Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are...

18
HMI Components Edition 08/2015 Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following pages show a representative selection of LEDs. Series 10

Transcript of Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are...

Page 1: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

HMI ComponentsEdition 08/2015

CharacteristicsThe Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories).The following pages show a representative selection of LEDs.

Series 10

Page 2: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following
Page 3: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

3

Content

Overview

Illumination

LED T1 3/4 MG 4

Single-LED T5.5 6

Single-LED T6.8 8

LED BA9s 10

LED BA9s Fail Safe 12

Accessories 14

Technical data 16

Application guidelines 17

Index 18

10

Page 4: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

4

Illumination

16 max.

Ø6.

1 m

ax.

LED T1 3/4 MG

Product can differ from the current configuration. Dimensions [mm]

Additional Information

• A suitable lamp remover Part No. 61-9740.0 (Series Swisstac Part No. 300-0002-00)

• When using AC/DC types with AC operation, slight flickering can occure

• Luminous intensity data of the LEDs on direct voltage

• Electrical and optical data are measured at 25 °C

• If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up

• The specified versions are built with a protection diode (halve wave rectifier) in series and the LED

• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LEDSingle-LED red 6 VDC +10 % 15 mA ±15 % 350 mcd 630 nm 10-2J06.3142 0.002 kg

12 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2J09.1062 0.002 kg

24 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2J12.1062 0.002 kg

28 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2J13.1062 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 200 mcd 630 nm 10-2J19.1042 0.002 kg

Single-LED yellow 6 VDC +10 % 15 mA ±15 % 300 mcd 587 nm 10-2J06.3144 0.002 kg

12 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2J09.1064 0.002 kg

24 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2J12.1064 0.002 kg

28 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2J13.1064 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 180 mcd 587 nm 10-2J19.1044 0.002 kg

Single-LED green 6 VDC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2J06.3145 0.002 kg

12 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2J09.1065 0.002 kg

24 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2J12.1065 0.002 kg

28 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2J13.1065 0.002 kg

48 VAC/DC +10 % 2/4 mA ±15 % 600 mcd 525 nm 10-2J19.1045 0.002 kg

10

Page 5: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

5

Illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LED blue 6 VDC +10 % 15 mA ±15 % 680 mcd 470 nm 10-2J06.3146 0.002 kg

12 VAC/DC +10 % 7/14 mA ±15 % 650 mcd 470 nm 10-2J09.1066 0.002 kg

24 VAC/DC +10 % 7/14 mA ±15 % 650 mcd 470 nm 10-2J12.1066 0.002 kg

28 VAC/DC +10 % 7/14 mA ±15 % 650 mcd 470 nm 10-2J13.1066 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 400 mcd 470 nm 10-2J19.1046 0.002 kg

Single-LED white 6 VDC +10 % 15 mA ±15 % 750 mcd x0.31/y0.32 nm 10-2J06.3149 0.002 kg

12 VAC/DC +10 % 7/14 mA ±15 % 700 mcd x0.31/y0.32 nm 10-2J09.1069 0.002 kg

24 VAC/DC +10 % 7/14 mA ±15 % 700 mcd x0.31/y0.32 nm 10-2J12.1069 0.002 kg

28 VAC/DC +10 % 7/14 mA ±15 % 700 mcd x0.31/y0.32 nm 10-2J13.1069 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 400 mcd x0.31/y0.32 nm 10-2J19.1049 0.002 kg

Bi-colour LEDBi-colour LED red/green 24 VDC +10 % 15/14 mA ±15 % 600/630 mcd 625/525 nm 10-A312.314A 0.002 kg

10

Page 6: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

6

Illumination

30 max.

+

Ø6

max

.

