Chart StableS Specifications & Prices · 2 01233 611123 [email protected] planing. We...

Chart StableS Specifications & Prices

Manufacturer of quality

equestrian buildings

including Stables,

Mobile Field Shelters &

American Barns

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.2 01233 611123 [email protected] www.chartstables.co.uk

ContentS

STATic Field ShelTerSSpecifications 11

Prices 12

Frequently Asked Questions 14

STABleSSpecifications 4

Prices 6

compare the ranges 7

AMericAN BArNSSpecifications 9

Prices 9

MoBile STABleS & Field ShelTerSSpecifications 10

Prices 12-13

More photographs are available on our website www.chartstables.co.uk 3All prices exclude VAT. Prices include installation

Delivery ChargesAvon £280 Kent FREE

Bedfordshire £195 Lancashire DIY

Berkshire £210 Leicestershire £260

Buckinghamshire £185 Lincolnshire POA

Cambridgeshire £185 London £120

Channel Islands POA Middlesex £140

Cheshire POA Norfolk POA

Clywd DIY Northamptonshire £245

Cornwall £540/£840 Northumberland DIY

Cumbria DIY Nottinghamshire £300

Derbyshire £340 Oxfordshire £190

Devon POA Powys DIY

Dorset £275 Shropshire £360

Dyfed DIY Somerset £330

Essex £75/£150 Staffordshire £325

Glamorgan – Mid/South POA Suffolk £225

Glamorgan – West DIY Surrey FREE

Gloucestershire £320 Sussex – East FREE

Gwent DIY Sussex – West £150

Gwynedd DIY Warwickshire £250

Hampshire £165 Wiltshire £270

Herefordshire £300 Worcestershire £300

Hertfordshire £160 Yorkshire – South POA

Humberside DIY Yorkshire – North DIY

ContaCts & DeliveryCHART STABLES+44 (0)1233 611123

[email protected]

CHART GARDEN BuILDINGS+44 (0)1233 229898

[email protected]

CHART GARAGES+44 (0)1233 229898

[email protected]

FENCING SALES OFFICE+44 (0)1233 626188

[email protected]

UK & European Sales OfficeChart House, Dencora Way, Ashford, Kent TN23 4FH

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.

The BudGeT rANGeWAll coNSTrucTioN ANd clAddiNGWalls are built with 75mm x 50mm (3" x 2") timber, spaced at a maximum of 600mm centres (2’) and clad with 16mm x 150mm (⅝" x 6”) Shiplap boarding all pressure treated.

rooF coNSTrucTioNPurlins are 100mm x 50mm (4” x 2”) held in place by the joist holders and covered with black Onduline roof sheeting.

doorSStable doors are 2085mm high, 1219mm wide and 50mm thick (6' 10" high, 4' wide x 2" thick) . lower doors are lined with 18mm oS Kickoarding and include a 50mm x 50mm x 50mm anti-chew strip capping the top of the lower doors only. Top doors are ledged and braced. Doors are hung on 450mm tee hinges (16”) and include a 200mm (8”) pad bolt, a kick-over latch and cabin hooks all of which are galvanised. All stable doors are pressure treated.

WiNdoWSStable windows are available as an optional extra.

KicKBoArdSStables are lined to 1220mm with 11mm oS Kickboarding.

exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4’).

GuTTeriNG100mm half round black guttering is fitted to the front of all units.

heiGhTTo eaves 2235mm and ridge 2968mm including brickwork.

hAY SToreS ANd TAcK rooMShay Stores and Tack rooms are not lined as standard. in the case of hay Stores the front panels include 2400mm wide openings.

The cliPPer rANGeWAll coNSTrucTioNWalls are built with 75mm x 50mm (3" x 2") pressure treated timber framing, spaced at 600mm (2') centres.

WAll clAddiNGSelected high-quality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard available as an option. All boarding fixed with rust-resisting nails.

rooF coNSTrucTioNPurlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses, boarded with 11mm oSB and then covered with black onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured onduline, felt, onduvilla tiles or felt tiles.

doorSStable Doors are 2085mm high, 1219mm wide, 50mm thick, (6' 10" high, 4' wide x 2" thick). Bottom doors are lined with 18mm (¾") OS boarding. Top doors are ledged and braced. Anti-chew strips are fitted to the top of the lower doors extending 380mm (15") down the front. All door fittings heavy-duty and galvanised, to include 350mm (14") adjustable hook and band hinges to top stable doors and 450mm (18") to the bottom doors, 200mm (8") pad bolts, heavy-duty kickbolts and a cabin hook to the top and bottom stable doors. Tack Room Doors are 762mm (30") wide, ledged and braced and fitted with a 200mm (8") pad boltand a cabin hook. All stable doors are pressure treated.

WiNdoWSA fully-opening 460mm x 660mm (18" x 26") Perspex window, lined on the inside with a safety mesh, is fitted to each Stable.

cleAr rooF SheeTone clear roof sheet positioned in rear of roof of each stable, for substantial added light from the rear.

