CHAPTER 35 REFERENCE...

CHAPTER 35 REFERENCE STANDARDS

SECTION 3501 SCOPE

This chapter contains the designations, names and edition of standards referenced in this code listed alpha-numerically and the section numbers where they are referenced.

SECTION 3502 REFERENCED STANDARDS

Standard Designation Section

AA Specifications for Aluminum Structures, 2002.2 Aluminum Design Manual, 1994

AAMA 1402-86, Standard Specifications 1403.4.1 for Aluminum Siding, Soffit and Fascia

AAMA 203-98, Procedural Guide for 1707.4.2.2 the Window Inspection and Notification System

ACI 224.3R-95, Joints in Concrete 1909.3 Construction

ACI 216.1-97/TMS 0216.1-97, Standard 709.1.1 Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies

ACI 318-99, Building code 1604.4, Requirements for Structural Concrete T. 1610.1,

1707.1, 1804.6.1.1,

1901.1.2, 1903.1,

1903.4.3, 1903.5.1, 1903.5.3, 1903.6.1, 1903.6.4,

1903.8.2, 1904.5, 1905.6.4.5,

1906.2.3, 1908.1, 1908.3.1, 1908.3.2,

1908.5, 1908.6.2,

1908.6.5, 1916.1 ACI 506.2-95, Specifications for Shotcrete 1915.9 ACI 530/ASCE 5/TMS 402-99, 1403.1.5,

Building code Requirements for 1804.6.1.1, Masonry Structures 2103.1, 2103.2.1,

2105.3.1

ACI 530.1/ASCE 6/TMS 602-99, 1403.2.1, Specifications for Masonry Structures 2111.1.1

AF&PA Design Values for Joists and 2301.5 Rafters, 1991

FLORIDA BUILDING CODE — BUILDING 35.1

AF&PA 1991, National Design Specification 2314.4.7 for Wood Construction

AF&PA 1991, Design Values for Wood 2314.4.7 Construction

AF&PA 1992, Wood Structural Design Data 2314.4.7 AF&PA 1993, Working Stresses for 2314.4.7

Joists and Rafters AF&PA 1988, Wood Construction Data No. 1, 2314.4.7

House Framing AF&PA 1983, Wood Construction Data No. 3, 2314.4.7

Design of Wood Formwork for Concrete Structures

AF&PA 1989, Wood Construction Data No. 4, 2314.4.7 Plank-and-Beam Framing for Residential Building

AF&PA Wood Construction Data No. 6, 2314.4.7 Design of Wood Frame Structures for Permanence

AF&PA 1987, All-Weather Wood Foundation 2314.4.7 System, Design, Fabrication, Installation Manual

AF&PA Span Tables for Joists and 2307.3.1, Rafters, 1993 2309.1.1,2314.4.7

AF&PA Technical Report No. 7, The Permanent 1804.8, Wood Foundation System, 1/87 2306.3, 2314.4.7

AF&PA Wood Construction Data No. 5, Heavy 2301.2.5, Timber Construction Details, 1990 2314.4.7

AF&PA Wood Frame Construction 1606.1.1 Manual for One and Two-Family Dwellings - 1995 SBC High Wind Edition© 1996

AF&PA/ASCE 16-95, Load and Resistance 2301.2.5 Factor Design (LRFD) Standard for Engineered Wood Construction

AISC Detailing for Steel Construction 2214.3 AISC Engineering for Steel Construction 2214.3 AISC Iron and Steel Beams - 1873 to 1952 2214.3 AISC Load and Resistance Factor Design 2203.1,

Specification for Structural Steel Buildings, 1993 2214.3 AISC Plastic Design in Steel 2214.3 AISC Plastic Design of Braced Multistory 2214.3

Steel Frames AISC Serviceability Design Considerations 2214.3

for Low-Rise Buildings AISC Simple Shear Connection, ASD 2214.3 AISC Simple Shear Connections, LRFD 2214.3 AISC Manual of Steel Construction, 2214.3

Allowable Stress Design AISC Specification for Structural Steel 2203.1,

Buildings-Allowable Stress Design and Plastic Design, 1989

AISC Specification for the Design of 2203.1 Hollow Structural Sections, 1997

35.2 FLORIDA BUILDING CODE — BUILDING

Reference Standards

AISI Design Manual for Structural Tubing 2214.3 AISI Designing Fire Protection for Steel Trusses 2214.3 AISI Designing Fire Protection for Steel Columns 2214.3 AISI Fire-Resistant Steel-Frame Construction 2214.3 AISI Fire-Safe Structural Steel - A Design 2214.3

Guide AISI Specifications for Design of Light-Gage 2214.3

Cold-Formed Stainless Structural Members AISI Specification for the Criteria for 2214.3

Structural Application of Steel Cables for Buildings

AISI Specification for the Design of Cold- 2204.1, Formed Steel Structural Members, 1996 2204.3.1 Edition

AISC Torsional Analysis of Steel Members 2214.3

AITC 104-84, Typical Construction Details 2301.2.5, 2314.4.2

AITC 106, Code of Suggested Practices 2314.4.2 AITC 108, Standard for Heavy Timber 2314.4.2

Construction AITC 109, Standard for Preservative 2314.4.2

Treatment for Structural Glued Laminated Timber

AITC 110-84, Standard Appearance Grades 2314.4.2, for Structural Glued Laminated Timber 2301.2.5

AITC 112-93, Standard for Tongue-and- 2314.4.2, Groove Heavy Timber Roof Decking 2301.2.5

AITC 113-93, Standard for Dimensions 2314.4.2, of Structural Glued Laminated Timber 2301.2.5

AITC 117-93, Standard Specifications for 2314.4.2, Structural Glued Laminated Timber 2301.2.5 of Softwood Species-Design (with February 27, 1998 Addendum)

AITC 119-96, Standard Specifications for 2314.4.2, Structural Glued Laminated Timber of 2301.2.5 Hardwood Species

AITC Technical Note 7, Calculation of 709.6.3.4, Fire Resistance of Glued Laminated Timbers, 2314.4.2 Sept. 1984, (updated January 1996)

ANSI A13.1-81, Scheme for the Identification 408.7.3 of Piping Systems

ANSI A90.1-85, Safety Standard for Manlifts 3004 ANSI A108.1-85, Glazed Wall Tile, Ceramic 2104.10

Mosaic Tile, Quarry Tile and Paver Tile Installed with Portland Cement Mortar

ANSI A108.4-85, Ceramic Tile Installed 2104.10.7 with Organic Adhesives or Water-Cleanable Tile Setting Epoxy Adhesive

ANSI A108.5-85, Ceramic Tile Installed 2104.10.1, with Dry-Set Portland Cement Mortar 2104.10.3 or Latex Portland Cement Mortar

ANSI A108.6-85, Ceramic Tile Installed 2104.10.4 with Chemical-Resistant, Water-Cleanable Tile-Setting-and-Grouting Epoxy

ANSI A108.7-85, Electrically Conductive 2104.10.2 Ceramic Tile Installed with Conductive Dry-Set Portland Cement Mortar

ANSI A108.8-85, Ceramic Tile Installed 2104.10.5 with Chemical-Resistant Furan Mortar and Grout

ANSI A108.9-85, Ceramic Tile Installed 2104.10.6 with Modified Epoxy Emulsion Mortar/Grout

ANSI A108.10-85, Installation of Grout 2104.10.8 in Tilework

ANSI AU8.1-85, Dry-Set Portland 2104.10.1 Cement Mortar

ANSI Al 18.2-85, Conductive Dry-Set 2104.10.2 Portland Cement Mortar

ANSI A118.3-85, Chemical-Resistant, Water- 2104.10.4 Cleanable Tile-Setting and Grouting Epoxy and Water Cleanable Tile-Setting Epoxy Adhesive

ANSI A118.4-85, Latex-Portland Cement 2104.10.3 Mortar

ANSI A118.5-85, Chemical-Resistant Furan 2104.10.5 Mortar and Grout

ANSI Al 18.6-85, Ceramic Tile Grouts 2104.10.8 ANSI Al 18.8-85, Modified Epoxy Emulsion 2104.10.6

