw or bolt and spacer.67 4/WD w/P/S .................... KIT, adapter and sleeve............... 7801058• 1

SNOTE: Consists of 1 relay rod and 1 bearing.55-59 PASS . ......................... NUT, valve and adapter lock (

14-28) ... 5687560 1

55-57 Ser. 3 .......................... NUT, valve and adapter lock (5/6 -24)(Bendix 126126) .................... 3733840 1

60-64 PASS.,63-64 CORVETTE .................... NUT, valve and adapter lock ( 1/4 -28 x63-64 Ser. 10 thru 30 w/P/S............ '/6 hex. w/shoulder) ................ 5689156 155-59 PASS ........................... PIN, valve and adapter lock nut (wire

dia. .041) ......................... 5683112 1*NOTE: Consists of valve shaft and ball seat spring.$NOTE: Consists of 1 adapter and 1 sleeve.

9.253.30

2.07

2.31

9.25

.75

24.50

.15

.10

.25

.07

6.552 SPRING—SEAL—SEAL KIT—RING—WASHER—BUSHING—RETAINER,Steering Gear Hydraulic Valve

55-57 PASS.......................... (4 coils—'/ free length) .............. 5682050 158 PASS.......................... (4 coils-3/4 free length) .............. 5685822 159-64 PASS.,63-68 Ser. 10 thru 30 w/P/S ............ (2.9 coils- 35

/„ free length) ........... 5688441 160-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w/P/S ............63-68 CORVETTE ....................63-66 Ser. 10 thru 30 (exc. D-D, 4/WD)65-66 PASS..........................63 ALL, CORVETTE...............60-62 PASS..........................65-66 CORVETTE ....................65 PASS..........................65-67 PASS . .........................55-57 PASS..........................55-57 PASS..........................

55-57 PASS..........................

58 PASS..........................59 PASS..........................60-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w/P/S ............ WASHER, spring thrust ('/ O.D.) ....... 5687991 155-59 Ser. 3.......................... BUSHING, control valve (zinc plated)

( 1 3/32 O.D.) (Bendix 126359).......... 3733844 159-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w/P/S ............ RETAINER, RETAINER, spring .................. 5687006 1

0-1967Chevrolet Motor DivisionGeneral Motors Corporation 975

1510

15

.10

.45

.23

6.551-6.552

adjustment (6 coils- 254, free length) .. 5687990 1 .15

w/assy. 5691955) .................. 5691957 1 .35control valve ...................... 5687009 1 .25valve spool ....................... 5687252 1 .15

SEAL, end plug, valve housing......... 5691199 1 (6.581)SEAL, "0" ring, valve reaction spool

( Z'/. I.D.) ......................... 5681740 1 (6.674)SEAL "0" ring (1 15/64

x 1 1/) 5686546 1 .25SEAL KIT, valve ring and back up...... 5687182 1 3.06RING, annulus ( 25/

IA I.D. x 1 O.D,) ...... 5682045 1 .47

WASHER, annulus ( 13/2 I.D. x 1 O.D. x

thick) ........................... 5682046 1 .07WASHER, spring thrust ( 1 '/32 I.D. x 2'/2

O.D.) ............................. 5682051 1 .05WASHER, spring thrust ('/ 6 I.D.. x'/ O.D.) 5685457 1 .03WASHER, spring thrust ................ 5687010 1 .07

6.553 VALVE ASSY.—PLUG, Ste ering Gear Hydraulic Check

53-54 PASS . ......................... .................................... 5663874 1 1.5155-59 Ser. 3.......................... control relief (Bendix 126339)........ 3733841 1 1.6055-59 Ser. 3.......................... PLUG, relief valve ( 3/s I.D. x '/ b O.D.)

(Bendix 126345) .................... 3733842 1 .60

6.554 COVER KI T— PL ATE—SPACE R—WASHER—GASKET, Hydraulic Steering Valve

55-59 PASS.,60-64 PASS.,64-68 CORVETTE,65-68 Ser. 10 thru 30 w/P/S ............ dust, with lock nut ................. 5687996 1 .4263-64 Ser. 10 thru 30 w/P/S............ dust, with lock nut ................. 5692008 1 .5068 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D-D) ................. dust with lock nut .................. 7804011 155-59 Ser. 3 ......................... PLATE, adapter bushing (Bendix

126118) ........................... 3733837 1 .6555-57 PASS .......................... SPACER, adapter annulus (1 hole 3/4

I.D.) ............................. 5682057 1 .1158-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w/P/S ............ SPACER, adapter annulus ............. 5685469 1 .1455-59 Ser. 3 ......................... SPACER, valve and adapter (Bendix

126483) ........................... 3733855 1 .2555-57 PASS .......................... WASHER, adapter shaft (°/s I.D. x j9/32

O.D.) ............................. 5682379 1 .0559-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w/P/S ............ WASHER, adapter shaft ............... 5687011 1 .1563-64 PASS., CORVETTE,65-68 Ser. 10 thru 30 w/P/S,65-68 CORVETTE .................... GASKET, adapter annulus spacer ....... 5691581 1 .23

6.555 SEAL, Steering Gear Hydraulic Valve Cover

53-54 PASS .......................... (1'/ O.D.) ......................... 5663837 1 1.13

6.556 SEAL, Steering Gear Hydraulic V al ve

53-54 PASS .......................... rubber(2''/b O.D.) .................. 5665836 2 .45Not required in this group. See

group6.58

4 .................. (23/aI.D.).......................... 5661386 .50

6.560 SLEEVE and PART S, Hydraulic Steering Adapter

55-57 PASS .......................... bearing ( 3/4 I.D. x 1'/= O.D.) ......... 5681725 1 3.1655 -57 Ser. 3 ......................... bearing (Bendix 126477) ............ 3733851 1 3.5058-64 PASS.,63-64 CORVETTE,63-64 Ser. 10 thru 30 w/P/S . , . —....... bearing (1'/a O.D. x 1"/, 6 O. L.)....... 5687704 1 2.4058-59 Ser. 3 ......................... bearing (Bendix 127319) ............ 2371572 1 3.7555-57 PASS .......................... PLUG, adjuster ball (1"/ 2 O.D.. x 2I/32

thk.) (2 flats) ...................... 5682385 1 1.5555-59 Ser. 3 ......................... PLUG (Bendix 127341) ............... 3754772 1 .4558-62 PASS.,63-64 PASS., CORVETTE,63-68 Ser. 10 thru 30 w/P/S,65-68 CORVETTE .................... PLUG, adjuster ball (1 54 6 O.D. x 2 '^3 z thk.) 5691747 1 1.5555-57 PASS . ......................... PIN, lock ( 1/8 O.D. x 1%2 O.L.) ......... 5682086 1 .1055-59 Ser. 3 ......................... PIN, stop screw (Bendix 127197) ....... 2368571 1 .1058-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w/P/S ............ KEY ( b dia. hole) ................... 5686218 1 .1055-64 PASS.,63-66 CORVETTE ................... SEAT, ball (1 O.D.) .................. 264946 2 (6.874)55-57 PASS .......................... SPRING, ball seat (drag link) (3 1/

coils- 13/ 6 free hgt.) ................ 5684206 1 .37

6.553-6.560 C_1967Chevrolet Motor Division


58-64 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 w/P/S ............ SPRING, ball seat (°/ 2 free hgt.-spiral

shape) ............................ 5687733 1 .1055-57 PASS . ......................... STUD, ball (2 73/„ O.L.-7/ -20 thd.) ..... 5681722 1 (6.874)58-59 PASS .......................... STUD, ball (2'/2 O.L.-'/,-20 thd.)....... 5685461 1 (6.874)

55-57 PASS .......................... SEAL, control valve ball stud (°/6 I.D. x% O.D. x'/,thk.) ................... 3710372 1 (6.886)

58-59 PASS SEAL, control valve ball stud ('/ I.D. x..........................1 O.D. x '/e thk.) ................... 3736289 1 (6.886)

55-59 Ser. 3 ......................... SEAL, control valve ball stud (3/4

I.D. x1'/e O.D. x 1 /,, thk.) ................. 3762879 1 (6.886)

55-57 PASS . ......................... SHIELD, dust (2 1, O.L.) ............... 5681776 1 (6.886)58-62 PASS .......................... SHIELD, dust (1'/ O.L.) .............. 5685468 1 (6.886)

55-59 Ser. 3 ......................... SCREW, stop (1'/4 O.L. x'/s O.D.) (Bendix125675) ........................... 3733984 1 1.95

6.575 BRACKET-BOLT-NUT- REINFORCEMENT, Hydraulic Steering Cylinder

58-59 '/2 , '/4 , 1 TON ................... axle (6 5/6 O.L.) .................... 3726910 1 3.2555-57 l,, 3/, TON ...................... tie rod (forged 3721155) ............. 3721155 1 2.4058-59 Ser. 3 ......................... tie rod (forged 3726624) ............. 3726624* 1 2.80

• NOTE: Used w/hvy. duty frt. axle equipt. on 11/ ton models.

58 PASS .......................... frame.. .......................... 3743854 1 1.6559-64 PASS . ......................... frame, cylinder and stabilizer shaft ... 3814123 1 1.5063-68 CORVETTE .................... frame ............................. 3832131 1 2.0863-66 Ser. 10 thru 30 (exc. D-D, 4/WD) .. (forged 3829580) ................... 3829580 1 6.8567 4/WD (w/P/S) .................. axle .............................. 3896302 1 9.7567 4/WD (w/P/S) .................. tie rod ............................ 3896305 1 6.8567 Ser. 10 thru 30 (CONY.) w/P/S .... .................................... 3896372 1 8.5068 Ser. 10 thru 30 w/P/S ............ ........................ ........ 3915266 1 5.5055-57 PASS .......................... BOLT, cyl. relay rod clevis (/6-20 x

2 944) ............................. 3716556 1 .30

55-57 PASS .......................... BOLT, attach. p/s cyl. frame brkt.( 746-20x 1'/4) ..................... 3709918 2 .07

55-56 1 TON (2nd Ser.) (exc. SBC),57 1 TON58-59 Ser. 3 ......................... BOLT, tie rod brkt. "U" ( 5/ 6 -24 x %).. 3721184t 2 .20

tNOTE: Not used w/hvy. duty ft. axle equipt.67 Ser. 10-20 (4/WD) ............... BOLT, tie rod bracket "U" (51 6-24) .... 3721369 2 .4067 4/WD .......................... BOLT, cyl. axle bracket "U" ('/e-24)... 3896304 2 .5063-64 PASS., CORVETTE,63-67 Ser. 10 thru 30 (exc. D-D, 4/WD),65-67 CORVETTE .................... NUT, frame bracket (/e-24)............ 3829413 1 .0559-63 PASS .......................... REINFORCEMENT, frame bracket ...... 3771820 2 .1063-68 CORVETTE (exc. Spec. H/Per.) .. REINFORCEMENT, frame bracket ...... 3832132 2 1.06

6.576 CYLINDER ASSY., Steering Gear Hydraulic

NOTE: For Seal and Gasket Kits see group 6.507.53-54 PASS ......................... (3'/2 cyl. dia.)...................... 5663958 1 15.9055-57 PASS .......................... (26Y5 O.L.) ........... ......... 5686370 1 27.2555-59 Ser. 3 ......................... booster-less knuckle (23"44 O.L.) ... 5687331 1 24.6058-64 PASS.,63-68 Ser. 10 thru 30 (exc. D-D, 4/WD),68 Ser. 20-30 (D-D) ................ (2614 O.L.) ........................ 5691110 1 27.6063-68 CORVETTE,67 4/WD ......................... (23%4 O.L.) ........................ 5691112 1 27.60

6.577 GASKET, Steering Gear Hydraulic Cylinder

53-54 PASS .......................... (4 sq. w/1 1/ sq. hole) ............... 5663876 1 .10

6.579 RING-SEAL, Steering Gear Hydraulic Cylinder Piston

53-54 PASS .......................... (3 O.D.) .......................... 5663824 2 .9965-68 PASS . ......................... .................................... 5689008 1 1.4665-68 PASS . ......................... SEAL, back up "0" ring .............. 5689009 1 .50

4-1967 6.560-6.579Chevrolet Motor DivisionGeneral Motors Corporation 977

6.580 ROD, Steering Gear Hydraulic Piston

53-54 PASS .......................... (5 long) ........................... 5663845 1 6.75

6.581 WASHER—NUT — RING — GROMMET—SPACER — STUD — SEAT — SPRING—SEAL-PLUG, Hydraulic Steering Cyl i nder Piston Ro d

53-54 PASS . ......................... thrust('/6 I.D. x 1 O.D.) ............ 5663819 2 .1555-56 ALL .......................... cyl. assy. to cyl. frame brkt.,57 ALL .......................... cyl. to cyl. tie rod brkt.,55-59 PASS .......................... cyl. to cyl. frame grommet retainer,58-59 Ser. 3,60-64 PASS.,63-68 CORVETTE .................... cyl. to cyl. tie rod brkt. grommet

retainer,63-67 Ser. 10 thru 30,68 Ser. 10 thru 30 (exc. D-D) ........ ( "/32 I.D. x 1'/ O.D.) ................ 3709454 2 .1053-54 PASS . ......................... NUT, lock ( -20) ................... 5680151 1 .2058-63 PASS .......................... RING, ball stud plug retainer.......... 5685399 1 .1563 .64 PASS., CORVETTE63-665 Ser. 10 thru 30,65-68 CORVETTE,67-68 Ser. 10 thru 30 (exc. D-D),68 Ser. 20-30 (D-D) ................. RING, ball stud plug retainer .......... 5691200 1 .1555-56 ALL .......................... GROMMET, cyl. assy. to cyl. frame brkt.,57 ALL .......................... cyl. to cyl. tie rod bracket,58-59 PASS .......................... cyl. to cyl. frame bracket,58-59 Ser. 3 .......................... cyl. to cyl, tie rod bracket,60-64 PASS.,63-68 CORVETTE .................... hyd. strg. cyl. to hyd. strg. cyl. frame

brkt.,63-67 Ser. 10 thru 30,68 Ser. 10 thru 30 (exc. D-D) ....... ('/ I.D. x 1'/ 5 O.D.) ................. 3709452 2 .0555-57 PASS .......................... GROMMET, cyl. to strg. relay and tie

rod,55-59 Ser. 3 .......................... cyl. anchor pin bushing (/8 I. D. x 1'/6

O.D.) ........................... 3715994 2 .1055-64 PASS.,55-59 Ser. 3,63-68 CORVETTE .................... SPACER, cy1. to frame brkt.,63-65 Ser. 10 thru 30 .................. cyl. to tie rod brkt. grmt. (3/ I.D. x67-68 Ser. 10 thru 30 (exc. D-D) ........ 1'/,,, O.L.) ......................... 3709917 1 .0558-59 Ser. 3A-3B-3E .................. SPACER, bracket .................... 3745060 2 .3558-59 Ser. 3,58-64 PASS.,63-68 CORVETTE,63-65 Ser. 10 thru 30,67-68 Ser. 10 thru 30 (exc. D-D),68 Ser. 20-30 (D-D) ................ STUD, mounting ball .................. 5685382 1 .9558-64 PASS.,63-68 CORVETTE,63-65 Ser. 10 thru 30,67-68 Ser. 10 thru 30 (exc. D-D),68 Ser. 20-30 (D-D) ................. SEAT, ball stud...................... 264936 1 .3358-64 PASS.,63-68 CORVETTE,63-65 Ser. 10 thru 30,67-68 Ser. 10 thru 30 (exc. D-D),68 Ser. 20-30 (D-D) ................. SEAT, ball stud spring ................ 264937 1 .1058-64 PASS.,63-68 CORVETTE,63-65 Ser. 10 thru 30,67-68 Ser. 10 thru 30 (exc. D-D),68 Ser. 20-30 (D-D) ................. SPRING, ball stud seat ............... 5684403 1 .1063-64 ALL, CORVETTE ............... SEAL, ball stud...................... 3687643 1 (6.111)63-64 ALL, CORVETTE,65-68 CORVETTE,65 Ser. 10 thru 30,67 4/WD,68 Ser. 10 thru 30 (exc. D-D H/W.D.),68 Ser. 20-30 (D-D) ................. SEAL "0" ring, end plug, valve housing 5691199 A.R. .20



58-63 PASS .......................... PLUG, ball stud end (used with cyl. withlub. fitting on end plug) ( 1 1

/6 O.D.) .. . 5690895 1 .2863-64 ALL, CORVETTE,65-68 CORVETTE,65 Ser. 10 thru 30,67-68 Ser. 10 thru 30 (exc. D-D),68 Ser. 10 thru 30 (exc. D-D 4/WD),68 Ser. 20-30 (D-D) ................. PLUG, ball stud end (1'/ 6 O.D.) ....... 5691201 1 .42

6.584 ADAPTER ASSY.—SEAL—RING, Steering Gear Hydraulic Cylinder

53-54 PASS .......................... (1 adapter, 1 rod seal, 3 "O" ringseals) .......................... 5664495 1 11.10

53-54 PASS .......................... SEAL, adapter piston rod (1'ie O.D.) .... 5664016 1 .7553-54 PASS .......................... SEAL, "0" ring (1% I.D.) ............. 5661523 1 .4053-54 PASS .......................... SEAL, "0" ring (2 3

/4 I.D.) ............. 5661386 2 (6.556)58-61 PASS.,63-64 ALL, CORVETTE (exc. D-D,

4/WD) ....................... SEAL, cyl. ball stud ................. 3687643 1 (6.111)55-57 ALL .......................... RING, wiper......................... 5682516 1 .10

6.586 RACK—PLUG, Steering Gear

53-54 PASS. w/P/S ................... .................................... 5663849 1 6.0565-68 PASS . ......................... piston and ball nut ................. 5692432 1 40.3565-68 PASS . ......................... PLUG, rack piston end ................ 5689695 1 1.00

6.587 PIN, Steering Gear Rack Cou pling

53-54 PASS. w/P/S . . ................. (''e O.D.) .......................... 5663850 1 .35

6.591 SHIM, Steering Gear Rack Cover

53-54 PASS. w/P/5 ................... (.003 thick) ....................... 5663880 A.R. .12

6.600 COOLER ASSY., Hydraulic Steering Oil

Not required in this group. Seegrou p

4.128 .................. .................................... 8529636 10.25

6.605 PUMP ASSY.—OIL, Steering Gear Hydraulic

53-54 PASS .......................... (w/out connectors and covers)....... 5680750t 1 71.15tNOTE: Use Type "A" G.M. fluid for P/S fluid. See group 4.101.