KicKBoArdSStables are lined to 1219mm (4') high with 15mm (⅝”) OS kickboarding. Tack Rooms and Hay Stores are not lined as standard but can be lined if required.

VeNTilATioNLouvred ventilation grille is fitted to gable ends of all Stables.

exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4') and can be underlined as an optional extra.

GuTTeriNGHalf round, black guttering and downpipe is fitted to the front of all units. Rear guttering available as an optional extra.

heiGhTTo eaves, measures 2235mm (7' 4") and to ridge 2968mm (9' 8") including brickwork.

TAlK GrilleSCan be fitted between Stables as an option.

4 01233 611123 [email protected] www.chartstables.co.uk

Stable SPeCifiCationS

The chArT rANGeWAll coNSTrucTioNWalls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, spaced at 600mm (2') centres.

WAll clAddiNGQuality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding fixed with rust-resisting nails.

rooF coNSTrucTioNPurlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses boarded with 11mm oS Board, then covered with black onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured onduline, onduvilla tiles or felt tiles.

doorSStable Doors are 2085mm x 1219mm x 70mm, (6' 10" x 4' x 2¾"). Bottom doors are lined with 18mm (¾") OS Kickboard. Top doors ledged and braced. Anti-chew strips are fitted to the top door surround and to the top of the lower door extending down 380mm (15"). All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges to top stable doors and 600mm (24") to the bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and a cabin hook to the top and bottom stable doors. Tack Room Doors are 838mm (33") wide, Shiplap clad, framed, ledged and braced and fitted with a 200mm (8") pad bolt and cabin hook. All stable doors are pressure treated.

WiNdoWSA 533mm x 915mm (21" x 36") two-bladed louvred window, with a fixed clear perspex lower section, fitted to front of each Stable. Heavy duty galvanised bars fitted to the rear.


KicKBoArdSStables are lined to 1219mm (4') high with 18mm (¾") oS kickboards. Tack rooms and hay Stores are not lined as standard, but can be lined if required.

VeNTilATioNLouvred ventilation grilles are fitted to gable ends of Stables only.

exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4’ ) and can be underlined as an optional extra.

GuTTeriNGHalf round, black guttering and downpipe fitted to the front of all units. Rear guttering available as an optional extra.

heiGhTTo eaves, measures 2362mm (7' 8") and to ridge 3095mm (10' 2"), including brickwork.

TAlK GrilleSOne 1162mm x 864mm (46" x 34") galvanised talk grille fitted between stables as standard.

TiMBer TreATMeNTAll timber is pressure treated (not including roof purlins) adding to the longevity of your buildings.

hAY SToreS ANd TAcK rooMShay Stores and Tack rooms are not lined as standard. in the case of hay Stores the front panels include 2400mm wide openings.

STA

Bl

eS

More photographs are available on our website www.chartstables.co.uk 5

The cheSTer rANGeWAll coNSTrucTioNWalls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, at 600mm (2') centres.

WAll clAddiNGSelected high-quality Shiplap boarding 19mm x 125mm (¾" x 5"), pressure treated to ensure a long maintenance-free life. Weatherboard available as an option. All boarding fixed with rust-resisting nails.

rooF coNSTrucTioNPurlins are 150mm x 50mm (6" x 2") spaced at 600mm (2') centres, held in place by joist holders on prefabricated trusses boarded with 11mm OS Board, finishing before the centre of the roof to allow for good airflow and ventilation, then covered with black Onduvilla light weight tiles. one clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes includes alternative red and brown onduvilla tiles, and the option to upgrade the roof to take clay tiles or slate tiles.

doorSStable Doors are 2235mm x 1219mm x 75mm (7' 4" x 4‘ x 3") in a pressure treated frame measuring 100mm x 75mm (4" x 3") with rounded edges. Top and bottom doors are faced with TGV cladding. Bottom doors are lined with 18mm (¾") heavy-duty plywood kickboard. Top doors are ledged and braced, vertical bracing to the leading edge, and can be fully lined. Anti-chew strips encase the complete door frame and to the top door leading edge and the top of the lower door extending down 380mm (15"). All door fittings are heavy duty and galvanized; to include 600mm (24") adjustable hook and band hinges to top and bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks to all doors. Tack Room Doors are 914mm (3') wide x 2235mm (3' x 7' 4") morticed, ledged and braced frame, rebated and infilled with TGV, lined with 12mm (½") plywood, fitted with a five levered morticed door lock and a cabin hook. inward opening as standard. All stable doors are pressure treated.

WiNdoWSA six-bladed louvre window measuring 533mm x 915mm (21" x 36") is fitted to each Stable and is fully adjustable from the outside. Heavy duty galvanised bars fitted to the rear.


KicKBoArdSStables are lined to 1219mm (4') high with 18mm (¾") Ply kickboards (and can be lined to eaves height, as an option). hay Stores are not lined as standard but can be lined as an option extra.

