![Laboratory Furnacesof the furnace along the heating process. Strong and Precise ... Chamber Furnaces MTP Series 950°C-1100°C ... 1400 °C 3, 6, 9, 16, 30, 60 [Liter] 1500 °C E4,](https://static.fdocuments.in/doc/165x107/5f3153ded4f4fa3102784bad/laboratory-furnaces-of-the-furnace-along-the-heating-process-strong-and-precise.jpg)
Chamber furnaces 1100 °C
4
26 FURNACES - FOURS CHAMBER FURNACES 1100°C FP 1100 Definition: Electric chamber furnace for every applications. Construction: Robust construction in bent plate. Vertical lif- ting front door. Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks. Aeration: Rear exhaust. Heating: Coil resistors on ceramic tubes. The heating is turned off at the opening of the door. Electricity: up to 30 liters, single-phase 230VAC, 50Hz. From 45 liters, 3 x 400VAC. Regulation: Axron Swiss PID temperature controller. Documentation: Certification CE and operating instructions in English. Delivered with: Removable ceramic sole. Définition: Four électrique à chambre pour toutes applications. Construction: Construction robuste en tôle pliée. Porte à dé- gagement vertical. Isolation: Isolation multicouche. Intérieur en fibre céramique et brique réfractaire. Aération: Evacuation à l’arrière du four. Chauffage: Résistances boudinées sur tubes céramiques. Ar- rêt de la chauffe lors de l’ouverture de la porte. Electrique: Jusqu’à 30 litres, tension 230VAC, fréquence 50Hz. A partir de 45 litres, tension 3x400VAC. Régulation: Régulateur PID Axron Swiss. Documentation: Certification CE, notice d’utilisation en français. Livré avec: Sole céramique amovible. MODEL ITEM CODE Int. Vol. (L) Int. Dim. (WxHxD) (mm) Ext. Dim. (WxHxD) (mm) Power (kW) Weight (kg) FP 1100-6 G14573 6.3 210 x 150 x 200 550 x 650 x 580 2.5 56 FP 1100-8 G14974 7.5 210 x 180 x 200 550 x 650 x 580 2.5 59 FP 1100-10 G14975 10 200 x 200 x 250 560 x 720 x 670 3.7 62 FP 1100-15 G14976 15 220 x 230 x 300 560 x 720 x 670 4.7 69 FP 1100-30 G14977 28 280 x 280 x 380 600 x 780 x 750 4.7 80 FP 1100-45 G14978 45 300 x 300 x 500 660 x 770 x 720 7 99 photos for illustration only 206 Specifications subject to change Borel Swiss SA - A Division of SOLO Swiss Group Rouges-Terres 61 - 2068 Hauterive - Switzerland - [email protected] - www.borel.eu - Tel. +41 32 756 64 00 - Fax +41 32 756 64 48
-
Upload
borel-swiss-ag -
Category
Technology
-
view
102 -
download
1
description
Transcript of Chamber furnaces 1100 °C
26
FURNACES - FOURS
CHAMBER FURNACES 1100°CFP 1100
Definition: Electric chamber furnace for every applications.Construction: Robust construction in bent plate. Vertical lif-ting front door.Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks.Aeration: Rear exhaust.Heating: Coil resistors on ceramic tubes. The heating is turned off at the opening of the door.Electricity: up to 30 liters, single-phase 230VAC, 50Hz. From 45 liters, 3 x 400VAC.Regulation: Axron Swiss PID temperature controller.Documentation: Certification CE and operating instructions in English.Delivered with: Removable ceramic sole.
Définition: Four électrique à chambre pour toutes applications.Construction: Construction robuste en tôle pliée. Porte à dé-gagement vertical.Isolation: Isolation multicouche. Intérieur en fibre céramique et brique réfractaire.Aération: Evacuation à l’arrière du four.Chauffage: Résistances boudinées sur tubes céramiques. Ar-rêt de la chauffe lors de l’ouverture de la porte.Electrique: Jusqu’à 30 litres, tension 230VAC, fréquence 50Hz. A partir de 45 litres, tension 3x400VAC.Régulation: Régulateur PID Axron Swiss.Documentation: Certification CE, notice d’utilisation en français.Livré avec: Sole céramique amovible.
