CHALLENGE PRODUCTS - Challenge Machinery · CHALLENGE PRODUCTS CUTTING DRILLING FOLDING CORNERING...

CHALLENGE PRODUCTS

C U T T I N G

D R I L L I N G

F O L D I N G

C O R N E R I N G

J O G G I N G

H A N D L I N G

PA D D I N G

A Heritage Spanning Three Centuries

www.ChallengeMachinery.com2005

T R I M M I N G

30704 Challenge cover 1/10/05 3:43 PM Page 2

© 2005 The Challenge Machinery Company. Litho in U.S.A.ADV-022/0105/750/CSP/22895 Printed on recycled paper.

The Challenge Machinery Company6125 Norton Center Drive

Norton Shores, MI49441-6081 U.S.A.

Phone: 231-799-8484Parts Fax: 231-798-2475Main Fax: 231-798-1275

www.ChallengeMachinery.com

30704 Challenge cover 1/10/05 3:43 PM Page 1

Prices Effective December 6, 2004 1

• InformationGeneral ...................................................................................... 1-7

• Paper CuttersSpartan 150M ............................................................................... 8Spartan 150SA .............................................................................. 9Titan 200M (manual backgauge) ............................................ 10-11Titan 200 (programmable backgauge) .................................... 12-13Titan 265 ................................................................................ 14-15Champion 305 X .................................................................... 16-17Champion 305 XD, XG, & XT ................................................. 18-20Champion 370 XG &XT .......................................................... 22-23Cutter Knives & Accessories .................................................. 24-25

• FoldersMedalist 870 ........................................................................... 26-27

• Paper DrillsJO .......................................................................................... 28-29JF ........................................................................................... 30-31EH-3C .................................................................................... 32-33MS-5 ...................................................................................... 34-35MS-10A .................................................................................. 36-38Drill Bit Sharpeners & Drill Accessories ................................. 39-40

• Bindery EquipmentPak-Rak Stock Truck ................................................................... 41Paddy Wagon Padding Press ...................................................... 42Joggers .................................................................................. 43-45

• Specialty MachinesCMT 330 Automated Three-Knife Trimmer ............................. 46-49Single Cornering Machines .................................................... 50-51PowerLift ..................................................................................... 52

• Distribution and Service AddressThe Challenge Machinery Company6125 Norton Center DriveNorton Shores, MI 49441-6081 U.S.A.Telephone: 231-799-8484; Facsimile: 231-798-1275

• Remittance AddressThe Challenge Machinery Company5117 Paysphere CircleChicago, IL 60674 U.S.A.

• Office Hours (Eastern Time)8:00 A.M. - 5:00 P.M. Monday through Friday

INDEX

© 2004-2005 The Challenge Machinery Company. All rights reserved.® Challenge, Champion, Titan, Spartan, Paddy Wagon, and Pak-Rak, areregistered trademarks of The Challenge Machinery Company.

NOTE: Product availability is subject to the terms andconditions of Dealer Agreement.

Challenge reserves the right to make changes to anyproduct, specification, or price without notice andwithout incurring responsibility to existing units.

2 Prices Effective December 6, 2004

GENERALINFORMATION

Equipment WarrantyChallenge equipment is guaranteed to be free of defects in work-manship or material for a period of three years, two years, one year,or ninety days from the date of installation (except consumables suchas, but not limited to, knives, cutting sticks, drill blocks, drill bits, glass,fold rollers, belts, etc.) according to the following schedule:

Three years Multiple-spindle paper drills

Two years Champion series paper cuttersTitan series programmable paper cuttersMedalist paper folders

One year Spartan CuttersTitan 200MSingle-spindle paper drillsCMT 330 three-knife trimmerSingle Cornering MachinesPowerLift

Ninety days Pak-Rak stock truckPaddy Wagon padding pressJoggersHandy-Sharp

IMPORTANT NOTE: Complete warranty information MUST be filed

with Challenge for any warranty to be in effect.

Adding an aftermarket computer control or any alterations to aChallenge cutter voids any remaining warranty.

Challenge will repair or replace, at our option, any equipment coveredby the foregoing warranty and proving defective during the warrantyperiod, not caused by accident, misuse or improper maintenance, ifreturned to our factory transportation charges prepaid. Failure toperform proper maintenance as detailed in the Operators Manualmay void the warranty. If you believe you have a warranty claim,contact Challenge for return authorization. Challenge will not beresponsible for any charges incurred without its' specific authorization.

Orders for warranty parts will be shipped freight prepaid via groundservice at Challenge's expense. Charges for priority shipments (nextday air, etc.) will be split between Challenge and the dealer.

The Challenge warranty does not include the cost of any laborincurred or performed by Challenge, the dealer, or other third partyto replace defective components.

THE WARRANTIES STATED HEREIN ARE IN LIEU OF ALL OTHERWARRANTIES, EXPRESS, IMPLIED, STATUTORY, OROTHERWISE. CHALLENGE MAKES NO WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE.

THE REMEDIES PROVIDED UNDER THIS WARRANTY FOR ANYDEFECT IN WORKMANSHIP OR MATERIAL OF THE PRODUCTARE THE SOLE AND EXCLUSIVE REMEDY OF THE DEALER ORANY CUSTOMER, AND CHALLENGE SHALL HAVE NO LIABILITYTO THE DEALER OR ANY CUSTOMER FOR CONSEQUENTIALDAMAGES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO,LOST PROFITS OR OTHER ECONOMIC INJURY, DUE TODEFECTS IN WORKMANSHIP OR MATERIAL OF THE PRODUCT.


GENERALINFORMATION

Price/Terms Information• PricesThese price pages apply to Challenge Authorized Dealers only, basedupon the terms and conditions of the Dealer Agreement and aresuggested selling prices. Challenge reserves the right to change allprices without prior notice and without incurring responsibility forexisting units. An appropriate Dealer Discount Schedule is providedaccording to your dealer classification.

• Terms of SaleGoods and Services are available to all qualified dealers inaccordance with the appropriate credit terms in effect at that time.Challenge reserves the right to quote directly on all bids issued bygovernmental agencies.

• Domestic Credit TermsA customer's credit privilege will be automaticallysuspended should their account become 60 days or morepast due and will not be reinstated until the delinquencyis cleared.

• Machine and Parts Orders: 1%/15 Days - Net 30, subject tochange upon written notice from Challenge.

• Invoices are payable in U.S. funds, drawn on a U.S. bank only.• MasterCard and Visa are accepted. No discount allowed.• C.O.D. (at CMC request). No Discount. No Drop Shipments.• C.O.D. certified check will be required for dealers that have

had N.S.F. checks.• $20.00 (Twenty dollars) banking fee for returned checks.

• Cash discounts offered in conjunction with the Terms of Sale areintended solely as an incentive to our customers to pay The ChallengeMachinery Company on a timely basis. Such discounts will beadministered by the Credit Department within the following guidelines:

A) Envelope must be postmarked on or before the discountdate (currently 15 days past the invoice date).

B) Customers' account must be current to qualify for the cashdiscount. A customers' account shall not be consideredcurrent if any of the following exist; (1) If there is a balanceover 60 days old. (2) If there is an outstanding balanceon a note taken to cure a prior delinquency. (3) If thereexists an unrecovered balance that has been referred toan outside Collection Agency. (4) If there is anunrecovered balance owing on a prior bad debt write-off.

C) To qualify for the cash discount on dated billings, theentire invoice amount must be paid on or before thediscount date; that is, no partial payments allowed.

D) Cash discount is not available on C.O.D. shipments.E) Cash discount is not available on orders paid prior to

Shipment unless specifically authorized by the CreditDepartment.

All invoices not paid within the discount terms are Net Thirty- (30)Days from date of invoice.

Challenge reserves the right to add late charges to any past dueaccount. Charges will not exceed 2% of any amount past due inexcess of $50.00. Minimum charges will be assessed on thosebalances under $50.00 past due.


GENERALINFORMATION

• Tax Exempt CertificateDomestic dealers must provide a current tax exemption certificate.If Challenge does not have one on file, sales tax will be charged oneach invoice until one is received. Any invoice over 60 days that hasbeen short paid by the sales tax amount will cause the customersaccount to be suspended.

• International DealersGoods and Services are available to all qualified dealers inaccordance with the appropriate credit terms in effect at that time.Acceptable means of payment include letter of credit, prepaymentand open terms to approved dealers. Wire transfers may be sent toStandard Federal Bank, 2600 W. Big Beaver Road, Troy, MI 48084USA. Routing #072000805, Acct. #1054529905, Swift #MICHUS33.Pro-Forma Invoices are available upon your request.

• Floor Plan TermsChallenge will provide, at its discretion, floor plan programs throughrecognized national financing companies, i.e. Textron FinancialCorporation. Dealers will, upon appropriate credit approval of thefinancing company, be entitled to have machines for demonstrationand inventory at his selling location. Most financing companiesrequire minimum two years financial information and completed creditapplication prior to approval. These floor plan arrangements couldentitle the dealer to have this equipment for period of 180 days withoutcost, depending on the program Challenge offers. The purpose of aFloor Plan program is an incentive for a dealer to have equipment athis selling location to provide for maximum selling exposure ofChallenge manufactured and distributed products. Annual financerates and re-payment matters will vary among financing companiesdepending on the program being utilized. Please note: You mustinform us at the time your order is placed if you will be using afinancing company. After an order has been shipped, we canno longer provide this service.

• Repair PartsPrices on Repair Parts for Challenge equipment are available uponrequest.

• Phone OrdersOrders placed for parts and/or equipment by telephone MUST befollowed by a written confirming order. Challenge will not beresponsible for parts and/or equipment furnished incorrectly if aconfirming order is not supplied.

Challenge will make every reasonable effort to process priority ordersreceived at our offices prior to 4:15 PM (ET), so long as the accountis in current status with Credit Department. Challenge reserves theright to deny premium charges if shipment was delayed through nofault of its own.

• Cancellation of Machine OrdersValid purchase orders that have been entered into the Challengeproduction schedule and then canceled later will be assessed a 2%cancellation penalty.


GENERALINFORMATION

Shipping Information• Freight DiscountTraffic policy regarding outbound freight shipments: terms of saleare F.O.B. Norton Shores, MI, or as otherwise stated. All shipmentswill be prepaid except as otherwise requested at the time the orderis placed.

Challenge has negotiated a rate reduction package through twocommon carriers. We share the majority of this reduction with ourdealers.

Exception to the freight discount include, but are not limited to,minimum charge freight bills, some Canadian shipments, internationalshipments, shipments from points other than Norton Shores, MI, andshipments to direct points not served by the carrier.

Challenge has also negotiated an agreement with several air freightcompanies for products approximately 100 pounds or less. Most ofthese air shipments can be made for the same freight charges orless than those by truck. If you receive a shipment by air, Challengehas determined it to be the lowest freight cost available.