VeNTilATioNLouvred ventilation grilles are fitted to gable ends of Stables only.

exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4’) and can be underlined in exterior-grade plywood. canopies can be increased to 1800mm (6') and include 150mm x 150mm (6" x 6") support posts, strengthened headers and attractive curved bracing.

GuTTeriNGHalf-round, black guttering and downpipe are fitted to the front of all units. Rear guttering available as an optional extra.

heiGhTTo eaves, measures 2464mm (8' 1") and to ridge 3438mm (11' 4"), including brickwork.

TAlK GrilleSOne 1727mm x 864mm (68" x 34") galvanised talk grille fitted between all stables as standard.

TiMBer TreATMeNTAll timber is pressure treated (not including roof purlins) adding to the longevity of your buildings.

Stable PriCeS


All prices exclude VAT. Prices include installation - refer to page 3 for delivery charges

Budget clipper chart chester

loose Boxes 3.6m x 3.6m (12' x 12') £1,425 £1,995 £2,745 £3,425

extra unit: £1,195 £1,545 £2,345 £2,945

4.2m x 3.6m (14' x 12') £2,395 £3,375 £3,995

extra unit: £1,845 £2,730 £3,495

Foaling Box 4.8m x 3.6m (16' x 12') £2,495 £3,595 £4,225

corner units 4.8m x 3.6m (16' x 12') £1,645 £2,095 £2,945 £3,375

5.4m x 3.6m (18' x 12') £2,295 £3,075 £3,485

Tack rooms 1.8m x 3.6m (6' x 12') £695 £945 £1,245 £2,115

2.4m x 3.6m (8' x 12') £795 £1,095 £1,475 £2,545

3.6m x 3.6m (12' x 12') £1,375 £1,795 £2,895

integral hay Stores 3.6m x 3.6m (12' x 12') £875 £1,195 £1,645 £1,895

5.4m x 3.6m (18' x 12') £1,425 £1,945 £2,595 £2,995

7.2m x 3.6m (24' x 12') £1,645 £2,325 £3,175 £3,645

9.1m x 3.6m (30' x 12') £2,195 £3,075 £4,075 £4,650

10.9m x 3.6m (36' x 12') £2,525 £3,475 £4,650 £5,395

covered Walkway 1.8m x 4.8m (6' x 16') £895 £1,195 £2,045

2.4m x 4.8m (8' x 16') £1,045 £1,375 £2,435

3.0m x 4.8m (10' x 16') £1,195 £1,545 £2,595

3.6m x 4.8m (12' x 16') £1,295 £1,735 £2,740

Archways 3.6m x 4.8m (12' x 16')

3.6m (12') to eaves, 4.3m (11') to ridge

£3,250

3.6m x 4.8m (12' x 16')

3.7m (12.2') to eaves, 4.6m (15') to ridge

£4,125


OPTION FOR DIYAll buildings excluding our Budget range, are available for diY collection and self assembly, with a 20% saving off the unit price of each building.

Budget clipper chart chester

Wall construction 75mm x 50mm (3" x 2") 75mm x 50mm (3" x 2") 100mm x 50mm (4" x 2") 100mm x 50mm (4" x 2")

Wall cladding 16mm x 150mm (⅝" x 6") 16mm x 150mm (⅝" x 6") 16mm x 150mm (⅝" x 6") 19mm x 125mm (¾" x 5")

eaves height 2235mm (7' 4") 2235mm (7' 4") 2362mm (7' 9") 2464mm (8' 1")

ridge height 2968mm (9' 8") 2968mm (9' 8") 3095mm (10' 2") 3488mm (11' 4")

roof Purlins 100mm x 50mm 125mm x 50mm (5" x 2") 125mm x 50mm (5" x 2") 150mm 50mm (6" x 2")

Treatment Tanalith e Tanalith e Tanalith e Tanalith e

Kickboard 11mm (½”) OS Board 15mm (⅝" ) OS Board 18mm (¾") oS Board 18mm (¾") Ply

roof Boarding optional extra oSB 11mm (7/16") oSB 11mm (7/16") oSB 18mm (¾")

roof covering Black onduline Black onduline Black onduline Black onduvilla light weight tiles

Window Optional Extra Fully opening Two bladed louver Six bladed louver

Window Protection optional Safety mesh Safety mesh Galvanised Safety bars Galvanised Safety bars

clear roof Sheet To all Stables and Tack rooms To all Stables and Tack rooms To all Stables and Tack rooms To all Stables and Tack rooms

door height 2085mm (6' 10") 2085mm (6' 10") 2085mm (6' 10") 2235mm (7' 4")

door Width 1219mm (4') 1219mm (4') 1219mm (4') 1219mm (4')

Anti-chewstrip to Bottom

Stable doorcapping the top of bottom door

capping top of door and extending

down 381mm (15") to the front





Anti-chewstrip to Top

door SurroundNot available optional extra

chewstrip to top door opening

surround

chewstrip encasing complete

door frame

Anti-chewstrip encasing

door FrameNot available Not available Optional extra

chewstrip encasing complete

frame

door hinging 450mm (18") 450mm (18") 600mm (24") 600mm (24")

canopy 1219mm (4’) 1219mm (4') 1219mm (4') 1219mm (4')