55-59 ALL .......................... .................................... 5687224* 1 61.50*NOTE . Use Super Type "A" G.M. fluid for P/S fluid. See group 4.101.

60-62 PASS.,63-64 PASS. w/oil bath (6 cyl.),63-64 PASS. (8 cyl.) .................. (black enamel) .................... 5692846 1 48.0063-64 CORVETTE .................... .................................... 5692842 1 45.8063-64 PASS. (6 cyl.),64-65 Ser. 10 thru 30 (exc. frt. stabilizer

equip.) ....................... (exc. oil bath air cleaner) ........... 6592840 1 48.0065-66 PASS. (6 cyl.) (exc. A.I.R.) ....... .................................... 5693120 1 45.8065 PASS. (8 cyl.) (exc. 409) ......... .................................... 5693139 1 48.0065 PASS. (409) .................... .................................... 5694537 1 43.0565-67 PASS. w/P/S (396, 427) .......... .................................... 5698075 1 45.8065-66 CORVETTE (396, 427),67-68 CORVETTE .................... .................................... 5698078 1 45.8066 PASS. (283, 327),66 PASS. w/A.I.R. (6 cyl.) .......... .................................... 5697816 1 45.8066 Ser. 10 thru 30 .................. .................................... 5693129 1 45.8067 PASS. (283, 327) ............... .................................... 5698072® 1 45.80

NOTE: when using 5698072 in place of 5697816 w/62 amp. gen. use oldreservoir or order 5692831.

—I9676.581-6.605Chevrolet Motor Division


67-68 PASS. (exc. A.I.R.) (6 cyl.) ....... .................................... 65980748 1 45.80SNOTE: When 5698074 is used in place of 5693120 on L6 engines also order

3904180 stud.67-68 Ser. 10 thru 30 .................. .................................... 5698079** 1 45.80

**NOTE: When 5698079 is used in place of 5693129 on L6 engines also order3904180 stud.

68 PASS. (307, 327) ................ .................................... 5698073 1 45.8068 PASS. (exc. 396, 427) ............ .................................... 7803748 1 48.0068 Ser. 10 thiu 30 (396) ............. .................................... 7804082 1ALLALL .......................... OIL (1 qt. can) ...................... 1050017 A.R.(8.800)

6.606 BRACKET—BRACE — SUPPOR — SUPPORT UNIT — WASHER—SPACER STUD—BOLT,Steering Gear Hydraulic Pump Mounting

60-61 PASS. (6 cyl.) (1st design) ....... used w/pump w/rear mtg. bolts....... 3887013 1 2.7560-61 PASS. (283) (1st design) ......... used w/pump w/rear mtg. bolts ...... 3771709 1 1.1361-62 PASS. (6 cyl.) (2nd design)....... front, used w/pump w/rear mtg. studs. 3786967 1 .9461-62 PASS. (6 cyl.) (2nd design) ....... rear, used w/pump w/rear mtg. studs . 3786966 1 .7561-64 PASS. (8 cyl.) (2nd design),63-65 CORVETTE, (Sp. H/per.

w,'Hyd. lifters),63-67 Ser. 10 thru 30 (8 cyl.) (1st

design) ...................... used w/pump w/rear mtg. studs ...... 3786870 1 1.3560-65 PASS. (348, 409) ................ used w/pump w/rear mtg. studs ...... 3786872* 1 1.1363-66 Ser. 10 thru 30 .................. pump to control valve hose .......... 3829581 1 .9565-67 PASS. (283, 327),66 Ser. 10 thru 30 (283) (2nd design),66-68 Ser. 10 thru 30 (283, 327) ......... .................................... 3860455 1 1.1865-67 PASS. w/P/S (396, 427) .......... .................................... 3863146 1 1.3665-66 CORVETTE w/P/S (Sp. H/Per.

w/Hyd. lifters) (1st design) ... . . .................................... 3872396 1 1.2163-67 PASS. (6 cyl.),63-66 Ser. 10 thru 30 (6 cyl.),67-68 Ser. 10 thru 30 (exc. D-D) (250),68 Ser. 20-30 (D-D) ................. .................................... 3877430 1 .5665-68 CORVETTE (427) ............... .................................... 3878242 1 3.6365-66 PASS. (396) .................... pump to steering, gear, inlet and outlet 3876908 1 .4367 PASS. (396, 427) ................ pump to strg. gear inlet and outlet hose 3906962 1 .4567-68 CORVETTE (exc. 427) ........... .................................... 3928493 167-68 Ser. 20-30 (292) (exc. A.I.R., D-D),67 Ser. 10 (292) (exc. A.I.R.),68 Ser. 20-30 (D-D) ................. .................................... 3914992 1 4.9568 Ser. 10 (292) (exc. D-D, 4/WD),68 Ser. 20 (SUB.) (292) ............. .............. .................. 3924562 1 1.5060-62 PASS. (6 cyl.) .................. BRACE (6 O.L. x 7/e wide)............. 3771708 1 .4260-61 PASS. (283) .................... BRACE (8 5/32 O.L.) ................... 3774075 1 .4260-63 PASS. (348, 409) (exc. Custom Air

Cond.) ....................... BRACE, used w/pump w/rear mtg. studs 3786873* 1 .8463 Ser. 10 thru 30 (6 cyl.),63 PASS. (6 cyl.) (exc. 62 amp. AC

gen .) ........................ BRACE ............................. 3826038 1 .2863 PASS. w/62 amp. AC gen. (6 cyl.)

(exc. C.A.C.) ................. BRACE ............................. 3826040 1 .4263-64 Ser. 10 thru 30 (6 cyl.),65-66 Ser. 10-30 (292),65 Ser. 10-30 (230) (1st design) ...... BRACE (P/S Installation Unit)......... 3831277 1 .6564-66 PASS. w/62 amp. AC gen. (6 cyl.)

(1st design) .................. BRACE............................. 3843415 1 1.4664-67 PASS. (6 cyl.) (exc. 62 amp. AC gen.),65-67 Ser. 10 thru 30 (230) (2nd design)

(exc. D-D, 62 amp.),68 Ser. 20-30 (exc. D-D) ............ BRACE ............................. 3838446 1 .2864-65 PASS. (409) .................... BRACE ............................. 3852321 1 .8465 Ser. 10 thru 30 (exc. D-D, 4/WD)

w'62 amp. (230) (2nd design),66 Ser. 10 thru 30 (exc. D-D, 4/WD)

w/62 amp. (250) (exc. A.I.R.)(1st design) .................. BRACE (9"/64 O.L.)................... 3867069 1 2.50

6.605-6.606



66 Ser. 10 thru 30 (exc. D-D, 4/WD)w/62 amp. A.C. gen. (250) (exc.A.I.R.) (2nd design) ........... BRACE (6 19/64 O.L.) ................... 3894004 1 2.95

65-66 PASS. (283, 327),66 Ser. 10 thru 30 (283),66 Ser. 10 thru 30 (283, 327),67 PASS. (8 cyl.) (exc. 396, 427) ..... BRACE ............................. 3905366 1 .9565-67 PASS. (396) .................... BRACE ............................. 3876788 1 .8965-68 CORVETTE (396, 427) .......... BRACE ............................. 3878241 1 3.7266 Ser. 10 w/A.I.R. (6 cyl.) (exc.

D-D, 4/WD),66 PASS. (6 cyl.) w/A.I.R.,67-68 Ser. 10 w/A.I.R. (exc. D-D, 292) .. BRACE ............................. 3880842 1 .3366-67 PASS. w/62 amp. AC gen. (6 cyl.)

(2nd design) .................. BRACE ............................. 3888182 1 1.2567 Ser. 10-20 (w/A.I.R., 292) ........ BRACE ............................. 3902059 1 .2567-68 PASS. (6 cyl.) w/A.I.R ........... BRACE ............................. 3901807 1 .3567-68 Ser. 20-30 (292) (exc. A.I.R., D-D),67 Ser. 10 (exc. A.I.R.) (292),68 Ser. 20-30 (D-D) (292)............ BRACE ............................. 3905087 1 .2567-68 Ser. 10 thru 30 (292) (exc. A.I.R.) . BRACE ............................. 3914993 1 .4560-61 PASS. (283) (1st design) ......... SUPPORT, used w/pump w/rear mtg.

67 Ser. 20-30 (CONY.) (exc. A.I.R.)(292),

67 Ser. 10 (exc. A.I.R.) (292) ........ SPACER, pump bracket ............... 3905086 1 .1061-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. STUD (%-16 thd. both ends '

1/6 hex.) ... 5689546 2 .25

64-66 PASS. (6 cyl.) .................. STUD, pump brace to pump (%-16 x66 Ser. 10 thru 30 (230) ............. 219/64) • • • • • • • .. • • .................. 3841932 1 .2567 Ser. 10 thru 30 (exc. D-D) (250),67 PASS. (6 cyl.) ................... STUD ............................... 3904180 1 .3563-67 PASS. (6 cyl.),67 68 Ser. 10-30 (6 cyl.) ................ BOLT, pump brace to gen ( 5/6-18 x 1 3/) . 3826039 1 .0763-67 ALL ........................... BOLT, pump mounting brkt. to support

( 3/e -16 x 3/4),,,,,,,,,,,,,,,,,,,,,,, 3792380 1 .15*NOTE: On 1960 and early 1961 models it will be necessary to use (1) 446363

spacer.

6.608 BODY—HOUSING ASSY.—PIN, Steering Gear Hydraulic Pump

53-54 PASS .......................... .................................... 5665669 1 13.7055-59 ALL ........................... w/connector ....................... 5686387 1 11.7561-63 PASS.,63 CORVETTE,63 Ser. 10 thru 30 .................. HOUSING ASSY...................... 5689458♦ 1 15.95

ANOTE: On 6 cyl. models use (1) 3787460 spacer for front adjusting position.64 ALL, CORVETTE.65 Ser. 10 thru 30 (1st design)....... HOUSING ASSY ...................... 5692825 1 15.95

(f--1967Chevrolet Motor Division 6.606-6.608General Motors Corporation 981

65 Ser. 10 thru 30 (exc. D-D, 4/WD)(2nd design),

65-66 PASS., CORVETTE ............. HOUSING ASSY. ..................... 5692883 1 18.6567 ALL, CORVETTE,68 ALL, CORVETTE (exc. 159) ..... HOUSING ASSY . ..................... 5698116 1 16.7555-59 PASS. w/5685600,55-59 Ser. 3 w/5685600 ................ PIN, dowel.......................... 5686734 2 .1260 PASS . ......................... PIN, dowel (2'/,, O.L. x '/,^ thk.) ........ 5688023 2 .2061-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. PIN, dowel ( 3/1, x 13/,R) ................. 5689357 2 .20

6.609 COVER-GASKET-EXTENSION-KIT-RING-SPACER, Steering Gear

Hydraulic P ump

53-54 PASS . ......................... pump ............................. 56656509 1 14.25®NOTE: Late design eliminates plug, seal and ring. See group 6.612.

55-59 ALL ........................... pump ............................. 5682348 1 8.1053-54 PASS ........................... GASKET, pump cover (4 holes)......... 5664575 1 .2853-54 PASS . ......................... GASKET, pump body (3 holes) ......... 5664569 1 .3363-66 Ser. 10 thru 30 (6 cyl.) ........... EXTENSION, s trg. pump brace

(P/S Installation Unit) .............. 3831279 1 .3553-54 PASS .......................... KIT, gasket......................... 5665729* 1 2.21

*NOTE: Consists of gaskets for pump body, pump cover, reservoir cover, andreservoir cover bolt; two pump ring seals; four gasket spacers.

