CFR Catalogue
-
Upload
thinfilmsworkshop -
Category
Technology
-
view
1.263 -
download
2
Transcript of CFR Catalogue
![Page 1: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/1.jpg)
Sputtering Machines and Sources
catalogue
![Page 2: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/2.jpg)
CFR Management and Administration
Founded in 1993, the Consorzio Ferrara Ricerche (CFR – Ferrara Research Consortium) is a non‐profit organisation with public and private participation, aimed at the promotion, development and exploitation of human, scientific, technological and economic resources mainly of the territory of Ferrara. The mission of CFR is to promote and to manage research, innovation and technology transfer, by offering itself as a decisive and preferential partner for universities, research centres, public institutions and industrial companies in Italy and abroad, besides acting as a link between the generators of know‐how, industrial organisations and the working world.
![Page 3: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/3.jpg)
3 CFR Technical Staff
![Page 4: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/4.jpg)
4
![Page 5: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/5.jpg)
5
[ TRANSITION METAL NITRIDES ] Sputtering Machine
This prototype is an easy and cheap solution to sputter small samples to test and research new thin film coatings. It is composed of two 2” DC planar magnetrons, and a 2” planar magnetron. The deposition process is set and controlled through a touch screen panel.
![Page 6: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/6.jpg)
6
Full automatic process: only one click to empty the chamber Automatic movement of sample holder and shutter 8 different sputtering processes: single deposition, multilayer, annealing, pre‐sputtering, manual deposition Possibility to control the system manually Automatic sample holder with 4 loading stages 3 Sources for multilayer depositions Heater for the annealing process up on request
www.surfacetreatments.org
![Page 7: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/7.jpg)
7
[ TRANSITION METAL NITRIDES ] Sputtering Machine
The High Vacuum system is composed of: Stainless steel AISI 304 chamber (316 up on request) ISO and KF flanges Two doors for easy sample loading 500 l/s turbo pump and rotary pump Three 100 sccm mass flow controller for Ar, N2 and other gases Two 2” DC planar magnetrons One 2” RF planar magnetron A Resistive Heater up on request Two DC power supplies One RF power supply Touch screen with customizable software to control and set all the machine processes Rotating sample holder with 4 plates and one shutter Operative Specifications (Min value/Max Value): Power (0.2 kW / 25.0 kW) Samples diameter (max 50 mm, more up on request) Sample—shutter distance (10mm/ 100mm) Sputtering pressure range (3∙10‐3 / 5∙10‐2 mbar) Gas flow rate Ar and N2 (1.1 sccm / 100 sccm) Heater temperature (50 °C / 600 °C) Physical Specifications Size: 2050mm (H) x 1343mm (W) x 1336mm (D) Weight ≈ 600 kg
![Page 8: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/8.jpg)
8
![Page 9: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/9.jpg)
9
[ ROLL TO ROLL ] Sputtering Machine
This UHV machine is designed for the deposition of getter films onto alluminium ribbons 500 meters long for solar applications. There are two 10” DC planar magnetrons of 12 kW total power in roll to roll configuration. The deposition process is controlled and set through touch screen panels
![Page 10: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/10.jpg)
10
UHV system with conflat flanges and bakeout system (up to 250 °C) for extremely clean deposition conditions: 1∙10‐9 mbar vacuum limit
Completely closed machine: perfect for industrial applications Extractable roll to roll mechanism for fast and easy ribbon charging Full automatic process: only one click to empty the chamber Automatic control of the ribbon: draft and speed are monitored by load cell and lasers and feedback controlled
Rotating magnets for a uniform target erosion and low flakes production
www.surfacetreatments.org
![Page 11: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/11.jpg)
11
The Ultra High Vacuum system is composed by: Stainless steel AISI 304 chamber (AISI 316 up on request) 200, 150, 100, 63, 35 Conflat flanges Fast entry flange to change the ribbon rapidly 500 l/s turbo pump and rotary pump 100 sccm Argon Mass flow controller Two 10” magnetrons with rotating magnets 12 kW total power Two DC 6 kW power supplies Touch screen with customizable software to control and set up all the machine processes Roll to roll system composed by 8 rolls 2 lasers and a load cell (for diameter and ribbon draft measurement) 8 zones baking system composed of 32 heater elements Physical Specifications: Rack Size: 1900mm (H) x 1100mm (W) x 750mm (D) Deposition system size: 1700mm (H) x 6000mm (W) x 1500mm (D) Rack weight ≈ 200 kg Deposition system weight ≈ 2000 kg Operative Specifications (Min value/Max Value): Power (0.2 kW / 23.0 kW) Baking temperature (50°C /300°C) Pressure limit after baking process1 ( < 1∙10‐8) Sputtering pressure range1 (4∙10‐3 / 5∙10‐2 ) Gas flow rate (1.1 sccm / 100 sccm) Ribbon thickness (25 µm / 50 µm ) Ribbon lenght (25 µm: 20m/500m) (50 µm: 20m/250m) Ribbon speed (0.01 m/min / 2.00 m/min) Ribbon draft ‐read by load cell‐ (0.1 Kg (recommended 3 kg) / 9 kg (recommended 6 kg)) 1 This limit is without the ribbon inside the vacuum chamber.