• PackingThe prices include standard commercial packing. For export packing,fax, write, or call for prices. All orders include a handling fee of $10.00in addition to the shipping cost. Please note: The $10.00 handlingfee can not be billed to your UPS or Federal Express account. Itwill be billed with the parts on your invoice.

• Shipping WeightsApproximate shipping weights for each machine are listed under"Specifications".

• DeliveryArrangement for sidewalk or inside delivery is the dealer'sresponsibility. The dealer also must advise Challenge of the carriercontact and phone number. Challenge can specify on the waybill,but cannot guarantee, that the delivery carrier will have the necessaryequipment. Any extra charges, such as storage and redeliverycharges, are the responsibility of the dealer.

• Claims & CreditsTHE RESPONSIBILITY FOR THE SAFE ARRIVAL OF YOURMERCHANDISE IS TRANSFERRED TO THE CARRIER UPONPICKUP AT CHALLENGE. ALL SHIPMENTS SHOULD BEINSPECTED UPON ARRIVAL AND CLAIMS FOR DAMAGES ORSHORTAGES MUST BE REPORTED TO THE CARRIER BEFORESIGNING RECEIPT DOCUMENTS. ALL OF OUR MACHINERY ISSENT OUT WITH A LABEL EXPLAINING WHAT TO DO IF THECARTON IS DAMAGED. THE RESPONSIBILITY FOR FILINGFREIGHT CLAIMS RESTS WITH THE RECEIVER OF THE GOODS.


GENERALINFORMATION

ReturnsClaims for incorrect or missing items must be made to Challengewithin 15 days from the date of shipment for invoice adjustmentconsideration. Freight damaged orders must be filed with theappropriate carrier immediately upon receipt of goods. If damagedmachines need to be returned, they should be shipped back by thesame carrier that made the original delivery.

Machine ReturnsTo be considered for credit, any machine with a serial numbermust receive a numbered and approved Return Authorizationform issued by authorized Challenge Machinery personnel only.This form must accompany any returned shipment. All machinesare subject to inspection prior to credit being issued. Allauthorized return shipments must be shipped on a pre-paidbasis. Any collect shipments received, unless authorized in

writing prior to shipment, may be refused at Challenge's request.

Parts ReturnsTo be considered for credit, parts (items without serial numbers)MUST be accompanied with the Challenge Parts Return AuthorizationForm. This form can be obtained from Challenge and may bereproduced as necessary. Return authorization numbers are onlyrequired for machines.

Returned merchandise, parts or machines, that were correctlysupplied according to the customer order, will be subject to a handlingcharge to cover the cost of inspecting and repacking. This chargewill be 15% if returned within 45 days from date of shipment; 30% ifreturned between 46 and 90 days of shipment. No credit will begiven if returned more than 91 days from date of shipment. If anyreconditioning is necessary, the net cost of such work will be deductedfrom the credit issued.

Returned merchandise that was ordered as a warranty claim, mustbe returned within 45 days of shipment in order to receive full credit(if appropriate); if returned between 46 and 90 days of shipment, a15% handling charge will be applied; if returned more than 91 daysafter shipment, the amount of credit will be determined by Challenge'sability to return purchased components to it's supplier.

All returned merchandise must be shipped freight charges prepaid(no freight discounts on returned machines). At Challenge'sdiscretion, freight credits will be limited to ground rates only. Allparts must be returned in "as new" condition or credit will bedenied.

Please note: Parts "special ordered" for discontinued machinescannot be returned for credit.

Electrical EquipmentSpecial electrical wiring to meet local codes is the responsibility ofthe purchaser.


Marketing SupportLiterature ..................................................................... No ChargePlease keep your files up-to-date with our latest product literature.We reserve the right to limit quantities.

Catalogs: Full Line ADV-109Pocket Price Pages ADV-022

Cutters: Champion Series ADV-006Titan 200 & 265 ADV-030Titan 200M ADV-031Spartan 150 Series ADV-000

Folders: Medalist ADV-037Drills: MS-10A ADV-012

MS-5 ADV-060EH-3C ADV-013JO/JF ADV-014

Bindery: Joggers ADV-019Paddy Wagon ADV-020Pak-Rak ADV-046Handy-Jog ADV-032

Specialty: CMT 330 ADV-010Cornering Machines ADV-011PowerLift ADV-002

Website ChallengeMachinery.comMarketing information available for downloading includes:

• Literature • Catalog supply items• Product images • Commonly requested parts• Parts pricing • Price pages• Specifications • Selling information• Comparisons • and more• Policies

PricingThe Price Pages and Pocket Guides ADV-22 contain productinformation and suggested selling prices.

The Challenge Machinery Company reserves the right to charge forlarge quantities of sales support material.

Cutter Safety & You Video ........................... $15.00/eachSafety oriented and designed to increase operator awareness ofpotential paper cutter hazards. It is not a substitute for on-sitetraining. 15 minutes.

Invoice Stuffers ............................................... No chargeCall the Challenge Marketing Services Department to discussavailable equipment pieces.

Challenge Authorized Dealer Banner ........ $15.00/each

Selling Information Binders ........................ $15.00/eachContains samples of all literature and dividers in a 1" three ringedbinder. Order with or without price pages. All of this information ison the dealer login section of www.challengemachinery.com.

AdvertisingAssistance..............................................CallNeed ad copy, ad film, or photos? Let us help.

GENERALINFORMATION


SPARTAN 150MPAPER CUTTER

FEATURES:

Manual cuttingManual hand-wheel clampingHand-crank backgauge adjustmentFront digital display in both inches and millimetersBright Laser Red LED cut line lightHeavy-duty steel construction

Included: One Knife, One Plastic Cutting Stick, Jogging Aid & ToolKit

ACCESSORIES

Stand #61070 $195.00

Knives #60011 $99.00 Inlaid High Carbon, High Chrome Steel High-Speed Steel #60011-1 $162.00

Plastic Cutting Sticks #60057 $12.00 (Package of Twelve)

Jogging Aid #60058 $8.00

List

Spartan 150M Cutter $1,795.00

SPECIFICATIONS

Cutting Width 15-3/4"/40 cm

Backgauge Control Manual

Clamp Opening 1-1/2"/3.8 cm

Minimum Cut 1-15/16"/4.9 cm

Table In Front of Knife 6-1/4"/15.9 cm

Behind Knife 15-1/4"/38.7 cm

Pile Height 1-1/2"/3.8 cm

Overall Width 28-1/8"/71.4 cm

Overall Length 27-1/4"/69.2 cm

Overall Height 12-1/2"/31.8 cm

Net Weight (approx.) 80 lbs/36 kg

Shipping Weight (approx.) 110 lbs/50 kg

Shipping Weight with Stand 170 lbs/77 kg


SPARTAN 150SAPAPER CUTTER

FEATURES:

Electric power cuttingManual hand-wheel clampingHand-crank backgauge adjustmentFront table digital display in both inches and millimetersBright Laser Red LED cut line lightUHMW adjustable gibs (no lubrication required)Heavy-duty steel contstuctionAuto-releasing front safety shieldDual cut buttons with 1/2 second timed safety controlGuarded knife lifters

Included: One Knife, One Plastic Cutting Stick, Jogging Aid & ToolKit

ACCESSORIES

Stand #60065 $225.00

Knives #60011 $99.00 Inlaid High Carbon, High Chrome Steel High-Speed Steel #60011-1 $162.00


Jogging Aid #60058 $8.00

List

Spartan 150SA Cutter $3,595.00

SPECIFICATIONS

Cutting Width 15-3/4"/40 cm



Minimum Cut 1-15/16"/4.9 cm

Table In Front of Knife 9"/22.9 cm

Behind Knife 15-1/4"/38.7 cm

Pile Height 1-1/2"/3.8 cm

Overall Width 25-3/4"/65.4 cm

Overall Length 31"/78.7 cm

Overall Height 21-1/2"/54.6 cm



Shipping Weight with Stand 250 lbs/113 kg

ELECTRICAL:

Standard: 1/2 H.P., Single-Phase, 60 Hz, 120 Volt, AC

Power cord included


TITAN 200MPAPER CUTTER

FEATURES:

20"/51 cm Cutting Width3-1/4"/8 cm Clamp OpeningLED Digital Backgauge Position IndicatorCut Control is Plexiglas Shield with Two-Hand Cut ButtonsHydraulic Cutting & ClampingLocking Manual BackgaugeLine Light Cut Position IndicatorHydraulic Motor Runs Only During Cutting CycleHeavy Duty Casters For PortabilityPlexiglas Safety Shield Over Rear TableSteel & Cast Iron Construction

Included: One Inlaid Carbon Alloy Tool Steel Knife, Three PlasticCutting Sticks, Jogging Aid, Manual, & Tool Kit.

OPTIONS List

Side Tables 12" x 19" #K-44103 $385.00 (With Plexiglas Shield Only)

Line Light Cut Position IndicatorField Installation #K-3029 $300.00

Knocked-Down $500.00

Independent Mechanical Foot Pedal ClampingFactory Installation #20-0-101H $375.00Field Installation #K-43500 $475.00

208/230 Volt Motor Option #20-0-017M $350.00

Light Beam Safety Option #20-0-106M $1,550.0

ACCESSORIES

Knives Inlaid Carbon Alloy Tool Steel #A-10034 $109.00 Inlaid High Speed Steel #A-10034-1 $269.00

False Clamp Plate #AA-10061 $225.00

Magnetic Clamp Pads #50082 $32.00 (Package of Two - 3" x 15" each)


List

Titan 200M Cutter $9,250.00


ELECTRICAL: UL/CUL LISTED & CE

Standard: 3/4 H.P., Single-Phase, AC, 60 Hz, 120 volts, 12 Amps,

Service size 15 Amps.

Power cord included.

Requires Receptacle Type: NEMA 5-15R.

Optional: 1-1/2 H.P., Single-Phase, AC, 60 Hz, 208/230 volts, 12

Amps, Service size 15 Amps.

Power cord included.

Requires Receptacle Type: NEMA 6-15R or 6-20R.