55-56 ALL57 ALL (1st design) ................ KIT, seal (w/steel and rubber washers) . 5682371

t1 2.50

57-59 ALL (2nd design) ............... KIT, seal (w/copper washers).......... 5685608t 1 1.90tNOTE: Consists of seals for body, pressure plate, reservoir, plug and reservoir

sealing washer.60-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 ................. KIT, seal ........................... 5688044 1 2.4060-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. RING, end plate retaining (3 O.D.)...... 5688014 1 .1568 Ser. 10 (292),68 Ser. 20 (SUB) (292) .............. SPACER, rr. stud..................... 3926099 1 .2568 Ser. 10 (292),68 Ser. 20 (SUB) (292) .............. SPACER, pivot ...................... 3926178 1 .45

6.610 ROTOR-VANE KIT-ROTOR KIT, Steering Gear Hydraulic Pump

53-54 PASS ........................... (1"/z O.D. w/14 teeth).............. 5664585 1 8.9555-59 ALL ........................... .................................. . 5686367 1 7.4553-54 PASS .......................... VANE KIT (consists of 12 vanes)...... 5664610 1 7.1055-59 ALL ........................... VANE KIT (consists of 10 vanes-!/ long) 5682372 1 7.4560-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 ................. VANE KIT (consists of 10 vanes) ...... 5688047 1 7.0055-59 ALL ........................... ROTOR KIT (vanes-)/ long) ........... 5686736 1 23.5060-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. ROTOR KIT ......................... 5690858 1 21.25

6.611 RING-SEAL, Steering Gear Hydraulic Pump

53-54 PASS . ......................... (4 arrows cast on) .................. 5681137 1 8.2555-59 ALL ........................... (4'/ O.D. x Y thk.).................. 5682361 1 8.9553-54 PASS . ......................... SEAL (2 5/8 O.D.) ...................... 5664578 2 .4055-59 ALL ........................... SEAL, body "0" ring (3 ID.).......... 5680593 1 .55

6.612 PLATE-PLATE KIT-SPRING-RING-SEAL-PLUG, Steering GearHydraulic Pump

53-54 PASS .......................... (2'/b O.D.)......................... 5665760 1 4.4855 -59 ALL ........................... cover (2 holes '/e I D.)............... 5682547 1 .1160 PASS .......................... pump end (2 13/ 6 O.D.) ............... 5688024 1 .75



60-67 PASS.,63-67 CORVETTE,63-66 Ser. 10 thru 30 .................. thrust (w/j /,, hole) ................ . 5688027 1 2.6960-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. pressure ("/„ thk.) ................. 5688043 1 3.3061-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. pump end (2 25/„ dia.) ................ 5689358 1 .8967-68 ALL, CORVETTE ............... thrust ............................. 5698121 1 2.7555-59 ALL ........................... PLATE KIT, pressure ......... ...... 5688252 1 3.91

eNOTE: Consists of 1 plate and 4 pins.55-59 ALL ........................... SPRING, flow control (2°/ 6 free length-

9 coils) ........................... 5682367 1 .3055-59 ALL ........................ SPRING, cover plate.................. 5682548 1 .0560-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. SPRING, flow control (1 3 /„ free length) . 5688037 1 .3060 PASS . ......................... SPRING, pressure plate (1 free length). 5688038 1 .1561-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. SPRING, pressure plate ............... 5689359 1 .1553 PASS. (early design) ............. RING, snap ( 47/64

O.D.) ................ 5665828 1 .0853 PASS. (early design),55-59 ALL ........................... SEAL, "0" ring ( '/Z I. D.).............. 5680711 1 .2055-59 ALL ........................... SEAL, pressure plate (l/ ID.)......... 5682364 1 .2060-68 PASS.,63-68 CORVETTE .................... SEAL, "0" ring end and pressure plate63-68 Ser. 10 thru 30 .................. (25l/ I. D.) ......................... 5688034 2 .5055-59 ALL ........................ . PLUG, plunger retainer ( l;/,,, O.D.)...... 5682690 1 .14

6.614 SHAFT, Steering Gear Hydraulic Pump Dr ive

53-54 PASS .......................... (w/seal).......................... 5681951 1 9.5560-66 PASS.,63-66 CORVETTE,63-66 Ser. 10 thru 30 .................. (4/6 O.L.) ......................... 5691606 1 6.3067-68 ALL, CORVETTE ............... .................................... 5698115 1 6.30

6.615 BEARING—KIT—SLEEVE, Steering Gear Hydraulic Pump Drive Shaft

53-54 PASS . ................. ....... (outer)...................., 954211 1 4.2053-54 PASS . ......................... (inner) ............................ 903201 1 2.6453-54 PASS .......................... KIT,repair .......................... 5681964* 1 31.60*NOTE: Consists of: 2 bearings, 1 ring, 1 rotor, 1 seal and 12 vanes. For

models having spring loaded seal.55-59 ALL ........................... SLEEVE, alignment ( '/ 6 O.L.) ......... 5682627 1 .11

6.616 RING, Hydraulic Pump Drive Shaft Oute r Bearing Retaining

53-54 PASS .......................... (2 O.D.)........................... 5665651 1 .6560-68 PASS.,63-68 CORVETTE,63-68 Ser. 10thru 30 .................. ................... ... 5691053 1 .15

6.617 SEAL, Steering Gear Hydraulic Pump Drive Shaft

53-54 PASS ................... . ...... (spring loaded type) (l 46 O.D.)...... 5681410 1 1.0555-59 ALL ............... . ..... . (spring loaded type) (stamped 5682341) 5682341 1 1.0560-66 PASS.,63-66 CORVETTE,63-66 Ser. 10 thru 30 .................. (stamped 5688020) .................. 5688020 1 1.0567 PASS., CORVETTE, Ser. 10 thru 30

(exc. D-D ) .................... .................................... 5686644 1 1.50

©-1967Chevrolet Motor Division 6.612-6.617General Motors Corporation 983

6.624 VALVE ASSY., Steering Gear Hydraulic Pump Control

53-54 PASS . ......................... (includes plunger, guide, ball, spring,screw and shim) .................. 5665656 1 4.15

55-59 ALL ........................... (includes plunger, guide, ball, spring,screw and shim) .................. 5682354 1 4.15

60-64 PASS.,63-68 CORVETTE .................... (includes plunger, guide, ball, spring,63-68 Ser. 10 thru 30 (1st design) ....... screw, filter assy. and shim) ....... 5689397 1 4.4865 Ser. 10 thru 30 (2nd design)....... (includes plunger, guide, ball spring,65-68 PASS . ......................... screw, shim, filter and screw assy.) 5693276 1 4.4867-68 PASS. (8 cyl.) .................. (includes plunger, guide, ball, spring,

screw, shim, filter and screw assy.) 5689396 1 5.24

6.630 FILTER-RETAINER-SPRING- ELEMENT, Hydraulic Steering Pump

55-59 ALL ........................... oil (3l/ 5682358 1 1.1861-64 PASS.,63-67 CORVETTE,63-66 Ser. 10 thru 30,68 Ser. 20-30 (D-D) ................ oil ............................... 5689351 1 2.6455-59 ALL ........................... RETAINER, filter (3 1 /32 I. D. x 3'/ O.D.) . 5682360 1 .1055-59 ALL ........................... SPRING, filter retainer (3 15

4 6 O.D.) ..... 5682366 1 .33

61-64 PASS.,63-67 CORVETTE,63-66 Ser. 10 thru 30,68 Ser. 20-30 (D-D) ................ ELEMENT, filter .................... 5689352 1 1.50

6.635 RESERVOIR ASSY.-RESERVOIR UNIT and PARTS, Steering Gear HydraulicPump

53-54 PASS .......................... .................................... 5681696* 1 7.50*NOTE: Consists of 1 Body, 1 Plate, 2 Gaskets, 1 Bolt and 4 Spacers.

55-57 ALL (1st design) ................ w/3/ bottle-neck tube 5682507 1 3.2557-59 PASS.,57-59 Ser. 3 (2nd design) ............. w/3 straight tube ................. 5687273 1 8.1061-62 PASS.,63 PASS. w/oil bath (6 cyl.),63 PASS. (8 cyl.) .................. .................................... 5689360 1 8.3563 CORVETTE .................... .................................... 5691196 1 9.7063 PASS. (6 cyl.) (exc. oil bath),63 Ser. 10 thru 30 (6 cyl.) ........... .................................... 5690191 1 10.1064 PASS. w/oil bath (6 cyl.),64-65 PASS. (8 cyl.) .................. .................................... 5692848 1 8.1064-66 CORVETTE .................... .................................... 5692845 1 8.1064 PASS. (6 cyl.) (exc. oil bath),64-66 Ser. 10 thru 30,65-66 PASS. (8 cyl.) (exc. 409, 396),67-68 PASS . ......................... .................................... 5692831 1 8.1065-68 PASS. (6 cyl.),68 Ser. 20-30 (D-D) ................ ................................... 5694612 1 8.1065 PASS. w/P/S (396),67-68 PASS. (8 cyl.) .................. .................................... 5696157 1 10.3568 PASS. (exc. 396, 427) ............ ..................................o. 7803755 1 8.5060-63 PASS . ......................... RESERVOIR UNIT, with filter ......... 5689718 1 12.1053-54 PASS .......................... COVER ............................. 5680157 1 2.7855 ALL56-59 ALL ........................... CAP ASSY., oil filler ................. 5687267 1 .7560-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. CAP ASSY., oil filter ................. 5690846 1 1.8455 ALL,57-59 ALL (2nd design) ............... SCREEN, filler ...................... 5685605 1 .6653-54 PASS . ......................... GASKET, cover (5'/ O.D.) ............. 5664930 1 .3353-54 PASS . ......................... GASKET, bolt (1 O.D.) ................ 5664570 1 .1155-59 ALL ........................... SEAL (3"// I.D.) ..................... 5682365 1 .5560-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. SEAL, "0" ring, reservoir ( 4 1/2 I.D.) ... 5688015 1 .75



60-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. SEAL, reservoir bolt ( 29/64 I.D.) ......... 5688109 2 .1555-57 ALL .......................... WASHER, bolt sealing ('YZ I.D. x

1942 O.D.) .......................... 5682369 2 .4057-59 ALL ........................... WASHER, reservoir bolt ............... 5685606 2 .07

6.655 PULLEY—GUARD—NUT—WASHER, Steering Gear Hydraulic Pump

53-54 PASS . ......................... (5Y O.D.) ......................... 3705495 1 2.8060-62 PASS. (6 cyl.),60-64 PASS. (8 cyl.) (exc. 348 Sp.

H./Per., 409),63-67 CORVETTE w/327,63-66 PASS. w/Air Cond. (409) ........ (5474 4 O.D.) ........................ 3770509 1 3.0661-65 PASS. w/Sp. H/Per. (348, 409),65-68 CORVETTE (Spec. H/Per. w/Hyd.

Lifters) (327) (exc. Air Cond.) .. (6'/e O.D.) (stamped 3834720) ......... 3834720 1 5.5063-68 PASS. (6 cyl.),63-68 Ser. 10 thru 30 (exc. 292) ......... (5'/4" O.D.) ........................ 3791943 1 2.6563-66 Ser. 10 thru 30 (292) ............ (54 O.13.)......................... 3894044 1 3.9565-67 PASS. (8 cyl.) (exc. 409, 396)..... (547/64 O.D.) ........................ 3860457 1 2.9565-66 CORVETTE w/Spec. H/Per. (327)

(Hyd. Lifters), C.A.0. ........ (523/, O.D.) ........................ 3868892 1 2.8365-68 CORVETTE (396, 427) .......... (61/2 O.D.) ......................... 3878245 1 7.1066-67 PASS. w/A.I.R. (6 cyl.),66-67 Ser. 10 w/A.I.R. (6 cyl.) (exc.

D-D, 4/WD),68 Ser. 10-20 (250) (exc. D-D) ...... (5 2344 O • D .) ........................ 3880866 1 2.9166-68 PASS. (396, 427) ................ .................................... 3873847 1 4.4567-68 Ser. 10-20 (w/292, A.I.R.) ........ .................................... 3902060 1 4.6067 Ser. 10 thru 30 (292) (exc.

A.I.R., D-D),68 Ser. 20-30 (292) ................ .................................... 3906398 1 5.9567-68 Ser. 20-30 (D-D) (3-53).......... (45/6 O.D.) ......................... 3867027 1 12.2068 PASS. (396) (exc. Spec. H/Per.) ... .................................... 3925537 1 2.9565-66 PASS. (409),65-66 CORVETTE, w/Air Cond., 62 amp.

gen.,67-68 CORVETTE (exc. 396) ........... GUARD, belt ........................ 3890478 1 1.3560-66 PASS.,-63-66 CORVETTE,63-67 Ser. 10 thru 30 .................. NUT, pulley (°/ 6 -18) ................. 3824475 1 .1565-66 PASS. w/Air Cond. (409),66-68 CORVETTE (exc. 427 H/Per.) .... WASHER, belt guard (3B I. D. x "/ 2 O.D.) . 3860454 2 .0567 Ser. 10 thru 30 (CONY., 4/WD) (292) WASHER, pulley washer ............... 3906397 1 .45

6.660 BELT, Steering Gear Hydraulic Pump Dr i ve

53-54 PASS . ......................... (molded 3703633)(49% O.L.)......... 3703633 1 (1.066)60-61 PASS. w/C.A.C., Cool Pack (283)

(1st design) (4214 long) ......................... 3759203 1 (1.066)60-61 PASS. (283) (1st design) (exc.

C.A.C., Cool Pack),60-62 PASS. w/C.A.C., Cool Pack (348

Sp. H/Per., 409),63 PASS. w/C.A.C. (409) ........... (433/4 long) ......................... 3770513 1 (1.066)61-62 PASS. (2nd design) (8 cyl.),63-65 PASS., CORVETTE (8 cyl.)

(exc. 409, 396),63-65 Ser. 10 thru 30 (283),66 Ser. 10 thru 30 (8 cyl.),66 PASS. (8 cyl.) (exc. 396, 427)..... (35 long) .......................... 3848263 1 (1.066)60-61 PASS. (6 cyl.),62 PASS. (6 cyl.) (exc. C.A.C.,

CoolPack) ................... (51 long).......................... 3771706 1 (1.066)60-61 PASS. (348) (exc. Air Cond.,

CoolPack) ................... (45 long).......................... 3770512 1 (1.066)

1-1967Chevrolet Motor Division 6.635-6.660Gewenl Motors Corporation 985

(49 long) ..........................(44 long) ..........................( 37j9/

64 long) .......................

(31% long) .........................(45 long) ..........................(45 long) ..........................(36

14 long) .........................

3845647 1 (1.066)3848252 1 (1.066;3863114 1 (1.066)

3878243 1 (1.066)

3878244 1 (1.066)

3861936 1 (1.066)

3874424 1 (1.066)

(53 long) .......................... 3887693

(52 long) .......................... 3888487(43 34 long) ......................... 3889380

(51 long) .......................... 3885457(30 long) .......................... 3902011

1 (1.066)

1 (1.066)1 (1.066)

1 (1.066)1 (1.066)

54 PASS . .........................55-57 PASS. (6 cyl.) ..................55-57 PASS. (8 cyl.) (exc. T.G.) ........57 PASS. w/T.G . ..................55 Ser. 3 (8 cyl.),56 Ser. 3 ........................55-57 PASS . .........................55-59 Ser. 3 ..........................58-64 PASS . .........................57-59 Ser. 3 ..........................58-59 PASS . .........................60-61 PASS. (1st design) ..............61-64 PASS. (2nd design) ..............63-68 CORVETTE (exc. 396, 427) ......63-66 Ser. 10 thru 30 ..................

62 PASS. w/C.A.C., Cool Pack(6 cyl.),

63-64 PASS. (6 cyl.) (exc. C.A.C.,Cool Pack, 62 amp. AC gen.),

63-65 Ser. 10 thru 30 (230) .............64 PASS. (6 cyl.),65-67 PASS. (exc. 62 amp. AC gen.,

A.I.R.) (6 cyl.),67 Ser. 10 (exc. FFC, C.A.C., H.D.

Cooling) (250),67 Ser. 10 (C.A.C., H.D. Cooling

wIA.I.R.) (250),67 Ser. 20-30 (exc. C.A.C., H.D.

Cooling) (250) ................63-65 Ser. 10 thru 30 (292) .............64-65 PASS. w/Air Cond. (409) .........64-66 PASS. (Air Cond. w/62 amp.)

(6 cyl.),66 Ser. 10 thru 30 (230, 250),67 PASS. w/A.I.R. (6 cyl.),67 Ser. 10 (w/C.A.C., H.D. Cooling)

(exc. 292, D-D, CONY.),67 Ser. 10 (w/C.A.C., H.D. Cooling)

(exc. A.I.R., 292, D-D, FFC),67 Ser. 10 (FFC) (w/H.D. Cooling)

(exc. A.I.R., 292),67 Ser. 20-30 (CONY.) (w/C.A.C.,

H.D. Cooling) (exc. 292) .......64-66 PASS. (w/Access Air Cond.)

(6 cyl.),66 Ser. 10 (w/A.I.R., H.D. Cooling,

C.A.C.) (6 cyl.) ...............63-65 PASS. (409) (exc. Air Cond.)......65-67 PASS. (396, 427) ................65-67 CORVETTE (396, 427) (exc.

C.A.C.) ......................65-67 CORVETTE (396, 427) (exc.

C.A.C.) ......................66-67 CORVETTE (327 Sp. H/Per.)

(exc. C.A.C.) .................66-67 CORVETTE (327) (Sp. H/Per.

w/C.A.C.) ....................66 Ser, 10 thru 30 (292) (exc. H.D.

Cooling, C.A.C.) ..............66 Ser. 10 thru 30 (292) (H.D. Cooling,

C.A.C.) ......................66 CORVETTE (427) (w/C.A.C.).... .67 Ser. 10 (292) (exc. A.I.R.),67 Ser. 20-30 (292) .................67 Ser. 10-20 (292) (A.I.R.) ..........

