Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are...
Transcript of Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are...
![Page 1: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/1.jpg)
Chapter 8: Single-Area OSPF
Routing & Switching
![Page 2: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/2.jpg)
2
Evolution of OSPF
Interior Gateway Protocols
19881989
updated in 2008
![Page 3: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/3.jpg)
3
Features of OSPF
![Page 4: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/4.jpg)
4
Components of OSPF
![Page 5: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/5.jpg)
5
Components of OSPF
OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to maintain accurate information about the network
![Page 6: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/6.jpg)
6
Link-State Operation
If a neighbor is present, the OSPF-enabled router attempts to establish a neighbor adjacency with that neighbor
![Page 7: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/7.jpg)
7
Link-State Operation
LSAs contain the state and cost of each directly connected link
Routers flood their LSAs to adjacent neighbors Adjacent neighbors receiving the LSA immediately flood the
LSA to other directly connected neighbors, until all routers in the area have all LSAs
![Page 8: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/8.jpg)
8
Link-State Operation
It is a link-state database that represents the network topology. Build the topology table based on the received LSAs. This database eventually holds all the information about the
topology of the network. When converged, all routers in an area have identical
topology tables. Execute the SPF Algorithm. The table can be viewed via the show ip ospf database command.
![Page 9: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/9.jpg)
9
Link-State Operation
From the SPF tree, the best paths are inserted into the routing table
![Page 10: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/10.jpg)
10
Single-area and Multiarea OSPF
![Page 11: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/11.jpg)
11
Single-area and Multiarea OSPF
![Page 12: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/12.jpg)
12
Encapsulating OSPF Messages
![Page 13: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/13.jpg)
13
Types of OSPF Packets
![Page 14: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/14.jpg)
14
Hello Packet
OSPF Type 1 packet = Hello packet:• Discover OSPF neighbors and establish neighbor
adjacencies.• Advertise parameters on which two routers must agree to
become neighbors.• Elect the Designated Router (DR) and Backup Designated
Router (BDR) on multiaccess networks like Ethernet and Frame Relay.
![Page 15: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/15.jpg)
15
Hello Packet
![Page 16: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/16.jpg)
16
Hello Packet Intervals
OSPF Hello packets are transmitted:• To 224.0.0.5 in IPv4 and FF02::5 in IPv6 (all OSPF
routers)• Every 10 seconds (default on multiaccess and point-to-
point networks)• Every 30 seconds (default on non-broadcast multiaccess
[NBMA] networks)• Dead interval is the period that the router waits to receive
a Hello packet before declaring the neighbor down• Router floods the LSDB with information about down
neighbors out all OSPF enabled interfaces• Cisco’s default is 4 times the Hello interval
![Page 17: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/17.jpg)
17
Hello Packet Intervals
What will always happen if the dead interval expires before the router receives a hello packet from an adjacent DROTHER OSPF router?
OSPF will remove that neighbor from the router link-state database.
![Page 18: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/18.jpg)
18
Link-State Updates
A LSU packet contains the different types of link-state advertisements
![Page 19: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/19.jpg)
19
OSPF Operational States
When an OSPF router is initially connected to a network, it attempts to:
• Create adjacencies with neighbors• Exchange routing information• Calculate the best routes• Reach convergence• OSPF progresses through several states while attempting
to reach convergence.
![Page 20: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/20.jpg)
20
Establish Neighbor Adjacencies
![Page 21: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/21.jpg)
21
Establish Neighbor Adjacencies
The election of a DR and a BDR takes place on multiaccessnetworks, such as Ethernet networks.
![Page 22: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/22.jpg)
22
OSPF DR and BDR
![Page 23: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/23.jpg)
23
Synchronizing OSPF Database
![Page 24: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/24.jpg)
24
Synchronizing OSPF Database
![Page 25: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/25.jpg)
25
OSPF Network Topology
![Page 26: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/26.jpg)
26
Router IDs
Purposes of an OSPF router ID:• To uniquely identify the router within the OSPF domain • To facilitate router participation in the election of the
designated router Router ID Order of Precedence:
• Configured Router ID address• Loopback interface address• Highest active configured IP address
![Page 27: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/27.jpg)
27
The network Command
Which wildcard mask would be used to advertise the 192.168.5.96/27 network as part of an OSPF configuration?
0.0.0.31
![Page 28: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/28.jpg)
28
Passive Interface
By default, OSPF messages are forwarded out all OSPF-enabled interfaces. However, these messages really only need to be sent out interfaces connecting to other OSPF-enabled routers. Sending out unneeded messages on a LAN affects the
network in three ways:• Inefficient Use of Bandwidth• Inefficient Use of Resources• Increased Security Risk
The Passive Interface feature helps limiting the scope of routing updates advertisements.
![Page 29: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/29.jpg)
29
Configuring Passive Interfaces
Use the passive-interface router configuration mode command to prevent the transmission of routing messages through a router interface, but still allow that network to be advertised to other routers.
![Page 30: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/30.jpg)
30
OSPF Metric = Cost
Cost = reference bandwidth / interface bandwidth(default reference bandwidth is 10^8) Cost = 100,000,000 bps / interface bandwidth in bps
![Page 31: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/31.jpg)
31
OSPF Accumulates Costs
Cost of an OSPF route is the accumulated value from one router to the destination network.