Single-LED T5.5

Product can differ from the current configuration. Dimensions [mm]

Additional Information

• A suitable LED remover Part No. 02-906 (Series Swisstac Part No. 300-0002-00)

• When fitting the LED elements pay attention to the polarity. An instruction can be found in the chapter «Application guidelines» of the correspon-ding series

• When using AC/DC types with AC operation, slight flickering can occure

• Electrical and optical data are measured at 25 °C

• Luminous intensity data of the LEDs on direct voltage

• The specified versions are built with a protection diode (halve wave rectifier) in series and the LED

• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LEDSingle-LED red 6 VDC +10 % 15 mA ±15 % 350 mcd 630 nm 10-2106.3142 0.001 kg

12 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2109.1062 0.001 kg

24 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2112.1062 0.001 kg

28 VAC/DC +10 % 7/14 mA ±15 % 330 mcd 630 nm 10-2113.1062 0.001 kg

48 VAC/DC +10 % 4/8 mA ±15 % 200 mcd 630 nm 10-2119.1042 0.001 kg

Single-LED yellow 6 VDC +10 % 15 mA ±15 % 300 mcd 587 nm 10-2106.3144 0.001 kg

12 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2109.1064 0.001 kg

24 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2112.1064 0.001 kg

28 VAC/DC +10 % 7/14 mA ±15 % 280 mcd 587 nm 10-2113.1064 0.001 kg

48 VAC/DC +10 % 4/8 mA ±15 % 180 mcd 587 nm 10-2119.1044 0.001 kg

Single-LED green 6 VDC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2106.3145 0.001 kg

12 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2109.1065 0.001 kg

24 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2112.1065 0.001 kg

28 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2113.1065 0.001 kg

48 VAC/DC +10 % 2/4 mA ±15 % 600 mcd 525 nm 10-2119.1045 0.001 kg

10

Page 7: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

7

Illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LED blue 6 VDC +10 % 15 mA ±15 % 680 mcd 470 nm 10-2106.3146 0.001 kg

12 VAC/DC +10 % 7/14 mA ±15 % 650 mcd 470 nm 10-2109.1066 0.001 kg

24 VAC/DC +10 % 7/14 mA ±15 % 650 mcd 470 nm 10-2112.1066 0.001 kg

28 VAC/DC +10 % 7/14 mA ±15 % 650 mcd 470 nm 10-2113.1066 0.001 kg

48 VAC/DC +10 % 4/8 mA ±15 % 400 mcd 470 nm 10-2119.1046 0.001 kg

Single-LED white 6 VDC +10 % 15 mA ±15 % 750 mcd x0.31/y0.32 nm 10-2106.3149 0.001 kg

12 VAC/DC +10 % 7/14 mA ±15 % 700 mcd x0.31/y0.32 nm 10-2109.1069 0.001 kg

24 VAC/DC +10 % 7/14 mA ±15 % 700 mcd x0.31/y0.32 nm 10-2112.1069 0.001 kg

28 VAC/DC +10 % 7/14 mA ±15 % 700 mcd x0.31/y0.32 nm 10-2113.1069 0.001 kg

48 VAC/DC +10 % 4/8 mA ±15 % 400 mcd x0.31/y0.32 nm 10-2119.1049 0.001 kg

10

Page 8: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

8

Illumination

45 max.

Ø7.

1 m

ax.

+

Single-LED T6.8

Product can differ from the current configuration. Dimensions [mm]

Additional Information

• A suitable LED remover Part No. 03-996

• When fitting the LED elements pay attention to the polarity. An instruction can be found in the chapter «Application guidelines» of the correspon-ding series

• When using AC/DC types with AC operation, slight flickering can occure

• Luminous intensity data of the LEDs on direct voltage

• Electrical and optical data are measured at 25 °C

• The specified versions are built with a protection diode (halve wave rectifier) in series and the LED

• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LEDSingle-LED red 6 VDC +10 % 17 mA ±15 % 400 mcd 630 nm 10-2K06.3152 0.002 kg