MODEL ITEM CODE Int. Vol. (L)
Int. Dim. (WxHxD) (mm)
Ext. Dim. (WxHxD) (mm)
Power (kW)
Weight (kg)
FP 1100-6 G14573 6.3 210 x 150 x 200 550 x 650 x 580 2.5 56
FP 1100-8 G14974 7.5 210 x 180 x 200 550 x 650 x 580 2.5 59
FP 1100-10 G14975 10 200 x 200 x 250 560 x 720 x 670 3.7 62
FP 1100-15 G14976 15 220 x 230 x 300 560 x 720 x 670 4.7 69
FP 1100-30 G14977 28 280 x 280 x 380 600 x 780 x 750 4.7 80
FP 1100-45 G14978 45 300 x 300 x 500 660 x 770 x 720 7 99
photos for illustration only
206
Specifications subject to change
Borel Swiss SA - A Division of SOLO Swiss GroupRouges-Terres 61 - 2068 Hauterive - Switzerland - [email protected] - www.borel.eu - Tel. +41 32 756 64 00 - Fax +41 32 756 64 48
26
FURNACES - STANDARDÖFEN
CHAMBER FURNACES 1100°CFP 1100
Definition: Electric chamber furnace for every applications.Construction: Robust construction in bent plate. Vertical lif-ting front door.Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks.Aeration: Rear exhaust.Heating: Coil resistors on ceramic tubes. The heating is turned off at the opening of the door.Electricity: up to 30 liters, single-phase 230VAC, 50Hz. From 45 liters, 3 x 400VAC.Regulation: Axron Swiss PID temperature controller.Documentation: Certification CE and operating instructions in English.Delivered with: Removable ceramic sole.
Definition: Elektrokammerofen für alle Anwendungen.Konstruktion: Konstruktion aus Falzblechen. Vertikal-Türe.Isolierung: Mehrschichtenisolierung. Feuerfeste Keramik-Isolierung.Belüftung: Ableitung auf Rückseite des Ofens.Heizung: Extrudierte Widerstände auf Keramikrohren. Ausschalten der Heizung beim Öffnen der Tür.Elektrisch: Bis zu 30 Liter : Spannung 230VAC, Frequenz 50Hz. Ab 45 Liter : Spannung 3 x 400VAC.Regulierung: Axron Swiss PID-Regler. Dokumentation: CE-Zertifizierung und Bedienungsanleitung in Deutsch.Geliefert mit: Herausnehmbarem Keramikboden.
MODEL ITEM CODE Int. Vol. (L)
Int. Dim. (WxHxD) (mm)
Ext. Dim. (WxHxD) (mm)
Power (kW)
Weight (kg)
FP 1100-6 G14573 6.3 210 x 150 x 200 550 x 650 x 580 2.5 56
FP 1100-8 G14974 7.5 210 x 180 x 200 550 x 650 x 580 2.5 59
FP 1100-10 G14975 10 200 x 200 x 250 560 x 720 x 670 3.7 62
FP 1100-15 G14976 15 220 x 230 x 300 560 x 720 x 670 4.7 69
FP 1100-30 G14977 28 280 x 280 x 380 590 x 790 x 700 4.7 80
FP 1100-45 G14978 45 300 x 300 x 500 660 x 770 x 720 7 99
photos for illustration only
206
Specifications subject to change
Borel Swiss SA - A Division of SOLO Swiss GroupRouges-Terres 61 - 2068 Hauterive - Switzerland - [email protected] - www.borel.eu - Tel. +41 32 756 64 00 - Fax +41 32 756 64 48
26
FURNACES - HORNOS
CHAMBER FURNACES 1100°CFP 1100
Definition: Electric chamber furnace for every applications.Construction: Robust construction in bent plate. Vertical lif-ting front door.Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks.Aeration: Rear exhaust.Heating: Coil resistors on ceramic tubes. The heating is turned off at the opening of the door.Electricity: up to 30 liters, single-phase 230VAC, 50Hz. From 45 liters, 3 x 400VAC.Regulation: Axron Swiss PID temperature controller.Documentation: Certification CE and operating instructions in English.Delivered with: Removable ceramic sole.