Mortar/Grout ANSI A136.1-85, Organic Adhesives for 2104.10.7

Installation of Ceramic Tile ANSI A137.1-80, Ceramic Tile 2104.4 ANSI A208.1-93, Particleboard 1403.6.6,

2301.4.5, 2301.4.5.1,2303.3

ANSI B31.3-84, Chemical Plant and Petroleum 408.7.1 Refinery Piping Including Addendum B31.3b-1986

ANSI Z97.1-84, Safety Glazing Materials used 1706.1, in Buildings-Safety Performance 2405.1, Specifications and Methods of Test 2405.5.4,

2604.14

ANSI/AF&PA National Design Specification 709.6.3.3, for Wood Construction, 1997 and Design 2301.2.5, Values for Wood Construction, 1997 2310.3.2, a Supplement to the National 2313.3 Design Specification

ANSI/AAMA/NWWDA101/IS2-97, 1707.4.2.1 Voluntary Specifications for Aluminum, 2411.3.2.1 Vinyl (PVC) and Wood Windows and Glass Doors

ANSI/AHA Recommended Product and 2314.4.1 Application Specification—Structural Insulating Roof Deck, LB. Spec. No. 1

ANSI/AHA Recommended Product and 2314.4.1 Application Specification—1/2 inch Fiberboard Nail-Base-Sheathing I.B., Spec. No. 2

ANSI/AHA Recommended Product and 2314.4.1 Application Specification—1/2 inch Intermediate Fiberboard Sheathing LB. Spec. No. 3


Reference Standards

ANSI/AHA A135.4-82 Basic Hardboard 2314.4.1 ANSI/AHAA135.4-95 Basic Hardboard 2301.4.9 ANSI/AHA A135.5-82 Prefinished Hardboard 2314.4.1

Paneling ANSI/AHA A135.5-95 Prefinished Hardboard 2301.4.9

Paneling ANSI/AHA Al35.6-90, Hardboard Siding 1403.6.5,

2301.4.9, 2314.4.1

ANSI/AHA A194.1-85, Cellulosic Fiberboard 2301.4.4, 2314.4.1

ANSI/AITC A190.1-92, Standard for 2301.4.2, Structural Glued Laminated Timber 2314.4.2

ANSI/APA Design Construction Guide, 2314.4.3 Residential and Commercial

ANSI/APA Design/Construction Guide 2314.4.3 Diaphragms

ANSI/APA Performance Standards and 2314.4.3 Policies for Structural-Use Panels

ANSI/APA Plywood Folded Plate, 2314.4.3 Laboratory Report 21

ANSI/APA 303,. Siding Manufacturing 2314.4.3 Specifications

ANSI/APA 1-84, Floors and Flooring-Mosaic- 2301.4.8 Parquet Hardwood Slat Flooring

ANSI/AWS B2.1, Standard Welding Procedure 2214.3 and Performance Qualification

ANSI/AWS C5.4, Recommended Practice for 2214.3 Stud Welding

ANSI/AWS D1.1, Structural Welding Code- Steel 2214.3 ANSI/AWS D1.3, Structural Welding Code- 2214.3

Sheet Metal ANSI/AWS D9.1, Specification for Welding of 2214.3

Sheet Metal ANSI/AWS D10.9, Standard for Qualification 2214.3

of Welding Procedures and Welders for Piping and Tubing

ANSI/ASCE 3-91, Standard for the Structural 1901.1.2, Design of Composite Slabs 2211

ANSI/ASCE 8, Specifications for Design 2214.3 of Cold-Formed Stainless Steel Structural Members

ANSI/ASCE 11-99, Guidelines for Structural 2003.2 Condition Assessment of Existing Buildings

ANSI/ASME A17.1-90, Standard Safety Code 11-4.10.1 for Elevators, Dumbwaiters, Escalators and Moving Walks

ANSI/ASME A17.1-96, Standard Safety 3001.1.2, Code for Elevators, Dumbwaiters, 3003.1.1, Escalators and Moving Walks 3003.1.8,

3003.2, 3003.8 ANSI/ASME B 18.6.1-81, Wood Screws 1506.5.2

(inch series)

ANSI/AWS Dl.4-92, Structural Welding 1903.5.2, Code—Reinforcing Steel 2214.3

ANSI/BHMA A156.10-85 Power Operated 11-4.13.12 Pedestrian Doors

ANSI/BHMA A156.10-99 Power Operated 1012.2.1 Pedestrian Doors

ANSI/BHMA A156.19-84 Power Assist and 11-4.13.12 Low Energy Power Operated Doors

ANSI/BHMA A156.19-97 Power Assist and 1012.2.2 Low Energy Power Operated Doors

ANSI/DASMA 107-97, Room Fire Test 2603.5.1.9 Standard for Garage Doors Using Foam Plastic Insulation

ANSI/HPMA LHF-82, Laminated Hardwood 2301.4.8 Flooring

ANSI/HPVAHP-1-1994, American 2301.4.7 National Standard for Hardwood and Decorative Plywood

ANSI/NAAMM FP 1001-97, Guide 1606.1.1 Specifications for Design Loads of Metal Flagpoles

ANSI/NFPA 52-92, Compressed Natural Gas 407.18.1 (CNG) Vehicular Fuel Systems

ANSI/RMI, Industrial Steel Storage 2214.3 Racks Manual

ANSI/RMI MH16.2, Manual of Safety Practices 2214.3 A Code of Practices for the Use of Industrial and Commercial Steel Storage Racks

ANSI/SMAMH281, Specification for the Design, 2214.3 Testing, Utilization and Application of Industrial Grade Steel Shelving

ANSI/SPRI RP-4-1988, Wind Design Guide 1504.4 for Ballasted Single-Ply Roofing

ANSI/TIA/EIA-222-F-96, Structural 1606.1.1 Standards for Steel Antenna Supporting Structures

ANSI/TPI 1-1995, National Design Standard 2301.2.5, for Metal-Plate-Connected Wood Truss 2301.4.10, Construction 2309.2.2,

2314.4.9

APA Design/Construction Guide, Residential 2301.2.5 & Commercial Cantilevered In-Line Joist System, 1986

APA Plywood Design Specification, 1986 2301.2.5, 2314.4.3

APA Plywood Design Specification Supplement 2301.2.5, 1 -Design and Fabrication of Plywood 2314.4.3 Curved Panels

APA Plywood Design Specification Supplement 2301.2.5, 2-Design and Fabrication of Plywood- 2314.4.3 Lumber Beams

APA Plywood Design Specification Supplement 2301.2.5, 3- Design and Fabrication of Plywood 2314.4.3 Stressed-Skin Panels

Reference Standards

APA Plywood Design Specification Supplement 2301.2.5, 4 -Design and Fabrication of Plywood 2314.4.3 Sandwich Panels

APA Plywood Design Specification Supplement 2301.2.5, 5 -Design and Fabrication of All 2314.4.3 Plywood Beams

APA Plywood Folded Plate, Laboratory 2314.4.3 Report 21

APA Design/Construction Guide Diaphragms 2314.4.3 APA Performance Standards and Policies 2314.4.3

for Structural-Use Panels APA 303 Siding Manufacturing Specifications 2314.4.3

ASCE 7-88 Minimum Design Loads for 3107.6 Buildings and Other Structures

ASCE 7-95, Minimum Design Loads for 411.10.4 Buildings and Other Structures

ASCE 7-98, Minimum Design Loads for 1606.1.1, Buildings and Other Structures 1601.2.2,

1606.3.3 1611, 1617, 1619, 1622

ASCE 8-90, Specification for the Design of 2204.2, Cold-formed Stainless Steel Structural 2204.3.1 Members

ASCE 17-96, Air Supported Structures 3105.1 ASCE 19-95, Structural Applications of Steel 2206.1

Cables for Buildings

ASTM A 6/A6M 94b, Specification for General 2209, Requirements for Rolled Structural Steel bars 2214.3 Plates, Shapes, and Sheet Piling

