CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is...
-
date post
21-Dec-2015 -
Category
Documents
-
view
242 -
download
6
Transcript of CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is...
![Page 1: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/1.jpg)
CHAPTER
5
Diffusion
5-1
![Page 2: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/2.jpg)
Atomic Diffusion in Solids
• Diffusion is a process by which a matter is transported through another material.
• Examples: Movement of smoke particles in air :
Very fast. Movement of dye in water : Relatively
slow. Solid state reactions : Very slow because
of bonding.
5-2
![Page 3: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/3.jpg)
Vacancy or Substitutional Diffusion mechanism
• Atoms diffuse in solids if Vacancies or other crystal defects are
present There is enough activation energy
• Atoms move into the vacancies present.
• More vacancies are created at higher temperature.
• Diffusion rate is higher at high temperatures.
5-3
![Page 4: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/4.jpg)
• Glass tube filled with water.• At time t = 0, add some drops of ink to one end of the tube.• Measure the diffusion distance, x, over some time.
to
t1
t2
t3
xo x1 x2 x3time (s)
x (mm)
DIFFUSION DEMO
![Page 5: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/5.jpg)
100%
Concentration Profiles0
Cu Ni
• Interdiffusion: In an alloy or “diffusion couple”, atoms tend to migrate from regions of large to lower concentration.
Initially (diffusion couple) After some time
100%
Concentration Profiles0
Adapted from Figs. 5.1 and 5.2, Callister 6e.
DIFFUSION: THE PHENOMENA (1)
![Page 6: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/6.jpg)
• Self-diffusion: In an elemental solid, atoms also migrate.
Label some atoms After some time
A
B
C
DA
B
C
D
DIFFUSION: THE PHENOMENA (2)
![Page 7: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/7.jpg)
Substitutional Diffusion
• Example: If atom ‘A’ has sufficient activation energy, it moves into the vacancy self diffusion.
• As the melting point increases, activation energy also increases
Activation Energy ofSelf diffusion
ActivationEnergy toform aVacancy
ActivationEnergy tomove a vacancy
= +
Figure 4.35
5-4
![Page 8: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/8.jpg)
Interstitial Diffusion mechanism
• Atoms move from one
interstitial site to another.
• The atoms that move must
be much smaller than the
matrix atom.
• Example:
Carbon interstitially
diffuses into BCC α or FCC
γ iron. Interstitial atomsMatrixatoms Figure 4.37
5-5
![Page 9: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/9.jpg)
Steady State Diffusion
• There is no change in concentration of solute atoms at different planes in a system, over a period of time.
• No chemical reaction occurs. Only net flow of atoms.
C1
C2
Net flow of atomsPer unit area perUnit time = J (the flux)Units m-2s-1
Solute atom flow
Diffusingatoms
UnitArea
ConcentrationOf diffusingatoms
Distance x
Figure 4.385-6
![Page 10: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/10.jpg)
Fick’s Law
• The flux or flow of atoms is given by
• i.e. for steady state diffusion condition, the net flow of atoms by atomic diffusion is equal to diffusion D times the diffusion gradient dc/dx .
• Example: Diffusivity (Diffusion Coefficient) of FCC iron at 500oC is 5 x 10-15 m2/S and at 1000oC is 3 x 10-11 m2/S (4 orders of magnitude greater)
dx
dcDJ
J = Flux or net flow of atoms.D = Diffusion coefficient. (m2s-1)
dx
dc= Concentration Gradient. (m-4)
5-7
![Page 11: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/11.jpg)
Diffusivity
• Diffusivity depends upon Type of diffusion : Whether the diffusion is
interstitial or substitutional. Temperature: As the temperature increases
diffusivity increases. Type of crystal structure: BCC crystal has lower
Atomic Packing Factor than FCC and hence has higher diffusivity.
Type of crystal imperfection: More open structures (grain boundaries) increases diffusion.
The concentration of diffusing species: Higher concentrations of diffusing solute atoms will increase diffusivity.
5-8
![Page 12: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/12.jpg)
Non-Steady State Diffusion
• Concentration of solute atoms at any point in metal changes with time in this case.
• Ficks second law:- Rate of compositional change is equal to diffusivity times the rate of change of concentration gradient.
dx
dcD
dx
d
dt
dC xx
Plane 1 Plane 2
Change of concentration of solute Atoms with change in time in different planes
5-9
![Page 13: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/13.jpg)
• Concentration profile, C(x), changes w/ time.
• To conserve matter: • Fick's First Law:
• Governing Eqn.:
Concentration, C, in the box
J (right)J (left)
dx
dCdt
=Dd2C
dx2
dx
dC
dtJ D
dC
dxor
J (left)J (right)
dJ
dx
dC
dt
dJ
dx D
d2C
dx2
(if D does not vary with x)
equate
NON STEADY STATE DIFFUSION
Fick’s second law
dx
dC
dtJ D
dC
dxor
J (left)J (right)
dJ
dx
dC
dt
dJ
dx D
d2C
dx2
(if D does not vary with x)
equate
dx
dC
dtJ D
dC
dxor
J (left)J (right)
dJ
dx
dC
dt
dJ
dx D
d2C
dx2
(if D does not vary with x)
equate
![Page 14: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/14.jpg)
• Copper diffuses into a bar of aluminum.
• Boundary conditions:For t = 0, C = C0 at x > 0For t > 0, C = Cs at x = 0
C = C0 at x = ∞
pre-existing conc., Co of copper atoms
Surface conc., Cs of Cu atoms bar
Co
Cs
position, x
C(x,t)
tot1
t2t3 Adapted from
Fig. 5.5, Callister 6e.
