CET-Metal Finishing.pdf
-
Upload
miguel-carrion-carrillo -
Category
Documents
-
view
216 -
download
0
Transcript of CET-Metal Finishing.pdf
![Page 1: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/1.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 1/56
EEM-TRP Assessment
Report
Volume IMETAL FINISHING
June 20, 1996
Prepared by:Energy and Environment Center Staff
in Conjunction with CAMP, Inc. Staff of
Cleveland, Ohio
For:The Energy, Environment, and Manufacturing
Technology Reinvestment ProjectEnergy and Environment Center
Industrial Technology InstituteAnn Arbor, Michigan 48106
The NIST Manufacturing
Extension Partnership alongwith the DOE Office of Indus-trial Technologies, and EPA's Design for the Environment group and EPA's Office of Research & Development areresponsible for creating thecoalition that successfullycompeted for TRP funding. Inaddition, these organizationsare important in terms of providing outreach and dis-semination of EEM deliverables to industry and government. Together, theseorganizations have a widevariety of programs targeted at manufacturers to improveenergy efficiency, environmen-tal performance, as well asmanufacturing process effi-ciency and technology access.
EEM-TRP Project
![Page 2: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/2.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 2/56
Foreword
All the assessments were well received, but implementation will take time.
Providing the report is only the first step to saving the customer money. Thecustomer must implement the recommendations listed in the report in orderto achieve the savings. All of the customers had a good understanding of what the next step was in order to achieve the recommended savings. Thespeed at which the customer acted on implementing the recommendation ismixed. Some customers start making changes based on the recommendationsimmediately, but many customers take upwards of a year to start. While an
assessment can take place any time during the year, many companies do notschedule money for such improvements until the beginning of their next fiscalyear. We found that many customers stated that the recommendations were
excellent, but the implementation projects would have to be submitted forapproval for the next fiscal year. The assessment team should keep in
contact with the customers during this period to provide implementationassistance and to help define projects.
Reports included in this volume were first edited to remove proprietaryinformation, such as company name, geographical location, plant layout
diagrams, and brand names. The genericized chapters were then submittedto the companies for approval to publish. Some reports were not released forinclusion in the given format. In these cases, recommendations have been
omitted. Note that the assessment reports included in this volume are onlysummaries of the actual reports, and generally, include less than one third of
the information provided to the customers.
![Page 3: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/3.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 3/56
INTRODUCTION....................................................................................................................................................... 1
COMPANY A.............................................................................................................................................................. 9
RECOMMENDATIONS...................................................................................................................................................... 91 Recycle Rinse Tank Water..................................................................................................................................... 9
2 Upgrade Motors and Drives ............................................................................................................................... 13
3 Increase Wash Bath Life ..................................................................................................................................... 14
4 Upgrade Lighting System.................................................................................................................................... 18
5 Cover Heated Tanks with Insulating Balls.......................................................................................................... 21
6 Upgrade Compressed Air System........................................................................................................................ 23
7 Improve Boiler Efficiency.................................................................................................................................... 27
OPPORTUNITIES............................................................................................................................................................ 321 E-coat Rack Cleaning ......................................................................................................................................... 32
2 Improve Plating Performance by Using Deionized Water.................................................................................. 32
3 Improve Material Flow Through Shipping & Receiving..................................................................................... 33
COMPANY B............................................................................................................................................................ 34
RECOMMENDATIONS.................................................................................................................................................... 351 Upgrade Motors and Drives ............................................................................................................................... 35
2 Upgrade Lighting Systems .................................................................................................................................. 37
3 Upgrade Compressed Air System........................................................................................................................ 39
4 Insulate Steam Pipes ........................................................................................................................................... 42
5 Improve Power Factor........................................................................................................................................ 43
6 Reduce Water Use in Paint Line ......................................................................................................................... 45
7 Reduce Plating Drag-out .................................................................................................................................... 46
OPPORTUNITIES............................................................................................................................................................ 481 Implement a Pull System ..................................................................................................................................... 48
COMPANY C............................................................................................................................................................ 51
RECOMMENDATIONS.................................................................................................................................................... 511 Upgrade Lighting Systems .................................................................................................................................. 51
2 Upgrade Motors and Drives ............................................................................................................................... 54
3 Improve Boiler Efficiency.................................................................................................................................... 55
4 Improve Barrel E-Coat Oven Efficiency ............................................................................................................. 58
5 Upgrade Compressed Air System........................................................................................................................ 60
6 Improve E-Coat Rack Stripping .......................................................................................................................... 63
7 Extend Life of Alkaline Cleaners (Rack A).......................................................................................................... 65
OPPORTUNITIES............................................................................................................................................................ 681 Sludge System...................................................................................................................................................... 68
2 Drag-out Reduction on Rack A ........................................................................................................................... 69
3 Reduce Customer Reject, Sorting & Scrap.......................................................................................................... 70
COMPANY D............................................................................................................................................................ 73
RECOMMENDATIONS.................................................................................................................................................... 731 Upgrade Lighting Systems .................................................................................................................................. 73
2 Upgrade Motors and Drives ............................................................................................................................... 76
3 Upgrade Compressed-Air System ....................................................................................................................... 77
4 Alternative Rack Cleaning Method ..................................................................................................................... 82
5 Improve Power Factor........................................................................................................................................ 86
![Page 4: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/4.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 4/56