ASTM A 36-36M 94, Specification for Carbon 1807.1, Structural Steel 2104.9.5

ASTM A 82-88, Steel Wire, Plain, for 2104.9.2.1, Concrete Reinforcement 2104.9.5

ASTM A 153-82(1987), Zinc Coating 1506.5.3, (Hot-Dip) on Iron and Steel Hardware 2104.9.6

ASTM A 167-94a, Specification for Stainless 1506.5.3, and Heat-Resisting Chromium-Nickel 2104.9.2.1,

Steel Plate, Sheet, and Strip 2104.9.5, 2104.9.6 ASTM A 185-90a, Specification for Steel 2104.9.4,

Welded Wire, Plain, for Concrete 2104.9.5 Reinforcement

ASTM A 185-97, Standard Specification 1909.3 for Steel Welded Wire Reinforcement Fabric, 2104.9.5 Plain, for Concrete Reinforcement

ASTM A 252-93, Specification for Welded and 1807.1, Seamless Steel Pipe Piles 1808.1.1

ASTM A 283/A 283M-93a, Specification for 1807.1, Low and Intermediate Tensile Strength 1808.1.1 Carbon Steel Plates

ASTM A 325-94, Specification for Structural 2208, Bolts, Steel, Heat-Treated, 120/105 Ksi 2214.3 Minimum Tensile Strength

ASTM A 366/A 366M-91 (1993), Specification 2104.9.5 for Steel, Sheet, Carbon, Cold-Rolled, Commercial Quality

ASTM A 416-90a, Steel Strand, Uncoated 1810.3.2 Seven-Wire for Prestressed Concrete


ASTM A 490-93, Specification for Heat-Treated, 2208, Steel Structural Bolts, 150 ksi Minimum 2214.3 Tensile Strength

ASTM A 496-90a, Specification for Steel Wire, 2104.9.3 Deformed, for Concrete Reinforcement

ASTM A 497-90b, Specification for Steel 2104.9.4 Welded Wire Fabric, Deformed, for Concrete Reinforcement

ASTM A 525-87, General Requirements for 2104.9.6 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process

ASTM A 572/A 572M-94b, Specification for 1807.1 High-Strength Low-Alloy Columbium-Vanadium Structural Steels

ASTM A588/A588M-94, Specification for 1807.1 High-Strength Low-Alloy Structural Steel with 50 ksi (345 Mpa) Minimum Yield Point to 4 Inches Thick

ASTM A 615-94, Specification for Deformed 2104.9.1 and Plain Billet-Steel Bars for Concrete Reinforcement

ASTM A 616-92, Specification for Rail-Steel 2104.9.1 Deformed and Plain Bars for Concrete Reinforcement

ASTM A 617-92, Specification for Axle- 2104.9.1 Steel Deformed and Plain Bars for Concrete Reinforcement

ASTM A 641-82, Zinc-Coated (Galvanized) 1506.5.1, Carbon Steel Wire 1506.5.2,

2104.9.6 ASTM A 653-96, Specification for Steel T. 1507.5.3,

Sheet, Zinc-Coated (Galvanized) or T. 1508.4.3 Zinc-Iron Alloy-Coated (Galvannealed) by T. 2213.1A, the Hot-Dip Process T. 2213.1B,

ASTM A 690/A 690M-94, Specification for 1807.1 High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments

ASTM A 706-92b, Low-Alloy Steel Deformed 1903.5.2, Bars for Concrete Reinforcement 2104.9.1

ASTM A 755-95, Steel Sheet, Metallic- T. 1507.5.3, Coated by the Hot-Dip Process and T. 1508.4.3 Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

ASTM A 792-96, Steel Sheet, 55% T.1507.5.3, Aluminum-Zinc Alloy-Coated by the T. 1508.4.3 Hot-Dip Process

ASTM B 101-92, Lead-Coated Copper T.1507.5.3, Sheets T. 1508.4.3

ASTM B 209-96, Specification for T.1507.5.3, Aluminum and Aluminum-Alloy T.1508.4.3 Sheet and Plate

ASTM C 5-92, Quicklime for Structural T. 2503 Purposes

ASTM C 28-96 , Gypsum Plasters T. 2503 ASTM C 29-87, Test for Unit Weight and 703.8,

Voids in Aggregate 703.9

1904.1.2, T. 1904D, T. 1904F,

T.2503 ASTM C 172-90, Sampling Freshly Mixed 1905.6.2.1

Concrete ASTM C 192-90a, Making and Curing 1905.3.3.2

Concrete Test Specimens in the Laboratory ASTM C 206-92, Finishing Hydrated Lime T.2503 ASTM C 212-93, Structural Clay Facing Tile 703.3,

2104.2 ASTM C 216-95a, Facing Brick (Solid 703.2,

Masonry Units Made from Clay or Shale) 2104.2 ASTM C 23 l-89a, Test for Air Content of 1904.2.1

Freshly Mixed Concrete by the Pressure Method ASTM C 270-92, Mortar for Unit Masonry 2104.7.1,

T.2104.7B ASTM C 315-96, Specification for Clay 2114.3.3,

Flue Linings T.2114.3.5A, T.2114.3.5B

ASTM C 317-93a, Gypsum Concrete 1913.1 ASTM C 330-89, Lightweight Aggregates for 1903.3.1

Structural Concrete ASTM C 331-94, Lightweight Aggregates for 709.3.2,

Concrete Masonry Units 709.4.1.1.3 ASTM C 332-87, Lightweight Aggregates for 709.3.2

Insulating Concrete ASTM C 406-89, Standard Specification for 1507.8.4

Roofing Slate ASTM C 442-95(1988), Gypsum Backing Board 202,

and Coreboard T.2503 ASTM C 474-96, Test Methods for Joint T.2503

Treatment Materials for Gypsum Board Construction

ASTM C 475-94, Joint Compound and Joint T.2503 Tape for Finishing Gypsum Board

ASTM C 476-91, Grout for Masonry 2104.7.2, ASTM C 503-89, Specification for Marble 2104.3

Dimension Stone (Exterior) ASTM C 514-94, Nails for the Application T.2306.1,

of Gypsum Board T.2506 ASTM C 516-96, Standard Specification for 709.4.1.1.3

Vermiculite Loose Fill Thermal Insulation ASTM C 530-93, Structural Clay Non Load 2104.2

Bearing Screen Tile ASTM C 549-95, Standard Specification 709.4.1.1.3

for Perlite Loose Fill Insulation ASTM C 568-89, Specification for Limestone 2104.3

Dimension Stone ASTM C 587-91, Gypsum Veneer Plaster 703.5.6,

T.2503 ASTM C 588-95 a, Gypsum Base 703.5.5,

for Veneer Plasters T.2503 ASTM C 595-94a, Blended Hydraulic 1903.2, 1904.1.2,

Cement T. 1904D, T. 1904F,

T.2503 ASTM C 615-92, Specification for Granite 2104.3

Dimension Stone


ASTM C 31-91, Making and Curing Concrete 1905.6.2.2, Test Specimens in the Field 1905.6.3.2

ASTM C 33-93, Concrete Aggregates 709.3.2, 709.4.1.1.3,

1903.3.1, T. 1904 A

ASTM C 34-93, Structural Clay Load- 703.3, Bearing Wall Tile 2104.2

ASTM C 35-95, Inorganic Aggregates for 703.8, Use in Gypsum Plaster 703.9,

T.2503 ASTM C 36-95b, Gypsum Wallboard 202, 703.5.3,

F.709.5.1B, F.709.5.1C,

T.2503 ASTM C 37-95, Gypsum Lath 703.5.1,

T.2503 ASTM C 39-93a, Test Method for 1905.6.2.2

Compressive Strength of Cylindrical Concrete Specimens

ASTM C 42-90, Obtaining and Testing Drilled Cores and Sawed Beams of Concrete 1905.6.4.2

ASTM C 55-85, Concrete Building Brick 703.2, T.709.3.1,

2104.1 ASTM C 56-93, Structural Clay Non Load 703.3,

Bearing Tile 2104.2 ASTM C 61-95, Gypsum Keene's Cement T.2503 ASTM C 62-92c, Building Brick (Solid 703.2,

Masonry Units Made from Clay or Shale) 2104.2 ASTM C 67-93a, Sampling and Testing 709.4.1.1.1,

