Challenges in determination the Moisturecontent of woody biomass
description
Transcript of Challenges in determination the Moisturecontent of woody biomass
Moisture Measurement
1
Challenges in determination the Moisturecontent of woody biomass
Moisture Measurement
2
Company profile
INADCO Moisture Measurement develops and produces measuring equipment for inline and online measuring in processes with fine and coarse bulk solids.
Our specialty is the measurement of the moisture content of those bulk solids with our own unique technology, which eliminates the need the use of numerous calibration lines for each change in the product. Further we have equipment for the determination of the bulk density during the process and the weighing of product streams with a low bulk density (60 g/l – 1500 g/l) with a Beltweigher.
Because we are the developer and the manufacturer of our equipment we can, if necessary, adapt the our equipment to suit your process circumstances.
Our moisture meters achieve a very high reproducibility and accuracy which is better than any other system in the measurement in inhomogeneous bulk solids. The measuring range goes from 0,1 percent up to 60 percent.
With years of experience from a wide variety of industries and started in the potting soil industry, INADCO is now more expanding to other industries based on their experience with many products like biomass, animal feed, sand and clay, seeds, salt, glass powder and more.
Moisture Measurement
3
Facilities
Head office
Includes an office space, laboratory, development department and a production and testing area
Assembly and test area
Each unit undergoes an endurance test before leaving the factory
Development
Basically every system we create is with SIEMENS equipment and will be drawn 3D
Moisture Measurement
4
Core business of INADCO
Measuring the physical properties of Bulkmedia like woodchips, straw, miscanthus.
- Bulkdensity
- Mass
- Volume
- Moisturecontent
Moisture Measurement
5
Measuring during process
Moisture = ???? %
Moisture Measurement
6
Most known methods of measuring moisture
Drying StoveMicrowave
Capacitive Near Infra Red
Moisture Measurement
7
Inline Sensors
Benefits:
- Contactless- Fast- More properties
Disadvantages:
- Measures only surfaces- Sensitive for environments- Expensive
MicrowaveCapacitive
Benefits:
- Simple- Easy to handle- Low cost
Benefits:
- Simple- Easy to integrate- Reasonable price
Disadvantages:- Inaccurate
- Not usable in product with a lot of air inclusions- Not usable in product with hard particles
Disadvantages:- Small surface
- Not usable in product with a lot of air inclusions - Not usable in product with changing bulkdensìty
Price range:
€ 500,00 - € 1.000,00
Price range:
€ 3.500,00 - € 6.500,00
Price range:
€ 12.000,00 - € 30.000,00
Near Infra Red
Moisture Measurement
8
Quality of measurement with different technologies
Moisture Measurement
9
Influence of Bulkdensity with High Frequency methods
sensor sensor
Higher compression = more moisture particles per volume
Moisture Measurement
Weight
50.11 kg
Weight
49.88 kg
Why?
* The real weight of
this person is 75 kg
How accurate is this scale?
Is this a reliable weighing scale?
* 0.23 kg ?
* NO !!!
Conclusion
Two digits behind the decimal point does not always mean that the value is true
10
Reliability of the measurement data
The same person is measured twice
Moisture Measurement
Moisturecontent???
Result: Moisturecontent = 45%
Drying at 103 °C for 24h(EN14774-1:2009)
Could be!
Conclusion
There are more extractables in wood than just water which will vaporize at 103 °C like oils and resins. The real amount of water is thus <45%.1 day in a drum of petrol
The wooden block was pretreated
11
Reference measurement. With the drying stove?
Moisture Measurement
STEM BRANCH
12
Reliability of the measurement
Moisture Measurement
3 days drying at 60 °C Temperature at 110 °C
+ 2.2%Moisture [%]
Temperature [°C]
13
Evaporation of water and …..
Moisture Measurement
14
Sample deviation against average from a Drying-stove
Moisture Measurement
15
The INADCO Method
The measuring electrode in the wall of the measuring cylinder measure a large thick shell of
product on the inner side of the cylinder
Moisture Measurement
16
The INADCO Method in action
This video can be seen at: www.inadco.nl/taal/nederlands/video.htm
Moisture Measurement
17
Other measuring-layouts
Measuring in a funnel Measuring through a belt
Moisture Measurement
18
Validation
Moisture Measurement
19
Thank you for your interest and attention.
For any questions or comments you can always contact us.
INADCOMeerheide 18
5521 DZ Eersel The NetherlandsPhone: +31 (0) 497-517291
Fax: +31 (0) 497-517469E-mail: [email protected]
Web: www.inadco.nl