EX: NON STEADY STATE DIFFUSION
dCdt
=Dd2C
dx2
![Page 15: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/15.jpg)
• Copper diffuses into a bar of aluminum.
• General solution:
"error function".
C(x,t) Co
Cs Co
1 erfx
2 Dt
pre-existing conc., Co of copper atoms
Surface conc., Cs of Cu atoms bar
Co
Cs
position, x
C(x,t)
tot1
t2t3 Adapted from
Fig. 5.5, Callister 6e.
EX: NON STEADY STATE DIFFUSION
![Page 16: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/16.jpg)
Error Function
x
x dxexerf0
22)(
![Page 17: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/17.jpg)
• Suppose we desire to achieve a specific concentration C1 at a certain point in the sample at a certain time
PROCESS DESIGN EXAMPLE
Dt
xerf
CC
CtxC
s 21
),(
0
0
Dt
xerf
CC
CC
s 21constant
0
01
becomes
constant 2
Dt
x
![Page 18: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/18.jpg)
• Copper diffuses into a bar of aluminum.• 10 hours at 600C gives desired C(x).• How many hours would it take to get the same C(x) if we processed at 500C, given D500 and D600?
(Dt)500ºC =(Dt)600ºCs
C(x,t) CoC Co
=1 erfx
2Dt
• Result: Dt should be held constant.
• Answer:Note: valuesof D areprovided here.
Key point 1: C(x,t500C) = C(x,t600C).
Key point 2: Both cases have the same Co and Cs.
t500(Dt)600
D500
110hr
4.8x10-14m2/s
5.3x10-13m2/s 10hrs
PROCESSING QUESTION
![Page 19: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/19.jpg)
Industrial Applications of Diffusion – Case Hardening
• Sliding and rotating parts needs to have hard surfaces.
• These parts are usually machined with low carbon steel as they are easy to machine.
• Their surface is then hardened by carburizing.
• Steel parts are placed at elevated temperature (9270C) in an atmosphere of a hydrocarbon gas such as methane(CH4).
• Carbon diffuses into iron surface and fills interstitial space to make it harder.
5-11
![Page 20: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/20.jpg)
• Case Hardening: -- Example of interstitial diffusion is a case hardened gear. -- Diffuse carbon atoms into the host iron atoms at the surface.
• Result: The "Case" is --hard to deform: C atoms "lock" planes from shearing.
Fig. 5.0, Callister 6e.(Fig. 5.0 iscourtesy ofSurface Division, Midland-Ross.)
PROCESSING USING DIFFUSION (1)
--hard to crack: C atoms put the surface in compression.
![Page 21: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/21.jpg)
Carburizing
Low carbonSteel part
Diffusing carbonatoms
C %
Figure 4.43 bCarbon Gradients
In Carburized metals
(After “Metals handbook,” vol.2: “Heat Treating,” 8 th ed, American Society of Metals, 1964, p.100)5-12
![Page 22: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/22.jpg)
Carburizing
Carburizing Furnace
Carburized Gear
![Page 23: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/23.jpg)
Impurity Diffusion into Silicon wafer
• Impurities are made to diffuse into silicon wafer to change its electrical characteristics.
• Used in integrated circuits.
• Silicon wafer is exposed to vapor of impurity at 11000C in a quartz tube furnace.
• The concentration of
impurity at any point
depends on depth and
time of exposure.
Figure 4.44
(After W.R. Runyan, “ Silicon Semiconductor Technology,” McGraw-Hill, 1965.)5-13
![Page 24: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/24.jpg)
Effect of Temperature on Diffusion
• Dependence of rate of diffusion on temperature is given by
RT
QDD
RT
QDD
eDD RT
Q
303.2loglog
lnln
01010
0
0
or
or
D = Diffusivity m2/sD0 = Proportionality constant m2/sQ = Activation energy of diffusing species J/mol R = Molar gas constant = 8.314 J/mol.KT = Temperature (K)
5-14
![Page 25: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/25.jpg)
Effect of Temperature on Diffusion-Example
• If diffusivity at two temperatures are determined, two equations can be solved for Q and D0
• Example:-
The diffusivity of silver atoms in silver is 1 x 10-17 at 5000C and 7 x 10-13 at 10000C.
Therefore,
molKJQ
R
Q
TTR
Q
RTQ
RTQ
D
D
/183
773
1
1273
1exp
101
107
11exp
)/exp(
)/exp(
17
13
121
2
500
1000
Solving for activation energy Q
5-15
![Page 26: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/26.jpg)
Diffusivity Data for Some Metals
Solute Solvent D0
(M2/S)
Q KJ/m
ol
Carbon FCC Iron 2 x 10-5 142
Carbon BCC Iron 22 x 10-5 122
Copper Aluminum 1.5 x 10-5 126
Copper Copper 2 x 10-5 197
Carbon HCP Titanium
51 x 10-5 182
Figure 4.47
(After L.H. Van Vlack. “Elements of Materials Science and Engineering.” 5 th ed., Addison-Wesley, 1985. P.137.)5-16
![Page 27: CHAPTER 5 Diffusion 5-1. Atomic Diffusion in Solids Diffusion is a process by which a matter is transported through another material. Examples: Movement.](https://reader037.fdocuments.in/reader037/viewer/2022102606/56649d5a5503460f94a3a656/html5/thumbnails/27.jpg)
Diffusion FASTER for...
• open crystal structures
• lower melting T materials
• materials w/secondary bonding
• smaller diffusing atoms
• lower density materials
Diffusion SLOWER for...
• close-packed structures
• higher melting T materials
• materials w/covalent bonding
• larger diffusing atoms
• higher density materials
SUMMARY:STRUCTURE & DIFFUSION