Talk Grilles Not available Optional extra 1162mm x 864mm (46" x 34") 1727mm x 864mm (68" x 34")

Guttering 100mm (4") half round 100mm (4") half round 100mm (4") half round 100mm (4") half round

STA

Bl

eS


StableS ComPare the rangeS


The cliPPer rANGe The chArT rANGe The cheSTer rANGe


Clipper Range

2235

mm

to E

aves

2945

mm

to R

idge

3581mm Gable End

1/2 Round Gutterting

Single Course of Semi-Engineering Brick

Ex16mm x 150mm Pressure Treated Shiplap Exterior Cladding

15mm OSB Kickboarding to 1.2m high

75mm x 50mm Pressure Treated Framing Spaced at 600mm centres

Black Onduline Ridge CapsDecorative Finial

DPC (Rain Skirt)

Black Corrugated Onduline Roof Sheets

88mm x 38mm Roof Purlins In Prefabricated Steel Joist Hangers

1143mm Overhang

Chart Range Chester Range

2235

mm

to e

aves

2945

mm

to R

idge

Opening Perspex Window with Saftey Mesh

Top & Bottom Stable Door.Bottom Door 50mm thick

Botto

m D

oor 1

321m

m H

igh

Top

Doo

r 72

4mm

Hig

h

1219mm Wide

1/2 Round Guttertingto front

Guttering Down Pipe

2362

mm

to e

aves

3072

mm

to R

idge

2 Bladed Louvered Window

Top & Bottom Stable Door Bottom Door 64mm thick

1219mm Wide


Guttering Down Pipe

Metal Galvanised Chew Strips to the Top Door Surrounds

Botto

m D

oor 1

321m

m H

igh

Top

Doo

r 72

4mm

Hig

h

1219mm Overhang

2464

mm

to E

aves

3438

mm

to R

idge

3581mm Gable End





Black Onduvilla Ridge CapsDecorative FinialBlack Onduvilla

Light Weight Tiles

Roof Boarded with 18mm OSB


18mm PLY Kickboarding to 1.2m high

DPC (Rain Skirt)

2362

mm

to E

aves

3072

mm

to R

idge

3581mm Gable End







DPC (Rain Skirt)



1143mm Overhang


2464

mm

to e

aves

3438

mm

to R

idge

Botto

m D

oor 1

321m

m H

igh

Top

Doo

r 91

4mm

Hig

h

1219mm Wide




Guttering Down Pipe

Metal Galvanised Chew Strips encasing the complete door frame including the header

& leading edge of the top door


Clipper Range

2235

mm

to E

aves

2945

mm

to R

idge

3581mm Gable End







DPC (Rain Skirt)



1143mm Overhang

Chart Range Chester Range

2235

mm

to e

aves

2945

mm

to R

idge

Opening Perspex Window with Saftey Mesh

Top & Bottom Stable Door.Bottom Door 50mm thick

Botto

m D

oor 1

321m

m H

igh

Top

Doo

r 72

4mm

Hig

h

1219mm Wide


Guttering Down Pipe

2362

mm

to e

aves

3072

mm

to R

idge



1219mm Wide


Guttering Down Pipe

Metal Galvanised Chew Strips to the Top Door Surrounds

Botto

m D

oor 1

321m

m H

igh

Top

Doo

r 72

4mm

Hig

h

1219mm Overhang

2464

mm

to E

aves

3438

mm

to R

idge

3581mm Gable End





Black Onduvilla Ridge CapsDecorative FinialBlack Onduvilla

Light Weight Tiles



18mm PLY Kickboarding to 1.2m high

DPC (Rain Skirt)

2362

mm

to E

aves

3072

mm

to R

idge

3581mm Gable End







DPC (Rain Skirt)



1143mm Overhang


2464

mm

to e

aves

3438

mm

to R

idge

Botto

m D

oor 1

321m

m H

igh

Top

Doo

r 91

4mm

Hig

h

1219mm Wide




Guttering Down Pipe

Metal Galvanised Chew Strips encasing the complete door frame including the header

& leading edge of the top door


StableS

chart range

3.0m x 3.6m Stalls (10' x 12' stalls) 10.36m

(34') wide with 3.0m (10') passageway

6.0m x 10.3m (20' x 34') 4 stalls £11,275

9.1m x 10.3m (30' x 34') 6 stalls £15,845

12.1m x 10.3m (40' x 34') 8 stalls £20,450

15.2m x 10.3m (50' x 34') 10 stalls £24,995

18.2m x 10.3m (60' x 34') 12 stalls £29,675

extra 3.0m x 3.6m (10') 2 stalls £4,595

3.6m x 3.6m Stalls (12' x 12' stalls) 10.36m

(34') wide with 3.0m (10') passageway

7.3m x 10.3m (24' x 34') 4 stalls £11,545

10.9m x 10.3m (36' x 34') 6 stalls £16,525

14.6m x 10.3m (48' x 34') 8 stalls £21,545

18.3m x 10.3m (60' x 34') 10 stalls £26,495

21.9m x 10.3m (72' x 34') 12 stalls £31,475

extra 3.6m x 3.6m (12') 2 stalls £4,995


WAll clAddiNG:Selected high-quality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails.