ACCESSORIES (continued) List

Book Guides

(Priced per each) #5-7-M361 $26.00

Jogging Aid #A-12608-2 $40.00

Rykon 100 Hydraulic Oil (capacity 1 gallon)

(Five Gallon Container) #S-1991-4 $95.00

Waste Wagon #41058 $128.00

(Shipping weight 24 lbs)

SPECIFICATIONS

Cutting Width 20"/50.8 cm



Clamping Force minimum 1,250 lbs/563 daN

maximum 2,500 lbs/1,125 daN

Min Cut - w/o False Clamp Plate 1/2"/1.3 cm

Min Cut - w/ False Clamp Plate 1-7/8"/4.8 cm

Maximum Cut Depth 20"/50.8 cm

Table In Front of Knife 16"/40.6 cm

Behind Knife 20"/50.8 cm

Table Height 36"/91.4 cm

Overall Width 36"/91.4 cm

Overall Length 49"/124.5 cm

Overall Height 53"/134.6 cm

Will Pass Through Door (Assembled) 36-1/4"/91.4 cm

(Table/Treadle/Front Shield out) 29"/73.7 cm



C

TITAN 200MPAPER CUTTER


TITAN 200PAPER CUTTER

FEATURES:

20"/51 cm Cutting Width3-1/4" Clamp Opening99 Channel, 9,801 Total Cut MemoryComputer Backgauge ControlComputer DiagnosticsLight Touch Electronic KeypadLCD Digital Backgauge Position IndicatorMenu Driven LCD ScreenCut control (either a plexiglas shield or light beam safety) with two-hand cut button8" x 8" Metal Side Tables are Standard with Light Beam SafetyVariable Mode Data Entry (Fraction, Decimal, Metric)Hydraulic Cutting & ClampingHydraulic Motor - Runs Only During Cutting CycleHeavy Duty Casters For PortabilityVariable Speed Pinpoint Backgauge ControlIndependent Mechanical Foot Pedal ClampingLine Light Cut Position IndicatorPlexiglas Rear Table CoverSteel & Cast Iron ConstructionPush Out FunctionTable Slot Closure DeviceNon-Volatile Memory - No Battery RequiredProgram Lockout

Included: Two Inlaid Carbon Alloy Tool Steel Knives, Three PlasticCutting Sticks, Jogging Aid, Manual, & Tool Kit.

OPTIONS List

Electronic Clamp Pressure Control #K-2852 $316.00

Side Tables 12" x 19" With Plexiglas Shield only #K-44103 $385.00

Knocked Down $500.00

Tilt Shield To Light Beam Conversion Kit Field Installation #K-3030 $1,550.00

List

Titan 200 Cutter Plexiglas shield with two-hand cut button control $11,995.00 Light beams with two-hand cut button control $12,995.00


ELECTRICAL: UL/CUL& CE LISTED

1-1/2 H.P., Single Phase, AC, 60 Hz, 208/230 volts/12 Amps,Service size 15 Amps.Power cord included. Requires Receptacle Type: NEMA6-15R or 6-20R.

ACCESSORIES List

KnivesInlaid Carbon Alloy Tool Steel #A-10034 $109.00Inlaid High Speed Steel #A-10034-1 $269.00

False Clamp Plate #AA-10061 $225.00

Magnetic Clamp Pads #50082 $32.00(Package of Two - 3"x15" each)

Plastic Cutting Sticks(Package of Twelve) #4166 $14.00

Book Guides(Priced per Each) #5-7-M361 $26.00

Jogging Aid #A-12608-2 $40.00

Rykon 100 Hydraulic Oil (capacity 1 gallon)(Five Gallon Container) #S-1991-4 $95.00

Waste Wagon #41058 $128.00

SPECIFICATIONS

Cutting Width 20"/51 cmBackgauge Control PowerClamp Opening 3-1/4"/8 cmClamping Force min. 1,250 Lbs./563 daN

max. 2,500 Lbs./1,125 daNMin Cut - w/o False Clamp Plate 1/2"/13 mmMin Cut - w/False Clamp Plate 1-7/8"/48 mmMaximum Cut Depth 20"/51 cmTable In Front of Knife 15-1/4"/39 cm

Behind Knife 20"/51 cmTable Height 36"/91 cmOverall Width 36"/91 cmOverall Length 49-5/8"/126 cmOverall Height 53"/135 cmWill Pass Through Opening (Assembled) 36-1/4"/91.4 cm

(Table/Treadle/Front Shield out) 29"/73.7 cmNet Weight (approx.) 800 lbs/361 kgShipping Weight (approx.) 920 lbs/418 kg

C




FEATURES:

26-1/2"/67.3 cm Cutting Width4" Clamp Opening99 Channel, 9,801 Total Cut MemoryComputer Backgauge ControlComputer DiagnosticsLight Touch Electronic KeypadLCD Digital Backgauge Position IndicatorMenu Driven LCD ScreenCut control (either a plexiglas shield or light beam safety) with two-hand cut buttonElectronic Clamp Pressure ControlVariable Mode Data Entry (Fraction, Decimal, Metric)Hydraulic Cutting & ClampingVariable Speed Pinpoint Backgauge ControlIndependent Mechanical Foot Pedal ClampingLine Light Cut Position IndicatorPlexiglas Safety Shield (rear)Steel & Cast Iron ConstructionPush Out FunctionTable Slot Closure DeviceSide Tables (13.5" x 16"/34.3 cm x 40.6 cm)Non-Volatile Memory - No Battery RequiredProgram Lockout

Included: Two Inlaid Carbon Alloy Tool Steel Knives, Three PlasticCutting Sticks, Jogging Aid, Manual, & Tool Kit.

List

Titan 265 Cutters Plexiglas shield with two-hand cut button control $17,550.00 Light beams with two-hand cut button control $18,550.00

ACCESSORIES List

Knives Inlaid Carbon Alloy Tool Steel #2263-2 $163.00 Inlaid High Speed Steel #2263-3 $377.00

False Clamp Plate #44027 $250.00

Magnetic Clamp Pads #50082 $32.00 (Package of Two - 3"x15" each)

Plastic Cutting Sticks (Package of Twelve) #4165 $20.00

Book Guides (Each) #5-7-M361 $26.00

Jogging Aid #A-12608-4 $40.00


Waste Wagon #41058 $128.00


OPTIONS List

Single Phase Motor #26-0-017 $750.00Air Table #26-0-600 $1,550.00Knocked Down $625.00

ELECTRICAL: UL/cUL LISTED & CE

Standard Motor - 5 H.P., 208/230 Volts, 60 Hz, 3-Phase, AC 25Amps, Service size 30 Amps.Optional Motor (extra charge) - 5 H.P., 208/230 Volts (240 voltsmax.), 60 Hz, Single-Phase, AC, 30 Amps, Service Size 40 Amps.

This machine must be wired to an individual line through adisconnect box with the proper voltage at the machine.

SPECIFICATIONS

Cutting Width 26-1/2"/67.3 cmBackgauge Control PowerClamp Opening w/out False Clamp Plate 4"/10.2 cm w/ False Clamp Plate 3-3/4"/9.5 cmClamping Force min. 1,470 Lbs./652 daN

max. 4,000 Lbs./1,800 daNMinimum Cut w/out False Clamp Plate 5/8"/16 mm w/False Clamp Plate 1-7/8"/48 mmMaximum Cut Depth 28"/71.1 cmTable Space In Front of Knife 18-1/2"/47 cm Behind Knife 28"/71.1 cmTable Height 36"/91 cmOverall Width 54"/137.2 cmOverall Length 69.5"/176.5 cmOverall Height 59"/150 cmWill Pass Through Opening(Assembled) 54"/137.2 cm

(Table/Treadle out) 31"/79 cmNet Weight (approx.) 1780 lbs/807 kgShipping Weight (approx.) 2020 lbs/916 kg

C



CHAMPION 305 X MANUALBACKGAUGE PAPER CUTTER

List

305 X Cutter $ 19,995.00

FEATURES

30-1/2"/77 cm Cutting WidthHydraulic Cutting & ClampingIndependent Mechanical Foot Pedal ClampingLine Light Cut Position Indicator18" x 24"/46 cm x 61 cm Standard Side TablesSteel & Cast Iron ConstructionLight Beam SafetySplit BackgaugeLED Digital Backgauge Position Indicator

Included: False Clamp Plate, Two Inlaid Carbon Alloy Tool SteelKnives, Four Plastic Cutting Sticks, Jogging Aid, Manual, & Tool Kit

FACTORY INSTALLED OPTIONSSingle Phase Motor $750.00Air Table $1,600.00Plated Table $1,500.00Knocked Down $700.00.5" Minimum Cut $695.00

LARGE SIDE TABLE OPTIONS

24" x 36"/61 cm x 91 cm Side Tables(In Place of Standard Tables)

Factory Installation #21-4-103 $775.00Field Installation #K-2720 $950.00

24" x 36"/61 cm x 91 cm Side Tables With Air*(In Place of Standard Tables)

Factory Installation #21-4-104 $1,350.00Field Installation #K-2731 $1,525.00

*Main Cutter Table Must Have Air.

ACCESSORIES

Knives 30.5"/77.5 cmInlaid Carbon Alloy Tool Steel #47507 $160.00Inlaid High Speed Steel #47508 $382.00


Paper Deflector #AA-13936-1 $695.00



Standard Motor - 5 H.P., 3-Phase, 60 Hz, AC.208/230 Volts/25 Amps (service size 40 Amps) or 460 Volts/11.5 Amps (service size 20 Amps); must be specified at time oforder.Optional Motors (extra charge) - 5 H.P., Single-Phase, 60 Hz, ACor 380/415 Volts, 50Hz, 3-Phase, 10 Amps (Service size 20 Amps),8KW.Available in 208 Volts/47 Amps or 230 Volts/43 Amps (servicesize 60 Amps). This machine must be wired to an individual linethrough a disconnect box with the proper voltage at the machine.