[ ROLL TO ROLL ] Sputtering Machine
![Page 12: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/12.jpg)
12
![Page 13: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/13.jpg)
13
[ TITANIUM NITRIDE ] Sputtering Machine
This UHV machine provides the deposition of Titanium Nitride films onto 3D samples. A sample holder with an epyciclide motion allows a uniform deposition of the alumina cylinder.
![Page 14: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/14.jpg)
14
www.surfacetreatments.org
Two facing 10“ magnetrons for uniform deposition on each side of the substrates Microbalance to know the film thickness during deposition process Dry pump to avoid back streaming contaminations Special sampleholder with RF contact for pre‐sputtering to clean the sample
surface Epycycloidal motion for uniform deposition
![Page 15: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/15.jpg)
15
[ TITANIUM NITRIDE ] Sputtering Machine
The High Vacuum system is composed of: Stainless steel AISI 304 chamber (AISI 316 up on request) 100 l/s turbo pump and scroll pump 100 sccm Argon, Nitrogen Mass flow controller Two 10” DC planar magnetrons 12 kW total power Two DC 6 kW power supplies A RF 1 kW power supply for plasma etching Rotating sample holder with RF contact for sample pre‐sputtering Magnetrons are mounted on rails for an easy movimentation Microbalance for thickness measurements Operative Specifications (Min value/Max Value): Power (0.2 kW / 15.0 kW) Sputtering pressure range (3∙10‐3 / 5∙10‐2 mbar) Gas flow rate Ar and N2 (1.3 sccm / 100 sccm) Magnetron Power (max: 6 kW)
![Page 16: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/16.jpg)
16
![Page 17: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/17.jpg)
17
[ MULTI‐CHAMBER ] Sputtering Machine
This UHV machine provides the deposition of transition metal nitrides and oxide coatings; multilayer and co‐sputtering depositions. Two different deposition chambers allow two different sputtering processes in the same vacuum process.
![Page 18: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/18.jpg)
18
Two process chamber Cluster magnetron for multilayer film deposition Lift for easy access to the sputtering chamber
www.surfacetreatments.org
![Page 19: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/19.jpg)
19
[ MULTI CHAMBER ] Sputtering Machine
The High Vacuum system is composed by: Stainless steel AISI 304 chamber (AISI 316 up on request) Two process chamber 100 l/s turbo pump and scroll pump 100 sccm Ar, N2, O2 mass flow controller Six 2” DC planar magnetrons Rotating sampleholder Cluster with three 2” magnetrons Magnetron cluster mounted on automatic lift Operative Specifications (Min value/Max Value): Power (0.2 kW / 25.0 kW) Sputtering pressure range (3∙10‐3 / 5∙10‐2 mbar) Gas flow rate Ar N2 and O2 (1.3 sccm / 100 sccm) Magnetron Power (max 1000 W, extendible up on request)
![Page 20: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/20.jpg)
20
![Page 21: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/21.jpg)
21
[ YBCO ] Sputtering Machine
A UHV machine for the deposition of YBCO superconductive films on strip samples
![Page 22: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/22.jpg)
22
www.surfacetreatments.org
The sputtering deposition is heater assisted for best results Rectangular Diode Magnetron for uniform thickness deposition
![Page 23: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/23.jpg)
23
[ YBCO ] Sputtering Machine
The High Vacuum system is composed of: Stainless steel AISI 304 chamber (AISI 316 up on request) Two doors for easy sample loading 63 l/s turbo pump and scroll pump 100 sccm Argon, Oxigen Mass flow controller Rectangular DC diode sputtering source 1kW max power Heater Operative Specifications (Min value/Max Value): Pressure limit after vacuum process1 ( < 2∙10‐6 mbar) Sputtering pressure range (10‐1 / 10 mbar) Gas flow rate Ar and O2 (1.1 sccm / 100 sccm) Magnetron Power (100W / 1000W) 1 This limit is without samples and other external objects inside the vacuum chamber.