12 VAC/DC +10 % 9/17 mA ±15 % 400 mcd 630 nm 10-2K09.1072 0.002 kg

24 VAC/DC +10 % 9/17 mA ±15 % 400 mcd 630 nm 10-2K12.1072 0.002 kg

28 VAC/DC +10 % 9/17 mA ±15 % 400 mcd 630 nm 10-2K13.1072 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 200 mcd 630 nm 10-2K19.1052 0.002 kg

Single-LED yellow 6 VDC +10 % 17 mA ±15 % 340 mcd 340 nm 10-2K06.3154 0.002 kg

12 VAC/DC +10 % 9/17 mA ±15 % 340 mcd 340 nm 10-2K09.1074 0.002 kg

24 VAC/DC +10 % 9/17 mA ±15 % 340 mcd 340 nm 10-2K12.1074 0.002 kg

28 VAC/DC +10 % 9/17 mA ±15 % 340 mcd 340 nm 10-2K13.1074 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 180 mcd 340 nm 10-2K19.1054 0.002 kg

Single-LED green 6 VDC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2K06.3155 0.002 kg

12 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2K09.1075 0.002 kg

24 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2K12.1075 0.002 kg

28 VAC/DC +10 % 4/7 mA ±15 % 1050 mcd 525 nm 10-2K13.1075 0.002 kg

48 VAC/DC +10 % 2/4 mA ±15 % 600 mcd 525 nm 10-2K19.1055 0.002 kg

10

Page 9: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

9

Illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LED blue 6 VDC +10 % 17 mA ±15 % 780 mcd 470 nm 10-2K06.3156 0.002 kg

12 VAC/DC +10 % 9/17 mA ±15 % 780 mcd 470 nm 10-2K09.1076 0.002 kg

24 VAC/DC +10 % 9/17 mA ±15 % 780 mcd 470 nm 10-2K12.1076 0.002 kg

28 VAC/DC +10 % 9/17 mA ±15 % 780 mcd 470 nm 10-2K13.1076 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 400 mcd 470 nm 10-2K19.1056 0.002 kg

Single-LED white 6 VDC +10 % 17 mA ±15 % 850 mcd x0.31/y0.32 nm 10-2K06.3159 0.002 kg

12 VAC/DC +10 % 9/17 mA ±15 % 850 mcd x0.31/y0.32 nm 10-2K09.1079 0.002 kg

24 VAC/DC +10 % 9/17 mA ±15 % 850 mcd x0.31/y0.32 nm 10-2K12.1079 0.002 kg

28 VAC/DC +10 % 9/17 mA ±15 % 850 mcd x0.31/y0.32 nm 10-2K13.1079 0.002 kg

48 VAC/DC +10 % 4/8 mA ±15 % 400 mcd x0.31/y0.32 nm 10-2K19.1059 0.002 kg

10

Page 10: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

10

Illumination

Ø10

max

.

25 max. (standard)

29 max. (super bright)

LED BA9s

Product can differ from the current configuration. Dimensions [mm]

Additional Information

• A suitable LED remover Part No. 700.006.0 (Se-ries 44 Part No. 44-935)

• Luminous intensity data of the LEDs on direct voltage

• Electrical and optical data are measured at 25 °C

• The specified 6 VDC, 24 VDC Bi-colour; 130 VAC, 130 DC und 230 VAC versions are built with a protection diode

• The specified 12, 24, 28, 48 VAC/DC versions are built with a bridge rectifier

• If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up

• The specified 130 VAC types are developed to run on a supply voltage of 130 VAC only. An ope-ration at a higher supply voltage using commer-cial lampholders with integrated resistors, is not approved

• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LEDSingle-LED red 6 VDC +10 % 17 mA ±15 % 400 mcd 630 nm 10-2506.1082 0.002 kg

