Ch11-Kinematics of Particles

49
VECTOR MECHANICS FOR ENGINEERS: DYNAMICS Eighth Edition Ferdinand P. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Texas Tech University CHAPTER © 2007 The McGraw-Hill Companies, Inc. All rights reserved 1 1 Kinematics of Particles

Transcript of Ch11-Kinematics of Particles

Page 1: Ch11-Kinematics of Particles

VECTOR MECHANICS FOR ENGINEERS: DYNAMICS

Eighth Edition

Ferdinand P. Beer

E. Russell Johnston, Jr.

Lecture Notes:

J. Walt Oler

Texas Tech University

CHAPTER

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

11Kinematics of Particles

Page 2: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 2

ContentsIntroduction

Rectilinear Motion: Position, Velocity & Acceleration

Determination of the Motion of a Particle

Sample Problem 11.2

Sample Problem 11.3

Uniform Rectilinear-Motion

Uniformly Accelerated Rectilinear-Motion

Motion of Several Particles: Relative Motion

Sample Problem 11.4

Motion of Several Particles: Dependent Motion

Sample Problem 11.5

Graphical Solution of Rectilinear-Motion Problems

Other Graphical Methods

Curvilinear Motion: Position, Velocity & Acceleration

Derivatives of Vector Functions

Rectangular Components of Velocity and Acceleration

Motion Relative to a Frame in Translation

Tangential and Normal Components

Radial and Transverse Components

Sample Problem 11.10

Sample Problem 11.12

Page 3: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 3

Introduction

• Dynamics includes:

- Kinematics: study of the geometry of motion. Kinematics is used to relate displacement, velocity, acceleration, and time without reference to the cause of motion.

- Kinetics: study of the relations existing between the forces acting on a body, the mass of the body, and the motion of the body. Kinetics is used to predict the motion caused by given forces or to determine the forces required to produce a given motion.

• Rectilinear motion: position, velocity, and acceleration of a particle as it moves along a straight line.

• Curvilinear motion: position, velocity, and acceleration of a particle as it moves along a curved line in two or three dimensions.

Page 4: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 4

Rectilinear Motion: Position, Velocity & Acceleration

• Particle moving along a straight line is said to be in rectilinear motion.

• Position coordinate of a particle is defined by positive or negative distance of particle from a fixed origin on the line.

• The motion of a particle is known if the position coordinate for particle is known for every value of time t. Motion of the particle may be expressed in the form of a function, e.g.,

326 ttx

or in the form of a graph x vs. t.

Page 5: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 5

Rectilinear Motion: Position, Velocity & Acceleration

• Instantaneous velocity may be positive or negative. Magnitude of velocity is referred to as particle speed.

• Consider particle which occupies position P at time t and P’ at t+t,

t

xv

t

x

t

0lim

Average velocity

Instantaneous velocity

• From the definition of a derivative,

dt

dx

t

xv

t

0lim

e.g.,

2

32

312

6

ttdt

dxv

ttx

Page 6: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 6

Rectilinear Motion: Position, Velocity & Acceleration• Consider particle with velocity v at time t

and v’ at t+t,

Instantaneous accelerationt

va

t

0lim

tdt

dva

ttv

dt

xd

dt

dv

t

va

t

612

312e.g.

lim

2

2

2

0

• From the definition of a derivative,

• Instantaneous acceleration may be:

- positive: increasing positive velocity

or decreasing negative velocity

- negative: decreasing positive velocity

or increasing negative velocity.

Page 7: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 7

Rectilinear Motion: Position, Velocity & Acceleration

• Consider particle with motion given by326 ttx

2312 ttdt

dxv

tdt

xd

dt

dva 612

2

2

• at t = 0, x = 0, v = 0, a = 12 m/s2

• at t = 2 s, x = 16 m, v = vmax = 12 m/s, a = 0

• at t = 4 s, x = xmax = 32 m, v = 0, a = -12 m/s2

• at t = 6 s, x = 0, v = -36 m/s, a = 24 m/s2

Page 8: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 8

Determination of the Motion of a Particle• Recall, motion of a particle is known if position is known for all time t.

• Typically, conditions of motion are specified by the type of acceleration experienced by the particle. Determination of velocity and position requires two successive integrations.