(505/6 long) ........................ 3814141 1 (1.066)

(49'/ long) ......................... 3845648 1 (1.066)(53 long) .......................... 3764342 1 (1.066)(44'/ long) ......................... 3851318 1 (1.066)

(50 long) .......................... 3850994 1 (1.066)

6.670 HOSE, Steering Gear Pressure

(17 3/4 O.L.) (w/grommet) ............. 5682219

pump to valve (48 long) ............. 3710615pump to valve (39 3/4 long) ............ 3722697pumpto valve ...................... 3745128

pump to valve (36% O.L.) ........... 3722425control valve to cyl. (13'/ 6 long)...... 3710596control valve to cyl . ................ 3722007control valve to cvl . ................ 5688634pump to control valve (pressure hose) . 3745059pump to control valve ............... 3760897pump to control valve (inlet) (yellow

paint) .......................... 3770554pump to control valve (inlet) (light

green paint) ..................... 3795902pump to control valve (inlet) ......... 3826277pump to control valve inlet (P/S

Installation Unit) ................. 3893004

1 9.401 11.951 11.151 10.15

1 8.801 5.201 11.301 3.801 9.351 11.75

1 8.30

1 8.601 4.21

1 7.50



63-66 Ser. 10 thru 30 .................. control valve to cyl. (P/S InstallationUnit) ........................... 3893005 2 3.50

65-67 PASS. (6 cyl.),68 BISCAYNE, BEL AIR (6 cyl.) ..... pump to inlet ...................... 3859864 1 7.0565 PASS. (8 cyl.) (exc. 396, 409),66-67 PASS. (283, 327) ................ pump to inlet ...................... 3874694 1 7.1065 PASS. (409) .................... pump to inlet ...................... 3863932 1 8.4065-66 PASS. (396, 427) ............... pump to inlet ...................... 3875021 1 7.1065-68 CORVETTE (396, 427) ........... pump to control valve inlet .......... 3878886 1 6.2567 Ser. 10-20 (4/WD) ............... left turn ........................... 3896307 1 4.9567 Ser. 10-20 (4/WD) ............... right turn .......................... 3896308 1 4.9567-68 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D-D) ................. left turn (16 long) ................. 3914441* 1 3.2567-68 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D-D) ................. right turn (161 8 long) ................ 3914442* 1 3.25

*NOTE: Support 3914440 may also be required.67 4/WD .......................... pump outlet........................ 3896312 1 7.7567-68 PASS. (396, 427) ................ pump to inlet ...................... 3906961 1 7.9568 PASS. (307, 327) ................ pump to inlet ...................... 3931411 1 7.50

6.671 HOSE, Steering Gear Retur n

53 PASS .......................... (19'/ O.L.) ........................ 5680085 1 9.0555-57 PASS. (6 cyl.) .................. valve to pump (48 long) ............. 3710614 1 8.5055 Ser. 3 (6 cyl.) ................... valve to pump (31 O.L.)............. 3722009 1 7.3055 Ser. 3 (8 cyl.),56 Ser. 3 .......................... valve to pump (36 5/ O.L.)............ 3722426 1 8.4555-57 PASS . ......................... cyl. to control valve (13Y b long) ...... 3710596 1 (6.670)55-59 Ser. 3 .......................... cyl.to control valve ................ 3722007 1 (6.670)55-57 PASS. (8 cyl.) (exc. T.G.) ........ valve to pump (40% long) ............ 3716728 1 8.6557 PASS. w/T. G ................... outlet valve to pump ................ 3745129 1 8.0057-59 Ser. 3 .......................... pump to control valve (return hose) . 1 8.9558-64 PASS . ......................... cyl. to control valve ................ 5688634 1 (6.670)58-59 PASS .......................... valve to pump...................... 3760899 1 6.1060-61 PASS. (1st design) .............. pump to control valve (outlet) (yellow

paint).. ... 3770555 1 6.0561-64 PASS. (2nd design) .............. pump to control valve (outlet) (light

(NOTE:green paint) .................... 3795903t 1 5.75

It may be necessary to cut to required length.63-68 CORVETTE .................... pump to control valve (outlet) ........ 3826278 1 2.0363-66 Ser. 10 thru 30 ................. pump to control valve outlet,65-66 PASS . ......................... pump to gear('/8 I.D.) ............... 3867779 1 (8.962)ALL ALL w/" hose ................. hyd. pump reservoir assy. speedo flex

shaft assy. (rr. eng. support)insulator ........................ 3781387 1 1.30

67-68 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D-D) ................. pump outlet................. 3914425 1 5.5067 4/WD .......................... pump outlet ........................ 3914424 1 10.5068 Ser. 10 thru 30 (396) ............. pump outlet........................ 3933217 1 5.50

6.672 SHIELD-SHIELD ASSY. - CLAMP-GROMMET-BRACKET-BRACKET ASSY.-RETA I N ER- CLIP_SLEEVE-SUPPORT H y draulic Steering Pump Hose

60-64 PASS., POLICE ................. front stabilizer shaft................ 3783275 1 .2455 PASS. (8 cyl.) .................. SHIELD ASSY., control valve to cyl.56 PASS. (8 cyl.) (exc. 4BC) ........ hose heat ......................... 3715004 1 .4755-57 PASS. (6 cyl.) .................. SHIELD ASSY., control valve to cyl.55-57 PASS. (8 cyl.) (exc. T.G.)........ hose heat, pump to control valve hose

heat.............................. 3715008 1 .4755-57 PASS. . . . . . . . . . . . . . . . . . . . . . . . CLAMP, control valve hose grommet (2-55-57 Ser. 3 (8 cyl.) .................. holes)9/32 h ) ..... .... .. .. ........ ... 371 0618 1 .1558-60 PASS. (1st design) .............. CLAMP, control valve hose (w/projection

weld) ........................... 3747207 1 .1460-64 PASS. (2nd design),63-64 CORVETTE .................... CLAMP, control valve hose............ 3783278 1 .1060-62 PASS. (6 cyl.),63-64 PASS., CORVETTE ............. CLAMP, clip hyd. strg. pump to control65-66 PASS., CORVETTE (exc. 409) .... valve outlet and inlet hose assys ..... 3776997 1 .0565-67 PASS. w/P/S (exc. 409, A.I.R.),68 PASS. (327) w/P/S .............. CLAMP, strg. to gear, inlet and outlet . 3874661 1 .0567 Ser. 10 thru 30 (CONY.) .......... CLAMP, pump hose ................... 3907823 1 .45C-1967Chevrolet Motor Division 6.670-6. 672General Motors Corporation 987

3733836 1

2371573 15687538 A.R.

68 Ser. 10 thru 30 (CONV68 Ser. 20-30 (D-D) ................. BRACKET, pump hose ................ 3922930 2 .2555-59 Ser. 3 .......................... GROMMET, valve to cyl. hose (1% long

w/2- 3/8 holes) ..................... 3722012 1 .4055-57 Ser. 3 (1st design) ............... GROMMET, pump to Cont. valve inlet67-68 PANEL, SUB.,67-68 G-10-20 ........................ and outlet hose

(3

I D. x 1'.p O.D.) ... 3722970* 2 .0855-57 PASS. (8 cyl.) .................. GROMMET, pump to valve hose (rubber) 3722698 1 .4057-59 Ser. 3 (2nd design) .............. GROMMET, pump to cont. valve inlet

and outlet hose ('/ I.D. x 1'z O.D.) ... 3745055* 2 .40*NOTE: Used w/hvy. duty frt. axle equipt. on 1 h, TON models.

57-59 Ser. 3 .......................... BRACKET, pump to cont. valve hoseretainer (4 3/4 O.L. w/2-1'/ 6 open holes) 3745057 1 .55

58-60 PASS. (1st design) .............. BRACKET, control valve hose (6 3/ lone) 3744007 1 .2858-64 PASS .......................... BRACKET, control valve hose to frame . 3744008 1 .1463-68 Ser. 10 thru 30 .................. BRACKET, control valve to cyl. hose

(P/S Installation Unit) .............. 5690815 1 .5565 PASS. (409) .................... BRACKET, pump to inlet and outlet hose 3863934 1 .4368 Ser. 10 thru 30 (CONY.),68 Ser. 20-30 (D-D) ................. BRACKET, steering pump hose ........ 3922928 1 1.5060-64 PASS. (2nd design) .............. BRACKET ASSY., control valve hose

(4 long) ........................... 3783276 1 .4755-59 Ser. 3 .......................... CLIP, control valve to cyl. hose (115/,6

long) ............................. 3721558 2 .0565-66 PASS. w 'T.W ................... CLIP, gear hose retaining............. 5692525 1 .2565-68 PASS. (396, 409, 427) ............ CLIP, pump to inlet and outlet hose .... 3864512 1 .1067-68 4/WD .......................... CLIP, cyl. pipe ...................... 3907829 1 .7567-68 4/WD .......................... CLIP, pump inlet and outlet pipe ....... 3907830 2 .7565-66 PASS. (396, 409, 427)............ SLEEVE, pump to outlet hose (sponge

rubber) ............................ 3791806 1 .1963-68 Ser. 10 thru 30 (CONY.) .......... SUPPORT ........................... 3896374 1 .3567-68 4/WD .......................... SUPPORT, at control valve........... 3907828 1 .9567 4/ WD .......................... SUPPORT, cyl....................... 3896309 1 .15

6.673 UNION-FITTING ASSY.-VALVE KIT-SEAT, Steering Gear Hydraulic ValveHose

53-54 PASS .......................... pressure hose, pump end-return hose,valve end (%-18 both ends) ....... 5664020 2 .60

53 PASS .......................... pressure hose, valve end ( 7/ 6 -20 and/, 6 -18 thds.) ..................... 5665614 1 .60

60-63 PASS.,63 Ser. 10 thru 30 .................. FITTING ASSY. w/ filter, pump outlet , 5688039 1 2.6463 CORVETTE .................... FITTING ASSY. w/filter, pump outlet... 5691194 1 2.4564 PASS.,64-68 Ser. 10 thru 30 (1st design) ....... FITTING ASSY. w/filter pump outlet.... 5692841 1 2.3664-68 CORVETTE .................... FITTING ASSY. w/filter pump outlet... 5692843 1 2.3665-67 PASS.,65 Ser. 10 thru 30 (2nd design) ....... FITTING ASSY., w/filter, pump outlet .. 5692823 1 2.3668 PASS (exc. 396, 427) ............ FITTING ASSY ....................... 7803763 1 2.5065-66 PASS .......................... VALVE KIT, strg. gear check valve • ... 5687624 1 .5655-59 ALL ........................... SEAT, pump body connector press. port.

( 2 I.D. x 13/32 O.D.) . . . . . . . . . . . . . . . . 5682339 1 .18

55-59 ALL,60-68 PASS.,

58-59 Ser. 3..........................

65-68 PASS ..........................

X",is O.D.) ........................SEAT, adapter ball stud inner (Bendix

127318) ...........................SEAT..............................

14

10

.20

.55

.23

63-68 CORVETTE .................... SEAT, pump body connector return port.63-68 Ser. 10-30 ...................... ('io I.D. x'1/33 O.D.) . . . . . . . . . . . . . . . . . 5682044 A.R.55-62 PASS .......................... SEAT, valve body pressure port,58-64 PASS.,58-59 Ser. 3,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. steering cylinder ( 3/6 I.D. x ( O.D.) .. 5681757 A.R.55-59 Ser. 3 .......................... SEAT, connector control valve ('/3 z 1.13.

6.672-6.673

©-1 967Chevrolet Motor Division


3713184 13746322 1

3756862 13756575 1

3766028 1

3789755 1

3848297 13779143 1

3818177 13839157 1

.14

.S3

.15

.15

.40

.60

.15

.58

.35

.40

.77.70

.35

.15

6.674 SEAL, Steering Gear Hydraulic Valve Ho se and Fitting "0" Ring

53-54 PASS .......................... pressure hose, pump end—return hose,valve end (°/ 6 I.D.) ............... 5664015 2 .25

53 PASS ............... . .......... pressure hose, valve end ( 1 523 2 I.D.).. 5664142 1 .2053-54 PASS . ......................... used at return port and elbows (°. I.D.) 5665574 A.R. .3560-68 PASS.,63-68 CORVETTE,63-68 Ser. 10 thru 30 .................. pump outlet fitting ( 1 51 6 O.D.) ........ 5688049 1 .1560-68 PASS„63-68 CORVETTE,63-68 Ser. 10 thru 30 ................. "0" ring pump outlet fitting ( 37/ 4 I.D.) 5688035 1 .1560-64 PASS.,63-67 CORVETTE .................... " ring valve reaction spool63-68 Ser. 10 thru 30 .................. (27/4I•D•) ......................... 5681740 1 .10

6.677 PIPE ASSY., Hydraulic Steering

60-64 PASS .......................... pump to control valve inlet .......... 3789813* 1 .63*NOTE: Must be reworked for 6 cyl. engine.

63-68 CORVETTE .................... strg. control valve to extend c yl...... 3826275 1 2.5763-68 CORVETTE .................... strg. control valve to retract cyl. ..... 3826276 1 2.57

6.758 GROMM ET —SEAL—ESCUTCHEON—COVE R and PARTS, Steering Columi

47-53 COMM., UTILITY,54-55 FFC (1st Ser.) .................. strg. gear cowl bracket, rubber (3j b x 154-67 D-D (exc. 102 W.B.) ............. x 53/4).................

*NOTE: Cut 2'e for use on 1949-53 models.47 COMM., UTILITY (exc. COE),48-55 1 TON, UTILITY (1st Ser.) (exc.

COE) ,48-55 /2, i4 TON (1st Ser.),54-55 1 TON w/3-SPD., H.D. (1st Ser.) , . strg. gear, rubber (36 0 bend-4 holes),55-59 Ser. 3 (2nd Ser.),57-59 ALL w/4/WD,60 D

3685524* A.R. .15

3687205 1 .65

-6 7 -D (exc. 102 W.B.) ............. strg. gear, rubber (black)............ 3713192 1 .6555-59 Ser. 3 (2nd Ser.) (exc. D-D)....... strg. gear cowl ..................... 3716500 1 .1563-66 CORVETTE .................... rubber ............................ 3839151 1 .1947-55 COMM., UTILITY (1st Ser.)....... SEAL, toe pan ....................... 3687204 1 .3049-54 PASS .......................... SEAL, toe pan (sponge rubber)......... 3691549 1 .2455-56 PASS .................. . . . ..... SEAL, jacket cover (1 5/e I.D. x 2"/ O D32

x '"16 thk.) ......................... 3717668 1

55-57 PASS. (exc. A.T.) ............... SEAL, jacket and clutch pedal push rod. 3738327 155-57 PASS .......................... SEAL, jacket (felt) ( 3i4 I.D. x 1'; O.D.), , 3715246 A.R.55-57 PASS, ...................... . „ SEAL, jacket (felt) (3, x 151 6 O.D.) , 3721433 155-59 Ser. 3 (2nd Ser.),60-67 D-D (exc. 102 W.B.) ............. SEAL, toe panel (rubber) (5 holes)......58 PASS. W/A.T ................... SEAL, jacket dash (sponge rubber) , , , ,,58-59 PASS. w/4-SPD.,60-64 ALL w/4-SPD. (exc. T.W.),63-64 IMPALA (SUPER SPORT) w/P.G.

(exc. T.W.),63 SPT. CPE. (RPO Z11),65-68 Ser. 10 thru 30 w/4-SPD.

(exc. D-D),65-67 Ser. 10 (D-D) w/4 SPD,68 Ser. 10 thru 30 (D-D) w/4SPD...... SEAL, strg. gear jacket ...............59-60 PASS .......................... SEAL, jacket dash ...................60-62 Ser. 10 thru 30 (exc. D-D),63 4/WD (1st Ser.) ................. SEAL, jacket dash ...................61-67 Ser. 10 (D-D),68 Ser. 10 thru 30 (D-D) ............. SEAL, jacket toe panel ...............61-64 PASS. (exc. A.T.) ............... SEAL, jacket and clutch pedal push rod

dash..............................61-64 PASS. w,/A.T. .. SEAL, jacket dash63-66 Ser. 10 thru 30 (exc. D-D, 4/WD),63-66 4/WD (2nd Ser.) ................. SEAL, jacket dash ...................63-66 CORVETTE .................... SEAL, jacket dash ...................