ACCESSORIES (continued)


Book Guides (Priced per Each) #5-7-M361 $26.00

Cutter Safety Jogging Aid #A-12608-4 $40.00

Cutter Care Kit #16077 $77.00


Waste Wagon #41058 $128.00

SPECIFICATIONS

Cutting Width 30-1/2"/77 cmClamp Opening (w/out False Clamp Plate) 4"/10.2 cm

(w/ False Clamp Plate) 3-3/4"/9.5 cm.Clamping Force min. 400 Lbs./180 daN

max. 5,000 Lbs./2,200 daNMinimum Cut (w/out False Clamp Plate) 3/4"/19 mm

(w/ False Clamp Plate) 2"/5 cmMaximum Cut Depth 30-1/2"/77.5 cm.Table In Front of Knife 25"/63.5 cm

Behind Knife 30-1/2"/77.5 cmHeight From Floor 36-1/2"/94 cm

Overall Height 58-1/2"/147 cmOverall Width (w/ side tables) 78-1/2"/200 cm

(w/out side tables) 48-1/2"/123 cmOverall Length 70"/178 cmWill Pass Through Door (Assembled) 49"/124 cm

(Table/Treadle out) 42"/106 cm(Table/Treadle/Motor out) 29"/74 cm

Net Weight (approx.) 2560 lbs/1161 kgShipping Weight (approx.) 2800 lbs/1270 kg

C

CHAMPION 305 X MANUALBACKGUAGE PAPER CUTTER


CHAMPION 305 XD, XG, XTPROGRAMMABLE PAPER CUTTER

List

305 XT Cutter with Air Table $27,995.00305 XG Cutter with Air Table $25,995.00305 XD Cutter with Air Table $24,995.00

FEATURES

30-1/2"/77 cm Cutting WidthHydraulic Cutting & ClampingIndependent Mechanical Foot Pedal ClampingLine Light Cut Position Indicator18" x 24"/46 cm x 61 cm Standard Side TablesSteel & Cast Iron ConstructionTable Slot Closure DeviceLight Beam SafetyAir TableLight Touch Electronic KeypadElectronic Clamp Pressure ControlVariable Speed Pinpoint Backgauge ControlComputer DiagnosticsPower Backgauge ControlPush Out and Send FunctionMenu Driven LCD ScreenLCD Digital Backgauge Position IndicatorVariable Mode Data Entry (Fraction, Decimal, Metric)Non-Volatile Memory - No Battery RequiredProgram Lockout

XT Model Only - Touch-Screen Color DisplayWindows Based SoftwareUnlimited Memory with Floppy Disk Port47,000 Cut Position Memory Within the Cutter

XG Model Only - Dual LCD DisplayVisual Display of Machine FunctionsElectronic Clamp Pressure Control (Programmable Per Cut)99 Channel, 9,801 Total Cut Memory

XD Model Only - Single LCD Display99 Channel, 9,801 Total Cut MemoryElectronic Clamp Pressure Control




Standard Motor - 5 H.P., 3-Phase, 60 Hz, AC.208/230 Volts/25 Amps (service size 40 Amps) or 460 Volts/11.5 Amps (service size 20 Amps); must be specified at time oforder.

Optional Motors (extra charge) - 5 H.P., Single-Phase, 60 Hz, ACor 380/415 Volts, 50Hz, 3-Phase, 10 Amps (Service size 20 Amps),8KW.Available in 208 Volts/47 Amps or 230 Volts/43 Amps (servicesize 60 Amps). This machine must be wired to an individual line through a disconnect box with the proper voltage at the machine.

FACTORY INSTALLED OPTIONSSingle Phase Motor $750.00Non-Airtable (deduct $1,000)Plated Table $1,500.00Knocked Down $700.00.5" Minimum Cut $695.00

LARGE SIDE TABLE OPTIONS

24" x 36"/61 cm x 91 cm Side Tables(In Place of Standard Tables)

Factory Installation #21-4-103 $775.00Field Installation #K-2720 $950.00

24" x 36"/61 cm x 91 cm Side Tables With Air*(In Place of Standard Tables)

Factory Installation #21-4-104 $1,350.00Field Installation #K-2731 $1,525.00

*Main Cutter Table Must Have Air.

COMPUTER CONSOLE UPGRADE OPTIONS

Upgrade Kit to XT #K-2927 $3,500.00(existing XD or XG to XT)

Upgrade Kit to XG #K-2878 $1,500.00(existing XD to XG)

ACCESSORIES

Knives 30.5"/77.5 cmInlaid Carbon Alloy Tool Steel #47507 $160.00 Inlaid High Speed Steel #47508 $382.00


Paper Deflector #AA-13936-1 $695.00

C

CHAMPION 305 XD, XG, XTPROGRAMMABLE PAPER CUTTERS


Champion 305 Cutter Accessories Con't.


Book Guides #5-7-M361 $26.00 (Priced per Each)




Waste Wagon #41058 $128.00

SPECIFICATIONS

Cutting Width 30-1/2"/77 cmClamp Opening (w/out False Clamp Plate) 4"/10.2 cm

(w/ False Clamp Plate) 3-3/4"/9.5 cm.Clamping Force min. 400 Lbs./180 daN


(w/ False Clamp Plate) 2"/5 cmMaximum Cut Depth 30-1/2"/77.5 cm.Table In Front of Knife 25"/63.5 cm

Behind Knife 30-1/2"/77.5 cmHeight From Floor 36-1/2"/94 cm

Overall Height 58-1/2"/147 cmOverall Width (w/ side tables) 78-1/2"/200 cm

(w/out side tables) 48-1/2"/123 cmOverall Length 70"/178 cmWill Pass Through Door (Assembled) 49"/124 cm

(Table/Treadle out) 42"/106 cm(Table/Treadle/Motor out) 29"/74 cm

Net Weight (approx.) 2560 lbs/1161 kgShipping Weight (approx.) 2800 lbs/1270 kg

CHAMPION 305 XD, XG, XTPROGRAMMABLE PAPER CUTTER


NOTES:

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________

____________________________________


CHAMPION 370PAPER CUTTERS

List

370 XT Cutter with Air Table $35,995.00

370 XG Cutter with Air Table $33,995.00

FEATURES

37"/94 cm Cutting WidthLight Touch Electronic KeypadHydraulic Cutting & ClampingElectronic Clamp Pressure ControlVariable Speed Pinpoint Backgauge ControlIndependent Mechanical Foot Pedal ClampingLine Light Cut Position Indicator24" x 36"/61 cm x 91 cm Side TablesPaper DeflectorAir TablePush Out FunctionTable Slot Closure DeviceLight Beam SafetyVariable Mode Data Entry (Fraction, Decimal, Metric)Steel & Cast Iron ConstructionComputer DiagnosticsVisual Display of Machine FunctionsElectronic Clamp Pressure Control (Programmable Per Cut)Non-Volatile Memory - No Battery RequiredProgram Lockout

XT Model Only - Touch Screen Color DisplayWindows Based SoftwareUnlimited Memory with Floppy Disk Port47,000 Cut Position Memory Within The Cutter

XG Model Only - Dual LCD DisplayVisual Display of Machine Functions99 Channel, 9,801 Total Cut Memory


OPTIONS

Plated Table $1,500.00

24" x 36"/61 cm x 91 cm Side Tables With AirFactory Installed #23-0-104 $1,350.00Field Installation #49157 $1,525.00

Knocked Down $900.00

COMPUTER CONSOLE UPGRADE OPTIONS

Upgrade Kit to XT #K-2927-1 $3,500.00(existing XG to XT)



Standard Motor - 10 H.P., 3-Phase, 60 Hz, AC.208 Volts/38 Amps; 230 Volts/33 Amps, (service size 60 Amps) or460 Volts/16.5 Amps (service size 30 Amps); must be specified attime of order.Optional Motors - 380/415 Volts, 50 Hz, 3-Phase, 20 Amps(Service size 30 Amps), 16KWThis machine must be wired to an individual line through adisconnect box with the proper voltage at the machine.

SPECIFICATIONS

Cutting Width 37"/94 cmClamp Opening (w/out False Clamp Plate) 5-1/8"/13 cm

(w/ False Clamp Plate) 4-7/8"/12.4 cm.Clamping Force (Range) min. 1,400 Lbs./563 daN


(w/ False Clamp Plate) 2-5/8"/6.4 cmMaximum Cut Depth 40"/102 cm.Table In Front of Knife 25"/63.5 cm

Behind Knife 40"/102 cmHeight From Floor 36"/92 cm

Overall Height 60"/153 cmOverall Width (w/ side tables) 109"/277 cm

(w/out side tables) 63-1/2"/162 cmOverall Length 86-1/4"/219 cmWill Pass Through Door (Assembled) 63-1/2"/162 cm

(Table/Treadle out) 35"/89 cmNet Weight (approx.) 3750 lbs/1701 kgShipping Weight (approx.) 4400 lbs/2000 kg

ACCESSORIES

Knives 37"/94 cm Inlaid Carbon Alloy Tool Steel #49055 $264.00 Inlaid High Speed Steel #49055-1 $500.00






Rykon 46 Hydraulic Oil (capacity 15 gallons) (Five Gallon Container) #S-1991-3 $95.00

Waste Wagon #41058 $128.00

C

CHAMPION 370PAPER CUTTERS


CUTTER KNIVES &ACCESSORIES

Size/Model Ship Wt. Part # List

37" & 42" Cutters (370 & 420 Series Only)

S/N 30187/down37"/94 cm G 29 lbs/13 kg Inlaid Carbon Alloy Tool Steel #9-142 $269.00

S/N 251/up and all LED, PB, CRT37"/94 cm 30 lbs/14 kg Inlaid Carbon Alloy Tool Steel #9-142-1 $289.0042"/107 cm 43 lbs/20 kg Inlaid Carbon Alloy Tool Steel #10-142-1 $331.00

Champion 370 XG, XT37"/94 cm 29 lbs/13 kg Inlaid Carbon Alloy Tool Steel #49055 $264.00 Inlaid High Speed Steel #49055-1 $500.00

Champion (MC, MCPB, MPC, CRT & MPX)30-1/2"/77 cm 20 lbs/9 kg Inlaid Carbon Alloy Tool Steel #2238-2 $146.00 Inlaid High Speed Steel #2238-3 $296.00

Champion 305 X, XD, XG and XT30-1/2"/77 cm 20 lbs/9 kg Inlaid Carbon Alloy Tool Steel #47507 $160.00 Inlaid High Speed Steel #47508 $382.00

Diamond19-3/8"/49 cm 12 lbs/5 kg #2122-4 $131.0026-1/2"/67 cm 18 lbs/8 kg #A-2263-4 $163.00

Model 20/Titan 20020"/51 cm 12 lbs/5 kg Inlaid Carbon Alloy Tool Steel #A-10034 $109.00 Inlaid High Speed Steel #A-10034-1 $269.00

Titan 26526-1/2"/67.3 cm 18 lbs/8 kg Inlaid Carbon Alloy Tool Steel #2263-2 $163.00 Inlaid High Speed Steel #2263-3 $377.00

Champion Three-Knife TrimmerSet of Three 37 lbs/17 kg #A-6246 $330.00

CMT 330 Three-Knife TrimmerSet of Three 25 lbs/11 kg #56246 $600.00

DocuTrimInlaid High Speed Steel 12 lbs/5 kg #41001 $160.00


Two Hand Control Devices• Contact Challenge Service Department with model and serial number for part numbers and availability.