• Three classes of motion may be defined for:

- acceleration given as a function of time, a = f(t)

- acceleration given as a function of position, a = f(x)

- acceleration given as a function of velocity, a = f(v)

Page 9: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 9

Determination of the Motion of a Particle• Acceleration given as a function of time, a = f(t):

tttx

x

tttv

v

dttvxtxdttvdxdttvdxtvdt

dx

dttfvtvdttfdvdttfdvtfadt

dv

00

0

00

0

0

0

• Acceleration given as a function of position, a = f(x):

x

x

x

x

xv

v

dxxfvxvdxxfdvvdxxfdvv

xfdx

dvva

dt

dva

v

dxdt

dt

dxv

000

202

1221

or or

Page 10: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 10

Determination of the Motion of a Particle

• Acceleration given as a function of velocity, a = f(v):

tv

v

tv

v

tx

x

tv

v

ttv

v

vf

dvvxtx

vf

dvvdx

vf

dvvdxvfa

dx

dvv

tvf

dv

dtvf

dvdt

vf

dvvfa

dt

dv

0

00

0

0

0

0

Page 11: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 11

Sample Problem 11.2

Determine:• velocity and elevation above ground at

time t, • highest elevation reached by ball and

corresponding time, and • time when ball will hit the ground and

corresponding velocity.

Ball tossed with 10 m/s vertical velocity from window 20 m above ground.

SOLUTION:

• Integrate twice to find v(t) and y(t).

• Solve for t at which velocity equals zero (time for maximum elevation) and evaluate corresponding altitude.

• Solve for t at which altitude equals zero (time for ground impact) and evaluate corresponding velocity.

Page 12: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 12

Sample Problem 11.2

tvtvdtdv

adt

dv

ttv

v

81.981.9

sm81.9

00

2

0

ttv

2s

m81.9

s

m10

2

21

00

81.91081.910

81.910

0

ttytydttdy

tvdt

dy

tty

y

22s

m905.4

s

m10m20 ttty

SOLUTION:• Integrate twice to find v(t) and y(t).

Page 13: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 13

Sample Problem 11.2• Solve for t at which velocity equals zero and evaluate

corresponding altitude.

0s

m81.9

s

m10

2

ttv

s019.1t

• Solve for t at which altitude equals zero and evaluate corresponding velocity.

22

22

s019.1s

m905.4s019.1

s

m10m20

s

m905.4

s

m10m20

y

ttty

m1.25y

Page 14: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 14

Sample Problem 11.2• Solve for t at which altitude equals zero and

evaluate corresponding velocity.

0s

m905.4

s

m10m20 2

2

ttty

s28.3

smeaningles s243.1

t

t

s28.3s

m81.9

s

m10s28.3

s

m81.9

s

m10

2

2

v

ttv

s

m2.22v

Page 15: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 15

Sample Problem 11.3

Brake mechanism used to reduce gun recoil consists of piston attached to barrel moving in fixed cylinder filled with oil. As barrel recoils with initial velocity v0, piston moves and oil is forced through orifices in piston, causing piston and cylinder to decelerate at rate proportional to their velocity.

Determine v(t), x(t), and v(x).

kva

SOLUTION:

• Integrate a = dv/dt = -kv to find v(t).

• Integrate v(t) = dx/dt to find x(t).

• Integrate a = v dv/dx = -kv to find v(x).

Page 16: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 16

Sample Problem 11.3SOLUTION:

• Integrate a = dv/dt = -kv to find v(t).

ktv

tvdtk

v

dvkv

dt

dva

ttv

v

00

ln0

ktevtv 0

• Integrate v(t) = dx/dt to find x(t).

tkt

tkt

tx

kt

ek

vtxdtevdx

evdt

dxtv

00

00

0

0

1

ktek

vtx 10

Page 17: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 17

Sample Problem 11.3

• Integrate a = v dv/dx = -kv to find v(x).

kxvv

dxkdvdxkdvkvdx

dvva

xv

v

0

00

kxvv 0

• Alternatively,

0

0 1v

tv

k

vtx

kxvv 0

0

0 or v

tveevtv ktkt

ktek

vtx 10with

and

then

Page 18: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 18

Uniform Rectilinear Motion

For particle in uniform rectilinear motion, the acceleration is zero and the velocity is constant.

vtxx

vtxx

dtvdx

vdt

dx

tx

x

0

0

00

constant

Page 19: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 19

Uniformly Accelerated Rectilinear Motion

For particle in uniformly accelerated rectilinear motion, the acceleration of the particle is constant.

atvv

atvvdtadvadt

dv tv

v

0

000

constant

221

00

221

000

000

attvxx

attvxxdtatvdxatvdt

dx tx

x

020

2

020

221

2

constant00

xxavv

xxavvdxadvvadx

dvv

x

x

v

v

Page 20: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 20

Motion of Several Particles: Relative Motion

• For particles moving along the same line, time should be recorded from the same starting instant and displacements should be measured from the same origin in the same direction.