4-1967

Chevrolet Motor Division 6.674-6.758General Motors Corporation 989

64-68 G-10-20 ........................ SEAL, strg. gear jacket toe panel cover . 3833683 1 .4564-68 G-10-20 ........................ SEAL, strg. column toe panel cover..... 3896238 1 2.2065-66 PASS .......................... SEAL, strg. column cover to dash ...... 3859429 1 .3365-66 PASS . ......................... SEAL, jacket cover to inst. panel ...... 3868777 1 .0567-68 PASS ........................... SEAL, strg.. column to dash cover ...... 7801630 1 .6567-68 PASS. ( w/T.W., A.T.) ........... SEAL, dash ......................... 7800467 1 .8067-68 Ser. 10 thru 30 (exc. D-D) ....... SEAL, dash ......................... 3889829 1 .4567 CORVETTE .................... SEAL, strg. gear jkt. dash............. 3911115 167 CORVETTE .................... SEAL, jacket dash ................... 3897421 1 .1068 CORVETTE .................... SEAL, strg. gear jacket to dash ........ 3921595 1 .1064-66 CORVETTE .................... ESCUTCHEON ....................... 3864321 1 (9.746)49-54 PASS. (exc. P.B.) ............... COVER, strg. gear toe pan seal, rubber

(2 holes x1/32 I. D.; 1"/ 6 I.D.).......... 3691548 1 .67

58-62 CORVETTE .................... COVER, dash holhole ................ .. 37434183743418 1 .2858-62 CORVETTE .................... COVER, lower (casting)............... 3740247 1 2.0759-60 PASS .......................... COVER, jacket dash seal ............. 3772005 1 .8760-62 Ser. 10 thru 30 (exc. D-D),63 4/WD (1st Ser.) ................. COVER, jacket dash seal ............. 3766032 1 .6061-67 Ser. 10 (D-D) ................... COVER, jacket toe panel seal ......... 3789756 1 .6061-62 PASS .......................... COVER, jacket dash seal............. 3779093t 1 .67

tNOTE: Cut 1'4 dia. hole when required.63-66 Ser. 10 thru 30 (exc. D-D, 4/WD),63-66 4/WD (2nd Ser.) ................. COVER, jacket dash seal ............. 3818178 1 .6063-64 PASS . ......................... COVER, jacket dash seal ............. 3824797* 1 .43

*NOTE: It will be necessary to cut hole for clutch rod.64-66 G-10 ........................... COVER, strg. gear jacket toe panel..... 3833681 1 1.6065-66 PASS. (exc. T.W.) ............... COVER, strg. column to dash .......... 3856951 1 .8065-66 PASS . ......................... COVER, strg. column to dash trim ...... 3856953 1 .5367-68 PASS ......................... COVER, strg. column to dash trim ...... 3899593 1 .5567.668 G-10-20 ........................ COVER, strg. gear jkt. toe panel ....... 3884323 1 2.5067-68 PASS .......................... COVER, strg. col. to dash............. 3897561 1 .5555-57 PASS . ......................... SEAT, seal spring (1'/e I.D. x 1'z O.D.) .. 3721435 1 .0555-57 PASS. (exc. P. G.) ............... PLATE, push rod dash seal retainer (3'/8

x 2"46),,,,,,,,,,,,,,,,,,,,,,,,,,,, 3714329 1 .1068 CORVETTE .................... PLATE, strg. column bracket anchor.... 3911114 1 .7563-66 CORVETTE .................... RETAINER, grommet ................. 3839152 1 .1567-68 Ser. 10 thru 30 (exc. D-D) ........ RETAINER, jacket dash seal .......... 3908287 1 .2063-64 PASS .......................... SCREW, jacket and clutch pedal push rod

dash (14-10 x '/e) ................... 3824796 2 .05

6.760 CLAMP-CLAMP UNIT and PARTS, Steering Column

55-56 PASS .......................... jacket, upper (4 74, x 11/8),,,,,,,,,,,,, 3713578 1 .6363-66 CORVETTE .................... jacket lower....................... 3824228 1 .1964-68 G-10-20 ........................ steering gear jacket ................ 262545 1 .8064-67 Ser. 20-30 (D-D) ................. steering gear jacket ................ 5672849 1 .6067-68 PASS .......................... strg. col. to dash cover ............. 3899560 1 .2067-68 Ser. 10 thru 30 (exc. D-D) ........ jkt. upper ......................... 3889979 1 .1068 Ser. 20-30 (D-D) ................ jacket upper...................... 3930637 158-64 PASS.,60-68 Ser. 10 thru 30 (exc. D-D) ........ CLAMP UNIT, jacket, uppr. & lwr.61-65 Ser. 10 (D-D) ................... w/screw .......................... 3813438 A.R. .2847-53 COMM., UTILITY (exc. COE),54-55 FFC (1st Ser.) .................. BRACKET UNIT, cowl w/cap (malleable54-67 D-D (exc. 102 W.B.) ............. iron) ............................ 3847626 1 1.75

®NOTE: Consists of 1 bracket and 1 bracket cap.53-62 CORVETTE .................... BRACKET, cowl upper................ 3706932 1 .3754-55 COMM., UTILITY (1st Ser.)....... BRACKET, cowlupper, steel (2 holes 5/ 6 ) 37b0185 1 .3054-55 COMM., UTILITY (1st Ser.)....... BRACKET, cowl lower, steel (2 holes 34) 3700069 1 .3055-56 PASS . ......................... BRACKET, jacket (4,;,, x 1).......... 3710950 1 .4255-59 Ser. 3 (2nd Ser.) (exc. D-D) ....... BRACKET, cowl lower (45/64 O.L.) ...... 3716498 1 .3555-59 Ser. 3 (2nd Ser.) (exc. D-D)....... BRACKET, cowl upper ................ 3726288 1 .8558 PASS. (exc. IMPALA)............ BRACKET, jacket upper .............. 3746161 1 .4258 PASS. w/P/B ................... BRACKET, jacket lower .............. 3751560 1 .5158 PASS. (exc. P.B.) ............... BRACKET, jacket lower .............. 3750657 1 .8059-60 PASS .......................... BRACKET, jacket upper .............. 3755035 1 .4260 Ser. 10 thru 30 (exc. D-D) ........ BRACKET, jacket lower clamp mtg ..... 3767093 1 1.2061-66 Ser. 10 (D-D) ................... BRACKET, jacket lower .............. 3733304 1 .4563-65 Ser. 10 (D-D) ................... BRACKET, jacket upper .............. 3778445 1 2.2563 CORVETTE .................... BRACKET, dash to strg. column ....... 3823022 1 .61

6.758-6.760

16--1967Chevrolet Motor Division


63-66 Ser. 10 thru 30 (exc. D-D, 4/WD),63-66 4/WD (2nd Ser.) .................. BRACKET, jacket lower .............. 3825786 1 .3564-68 G-10 -20 ........................ BRACKET, rear strg. gear jacket...... 3838707 1 .5064-68 G-10 -20 ........................ BRACKET, front, strg. gear jacket ..... 3838708 1 .5067-68 Ser. 10 thru 30 (exc. D-D) ........ BRACKET, strg. gear jkt. lower........ 3889830 1 .1567-68 Ser. 10 (D-D) ................... BRACKET, strg. gear jkt., lower ....... 3898760 1 2.2567-68 Ser. 10 (D-D) ................... BRACKET, strg. gear jkt., upper ....... 3898747 1 3.2567 PASS . ......................... BRACKET, strg. column supt. ......... 3899559 1 3.7568 PASS .......................... BRACKET ASSY., strg. column support . 3926723 1 3.9568 Ser. 20-30 (D-D) ................ BRACKET ASSY., strg. jacket upper.. . 3930635 1 3.7563 CORVETTE .................... SUPPORT, jacket lower............... 3824226 1 .4364-66 CORVETTE ................... SUPPORT, jacket lower............... 3839156 1 .4364-66 CORVETTE (exc. Tel. W.) ....... SUPPORT, dash to strg. column........ 3839147 1 .6164-66 PASS .......................... SUPPORT, mast jacket ............... 3856816 1 .2964-66 G-10 ........................... SUPPORT, jacket .................... 3860726 1 .8067-68 PASS .......................... SUPPORT, rr., right .................. 3899558 1 .5067-68 PASS ......................... SUPPORT, rr., left ................... 3899557 1 .5067-68 PASS .......................... SUPPORT, frt., right ................. 3899556 1 .5067-68 PASS .......................... SUPPORT, frt. , left .................. 3899555 1 .5068 CORVETTE .................... SUPPORT, strg. column ............... 3918532 1 1.5061-62 PASS .......................... SUPPORT ASSY., strg. gear jacket to

dash.............................. 3777219 1 1.8460-66 Ser. 10 thru 30 (FFC)............ SUPPORT ASSY., strg. gear jacket..... 3823007 1 3.6063 CORVETTE .................... SUPPORT ASSY ..................... 3823017 1 .2463-64 PASS . ......................... SUPPORT ASSY., jacket dash ......... 3828989 1 1.8464-66 CORVETTE (exc. Tel. W.) ....... SUPPORT ASSY ...................... 3839153 1 .2965-66 CORVETTE w/Tel. W............ SUPPORT ASSY., strg. column to

brake pedal ........................ 3869768 1 .8967 CORVETTE .................... SUPPORT ASSY., strg. gear jkt., lower 3897422 1 .9567 CORVETTE .................... SUPPORT ASSY., strg. col. to brk.

pedal brkt . ........................ 3897415 1 1.2567-68 G -10-20 ........................ SUPPORT ASSY., jkt. ................ 3885716 1 .8055-59 Ser. 3 (2nd Ser.) (exc. D-D)....... STRAP, less nut, cowl lower brkt....... 3716499 1 .1555-59 Ser. 3 (2nd Ser.) (exc. D-D) ....... SLEEVE, cowl upr. brkt. insulator (2144

I.D. x % O.D.) ..................... 3716718 2 .0865-66 PASS . ......................... SLEEVE, strg. column to dash cover

seal(rubber) ....................... 383133 1 .1555-57 PASS .......................... PLATE, jacket lower clamp (2 holes- 2 % 4 ) 3710662 1 .1857 PASS .......................... WASHER, support ("/32 I.D. x 1'/4 O.D.) .. 3739664 1 .0565 PASS .......................... WASHER, strg. column to dash cover (1

O.D. x432 I.D. x !; 6 thk.) .......... 587168 4 .0567 Ser. 10 thru 30 (exc. D-D)

w /4-SP D. ,67-68 Ser. 10 (D-D) w/4-SPD ........... WASHER, strg. gear jacket extension ... 3879747 1 (4.012)57-60 PASS.,60-66 Ser. 10 thru 30 (exc. D-D),61 Ser. 10 (D-D) ................... NUT, anchor (/4-20 w/2 holes) ........ 3749682 1 .1559-60 PASS ......................... NUT; jacket housing to steering gear60-62 Ser. 10 thru 30 (exc. D-D)........ (31/ O. L.) ......................... 3759917 1 .20ALLALL .......................... NUT,'/-16, support.................. 1378333 A.R. .05ALLALL........................... SEAL, instrument pnl. strg. gear jacket

cover (rubber-5 3/4 O.L.) ............. 3775180 1 (9.749)62-64 PASS.,62-65 Ser. 10 thru 30 (exc. D-D),62-67 Ser. 10 (D-D) ................... SCREW ( 5/ b -12 x 1 114) strg. gear jacket63-66 CORVETTE .................... upper and lower clamp .............. 3826260 1 .0563-66 PASS.,68 CORVETTE .................... SCREW w/lockwasher, instrument panel,

jacket shroud (#10-16 x 3/e).......... 3820718 A.R. .0564 PASS. w/T.W ................... CLIP, strg. gear jacket spacer......... 3848356 1 .1567 PASS . ......................... BOLT, (Sjy-18 x'/ 6 ) support to column .. 9419028 4 (8.900)68 CORVETTE .................... BOLT, ('/ 6 -18 x 54) column support brkt. 3928894 4 .1067 Ser. 10 thru 30 (exc. D-D) w/4-SPD,67 Ser. 10 (D-D) w/4-SPD. .......... BUSHING, strg. gear jkt. extension ..... 3902564 1 (4.012)

6.765 "U" BOLT, Steering Column

51-54 PASS. (exc. P.B.) .............. (24 depth)......................... 3695644 1 .3063-66 CORVETTE (exc. Tel. W.) ....... (254 depth) ......................... 3823020 1 .35

c-I9676.760-6.765Chevrolet Motor Division .


266316 A.R. 1.30

270 252 1 1.50267102 2 1.20

268077 1 1.20

148418 1 1.40

451974 1 1.30

5687757 1 4.10

6.785 HOUSING, Pitman Shaft

39-48 PASS. (exc. JB, KB) ............. w/seal (forged 264813).............. 264814 1 6.45

6.786 BUSHING—BEARING, Pitman Shaft

38-52 PASS.,38-46 COMM., UTILITY, (exc. COE),47-55 COMM., 1 1/2 TON (1st Ser.) (exc.

D-D, SBC),53-54 PASS. w/P/S,55-68 PASS.,55-59 Ser. 3 (2nd Ser.) (exc. D-D),60-68 Ser. 10 thru 30 (exc. D-D),61-67 Ser. 10 (D-D),63-67 CORVETTE,64-68 G-10-20,68 Ser. 10 thru 30 (D-D) .............39-41 COE,47-55 SBC, 2 TON (1st Ser.),55-57 D-D (2nd Ser.) ..................

48-55 D-D (1st Ser.) .................. .58-67 D-D (exc. 102 W.B.) .............53 -54 PASS. (exc. P/S) ...............53-62 CORVETTE ....................53 -54 PASS. (exc. P/S) ................53-62 CORVETTE ...................65-68 PASS ..........................

6.803 HOUSING, Steering Gear

(11/8 I.D. x 13'8) ....................

(11/4 I.D. x 1 ;/e O.D. x 1^/8 wide) (bronze)

(1Yg I.D. x 1'/4 O.D.) ................ .housing......... ...............

BEARING, housing (1 8/8 I.D. x 13/g O.D.

x1 long) ..........................BEARING, side cover (1 1/s I.D. x 1

3/q O.D.

x 3/4 long) ......................... .

BEARING, (1Y4 I D. x 1% O.D. x 11/4

long)

NOTE: For Steering Gear Housings not listed see Group No. 6.508.47-55 COMM., 1 1 TON (1st Ser.) (exc.

D-D, SBC) .................... (w/bushing)....................... 270279 1 12.0548-53 D-D ........................... (w/bushing and mast jacket)......... 5660835 1 15.6054-55 D-D (1st Ser.) ................... (w/bushing and mast jacket)......... 5665317 1 16.9055-57 PASS. .... .. .. ......... ....... (w /bushing and mast jacket)......... 5671169 1 17.7555 Ser.. 3 (2nd Ser.) (exc. D-D) ....... (w/bushing and mast jacket) ........ 5667978t 1 19.95

tNOTE: On 1955 8 cyl. models it will be necessary to lengthen the lower transmissioncontrol slot using the removed housing as a pattern. Also paint to spec.

55-56 D-D (2nd Ser.) .................. (w/bushing and mast jacket)......... 5670557 1 45.7056 Ser. 3 (exc. D-D) ................ (w./bushing andmast jacket) ......... 5670541 1 21.8557-59 Ser. 3 (exc. D-D) ................ (w/bushing and mast jacket)......... 5672223 1 21.9557 D-D ........................... (w/bushing and mast jacket)......... 5671262 1 46.8558 PASS .......................... (w/bushing)....................... 5671816 1 14.7058 -62 CORVETTE .................... charcoal .......................... 5672873 1 27.1058-62 D-D (exc. 102 W.B.) ............. (w/bushing an d mast jacket)......... 5672176 1 45.6559-64 PASS . ......................... (w/bushing)....................... 5679325 1 17.2060-63 4/WD (1st Ser.) ................. (w/bushing)....................... 5673814 1 23.3060-66 Ser. 10 thru 30 (exc. 4/WD, D-D),61-66 Ser. 10 (D-D) ................... (w/bushing)....................... 5673587 1 23.3063 -68 CORVETTE .................... ( w/bushing) ....................... 5677646 1 24.1063-67 Ser. 20-30 (D-D) ................. (w/bushing)....................... 5692850* 1 47.40

*NOTE: When using on 63 and early 64 vehicles one each of the following parts must also be ordered:3848639 Jacket, 5672849 Clamp, 454891 Bolt, 187119 L-Washer,3722862 Nut.