Accessories


Cutter Care Kit #16077 $77.00 (Includes silicone release spray, rust remover and table wax) Table Wax (1 lb.) #16078 $57.00 Silicone Release #16079 $29.50 Rust-B-Gone #16080 $24.00

Cutter Safety Jogging Aid $40.00 Model 20 Cutters #A-12608-2 Diamond Cutters #A-12608-4 Champion Cutters 305 M Series #A-12608-3 305 X Series #A-12608-4 370 X Series #A-12608-6 420 Series Cutters #A-12608-8

Waste Wagon #41058 $128.00

Hydraulic OilRykon 46 (5 Gallons) #S-1991-3 $95.00Rykon 100 (5 Gallons) #S-1991-4 $95.00

Hydraulic Oil Requirements (Rykon # in parenthesis)CRT, LED, & PB (46) ....................................................... 14 gallonsMPS (46) ......................................................................... 14 gallonsGPB Cutters (46) ............................................................ 15 gallonsChampions (MPC, MCPB, CDC, MPX

& MC serial #3971 to 11196) (46) .................... 2-1/2 gallonsChampions (MC, MCPB, CRT, MPX

& MPC serial #11197 to 97378) (46) ...................... 5 gallonsDiamonds (193 & 265 models-serial #1950 & up) (100) ... 5 gallonsModel 20 (100) .................................................................... 1 gallonDocuTrim (100) ................................................................... 1 gallonChampion Three-Knife Trimmer (46) ................................... 1 gallonCMT 330 Three-Knife Trimmer (46) .................................. 5 gallonsCornering Machines (46) ............................................. 1-1/2 quartsTitan 200 (100) .................................................................... 1 gallonTitan 265 (46) .................................................................... 5 gallons305 X, XD, XG, XT (46) ............................................. 13-1/2 gallons370 XG, XT (46) .............................................................. 15 gallons

CUTTER KNIVES &ACCESSORIES


MEDALIST 870PAPER FOLDER

List

Medalist 870 FolderCombo Rollers w/stand $7,695.00

FEATURESUp to 30,000 81/2" x 11" Sheets Per HourLarge Folder Up-down Plate ConfigurationSwing-Type Paper DeflectorsEasy Access Slitter ShaftsJam Detector on DeliveryRoller CalipersNoise HoodsIntegral Total CounterD.C. DriveStand

Included: One Thin Scoring Blade, Two Scoring Blocks, OneRubber Scoring Tire, One (41-Teeth) Perf Blade, One Perf Stripper,One Perf Block, One Blade Holder, & Two Paper Deflectors, One1/8" Allen Wrench, Two 5/32" Allen Wrenches, & Manual.

OPTIONSLong Delivery

Factory Installation #35290-1 $515.00Field Installation #35290-1 $700.00

MEDALIST ACCESSORIESScoringScoring Blade - Thin #A-10564 $14.15Scoring Blade - Thick #A-10565 $15.25Scoring Blade Holder #10560 $27.50Score Blocks - Collars #10562 $27.50Rubber Score Tire #A-10573 $8.00SlittingSlitter Blade - Bevel Side #A-10571 $13.15Slitter Blade - Flat Side #A-10572 $13.15Flat Head Screw

2 required / blade #S-2107 $2.00Blade Holder #10560 $27.50Slitter Stripper Assembly

Right #AA-10532 $27.50Left #AA-10531 $27.50

Stripper Only - Right #10556 $24.30Stripper Only - Left #10557 $24.30Brass Ring Stripper #A-10975 $21.00

(center trim with wire 1/8")Brass Ring Stripper #A-10976 $24.75

(center trim with wire 1/4")



Standard Motor: 120 Volt, 60 Hz, Single Phase, 15 Amps.Service size 20 Amps.Power cord included

MEDALIST ACCESSORIESPerforatingPerf Blade - (2 per in./12 Teeth) #A-10566 $17.50Perf Blade - (2.5 per in./15 Teeth) #A-10567 $17.50Perf Blade - (4 per in./24 Teeth) #A-10568 $17.50Perf Blade - (5 per in./31 Teeth) #A-10569 $19.00Perf Blade - (7 per in./41 Teeth) #A-10570 $19.00Perf Blade - (10 per in./64 Teeth) #A-10578 $19.00Blade Holder #10560 $27.50Perf Blocks - Die #10561 $17.50Perf Stripper Assembly #AA-11210 $27.50Perf Stripper Blade #11210 $14.15Misc.Pull-Out Tire Assembly #AA-10386 $26.50Pull-Out Tire Only #A-10249 $4.001 Brass-tipped Screw #H-6964-504 $2.25

SPECIFICATIONS

Maximum Sheet Size

Width 14"/36 cm

Length 20"/51 cm

Minimum Sheet Size

Width 4"/10 cm

Length 6"/15 cm

Paper Weight 9# offset to 65# cover

34 g/m2 to 176 g/m2

Maximum Feeder Pile Weight 13 lbs/6 kg

Number of Plates 2

Fold Plate Depth

(plate #1) 2 to 17"/5 to 43 cm

(plate #2) 2 to 9"/5 to 23 cm

Fold Roller Diameter 1-1/2"/3.8 cm

Roller Adjustments Roller Calipers

Fold Rollers Combo Rollers

Maximum Speed - 8-1/2" x 11" 30,000 Sheets Per Hour

Overall Height 26"/66 cm

Overall Length 61-1/2"/156 cm

Overall Width 25"/64 cm



C

MEDALIST 870PAPER FOLDER


JO SINGLE SPINDLEPAPER DRILL

List

JO Drill $1,225.00

FEATURES

Hand Lever Drilling OperationTable Model2"/51 mm Drilling Capacity13 Hollow Drill Bit SizesAutomatic Paper Chip RemovalAdjustable MarginsManual Trip Side Guide

Included: One 1/4"/6.4 mm & One 5/16"/7.9 mm Hollow Drill Bits,Two 1-1/2"/38 mm Wood Drilling Blocks, Trip Backgage, Manual &Tool Kit.

ACCESSORIES

Hollow Drill Bits& Fixed Gages ................................ See Drill Accessories Section

*Smaller diameter bits have less capacity.

Wood Drilling Blocks (price per package of 12)(1-1/2"/38 mm) #A-4682 $12.50

Fibre Cutting Blocks (price per package of 12)(1-1/2"/38 mm) #KK-474 $22.00NOTE: These blocks are to be used with special attachments andare not recommended for drilling.

Side Guide Stops #S-1611-1R $2.75

Round CorneringAttachment #A-6411 $210.00(1/2"/13 mm capacity) Includes holder, three 1-1/2"/38 mm fibrecutting blocks & 7/16"/11 mm blade. This light duty attachment isdesigned for a limited amount of corner cutting.

Round Cornering Knives $45.001/8"/3.2 mm #47421/4"/6.3 mm #47437/16"/11 mm #4744

Straight Diagonal #4741 $140.00


ELECTRICAL:

115/230 Volt, Single-Phase, 60/50 Hz, AC. Service size 15 Amps.Spindle Motor: 1/4 H.P., 5.4 Amps.Power cord included

ACCESSORIES (Continued)

Slitting/SlottingAttachment #A-6410 $250.00Includes holder & knives (1/2"/13 mm capacity).

V-Slotting Knife #A-4708 $65.00

SPECIFICATIONS

Drill Head Operation Hand LeverDrill Bit Diameters 13 Sizes: 1/8" to 1/2"/3 to 13 mmMaximum Drilling Capacity* 2"/51 mmMin. Distance Between Holes

(with adjustable stops) 3/8"/10 mm(with fixed gage) 1/4"/6.4 mm

Adjustable Range(bit to side guide) 0 to 12"/0 to 30 cm(bit to backgage) 0 to 2-3/4"/0 to 7 cm

Overall Height 25"/64 cmOverall Width 18"/46 cmOverall Length 18"/46 cmFloor Space Required 2-1/4 sq. ft./0.21 sq. m.Net Weight (approx.) 52 lbs/23 kgShipping Weight (approx.) 72 lbs/32 kg

JO SINGLE SPINDLEPAPER DRILL


JF SINGLE SPINDLEPAPER DRILL

List

JF Drill $2,145.00

FEATURES

Foot Pedal Control2"/51 mm Drilling Capacity13 Hollow Drill Bit SizesAdjustable MarginsAutomatic Trip Side GuideAutomatic Paper Chip Removal

Included with JF: One 1/4"/6.4 mm & One 5/16"/7.9 mm HollowDrill Bits, Twelve 1-1/2"/38 mm Wood Drilling Blocks, Auto-TripBackgauge, Manual & Tool Kit.

ACCESSORIES

Hollow Drill Bits& Fixed Gages ................................ See Drill Accessories Section

*Smaller diameter bits have less capacity.

Wood Drilling Blocks (price per package of 12)(1-1/2"/38 mm) #A-4682 $12.50

Fibre Cutting Blocks (price per package of 12)(1-1/2"/38 mm) #KK-474 $22.00NOTE: These blocks are to be used with special attachments andare not recommended for drilling.

Side Guide Stops #S-1611-1R $2.75

Round CorneringAttachment #A-6411 $210.00(1/2"/13 mm capacity) Includes holder, three 11/2"/38 mm fibrecutting blocks & 7/16"/11 mm blade. This light duty attachment isdesigned for a limited amount of corner cutting. If a heavierattachment is needed, we recommend the Cornermatic. SeeAccessories.

Round Cornering Knives $45.001/8"/3.2 mm #47421/4"/6.3 mm #47437/16"/11 mm #4744

Straight Diagonal #4741 $140.00


ELECTRICAL:115 Volts, Single-Phase, 60 Hz, AC. Service size 15 Amps.Spindle Motor: 1/4 H.P., 5.3 Amps.Power cord included

ACCESSORIES (continued)Cornermatic CorneringAttachment #A-4980 $795.00(1"/25.4 mm capacity) Includes holder, three cutting blocks & knife(7/16"/11 mm). This medium duty cornering attachment has twicethe capacity and is heavier duty than the Round CorneringAttachment.

Cornermatic Knives $99.00

1/8"/3.2 mm #4981-2 7/16"/11mm #4981-71/4"/6.3 mm #4981-4 1/2"/13 mm #4981-83/8"/9.5 mm #4981-6Straight Diagonal #4982 $95.00

Slitting/SlottingAttachment #A-6410 $250.00Includes holder & knives. 1/2"/13 mm capacity.

V-Slotting Knife #A-4708 $65.00

SPECIFICATIONSDrill Head Operation Foot LeverDrill Bit Diameters (2" capacity) 13 Sizes: 1/8"-1/2"/3 to13mmMaximum Drilling Capacity* 2"/5 cmMin. Distance Between Holes

(with adjustable stops) 3/8"/10 mm(with fixed gage) 1/4"/6.4 mm

Adjustable Range(bit to side guide) 0 to 18-1/2"/0 to 47 cm(bit to backgage) 0 to 4"/0 to 10 cm

Table Height 37"/94 cmOverall Height 60"/142 cmOverall Length 32"/81 cmOverall Width 42"/107 cmFloor Space Required 9.3 sq. ft./0.86 sq. m.Net Weight (approx.) 154 lbs/70 kgShipping Weight (approx.) 225 lbs/102 kg

JF SINGLE SPINDLEPAPER DRILL


EH-3C MULTIPLE SPINDLEPAPER DRILL

List

EH-3C DrillWith standard backgauge $6,995.00With auto-trip side guide $7,425.00

FEATURES

Single Stroke Three Hole Drilling

2-1/2" Drilling Capacity in 4 Drill Bit Sizes

Powerful Hydraulic Operation

Flexible Backgauge Adjustments

Automatic Return of the Drill Head

Automatic Paper Chip Removal

Variable Speed Stroke Control

Included: Three Drilling Heads, Three 1/4” x 2-1/2"/6.4 x 64 mm &Three 5-16” x 2-1/2"/7.9 x 64 mm Hollow Drill Bits, Twelve 3"/7.6 cmDrilling Blocks, Hand Drill Sharpener, Manual & Tool Kit.