ABAB xxx relative position of B with respect to A

ABAB xxx

ABAB vvv relative velocity of B with respect to A

ABAB vvv

ABAB aaa relative acceleration of B with respect to A

ABAB aaa

Page 21: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 21

Sample Problem 11.4

Ball thrown vertically from 12 m level in elevator shaft with initial velocity of 18 m/s. At same instant, open-platform elevator passes 5 m level moving upward at 2 m/s.

Determine (a) when and where ball hits elevator and (b) relative velocity of ball and elevator at contact.

SOLUTION:

• Substitute initial position and velocity and constant acceleration of ball into general equations for uniformly accelerated rectilinear motion.

• Substitute initial position and constant velocity of elevator into equation for uniform rectilinear motion.

• Write equation for relative position of ball with respect to elevator and solve for zero relative position, i.e., impact.

• Substitute impact time into equation for position of elevator and relative velocity of ball with respect to elevator.

Page 22: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 22

Sample Problem 11.4SOLUTION:

• Substitute initial position and velocity and constant acceleration of ball into general equations for uniformly accelerated rectilinear motion.

22

221

00

20

s

m905.4

s

m18m12

s

m81.9

s

m18

ttattvyy

tatvv

B

B

• Substitute initial position and constant velocity of elevator into equation for uniform rectilinear motion.

ttvyy

v

EE

E

s

m2m5

s

m2

0

Page 23: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 23

Sample Problem 11.4

• Write equation for relative position of ball with respect to elevator and solve for zero relative position, i.e., impact.

025905.41812 2 ttty EB

s65.3

smeaningles s39.0

t

t

• Substitute impact time into equations for position of elevator and relative velocity of ball with respect to elevator. 65.325Ey

m3.12Ey

65.381.916

281.918

tv EB

s

m81.19EBv

Page 24: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 24

Motion of Several Particles: Dependent Motion

• Position of a particle may depend on position of one or more other particles.

• Position of block B depends on position of block A. Since rope is of constant length, it follows that sum of lengths of segments must be constant.

BA xx 2 constant (one degree of freedom)

• Positions of three blocks are dependent.

CBA xxx 22 constant (two degrees of freedom)

• For linearly related positions, similar relations hold between velocities and accelerations.

022or022

022or022

CBACBA

CBACBA

aaadt

dv

dt

dv

dt

dv

vvvdt

dx

dt

dx

dt

dx

Page 25: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 25

Sample Problem 11.5

Pulley D is attached to a collar which is pulled down at 3 in./s. At t = 0, collar A starts moving down from K with constant acceleration and zero initial velocity. Knowing that velocity of collar A is 12 in./s as it passes L, determine the change in elevation, velocity, and acceleration of block B when block A is at L.

SOLUTION:

• Define origin at upper horizontal surface with positive displacement downward.

• Collar A has uniformly accelerated rectilinear motion. Solve for acceleration and time t to reach L.

• Pulley D has uniform rectilinear motion. Calculate change of position at time t.

• Block B motion is dependent on motions of collar A and pulley D. Write motion relationship and solve for change of block B position at time t.

• Differentiate motion relation twice to develop equations for velocity and acceleration of block B.

Page 26: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 26

Sample Problem 11.5SOLUTION:

• Define origin at upper horizontal surface with positive displacement downward.

• Collar A has uniformly accelerated rectilinear motion. Solve for acceleration and time t to reach L.

2

2

020

2

s

in.9in.82

s

in.12

2

AA

AAAAA

aa

xxavv

s 333.1s

in.9

s

in.12

2

0

tt

tavv AAA

Page 27: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 27

Sample Problem 11.5• Pulley D has uniform rectilinear motion. Calculate

change of position at time t.

in. 4s333.1s

in.30

0

DD

DDD

xx

tvxx

• Block B motion is dependent on motions of collar A and pulley D. Write motion relationship and solve for change of block B position at time t.

Total length of cable remains constant,

0in.42in.8

02

22

0

000

000

BB

BBDDAA

BDABDA

xx

xxxxxx

xxxxxx

in.160 BB xx

Page 28: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 28

Sample Problem 11.5• Differentiate motion relation twice to develop

equations for velocity and acceleration of block B.

0s

in.32

s

in.12

02

constant2

B

BDA

BDA

v

vvv

xxx

s

in.18Bv

0s

in.9

02

2

B

BDA

v

aaa

2s

in.9Ba

Page 29: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 29

Graphical Solution of Rectilinear-Motion Problems

• Given the x-t curve, the v-t curve is equal to the x-t curve slope.

