Non-Rigid Registration in Medical Image Analysis Non-Rigid ...
ch15 kinematics of rigid bodies - Suranaree University of...
Transcript of ch15 kinematics of rigid bodies - Suranaree University of...
11
Kinematics of Kinematics of
Rigid BodiesRigid Bodies
Reference:Beer, Ferdinand P. et al, Vector Mechanics for Engineers : Dynamics, 8th Edition, Mc GrawHillHibbeler R.C., Engineering Mechanics: Dynamics, 11th Edition, Prentice Hall
2
Introduction
• Classification of rigid body motions:
- general motion
- motion about a fixed point
- general plane motion
- rotation about a fixed axis
- curvilinear translation
- rectilinear translation
- translation:
3
An example of bodies undergoing the three types of motion is shown in this mechanism.
C
E
A
D
B
4
Translation
5
Rotation About a Fixed Axis. Velocity
6
Rotation About a Fixed Axis. Acceleration
7
Rotation About a Fixed Axis.
8
Equations Defining the Rotation of a Rigid Body About a Fixed Axis
9
Given: Starting from rest when s = 0, pulley A (rA = 50 mm) is given a constant angular acceleration, αA = 6 rad/s2. Pulley C (rC = 150 mm) has an inner hub D (rD = 75 mm) which is fixed to C and turns with it.
Find: The speed of block B when it has risen s = 6 m.
10
General Plane Motion
11
Absolute and Relative Velocity in Plane Motion
12
Absolute and Relative Velocity in Plane Motion
13
Absolute and Relative Velocity in Plane Motion
14
Sample Problem
The double gear rolls on the stationary lower rack: the velocity of its center is 1.2 m/s.
Determine (a) the angular velocity of the gear, and (b) the velocities of the upper rack R and point D of the gear.
15
Given: Block A is moving down at 2 m/s.
Find: The velocity of B at the instant θ = 45°.
16
Given: Collar C is moving downward with a velocity of 2 m/s.
Find: The angular velocities of CB and AB at this instant.
17
Instantaneous Center of Rotation in Plane Motion
18
Instantaneous Center of Rotation in Plane Motion
19
Sample Problem
The double gear rolls on the stationary lower rack: the velocity of its center is 1.2 m/s.
Determine (a) the angular velocity of the gear, and (b) the velocities of the upper rack R and point D of the gear.
20
Given: A linkage undergoing motion as shown. The velocity of the block, vD, is 3 m/s.
Find: The angular velocities of links AB and BD.
21
Absolute and Relative Acceleration in Plane Motion
22
Absolute and Relative Acceleration in Plane Motion
23
Analysis of Plane Motion in Terms of a Parameter
24
Sample Problem
The center of the double gear has a velocity and acceleration tothe right of 1.2 m/s and 3 m/s2, respectively. The lower rack is stationary.
Determine (a) the angular acceleration of the gear, and (b) the acceleration of points B, C, and D.
25
26
Given: Point A on rod AB has an acceleration of 3 m/s2 and a velocity of 2 m/s at the instant the rod becomes horizontal.
Find: The angular acceleration of the rod at this instant.
27
Given: The disk is rotating with ω = 3 rad/s, α = 8 rad/s2 at this instant.
Find: The acceleration at point B, and the angular velocity and acceleration of link AB.