12 VAC/DC +10 % 16 mA ±15 % 390 mcd 630 nm 10-2509.1142 0.002 kg

24 VAC/DC +10 % 15 mA ±15 % 350 mcd 630 nm 10-2512.1142 0.002 kg

28 VAC/DC +10 % 13 mA ±15 % 300 mcd 630 nm 10-2513.1142 0.002 kg

48 VAC/DC +10 % 8 mA ±15 % 200 mcd 630 nm 10-2519.1052 0.002 kg

130 VDC +10 % 3 mA ±15 % 120 mcd 630 nm 10-2524.3042 0.002 kg

130 VAC +10 % 5 mA ±15 % 180 mcd 630 nm 10-2H24.2052 0.002 kg

230 VAC +10 % 3 mA ±15 % 120 mcd 630 nm 10-2H25.2042 0.002 kg

Single-LED yellow 6 VDC +10 % 17 mA ±15 % 340 mcd 587 nm 10-2506.1084 0.002 kg

12 VAC/DC +10 % 16 mA ±15 % 340 mcd 587 nm 10-2509.1144 0.002 kg

24 VAC/DC +10 % 15 mA ±15 % 300 mcd 587 nm 10-2512.1144 0.002 kg

28 VAC/DC +10 % 13 mA ±15 % 270 mcd 587 nm 10-2513.1144 0.002 kg

48 VAC/DC +10 % 8 mA ±15 % 180 mcd 587 nm 10-2519.1054 0.002 kg

130 VDC +10 % 3 mA ±15 % 110 mcd 587 nm 10-2524.3044 0.002 kg

10

Page 11: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

11

Illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight

Single-LED yellow 130 VAC +10 % 5 mA ±15 % 160 mcd 587 nm 10-2H24.2054 0.002 kg

230 VAC +10 % 3 mA ±15 % 110 mcd 587 nm 10-2H25.2044 0.002 kg

Single-LED green 6 VDC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2506.1085 0.002 kg

12 VAC/DC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2509.1145 0.002 kg

24 VAC/DC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2512.1145 0.002 kg

28 VAC/DC +10 % 7 mA ±15 % 1050 mcd 525 nm 10-2513.1145 0.002 kg

48 VAC/DC +10 % 4 mA ±15 % 600 mcd 525 nm 10-2519.1055 0.002 kg

130 VDC +10 % 2 mA ±15 % 300 mcd 525 nm 10-2524.3045 0.002 kg

130 VAC +10 % 3 mA ±15 % 450 mcd 525 nm 10-2H24.2055 0.002 kg

230 VAC +10 % 2 mA ±15 % 300 mcd 525 nm 10-2H25.2045 0.002 kg

Single-LED blue 6 VDC +10 % 17 mA ±15 % 780 mcd 470 nm 10-2506.1086 0.002 kg

12 VAC/DC +10 % 16 mA ±15 % 720 mcd 470 nm 10-2509.1146 0.002 kg

24 VAC/DC +10 % 15 mA ±15 % 680 mcd 470 nm 10-2512.1146 0.002 kg

28 VAC/DC +10 % 13 mA ±15 % 590 mcd 470 nm 10-2513.1146 0.002 kg

48 VAC/DC +10 % 8 mA ±15 % 400 mcd 470 nm 10-2519.1056 0.002 kg

130 VDC +10 % 3 mA ±15 % 200 mcd 470 nm 10-2524.3046 0.002 kg

130 VAC +10 % 5 mA ±15 % 230 mcd 470 nm 10-2H24.2056 0.002 kg

230 VAC +10 % 3 mA ±15 % 200 mcd 470 nm 10-2H25.2046 0.002 kg

Single-LED white 6 VDC +10 % 17 mA ±15 % 850 mcd x0.31/y0.32 nm 10-2506.1089 0.002 kg