• Given the v-t curve, the a-t curve is equal to the v-t curve slope.

Page 30: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 30

Graphical Solution of Rectilinear-Motion Problems

• Given the a-t curve, the change in velocity between t1 and t2 is equal to the area under the a-t curve between t1 and t2.

• Given the v-t curve, the change in position between t1 and t2 is equal to the area under the v-t curve between t1 and t2.

Page 31: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 31

Other Graphical Methods

• Moment-area method to determine particle position at time t directly from the a-t curve:

1

0

110

01 curve under areav

v

dvtttv

tvxx

using dv = a dt ,

1

0

11001

v

v

dtatttvxx

1

0

1

v

v

dtatt first moment of area under a-t curve with respect to t = t1 line.

Ct

tta-ttvxx

centroid of abscissa

curve under area 11001

Page 32: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 32

Other Graphical Methods

• Method to determine particle acceleration from v-x curve:

BC

ABdx

dvva

tan

subnormal to v-x curve

Page 33: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 33

Curvilinear Motion: Position, Velocity & Acceleration

• Particle moving along a curve other than a straight line is in curvilinear motion.

• Position vector of a particle at time t is defined by a vector between origin O of a fixed reference frame and the position occupied by particle.

• Consider particle which occupies position P defined by at time t and P’ defined by at t + t,

r

r

dt

ds

t

sv

dt

rd

t

rv

t

t

0

0

lim

lim

instantaneous velocity (vector)

instantaneous speed (scalar)

Page 34: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 34

Curvilinear Motion: Position, Velocity & Acceleration

dt

vd

t

va

t

0

lim

instantaneous acceleration (vector)

• Consider velocity of particle at time t and velocity at t + t,

v

v

• In general, acceleration vector is not tangent to particle path and velocity vector.

Page 35: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 35

Derivatives of Vector Functions uP

• Let be a vector function of scalar variable u,

u

uPuuP

u

P

du

Pd

uu

00limlim

• Derivative of vector sum,

du

Qd

du

Pd

du

QPd

du

PdfP

du

df

du

Pfd

• Derivative of product of scalar and vector functions,

• Derivative of scalar product and vector product,

du

QdPQ

du

Pd

du

QPd

du

QdPQ

du

Pd

du

QPd

Page 36: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 36

Rectangular Components of Velocity & Acceleration• When position vector of particle P is given by its

rectangular components,

kzjyixr

• Velocity vector,

kvjviv

kzjyixkdt

dzj

dt

dyi

dt

dxv

zyx

• Acceleration vector,

kajaia

kzjyixkdt

zdj

dt

ydi

dt

xda

zyx

2

2

2

2

2

2

Page 37: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 37

Rectangular Components of Velocity & Acceleration• Rectangular components particularly effective

when component accelerations can be integrated independently, e.g., motion of a projectile,

00 zagyaxa zyx

with initial conditions, 0,,0 000000 zyx vvvzyx

Integrating twice yields

0

02

21

00

00

zgtyvytvx

vgtvvvv

yx

zyyxx

• Motion in horizontal direction is uniform.

• Motion in vertical direction is uniformly accelerated.

• Motion of projectile could be replaced by two independent rectilinear motions.

Page 38: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 38

Motion Relative to a Frame in Translation• Designate one frame as the fixed frame of reference.

All other frames not rigidly attached to the fixed reference frame are moving frames of reference.

• Position vectors for particles A and B with respect to the fixed frame of reference Oxyz are . and BA rr

• Vector joining A and B defines the position of B with respect to the moving frame Ax’y’z’ and

ABr

ABAB rrr

• Differentiating twice,ABv

velocity of B relative to A.ABAB vvv

ABa

acceleration of B relative to A.

ABAB aaa

• Absolute motion of B can be obtained by combining motion of A with relative motion of B with respect to moving reference frame attached to A.

Page 39: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 39

Tangential and Normal Components

• Velocity vector of particle is tangent to path of particle. In general, acceleration vector is not. Wish to express acceleration vector in terms of tangential and normal components.

• are tangential unit vectors for the particle path at P and P’. When drawn with respect to the same origin, and

is the angle between them.

tt ee and

ttt eee

d

ede

eee

e

tn

nnt

t

2

2sinlimlim

2sin2

00

Page 40: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 40

Tangential and Normal Components

tevv• With the velocity vector expressed as

the particle acceleration may be written as

dt

ds

ds

d

d

edve

dt

dv

dt

edve

dt

dv

dt

vda tt

but

vdt

dsdsde

d

edn

t

After substituting,

22 va

dt

dvae

ve

dt

dva ntnt

• Tangential component of acceleration reflects change of speed and normal component reflects change of direction.