Brick and Structural Clay Tile 1507.4.5.2.1, 2111.5

ASTM C 73-85, Calcium Silicate Face Brick 703.2, (Sand-Lime Brick) T.709.3.1,

2104.1 ASTM C 79- 97, Gypsum Sheathing Board 202, 703.5.4,

T.2503 ASTM C 90-90, Hollow Load-Bearing 703.7,

Concrete Masonry Units T.709.3.1, 2104.1

ASTM C 91 -91, Masonry Cement T.2503 ASTM C 94-94, Ready-Mixed Concrete 1906.2.2 ASTM C 1116-97, Standard Specification 1909.3

for Fiber-Reinforced Concrete and Shotcrete ASTM C 126-94, Ceramic Glazed Structural 703.2,

Clay Facing Tile, Facing Brick, and Solid 2104.2 Masonry Units

ASTM C 129-85, Non Load-Bearing 703.7 Concrete Masonry Units

ASTM C 140-90, Sampling and Testing T.709.3.1, Concrete Masonry Units 1507.4.5.2.1

ASTM C 143-90a, Standard Test Method 1804.6.2.5 for Slump of Hydraulic Cement Concrete 1916.6.1

ASTM C 150-94, Portland Cement 1903.2,

Reference Standards


Reference Standards

ASTM C 616-89, Specification for Quartz- 2104.3 Based Dimension Stone

ASTM C 618-94a, Fly Ash and Raw or 1903.6.5, Calcined Natural Pozzolan for Use as 1904.1.2, a Mineral Admixture in Portland Cement T. 1904F Concrete

ASTM C 629-89, Specification for Slate 2104.3 Dimension Stone

ASTM C 630-95 a, Water-Resistant Gypsum 703.5.8, Backing Board T.2503

ASTM C 631 -95 a, Bonding Compounds T.2503 for Interior Gypsum Plastering

ASTM C 635-91, Metal Suspension Systems 804.2.2 for Acoustical Tile and Lay-In Panel Ceilings

ASTM C 636-91, Installation of Metal Ceiling 804.2.2 Suspension Systems for Acoustical Tile and Lay-In Panels

ASTM C 645-95a, Non Load (Axial) Bearing T.2503 Steel Studs, Runners (Tracks) and Rigid Furring Channels for Screw Application of Gypsum Board

ASTM C 652-94, Hollow Brick (Hollow 703.2, Masonry Units Made from Clay 2104.2 or Shale)

ASTM C 685-94, Concrete Made by Volumetric 1906.2.2 Batching and Continuous Mixing

ASTM C 744-73 (1985), Prefaced Concrete 2104.1 and Calcium Silicate Masonry Units ASTM C 754-95a, Installation of Steel 2504.5.1,

Framing Members to Receive Screw- 2505 Attached Gypsum

ASTM C 836-89a, High-Solids Content, 1508.9.2 Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

ASTM C 841 -90, Installation of Interior 2504.1.1 Lathing and Furring

ASTM C 842-85 (1990), Application of 2504.1.2 Interior Gypsum Plaster

ASTM C 843-94, Application of Gypsum 2504.4.2 Veneer Plaster

ASTM C 844-85 (1990), Application of 2504.4.2 Gypsum Base to Receive Gypsum Veneer Plaster

ASTM C 845-90, Expansive Hydraulic- 1903.2, Cement 1904.1.2,

T. 1904F ASTM C 847-95, Metal Lath 703.6.1,

T.2503 ASTM C 887-79a, Specification for Packaged, 2104.8

Dry Combined Materials for Surface Bonding Mortar

ASTM C 926-94, Application of Portland 2504.1.3, Cement Based Plaster 2504.2.1

ASTM C 931-95a, Exterior Gypsum 703.5.7, Soffit Board T.2503

ASTM C 933-80, (1990), Welded Wire Lath 703.6.4 ASTM C 946-91, Practice for Construction 2104.8,

of Dry-Stacked, Surface-Bonded Walls 2105.4

ASTM C 954-93, Steel Drill Screws for the T.2503 Application of Gypsum Board or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm) to 0.112 inch (2.84 mm) in thickness

ASTM C 955-95b, Load Bearing (Transverse T.2503 and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging, for Screw Application of Gypsum Board and Metal Plaster Bases

ASTM C 956-94, Installation of 1913.1 Cast-in-Place Reinforced Gypsum Concrete

ASTM C 957-93, High-Solids Content, 1508.9.2 Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface

ASTM C 960-95, Predecorated Gypsum Board T.2503 ASTM C 989-93, Ground Granulated Blast- 1903.6.6,

Furnace Slag for Use in Concrete 1904.1.2, and Mortars T. 1904F

ASTM C 1002-93, Steel Drill Screws for T.2503 the Application of Gypsum Board or Metal Plaster Bases

ASTM C 1007-83 (1990), Installation of Load 2504.5.2 Bearing (Transverse and Axial) Steel Studs and Related Accessories

ASTM C 1029-90, Spray-Applied Rigid 1508.8.2 Cellular Polyurethane Thermal Insulation

ASTM C 1032-95, Woven Wire Plaster Base 703.6.5 ASTM C 1047- 95, Accessories for Gypsum T.2503

Wallboard and Gypsum Veneer Base ASTM C 1063-94, Installation of Lathing 2504.2.2

and Furring to Receive Interior and Exterior Portland Cement Based Plaster

ASTM C 1077-87, Testing Concrete and 1903.8.2 Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluations

ASTM C 1088-94, Thin Brick Veneer 2104.2 Units Made from Clay or Shale

ASTM C 1116-97, Standard Specification 1909.3 for Fiber-Reinforced Concrete and Shotcrete

ASTM C 1167-96, Clay Roof Tiles 1507.4.5.1, 1507.4.5.2

ASTM C 1177-91, Glass Mat Gypsum T.2503 Substrate for Use as Sheathing

ASTM C 1178-93, Glass Mat Water-Resistant T.2503 Gypsum Backing Board

ASTM C 1218-92el, Test Method for 1904.4 Water-Soluble Chloride in Mortar and Concrete

ASTM C 1240-93, Silica Fume for Use 1904.1.2, in Hydraulic-Cement Concrete T.1904F and Mortar

ASTM C 1280-94, Application of 2504.6 Gypsum Sheathing Board

ASTM D 25-88a, Round Timber Piles 1811.1 ASTM D 224-89, Smooth-Surfaced Asphalt 1507.3.9.2,

Roll Roofing (Organic Felt) 1507.7.4 ASTM D 225-95, Asphalt Shingles 1507.3.5

(Organic Felt) Surfaced with Mineral Granules


ASTM D 226-95, Asphalt-Saturated Organic 1507.3.3, Felt Used in Roofing and 1507.4.3, Waterproofing 1507.6.3,

1507.7.3, 1507.8.3, 1507.9.1, 1507.9.2,

1507.10.3, 1507.10.4, T.1508.3.2

ASTM D 227-95, Coal-Tar-Saturated T.1508.3.2 Organic Felt Used in Roofing and Waterproofing

ASTM D 249-89, Asphalt Roll Roofing 1507.4.3, (Organic Felt) Surfaced with Mineral Granules 1507.7.4

ASTM D 312-95, Asphalt Used in Roofing T.1508.3.2 ASTM D 371-89, Asphalt Roll Roofing 1507.7.4

(Organic Felt) Surfaced with Mineral Granules; Wide Selvage

ASTM D 422-63 (1972), Particle-Size Analysis 1804.3.2 of Soils

ASTM D 450-91, Coal-Tar Pitch Used T.1508.3.2 in Roofing, Dampproofing and Waterproofing

ASTM D 635-88, Test for Rate of Burning 202, and/or Extent and Time of Burning 3108.5.1 of Self-Supporting Plastics in a Horizontal Position

ASTM D 1143-81 (1987), Testing Piles 1706.1, Under Static Axial Compressive Load 1806.4

ASTM D 1227-87, Emulsified Asphalt Used 1508.9.2 as a Protective Coating for Roofing

ASTM D 1557-91, Laboratory Compaction 1804.2.1 Characteristics of Soil Using Modified Effort