![Page 24: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/24.jpg)
24
![Page 25: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/25.jpg)
25
[ PLANAR MAGNETRON ] Sputtering Sources
2”, 4”, 8”, 10” and 12” planar magnetron sputtering sources with permanent magnets or solenoid
![Page 26: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/26.jpg)
26
www.surfacetreatments.org
Target diameter from 2” to 12” Water cooled NdFeB magnets water free in 2” configuration DC or RF powered
![Page 27: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/27.jpg)
27
[ PLANAR MAGNETRON ] Sputtering Sources
2 / 4 inch Planar Magnetron Sputtering Source: Diameter: 2” (50,8 mm) /4” (101,6 mm) Target fixing: on copper baseplate by silver paint or metal eutectic Utilization: up to 30% Magnets: NdFeB, Solenoid up on request for 4” magnetron
(Balanced or Unbalanced Magnetic field confinement up on request) DC power (max): 1 kW / 2 kW RF power (max): 500 W / 1 kW Sputtering Current (max): 3 A / 6 A Sputtering voltage: 100‐1000V Sputtering pressure: 1∙10‐3 mbar to 0,1 mbar Mounting: CF100 flange / CF 150 flange 8 / 10 / 12 inch Planar Magnetron Sputtering Source: Diameter: 8” (203,2 mm) / 10” (240 mm) / 12” (304,8 mm) Target fixing: brazed on copper baseplate Utilization: up to 50% Magnets: Plastimag or NdFeB rotating magnets DC power (max): 3 / 4 / 6 kW RF power (max): 1,5 / 2 / 3 kW Sputtering voltage: 100‐1000V Sputtering pressure: 1∙10‐3 mbar to 0,1 mbar Mounting: ISO flange
![Page 28: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/28.jpg)
28
![Page 29: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/29.jpg)
29
[ RECTANGULAR CATHODIC ARC ] PVD Source
Rectangular Cathodic Arc with solenoid and magnetic filter
![Page 30: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/30.jpg)
30
High deposition rate Excellent film adhesion Magnetic Filter: no macroparticles on deposited films Large deposition area
www.surfacetreatments.org
![Page 31: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/31.jpg)
31
[ RECTANGULAR CATHODIC ARC] PVD Source
Magnetic Filtered Source: Target area: 220 cm2 Target fixing: directly on baseplate screwed or brazed Utilization: up to 60% Target magnetic confinement: 1 Solenoid Utilization mode: DC or pulsed DC Arc Current (max): 600 A Deposition Rate: 35 nm/s (target SnO2, measured at the filter exit) Mounting: Custom rectangular flange Filter: Macroparticles magnetic filter with 2 Solenoids (the filter can be removed)
![Page 32: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/32.jpg)
32
![Page 33: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/33.jpg)
33
[ TRIPLE MAGNETRON CLUSTER ] Sputtering Source
Triple magnetron cluster is the most suitable system to deposit compounds starting from two or three different targets
![Page 34: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/34.jpg)
34
www.surfacetreatments.org
Each magnetron is shuttered in order to deposit selectively from one or two targets: in this way multilayer growth is possible
Suitable for co‐deposition magnetron sputtering The three magnetrons are placed at 120 degree angle one to each other in order to make the system axially symmetric NdFeB magnets water free DC or RF powered
![Page 35: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/35.jpg)
35
[ TRIPLE MAGNETRON CLUSTER ] Sputtering Sources
Cluster Mounting: CF200 flange Flanges: 3 CF100, 4 CF16 Material: Stainless steel AISI 316L 2 inch Planar Magnetron Sputtering Sources Diameter: 2” (50,8 mm) Target fixing: on copper baseplate by silver paint or metal eutectic Utilization: up to 30% Magnets: NdFeB Balanced or Unbalanced Magnetic field confinement DC power (max): 1 kW RF power (max): 500 W Sputtering Current (max): 3 A Sputtering voltage: 100‐1000V Sputtering pressure: 1∙10‐3 mbar to 0,1 mbar Mounting: CF100 flange Electrical connector: Lemo type
![Page 36: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/36.jpg)
36
![Page 37: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/37.jpg)
37
[ RECTANGULAR MAGNETRON/DIODE ] Sputtering Source
A cheap solution for strips and rectangular geometry coatings that require high uniformity thickness
![Page 38: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/38.jpg)
38
High percentage of target erosion Uniformity deposition in a wide square DC powered
www.surfacetreatments.org
![Page 39: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/39.jpg)
39
[ RECTANGULAR MAGNETRON/DIODE ] Sputtering Sources