• Tangential component may be positive or negative. Normal component always points toward center of path curvature.

Page 41: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 41

Tangential and Normal Components

22 va

dt

dvae

ve

dt

dva ntnt

• Relations for tangential and normal acceleration also apply for particle moving along space curve.

• Plane containing tangential and normal unit vectors is called the osculating plane.

ntb eee

• Normal to the osculating plane is found from

binormale

normalprincipal e

b

n

• Acceleration has no component along binormal.

Page 42: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 42

Radial and Transverse Components• When particle position is given in polar coordinates,

it is convenient to express velocity and acceleration with components parallel and perpendicular to OP.

rr e

d

ede

d

ed

dt

de

dt

d

d

ed

dt

ed rr

dt

de

dt

d

d

ed

dt

edr

erer

edt

dre

dt

dr

dt

edre

dt

drer

dt

dv

r

rr

rr

• The particle velocity vector is

• Similarly, the particle acceleration vector is

errerr

dt

ed

dt

dre

dt

dre

dt

d

dt

dr

dt

ed

dt

dre

dt

rd

edt

dre

dt

dr

dt

da

r

rr

r

22

2

2

2

2

rerr

Page 43: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 43

Radial and Transverse Components• When particle position is given in cylindrical

coordinates, it is convenient to express the velocity and acceleration vectors using the unit vectors . and ,, keeR

• Position vector,

kzeRr R

• Velocity vector,

kzeReRdt

rdv R

• Acceleration vector,

kzeRReRRdt

vda R

22

Page 44: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 44

Sample Problem 11.10

A motorist is traveling on curved section of highway at 60 mph. The motorist applies brakes causing a constant deceleration rate.

Knowing that after 8 s the speed has been reduced to 45 mph, determine the acceleration of the automobile immediately after the brakes are applied.

SOLUTION:

• Calculate tangential and normal components of acceleration.

• Determine acceleration magnitude and direction with respect to tangent to curve.

Page 45: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 45

Sample Problem 11.10

ft/s66mph45

ft/s88mph60

SOLUTION:

• Calculate tangential and normal components of acceleration.

2

22

2

s

ft10.3

ft2500

sft88

s

ft75.2

s 8

sft8866

v

a

t

va

n

t

• Determine acceleration magnitude and direction with respect to tangent to curve.

2222 10.375.2 nt aaa 2s

ft14.4a

75.2

10.3tantan 11

t

n

a

a 4.48

Page 46: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 46

Sample Problem 11.12

Rotation of the arm about O is defined by = 0.15t2 where is in radians and t in seconds. Collar B slides along the arm such that r = 0.9 - 0.12t2 where r is in meters.

After the arm has rotated through 30o, determine (a) the total velocity of the collar, (b) the total acceleration of the collar, and (c) the relative acceleration of the collar with respect to the arm.

SOLUTION:

• Evaluate time t for = 30o.

• Evaluate radial and angular positions, and first and second derivatives at time t.

• Calculate velocity and acceleration in cylindrical coordinates.

• Evaluate acceleration with respect to arm.

Page 47: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 47

Sample Problem 11.12SOLUTION:

• Evaluate time t for = 30o.

s 869.1rad524.030

0.15 2

t

t

• Evaluate radial and angular positions, and first and second derivatives at time t.

2

2

sm24.0

sm449.024.0

m 481.012.09.0

r

tr

tr

2

2

srad30.0

srad561.030.0

rad524.015.0

t

t

Page 48: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 48

Sample Problem 11.12• Calculate velocity and acceleration.

rr

r

v

vvvv

rv

srv

122 tan

sm270.0srad561.0m481.0

m449.0

0.31sm524.0 v

rr

r

a

aaaa

rra

rra

122

2

2

2

22

2

tan

sm359.0

srad561.0sm449.02srad3.0m481.0

2

sm391.0

srad561.0m481.0sm240.0

6.42sm531.0 a

Page 49: Ch11-Kinematics of Particles

© 2007 The McGraw-Hill Companies, Inc. All rights reserved.

Vector Mechanics for Engineers: Dynamics

Eig

ht

hEd

ition

11 - 49

Sample Problem 11.12• Evaluate acceleration with respect to arm.

Motion of collar with respect to arm is rectilinear and defined by coordinate r.

2sm240.0ra OAB