ASTM D 1761-77, (1988) Testing Mechanical 1706.1, Fasteners In Wood 1707.3.1, 2314.4.4

ASTM D 1863-86, Mineral Aggregate Used T.1508.3.2 on Built-Up Roofs

ASTM D 1929-77 (1985), Ignition Properties 202, of Plastics 2604.7.1.2

ASTM D 1970-95, Self-Adhering Polymer 1507.3.4, Modified Bituminous Sheet Materials 1507.3.9.2 Used as Steep Roof Underlayment for Ice Dam Protection

ASTM D 2178-89, Asphalt Glass Felt Used T.1508.3.2 in Roofing and Waterproofing

ASTM D 2626-95, Asphalt Saturated and 1507.4.3, Coated Organic Felt Base Sheet Used T.1508.3.2 in Roofing

ASTM D 2843-88, Test for Density of 202 Smoke from the Burning or Decomposition of Plastics

ASTM D 2898-94, Test for Accelerated 1505.1, Weathering of Fire-Retardant-Treated Wood 1505.6, for Fire Testing 2301.8.3,2314.4.4

ASTM D 3161-99A, Standard Test Method 1507.3.7 for Wind Resistance of Asphalt Shingles

(Fan-Induced Method) Modified to 110 mph Wind Velocity

ASTM D 3201-86, Hygroscopic Properties 2301.8.4 of Fire-Retardant Wood and Wood-Base Products

Reference Standards

ASTM D 3462-93a, Asphalt Shingles Made 1507.3.5 from Glass Felt and Surfaced with Mineral Granules

ASTM D 3468-90, Liquid-Applied Neoprene 1508.9.2 and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

ASTM D 3498, Standard Specifications for 2314.4.4 Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

ASTM D 3679-88, Rigid Poly (Vinyl Chloride) 1403.9.1 (PVC) Siding

ASTM D 3689-83, Testing Individual Piles 1706.1, Under Static Axial Tensile Load 1806.7

ASTM D 3746-85, Impact Resistance of 1504.6 Bituminous Roofing Systems

ASTM D 3909-95a, Asphalt Roll Roofing 1507.7.4, (Glass Felt) Surfaced with Mineral T. 1508.3.2 Granules

ASTM D 4272-90a, Total Energy Impact 1504.6 of Plastic Films by Dart Drop

ASTM D 4318-84, Test Method for Liquid 1804.3.2 Limit, Plastic Limit and Plasticity Index of Soils

ASTM D 4434-87, Poly (Vinyl Chloride) 1508.7.2 Sheet Roofing

ASTM D 4601-95, Asphalt-Coated Glass T. 1508.3.2 Fiber Base Sheet Used in Roofing

ASTM D 4637-87, Vulcanized Rubber Sheet 1508.6.2 Used in Single-Ply Roof Membrane

ASTM D 4869-89 (1993), Asphalt-Saturated 1507.3.3 Organic Felt Underlayment Used in Roofing

ASTM D 4897-89, Asphalt-Coated Glass T.1508.3.2 Fiber Venting Base Sheet Used in Roofing

ASTM D 4990-89, Coal Tar Glass Felt Used T.1508.3.2 in Roofing and Waterproofing

ASTM D 5055-90, Establishing and 2301.4.11 Monitoring Structural Capacities of

Prefabricated Wood I-Joists ASTM D 6162-97, Styrene Butadiene 1508.5.2

Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

ASTM D 6163-97, Styrene Butadiene 1508.5.2 Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

ASTM D 6164-97, Styrene Butadiene 1508.5.2 Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

ASTM E 72-80, Conducting Strength Tests 1706.1 of Panels for Building Construction

ASTM E 84-97, Test Method for Surface 202, Burning Characteristics of Building 708.1, 708.4, Materials 803.2,803.4,

803.5.1,803.5.2, 2314.4.4,2603.4,2603.6.4,

3105.4.6,3106.2,3204.2


Reference Standards

ASTM E 108-95, Test Methods for Fire 1505.1, Tests of Roof Coverings 1505.6,

2603.7, 2604.6.3, 3105.4.3

ASTM E 119-95a, Test Methods for Fire 202, 601.3.1, Tests of Building Construction and 601.4.1, Materials 701.2.1,

701.2.4, 705.2.1.5,

705.5.1, 705.5.1.1,

705.6.1, 705.6.1.1,

705.7.2, 2603.5,

2603.6.1 ASTM E 136-96a, Test Method for Behavior 202,

of Materials in a Vertical Tube Furnace 3105.4.2 at 750°C.

ASTM E 196-80 (1985), Gravity Load Testing 1706.1 of Floors and Flat Roofs

ASTM E 330-84, Standard Test Method for 1706.1 Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference

ASTM E 447-84, Standard Test Methods 1706.1 for Compressive Strength of Masonry Prisms

ASTM E 605-77 (1982), Tests for Thickness 1708.1.2, and Density of Sprayed Fire-Resistive 1708.1.3 Material Applied to Structural Members

ASTM E 736-92, Standard Test Method for 1708.1.4 Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

ASTM E 814-88, Standard Method of Fire 202, Tests of Through-Penetration Fire Stops 705.5.1.2,

705.6.1.2, ASTM E 970-96, Standard Test Method 708.3.2

for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy source

ASTM E 1300-94, Standard Practice for T.2405.3A Determining the Minimum Thickness T.2405.3B and Type of Glass Required to Resist a

Specified Load ASTM E 1399-91, Cyclic Movement and 705.7.2

Measuring the Minimum and Maximum Joint Widths of Architectural Systems

ASTM F 1667-95, Specification for 1506.5.1 Driven Fasteners: Nails, Spikes and Staples

ASTM G 23-95, Light Exposure Apparatus 1504.5 (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials

ASTM G 26-95, Light Exposure Apparatus 1504.5 (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials

ASTM G 53-95, Light and Water-Exposure 1504.5 Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials

AWPA Cl-95, All Timber Products-Preservative 1505.6.2, Treatment by Pressure Processes 1804.7,

2301.4.6 AWPA C2-95, Lumber, Timber, Bridge 1804.7,

Ties and Mine Ties-Preservative Treatment 2301.4.6 by Pressure Processes

AWPA C3-95, Piles-Preservative Treatment 1804.7, by Pressure Processes 1811.2.2,

2301.4.6 AWPA C4-95, Poles-Preservative Treatment 1804.7,

by Pressure Processes 2301.4.6 AWPA C5, Posts—Pressure Treatment 2314.4.5 AWPA C6, Crossties and Switch Ties—

Pressure Treatment AWPA C7, Incised (Red, White & Alaska 2314.4.5

Yellow Cedar) Poles Butts Thermal Treatment AWPA C8, Poles (Western Red & Alaska 2314.4.5

Yellow Cedar) Full Length Thermal Treatment

AWPA C9-95, Plywood-Preservative 1804.7, Treatment by Pressure Processes 2301.4.6

AWPA C10, Poles (Lodgepole Pine) Full 2314.4.5 Length Thermal Treatment

AWPA Cl l , Wood Blocks for Floors & 2314.4.5 Platforms Pressure Treatment

AWPA C14, Wood for Highway Construction 2314.4.5 Pressure Treatment

AWPA C15-95, Wood for Commercial- 1804.7, Residential Construction Preservative 2301.4.6 Treatment by Pressure Process

AWPA C16, Wood used on Farms— 2314.4.5 Pressure Treatment

AWPA C18-92, Standard for Pressure Treated 1804.7, Material in Marine Construction 1811.2.4,

2301.4.6 AWPA C20-88, Structural Lumber - Fire- 2301.8.2,

retardant Treatment by Pressure Process 2301.8.4 AWPA C22-93, Lumber and Plywood for 1804.7,

Permanent Wood Foundations- 2301.4.6 Preservative Treatment By Pressure Processes

AWPA C23-94, Round Poles and Posts Used 1804.7, In Building Construction-Preservative 2301.4.6 Treatment by Pressure Processes

AWPA C24-95, Sawn Timber Piles Used for 1804.7, Residential Commercial Building 1811.2.3,