64-66 G-10 ...........................65-68 PASS. (exc. P/S) ................65-67 PASS. w/P/S ...................63-64 4/WD (2nd Ser.),65-68 4/WD ..........................67-68 G-10-20 ........................67-68 Ser. 10 thru 30 (CONY.),67 Ser. 10 (D-D),68 D-D ...........................68 PASS w/P/S ....................

................................... 5691775 1 25.65

.................................... 5679271 1 24.55

.................................... 5691674 1 35.40

( w/bushing) ...................... 5695230 1 29.25.................................... 5697825 1 25.65

.................................... 5698178 1 23.75

.................................... 5693456 1 37.25

6.785-6.803



2.05

1.13

.47

.50

2.90

2.902.78

3.163.87

6.805 GASKET, Steering Gear Housing

38-48 PASS .......................... pitrnan shaft housing (2 1/ I.D. x 5/64

cork) ........................... 261883 1 10

6.806 BEARING—SEAL, Steering Gear

53-54 PASS. w/P/S ................... worm upper........................ 453896 153-54 PASS. w/P/S ................... SEAL, worm (1 5/2 I.D. x 1 3/4 O. D. x 3/8

thk.) .............................. 5663834 155-68 PASS.,60-68 Ser. 10 thru 30 (exc. D-D),61-68 Ser. 10 (D-D) ................... SEAL, shaft, dust ( 3/, I. D. x O.D.) .. 5668293 163-68 CORVETTE,68 PASS .......................... SEAL, shaft grease ("/,F I.D. x 11% O.D.) 5674114 1

6.807 COVER ASSEMBLY, Steering Gear Housing (also see group 6.518)

41 COE,42-46 COMM., UTILITY,55-59 Ser. 3 (2nd Ser.) (exc. D-D)....... side .............................. 267387 147-55 COMM., UTIL. (1st Ser.) (exc. D-D),55-67 D-D (2nd Ser.) (exc. 102 W.B.).... side w/bushinE (cast 270248) ........ 270247 149-52 PASS .......................... side .............................. 5661335 153-54 PASS. (exc. P/ S),53-62 CORVETTE .................... side..... . ........................ 5665667 153-54 PASS. w/P/S ................... side..... . ........................ 5663821 155-68 PASS., (exc. P/S),60-68 Ser. 10 thru 30 (exc. D-D),61-68 Ser. 10 (D-D),63-68 CORVETTE,64-68 G-10-20 ........................ side w/bushing.................... 5666722 1 2.9065-68 PASS w/P/S .................... side .............................. 5689021 1 4.95

6.809 GASKET—SEAL, Steering Gear Housing Side Cover

41-46 COMM., UTILITY,48-55 D-D (1st Ser.),55-59 Ser. 3 (2nd Ser.) (exc. D-D)....... (.020) ............................. 269298 147-55 COMM., UTIL. (1st Ser.) (exc. D-D),55-67 D-D (2nd Ser.) (exc. 102 W.B.).... (.012) ............................ 270537 149-54 PASS. (exc. P/S),53-62 CORVETTE ................... ( 2 13/32 I.D.)......................... 5660222 153-54 PASS. w/P/S ................... (one 3''/64 hole, four ' 3/34 holes) ....... 5663817 155-68 PASS.,60-68 Ser. 10 thru 30 (exc. D-D),61-68 Ser. 10 (D-D),63-68 CORVETTE,64-68 G-10-20 ........................ (3 holes ".4, I. D.) .................. 5666734 165-68 PASS .......................... SEAL "0" ring ...................... 5686570 1

6.822 ADJUSTER—SCREW, Pitman Shaft

10

10

1010

1055

ALLALL .......................... lash .............................. 266678 1 .5538-40 ALL (exc. HB, JB, KB),41-48 PASS .......................... SCREW, adjuster (

11/6 -18 x'/)......... 262566 1 .35

6.824 COVER—PLUG—RING, Steering Gear Housing End

41 COMM., UTILITY,42-46 COMM., UTILITY (exc. COE),48-55 D-D (1st Ser.),55-59 Ser. 3 (2nd Ser.) (exc. D-D)....... (17/8 -16 thread) (forged 267690)...... . 267690* 1 1.98

*NOTE: When using 267690 on 1941 models, use correct Adjuster as shown in Group 6.830.

C-1967 6.805-6.824Chevrolet Motor DivisionGeneral Motors Corporation 993

42-46 COE ........................... (2'/4-16 thread) (forged 267097)....... 267097 1 2.5547-55 SBC, 2 TON (1st Ser.),55-67 D-D (2nd Ser.) (exc. 102 W.B.) .... (2'/8 -16 thread ..................... 270269 1 1.5565-68 PASS. w/P/S ................... PLUG .............................. 5689010 1 2.6565-68 PASS. w/P/S ................... RING, plug retaining .................. 5689012 1 .30

6.825 GA SKET—SEAL, Steering Gear End Cover

41 COMM., UTILITY,42-46 COMM., UTIL. (exc. COE),48-55 D-D (1st Ser.),53-54 PASS. w/P/S,55-59 Ser. 3 (2nd Ser.) (exc. D-D) ....... .................................... 266052 1 .1442-46 COE .......................... .................................... 269297 1 .1547-55 SBC, 2 TON (1st Ser.),55-56 D-D (2nd Ser.) (exc. 102 W.B.) ..... .................................... 270270 1 .1565-68 PASS. w/P/S ................... SEAL, end plug "0" ring ............. 5689013 1 .65

6.826 BEARING, Steering Gear Worm Lower

53-54 PASS. w/P/S ................... (3/4 x 1'/ O.D.)...................... 453897 1 2.0565-67 PASS. w/P/S ................... gear adj. plug ...................... 5683229 1 1.90

6.828 SHIM UNIT, Steering Gear Lash Adjuster

53-65 CORVETTE,ALL ALL ........................... contains (1) each .063,.065,.067,.069 605142* 1 .55• NOTE: Not used w/P/S on 1965 PASS. models.

6.830 ADJUSTER—ADJUSTER ASSY.—NUT—PLUG ASSY., Steering Gear HousingEnd Cover Worm Bearing

41 COMM., UTILITY,42-46 COMM., UTIL. (exc. COE),47-55 COMM., lY TON (1st Ser.) (exc.

SBC),55-59 Ser. 3 (2nd Ser.) (exc. D-D)....... (17/-16 thread) ..................... 267689* 1 1.79

*NOTE: When using 267689 on 1941 models, use correct Cover as shown inGroup 6.824.

42-46 COE ......................... (2 1/4_16 thread) .................... 267099 1 1.8047-55 SBC, 2 TON (1st Ser.),55-67 D-D (2nd Ser.) (exc. 102 W.B.) .... (2'/e —16 x 1 ) ..................... 270268 1 1.8564-65 G10 ........................... .................................... 5691774 1 5.1049-54 PASS. (exc. P/S),53-62 CORVETTE .................... ADJUSTER ASSY. ................... 5660207 1 2.4555-68 PASS,67-68 Ser. 10 (exc. 4/WD),67-68 Ser. 20 (CONV.) ................. ADJUSTER ASSY..................... 5666681t 1 3.54

tNOTE: When using on 1963 models equipped w/409 eng. w/AIR COND. grind approx.'a inch off the hex portion.

60-66 Ser. 10 (D-D),60-66 Ser. 10 thru 30 (exc. D-D),67 .68 4/WD .......................... ADJUSTER ASSY .................... 5673585 1 4.6563668 CORVETTE .......:........... . ADJUSTER ASSY .............. , , , , , , 5677643 1 4,386168 010-20. . ....... ,,, , , ADJUSTER ASSY : 5691773 1 5,1038-40 COMM., UTILITY ............... NUT, strg. gear ball nut stop lock .... , , 263300 1 .2565-67 PASS . ......................... PLUG ASSY., adjuster valve........... 5686866 1 13.70

6.832 NUT, Steer ing Gear Worm Bearing

41 COMM., UTILITY,42-46 COMM., UTIL. (exc. COE),47-55 COMM., 1

1z TON (1st Ser.) (exc.

SBC),55-59 Ser. 3 (2nd Ser.) (exc. D-D) ....... adjuster lock (2'/4-16 x 2

1/4) .......... 266677 1 .45

6.824-6.832



42-46 COE,49-54 PASS. (exc. P/S),53-62 CORVETTE .................... adjuster lock (1'/8 -16 x 2/4) .......... 267100 1 .4547-55 SBC, 2 TON (1st Ser.),55-67 D-D (2nd Ser.) (exc. 102 W.B.) .... adjuster lock (2'4-16 x 2/8 hex.)...... 270274 1 .4553-54 PASS. w/P/S ................... (1-16 thd.) (1 3/8 hex.) ............... 5682242 1 .7055-67 PASS.,60-67 Ser. 10 thru 30 (exc. D-D),61-67 Ser. 10 (D-D),63-67 CORVETTE .................... adjuster lock (2'/,-16 thread)......... 5676217 1 .5064-67 PASS .......................... adjuster lash (44 6 -20)...... ...... 5685372 1 .4065-66 PASS . ......................... adjuster plug lock (2'/4 -20 x 2/4)...... 5690698 1 .75

6.835 BEARING—BEARING KIT—RACE—CUP—RETAINER, Steering Worm Thrust

38-40 ALL,41-54 PASS. (exc. P/S),53-62 CORVETTE ................... (14 O.D.) ......................... 261866 2 1.0041 COMM., UTILITY,42-46 COMM., UTILITY (exc. COE),47-55 COMM., 1'/2 TON (1st Ser.)

(exc. SBC),55-59 Ser. 3 (2nd Ser.) (exc. D-D)....... (Hy 10790 S) ...................... 179291 2 1.5642-46 COE,47-55 SBC, 2 TON (1st Ser.),55-67 D-D (2nd Ser.) (exc. 102 W.B.).... (13/4 O.D.) (Hy 10899 R) ............. 270266 2 2.1553-54 PASS. w/P/S .................. (244 O.D.) ........................ 5663818 2 2.8055-68 PASS.,60-68 Ser. 10 thru 30 (exc. D-D),61-68 Ser. 10 (D-D),63-68 CORVETTE,64-68 G-10-20 ....................... (14 O.D.) ......................... 5666693 2 .4865 PASS. w/P/S ................... adj. plug upper .................... 5686837 1 1.1565-68 PASS. w/P/S ................... BEARING KIT, upper thrust brg. ....... 5687185 1 3.2565-68 PASS. w/P/S ................... BEARING KIT, lower thrust brg ........ 5687186 1 2.7538-40 ALL,41-54 PASS. (exc. P/S) ............... RACE (1 3/4 O.D. x 1 9/16 I. D. x '/e thk.)53-62 CORVETTE .................... (Tim. X-6-A Bower 6) ............... 259782 2 1.3541 COMM., UTILITY,42-46 COMM., UTILITY (exc. COE),47-55 COMM., 1'4 TON (1st Ser.)

(exc. SBC) ................... RACE (used w/upper bearing) (1 3/4 O.D. x55-59 Ser. 3 (2nd Ser.) (exc. D-D) ....... 1Z'/64I.D. x 2% 4 thk.) (Hy 10790 Z).... 179290 1 1.4742-46 COE .......................... RACE (2 3/ 6 O.D. x 1'/8 I.D. x 27/64 thk.)

(Hy 10983Z) ....................... 178479 1 2.5247-55 SBC, 2 TON (1st Ser.) ........... RACE (218 O.D. x 1

1/ I.D. x 734 2

thk.)55-67 D-D (2nd Ser.) (exc. 102 W.B.) .... (Hy 10899 Z) ...................... 270267 1 2.1565-67 PASS. w/P/S ................... RACE, upper thrust brg. (1 15/ 6

O.D.) . . . . 5686836 1 .3065-67 PASS. w/P/ S ................... RACE, upper thrust brg. (1 67/64 O.D.) .... 5687209 1 .4055-68 PASS.,60-68 Ser. 10 thru 30 (exc. D-D),61-68 Ser. 10 (D-D),63-68 CORVETTE,64-68 G-10-20 ........................ CUP (1Y O.D. x 5/, 6 thk.) .............. 5666683 2 .6455-68 PASS.,67-68 Ser. 10 thru 30 (CONY.) .......... RETAINER, lwr. brg. (1

13

/64 I. D. x lY67-68 Ser. 10 (D-D) ................... O.D.) ............................. 5668489 1 .0565-66 PASS. w/P/S ................... RETAINER, adj. plug bearing.......... 5686872 1 .06

6.840 SEAL—SEAL KIT—SPACER, Steering Gear Th ru s t

65-66 PASS. w/P/S .................. "0" ring, adj. plug (1 25/32 x 1"/ 6 ) .... , 5686527 1 .3065-67 PASS. w/P/S ................... SEAL KIT, adj, plug seal ............. 5687183 1 1.8065-67 PASS. w/P/S ................... SPACER, adj. plug thrust brg. (1 57/64 O.D.) 5687435 1 1.55

`'-1967 6.832-6.840Chevrolet Motor Division .


1 .18

1 .20

1 .14

1 .241 .10

6.84 1 NUT—NUT UNIT, Steering Gear Ball

42-46 COE ......................... (1/8 dia.)(L.H. thread) .............. 267610 1 8.0047-55 COMM., 1'./2 TON (1st Ser.) (exc.

D-D, SBC),53-54 PASS. w/P/S,55-59 Ser. 3 (2nd Ser.) (exc. D-D) ...... (2Y2 O.L.) ......................... 5666036 1 6.3055-58 PASS.,59-64 PASS. w/P/S .................. (214 O.L.) (R.H. thread) ............. 5666690 1 6.3047-55 SBC, 2 TON (1st Ser.),55-67 D-D (2nd Ser.) (exc. 102 W.B.) .... ('/,-28-L.H. thread) ................. 270263 1 8.0048-55 D-D (1st Ser.) .................. (4 holes "/ 2 dia.-2 1/ O.L.) .......... 5666035 1 6.7063-68 CORVETTE .................... (R.H. thread) ...................... 5677095 1 7.5564-68 G-10-20 ....................... (12l/ x 2'/, x 1 15/,) .................. 5666886 1 6.3559-68 PASS. (exc. P/S),60-68 Ser. 10 thru 30 (exc. D-D),61-66 Ser. 10 (D-D) ................... NUT UNIT, w/guide and clamp......... 5675672 1 7.5567 Ser. 10 (D-D) ................... NUT UNIT, w/guide and damn......... 5675673 1 9.90

6.84 2 GUIDE —GUIDE UNIT, Steering Gear Ball Return

42-46 COMM., UTIL. (exc. COE) ....... (R.H. thread) ...................... 267502 442-46 COE .......................... (L.H.thread) ...................... 266497 447-55 COMM., lY TON (1st Ser.) (exc.

SBC),53-54 PASS. w/P/S,55-59 Ser. 3 (2nd Ser.) (exc. D-D)....... (L.H. thread) ...................... 267542 447-55 SBC, 2 TON (1st Ser.),55-67 D-D (2nd Ser.) (exc. 102 W.B.) . .. (L.H. thread) ...................... 270264 463-68 CORVETTE ................... (R.H. thread) ...................... 5677107 165-68 PASS w/P/S .................... ................................... 5676540 255.58 PASS.,99-64 PASS. W/P/S .. . : . : :. . : . . : ...... GUIDE UNIT, w/clamp (R.H. thread) ... 5676231* 1

*NOTE: Consists of 1 bolt & washer assy., 1 clamp, ball return guide, 1 guide, ball return.59-65 PASS. (exc. P/S),60-68 Ser. 10 thru 30 (exc. D-D),61-67 Ser. 10 (D-D),67-68 PASS. (exc. P/S),68 D-D ........................... GUIDE UNIT, w/clamp(R.H.thread).... 5676222 164-68 G-10-20 ........................ GUIDE UNIT, w/clamp................ 5676232t 1

tNOTE: Must be used to replace guides with ball insertion holes.