![Page 32: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/32.jpg)
32
Adjusting the Reference Bandwidth
Use the command auto-cost reference-bandwidth Must be configured on every router in the OSPF domain Notice that the value is expressed in Mb/s:
Gigabit Ethernet - auto-cost reference-bandwidth 1000 10 Gigabit Ethernet - auto-cost reference-bandwidth 10000
![Page 33: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/33.jpg)
33
Default Interface Bandwidths
On Cisco routers, the default bandwidth on most serial interfaces is set to 1.544 Mb/s
![Page 34: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/34.jpg)
34
Adjusting the Interface Bandwidths
![Page 35: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/35.jpg)
35
Manually Setting the OSPF Cost
Both the bandwidth BW interface command and the ip ospf cost cost# command achieve the same result, which is to provide an accurate value for use by OSPF in determining the best route. The show interface interfaceID will show the
bandwidth of the interface
![Page 36: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/36.jpg)
36
Verify OSPF Neighbors
Verify that the router has formed an adjacency with its neighboring routers Shows the Neighbor ID
![Page 37: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/37.jpg)
37
Verify OSPF Protocol Settings
The show ip protocols command is used to check:• The OSPF process ID• The router ID• The networks the router is
advertising• The neighbors the router is
receiving updates from• The default administrative
distance
![Page 38: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/38.jpg)
38
Verify OSPF Process Information
Verify OSPF Process and ID
![Page 39: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/39.jpg)
39
Verify OSPF Interface Settings
![Page 40: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/40.jpg)
40
Basic OSPF Configuration
R1router ospf 10
network 192.168.2.0 0.0.0.255 area 0
network 10.0.10.0 0.0.0.3 area 0
R2router ospf 10
network 10.0.10.0 0.0.0.3 area 0
network 10.0.10.4 0.0.0.3 area 0
network 172.16.5.0 0.0.0.255 area 0
Process ID of 10Area 0
Configure R1 & R2 to use OSPF
Who is DR?
![Page 41: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/41.jpg)
41
OSPFv2 vs. OSPFv3
![Page 42: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/42.jpg)
42
Similarities Between OSPFv2 to OSPFv3
Similarities between OSPFv2 and OSPFv3:• They both are link-state protocols. • They both share the concept of multiple areas. • They both use the same DR/BDR election process• They both use the same packet types• They both use the same metric
![Page 43: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/43.jpg)
43
Differences Between OSPFv2 to OSPFv3
Which OSPFv3 function works differently from OSPFv2? authentication
![Page 44: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/44.jpg)
44
Link-Local Addresses
A Cisco router automatically uses an Ethernet interface MAC address available on the router, the FE80::/10 prefix, and the EUI-64 process to create link-local addresses on serial interfaces when OSPFv3 is implemented.
FF02::5 address is the all OSPF router addressFF02::6 is the DR/BDR multicast address
![Page 45: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/45.jpg)
45
Configuring Global-Unicast Addresses
![Page 46: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/46.jpg)
46
Configuring OSPFv3
A network administrator enters the command ipv6 router ospf 64 in global configuration mode. What is the result of this command?
The OSPFv3 process will be assigned an ID of 64 When configuring OSPFv3 on a router, which command
would be issued immediately before configuring the router ID?
ipv6 router ospf #
![Page 47: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/47.jpg)
47
Configuring OSPFv3
Single area OSPFv3 has been enabled on a router via the ipv6 router ospf 20 command. Which command will enable this OSPFv3 process on an interface of that router?
ipv6 ospf 20 area 0
![Page 48: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/48.jpg)
48
Link-Local Addresses
Link-local addresses are automatically created when anIPv6 global unicast address
is assigned to the interface (required).
Global unicast addresses are not required.
Cisco routers create the link-local address using FE80::/10 prefix and the EUI-64 process unless the router is configured manually,
EUI-64 involves using the 48-bit Ethernet MAC address, inserting FFFE in the middle and flipping the seventh bit. For serial interfaces, Cisco uses the MAC address of an Ethernet interface.
Notice in the figure that all three interfaces are using the same link-local address.
![Page 49: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/49.jpg)
49
Assigning Link-Local Addresses
Manually configuring the link-local address provides the ability to create an address that is recognizable and easier to remember.
![Page 50: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/50.jpg)
50
Configuring the OSPFv3 Router ID
Same as OSPFv2
![Page 51: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/51.jpg)
51
Configuring the OSPFv3 Router ID
![Page 52: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/52.jpg)
52
Enabling OSPFv3 on Interfaces
Instead of using the network router configuration mode command to specify matching interface addresses, OSPFv3 is configured directly on the interface.
![Page 53: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/53.jpg)
53
Verify OSPFv3 Neighbors/Protocol Settings
The show ipv6 ospf neighbor command will verify that a router that is running OSPFv3 has formed an adjacency with other routers in its OSPF area
![Page 54: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/54.jpg)
54
Verify OSPFv3 Neighbors/Protocol Settings
The show ipv6 protocols command will verify OSPFv3 configuration information including the OSPF process ID, the router ID, and the interfaces enabled for OSPFv3
![Page 55: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/55.jpg)
55
Verify OSPFv3 Interfaces
![Page 56: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/56.jpg)
56
Verify IPv6 Routing Table
The show ipv6 route ospf command will provide information specific to OSPFv3 routes in the routing table
![Page 57: Chapter 8: Single-Area OSPF - Elk Technologies · OSPF Routers Exchange Packets - These packets are used to discover neighboring routers and also to exchange routing information to](https://reader031.fdocuments.in/reader031/viewer/2022021811/5cd374be88c99316318b6b32/html5/thumbnails/57.jpg)
57