OPTIONS

Two Hand Push Button Controls - #A-4851-50 $560.00

ACCESSORIES

Automatic Trip Side Guide(adj. range 0 to 4-1/2"/0 to 13 cm)

Field Installation #A-4615-9 $850.00

Right-Hand Side Guide #K-5731 $72.00

Hollow Drill Bits &Fixed Gages ..................................... See Drill Accessories Section

Wood Drilling Blocks (per package of 12)

(3"/76 mm) #KK-473-3 $29.50

Rykon 100 Hydraulic Oil (capacity 1-1/2 quarts.)

Five gallon container #S-1991-4 $95.00

Drill Shield Kit #48004 $103.00


ELECTRICAL: UL LISTED

Standard Motor: 60 Hz, Single-Phase, AC. Pump: 1/2 H.P.

Spindle: 1 H.P., 208 Volts/18 Amps or 230 Volts/17 Amps.

(Service size 30 Amps.)

Power Cable included with NEMA Receptacle style L6-30R

(12' of #10 gauge 3 conductor cable with 30A twist-lock male plug,cable strain relief, and instructions)

SPECIFICATIONS

Maximum Drilling Capacity 2-1/2"/6.4 mm

Drill Bit Sizes Available

(2" capacity) 13 sizes: 1/8-1/2'/3-13mm(2-1/2" capacity) 1/4, 5/16, 3/8, 1/2"/6-13 mm

Range Between Bits 2-3/4 to 4-1/2"/7 to 11 cm

Range Between Outside Bits 5-1/2 to 9"/14 to 23 cm

Vertical Adjustment of

Individual Heads 1/4"/6 mm

Strokes Per Minute Up to 18

Minimum Distance Between Holes

(with adjustable stops) 3/8"/10 mm

(with fixed gages) 1/4"/6.3 mm

Adj. Range

(bit to backgauge) 0 to 5"/0 to 13 cm

(left bit to side guide) 0 to 14-1/2"/0 to 37 cm

Table Size 19-1/2 x 31-1/2"/50 x 80 cm

Table Height 37"/94 cm

Overall Height 59-1/4"/151 cm

Overall Length 36"/91 cm

Overall Width 41-1/2"/105 cm

Floor Space Needed 10.4 sq. ft./0.97 sq.m.



EH-3C MULTIPLE SPINDLEPAPER DRILL


MS-5 MULTIPLE SPINDLEPAPER DRILL

List

MS-5 Drill - With three standard heads $8,495.00

With three narrow heads $8,995.00

FEATURES

Standard With Three Heads, Add Two More Anytime

Drill Up to Five Holes in One Stroke with Additional Heads

2-1/2" Drilling Capacity in 4 Drill Bit Sizes

Powerful Hydraulic Operation

Table Moves up to Meet Bits

Automatic Paper Chip Removal

Variable Speed Stroke Control

Included: Three Drilling Heads, One Idler (P/N 45161) with

Standard Heads or Two Idlers with Narrow Heads,Three

1/4 x 2-1/2"/6.4 x 64 mm & Three 5/16 x 2-1/2"/7.9 x 64 mmHollow Drill Bits, Three 1-1/4 x 6"/3 x 15 cm Drilling Blocks, HandDrill Sharpener, Manual & Tool Kit.

OPTIONS

Standard Drilling Head #45152 $695.00Narrow Drilling Head #45200 $898.00Two Hand Push Button Control

Factory Installation #40-1-102 $675.00Field Installation #A-4851-48 $825.00

ACCESSORIES

Power Cable Kit (NEMA Receptacle style L6-30R)

#K-2889 $150.00(12' of #10 gauge 3 conductor cable with 30A twist-lock male

plug, cable strain relief, and instructions)

Hollow Drill Bits ............................... See Drill Accessories Section

Wood Drilling Blocks (per package of 24)

(1-1/4" x 6"/3 x 15 cm) #A-6626-24 $27.50

Rykon 100 Hydraulic Oil (capacity 1-1/2 quarts)

Five gallon container #S-1991-4 $95.00

Drill Shield Kit #K-45180 $750.00


ELECTRICAL:Standard Motor: 208/230 Volts/18 Amps, Single-Phase, 60 Hz,AC, (Service size 30 Amps). Pump: 1/2 H.P. Spindle: 1-1/2 H.P.

This machine must be wired to an individual line through adisconnect box with the proper voltage at the machine.

SPECIFICATIONS

Number of Drill Heads 2 to 5

Drill Bit Sizes Available

(2" capacity) 13 sizes: 1/8-1/2"/3-13 mm(2-1/2" capacity) 1/4, 5/16, 3/8, 1/2"/6-13 mm

Center-to-Center Maximum 15"/38 cm

Center-to-Center Minimum

Standard Heads 1-7/8"/48 mm

Optional Narrow Heads 1-3/8"/35 mm

Maximum Drilling Capacity 2-1/2"/63 mm

Strokes Per Minute Up to 18

Backgage Adjustment 0 to 5"/0 to 13 cm

Vertical Adjustment of

Individual Heads 1/4"/6 mm

Table Size 17-3/4 x 34"/45 x 92 cm

Table Height 37"/94 cm

Overall Height 56"/142 cm

Overall Length 36"/92 cm

Overall Width 36"/92 cm

Floor Space Needed 9 sq. ft./0.84 sq.m.


Shipping Weight (approx.) 1,100 lbs/500 kg

Will pass through door with table out 28"

MS-5 MULTIPLE SPINDLEPAPER DRILL


MS-10A MULTIPLESPINDLE PAPER DRILL

FEATURES

Drills up to 10 Holes in One Stroke2-1/2" Drilling Capacity - 4 Drill Bit SizesPowerful Hydraulic OperationVariable Speed Stroke ControlFlexible Side Guide AdjustmentsAutomatic Paper Chip RemovalLighted Work SurfaceRugged Cast Iron Construction

Included: Two Backgage Filler Blocks, Twelve 1-1/4" x 6" WoodDrilling Blocks, Hand Drill Sharpener, Manual, & Tool Kit.

SPECIFICATIONS

Maximum Number of Drill Heads 10Drill Bit Sizes Available*

(2" capacity) 13 sizes: 1/8-1/2"/3-13 mm(2-1/2" capacity) 1/4, 5/16, 3/8, 1/2"/6-13 mm

Center-to-Center Maximum 21"/53 cmCenter-to-Center Minimum 1-1/4"/3.2 cmMinimum Distance Between Holes (w/Auto-Trip Side Guide)

w/adjustable stops 3/8"/9.5 mmw/fixed gages 1/4"/6 mm

Maximum Drilling Capacity 2-1/2"/6.4 cmStrokes Per Minute (adj.) 18 to 26Backgage Adjustment 0" to 9"/0 cm to 23 cmVertical Adj. of Individual Heads 1/4"/6 mmTable Size 24" x 36"/61 cm x 91 cmTable Height 38"/97 cmOverall Height 60"/152 cmOverall Length 35"/89 cmOverall Width 40"/102 cmFloor Space Needed 9.7 sq. ft./0.9 sq.m.Net Weight (approx.) 1350 lbs/608 kgsShipping Weight (approx.) 1660 lbs/747 kgs

LARGE HOLE DRILLING SPECIFICATIONS

Maximum Number of Heads 2

Center-To-Center DistanceMinimum 5"/13 cmMaximum 17-3/4"/45 cm

Maximum Back Margin 2-5/8"/67 cm

List

MS-10A Drill - Without heads $14,595.00(heads purchased separately)


ELECTRICAL:Standard: 3-Phase, 60 Hz, AC, Pump - 3/4 H.P., Spindle - 3 H.P.Available in 208 Volts/14 Amps, 230 Volts/12.8 Amps (service size20 Amps), or 460 Volts/6.6 Amps (service size 15 Amps)Optional: Single-Phase, 60 Hz, AC, Pump - 3/4 H.P.,Spindle - 3 H.P. Available in 208 Volts/26.5 Amps or 230 Volts/24.2 Amps (service size 40 Amps).The MS-10A must be wired to an individual line through adisconnect box with the proper voltage at the machine.

* Large hole drilling (up to 1-1/2" in diameter) is possiblewith conversion kit.

**Triple drilling heads are available for drilling 3 holes on 1" centers.

OPTIONS

Standard Drilling Head #A-6594-6 $898.002-1/2"/6.4 cm. One 1/4" & one 5/16" diameter x 2-1/2" hollow drillbits included (other sizes optional). Also can be used with 2"hollow drill bits.

Triple Drilling Head #A3-6594-5 $3,185.002-1/2"/6.35 cm. Drills three holes at once on 1" centers. Three1/4" & three 5/16" diameter x 2-1/2" hollow drill bits included.

Large HoleConversion Package #A-6500-5 $4,668.00Includes one large hole head, front guard cover extension, frontand rear table adapter, & six plastic drilling blocks. (Drill bits arenot included . See Drill Accessories Section).

Large HoleDrilling Head #A-6594-7 $3,820.00

Single Phase Motor $250.00In place of three phase. Factory installation. 208 Volts/26.5 Ampsor 230 Volts/24.2 Amps. (Service size 40 Amps.)

MS-10A DRILL ACCESSORIES

Hollow Drill Bits See drill accessories section.

Two Hand Push ButtonControls #A-4851-46 $2,900.00

Fixed Side Guide #A-6565 $510.00Single lift drilling; second side guide for drilling two lifts in one stroke;or for drilling a lift on the left & right side guides in two strokes.

Fixed Gages - Saves time on multiple patterns. Fit in the auto tripside guide in place of adjustable stops. Spacing is center-to-centerdistance of holes.24 stops 1/4"/6.3 mm spacing #6653-4 $226.0016 stops 3/8"/9.5 mm spacing #6653-3 $226.0012 stops 1/2"/13 mm spacing #6653-2 $226.00Limited to those sizes presently in stock.

continued

MS-10A MULTIPLESPINDLE PAPER DRILL


MS-10A ACCESSORIES

Size Part # Size Part #

9/16"/14 mm KDG-9 1-1/8"/29 mm KDGB-25/8"/16 mm KDG-10 1-1/4"/32 mm KDGB-43/4"/19 mm KDG-12 1-3/8"/35 mm KDGB-61"/25 mm KDG-16 1-1/2"/38 mm KDGB-8

1-5/8"/41 mm KDGB-10

MS-10A Accesories (continued)

Cornermatic CorneringAttachment #AA-4980-3 $995.001" capacity. Includes 7/16" radius knife & holder.