OPPORTUNITIES............................................................................................................................................................ 881 Conveyor Cleaning.............................................................................................................................................. 88
2 Automating Solution Removal............................................................................................................................. 88
3 Reducing Gap between Jobs on Conveyor.......................................................................................................... 89
COMPANY E............................................................................................................................................................ 91
RECOMMENDATIONS.................................................................................................................................................... 911 Purchase and install a localized switching capacitor bank. ........ .......... ......... ......... .......... ......... ......... ............... 91
2 Retrofit electric ovens with gas burners or purchase used gas ovens................................................................. 93
3 Process and Cooling Water Separation .............................................................................................................. 95
OPPORTUNITIES............................................................................................................................................................ 961 Make Shop Air Pressure 80 psi ........................................................................................................................... 96
2 Insulate Boiler Steam Lines and Chiller Water Lines ........... .......... ........... .......... ........... .......... ............... .......... . 96
3 Combine Condensate Return and Boiler Feedwater........................................................................................... 96
4 Consider Several Labor-Saving Improvements in Masking and Part Preparation............................................. 96
5 Cool Parts Outside Ovens with Doors Closed .................................................................................................... 97
APPENDIX A ............................................................................................................................................................ 99
APPENDIX B (MOTOR EFFICIENCIES).......................................................................................................... 151
![Page 5: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/5.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 5/56
![Page 6: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/6.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 6/56
![Page 7: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/7.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 7/56
0%
5%
10%15%
20%
25%
30%
35%
40%
45%
CompanyOverhead
Direct Labor
EnvironmentalServices
Material
Outside Services
ProductionOverhead
Utilities
![Page 8: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/8.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 8/56
•
•
•
•
•
•
•
•
•
![Page 9: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/9.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 9/56
•
•
•
![Page 10: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/10.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 10/56
( )
=
=
![Page 11: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/11.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 11/56
![Page 12: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/12.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 12/56
![Page 13: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/13.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 13/56
![Page 14: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/14.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 14/56
•
•
•
•
![Page 15: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/15.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 15/56
1Aqualogic, Inc., North Haven, CT.
![Page 16: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/16.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 16/56
( )
=
=
=
![Page 17: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/17.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 17/56
![Page 18: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/18.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 18/56
•
•
•
![Page 19: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/19.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 19/56
![Page 20: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/20.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 20/56
![Page 21: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/21.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 21/56
( )
=
=
=
![Page 22: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/22.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 22/56
![Page 23: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/23.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 23/56
![Page 24: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/24.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 24/56
![Page 25: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/25.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 25/56
= × × × ×
( ) ( )
=
× ×
×
×
=
( )
= ×
=
×
=
3North American Combustion Handbook, Volume I, Third Edition, 1986, pg. 126
![Page 26: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/26.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 26/56
( )
=
=
=
4According to a McMaster-Carr representative.
![Page 27: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/27.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 27/56
= × × ×
×
![Page 28: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/28.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 28/56
( ) ( )
=×
× ×
×
=
•
•
![Page 29: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/29.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 29/56
![Page 30: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/30.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 30/56
![Page 31: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/31.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 31/56
![Page 32: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/32.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 32/56
°
°
![Page 33: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/33.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 33/56
= × −
5Interpolated from Figure 6-11, “The Control of Boilers”; Dukelow, Sam; Instrument Society of America, 1986.
![Page 34: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/34.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 34/56
=
× −
=
( )
= ×=
×
=
6Based on manufacturers' sales literature.7Based on discussions with boiler adjustment contractors
![Page 35: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/35.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 35/56
( )
=
=
=
![Page 36: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/36.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 36/56
![Page 37: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/37.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 37/56
•
•
![Page 38: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/38.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 38/56
•
•
•
•
•
![Page 39: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/39.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 39/56
![Page 40: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/40.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 40/56
![Page 41: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/41.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 41/56
![Page 42: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/42.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 42/56
![Page 43: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/43.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 43/56
( ) ( )
ES EU FR
kWh
kWh yr
= ×
= ×=
390 871 0 10
39 087
, .
, /
![Page 44: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/44.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 44/56
NCS CS AMC
yr
= −
= −
=
$2, $206
$2,284/
490
![Page 45: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/45.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 45/56
![Page 46: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/46.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 46/56
×
![Page 47: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/47.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 47/56
![Page 48: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/48.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 48/56
![Page 49: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/49.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 49/56
•
•
•
•
![Page 50: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/50.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 50/56
•
•
![Page 51: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/51.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 51/56
•
9 It is assumed that there will be no increase in steam usage, since the evaporators are now used only on weekendsand now will be used to evaporate lesser quantities of water over longer time periods.10 Air knives can be purchased from Exair Corporation, Cincinnati, OH (513)671-3322.
![Page 52: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/52.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 52/56
•
•
![Page 53: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/53.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 53/56
•
•
•
•
•
•
![Page 54: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/54.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 54/56
![Page 55: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/55.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 55/56
![Page 56: CET-Metal Finishing.pdf](https://reader036.fdocuments.in/reader036/viewer/2022081323/577c78251a28abe0548ee8d1/html5/thumbnails/56.jpg)
7/25/2019 CET-Metal Finishing.pdf
http://slidepdf.com/reader/full/cet-metal-finishingpdf 56/56