2301.4.6 AWPA C25, Crossarms—Pressure Treatment 2314.4.5 AWPA C26, Crossarms—Non-Pressure 2314.4.5

Treatment AWPA C27-88, Plywood - Fire-retardant

Treatment by Pressure Process 2301.8.4 2301.8.2,


AWPA C28-95, Standard for Preservative J 804.7, Treatment of Structural Glued Laminated 2301.4.6 Members and Laminations before Gluing of Southern Pine, Pacific Coast Douglas Fir, Hemfir and Western Hemlock by Pressure Processes

AWPA C29, Lumber to be used for the 2314.4.5 Harvesting, Storage and Transportation of Food Stuffs—Pressure Treatment

AWPA C31-95, Lumber Used Out of Contact 2301.4.6 With the Ground and Continuously Protected From Liquid Water-Treatment by Pressure Processes

AWPA C33-93, Standard for Preservative 2301.4.6 Treatment of Structural Composite Lumber by Pressure Processes

AWPA C34, Shakes and Shingles- T. 1507.10.5 Preservative Treatment by Pressure Process

AWPA M4-95, Standard For the Care of 1804.7, Preservative-Treated Wood Products 1811.2.5,

2301.4.6 AWPA P1/P13-95, Standard for Coal Tar 1804.7,

Creosote for Land and Fresh Water 2301.4.6 and Marine (Coastal Water) Use

AWPA P2-95, Standard for Creosote Solutions 1804.7, 2301.4.6

AWPA P3-67, Creosote-Petroleum Oil Solution 1804.7, 2301.4.6

AWPA P5-95, Standard for Waterborne 1804.7, Preservatives 2301.4.6

AWPA P8-95, Standard for Oil-Borne 1804.7, Preservatives 2301.4.6

AWPA P9-92, Standard for Solvents and 1804.7, Formulations for Organic Preservative 2301.4.6 Systems

AWPI Pole Building Design 2301.2.5

BIA Building Code Requirements for 2103.1 Engineered Brick Masonry, 1969

CAN 4-S102.2-M83, Standard Method of Test for 708.4 Surface Burning Characteristics of Flooring, Floor Covering and Miscellaneous Materials and Assemblies

CGSB 37-GP-52M-84, Roofing and 1504.6, Waterproofing Membrane, Sheet Applied, 1508.6.2 Elastomeric

CGSB 37-GP-54M-79, Roofing and 1508.7.2 Waterproofing Membrane, Sheet Applied, Flexible, Polyvinyl Chloride

CGSB 37-GP-56M-80, Membrane, 1508.5.2 Modified, Bituminous, Prefabricated, and Reinforced for Roofing-with December 1985 Amendment

CPSC 16 CFR Part 1201, Architectural Glazing 2405.1, Materials, Federal Register 2405.5.4,

2408.2 CPSC 16 CFR Part 1209, Cellulose Insulation - 708.8

Interim Safety Standard

Reference Standards

CPSC 16 CFR Part 1404, Cellulose Insulation 708.8 CPSC 16 CFR 1500.41, Method of Testing 202

Primary Irritant Substances CPSC 16 CFR 1500.42, Test for Eye Irritants 202

CSSB Design and Application Manual for T. 1507.9.4, New Roof Construction, 1989 T. 1507.10.5

CSSB Design and Application Manual for 1403.6.3 Exterior and Interior Walls, 1989

CSSB Grading Rules for Wood Shakes and T. 1507.9.4, Shingles, 1992 T. 1507.10.5

DOT CFR 49 Part 173 202

FC & PA Guide to Concrete Masonry Residential 1606.1.1 Construction in High Wind Areas, 1997

FM Specification Tested Products Guide, 1995 701.5.2, FM 4450-90 Class 1 Insulated Steel Deck 1504.3,

Roofs - with Supplements through 2603.4, July 1992 2603.5.1.5

FM 4470-86, Class 1 Roof Coverings - 1504.3, with Supplements through August 1992 1504.6

FM 4880-72, Building Corner Fire Test 2603.5, 2603.8

FRSA/NTRMA 07320/1-98, Concrete 1507.4.4 and Clay Roof Tile Installation Manual, Second Edition

GA 216-96, Recommended Specifications 2504.4.1 for the Application and Finishing of Gypsum Board

GA-600, Fire Resistance Design Manual, 701.5.2 15th Edition 1997

ICC/ANSI Al 17.1-98, Accessible and Usable 202, Buildings, and Facilities 1016.3.4

MFMA Hard Maple Flooring Standard 2301.4.8 Specification (Hard Maple, Beech and Birch), 1969

NAAMM, Metal Grating Manual 2214.3

NIST CS236, Mat-Formed Particleboard 2314.4.6 NIST PS1, Construction and Industrial 2314.4.6

Plywood NIST PS2, Performance Standard for 2314.4.6

Wood Based Structural Use Panels NIST PS20, American Softwood Lumber 2314.4.6

Standard NIST PS56, Structural Glued Laminated 2314.4.6

Timber

NBS BMS 71, Fire Tests of Wood and Metal- 709.7 Framed Partitions, National Bureau of Standards

Reference Standards

NBS Fire Tests of Building Columns, joint 709.7 report of Underwriters Laboratories Inc.,

Associated Factory Mutual Insurance Companies and National Bureau of Standards, 1920

NBS TRBM-44, Fire-Resistance and Sound- 709.7 Insulation Ratings for Walls, Partitions and Floors, National Bureau of Standards, 1946

NCMA Design Manual for Segmental 1815.5 Retaining Walls, Second Edition, 1997

NCMA TR68-A-75, Design and Construction 1804.6.1.1 of Plain and Reinforced Concrete Masonry Basement and Foundation Walls

NCMA-TEK 5-8 (1978), Design Details for 704.5.1.3 Concrete Masonry Fire Walls

NFPA 10-98, Portable Fire Extinguishers 409.2.13.5

NFPA 13-99, Installation of Sprinkler Systems 403.2.8, 407.1.3.1, 407.1.3.4,

409.2.13.1, 409.2.13.2, 409.2.17.4,

412.10.1, 413.8, 415.3,

705.2.2, 903.2, 903.3,

903.7.4, 903.7.7, 904.2.2,

904.2.3, 904.7.3, 905.1.3,

1004.1.6.3, 1405.2,

3003.6.1 NFPA 13D-99, Sprinkler Systems, For 415.1(1)

One and Two Family Dwellings and Mobile T.500, Homes 903.7.7

NFPA 13R-99, Installation of Automatic T.500, Sprinkler Systems for Residential Buildings 903.7.6, up to and Including 4 Stories in Height 903.7.7

NFPA 14-00, Installation of Standpipe 413.9.2, and Hose Systems 904.1.1,

904.2.3, 904.4,

904.7.2 NFPA 30-96, Flammable and Combustible 408.6.1

Liquids Code NFPA 30B-98, Code for the Manufacture 308.2.1 (13)

and Storage of Aerosol Products NFPA 40-97, Storage and Handling of 403.3.1

Cellulose Nitrate Motion Picture Film NFPA 43B-93, Storage of Organic Peroxide 407.9.2

Formulations NFPA 70-99, National Electrical Code 2701.2


NFPA 72-99, National Fire Alarm Code 403.5.5.3, 409.1.7,

409.2.10.1, 409.2.11, 409.2.12,

409.2.14.6, 412.3.1, 415.5.2,

415.6, 415.7.3,

705.1.2.3.2, 705.1.2.3.3,

903.9.1, 905.1.1, 905.1.4, 905.2.1, 905.2.4,

1005.7.3, 1012.2.2

NFPA 77-93, Static Electricity 407.2.9.3 NFPA 80-95, Fire Doors and Windows 705.1.3.1,

705.1.3.3, 1012.4 (5)

NFPA 82-99, Incinerators, Waste and 409.2.17.4 Linen Handling Systems and Equipment

NFPA 99-99, Health Care Facilities 1024.1.5 NFPA 102-95, Assembly Seating, Tents and T. 1604.1,

Membrane Structures 3105.1 NFPA 204M-91, Guide for Smoke and 1004.1.6.3,

Heat Venting 1004.1.6.4, 3104.4

NFPA 231-95, General Storage 903.2, 1004.1.6.3 NFPA 231C-95, Rack Storage of 903.2,

