Certified+ Network+ Associate+Dec+2011+v2.2
-
Upload
fikrul-hakim -
Category
Documents
-
view
217 -
download
0
Transcript of Certified+ Network+ Associate+Dec+2011+v2.2
-
7/31/2019 Certified+ Network+ Associate+Dec+2011+v2.2
1/4
CISCO Certified Network AssociateCCNA (640-802)
Duration : 5 - 6 weeks
Total Classes : 30 hours (10 Classes @ 3 hours/sessions)
30 hours 5 classes @ 6 hours/sessions)
Part Time : Weekday 7pm10pm (Thu & Fri) or
Weekend 1pm7pm (Sat only)
Price : RM1,900* (fee includes e books)
CISCO Exam Fee: USD250 / RM950* (Optional - not included)
*Terms and Condition apply
*Subject to Change
-
7/31/2019 Certified+ Network+ Associate+Dec+2011+v2.2
2/4
About CISCO Certification
CISCO Career Certifications are IT professional certifications for CISCO products. The tests are administered by Pearson
VUE (Prometric previously administered the test; but as of 1 Aug 2007, no longer does). There are three levels of
certification: Associate, Professional, and Expert.
Why study Cisco Certification
Cisco is a world leader in networking for the Internet, comprises over 80% of the Internet backbone. In order tomaintain this huge network system and equipment, job opportunity is always open to Cisco holder.
What can I do with CCNA Certification?
Candidate who completed CCNA certification are ability to install, configure, operate, and troubleshootmedium-size routed and switched networks, including implementation and verification of connections to remote
sites in a WAN. This new curriculum includes basic mitigation of security threats, introduction to wireless
networking concepts and terminology, and performance-based skills. This new curriculum also includes (but is
not limited to) the use of these protocols: IP, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line
Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, accesscontrol lists (ACLs).
CCNA Study Guide
Review how to configure and troubleshoot a small network. Expand the switched network from a small LAN to a medium-sized LAN with multiple switches
supporting VLANs, trunking, and spanning tree.
Describe routing concepts as they apply to a medium-sized network and discuss considerations whenimplementing routing on the network.
Configure, verify, and troubleshoot OSPF. Configure, verify, and troubleshoot EIGRP. Determine how to apply ACLs based on network requirements, and to configure, verify, and
troubleshoot ACLs on a medium-sized network.
Describe when to use NAT or PAT on a medium-sized network, and configure NAT or PAT on routers. Identify and implement the appropriate WAN technology based on network requirements.
-
7/31/2019 Certified+ Network+ Associate+Dec+2011+v2.2
3/4
Course Outline
* Chapter 1 Internetworking
* Chapter 2 Introduction to TCP/IP
* Chapter 3 Subnetting & Variable Length Subnet Mask (VLSM)
* Chapter 4 Cisco Internetworking Operating System (IOS)
* Chapter 5 Managing a Cisco Internetwork
* Chapter 6 IP Routing* Chapter 7 Enhanced IGRP (EIGRP) & Open Shortest Path First (OSPF)
* Chapter 8 Layer 2 Switching and Spanning Tree Protocol (STP)
* Chapter 9 Virtual LAN (VLAN)
* Chapter 10 Security
* Chapter 11 Network Address Translation (NAT)
* Chapter 12 Cisco Wireless Technologies
* Chapter 13 Internet Protocol Version 6 (Ipv6)
Cisco Certified Network Associate (CCNA) - Exam
Candidates have the option of gaining the certification by passing two tests (ICND1 640-822 and ICND2 640-816), or one single test (CCNA 640-802).
The certification is valid for three years; at that time a CCNA holder must either take and pass an exam for oneof the Professional (e.g. Cisco Certified Network Professional-CCNP) or Specialist level certifications
(excluding the sales specialist exams), or pass the (Cisco Certified Internetwork Expert-CCIE) written exam.
Cisco Certification Course Content
This course focuses on providing the skills and knowledge necessary to install, operate, and troubleshoot a
small to medium-size branch office Enterprise network, including configuring several switches and routers,
connecting to a WAN and implementing network security.
Describe the purpose and functions of various network devices Select the components required to meet a network specification Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network Describe common networked applications including web applications Describe the purpose and basic operation of the protocols in the OSI and TCP models Describe the impact of applications (Voice Over IP and Video Over IP) on a network Interpret network diagrams Determine the path between two hosts across a network Describe the components required for network and Internet communications Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach Differentiate between LAN/WAN operation and features
-
7/31/2019 Certified+ Network+ Associate+Dec+2011+v2.2
4/4
Award
At the end of the course the student will be awarded with a certificate of completion and will be awarded the
certificate of achievement upon passing the assessment.
Target Audience
Those who want to enhance their current knowledge in networking and those seeking employment in the
networking area.
For more information, please kindly visitwww.charleston.com.myorwww.qualityittraining.com
Please contact the following:
Miss Poe Zarni Oo at +603-2710 0018 or [email protected]
Office hours: 9am6pm, Monday to Friday
9am1pm, Saturday only
http://www.charleston.com.my/http://www.charleston.com.my/http://www.charleston.com.my/http://www.qualityittraining.com/http://www.qualityittraining.com/http://www.qualityittraining.com/http://www.qualityittraining.com/http://www.charleston.com.my/