CHARACTERISTICS - ATM TRANSMISSIONS...• Loading capacity in accordance with: ISO.14521, DIN.3996,...

CHARACTERISTICS • NMRV – Sizes: 025-030-040-050-130-150 • NMRVpower – Sizes: 063-075-090-110 • Available versions: fitted for motor coupling, with input shaft, with torque limiter • Power up to 18,5 kW • Cases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast iron • Ratios between 5 and 100 • Max torque 1.550 Nm and admissible radial loads max 18.000 N • Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity • Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10) • Ground worm profile ZI (UNI4760) • Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281 • Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843 • Available with pre-stage unit: HA31 for NMRV040/NMRV050, HW 030/040 for NMRV-P Series • Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, NRV+NMRV, NRVpower+NMRV, HA31+NMRV, HW/NMRVpower, IHW/NMRVpower • Options: protection cover, torque arm, output flange, output shaft kit, torque limiter, viton oil seals, low/high temperature and food grade oil, filling/drain/breather/level plug, reinforced output

Upload
others
Category

Documents
view
13
download
0

Embed Size (px):

Transcript of CHARACTERISTICS - ATM TRANSMISSIONS...• Loading capacity in accordance with: ISO.14521, DIN.3996,...

CHARACTERISTICS

• NMRV – Sizes: 025-030-040-050-130-150

• NMRVpower – Sizes: 063-075-090-110

• Available versions: fitted for motor coupling, with input shaft, with torque limiter

• Power up to 18,5 kW

• Cases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast iron

• Ratios between 5 and 100

• Max torque 1.550 Nm and admissible radial loads max 18.000 N

• Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity

• Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)

• Ground worm profile ZI (UNI4760)

• Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281

• Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843

• Available with pre-stage unit: HA31 for NMRV040/NMRV050, HW 030/040 for NMRV-P Series

• Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, NRV+NMRV, NRVpower+NMRV, HA31+NMRV, HW/NMRVpower, IHW/NMRVpower

• Options: protection cover, torque arm, output flange, output shaft kit, torque limiter, viton oil seals, low/high temperature and food grade oil, filling/drain/breather/level plug, reinforced output

Page 2: CHARACTERISTICS - ATM TRANSMISSIONS...• Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281 • Size 030 and over are

RANGE

DIN 611 - New Fastener LLC-4, ISO 5753 DIN 620- 6, ISO 582 DIN 623- 1 DIN 4000-12 DIN 5418 DIN 5425-1 DIN 17 230, ISO 683-17 ISO 76 ISO 281 ISO 1132 ISO 5593 ISO 6811 Continued on

urban GREAT · 2019. 7. 15. · normas ISO 10545.2 ISO 10545.4 ISO 10545.6 ISO 10545.8 ISO 10545.9 ISO 10545.12 ISO 10545.13 ISO 10545.14 DIN 51094 DIN 51130 DIN 51097 no sample must

research.irantvto.irresearch.irantvto.ir/welding/EN ISO 9013.pdf · DIN ISO 1302 DIN 4762 DIN ISO 8015 Amendments DIN 2310-1 and DIN 2310-3, November 1987 editions, have been superseded

...2020/12/03 · DIN EN ISO 11138-5 : 2017-07 DIN EN ISO 11737-1 : 2018-11 DIN EN ISO 11737-2 : 2020-07 DIN EN/ISO 14161:20100 DIN EN 14180:2014-09 DIN EN ISO 14644-1 : 2016-06 Sterilisation

Zertifizierungsstelle für€¦ · DIN EN ISO 9001:2015 Qualitätsmanagementsysteme DIN EN ISO 14001:2015 Umweltmanagementsysteme DIN EN ISO 50001:2011 Energiemanagementsysteme SCC-Regelwerk

$...DIN 53160-1 2010, STANDARD 100 by OEKO-TEX@ DIN EN ISO 1993-03, DIN EN ISO 105-N02- 1995-05 DIN EM ISO 105 X05- 1997-05 DIN EN ISO 105- Xlo:1995-12 DIN Colour fastness to rubbing$