Plastic Drill Blocks (Each)2-1/4 x 6"/57 x 152 mm #6669 $2.30Not recommended for cornering, use for large hole drilling only.

Fibre Cutting Blocks (Each) #A-12607 $5.00

Wood Drilling Blocks (Package of 24)1-1/4 x 6"/3 x 15 cm #A-6626-24 $27.50

Cornermatic Knives $99.001/8"/3.2 mm #4981-2 7/16"/11 mm #4981-71/4"/6.3 mm #4981-4 1/2"/13 mm #4981-83/8"/9.5 mm #4981-6Straight Diagonal #4982

Extension Side Tables - 22 x 48"/56 x 122 cm.Right side #A-6620 $395.00Left side #A-6620-1 $395.00

Wheeled Dolly #A-6686 $1,590.00Make the MS-10A portable with our steel base & heavy duty casterdolly.

Automatic TripSide Guide #A-6565-3 $1,850.00Fits left side & includes six adjustable stops. Can be used for stepdrilling on multiple hole patterns.

Extra Side Guide Stops #S-1611-1R $2.75For automatic trip side guide.

Chip Chute Extension #A-6676 $290.00Empties chips out the rear of machine instead of into drill base bin.

Drill Head Grease #6614 $8.001 pint. For lubrication of MS-10A.

Rykon 100 Hydraulic Oil (capacity 1-1/2 quarts)Five gallon container #S-1991-4 $95.00

Large Hole Hollow Drill Bits $445.002"/51 mm drilling capacity. For use with large hole drilling head. Sizesother than those listed, available on special order and pricing.


DRILL ACCESSORIES

List

Handy-Sharp #57100 $350.00

We recommend the purchase of this sharpener for multiplespindle drills. Shipping weight approximately 9 lbs/4 kg.

Adapter for Style B & C Hollow Drills* #57114 $70.00

*Style A *Style B *Style CChallenge, Casco, Lawson, Rosback, Nygren-DahlyClimax, Ottawa, SeyboldMartin Yale, Super SpeedReplacement Cutting Bit #6469 $99.00

Hand Drill Sharpener/Chip Remover#A-4950-2 $90.00

A two piece tool that sharpens drill bits to the correct bevel withjust a couple twists. On the other end, it will remove chips fromthe drill bit. Standard equipment with multiple spindle paper drills.

Replacement Cutting Bit #4952 $40.00

DRILL ACCESSORIES

Drill Drift #4687 $11.30For removing drill bits from drill.

T-Head Drill Drift #A-6588 $59.00Welded and hardened.

Drill-Ease Lubricant Stick (Package of 12)#4688 $27.20

Touch stick to spinning bit to lubricate.

Gib Slide Lubricant #6629 Pint $18.00

FIXED INDEX GAGES

These patterns apply to all Challenge drills except the MS-5 andthe MS-10A. See MS-10A page for those gages.*Important: When ordering, please give drill model & serial number.

Pattern - Priced by the number of stops in the fixed gage. Call foravailability and price.

HOLLOW PAPER DRILL BITS (2-1/2"/63.5 MM)Each $28.75Quantity discount available for six or more, bits must be same size.

These drill bits will only fit the EH-3A, EH-3C, MS-5, & MS-10A.

Drill Bit Diameter Part Number

1/4"/6.3 mm CD-4-2-1/25/16"/7.9 mm CD-5-2-1/23/8"/9.5 mm CD-6-2-1/21/2"/12.7 mm CD-8-2-1/2


HOLLOW PAPER DRILL BITS (2"/51 MM)

Each $24.75Quantity discount available for six or more, bits must be same size.Special Order (sizes not listed) ................................. Call for pricesSpecial pricing on orders of 250 drill bits or more - call.

Hole Diameter Drilling Capacity Part Number

1/8"/3.2 mm 5/8"/16 mm CD-2-35/32"/4 mm 1-1/8"/28 mm CD-523/16"/4.8 mm 1-5/8"/41 mm CD-37/32"/5.6 mm 1-5/8"/41 mm CD-721/4"/6.3 mm 2"/51 mm CD-417/64"/6.7 mm 2"/51 mm CD-1749/32"/7.1 mm 2"/51 mm CD-925/16"/7.9 mm 2"/51 mm CD-511/32"/8.7 mm 2"/51 mm CD-1123/8"/9.5 mm 2"/51 mm CD-613/32"/10.3 mm 2"/51 mm CD-1327/16"/11.1 mm 2"/51 mm CD-71/2"/12.7 mm 2"/51 mm CD-8

TEFLON COATED DRILL BITS 2-1/2"/63.5 MMEach $31.50Quantity discount available for six or more, bits must be same size.

All standard 2-1/2" drill bit sizes are available (see hollow drill bit2-1/2" section above for sizes). When ordering Teflon coated bits,use a T before the CD part number.

TEFLON COATED DRILL BITS 2"/51 MMEach $27.25Quantity discount available for six or more, bits must be same size.

All standard 2" drill bit sizes are available (see hollow drill bit 2"section above for sizes). When ordering Teflon coated bits, inserta T before the CD part number.

LARGE HOLE DRILL BITS (2"/51 MM)

Each $445.00For large hole drilling attachments on converted MS-10A & GHmodel paper drills.

Special Order (sizes not listed) ................................. Call for prices

Drill Bit Diameter Part Number

9/16"/14 mm KDG-95/8"/16 mm KDG-103/4"/19 mm KDG-121"/25.4 mm KDG-161-1/8"/29 mm KDGB-21-1/4"/32 mm KDGB-41-3/8"/35 mm KDGB-61-1/2"/38.1 mm KDGB-81-5/8"/41.3 mm KDGB-10

DRILL ACCESSORIES


PAK-RAK

FEATURES

Pak-Rak Holds 11" x 17" Stock

500 Pounds Total Capacity

8 Shelves Supplied

Side Handles

Solidly Constructed

Included: Four Fixed Base Shelves & Eight Removable Shelves.

PAK-RAK ACCESSORIES

Shelves - Four additional shelves can be added.

Right #7489 $40.00Left #7490 $40.00

SPECIFICATIONS

Shelf Size 10-3/4" x 16-3/4"/27 x 43 cm

Shelf Capacity 75 lbs/34 kg

Truck Capacity 500 lbs

Length 38"/97 cm

Width 26"/66 cm

Height 52"/132 cm



List

Pak-Rak® Stock Truck $825.00


FEATURES

Easy Operation

Large Capacity

Self-Aligning Gravity Load

Fast Lock & Release Clamping

High Production Padding

Superior Quality

Portable

SPECIFICATIONS

Maximum Lift Height 31"/79 cm

Maximum Lift Width 23-1/2"/60 cm

Lift Depth 3" to 17+"/8 cm to 43+ cm

Capacity Example 15,000 8-1/2 x 11" 20# bond

Overall Base Area 30" x 30"/76 cm x 76 cm

Overall Height 66-1/2"/170 cm

Fits thru Door 32"/80 cm



Paddy Wagon® Padding Press List

$750.00

PADDY WAGON


FEATURES

Front Loading

Up to 11" x 17" Stock Size

Powerful Jogging Action

Quiet Operation

Maintenance-Free Drive Mechanism

ACCESSORIES

Instant On/Off Footswitch #E-875-6 $ 67.00

SPECIFICATIONS

Pile Height 3" Maximum

Stock Size Up to 11" x 17"

Table Dimensions 11-1/4" x 13-1/4"

Width 18-3/16"

Depth 13-15/16"

Height 17-1/8"

Table Space Needed 1.8 sq. ft.

Net Weight (approx.) 15 lbs.

Shipping Weight (approx.) 17 lbs.

List

Handy-Jog $495.00

ELECTRICAL: UL PENDING

Single-Phase, 120 Volt, 60 Hz, 0.5 Amp

HANDY-JOGPAPER JOGGER


COMBINATIONPAPER JOGGERS

Combination Flat/Tilt Paper Joggers List

Model 2026A - 20" x 26" $2,795.00Includes:Jogger Base #CMC-511-11Table 20" x 26" #CMC-511-2026



FEATURES

Electro - Mechanical Jogging ActionDual Switch - Machine or Foot Dial-A-JogTable Tilt Control 60 Degrees

Included: 12-foot Electrical Cord & Tools.

ACCESSORIES

Table Divider Kit - Removable dividers split jogging table in half orinto quarters.Model 2026A #2026A-6802-DF $109.00Model 2436A #2436A-6802-DF $109.00Model 2840A #2840A-6802-DF $109.00

Adjustable WheeledStand #A-6822 $649.00

Net Weight 65 lbs. Overall Height 26-5/8"Ship Weight 75 lbs.

Heavy Duty stand on four casters adjusts the table height from 31"to 40"/79 to 102 cm.

SPECIFICATIONS 2026A 2436A 2840A

Max. Sheet Size (in.) 20” x 26” 24” x 36” 28” x 40” (cm.) 51 x 66 61 x 91 71 x 102Max. Lift (in./cm.) 4”/102 4”/102 4”/102Table Height (in./cm.) 14.5”/37 14.5”/37 14.5”/37Overall Size (in.) 22” x 27” 25” x 37” 29” x 41”

(cm.) 56 x 69 64 x 94 74 x 104Net Weight (approx.) 130 lbs 145 lbs 160 lbs

59 kg 65 kg 73 kgShip. Weight (approx.) 145 lbs 160 lbs 175 lbs

65 kg 72 kg 80 kg

ELECTRICAL: UL LISTED

Single-Phase, 1/3 H.P., 115 Volts/5.4 Amps, 60 Hz, AC.Power cord included


SPECIFICATIONS

Table Size Overall Size Approximate

Model H x W x L H x W x L Net wt. Ship Wt. Top Wt.

T2 Tilt 4 x 17 x 24" 30 x 29 x 21" 87 lbs 96 lbs 14 lbs

F2 Flat 171/2 x 221/2" 171/4 x 171/2 x 221/2 " 80 lbs 88 lbs 13 lbs

B1 High 8 x 33/8 x 117/8" 22 x 16 x 173/4" 88 lbs 97 lbs 17 lbs

B2 Low 3 x 41/2 x 93/4" 26 x 16 x 213/4" 97 lbs 107 lbs 21 lbs

ELECTRICAL: UL LISTED.

Single-Phase, 60 Hz, AC, 115 volts/4 Amps.Power cord included

Companion SeriesElectro-Magnetic Paper JoggersJoggers tops are interchangeable by simply removing four bolts.One machine base will handle all top types.