12 VAC/DC +10 % 16 mA ±15 % 800 mcd x0.31/y0.32 nm 10-2509.1149 0.002 kg

24 VAC/DC +10 % 7 mA ±15 % 1050 mcd x0.31/y0.32 nm 10-2512.1149 0.002 kg

28 VAC/DC +10 % 13 mA ±15 % 650 mcd x0.31/y0.32 nm 10-2513.1149 0.002 kg

48 VAC/DC +10 % 8 mA ±15 % 400 mcd x0.31/y0.32 nm 10-2519.1059 0.002 kg

130 VDC +10 % 1.5 mA ±15 % 225 mcd x0.31/y0.32 nm 10-2524.3049 0.002 kg

130 VAC +10 % 5 mA ±15 % 250 mcd x0.31/y0.32 nm 10-2H24.2059 0.002 kg

230 VAC +10 % 3 mA ±15 % 150 mcd x0.31/y0.32 nm 10-2H25.2049 0.002 kg

Single-LED super brightSingle-LED red 28 VAC/DC +10 % 14 mA ±15 % 7700 mcd 630 nm 10-2413.1132R 0.002 kg

Single-LED green 28 VAC/DC +10 % 13 mA ±15 % 12400 mcd 525 nm 10-2413.1125R 0.002 kg

Single-LED yellow 28 VAC/DC +10 % 14 mA ±15 % 4200 mcd 589 nm 10-2413.1134R 0.002 kg

Single-LED with integrated Zener diodeSingle-LED red 24–30 VAC/DC +10 % 13–19 mA ±15 % 300–440 mcd 630 nm 10-2H13.3162Q 0.002 kg

Single-LED green 24–30 VAC/DC +10 % 12–18 mA ±15 % 1800–2700 mcd 525 nm 10-2H13.3165Q 0.002 kg

Single-LED yellow 24–30 VAC/DC +10 % 13–19 mA ±15 % 270–380 mcd 587 nm 10-2H13.3164Q 0.002 kg

Single-LED blue 24–30 VAC/DC +10 % 12–18 mA ±15 % 560–800 mcd 470 nm 10-2H13.3166Q 0.002 kg

Single-LED white diffuse 24–30 VAC/DC +10 % 7–11 mA ±15 % 600–900 mcd x0.31/y0.32 10-2H13.3169Q 0.002 kg

Bi-colour LEDBi-colour LED red/green 24 VDC +10 % 15 mA ±15 % 1200/900 mcd 625/525 nm 10-2H12.314A 0.002 kg

Bi-colour LED red/yellow 24 VDC +10 % 15 mA ±15 % 1200/550 mcd 625/589 nm 10-2H12.314B 0.002 kg

Bi-colour LED yellow/green 24 VDC +10 % 15 mA ±15 % 900/550 mcd 525/589 nm 10-2H12.314C 0.002 kg

10

Page 12: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

12

Illumination

Ø10

max

.

25 max.

LED BA9s Fail Safe

Product can differ from the current configuration. Dimensions [mm]

Additional Information

• A suitable LED remover Part No. 700.006.0 (Se-ries 44 Part No. 44-935)

• Luminous intensity data of the LEDs on direct voltage

• Electrical and optical data are measured at 25 °C

• The specified 72 and 110 VAC/VDC versions are built with a protection diode

• Specified 72 and 110 VAC/VDC versions are built with a bridge rectifier

• In case one LED fails, the other pair of still functio-ning LED›s is working. The light output then is half in order to indicate the malfunction and shows this way the need for replacement

• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination

LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Wir

ing

d

iag

ram

Weight

Multi-LED Fail SafeMulti-LED rot 72 VDC +10 % 2.2 mA ±15 % 4 x 190 mcd 625 nm 10-4H21.1032P 1 0.002 kg

110 VDC +10 % 2 mA ±15 % 4 x 170 mcd 625 nm 10-4H22.1032P 1 0.002 kg

Multi-LED yellow 72 VDC +10 % 2.2 mA ±15 % 4 x 190 mcd 589 nm 10-4H21.1034P 1 0.002 kg

