Chapter 7 Shells, Drafts, and Rib, Indent and Deform
description
Transcript of Chapter 7 Shells, Drafts, and Rib, Indent and Deform
Chapter 7Shells, Drafts, and Rib, Indent and Deform
1
Shell
2
Faces to be removed
Thickness of shell
IF you want the part to shell outward or inward
Multi-thickness Shell
» Choose a face, then set a thickness» And repeat for each face you want
3Faces to be removed
Thickness of shell
4
Split Lines
– Used to make lines on surfaces– Curves >> Split lines
• 3 Types:– Silhouette
» Based off of a plane– Projection
» Based off of a sketch– Intersection
» Based off of planes and surfaces 5
Draft
– 3 Types of Drafts• Neutral Plane
» Makes a draft based off of a neutral face• Parting Line
» Makes a draft starting from a parting lines• Step Draft• Makes a draft in two steps
6
Rib
7
Thickness of rib
Natural keeps the patternLinear turns it into a line
Convert Entities• Click lines on features, then choose
convert entities, and they will become sketch entities
8
Indent• Insert >> Features >> Indent• Indent let’s you remove material
from your part, by creating a new feature that will be removed.
• Need:– Part– A feature inside that part (do not merge
results)• Hide the added feature when
finished. 9
Indent
10
Features that will be removed
Whether you want it to just remove, or expand the hole
Body that will have the indent
Thickness of the removed hole
Deform• Insert >> Features >> Deform• 3 Types
– Point deform» Deforms the body at a point
– Curve to curve» Deforms the body onto a sketched curve
– Surface Push» Deforms the body around an object» Either one of their objects, or a separate
feature
11
Test Stats
Score Range Number of Students90-100 880-89 570-79 365-69 2Lower 3
12
Average 86.3Standard Deviation ±10
Median 88
Do Problem 7.4
13