Characteristics of Composite Materials Chapter 13.
-
Upload
julianne-axford -
Category
Documents
-
view
250 -
download
4
Transcript of Characteristics of Composite Materials Chapter 13.
![Page 1: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/1.jpg)
Characteristics of Composite MaterialsChapter 13
![Page 2: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/2.jpg)
Unique Characteristics of CompositesComposite• A substance consisting of a minimum of 2 materials• At least one material serves as a solid reinforcement• The second is a binding material (matrix)
• Binding material begins as a liquid or slurry• Will saturate the binding material as it solidifies• Hold the reinforcement in a desired orientation
![Page 3: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/3.jpg)
• Mechanical properties of the composite determined by:• Position of the reinforcement material• Shape of product• Manufacturing process used
• Reinforcement materials carry the load• Matrix material distributes the load and protects the
reinforcement material
![Page 4: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/4.jpg)
• Composites can be used in a wide variety of service and performance conditions
• Depends on:• Selection of reinforcement materials • Proper placement of reinforcement materials• Selection of suitable matrix material
![Page 5: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/5.jpg)
Structure of Composite Materials• Fiber reinforced plastic (FRP)• Most widely recognized• Consists of glass fibers and polymer resin• Glass fiber very susceptible to damage• Polymer resin has low tensile strength• Resin is tough, and protects glass fibers
• FRP composites made up of layers• Called “lay-up” or “buildup”
![Page 6: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/6.jpg)
• FRP used in open molding (layup procedure)• A common low cost manufacturing process
• Layer of polymer resin is sprayed in a mold• Layer of glass fiber is added• Fiber is “wetted” with more resin• Another layer of glass is added• Process is repeated until desired buildup is achieved
![Page 7: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/7.jpg)
• FRP is competitive with woods, metals and plastics• Material costs more• Lower cost comes from less expensive manufacturing
processes for composites
![Page 8: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/8.jpg)
Reinforcements• Variety of reinforcement materials• Three categories:• Fillers• Fibers• Solids
![Page 9: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/9.jpg)
Fillers• Added to resins to change their flow characteristics and
increase the volume• Dust like particles and short fibers
• Easy to handle – paste like• Modest mechanical properties• Typically used to fill in gaps and voids and improve surface
finish• Reduce cost• Referred to as an extender
![Page 10: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/10.jpg)
Classes of FillersMineral fillers Organic fillers Specialty fillers
Calcium carbonate Wood flour Microspheres
Calcium sulfate Calcium carbonate Solid glass spheres
Talc Walnut shells (ground) Hollow glass spheres
Mica Corncobs (ground) Ceramic spheres
Thermoplastic spheres
Phenolic spheres
![Page 11: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/11.jpg)
Fibers• Mainstay of reinforcement• Economical • Good mechanical properties• Dependent on type of glass fiber and orientation
• Ingredients:• Silica sand (primary)• Metal oxides (added)
• Size of fibers – 3.5 to 24 microns
![Page 12: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/12.jpg)
E-glass• Most economical glass fiber• Sufficient strength• Low cost
• At least 50% silica oxide• Also can have aluminum, boron, calcium, limestone, and others
• Accounts for nearly 90% of the glass reinforcements• “E” refers to it’s outstanding electrical insulating
characteristics
![Page 13: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/13.jpg)
Chemical Resistant Glass• Glass fiber has good chemical resistance• Over exposure to hot water will cause erosion to exposed
glass fibers• Corrosion resistant resin is added to slow the erosion• Result it a composite with good chemical resistance
• Selection of appropriate fibers based on chemical exposure is also important
![Page 14: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/14.jpg)
Specialty Fibers• Higher tensile strength and stiffness than glass fibers• Made from:• Carbon• Boron• Aramid
• Much higher cost• Exceptional performance for customer willing to pay
• Hybrid – specialty fibers mixed with glass fibers• Helps control cost
![Page 15: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/15.jpg)
Reinforcement Enhancements• Single strands of reinforcement are hard to handle and keep in
place when adding a binding matrix• Can result in a product with variable mechanical properties• Time consuming to manufacture
• To solve this problem glass fiber must go through further processing• Glass fiber gathered into bundles or strands
• Strand – collection of more than one continuous filament• Roving – bundle of untwisted glass strands packaged like thread on a
large spool
![Page 16: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/16.jpg)
• Fabrics are popular reinforcement• Mat – nonwoven fabric made from fibers held together by a
chemical binder• Chopped mat – randomly distributed fibers cut to length
• Lower cost• Continuous-strand mat – swirls of unbroken fiber strands
• Stronger• Plain weave – simple fabric, over under weave
![Page 17: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/17.jpg)
Protecting the glass fiber during processing• Glass fibers can be damaged by abrasion while being handled• Can cause breakage• Sizing – chemical mixture to coat and protect glass fibers
![Page 18: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/18.jpg)
Solid Reinforcement• Creates stiff and lightweight composites• Also called laminate• Core material - the solid reinforcement material
• Sandwich construction• Face skin laminate (fiber reinforcement)• Core material• Reinforced back skin laminate
• Results in thicker, stiffer laminates
![Page 19: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/19.jpg)
• Weight is always a concern• Core materials must be light and economical• Must be able to be bonded by the resin being used• Polystyrene foam – dissolved by resin
![Page 20: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/20.jpg)
Balsa wood• Marine hulls and decks• Lightweight and rigid• 6 to 16 lbs per cubic foot• Laminate bonds to the end grain of the wood• Improved crush strength
Polyvinyl chloride (PVC) foam• Combination of strength and low weight• 4 to 30 lbs per cubic foot
Linear PVC foam• Mainly for marine industry• Allows deflection before failure
![Page 21: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/21.jpg)
Polyurethane foam• In sheet stock or liquid that is foamed into place• Used in cavity of boat hulls• Add stiffness• Buoyancy• Low shear strength• Not structural applications• Also good thermal insulator (wall panels of refrigeration units)• 2 to 20 lbs per cubic foot
![Page 22: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/22.jpg)
Honeycomb cores• Aerospace and transportation• Made from: paper, aluminum, glass reinforced phenolic• 1 to 6 lbs per cubic foot• Very stiff• Lightweight• High crush strength
![Page 23: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/23.jpg)
Creating the matrix in the composite• Matrix generally a resin• Function to transfer the load to and protect the reinforcement
fiber• Most popular matrix materials are plastics• Thermoplastic (re-formable)• Thermosets (not re-formable) (primarily used)
![Page 24: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/24.jpg)
Gel Coat• Resin formulated to provide a quality finish to the outer
surface of a composite• Improves durability• Provides color, gloss and environmental protection• Not paint
![Page 25: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/25.jpg)
Resin Additives• Improve the chemical and physical properties of the matrix
resin• Many available additives:• Fire retardants/suppressants• UV inhibitors• Conductive additives
![Page 26: Characteristics of Composite Materials Chapter 13.](https://reader035.fdocuments.in/reader035/viewer/2022081417/55181394550346a2318b4572/html5/thumbnails/26.jpg)
Composite Stock• Prepregs – sheets of fiber saturated with resin• Manufacturer molds prepregs into shapes
• Composite stocks usually made on site• Purchase resins, reinforcement and additives separately• Mix themselves