Chapter 1

ECE 1231ECE 1231ElectronicsElectronics

Dept. of Electrical and Computer EngineeringDept. of Electrical and Computer Engineering

International Islamic University MalaysiaInternational Islamic University Malaysia

Chapter 1Chapter 1Prologue to ElectronicsPrologue to Electronics

1-3

© Electronics© Electronics ECE 1231ECE 1231

Definitions

Electronics is the art and science of directing electrons or charges to do work.

Each electronic component performs a specific function such as to amplify, to filter.. etc

Connections of several electronic components in a loop form an electric circuit

1-4


Importance

We are currently living in what is known as the Information Age.

The advances that we made in the areas of Communications and Computers are largely due to ELECTRONICS!

Electronics is perhaps present everywhere around us. For example, a single individual carries several electronic gadgets such as a wrist-watch, cell-phone, PDA, laptop.. etc

1-5


Electronic SystemsElectronic Systems

● Electronic systems are composed of subsystems or functional blocks.

● These functional blocks can be categorized as follows:

Amplifiers: increase the power level of weak signals.

Filters: separate desired signals from undesired signals .

Signal Sources: generate waveforms.

Wave-Shaping Circuits: change one waveform into another.

Digital Logic Functions: process digital signals.

Power Supplies: provide necessary dc power to functional blocks.

Converters: change signals from analog form to digital or vice versa.

1-6


Electronic-System Block DiagramsElectronic-System Block Diagrams

Block diagram of a simple electronic system: an AM radio

1-7


System DesignSystem Design

● Typical flowchart for design of electronic systems

1-8


Circuit DesignCircuit Design

● Flowchart of the circuit-design process

1-9


Brief HistoryBrief History

● The development of the transistor and the integrated circuit has led to remarkable electronic capabilities.

● In December 1947First transistor was demonstrated at Bell Telephone Laboratories by William Shockley, John Bardeen and Walter Brattain.

1-10



In September 1958First integrated circuit fabricated in germanium was demonstrated at Texas Instruments by Jack Kilby.

At about the same time, Robert Noyce of Fairchild Semiconductor introduced the integrated circuit in silicon.

Integrated Circuits is a novel technology where not only active devices such as transistors can be fabricated on silicon, resistors and capacitors can be fabricated on the same substrate.

Now MANY components can be fit on the same wafer.

1-11



Integrated Circuits is a novel technology where not only active devices such as transistors can be fabricated on silicon, resistors and capacitors can be fabricated on the same substrate.

Now MANY components can be fit on the same wafer.

1-12



• The development of the IC continued at a rapid through the 1960s. Today, an IC can contain arithmetic, logic and memory functions on a single semiconductor chip.

• Microelectronics – science of manufacturing micron sized electronics

1-13


Electronic ComponentsElectronic Components

1-14


Passive Devices

CapacitorCapacitor

Resistor

1-15


Active Component : DiodeActive Component : Diode

1-16


Active Component : BJT

1-17


Electronic CircuitsElectronic Circuits

● In most electronic circuits There are two inputs. One input is from a power supply that provides dc voltages and

currents to establish the proper biasing for the transistor. The second input is a signal that can be amplified by the circuit.

The output signal can be larger than the input signal. The output power can never exceed the dc input power.

1-18


Discrete and Integrated CircuitsDiscrete and Integrated Circuits

● Discrete Circuits Circuits that contain discrete components, such as

resistor, capacitors and transistors.

● Integrated Circuits Circuits that are the building blocks of IC. For example, circuits that make up the operational

amplifier, an important IC in analog electronics. Various logic circuits used in digital ICs.

1-19


Analog and Digital SignalsAnalog and Digital Signals

● Analog Signals The magnitude of an analog

signal may have any value. The amplitude may vary

continuously with respect to time.

Electronic circuits that process such signals are called analog circuits.

● Digital Signals An alternative signal is at one of

two distinct levels and is called a digital signal.

The digital signal has discrete values, it is said to be quantized.

Electronic circuits that process digital signals are called digital circuits.

1-20


NotationNotation

A lowercase letter with an uppercase subscript indicates a total instantaneous value.

An uppercase letter with an uppercase subscript indicates a dc quantity.

A lowercase letter with a lowercase subscript indicates an instantaneous value of a time-varying signals.

An uppercase letter with a lowercase subscript indicates a phasor quantity.

1-21


NotationNotation

Chapter 1

Documents

Transcript of Chapter 1