CERTIFICATE - gteelettromeccanica.com€¦ · Type(s)/model(s) : SPseries The product and any...
4
DEKRA Certification B.V. j B B.T.M. Holtus K. Lin Managing Director Certification Manager © Integral publication of this certificate is allowed ACCREDITED BY THE DUTCH ACCREDITATION COUNCIL DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396 CERTIFICATE Issued to: Applicant: GTE Elettromeccanica Srl Via Galileo Galilei 18 20875 Burago Di Molgora (MB), Italy Licensee: GTE Elettromeccanica Srl Via Galileo Galilei 18 20875 Burago Di Molgora (MB), Italy Product : Pressure operating control Trade name(s) : GTE Type(s)/model(s) : SP series The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to. DEKRA hereby declares that the above-mentioned product has been certified on the basis of: - a type test according to the standard EN 60730-2-6:2016, EN 60730-1:2016 and EN 60730-1:2016/A1:2019 - an inspection of the production location according to CENELEC Operational Document CIG 021 - a certification agreement with the number 2126409 DEKRA hereby grants the right to use the ENEC certification mark. The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement. This certificate is issued on 9 December 2019 and expires upon withdrawal of one of the above mentioned standards. Certificate number: 71-111573
Transcript of CERTIFICATE - gteelettromeccanica.com€¦ · Type(s)/model(s) : SPseries The product and any...
DEKRA Certification B.V.
j BB.T.M. Holtus K. LinManaging Director Certification Manager
© Integral publication of this certificate is allowed
ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
CERTIFICATE
Issued to:Applicant:GTE Elettromeccanica SrlVia Galileo Galilei 1820875 Burago Di Molgora (MB), Italy
Licensee:GTE Elettromeccanica SrlVia Galileo Galilei 1820875 Burago Di Molgora (MB), Italy
Product : Pressure operating controlTrade name(s) : GTEType(s)/model(s) : SP series
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of:- a type test according to the standard EN 60730-2-6:2016, EN 60730-1:2016 and
EN 60730-1:2016/A1:2019- an inspection of the production location according to CENELEC Operational Document CIG 021- a certification agreement with the number 2126409
DEKRA hereby grants the right to use the ENEC certification mark.
The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement.
This certificate is issued on 9 December 2019 and expires upon withdrawal of one of the above mentioned standards.
Certificate number: 71-111573
ANNEX TO ENEC CERTIFICATE 71-111573 page 1 of 3
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
SPECIFICATION OF THE CERTIFIED PRODUCT
Product dataProduct : Pressure operating controlTrade name(s) : GTEType(s)/model(s) : SP seriesType reference : Unique Type (U.T.)Rated current : 16(4) ARated voltage : 250 V~Pattern nos. : 1(N.O), 1(N.C.) and 6 (change-over)Temperature limit of the control : 125 °CTemperature limit of the medium : 150 °COperating pressure : 4 bar (steam)
6 bar (air and water)Circuit to be controlled : resistive and motorFrequency of operation : 10.000 operating cyclesType of action : 1.BType of disconnection : micro-disconnectionGlow wire test temperature : 850 °CDegree of pollution : macro PD3
micro PD3Degree of protection : IP00Insulating material : tracking resistant (250 V)Class : for class I and II appliancesTerminals : tab terminals (6,3 x 0,8 mm)Markings : tradename and unique type indication on the body
List of componentsComponent Manufacturer/
Trade nameType/Model Approval mark 1)
micro switch ZF Electronics D45X 16(4)A/250V~, 1E4, T125
VDE nr. 40014205
micro switch ROLD VRSR97DA1 16(4)A/250V~, T125, 1E4
IMQ nr. CA02.01307
1) * indicates a component tested as part of the appliance
TESTS
Test requirementsEN 60730-2-6:2016EN 60730-1:2016EN 60730-1:2016/A1:2019
Test resultThe test results are laid down in DEKRA test file 224196900.
Additional informationThis certificate replaces certificate No. 2154682.01 which we herewith declare invalid.
ConclusionThe examination proved that all requirements were met.
ANNEX TO ENEC CERTIFICATE 71-111573 page 2 of 3
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Factory locationGTE Elettromeccanica SrlVia Galileo Galilei 1820875 Burago Di Molgora (MB), Italy
ANNEX TO ENEC CERTIFICATE 71-111573 page 3 of 3
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
SP…. series
Type C (wall boiler)V (steam)I (industrial)A (alimentary)
Connection A = 1/8’’B = 1/4’’C = 3/8’’D = fastE = swivelF = rilsan 6
Set-up x x
Micro switch D (changeover) 16(4) A / 250 V~NO (normal open) 16(4) A / 250 V~NC (normal closed) 16(4) A / 250 V~
Custom x x