ListTilt Top T2 - 4" x 17" x 24" $1,250.00Includes:

Machine Base #CMC-471T2 Tilt Top #CMC-471-T2

Flat Top F2 - 17-1/2" x 22-1/2" $1,200.00Includes:

Machine Base #CMC-471F2 Flat Top #CMC-471-F2

High Bin B1 - 8" x 3-3/8" x 11-7/8 " $1,300.00Includes:

Machine Base #CMC-471B1 High Bin Top With 3 Bins #CMC-471-B1

Low Bin B2 - 3” x 4-1/2" x 9-3/4" $1,500.00Includes:

Machine Base #CMC-471B2 Low Bin Top With 8 Bins #CMC-471-B2

FEATURESInterchangeable TopsElectro-Magnetic Jogging Action

ACCESSORIESNon-Adjustable Stand #A-6822-5 $365.00

Net Weight 28 lbs. Overall Height 26-5/8"Ship weight 33 lbs.

Four Wheels.

Adjustable Wheeled Stand #A-6822 $649.00 Net Weight 65 lbs. Overall Height 26-5/8"

Ship Weight 75 lbs.Heavy Duty stand on four casters adjusts the table height from 31"to 40"/79 to 102 cm.

Adj. Wheeled StandAttachment KIt #K-6866-2 $64.00To attach medium duty jogger to adjustable wheeled stand.

Divider Kit #A-6865-1 $49.00Splits T2 top in half.

COMPANIONPAPER JOGGERS


List

CMT 330 In-Line ModelBase Machine $57,500.00Advanced In-Feed Conveyor & Cooling Elevator $12,750.00Exit Conveyor Assembly 2,250.00Total Price for the In-Line Package $72,500.00

CMT 330 Off-Line ModelBase Machine $57,500.00Hand-Feed Conveyor $2,250.00Exit Conveyor Assembly $2,250.00Total Price for the Off-Line Package $62,000.00

FEATURES

UL Listed (USA and Canada)Trimmed Book Sizes 4" x 6" to 9" x 12"; up to 2" ThickFull Digital Control for Fast, Accurate Changeovers - Knives and Clamps Re-position in 15 SecondsEasy to Use and ProgramLight-Touch Electronic KeypadMenu-Driven LCD Data/Graphic ScreenComputer-Controlled Servomotors Adjust Knives99-Job MemoryComputer DiagnosticsMinimal Maintenance RequirementsHydraulic CuttingAdjustable Clamp PressureAdjustable Pneumatic Gripper PressureRequires No Special Tools or Clampboards When Changing Book SizesRugged ConstructionHigh Speed Steel Knives

Included: Cut Stick, Cut Stick Puller, Knife Lifter, Three WasteBins, Two Sets of Knives, Two Cut Plates, Eighteen Knife Bolts,& T-Handle Hex Wrench

CMT 330Three-Knife Trimmer


CMT 330 Three-KnifeTrimmer (continued)


Standard Motor - 5 HP, 3-Phase, 60 Hz, 208/230 Volts, 25Amps (Service size 30 amps)Air Supply Requirements: Regulated 90 PSI, 5 CFMUnlubricated

Optional Motor - 5 HP, 3-Phase, 50 Hz, 380/415 Volts, 10 kW,12 Amps (Service size 15 amps)

*Power Cord - Due to various local electrical codes, thismachine does not include a power cord.

ACCESSORIES

Knives (High Speed Steel) #56246 $600.00(Set of Three)

Cutting Sticks #56303 $68.00 (Package of Twelve)

Cut Plates #56304 $240.00 (Package of Six)

Waste Bin #56143 $55.00

Waste Wagon #41058 $128.00

Spare Parts Kit #K-56030 $3,500.00

Oil Change Kit #K-56040 $275.00 (Supplies & Containers)

Oil Change Tool Kit #K-56031 $295.00 (Tools to Perform Oil Change)

OPTIONS

In-Feed Conveyor w/Cooling Elevator $12,750.00 (In-Line Model)

Hand-Feed Conveyor (Off-Line Model) $2,250.00

Exit Conveyor (Both Models) $2,250.00

C


SPECIFICATIONS – BASEGENERAL PERFEMemory 99 jobs Starting Time to Change Book Size 15 seconds Starting Throughput up to 400 books per hour Finish SizFloor Loading 60 PSI / 414 kPa Finish SizWaste Bin Capacity 3 @ 143⁄ 4 gal. per bin / 55.8 liters per bin Trim AmOil Capacity 5 gallons / 19 liters Face TrimAir Consumption 5 CFM @ 80-90 PSI / 142 LPM @ 5.5 Bar NOTEKnife Re-grind 1⁄4˝ / 6.4 mm regula

ELECTRICAL – Standard ELECTStandard Motor 5 HP, Three Phase, 60 Hz, AC Optiona

208/230 Volts, 25 Amps (service size: 40 Amps)

SPECIFICATIONS – COMCOMPONENT Overall Overall Over

Height Width DepBase Machine 61̋ / 155 cm 341⁄ 2˝ / 88 cm 84˝ / In-Feed Conveyor - Advanced 26˝ / 66 cm 40˝ / 102 cm 29˝ / (In-line Configuration)Cooling Elevator 451⁄ 2˝ / 116 cm 211⁄ 2˝ / 55 cm 37˝ / (In-line Configuration)In-Feed Conveyor 44˝ / 112 cm 35˝ / 89 cm 121⁄ 8˝ (Off-line Configuration)Exit Conveyor 391⁄ 2˝ / 101 cm 47˝ / 120 cm 121⁄ 8˝

Challenge reserves the right to make changes to any product or specification without notice and w® Challenge and the Challenge logo are registered trademarks of The Challenge Machinery Comp

NOTE: Combined dimension for the in-feed conveyor and cooling elevator shown in illustration does not match specification chart due to component overlap when assembled.



TIONS – BASE MACHINEPERFECT BOUND BOOK SIZEStarting Size (maximum) 91⁄2˝x 125⁄ 8˝ / 241x 320 mmStarting Size (minimum) 6˝x 7˝ / 152.4 x 177.8 mmFinish Size (maximum) 9˝x 12˝ / 228.6 x 304.8 mmFinish Size (minimum) 4˝x 6˝ / 101.6 x 152.4 mm

rs per bin Trim Amount (minimum) 1⁄ 8˝ / 3.2 mmFace Trim (maximum) 51⁄ 2˝ / 140 mm

@ 5.5 Bar NOTE: Requires external air compressorregulated to 5 CFM @ 80-90 PSI

ELECTRICAL – OptionalOptional Motor 5 HP, Three Phase, 50 Hz, AC

380/415 Volts, 10 kW, 12 Amps(service size: 15 Amps)

ATIONS – COMPONENTSrall Overall Net Wt. Shipping Wt.th Depth (approx.) (approx.)/ 88 cm 84˝ / 214 cm 2540 lbs / 1140 kg 2850 lbs / 1300 kg

102 cm 29˝ / 74 cm 150 lbs / 68 kg 230 lbs / 105 kg

/ 55 cm 37˝ / 95 cm 335 lbs / 152 kg 470 lbs / 214 kg

89 cm 121⁄ 8˝ / 31 cm 95 lbs / 43 kg 220 lbs / 100 kg

120 cm 121⁄ 8˝ / 31 cm 85 lbs / 39 kg 210 lbs / 95 kg

ation without notice and without incurring responsibility to existing units.hallenge Machinery Company.

n in illustration mbled.



SINGLECORNERING MACHINE

List

Single Cornering Machines Hydraulic $5,995.00 Manual $3,995.00

HYDRAULIC FEATURES

Powerful Hydraulic Operation4"/10 cm Lift CapacityLighted Work SurfacePrecise Cutting ActionGravity Chip Disposal

MANUAL FEATURES

Manual Operation2"/5 cm Lift CapacityPrecise Cutting ActionGravity Chip Disposal

Included: One Basic Machine, One Knife (specify size),One Die (specify size), Tool Kit, Manual

ACCESSORIES

Knives $250.00Dies $109.00Rykon 46 Hydraulic Oil (capacity 1-1/2 quarts) Five gallon container #S-1991-3 $95.00

Size Knife DieRadius Number Number

1/8"/3.2 mm 6721-2 6722-21/4"/6.3 mm 6721-4 6722-43/8"/9.5 mm 6721-6 6722-61/2"/12.7 mm 6721-8 6722-85/8"/15.9 mm 6721-10 6722-10Straight Diagonal 6761 6762(1-1/4"/32 mm max. diagonal cut)

Jogging/Paper Handling Aid #83014 $90.00


SINGLE CORNERINGMACHINE

ELECTRICAL:1/2 H.P., Single-Phase, 60 HZ, AC 115 Volts/13 Amps.Service size 20 Amps.Power cord included

SPECIFICATIONSHYDRAULIC MANUAL

Maximum Lift Height 4"/10 cm 2"/5 cmRange of Lift Widths OpenCorner Sizes 6 SizesTable Depth 24"/61 cmTable Width 20"/51 cmTable Height 36"/91 cmOverall Height 52"/132 cmFloor Space 24" x 20-1/4"/61 cm x 51.5 cmNet Weight 190 lbs/86 kg 145 lbs/66 kgShipping Weight 265 lbs/120 kg 220 lbs/100 kg

1/4


FEATURES

Handles a Pallet up to 28" x 43"Lifts/Lowers up to 1,500 PoundsLifts to Meet Cutter Table Heights of up to 36-1/2"Hydraulic Lift PowerWelded Steel Frame ConstructionAuto or Manual Up/Down ControlsAdjustable-Height Infrared SensorSensor Arm is Mountable on Left or RightSwivel-Mounted Control ArmCaster and Wheels for MobilityLeveling Feet for Stability

SPECIFICATIONS

Maximum Pile Dimensions 28" x 43"/71 cm x 109 cmMaximum Weight on Shelf

(Load Capacity) 1500 lbs/680 kgMaximum Lift Height 36-1/2"/93 cmOverall Height 57"/145 cmOverall Width 51"/130 cmOverall Length 49-1/4"/125 cmNet Weight (approximate) 784 lbs/356 kgShipping Weight (approximate) 1062 lbs/483 kg

ELECTRICAL:

Standard Motor - 1/2 H.P., Single-Phase, 120 Volts, 60 Hz,AC, 11 Amps, Service size 15 Amps.Power cord included

CAUTION: Use extreme caution when placing this machinenear paper cutters and other machines. Improper placement canresult in a "pinch point" safety hazard to an operator's hands and/or arms. Machine operators and/or their employers areresponsible for guarding and protecting against pinch pointsresulting from use of the PowerLift.

POWERLIFT

List

PowerLift $5,995.00

!

CHALLENGE PRODUCTS - Challenge Machinery · CHALLENGE PRODUCTS CUTTING DRILLING FOLDING CORNERING...

Documents

Transcript of CHALLENGE PRODUCTS - Challenge Machinery · CHALLENGE PRODUCTS CUTTING DRILLING FOLDING CORNERING...