rooF coNSTrucTioN:Purlins are 125mm x 50mm (5" x 2") spaced at 450mm (18") centres, which are held in place by joist holders on prefabricated trusses, then covered with black onduline roof sheeting. A clear roof sheet is also included above each stall. Optional roof finishes include alternative coloured Onduline roof sheets or onduvilla light weight tiles .

KicKBoArdiNG:Stalls are timber framed using 100mm x 50mm (4" x 2") and are lined up to 1219mm (4') high with 18mm oS kickboarding and the upper section is constructed using 20mm galvanised steel bars spaced at 75mm (3") centres.

TAcK rooMS ANd hAY SToreS:if you require a hay Store or Tack room these can be incorporated.

doorS:Side-Hinged Lower Stable Door: 1219mm (w) x 1320mm (h) x 70mm (d) (48" x 52" x 2 ¾") is fitted to front of all stalls. doors are faced with Shiplap and lined with 18mm (¾") oS kickboarding. Anti-chew strips are fitted to the top door surround and to the top of the door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 600mm (24") adjustable hook and band hinges, 200mm (8") pad bolt, kickbolt and a cabin hook. All Stable doors are pressure treated.Sliding American Barn External Door: 2438mm (8') wide is fitted to the front of the building. These are not pressure treated and will require staining after installation.American Barn Top Doors: can be fitted to the rear of each stall as an option extra.

WiNdoWS:A choice of windows is available as optional extras.

VeNTilATioN:Two louvred ventilation grilles are fitted to each gable end.

GuTTeriNG:Half-round, black guttering and downpipes are fitted to both sides of the building.

heiGhT:To eaves, measures 2235mm (7' 4") and to ridge 3970mm (13'), including brickwork.

TiMBer TreATMeNT:All timber is pressure treated (not including roof purlins) adding to the longevity of your buildings.

chArT rANGe iNTerNAl PArTiTioNS To supply for D.I.Y. only to go in your existing building.

3.0m x 2.2m (10' x 7' 2") dividing panel with metal grille lined with 18mm (¾") oS kickboard to 1.2m (4')

£456

3.6m x 2.2m (12' x 7' 2") dividing panel with metal grille lined with 18mm (¾") oS kickboard to 1.2m (4')

£493

3.0m x 2.2m (10' x 7' 2") dividing panel fully lined to 2.2m both sides with 18mm (¾") Ply kickboard

£313

3.6m x 2.2m (12' x 7' 2") dividing panel fully lined to 2.2m both sides with 18mm (¾") oS kickboard

£435

3.0m x 2.2m (10' x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") oS kickboard to 1.2m (4') including lower door

£376

3.6m x 2.2m (12' x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") oS kickboard to 1.2m (4') including lower door

£413

AM

er

icA

N B

Ar

NS

All prices exclude VAT. Prices include installation - Refer to page 3 for delivery charges

9

ameriCan barn SPeCifiCationS & PriCeS

10 01233 611123 [email protected] www.chartstables.co.ukPlease Note: Timber sizes quoted are sawn dimensions and are slightly smaller after

planing. We reserve the right to alter our specifications without notice.

The cliPPer rANGeWAll coNSTrucTioNWalls are built with 75mm x 50mm (3" x 2") timber framing, spaced at 600mm (2') centres.

WAll clAddiNGQuality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails.

rooF coNSTrucTioNPurlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses. Mobile Stable roofs are boarded with 11mm OS Board, finished before the centre of the roof to allow for good airflow and ventilation, then covered with black Onduline roof sheeting. Optional roof finishes include coloured Onduline. Clear roof sheets are available on request.

oPeNiNGS To MoBile Field ShelTerSMobile Field Shelter openings are 2.4m (8') wide and are not fitted with anti-chew strips, or slip rails but are available as an optional upgrade.

TiMBer MoBile SKidSTimber skids are constructed using pressure treated 150mm x 75mm (6" x 3") in conjunction with galvanized fixtures and fittings. Towing points are located at both ends and a heavy-duty chain is supplied.

GAlVANiSed MeTAl SKidSSteel skids are constructed using 80mm x 40mm (3" x 1½") galvanised steel. Towing points are located at both ends and a heavy-duty chain is supplied.

