Checking and implementing electrical objects IN A BuIlDINg ...CANECO B IM +33 (0)1 47 52 95...
Transcript of Checking and implementing electrical objects IN A BuIlDINg ...CANECO B IM +33 (0)1 47 52 95...
CA
NE
CO
BIM
www.alpi-software.com
Caneco BIM is a software tool allowing electrical data exchange between a BIM project and ALPI’s suite of software.Caneco BIM is used to check and input electrical information in a Building Information Model. Electrical data are then exported onto Caneco BT to define the cross section cables and the protective devices.Finally, Caneco results are reimported to enhance BIM project.
Exchange electrical data from the BIM project with other participants
Import/ExportwithCanecoBT.
ExporttoAutoCAD®usingCanecoImplantation.
ExportprojectdatatoExcel.
ExporttheentireprojecttoCanecoformat.
Check and validate electrical installation designed with Autodesk® Revit® MEP,using Caneco BT
Facilitates joint work between the Autodesk® Revit® MEP technologyandCanecoBTstandards.
Recognises and translates all Revit object families having electricalconnections.
Allows to define the power requirement mode in either Autodesk®Revit®MEPorCanecoBT.
Adjustscableslengthsbyaddingratiopercentage.
Updates automatically electrical properties of Revit objects aftercalculationandsizingontoCanecoBT.
Forward the 3D numerical model of the electrical installation to contractor working with AutoCAD® software
Facilitates joint work between the Autodesk® Revit® MEP andAutoCAD®softwarestandards.
Providesspecificdetailsofcablesroutingincabletrays.
Managedandoptimizedcabletrayscongestion.
Facilitatesprintingreportsofcablecardsandcuttingbook.
Allows the installer to enhance all the electrical installation detailsreceivedfromthenumericalmodeldesigner.
Checking and implementing electrical objectsIN A BuIlDINg INFORMATION MODEl
TREE ChECk VIsuAl ChECk syNOPTIC ChECk INTEgRITy ChECk
CA
NE
CO
BIM
+33 (0)1 47 52 95 41 - [email protected]
5 good reasons to choose Caneco BIM
Fast visual checking of an installation in Autodesk® Revit® MEP
Withthreeviewingmodes,theusercanquicklychecktheintegrityofanelectricalprojectinRevit.
Connection between Autodesk® Revit® MEP and Caneco BT
Without any loss of data, Caneco BIM lets you interface your Revit electrical project with Caneco BT electrical system designandschematicssoftware.
Automatically generates a diagram equivalent to the installation described in Revit
CanecoBTautomaticallygeneratestheschematiclayoutimportedfromaRevitproject.
Constitutes a complete electrical design file from a BIM project
The layout information described in Autodesk® Revit® MEP is used in Caneco BT to print out the complete design calculationsandtheguaranteeofcompliancewithstandards.
Retrieving the electrical data from a Revit project in AutoCAD
CanecoBIMcanexportaAutodesk®Revit®MEPelectricalprojecttoAutoCAD®andaddelectricalintelligencetoit,withnoneedtoredefinetheelements,thelayoutandtheequipment.
Who is it for?
ForelectricalenergylayoutspecialistsindesignofficesthathaveadoptedAutodesk®Revit®MEP.
ForprojectmanagerswhowishtomakeaquickcheckonanelectricallayoutcreatedinaBIMplatform.
ForinstallersnotequippedwithAutodesk®Revit®MEPwhowishtofinalisetheirdetailedfilesusingAutoCAD®.
Additional software
updates, maintenance
Annualmaintenancecontractincludingtelephonehelplineandsoftwareupdates.
Training
CanecoBIMisforexperiencedusersoftheAutoCAD®orAutodesk®Revit®MEPenvironment.
ALPIoffersaone-dayCanecoBIMtrainingcourse.
TheALPItrainingcenterisATC(AutodeskTrainingCenter)approved.
Recommended configuration
Windows64bitsenvironment.
Hardware(USBdongle)orsoftware(FlexLM)keyprotection.
16.1
1.20
12
Aut
od
esk
,Aut
oC
AD
®,A
uto
de
sk®R
evi
t®M
EPa
rere
gist
ere
dt
rad
em
ark
so
rtra
de
ma
rks
ofA
uto
de
sk,I
nc
.,an
d/o
rits
sub
sidia
ries
an
d/o
raffi
liate
sin
th
eU
SAa
nd
/oro
the
rco
untr
ies.