Cf 10448

AVEVA Instrumentation 12.0.SP5

Product Feature Update

AVEVA Cable Design Cable Length Import


AVEVA Instrumentation 12.0 SP5 delivers a Cable interface

with AVEVA Cable Design

– This requires AVEVA PDMS Schematic Update 12.0 SP6.8 or

AVEVA Hull and Outfitting Schematic Update SP6.8 to be installed

over PDMS or Marine 12.0 SP6


Interface workflow

– Create Cable Catalogue in AVEVA Instrumentation

– Create Cables in AVEVA Instrumentation


Interface workflow

– A Data Integration panel has been added in AVEVA Cable Design

and Paragon

• In Paragon synchronise Cable catalogue from AVEVA

Instrumentation


Interface workflow


and Paragon

• In Cable Design synchronise the Equipment


Interface workflow


and Paragon

• In Cable Design synchronise the Cables


Interface workflow

– In Cable design

• Position the Equipment in the 3D Model

• Add the Cables to Cable Ways

• Route the cables


Interface workflow

– In Instrumentation

• Setup the Interface to use either Plant or Marine

• Choose the Cable Length to synchronise


Interface workflow


• Cable Length can be bulk imported into the Cable list in Wiring

Manager


Interface workflow


• After selecting the menu option and logging into Plant or Marine

• A summary of the Number of cables to be synchronised is

displayed


Interface workflow


• These can then be batch or individually imported

• If Batch is selected then a dialogue box is displayed with all the

cables displayed on the left hand side


Interface workflow


• On the right hand side is displayed the attribute differences for

the selected cable

• Check boxes can be selected and the save button pressed to

synchronise the data


Interface workflow


• Followed by a log file to show the results


Interface workflow


• Cables lengths can also be individually imported from the Cable

details screen


Cable length units can be set from the Project Preferences

dialogue box


An additional report has been added to the Reports tab to

query cables with a mismatched Length against Design

length

Major Equipment Creation and Import


The capability has been added in Wiring Manager Major

Equipment Catalogue to:

– Create Multiple Equipment Catalogue items complete with internals

and connected cables

– Import Multiple Items from Excel


After clicking on the Add Multiple Equipment option a

wizard is displayed.

In the first screen a grid is displayed as below


Rows can be entered manually in the grid by pressing the

new button

The dropdown options on the New button also allow the

user to Copy from a selected Equipment or create multiple

items


If Create Multiple-Items is selected the following screen is

displayed


Completing the fields and pressing the next button will

show them in a dialogue box

The user can then manually correct any duplication or

Cable numbers

Pressing OK then adds the rows to the grid


Multiple items can also be imported from Excel

– On selecting the Import button the following screen is displayed

– Pressing OK will present a file open dialogue box

– On selection of an Excel file the data will be imported to the grid


Rows can be deleted from the grid by pressing the Delete

button

Once the main grid contains all the required rows pressing

the Create button will add them to the catalogue

Issuing Drawings

Issuing Drawings

An “Issue” button has been added to the toolbar on the

Drawing List and Hook-up Drawing list in Designer

The Last Issued date for a drawing is available to add to

the grids in Grid Manager

Issuing Drawings

If a revision is not available the user will have to add a

revision to the drawing

If the drawing has already been issued against the latest

revision the user must add a new revision to the drawing

before issuing

Issuing Drawings

When a drawing file is deleted all its corresponding issues

are deleted

Multiple drawings can be issued by selection in the grid

– if some of the selected drawings cannot be issued an error

summary dialogue will be displayed

– The rest of the drawing will be issued

Issuing Drawings

The Issue button on both grids has a dropdown options list

to view the Issues of drawings

Issuing Drawings

Issues of drawing can be Deleted but only in the order of

last issue to first

Issuing and Change Highlighting Reports

Issuing Drawings

Issue and Revisions buttons have been added to the

Report Manager

Selecting the Revisions button displays the Revision grid in

context to the selected report

Issuing Drawings

Selecting the Add Revision button allows addition of a new

Revision

Issuing Drawings

Selecting the Issue button Issues the Report against the

latest Revision if it has not been used

User will be prompted to create a new Revision if there are

none or they have all been used

Issuing Drawings

Selecting the Open Issues for Selected or All buttons

displays the Issues dialogue for the current context

Issuing Drawings

Issues of reports can be Deleted but only in the order of

last issue to first

Issuing Drawings

Reports can be change highlighted between issues

Saving the document to PDF also saves the highlighting

Issuing Drawings

The change highlight colour can be set in the Report

Preferences dialogue

Issuing Drawings

The Report designer now includes two report title fields that

can be placed as fields on the report

AVEVA NET Gateway Phase 2


The creation of a trigger file on export of data and

document from AVEVA Instrumentation is now optional

– Checkbox has been added to the Setup>AVEVA NET Export screen

– Default state is unchecked


Support for Associations in the XML configuration files has

been improved with the addition of “TargetID” and

“TargetRevision” tags

Performance of hotspotting in Excel to MHTML conversion

has been significantly improved

<Association Type=" ">

<TargetID />

<TargetRevision />

<TargetClassID />

<TargetContext />

<TargetName />

</Association>

Unicode Support in Cable terminations

Unicode Support in Cable terminations

The Cable terminations screen and drawings now support

Unicode characters

Field Bus Enhancements


New reports have been added to Report Manager for Field

Bus


Cable Report of Fieldbus Segments


Equipment Report of Field Bus Segments


Instrument Report of Segments

Instrument Calculations


Instrument calculations have been added as follows:

– Flow Element Sizing

• Calculates the differential pressure and size of a Flow element

– Control Valve Sizing

• Calculates the flow, differential pressure and size of the valve

– Relief Valve Sizing

• Mainly used for gases and vapours. Calculates the size of the Relief

valve to control the pressure

– Thermowell Vibrations

• Calculates the frequency of resonance of the tapered thermowell

– Gas Compressibility Factor

• Also known as the compression factor, is a thermodynamic property for

modifying the ideal gas law to account for the real gas behaviour

The ability to print the calculation results has been added


Flow Element Sizing


Control Valve Sizing


Relief Valve Sizing and Gas compressibility factor


Thermowell Vibrations


Invocation of calculation forms

– From the Datasheets Tab of the Edit Instrument dialogue box

– Calculation type is also shown under the button



– Calculation type can be changed by double clicking the label



– From the Tools tab with Instruments grid open


First time the dialofue box opens a disclaimer message is

dispalyed

After selection of the Sizing Calculation option select a

calculation to perform

Only one row should be selected in the grid


A read only field has been added to the Process Data set of

fields for use in Grid Manager to show the Calculation type

Cf 10448

Documents

Transcript of Cf 10448