KicKBoArdSMobile Field Shelters and Mobile Stables are lined to 1219mm (4') high with 11mm oS kickboarding. it can be lined to eaves as an optional upgrade.

doorS To MoBile STABleS oNlYStable doors: are 1219mm (w) x 2085mm (h) x 50mm (d), (48” x 6' 10" x 2"). Bottom doors are lined on the inside with 18mm OS kickboarding . Top doors are ledged and braced. Anti-chew strips are fitted to the top of the lower door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges fitted to the lower door and 350mm (14") fitted to the top door, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks. Tack Room doors are ledged and braced and fitted with a 200mm (8") pad bolt and a cabin hook. All stable doors are pressure treated.


WiNdoWS (MoBile STABleS oNlY)A fully opening 460mm x 660mm (18" x 26") clear Perspex window, lined on the inside with a safety meshto each stable.

exTeNded FroNT oVerhANGFront canopy extends forward to 1219mm (4').

GuTTeriNG:Half-round, black guttering and downpipe are fitted to the front of all units. Rear guttering is available.

heiGhT:To eaves measures 2235mm (7' 4") and to ridge 2968mm (9' 8"), including skids.


mobile Stable & fielD Shelter SPeCifiCationS

Mo

Bil

e S

TAB

le

S &

Mo

Bil

e F

iel

d S

he

lTe

rS


TAlK GrilleS To MoBile STABleS oNlY:one 1162mm x 864mm (46" x 34") galvanised talk grille is fitted between stables, as standard.

exTeNded FroNT oVerhANG:Front canopy extends forward to 1219mm (4').

GuTTeriNG:half-round, black guttering and downpipe is fitted to the front of all units. rear guttering is available.

heiGhT:To eaves measures 2362mm (7’ 8") and to ridge 3095mm (10' 2"), including skids.



WAll clAddiNGSelected high-quality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails.

rooF coNSTrucTioN:Purlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses. Mobile Stable roofs are boarded with 11mm oS Board finishing before the centre of the roof to allow for good airflow and ventilation, then covered with black onduline roof sheeting. Mobile Field Shelter roofs are boarded. optional roof finishes include coloured onduline and onduvilla light weight tiles. A large clear roof sheet is fitted to each Mobile Stable as standard.

oPeNiNG To MoBile Field ShelTerS:Mobile Field Shelter openings are 2.4m (8') wide and the vertical sides are lined with anti-chew strips, 100mm x 50mm (4" x 2") slip rail and brackets.

TiMBer MoBile SKidSTimber skids are constructed using pressure treated 150mm x 75mm (6" x 3"), in conjunction with 50mm x 50mm x 4mm metal steels. Towing points are located at both ends and a heavy-duty chain is supplied.

GAlVANiSed MeTAl SKidS:Metal skids are constructed using 100mm x 100mm x 5mm (4" x 4") galvanised steel. Towing points are located at both ends and a heavy-duty chain is supplied.

KicKBoArdS:Mobile Field Shelters and Mobile Stables are lined to 1219mm (4') high with 18mm (¾") oS kickboarding and can be fully lined to eaves if required. Alternative types of kickboard are available.

doorS To MoBile STABleS oNlY:Stable Doors: are 2085mm high, 1219mm wide, 70mm thick, (6' 10" high, 4' wide, 2¾" thick). Bottom doors are lined with 18mm (¾") oS kickboarding. Top doors are ledged and braced. Anti-chew strips are fitted to the top door surround and to the top of the lower door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges to the top stable doors and 600mm (24") to the bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks are fitted to the top and bottom stable doors. Tack Room Doors: are ledged and braced and fitted with a 200mm (8") pad bolt and a cabin hook. All stable doors are pressure treated.

WiNdoWS To MoBile STABleS oNlY:A 533mm x 915mm (21" x 36") two-bladed louvred window, with a fixed clear Perspex lower section, isfitted to each Stable and is adjustable from the outside. Heavy-duty galvanised metal bars are fittedto the inside.

StatiC fielD ShelterSour Static Field Shelters are built to the same specification as our Mobile Field Shelters, except the Static Field Shelters do not come with skids but are instead bolted down to a concrete pad with a single course of brickwork.

Mobile Field Shelter Static Field Shelter


mobile Stable PriCeS


StatiC fielD Shelter PriCeSSTATic Field ShelTerS

clipper chart

Apex roof

No canopy

Shiplap

3.6m x 3.6m (12' x 12') £1,895 £2,115

5.4m x 3.6m (18' x 12') £2,295 £2,895

7.2m x 3.6m (24' x 12') £2,975 £3,495

9.14m x 3.6m (30' x 12') £3,450 £4,545

10.9m x 3.6m (36' x 12') £4,095 £4,650

clipper chart

Apex roof

1.2m (4')

canopy

Shiplap

3.6m x 3.6m (12' x 12') £1,950 £2,295

5.4m x 3.6m (18' x 12') £2,495 £3,175

7.2m x 3.6m (24' x 12') £3,145 £3,845

9.1m x 3.6m (30' x 12') £3,775 £4,995

10.9m x 3.6m (36' x 12') £4,395 £5,445

MoBile STABleSclipper chart

Timber Skids

1.2m (4') canopy

3.6m x 3.6m (12' x 12') £2,695 £2,945

7.0m x 3.6m (23' x 12') £4,125 £5,645

Metal Skids

1.2m (4') canopy

3.6m x 3.6m (12' x 12') £2,750 £3,595

7.2m x 3.6m (24' x 12') £4,475 £6,355

10.9m x 3.6m (36' x 12') £6,195 £8,725

MoBile STABle coMBiNATioN uNiTSclipper chart

Timber Skids

1.2m (4') canopy

Shiplap

3.6m x 3.6m Stable (12' x 12') with a 1.8m x 3.6m (6' x 12') Tack room £3,325 £4,395