Rectangular Diode Sputtering Sources Target size: 300 x 30 x 6 mm Target fixing: on copper baseplate by silver paint or metal eutectic Magnets: NdFeB Balanced Magnetic field confinement Utilization: up to 80% in diode mode DC power (max): 1 kW Sputtering Current (max): 3 A Sputtering voltage: 100‐1000V Sputtering pressure: 1∙10‐3 mbar to 0,1 mbar Mounting: CF100 flange Electrical connector: Lemo type
![Page 40: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/40.jpg)
40
![Page 41: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/41.jpg)
41
[ STANDARD MAGNETRON ] Sputtering Source
2” diameter planar magnetron with a high magnetic field provided by permanent magnets
![Page 42: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/42.jpg)
42
Water cooled Mounted on a CF 100 flange Variable target‐substrate distance A shutter for the target can be optionally mounted Works with any kind of conductive target
www.surfacetreatments.org
![Page 43: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/43.jpg)
43
[ STANDARD MAGNETRON ] Sputtering Sources
Rectangular Diode Sputtering Sources Diameter: 2” (50,8 mm) Target fixing: on copper baseplate by silver paint or metal eutectic Utilization: up to 30% Magnets: NdFeB Balanced or Unbalanced Magnetic field confinement DC power (max): 1 kW RF power (max): 500 W Sputtering Current (max): 3 A Sputtering voltage: 100‐1000V Sputtering pressure: 1∙10‐3 mbar to 0,1 mbar Mounting: CF100 flange Electrical connector: Lemo type
![Page 44: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/44.jpg)
44
![Page 45: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/45.jpg)
45
[ CILINDRICAL MAGNETRONS FOR OIL INDUSTRIES ]
Hard coatings, protective layers, anti‐friction thin films, for special pipes designed for oil industries.
![Page 46: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/46.jpg)
46
www.surfacetreatments.org
Hard coating and protective and anti‐friction thin films for metallic pipes
Materials: DLC to transition metals carbides Strong permanent magnets internal (Fig. on the center) or external (Fig. on the right) The cathode create a high plasma confinement along cylinder axis
![Page 47: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/47.jpg)
47
[ CYLINDRICAL MAGNETRONS FOR OIL INDUSTRIES ] Sputtering Sources
Cylindrical Magnetrons Diameter: from 10 mm to 1000 mm Length: from 10 mm to 2000 mm Utilization: up to 80% Magnets: NdFeB permanent Magnets or solenoid
(Balanced Magnetic field confinement) DC power (max): function of dimension Sputtering Current (max): function of dimension Sputtering voltage: 100‐1000V Sputtering pressure: 1∙10‐3 mbar to 0,1 mbar Mounting: CF, KF or custom designed flange
![Page 48: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/48.jpg)
48
![Page 49: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/49.jpg)
49
[ HEATERS ]
IR heater lamp for annealing process and high temperature coating process
![Page 50: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/50.jpg)
50
Cylindrical and rectangular geometry Mounted on a CF 100 flange Fast heating response Maximum temperature achievable 800°C Very low degassing rate during heating
www.surfacetreatments.org
![Page 51: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/51.jpg)
51
[ HEATERS ]
Circular heater Sample Diameter (max): 2” (50,8 mm) Max temperature: 800 °C Power (max): 500 W Voltage: 230 V AC Working pressure: atmospheric pressure to 1∙10‐9 mbar Mounting: CF100 flange Termocouple: k type Rectangular heater Sample size: 60 x 350 mm Max temperature: 800 °C Power (max): 4 kW Voltage: 230 V AC Working pressure: atmospheric pressure to 1∙10‐9 mbar Mounting: CF100 flange Termocouple: k type
![Page 52: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/52.jpg)
52
![Page 53: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/53.jpg)
53
[ BAKING CONTROLLER ]
U.H.V. Baking Control is a complete and easy to use system to control the baking processes in vacuum chambers
3 zone UHV Baking Control 3 independent heating zones 3.3 kW maximum power for each zone 99 hours timer Thermoresistivity probe PT100 for temperature control Over‐temperature alarm Timer/manual operation mode
![Page 54: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/54.jpg)
![Page 55: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/55.jpg)
[ contacts ] Legnaro (PD) - Technical Facilities
Ferrara - Registered Office
e‐mail : [email protected]
web site: http://www.consorzioferrararicerche.it http://www.surfacetreatments.org
Phone : +39 049‐8068321 Fax : +39 049‐8068817
Technical Facilities : Viale dell’Università 2, 35020 Legnaro (PD) ‐ Italy Registered Office : Via Saragat 1, 44100 Ferrara ‐ Italy
![Page 56: CFR Catalogue](https://reader034.fdocuments.in/reader034/viewer/2022052213/556be22cd8b42ab2138b53dc/html5/thumbnails/56.jpg)
56
www.surfacetreatments.org