Materials 1004.1.6.3 NFPA 252-99, Standard Methods of Fire Tests 415.4.2,

of Door Assemblies 705.1.3.2, 705.1.3.2.2

NFPA 253-00, Test for Critical Radiant Flux 803.8.2, of Floor Covering Systems Using a Radiant 803.8.3, Energy Heat Source 803.8.4

NFPA 257-00, Standard on Fire Test for 703.10, Window and Glass Block Assemblies 705.1.3.2,

705.1.3.6.3 NFPA 259-98, Test Method for Potential 2603.5.1.10,

Heat of Building Materials 2603.6.3, 3105.4.2

NFPA 265-98, Fire Tests for Evaluating 803.5.2, Room Fire Growth Contribution of 803.5.3.1 Textile Wall Coverings

NFPA 268-96, Standard Test Method for 2603.6.7 Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source

NFPA 409-95, Standard on Aircraft Hangars 411.7.7 NFPA 418-95, Standard for Heliports 411.8.2 NFPA 430-00, Storage of Liquid and Solid 407.8.2

Oxidizers NFPA 701-96, Methods of Fire Test for 3103.1,

Flame-Resistant Textiles and Films 3105.4.1.1

NFPA 704-96, Identification of the Fire 202, Hazards of Materials 407.2.5.1,

407.2.10, 407.5.8,408.7.1

NIOSH Publication No. 81-123, 407.5.3 NOFMA 1981, "Flooring Grading Rules" 2301.4.8

(Oak, Pecan, Beech, Birch, Hard Maple), 1981 NPA Particleboard: The Ideal Floor 2301.2.5,

Underlayment 2301.4.5.1

OSHA 29 CFR 1910.1000, Air Contaminants 202

PCI Design for Fire Resistance of Precast 709.2.3.1, Prestressed Concrete, 1977 T.709.2.3D

PS 1-83, Construction and Industrial Plywood 1707.3.3, 2301.4.3, 2310.4.4

PS 2-92, Wood-Based Structural-Use Panels 1707.3.3, 2301.4.3,

PTI Design and Construction of Post- 1804.3.3.3 tensioned Slabs-on-Ground, 1985

RCSC Load and Resistance Factor Design 2208, Specification for Structural Joints Using 2214.3 A325 and A490 Bolts, 1988

RCSC Specification for Structural Joints 2208, 2214.3 Using ASTM A325 or A490 Bolts, 1985

RMA RP-1-90, Minimum Requirements for 1508.6.2 Non-Reinforced Black EPDM Rubber Sheets

RMA RP-2-90, Minimum Requirements for 1508.6.2 Fabric-Reinforced Black EPDM Rubber Sheets

RMA RP-3-85, Minimum Requirements for 1508.6.2 Fabric-Reinforced Black Polychloroprene Rubber Sheets

SBCCI SSTD 10-99, Standard for Hurricane 1606.1.1 Resistant Residential Construction

SBCCI SSTD 11-99, Standard for Determining 1707.5.1, the Wind Resistance of Concrete 1707.5.2 or Clay Roof Tiles

SBCCI SSTD 12-99, Standard for Determining 1606.1.4 Impact Resistance from Windborne Debris

Florida Building Code, Building, Appendix A, 1603.1 SBCCI Standard for Expansive Soil Tests, 1986 1804.3.2 Florida Fire Prevention Code 201.3,

308.2.1, T.308.2A, T.308.2B, T.308.2C, 403.2.10,

404.4.1, 407.1.1.1, 407.1.3.1,

407.2.1, 407.2.3.5,

407.2.8, 407.3, 407.4,

407.5.1, 407.6,

407.7.1, 407.7.2, 407.8.1, 407.9.1,

T.407.9.2, 407.9.4,

407.10.2, 407.10.4, 407.11.1, 407.11.4, 407.12.1,

407.13, 407.14.1, 407.14.4, 407.15.1, 407.16.1,

408.3.8, 409.1.9, 410.2.1, 411.1.1, 503.4.1,

903.5, 903.7.3, 1405.1, 3105.1, 3601.2

Florida Building Code, Fuel Gas 101.4.4 201.3,

2801.1,2809 Florida Building Code, Mechanical 101.4.5,

201.3, 407.2.4.2, 407.14.2,

407.17.4.4, 408.3.6.1, 409.2.8.3, 413.10.2,

414.6.1, 704.1.3.3.1, 704.1.3.3.4, 705.1.2.2.1, 705.2.1.4.1,

707.1,707.2, 708.6,

1203.5, 1804.6.3.1, 1804.6.3.2,

2309.6, 2801.1,

2803, 2811

Florida Building Code, Plumbing 101.4.6, 105.6, 201.3,

1204.1, 1503.4.2, 1503.4.3,

1511.6.4.2,


Reference Standards

Organizations

1511.6.4.3, 1604.6.2

SBCCI PST & ESI Evaluation Report 202, 701.5.2, Listing Compiled July 1998

SDI, Deck Damage and Penetrations 2214.3 SDI, Diaphragm Design Manual 2214.3 SDI, LRFD Design Manual for Composite 2214.3

Beams and Girders with Steel Deck SDI, Manual of Construction with Steel Deck 2214.3 SDI, Standard Practice Details 2214.3 SDI, Steel Deck Institute Design Manual 2214.3

SJI Handling and Erection of Steel Joists 2214.3 and Joist Girders, Technical Digest No. 9

SJI Joist Girders, 1994 2205.1 SJI Longspan Steel Joists, LH-Series, and Deep 2205.1

Longspan Steel Joists, DLH-Series, 1994 SJI Open Web Steel Joists, K-Series, 1994 2205.1 SJI Standard Specifications, Load Tables 2214.3

and Weight Tables for Steel Joists and Joist Girders

SJI Structural Design of Steel Joist Roofs to 2214.3 Resist Ponding Loads, Technical Digest No. 3

SJI Structural Design of Steel Joist Roofs 2214.3 to Resist Uplift Loads, Technical Digest No. 9

SJI Vibration of Steel Joist-Concrete Slab 2214.3 Floors, Technical Digest No. 5

SJI Welding of Open Web Steel, Technical 2214.3 Digest No. 8

SJI 60-Year Steel Joist Manual 2214.3

SSPC - Paint 15, Steel Joist Shop Paint 2214.3 SSPC/AISC Guide to the Shop Painting 2214.3

of Structural Steel

Standard Practice for Bracing Masonry 2111.1.6 Walls Under Construction with Commentary, July 1999, with Addendum 1, December 18, 1999

TECO PRP-133, Performance Standards 2314.4.8 and Policies for Structural use Panels

TFS-90, Grading Rules for Preservative- T. 1507.10.5 Southern Yellow Pine Tapersawn Shakes Treated

TPI Handling, Installing and Bracing Metal 2309.2.3, Plate Connected Wood Trusses, HIB-91 2314.4.9

TPI National Design Standard for Metal 2314.4.9 Plate Connected Wood Truss Construction. (Excluding Chapter 2)

UL 9-89, Fire Tests of Window Assemblies 703.10 UL 103-89, Factory Built Chimneys 2804.4.4 UL 127-96, Factory-built Fireplaces 2804.4.5,

2806.1.2 UL 217-89, Single and Multiple Station 409.1.1.1

Smoke Detectors


UL 268-89 Smoke Detectors for Fire 409.1.1.1 Protective Signaling Systems

UL 555-96, Fire Dampers 202, 705.1.2.2.2, 705.2.1.4.2

UL 555S-96, Leakage Rated Dampers for 202 Use in Smoke Control Systems

UL 580-94, Uplift Resistance of Roof 1504.3 Assemblies - with Revisions through April 1995

UL 737-96, Fireplace Stoves 2806.2.1 UL 790-97, Fire Resistance of Roof 1505.1,

Covering Materials 2603.7 UL 1040-80, Insulated Wall Construction 2603.5,

2603.8 UL 1256-92, Fire Test of Roof Deck 2603.4,

Construction 2603.5.1.5 UL 1482-94, Room Heaters, Solid-Fuel Type 2806.2.1 UL 1715-90, Fire Test of Interior Finish 2603.5,

Material 2603.8 UL 1777-95, Chimney Liners 2113.3.8,

2113.5 UL 1897-93, Uplift Tests for Roof Covering 1504.3

Systems UL 1975-90, Fire Test for Foamed Plastics 403.2.10

Used for Decorative Purposes UL Fire Resistance Directory, 1996 701.5.2

USDOC PS 20-94, 2301.3.2, American Softwood Lumber Standard 2301.3.3,

2301.3.4, 2301.4.1

Webster's Current New Collegiate Dictionary 201.3 WPPC Guide to Wood Construction 1606.1.1

In High Wind Areas WRI/CRSI Design of Slab-On-Ground 1804.3.3.3

Foundations, August 1981

WSTI Manual of Cold Formed Welded 2214.3 Structural Steel Tube

SECTION 3503 ORGANIZATIONS

The following is a list by name and address of those agencies, associations, institutes and others that are referred to in this code by name, initials or symbols.