Metal Skids

1.2m (4') canopy

Shiplap


3.6m x 3.6m with a 2.4m x 3.6m (12' x 12' x 8' x 12') Stable Tack room £4,075 £5,245

7.2m x 3.6m double Stable (24' x 12') with a 1.8m x 3.6m (6' x 12') Tack room £5,650 £7,875

7.2m x 3.6m double Stable (24' x 12') with a 2.4m x 3.6m (8' x 12') Tack room £5,895 £8,145

3.6m x 3.6m Stable (12' x 12') with a 3.6m x 3.6m (12' x 12') hay Store £3,950 £5,645

3.6m x 3.6m Stable (12' x 12') with a 7.2m x 3.6m (24' x 12') hay Store £5,545 £7,495

7.2m x 3.6m double Stable (24' x 12') with a 3.6m x 3.6m (12' x 12') hay Store £5,875 £8,245



MoBile Field ShelTer coMBiNATioN uNiTS

clipper chart

Timber Skids 1.2m (4') canopy Shiplap

3.6m x 3.6m (12' x 12') Field Shelter with a 1.8m x 3.6m (6' x 12') Tack room £3,175 £4,395


Metal Skids1.2m (4') canopy Shiplap





Mo

Bil

e S

TAB

le

S &

Mo

Bil

e F

iel

d S

he

lTe

rS


MoBile Field ShelTerSclipper chart

Timber Skids

1.2m (4') canopy

Shiplap

3.6m x 3.6m (12' x 12') £2,115 £2,495

5.4m x 3.6m (18' x 12') £2,645 £3,495

7.0m x 3.6m (23' x 12') £3,465 £4,070

Metal Skids

1.2m (4') canopy

Shiplap

3.6m x 3.6m (12' x 12') £2,445 £3,075

5.4m x 3.6m (18' x 12') £2,850 £4,125

7.2m x 3.6m (24' x 12') £3,775 £4,865

9.1m x 3.6m (30' x 12') £4,475 £6,355

10.9m x 3.6m (36' x 12') £5,125 £6,845

clipper chart

Wall construction 75mm x 50mm (3" x 2") 100mm x 50mm (4" x 2")

roof lining 11mm (7/16") oSB 11mm (7/16") oSB

Metal Skids 80mm x 40mm (3¼" x 17/8") 100mm x 100mm (4" x 4")

Timber Skids 150mm x 75mm (6" x 3") 150mm x 75mm (6" x 3")

Kickboards 12mm (1/2") oSB 18mm (¾") oSB

roof Purlins 125mm x 50mm (5" x 2") 125mm x 50mm (5" x 2")

Full detailed specifications can be found on pages 10 & 11


coMPAre The rANGeS

mobile fielD Shelter PriCeS


deliVerY AcroSS The uK & euroPeuNiTed KiNGdoM deliVerY & BuildiNG iNSTAllATioN:in almost all cases we deliver and install our buildings. Where the option for diY is preferred we have established relations with several reliable hauliers or clients can arrange their own collection. Please contact our support team for further details. You will be supplied you with Self-Assembly Guidelines drawn up for your building.

deliVerY To The chANNel iSlANdS:Our Equestrian buildings are available on a DIY basis to the Channel Islands. We offer guidance on how to arrange this, having helped many customers from the channel islands organize this over many years. Please call our support team to discuss this further.

FrANce & euroPeAN deliVerY & iNSTAllATioN:We have established experience of delivering our buildings down through France and across europe. We are ideally positioned here in Kent, within close proximity to dover docks and calais, to supply our clients across mainland europe. We work closely with two hauliers who travel from Kent across europe weekly and can deliver your buildings for self assembly. We can advise on planning applications and VAT exemption, if applicable.our aim is always to ensure the purchase of your chart Stables is as stress free as possible and that you will go on to enjoy many years of pleasure from our buildings.

diY collecTioN:From our Workshops here in Ashford, TN23 4Fh. You will be supplied with Self-Assembly Guidelines drawn up for your building.