6.843 CLAMP—S CREW ASSY., Steering Gear Ball Return Guide

41 COE,47-55 COMM., 114 TON (1st Ser.)

.18

.20

.18

.20

.18

.37

.99

1.221.84

(exc. SBC),53-54 PASS. w/P/S,55-59 Ser. 3 (2nd Ser.) (exc. D-D) ...... ( 54 wide) .......................... 566333342-46 COE,47-55 SBC, 2 TON (1st Ser,),60.67 D-D (exc, 102 W; B.) .

+, . , . , , (1:,.1-I, thread) ,,,, , , , , , , 270265

59-60 PASS. w/5673143 (e#c. P/S),60-62 Ser. 10 thru 30 w/5673584 and

5673642 (exc. 4/WD, D-D)...... ('/ wide) .......................... 567277763-68 CORVETTE .................. ( / wide, R.H. thread) ............... 567710665-68 PASS. w/P/S ................... .................................. 568653960-68 PASS. (exc. P/S),60-68 Ser. 10 thru 30 (exc. D-D),61-67 Ser. 10 (D-D),63-68 CORVETTE,68 D-D ........................... SCREW ASSY., w/lockwasher (12-28 x 5/,,,) 5674113 3 .15

6.841-6.843



6.844 BALL—BALL KIT, Steering Gear

42-59 Ser. 3-4,53-54 PASS. w/P/S,55-59 PASS.,60-66 ALL,63-66 CORVETTE,67-68 Ser. 10 thru 30 (exc. D-D),67-68 Ser. 10 (D-D),67-68 G-10-20,68 Ser. 10-20 (D-D) ................. (/32 dia.) .......................... 266800 A.R. .0565-68 PASS. w/P/S ................... BALL KIT (code #6) (1-size under) ..... 5695512 1 1.8965-68 PASS. w/P/S ................... BALL KIT (code #7) (std.) ............ 5695513 1 1.8965-68 PASS. w/P/S ................... BALL KIT (code #8) (1-size over) ...... 5695514 1 1.8965-68 PASS. w/ P/S ................... BALL KIT (code #9) (2-sizes over) ..... 5695515 1 1.8965-68 PASS. w/P/S ................... BALL KIT (code #10) (3-sizes over) .... 5695516 1 1.8965-68 PASS. w/P/S ................... BALL KIT (code #11) (4-sizes over) .... 5695517 1 1.89

6.850 SHAFT UNIT—SHAFT, Steering Gear Pitman

39-48 PASS. (exc. JB, KB) ............. .................................... 609941* 1 15.5047-55 COMM., 1'/2 TON (1st Ser.) (exc.

D-D, SBC) .................... .................................... 3847342* 1 12.9547-55 SBC, 2 TON (1st Ser.),55-57 D-D (2nd Ser.) .................. .................................... 3847343* 1 12.9548-55 D-D (1st Ser.) ................... .................................... 3690100* 1 10.9549-50 PASS . ......................... roller (stamped 262605) (1.770 O.D.).. 3690519* 1 15.6050-52 PASS . ......................... roller (stamped 263281) (1.750 O.D.) .. 3695603* 1 15.6053-54 PASS. (exc. P/S) ............... .................................... 3703611* 1 15.3553-54 PASS. w/P/S ................... .................................... 5680374* 1 13.6053-62 CORVETTE .................... .................................... 3707787* 1 18.2055-59 Ser. 3 (2nd Ser.) (exc. D-1)) ....... .................................. ,o 3719624* 1 12.9558-67 D-D (exc. 102 W. H.) ............. .................................... 39318'19fi 1 13:50

tNOTE: Consists of 1 gear, I bushing, 1 packing, 1 gasket, and 1 retainer.60-66 Ser. 10 thru 30 (exc. D-D, 4/WD),61-66 Ser. 10 (D-D) ................... .................................... 3770638® 1 17.95

eNOTE: Consists of 1 gear, 2 bushings, 1 seal assy., and 1 gasket.55-57 PASS . ......................... SHAFT, w/gear...................... 5666698 1 11.7558-64 PASS.,65-68 PASS. (exc. P/S),67-68 Ser. 10 thru 30 (CONY.),67 Ser. 10 (D-D),68 (D-D) .......................... SHAFT, w/gear ...................... 5671822 1 10.5060-68 Ser. 10-20 (4/WD) ............... SHAFT, w/gear ...................... 5691671 1 16.2563-68 CORVETTE .................... SHAFT, w/gear ...................... 5677096 1 11.7564-68 G-10-20 ........................ SHAFT ............................. 5692480 1 14.2065-68 PASS. w/P/S ................... SHAFT, w/gear ...................... 5692950 1 16.20

*NOTE: These units include Steering Gear Pitman Shaft with necessary bushings, gaskets,packings, and packing retainers to make an installation.

6.855 PACKING—SEAL—SEAL ASSY.—SEAL UNIT—WASHER, Pitman Shaft

47-55 SBC, 2 TON (1st Ser.),55-57 D-D (2nd Ser.) .................. strg. shaft (1'/32 I.D. x 1 4 144 O.D. x "/ 6 ) 269299 1 .3058-59 D-D,60-67 D-D (exc. 102 W.B.) ............. strg. shaft......................... 269337 1 .3039-48 PASS. (exc. JB, KB),53-54 PASS. (exc. P/S),53-62 CORVETTE .................... SEAL, pitman shaft grease ............ 263463 1 1.10

C-19676844-6855Chevrolet Motor Division 6.844-6.855


38-46 ALL (exc. EB, EC, ED, Q, FB,FC, FD, R, JA, KA, AG, AH,BG, BH, DJ, DK, COE),

47-55 COMM., 1½ TON (exc. SBC)(1st Ser.),

49-52 PASS.,53-54 PASS. w/P/S,55-64 PASS.,55-59 Ser. 3 (2nd Ser.) (exc. D-D),60-68 Ser. 10 thru 30 (exc. D-D),61-67 Ser. 10 (D-D),63-68 CORVETTE,64-68 G-10-20,65-68 PASS. (exc. P/S),68 (D-D) ..........................65-68 PASS. wP/S ...................65-68 PASS. w/P/S ..................

SEAL ASSY. (1'/,, O.D. x '/,) ........... 5670325 1 .60SEALUNIT ......................... 5685355 1 3.16WASHER, back-up seal ................ 5684477 2 .30

6.856 RETAINER-RING, Pitman Shaft Packing

47-55 SBC, 2 TON (1st Ser.),55-57 D-D (2nd Ser.) .................. (1 23/32 O.D. x 113

/33).................. 259808 1 1558-59 D-D,60-67 D-D (exc. 102 W.B.) ............ (11 0 I.D. x 1 3/4 O.D.) ............... 259960 1 1265-68 PASS. w/P/S ................... RING, seal retaining.................. 5682898 1 25

6.859 ARM - KIT-PLATE ASSY., Pitman

38-42 UTILITY (exc. COE),46 1 TON, UTIL. (exc. COE)........ (forged 594654) .................... 594653 1 4.2547-50 QL, QV, QW, QX, RL, RV, RW,

RX, SL, SV, SW, SX, TL, TV,TW, TX, TY .................. (forged 3683253) ................... 3683279 1 5,95

47-50 COMM., (1Y, TON (exc. D-D, SBC),51-52 COMM. (exc. D-D) ............... (forged 3683299) ................... 3683297 1 5.9547-50 COE ........................... (forged 3684947) ................... 3684945 1 8.1048-52 D-D ........................... (forged 3687491) ................... 3687489 1 4.5049-54 PASS. (exc. P/S) ................ (forged 3691185) ................... 3691183 1 5.1051-55 11, TON (1st Ser_) (exc. SBC),53-55 COMM. (1st Ser.) (exc. D-D) ...... (forged 3694905) ................... 3694905 1 4.9551-55 SBC. 2 TON (1st Ser.) (exc. COE) . (forged 3694893) ................... 3694893 1 5.9551-55 COE .......................... (forged 3694919).................... 3694919 1 7.7053-54 PASS. w/P/S ................... (forged 3704297).................... 3704295 1 4.8653-55 D-D (1st Ser.) .............. ..... (for ged 3699698) ................... 3699698 1 .49555-57 PASS. (exc. P/S) ................ (forged 3719487) ................... 3719485 1 5.3055-57 PASS. w/P/S ................... (forged 3709453) ................... 3709453 1 5.6055-59 Ser. 3 (2nd Ser.) (exc. D-D) ....... single taper (forged 372893) ......... 3728393 1 5.9555-57 D-D (2nd Ser.) .................. single taper (forged 3728439) ........ 3728439 1 5.8556-62 CORVETTE .................... (daub of black or yellow paint)....... 3733446 1 5.8058-62 PASS.,63-64 PASS., w/P/S,63-68 CORVETTE w/P/S ............. (forged 3741383) ....... 3741 383 1 5 3058-59 Ser. 3 (D-D) w/8 x 19.5; 7.00 x

18 tires,60-67 Ser. 20 (D-D) w/17" tires,60-67 Ser. 30 (D-D) ............... (for ed 3750111)) .................. 3750111 1 6.7058-59 Ser. 3 (D-D) w/7 x 17.5; 8 x

17.5 tires,60-67 Ser. 20 (D-D) (exc. 17 11 tires) ..... (daub of white) ..................... 37517071 1 6.70

-,NOTE: Not used w/8 x 19.5; 7.00 x 18; 7.50 x 17 (8 ply) tires.60-62 4/WD (1st design) ............... w/stud (stamped 5673580) ........... 5673580 1 13.8560-66 Ser. 10 thru 30 (exc. 4/WD, D-D),61-66 Ser. 10 (D-D) ................... w/stud (raised 3767052) ............. 3767052 1 7.5062-66 4/WD (2nd design) ............... w/o stud .......................... 5675803 1 13.8563-64 PASS. (exc. P/S) ................ w/stud (forged 3820407)............. 3820345 1 6.4563-68 CORVETTE (exc. P/S) .......... (forged 3829451) ................... 3829451 1 6.1063-66 Ser. 10 thru 30 (exc. D-D, 4/WD) , , (forged 5690643) (P/S Installation Unit) 5690643 1 12.1064-66 G-10 .......................... (forged 3834089) ................. . 3834089 1 5.6065-66 PASS. (exc. P/S) ................ (forged 3855955) ................... 3864703 1 4.6065-66 PASS. w/P.S .................... (forged 3855956) ................... 3864707 1 5.30

6.855-6.859



55-57 D-D (2nd Ser.) ................. (/4-l6 x % thick-1'/4 hex.)........... 25429153-68 PASS.,55-59 Ser. 3 (2nd Ser.),60-68 Ser. 10 thru 30,63-68 CORVETTE,64-68 G-10-20 ........................ ('/s I.D. x 1'/ O.D. hex.) ............. 25877941-46 COE,47-48 COMM., UTILITY (exc. COE) ..... L/WASHER ( 1 13

/32 O.D. x 3/4 I. D. x 3/6

55-57 D-D (2nd Ser.) .................. thick) ............................ 26477263-64 PASS . ......................... WASHER, arm to relay rod............. 379357865-66 PASS . ......................... WASHER, pitman arm ball stud (

=1/32 ) . . . . 3868658

55-62 CORVETTE (8 cyl.) ............. STOP (7 5/8 long) ...................... 3714622

63 PASS . ......................... SEAL, arm to relay rod................ 374479665-66 PASS.,65-66 TAXI w/P/S .................... SEAL, relay rod stud (

19/32 I.D. x 11/32

O.D.) ............................. 5693027

1 .15

1 .35

1 .101 (6.897)1 (6.897)

.921 (6.898)

2 (6.898)

67-68 PASS. w%P/S ................... (forged 3900559) ................... 3900559 167-68 PASS. (exc. P/S) ................ (forged 3900557) ................... 3900557 167-68 Ser. 10 thru 30 (CONY.) w/P/S,68 Ser. 20-30 (D-D) ................. (forged 3896363) ................... 3896363 167-68 Ser. 10 thru 30 (exc. 4i'WD, P/S) .. (forged 3889238) ................... 3889238 167-68 Ser. 10-20 (4/WD) (exc. P/S) ...... .................................... 3887775 167-68 G-10-20 ........................ .................................... 3887749 167 Ser. 10-20 (4/WD) w/P/S ......... (forged 3896718) ................... 3896713 155 % TON (2nd Ser.) ................ KIT, steering linkage conversion ....... 3732311t 155 3/„ 1 TON (2nd Ser.)(exc. D-D) .... KIT, steering linkage conversion ....... 3732307t 155 D-D (2nd Ser.) .................. KIT, steering linkage conversion....... 3732301T 140-48 PASS. (exc. KB) ................ PLATE ASSY. (forged 3651544) ........ 3651534 1

tNOTE: Required for early 1955 2nd Ser. models having double taper assembly detail. Con-sists of 1 strg. and 3rd arm, 1 pitman arm, and 1 rod assy.

5.054.90

6.257.255.755.609.50

(6.870)(6.870)(6.870)

6.05

6.861 NUT-LOCK WASHER-WASHER-STOP-SEAL, Pitman Arm

38-54 ALL (exc. P/S),53-62 CORVETTE,55 COMM., UTILITY (1st Ser.),

6.862 BUSHING, Pitman Arm

39-48 PASS. (exc. JB, KB) ............. .................................... 599643 4 .45

6.865 ABSORBER ASSY.-BRACKET-BOLT, Steering Shock Absorber

63-68 CORVETTE (exc. P/S, F.I., Spec.H/Per.) ...................... strg. shock........................ 3178100 1 10.00

63-68 CORVETTE (exc. P/S, F.I., SpecH/Per.) ...................... BRACKET, shock absorber frame....... 3830242 1 1.11

63-68 CORVETTE (exc. P/S, F.I., Spec.H/Per.) ...................... BRACKET, relay rod ................. 3830243 1 .53

63-65 CORVETTE (P/S, F.I., Spec.H/Per.) ...................... BOLT, absorber to bracket('/, 6 -20 x 2/4 ), 3815933 2 (0.662)

63-67 CORVETTE (exc. P/S, F.I., Spec.H/Per., 427) .................. BOLT, bracket to relay rod ('/ 6 -20 x 1

1/) 3707480 A.R.(6.172)

6.870 ROD ASSEMBLY-ROD-KIT, Steering Connecting (with internal parts)

39-46 COE ........................... ( 3/4 in. dia. rod.)....................47-52 COMM. (exc. D-D),47-50 UTIL. (exc. COE) ............... ....................................47-51 CUE ........................... ....................................48-52 D

-D . .... .............. ....................................51-55 UTIL. (1st Ser.) (exc. CUE),53-55 COMM. (1st Ser.) (exc. D-D) ...... ....................................52-55 CUE ........................... ....................................53-55 D-D (1st Ser.)................... ....................................53-62 CORVETTE .................... front .............................53-62 CORVETTE .................... rear ..............................

3847673 1 5.85

3699489 1 7.953693941 1 7.703690281 1 7.35

3696469 1 7.953696467 1 7.953700038 1 7.753707968 1 4.723707969 1 3.39

©-1967 6.859-6.870Chevrolet Motor Division .


55-57 PASS. (exc. P/S) ................ relay ............................. 3713921 1 8.2555-57 PASS. w/P/S ................... relay ............................. 3710561 1 8.2555-59 Ser. 3 (2nd Ser.) (exc. D-D, P/S) ., with stud w /%2 dia. hole in thd. end .. 3729927 1 8.7555-57 D-D (2nd Ser.),58-59 D-D w /19" tires (exc. H.D.),60-67 Ser. 20 (D-D) w/17" Tires,60-67 Ser. 30 (D-D) ................... .................................... 3854947 1 8.7555-59 Ser. 3 w/P/S ................... .................................... 3733864T 1 14.25

tNOTE: On early 1955 2nd Ser. having double taper assembly detail; appropriate 3rd Arm(6.103) and Pitman Arm (6.859) must also he installed.