AA Aluminum Association 900 19th Street, N.W. Washington, DC, 20006

AAMA American Architectural Manufacturers Association

1827 Walden Office Square, Suite 550 Schamburg, IL 60173

AASHTO American Association of State Highway & Transportation Officials

444 North Capital Street Northwest Station 249 Washington, DC 20001

ACI American Concrete Institute P.O. Box 19150 Detroit, MI 48219-0150

AF&PA American Forest and Paper Association 1111 19th St. NW, Suite 800 Washington, DC 20036

AHA American Hardboard Association 520 No. Hicks Road Palatine, IL 60067-3609

AISC American Institute of Steel Construction, Inc.

One East Wacker Drive, Suite 3100 Chicago, IL 60601-2001

AISI American Iron and Steel Institute 1133 15th Street, NW, Suite 300 Washington, DC 20005-2701

AITC American Institute of Timber Construction

11818 S.E. Mill Plain Blvd., Suite 415 Vancouver, WA 98684-5092

ANSI American National Standards Institute 11 West 42nd Street, 13th Floor New York, NY 10036

APA APA-Engineered Wood Association P.O.Box 11700 Tacoma,WA98411-0700

ASHRAE American Society of Heating, Refrigeration and Air Conditioning Engineers

1791 Tullie Circle, N.E. Atlanta, GA 30329

ASCE American Society of Civil Engineers 1801 Alexander Bell Drive Reston, VA 20191-4400

ASME American Society of Mechanical Engineers

United Engineering Center 345 East 47th Street New York, NY 10017

ASTM American Society for Testing and Materials

1916 Race Street Philadelphia, PA 19103-1187


Organizations

AWPA American Wood Preservers Association

P.O. Box 5690 Granbury, TX 76049

AWPI American Wood Preservers Institute Suite 550 2150 Prosperity Avenue Fairfax, VA 22031-4312

AWS American Welding Society, Inc. 550 N.W. Lejeune Road Miami, FL 33135

BHMA Builders Hardware Manufacturers Association

355 Lexington Avenue, 17th Floor New York, NY 10017

BIA Brick Institute of America 11490 Commerce Park Drive, Suite 300 Reston, VA 22091-1506

CAN National Standards of Canada designation (The number or name following the CAN designation represents the agency under whose auspices the standard is issued.

CAN1 designates CGA, CAN2 designates CGSB, CAN3 designates CSA, and CAN4 designates ULC. 350 Sparks Street, Ottawa, Ontario K1R7S8

CGSB Canadian General Standards Board 222 Queens Street 14th Floor, Suite 1402 Ottawa, Ontario, Canada KIAIGC

CMWB Council for Masonry Wall Bracing 1910 South Highland Avenue Suite 101 Lombard, IL 60148

CPSC U.S. Consumer Product Safety Commission

5401 Westbard Ave., Room 420 Washington, DC 20207

CSSB Cedar Shake and Shingle Bureau P.O.Box 1178 Sumas,WA 98295-1178

DOT U.S. Department of Transportation Research and Special Program Administration

400 7th Street S.W. Washington, DC 20590

Organizations

FC&PA Florida Concrete and Products NCMA Association

3030 Dade Avenue Orlando, Florida 32804 NEPA

NFPA FEMA Federal Emergency Management

Agency-Region IV Mitigation Division NIOSH 3003 Chamblee Tucker Rd. Atlanta, GA 30341

FM Factory Mutual Research Corp. 1151 Boston-Providence Turnpi ke NOFM A Norwood, MA 02062-9102

FRSA Florida Roofing, Sheet Metal and Air Conditioning Contractors Association, Inc. NPA

P.O. Box 4850 Winter Park, FL 32793

FS Federal Specifications NTRMA General Services Administration,

Specification Activity Office, Bldg. 197 Washington Navy Yard 2nd & M Streets S.E. OSHA Washington, DC 20407

GA Gypsum Association 810 First St., N.E., No. 510 Washington, DC 20002

PCA HPMA Hardwood Plywood Manufacturer's Association (Also see HPVA)

P.O. Box 2789 Reston, VA 22090-2789

HPVA Hardwood Plywood & Veneer Association (Formerly HPMA)

P.O. Box 2789 Reston, VA 22090-2789

MFMA Maple Flooring Manufacturers Association

60 Revere Drive, Suite 500 Northbrook, IL 60062

NAAMM National Association of Architectural Metal Manufacturers PTI

600 South Federal Street Chicago, IL 60605

NBS National Bureau of Standards R C S C

U.S. Dept. of Commerce Superintendent of Documents Government Printing Office Washington, DC 20401


National Concrete Masonry Association 2302 Horse Pen Road Herndon, VA 22071-3406

National Fire Protection Association One Batterymarch Park Quincy, MA 02269-9101

National Institute for Occupational Safety and Health

5600 Fishers Lane Rockville, MD 20857

National Oak Flooring Manufacturers Association

Falls Building, Suite 660 22 North Front Street Memphis, TN 38173-0009

National Particleboard Association 18928 Premiere Court Gaithersburg, MD 20879-1569

National Tile Roofing Manufacturers Association, Inc.

P.O. Box 40337 Eugene, OR 97404

Occupational Safety and Health Administration

Francis Perkins Dept. of Labor Building 200 Constitution Ave., N.W. Washington, DC 20210

Portland Cement Association 5420 Old Orchard Road Skokie, IL 60077-1083

Prestressed Concrete Institute 175 West Jackson Boulevard, Suite 1859 Chicago, IL 60604-9773

Product Standards National Institute of Standards &

Technology U.S. Department of Commerce A625 Administration Gaithersburg, MD 20899

Post-Tensioning Institute 1717 West Northern Avenue, Suite 218 Phoenix, AZ 85021

Research Council on Structural Connections

c/o Stanley D. Lindsey & Assoc, Ltd. 2244 Metro Center Blvd, Suite 208 Nashville, TN 37228-1320

SBCCI PST & ESI SBCCI Public Safety Testing and Evaluation Services, Inc.

900 Montclair Road, Suite A Birmingham, AL 35213-1206

SJI Steel Joist Institute 1205 48th Ave. North, Suite A Myrtle Beach, SC 29577

SwRI Southwest Research Institute 8500 Culebra Road San Antonio, TX 78228

TFS Texas Forest Service Forest Products Laboratory P.O. Box 310 Lufkin.TX 75902-0310

TPI Truss Plate Institute 583 D'Onofrio Drive, Suite 200 Madison, WI 53719

UL Underwriters Laboratories Inc. 333 Pfingsten Road Northbrook, IL 60062-2096

USDOC U.S. Department of Commerce National Technical Information Servic 5285 Port Royal Road Springfield, VA 22161

WEBSTER'S Merriam-Webster Inc. Language Research Service P.O. Box 281 Springfield, MA 01102

WPPC Wood Products Promotion Council c/o Florida Wood Council 1300 Limit Avenue Mount Dora, FL 32758-1687

WRI Wire Reinforcement Institute, Inc. 203 Loudon Street, S.W. 2nd Floor, Suite 203C Leesburg, VA 22075

Organizations


CHAPTER 35 REFERENCE...

Documents

Transcript of CHAPTER 35 REFERENCE...