110 VDC +10 % 2 mA ±15 % 4 x 170 mcd 589 nm 10-4H22.1034P 1 0.002 kg

Multi-LED green 72 VDC +10 % 2.2 mA ±15 % 4 x 120 mcd 525 nm 10-4H21.1035P 1 0.002 kg

110 VDC +10 % 2 mA ±15 % 4 x 170 mcd 525 nm 10-4H22.1035P 1 0.002 kg

Multi-LED blue 72 VDC +10 % 2.2 mA ±15 % 4 x 30 mcd 465 nm 10-4H21.1036P 1 0.002 kg

110 VDC +10 % 2 mA ±15 % 4 x 25 mcd 465 nm 10-4H22.1036P 1 0.002 kg

Multi-LED white 72 VDC +10 % 2.2 mA ±15 % 4 x 160 mcd 10-4H21.1039P 1 0.002 kg

110 VDC +10 % 2 mA ±15 % 4 x 145 mcd 10-4H22.1039P 1 0.002 kg

10

Page 13: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

13

Illumination

Bridge rectifier

Wiring diagram 1

10

Page 14: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

14

Accessories

Illumination

LED remover for T1 3/4 MG

Additional Information

pCaution: A switching process might be released when replacing the lamp

Product attribute Part No. Weight

LED removerfür series 22, 31, 41, 51, 61, 71 61-9740.0 0.003 kg

for series Swisstac 300-0002-00 0.003 kg

LED remover for T5.5

Additional Information

pCaution: A switching process might be released when replacing the lamp

Product attribute Part No. Weight

LED removerfor series 01, 14 02-906 0.002 kg

LED remover for T6.8

Additional Information

pCaution: A switching process might be released when replacing the lamp

Product attribute Part No. Weight

LED removerfor series 02, 03 03-996 0.027 kg

10

Page 15: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

15

AccessoriesLED remover for BA9s

Additional Information

pCaution: A switching process might be released when replacing the lamp

Product attribute Part No. Weight

LED removerfor series 04 700.006.0 0.003 kg

LED removerfor series 44 44-935 0.037 kg

10

Page 16: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

16

Technical data

Technical Data

Electrical characteristics

Operating voltage tolerance+10 %

Mechanical characteristics

StandardsLamp baseBase StandardT1 3/4 MG  DIN EN 60061-1: S5,7sT5.5   DIN 49601T6.8   DIN 49601BA9s   DIN EN 60061-1: BA9s

Environmental conditions

Storage temperature-25 °C … +80 °C

Service temperature-20 °C … +60 °C

EAO reserves the right to alter specifications without further notice.

10

Page 17: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

17

Application guidelines

LED used in

Base

Series T 1 3/4 T 5.5 T 6.8 BA9s

01 ■

02 ■

03 ■

04 ■

14 ■

22 ■

31 ■

44 ■

51 ■

55 – Swisstac ■ ■

61 ■

71 ■

10

Page 18: Characteristics · 2019-10-12 · Edition 08/2015 HMI Components Characteristics The Series 10 are LEDs for use with all EAO’s illuminated switches (as accessories). The following

