Chemical Composition, Mechanical, Physical and Environmental Properties of SS 2343,Steel...

download Chemical Composition, Mechanical, Physical and Environmental Properties of SS 2343,Steel Grades,Special Alloy,

of 1

description

SS2343

Transcript of Chemical Composition, Mechanical, Physical and Environmental Properties of SS 2343,Steel...

  • Page 1Chemical composition, Mechanical, physical and environmental properties of SS 2343,Steel Grades,Special Alloy,

    22/03/2014 1:01:32 PMhttp://www.steel-grades.com/Steel-Grades/Special-Alloy/ss-2343.html

    Home Steel Grades Commonly Material Steel Grade Representation Equivalent Grade Element

    Download Search

    Steel grades category

    Stainless SteelTool SteelCarbon SteelAlloy SteelMould SteelTi AlloyHigh AlloyStructure SteelTool Steel And Hard AlloySpecial SteelHeat-Resistant SteelBoiler & Pressure Vessel PlateValve SteelSpecial Alloy

    Steel grades search

    Search

    Equivalent steel grade

    Rolling bearing steelspring steelheat resistant steelstainless acid-resisting steelStainless steelHigh-speed tool steelAlloy tool steelCarbon Tool Steel

    Sponsored Links

    Contact sales:TEL:+86-816-3646575Mobile:+86-15386639257E-mail: [email protected]

    Category Type Steel grade Standard Country USESteel Grades Special Alloy SS 2343

    SS 2325

    SS 2326

    SS 2327

    SS 2328

    SS 2331

    SS 2332

    SS 2333

    SS 2337

    SS 2338

    SS 2340

    SS Sweden Swedish SS standard

    stainless steel and heat

    resistant steel

    SS 2343

    buy ammonium thiocyanateyinduchem.com

    Sodium Thiocyanate China professional manufacturer

    DATA TABLE FOR:STEEL GRADES:SPECIAL ALLOY:SS 2343Chemical composition % of the ladle analysis of grade SS 2343

    C() Si() Mn() P() S() Cr() Ni() Mo()Max 0.05 Max 1.0 Max 2.0 Max 0.045 Max 0.03 16.0-18.5 10.5-14.0 2.5-3.0

    SS Steel Grades Steel Equivalent ASTM A36 Steel 4140 Alloy SteelMechanical properties of grade SS 2343Technological properties of grade SS 2343Hardness and heat treatment specification of grade SS 2343

    Annealing

    hardness

    HBS

    Cold pull

    hardness

    HBS

    Preheating

    temperature

    Quenching temperature

    Holding

    time

    min

    Hardening

    medium

    Temper

    temperature

    After tempering

    hardness

    HRCsalt-bathfurnace

    controlled atmospherefurnace

    235 262 788 1191 1204 515 air cooling 522 60

    Steel plate/Sheet

    thickness / mm

    b

    MPa

    s

    /MPa

    Samples from the standard for 50 mm (2 in)

    180 of cold bending test

    longitudinal horizontalHot-rolled/Cold rolling:5 - 150 520 415 1618 2a 3.5a

    Note:(1) listed in the table apex diameter (d), to steel thickness (a) multiples said.(2) in the ASTM A6 standard specified scope can meet any additional conditions.(3) from the standard for 50 mm (2 in).Mechanical propertiesMechanische EigenschaftenCaracteristiques mecaniquesReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite delasticite minimaleRm Tensile strength / Zugfestigkeit / Resistance a la tractionA Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimalJ Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

    SS 2343 steel description:Step Shaft: steel plate/sheet,coil,round bar,flat bar,tube/pipe,Profiled forgingsSS 2343 steel Specifications or Size:

    Round bar:Diameter : 1mm-2000mmSquare bar:Size: 50mm * 50mm-600mm *600mmPlate steel/flat bar:Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mmTube/pipe:Size: OD: 6-219mm WT: 1-35 mm.Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mmHot-rolled sheet: Thickness:6-80mm Width: 210-610mm

    Current Location:Home Steel Grades Special Alloy SS 2343 SS 2343 PDF Download SS 2343 Word Download