PrePArATioN & PlANNiNG SerVicePlANNiNG ANd AdVice SerVice:We can support you with your planning application, providing you with elevated drawings to accompany your planning application. In addition, our support staff can talk you through the design of your eques-trian building and give general advice regarding groundworks that may need to be completed prior to assembly.

do i Need PlANNiNG PerMiSSioN:Whilst this will not be the answer you will want to hear, in 99% of cases the answer is yes. We would al-ways suggest that a telephone call to your local council is a good idea. They should give you some good, free advice and in most cases visit you. Listening to their suggestions in the first place may possibly save you time and money. Whilst we cannot give you the advice that a Planning consultant can, we are able to offer you a helping hand, based on our experience over the years.

hoW loNG Will PlANNiNG PerMiSSioN TAKe:Approximately 8 - 10 weeks.

cAN i rePlAce old BuildiNGS:Yes, but always make sure you are building like-for-like. Do not exceed the original ground floor area or height. We suggest that you take some photographs of the original buildings. We would advise that you always refer to your local Planning Portal as each local authority does have the right to implement their own rules.

hoW do i Go ABouT GeTTiNG PlANNiNG PerMiSSioN:Firstly, you will need to ask your local council for the necessary forms if submitting a paper submission alternatively apply on line. These are not as daunting as you may think. The council will need a scaled site plan, clearly marked with the position of your new buildings and six copies of elevated drawings. We can supply elevated drawings to you, if required we can also advise on Site Plan preparations. Finally, a cheque or BAcs transfer will need to be sent to the council along with your chosen application process.

deliVerY dAY:on the delivery day it is imperative that our team can get easy and close access to the erecting site. They will work productively and courteously and leave the site tidy.

ProjecT coMPleTioN:on completion, our senior installer will require you to ensure everything has been carried out to your satisfaction and will then require the final payment.


frequently aSkeD queStionS

diY TiMBer BuildiNGSWe offer substantial discounts for DIY buildings collected from our Workshops in Ashford.Buildings are supplied complete. All the components are cut to size, and all the necessary screws, nails and bolts are included in order to make the assembly process as straight forward as possible.Self Assembly Guidelines are included and in the unlikely event you encounter a problem, we have experienced staff available to offer advice, over the phone.The tools you will need include a hammer, hand saw, cordless screwdriver and a hammer drill.A question often asked is how long it will take to assemble. As a guide our installation teams, as an example will assemble a single 12' x 12' (3.6m x 3.6m) Stable in approximately an hour and a half. But please remember we are assembling buildings on a daily basis and it is highly unlikely that you would be able to match this time.

Health and Safety is uppermost in our minds and we would urge you to take great care. The wall panels of our buildings are very heavy, so lifting them can be an issue. Particular care must be taken when on roofs and Scaffold Towers should be used. We would further recommend the use of safety boots and protective eye wear at all times. in the event you need advice we would suggest speaking to your local health and Safety executive, useful information can be found on their website: www.hse.gov.uk

TiMBer TreATMeNTchart Stables, along with probably 98% of the country’s leading timber frame building manufacturers have been using a pressure treatment process for twenty years, to BS & eu Standards.

WhAT iS TANAliSed TiMBer:Tanalised timber has been impregnated with Tanalith e (used to pressure treat timber) , a waterborne product based on copper triazole technology. copper is derived from recycled sources and triazoles are organic biodegradable biocides, commonly used to protect many of the food crops we eat.This type of timber treatment is used extensively throughout the world and is used in the construction of timber buildings; eg within timber garages, play ground equipment, fencing, timber decking, the list is endless.Pressure treated timber ensures a long maintenance-free life against fungal decay (rot) and insect attack.

WhAT iS The diFFereNce BeTWeeN PreSSure TreATiNG, diPPed & SPrAYed TiMBer:Buildings that have been manufactured and then dipped or sprayed do not offer the same long term protection. This is a considerably cheaper option with untreated timber costing approximately 15% less than timber that has been pressure treated. This represents a substantial saving to the manufac-turer who doesn't use pressure treated timbers.Perhaps more frustratingly, if your building has not been pressure treated it will require repeated treatments, by yourself, during its life at additional cost and inconvenience to you.

WhY chooSe TANAliSed TiMBer:do you want to spend time and money every year treating your building or do you want the maintenance-free option that opting for chart’s Tanalised timber offers? Our aim here at Chart Stables is to offer you a building with minimal maintenance during its life except keeping it cobweb free!

FAQ

S


www.chartgarages.co.uk

+44 (0)1233 229898

www.chartfencing.co.uk

+44 (0)1233 626188

www.chartgardenbuildings.co.uk

+44 (0)1233 229898

Garden [email protected]

+44 (0)1233 611123

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing.

We reserve the right to make any changes at any time, without notice, in prices, colours, materials, and specifications, and also to discontinue products. E&OE. 10.2019

Chart Stables, Garages & Garden Rooms, UK & European Sales Office . Chart Fencing Office

Chart House, Dencora Way, Ashford, Kent TN23 4FH

www.chartstables.co.uk

Chart StableS Specifications & Prices · 2 01233 611123 [email protected] planing. We...

Documents

Transcript of Chart StableS Specifications & Prices · 2 01233 611123 [email protected] planing. We...