chain_02
Transcript of chain_02
02-309, 02-320, 02-380Status Indicator RAPs
02-309 UI Control Panel Button or Touch Screen RAP 02-320, 02-380 UI Communication Test RAPted data from the image processor within the correct
test failed.
n the machine, GP 14.
munications Self Test.
to UI Errors RAP.
July 20052-61WorkCentre Pro 275 Family (CC232-WCP275F)
02-309 The User Interface Button Test or the Touch Area Test failed during the UI Test.
ProcedureCAUTION
Before a new user interface assembly is installed, identify the software level (GP 4). Check the compatibility of the software on the new user interface assembly. Install the software to meet the customer machine requirements. Use the Customer Administration Tool (CAT), GP 5.
Perform the next steps:
• Switch off the machine, then switch on the machine, GP 14.
• Check the condition of CR12 and CR15 on the IOT PWB, OF7 IOT PWB Diagnostics RAP.
• Enter dC305 UI test. Perform the Communications Self Test.
• Check the harness connections between the user interface, PL 2.10 Item 3 and the image processing PWB, PL 3.10 Item 11.
• Install a new user interface assembly, PL 2.10 Item 1.
02-320 The UI does not receive the requestime out period.
02-380 UI main controller communications
ProcedurePerform the next steps:
• Switch off the machine, then switch o
• Enter dC305 UI test. Perform the Com
• Go to 03-310 Image Processing PWB
WorkCentre Pro 275 Family (CC232-WCP275F)
712, 02-715 UI Failure RAPe.
UI control panel.
n on the UI.
t has failed.
AUTION
stalled, identify the software level (GP 4). Check the ser interface assembly. Install the software to meet he Customer Administration Tool (CAT), GP 5.
n the machine, GP 14.
vant test.
PL 2.10 Item 1.
July 20052-6202-390, 02-391, 02-704, 02-706, 02-705, 02-707, 02-709,
Status Indicator RAPs
02-390, 02-391, 02-704, 02-706 UI Software Error RAP02-390 All of the configured services have not reached a stable state after five minutes from start.
02-391 All the services are not registered when the Image Processor / UI synchronization has occurred.
02-704 Application software checksum has failed.
02-706 UI VRAM failure.
ProcedureCAUTION
Before a new user interface assembly is installed, identify the software level (GP 4). Check the compatibility of the software on the new user interface assembly. Install the software to meet the customer machine requirements. Use the Customer Administration Tool (CAT), GP 5.
Perform the next steps:
• Switch off the machine, then switch on the machine, GP 14.
• Enter dC305 UI test. Perform the Application Checksum Verification Test.
• Reload the UI software. Use the Customer Administration Tool (CAT), GP 5.
• Install a new user interface assembly, PL 2.10 Item 1.
02-705, 02-707, 02-709, 02-02-705 The UI audio tones failed to operat
02-707 Indicate a fault with a button on the
02-709 Indicate a fault with the touch scree
02-712 UI LCD module test failed.
02-715 The LED control panel indicator tes
ProcedureC
Before a new user interface assembly is incompatibility of the software on the new uthe customer machine requirements. Use t
Perform the next steps:
• Switch off the machine, then switch o
• Enter dC305 UI test. Perform the rele
• Install a new user interface assembly,