18

Index

02-906 ..................... 1403-996 ..................... 1410-2106.3142 ............ 610-2106.3144 ............ 610-2106.3145 ............ 610-2106.3146 ............ 710-2106.3149 ............ 710-2109.1062 ............ 610-2109.1064 ............ 610-2109.1065 ............ 610-2109.1066 ............ 710-2109.1069 ............ 710-2112.1062 ............ 610-2112.1064 ............ 610-2112.1065 ............ 610-2112.1066 ............ 710-2112.1069 ............ 710-2113.1062 ............ 610-2113.1064 ............ 610-2113.1065 ............ 610-2113.1066 ............ 710-2113.1069 ............ 710-2119.1042 ............ 610-2119.1044 ............ 610-2119.1045 ............ 610-2119.1046 ............ 710-2119.1049 ............ 710-2413.1125R ........ 1110-2413.1132R ........ 1110-2413.1134R ........ 1110-2506.1082 .......... 1010-2506.1084 .......... 1010-2506.1085 .......... 1110-2506.1086 .......... 1110-2506.1089 .......... 1110-2509.1142 .......... 1010-2509.1144 .......... 1010-2509.1145 .......... 1110-2509.1146 .......... 1110-2509.1149 .......... 1110-2512.1142 .......... 1010-2512.1144 .......... 1010-2512.1145 .......... 1110-2512.1146 .......... 1110-2512.1149 .......... 1110-2513.1142 .......... 1010-2513.1144 .......... 1010-2513.1145 .......... 1110-2513.1146 .......... 1110-2513.1149 .......... 1110-2519.1052 .......... 1010-2519.1054 .......... 1010-2519.1055 .......... 1110-2519.1056 .......... 1110-2519.1059 .......... 1110-2524.3042 .......... 1010-2524.3044 .......... 1010-2524.3045 .......... 1110-2524.3046 .......... 1110-2524.3049 .......... 1110-2H12.314A ......... 1110-2H12.314B ......... 1110-2H12.314C ......... 1110-2H13.3162Q ....... 1110-2H13.3164Q ....... 1110-2H13.3165Q ....... 1110-2H13.3166Q ....... 1110-2H13.3169Q ....... 1110-2H24.2052 .......... 1010-2H24.2054 .......... 1110-2H24.2055 .......... 1110-2H24.2056 .......... 1110-2H24.2059 .......... 1110-2H25.2042 .......... 1010-2H25.2044 .......... 1110-2H25.2045 .......... 1110-2H25.2046 .......... 11

10-2H25.2049 .......... 1110-2J06.3142 ............ 410-2J06.3144 ............ 410-2J06.3145 ............ 410-2J06.3146 ............ 510-2J06.3149 ............ 510-2J09.1062 ............ 410-2J09.1064 ............ 410-2J09.1065 ............ 410-2J09.1066 ............ 510-2J09.1069 ............ 510-2J12.1062 ............ 410-2J12.1064 ............ 410-2J12.1065 ............ 410-2J12.1066 ............ 510-2J12.1069 ............ 510-2J13.1062 ............ 410-2J13.1064 ............ 410-2J13.1065 ............ 410-2J13.1066 ............ 510-2J13.1069 ............ 510-2J19.1042 ............ 410-2J19.1044 ............ 410-2J19.1045 ............ 410-2J19.1046 ............ 510-2J19.1049 ............ 510-2K06.3152 ............ 810-2K06.3154 ............ 810-2K06.3155 ............ 810-2K06.3156 ............ 910-2K06.3159 ............ 910-2K09.1072 ............ 810-2K09.1074 ............ 810-2K09.1075 ............ 810-2K09.1076 ............ 910-2K09.1079 ............ 910-2K12.1072 ............ 810-2K12.1074 ............ 810-2K12.1075 ............ 810-2K12.1076 ............ 910-2K12.1079 ............ 910-2K13.1072 ............ 810-2K13.1074 ............ 810-2K13.1075 ............ 810-2K13.1076 ............ 910-2K13.1079 ............ 910-2K19.1052 ............ 810-2K19.1054 ............ 810-2K19.1055 ............ 810-2K19.1056 ............ 910-2K19.1059 ............ 910-4H21.1032P ....... 1210-4H21.1034P ....... 1210-4H21.1035P ....... 1210-4H21.1036P ....... 1210-4H21.1039P ....... 1210-4H22.1032P ....... 1210-4H22.1034P ....... 1210-4H22.1035P ....... 1210-4H22.1036P ....... 1210-4H22.1039P ....... 1210-A312.314A ............ 5300-0002-00 ............ 1444-935 ..................... 1561-9740.0 ................ 14700.006.0................. 15

Part No. Page Part No. Page

10Index from Part No.