58-62 PASS. w/P/S ................... relay ............................. 3740402 1 7.4558-62 PASS. (exc. P/S) ................ relay ............................. 3750827 1 8.2558-59 Ser. 3 (D-D) w/7 x 17.5 tires,60-66 Ser. 20 (D-D) (exc. 17" tires) ..... .............. .................... 3854945 1 8.9560-62 4/WD (1st design) ............... (tubular rod w/o studs).............. 5673395 1 10.5062 4/WD (2nd design),63 4/WD (lst design) ............... .................................... 3819477 1 7.8563-68 CORVETTE (exc. P/S) .......... relay ............................. 3831668 1 15.2564-66 G10 ........................... .................................... 3854941 1 8.5063-64 4/WD (2nd Ser.),65-66 4/WD .......................... .................................... 3854943 1 7.5065-66 PASS . ......................... .................................... 3893383♦ 1 7.90

ANOTE: When using in place 3872045 use (2) 5693027 seals.67-68 G-10-20 ....................... .................................... 3887745 1 8.5067-68 4/WD (exc. P15) ................ .................................... 3887717 1 7.9567 4/WD w/P/5 .................... . . ............................... .. 3896301 167 PASS.,68 PASS (exc. ST A. WAG.) .......... .................................... 3900553 1 7.9568 ST A. WAG ...................... relay ............................ 3931493 160-62 Ser. 10 (exc. 4/WD) .............. ROD, relay .......................... 3769285 1 7.9060-66 Ser. 20-30 (exc. 4/WD, D-D) ...... ROD, relay .......................... 3766485 1 7.9063-66 Ser. 10 (exc. 4/WD, P/S) ......... ROD, relay .......................... 3817957 1 8.2563-64 PASS. (exc. P/S) ................ ROD, relay.. ........................ 3826479 1 8.2563-64 PASS. w/P/S ................... ROD,relay.......................... 3826485 1 7.1063-68 CORVETTE w/P/S .............. ROD, relay .......................... 3822683 1 8.0063-66 Ser. 10 w/P/S (exc. D-D, 4/WD) ... ROD, relay .......................... 5691508 1 21.5063-66 Ser. 20-30 w/P.S. (exc. D-D, 4/WD) ROD, relay .......................... 5690649 1 23.6067-68 Ser. 10 (CONV.) w/P/S .......... ROD, relay .......................... 3896368 1 21.5067-68 Ser. 20-30 (CONY.) w/P/S........ ROD, relay .......................... 3896369 1 23.6067 Ser. 10 (CONY., D-D) (exc. P/S) . . ROD, relay .......................... 3889233 1 7.9567 Ser. 20-30 (CONY.) (exc. P/S) .... ROD, relay .......................... 3889234 1 7.9568 Ser. 20-30 (exc. 4/WD, P/S) ...... ROD, relay .......................... 3922994 1 8.2555 '2 TON (2nd Ser.) ............... KIT, steering linkage conversion ....... 3732311* 1 21.7555 ',, I TON (2nd Ser.) (exc. D-D).... KIT, steering linkage conversion ....... 3732307* 1 21.7555 D-D (2nd Ser.) .................. KIT, steering linkage conversion....... 3732301* 1 25.75

*NOTE: Required for early 1955 2nd Ser. models having double taper assembly detail.Consists of 1 strg. and 3rd arm, 1 pitman arm, and 1 rod assy.

END UNIT-SOCKET ASSY.-SLEEVE_CLAMP, Steering Connecting Rod

49-54 PASS. (exc. P/S) ............... w/L.H. threads (at 3rd arm) ......... 3690842* 1 3.5449-54 PASS . ......................... w/R.H.threads (at pitman arm) ...... 3690844* 1 3.54

*NOTE: Consists of 1 rod, 2 seats, 2 plugs, 1 spring, and 1 seal.53-54 PASS. w/P/S ................... SOCKET ASSY., w/L.H. threads (at front

end) .............................. 3704303 1 2,6453-62 CORVETTE .................... SLEEVE, adjusting (°/ 6 -18 both ends) .. 3706037 1 1.0349-54 PASS . ......................... SLEEVE, adjusting ('/ 6-8 thd.) ........ 3687942 1 1.3653-62 CORVETTE .................... CLAMP, sleeve ...................... 599234 2 (6.234)

6.874 UNIT-SEAT-STUD-NUT, Steering Connecting Rod

38-40 ALL (exc. JA, KA, KH),41-52 COMM., UTILITY (exc. U, V),49-54 PASS . ......................... (ball type)......................... 608840* A.R. 2.85

*NOTE: Consists of 2 springs, 3 plugs, 4 seats and 2 safety rivets.38-40 ALL (exc. JA, KA, KH),41-52 COMM., UTILITY (exc. U, V),49-57 PASS.,53-62 CORVETTE,60-62 4/WD .......................... SEAT, ball.......................... 595586 A.R. .47

6.870-6.874

©-1 967Chevrolet Motor Division

1 000 General Motors Corporation

55-64 PASS. w/P/S,63-68 CORVETTE w/P/S63-68 Ser. 10 thru 30 w/P/S............ SEAT, adapter ball (1 O.D.) ........... 264946 2 .4755-59 Ser. 3 w/P/S ................... SEAT, adapter ball stud (Bendix 126478) 3733852 2 .5058-62 PASS. (exc. P/S),63-68 CORVETTE (exc. P/S) .......... SEAT, ball stud ...................... 3741378 2 .4260-62 4/WD .......................... SEAT, ball stud (axle end) ............ 269641 2 .5055-57 PASS. w/P/S ................... STUD, ball ( 2 13/ 6

O.L.-7/ 6 -20 thd.) ..... 5681722 1 1.1555-59 Ser. 3 w/ P /S ................... STUD, adapter ball (2/4 O.L.) (Bendix

126643) ........................... 3733861 1 5.2558-62 PASS. w/P/S,63-66 Ser. 10 thru 30 w/P/S............ STUD, adapter ball (2 1

/ O.D.-14-20 thd.) 5685461 1 1.27

58-62 PASS. (exc. P/S) ................ STUD, ball (2 / 6 O.L. - 12-20 thd.) ...... 3741384 1 .6063-68 CORVETTE (exc. P/S) .......... STUD, ball .......................... 3829448 1 .6055-57 Ser. 3 (2nd Ser.) ................ NUT, 3rd arm and pitman arm attach.

( 5/8 -18) ........................... 274639 2 (8.917)

6.876 SPRING, Steering Connecting Rod

38-40 ALL (exc. JA, KA, KH),41-52 COMM., UTILITY (exc. U, V),49-54 PASS.,53-62 CORVETTE ................... (2542 free length) ................... 335976 A.R. .4553-62 CORVETTE .................... front ( 15/ 6 free length)............... 3706040 2 .4055-57 PASS. (exc. P/S) ................ ball seat ( 1 3/32 free length) ........... 3714814 2 .3555-59 Ser. 3 w/P/S ................... ball seat (1'/ 6 free length) (Bendix

126120) ......................... 3733839 1 .3058-62 PASS. (exc. P/S),63-68 CORVETTE (exc. P/S) .......... ball stud (1 free length) (4'a coils).... 3741385 2 .4560-62 4/WD .......................... (1 free length) (2 coils) ............. 268005 2 .40

6.881 PLUG, Steering Connecting Rod End

38-39 ALL (exc. JA),40-52 COMM., UTILITY (exc. U, V),49-62 PASS. (exc. P/S),55-68 CORVETTE (exc. P/S),60-62 4/WD .......................... rod end (1ys-18 thread x '/z O.L.) .... 335977 A.R. .3553-62 CORVETTE .................... front (1 1/ 6 -18 thread x x '/2

O.L.)

(notched) ........................ 3706038 1 .35

6.882 PLUG, Steering Connecting Rod Safety

38-40 ALL (exc. JA, KA, KH),41-52 COMM., UTILITY (exc. U, V),49-54 PASS.,53-55 'z, 34 TON (1st Ser.) (exc. D-D).... ('/ dia. x 1 O.L.-1 dia. head)........ 595587 2 .2555-57 PASS. (exc. P/S) ................ (3142 dia. head x 1 1/8

O.L.) ........... 3707752 A.R. .2055-57 PASS. w/P/S ................... adapter safety ( 63/64

dia. head x"/ 6O.L.) ........................ 5680971 1 .61

38-40 ALL (exc. P, Q, JA, KA, KH),41-48 COMM., UTILITY,49-52 ALL (exc. U, V),53-54 PASS . ......................... (used as ball seat plug) ('/ dia. x53-62 CORVETTE .................... "/6 O.L.-1 dia. head)............. 354456 A.R.(6.255)60-62 4/WD .......................... (7/6 dia. x 3 132 O.L. -31/2 dia. head). , , , 5663568 2 .25

6.886 SEAL—COVER—SHIELD—CLAMP, Steering Connecting Rod

49-54 PASS.,53-62 CORVETTE .................... (molded 3705009) ................... 3705009* 2 .24

*NOTE: On units equipped w/P/S quantity required is one.55-57 PASS . ......................... (1 I.D. x 1 14 O.D. x "/32 thick) ........ 3707838 1 .1055-57 PASS. w/P/ S ................... control valve ball stud °/ 6 I.D. x

',B O.D. x'/4 thk.) ................. 3710372 1 .0555-59 Ser. 3 w/P/S ................... control valve ball stud ( 3/4 I.D. x

1'/e O.D. x 7 thk.) ................ 3762879 1 .20

v-1967Chevrolet Motor Division 6.874-6.886General Motors Corporation 1001

55-59 D-D (2nd Ser.),60 Ser. 10 thru 30 (exc. 4/WD),61-64 Ser. 20-30 (exc. 4/WD, D-D) , . , . , , tie rod ball stud,62-64 4/WD .......................... connecting rod ball stud ( 3/4 I.D. x64 G-10 ........................... '/ O.D. x '/B thk.)................. 3826598 A.R.(6.111)58-62 PASS. w/P/S ........... ....... control valve ball stud (

1/2 I.D. x

63-68 Ser. 10 thru 30 w/P/S ............ 1 O.D. x 3/e thk.) .................... 3736289 1 .0758-62 PASS. (exc. P/S) ................ relay rod ( h1/ 6

I.D. x'/a thk.) ......... 3742908 1 .1060-67 Ser. 10 thru 30 (exc. 4/WD, D-D, P/S),61-67 Ser. 10 (CONY., D-D) (exc. P/S) .. ball stud ( 23/32 I.D. x 1Y4 O.D.) ........ 3762357 A.R. .1063-68 CORVETTE .................... relay rod (

15/ 6 I. D. x 1'/ 6 O.D.) ....... 3829450 1 .38

65-67 Ser. 20-30 (D-D) ................. tie rod socket (1°/ 6 I.D. x 2 O.D. x% thk.) .......................... 38282000 2 .15

65 PASS . ......................... relay rod stud...................... 5676207 2 (6.898)67 G-20 ........................... tie rod socket...................... 3828209 2 .1555-57 PASS . ......................... COVER (2'/8 O.L.) .. ............... 3707839 1 .1055-57 Ser. 3 w/P/S ................... COVER, valve dust (2' 4 O.L.) (Bendix

126481) ........................... 3733854 1 .3058-62 PASS. (exc. P/S) ................ COVER, relay rod (2 21/32

x 1 5/ 6 ) ......... 3742909 1 .1558-59 Ser. 3 w/P/S ................... COVER, valve dust (2 1/4 x 1 1/4)... 2371557 1 .3055-57 PASS. w/P/S ................... SHIELD, adapter dust (2 1/8 O.L.)........ 5681776 1 .1458-62 PASS. w/P/S,63-65 Ser. 10 thru 30 w/P/S............ SHIELD, adapter dust (1 1/ O.L.) ........ 5685468 1 .0563-66 CORVETTE,67-68 CORVETTE (exc. P/S) ......... CLAMP, relay rod seal ................ 3930896 1 .15

6.895 L EVER ASSEMBLY, Steering Idler

55-57 PASS. (exc. P/S) ................ (forged 3709426) ................... 3719956 1 4.5555-57 PASS. w/P/S ................... (forged 3707745) ................... 3719953 1 5.2058-60 PASS . ......................... (forged 3744789) ................... 3829078 1 5.5060-62 Ser. 10 thru 30 (exc. 4/WD, D-D),61-62 Ser. 10 (D-D),63-66 Ser. 20-30 (exc. 4/WD, D-D) ...... (forged 3766487) ................... 3767057 1 7.5061-64 PASS.,63-66 Ser. 10 (exc. 4/WD) .............. (3 longitudinal ridges on support)..... 3820387* 1 6.40

*NOTE: 3820389 Spacer must also be used.63-67 CORVETTE .................... (forged 3779185) ................... 3779 184 1 6.4065-66 PASS, (1st design) .............. ................................... 3896518 1 6.1065-66 PASS (2nd design),67 PASS . ......................... .................................... 3900562 1 6.4567 Ser. 10 thru 30 (CONY.),67 Ser. 10 (D-D),68 Ser. 10 thru 30 (exc. 4/WD) ....... .................................... 3889235 1 6.1068 PASS ......................... .................................... 3926965 1

6.896 SUPPORT, Steering Idler

55-57 PASS . ......................... lever ('/-20 thread) (81/ 6 O.L.)....... 3719955 1 3.1558-60 PASS. ............ .. .. lever (forged 374797) ............... 3744797 1 3.1560-62 Ser. 10 thru 30 (exc. 4/WD, D-D),61-62 Ser. 10 (D-D),63-66 Ser. 20-30 (exc. 4/WD, D-D) ...... arm (forged 3766489) ............... 3766489 1 3.4567 Ser. 10 thru 30 (CONV.),67 Ser. 10 (D-D),68 Ser. 10 thru 30 (exc. 4/WD) ....... .................................... 3889237 1 3.15

6.897 B US H ING-WASHER-N UT -BOLT-SPACER, Steering Idler

55-57 PASS . ......................... lever (1'/ 6 O.D. x 21/ O.L.) .......... 3714575 1 .9055-57 PASS . ......................... lever, steering relay rod ( 5/ I.D. x

1'/2 O.D.) ....................... 3714574 1 .7555-57 PASS . ......................... WASHER, steering idler lever; steering

relay and tie rod ( 33/64 ) 3720973 A.R. .1063-64 PASS., CORVETTE,65-68 CORVETTE .................... WASHER, idler lever to relay rod ( 5/e) ... 3793578 1 .0565-66 PASS. (exc. P/S) ................ WASHER, idler lever to relay rod ( 2 x/32 ) .. 3868658 1 .0567 PASS . ......................... WASHER ( 2S/64) strg. relay and tie rod asm. 382588 2 .05



66 PASS, , , , , , , , , , , , , , , , , , , , , , , , NUT, strg. idler to frame ( 1/4-20) ....... 9422293 1 (8.917)

55-57 PASS . ......................... BOLT, idler lever support ('8-24 x 37/e) . 3743308 2 (6.509)

61 PASS . ......................... BOLT, idler lever support, long('e-24 x 4'/) ....................... 189334 1 (8.900)

61 PASS . ......................... BOLT, idler lever support, short('/e-24 x 4) ........................ 189331 1 (8.900)

61-64 PASS . ......................... SPACER, lever support (recessed both63-66 Ser. 10 (exc. 4/WD) ............. ends) ............................. 3820389* 1 .10

*NOTE: Must be used with 3820387 Lever only.

6.898 SEAL, Steering Idler

58-60 PASS . ......................... lever bearing,61-62 PASS.,63-66 Ser. 10 (exc. 4/WD) .............. lever stud,63-64 PASS.,63-67 CORVETTE .................... lever to relay rod................... 3744796 A.R. .0761-64 PASS.,63-66 Ser. 10 (exc. 4/WD) ............. lever support,63-68 CORVETTE .................... lever (l4 dia.) ..................... 3779196 1 .1061-62 Ser. 10 thru 30 (exc. 4/WD, D-D),61-62 Ser. 10 (D-D) ................... arm ( 3/4

I.D. x 1'/4 O.D. x 5/ 6 thk.) ..... 3762357 2 (6.886)

65-67 PASS . ......................... idler lever dust.................... 5674658 1 .1065-68 PASS.,65-66 TAXI w/ P.S . ................... relay rod stud ("/ 2 I. D. x 1'/33 O.D.) , :. 5693027 1 .66

©-1967Chevrolet Motor Division 6.897-6.898


CHEVROLET PARTS AND ACCESSORIES CATALOGtoms427impala.info/CT/68Parts/Parts-Gp6.pdf · chevrolet...

Documents

Transcript of CHEVROLET PARTS AND ACCESSORIES CATALOGtoms427impala.info/CT/68Parts/Parts-Gp6.pdf · chevrolet...