Definición: Horno de cámara eléctrico para todas las aplicaciones.Construcción:: Construcción robusta en chapa plegada. Puerta de extracción vertical. Aislamiento: Aislamiento multicapa. Interior en fibra cerámica y ladrillo refractario.Aireación: Evacuación por la parte trasera del horno.Calefacción: Resistencias embutidas sobre tubos cerámicos. Interrupción de la calefacción con la abertura de la puerta.Eléctrico: Hasta 30 litros, tensión 230VAC, frecuencia 50Hz. A partir de 45 litros, tensión 3x400VAC.Regulación: Regulador PID Axron Swiss.Documentación: Certificación CE, manual de uso.Incorpora: Solera cerámica extraíble.
MODEL ITEM CODE Int. Vol. (L)
Int. Dim. (WxHxD) (mm)
Ext. Dim. (WxHxD) (mm)
Power (kW)
Weight (kg)
FP 1100-6 G14573 6.3 210 x 150 x 200 550 x 650 x 580 2.5 56
FP 1100-8 G14974 7.5 210 x 180 x 200 550 x 650 x 580 2.5 59
FP 1100-10 G14975 10 200 x 200 x 250 560 x 720 x 670 3.7 62
FP 1100-15 G14976 15 220 x 230 x 300 560 x 720 x 670 4.7 69
FP 1100-30 G14977 28 280 x 280 x 380 600 x 780 x 750 4.7 80
FP 1100-45 G14978 45 300 x 300 x 500 660 x 770 x 720 7 99
photos for illustration only
206
Specifications subject to change
Borel Swiss SA - A Division of SOLO Swiss GroupRouges-Terres 61 - 2068 Hauterive - Switzerland - [email protected] - www.borel.eu - Tel. +41 32 756 64 00 - Fax +41 32 756 64 48
26
FURNACES - FORNI
CHAMBER FURNACES 1100°CFP 1100
Definition: Electric chamber furnace for every applications.Construction: Robust construction in bent plate. Vertical lif-ting front door.Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks.Aeration: Rear exhaust.Heating: Coil resistors on ceramic tubes. The heating is turned off at the opening of the door.Electricity: up to 30 liters, single-phase 230VAC, 50Hz. From 45 liters, 3 x 400VAC.Regulation: Axron Swiss PID temperature controller.Documentation: Certification CE and operating instructions in English.Delivered with: Removable ceramic sole.
Definizione: Forno elettrico a camera per tutte le applicazioni. Struttura: Costruzione robusta in lamiera piegata. Porta a rilascio verticale. Isolamento: Isolamento multistrato. Interno in fibre ceramiche e mattoni refrattari.Aerazione: Scarico sulla parte posteriore del forno.Riscaldamento: Resistenze a fascia su tubi in ceramica. Interruzione del riscaldamento all'apertura della porta.Parte elettrica: Tensione CA 3 x 400V, frequenza 50 Hz.Regolazione: Regolatore PID Axron Swiss.Documenti: Certificazione CE, istruzioni per l'uso.Venduto con: Fondo amovibile in ceramica.
MODEL ITEM CODE Int. Vol. (L)
Int. Dim. (WxHxD) (mm)
Ext. Dim. (WxHxD) (mm)
Power (kW)
Weight (kg)
FP 1100-6 G14573 6.3 210 x 150 x 200 550 x 650 x 580 2.5 56
FP 1100-8 G14974 7.5 210 x 180 x 200 550 x 650 x 580 2.5 59
FP 1100-10 G14975 10 200 x 200 x 250 560 x 720 x 670 3.7 62
FP 1100-15 G14976 15 220 x 230 x 300 560 x 720 x 670 4.7 69
FP 1100-30 G14977 28 280 x 280 x 380 600 x 780 x 750 4.7 80
FP 1100-45 G14978 45 300 x 300 x 500 660 x 770 x 720 7 99
photos for illustration only
206
Specifications subject to change
Borel Swiss SA - A Division of SOLO Swiss GroupRouges-Terres 61 - 2068 Hauterive - Switzerland - [email protected] - www.borel.eu - Tel. +41 32 756 64 00 - Fax +41 32 756 64 48
