CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv)...

19
This certificate is the property of Exova (UK) Limited trading as Warrington Certification Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429 Signed and sealed for and on behalf of Exova (UK) Limited trading as Warrington Certification Sir Ken Knight Paul Duggan Chairman Certification Manager Impartiality Committee CERTIFICATE OF APPROVAL No CF 5457 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of 1 Page 1 of 19 HEMPEL PAINTS (EMIRATES) LLC Post Box 2000, Sharjah, United Arab Emirates +971 6531 0140 Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions appended hereto: _____________________________________________________________________________________________________ CERTIFIED PRODUCT TECHNICAL SCHEDULE Hempacore AQ 48860 TS 15 Intumescent Coatings Used To Provide Fire Protection To Structural Steelwork Issued: 30 th August 2016 Valid to: 29 th August 2021

Transcript of CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv)...

Page 1: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

Signed and sealed for and on behalf of Exova (UK) Limited trading as Warrington Certification

Sir Ken Knight Paul Duggan Chairman Certification Manager

Impartiality Committee

CERTIFICATE OF APPROVAL No CF 5457

This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products

The undermentioned products of 1

Page 1 of 19

HEMPEL PAINTS (EMIRATES) LLC Post Box 2000, Sharjah, United Arab Emirates

+971 6531 0140

Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions

appended hereto: _____________________________________________________________________________________________________

CERTIFIED PRODUCT TECHNICAL SCHEDULE Hempacore AQ 48860 TS 15 Intumescent Coatings

Used To Provide Fire Protection To Structural Steelwork

Issued: 30th August 2016 Valid to: 29th August 2021

Page 2: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 2 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860 1. This approval relates to the use of Hempacore AQ48860 for the fire protection of I-

shaped and hollow steel sections. The precise scope is given in Tables 1 to 13 which show the total dry film thickness of Hempacore AQ48860 (excluding primer and top sealer) required to provide fire resistance periods in accordance with BS476: Part 21: 1987 of 15 minutes up to 90 minutes for differing sections and section factors.

2. This certification is designed to demonstrate compliance of the product or system

specifically with Approved Document B (England and Wales), Section D of the Technical Standards (Scotland) and Technical Booklet E (N. Ireland). If compliance is required to other regulatory or guidance documents there may be additional considerations or conflict to be taken into account.’

3. The products are approved on the basis of: i) Initial type testing. ii) A design appraisal against TS15. iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The data referring to three-sided fire exposure of beams relates to beams supporting

concrete floor slabs. Separate consideration is required where this is not the case. 5. The data shown is applicable to steel sections blast cleaned to ISO 8501-1 SA21/2 or

equivalent and primed with a suitable and compatible primer. Specifications of surface preparations, primers and top sealers is available from Hempel Paints (Emirates) LLC whose responsibility is to ensure that Hempacore AQ48860 is compatible for use in respect of both ambient and fire conditions. The total dry film thickness of primer and top sealer together should not exceed that tested.

6. The data shown is applicable to Hempacore AQ48860 applied by spray to horizontal,

vertical, flexural and compression members supporting loads up to the maximum design loads specified in BS449: Part 2 as indicated in Tables 1 to 13.

7. The approval relates to on going production. Product and/or its immediate packaging is identified with the manufacturers’ name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate.

8. The data shown in the tables is based on an assessment which complies with the criteria

for acceptability incorporated within the CERTIFIRE scheme.

Page 3: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 3 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table applies to three sided beams with a concrete slab. Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 620°C 650°C 700°C 750°C30 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19735 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19740 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19745 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19750 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19755 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19760 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19765 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19770 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19775 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19780 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19785 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19790 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19795 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197100 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197105 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197110 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197115 0.199 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197120 0.205 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197125 0.212 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197130 0.218 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197135 0.224 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197140 0.231 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197145 0.237 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197150 0.244 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197155 0.250 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197160 0.256 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197165 0.263 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197170 0.269 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197175 0.275 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197180 0.282 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197185 0.288 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197190 0.295 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197195 0.301 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197200 0.307 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197205 0.314 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197210 0.320 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197215 0.326 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197220 0.333 0.202 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197225 0.339 0.207 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197230 0.346 0.213 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197235 0.352 0.218 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197240 0.358 0.224 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197245 0.365 0.229 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197250 0.371 0.235 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197255 0.377 0.240 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197260 0.384 0.245 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197265 0.390 0.251 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197270 0.397 0.256 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197275 0.403 0.262 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197280 0.409 0.267 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197285 0.416 0.272 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197290 0.422 0.278 0.200 0.197 0.197 0.197 0.197 0.197 0.197 0.197295 0.428 0.283 0.204 0.197 0.197 0.197 0.197 0.197 0.197 0.197300 0.435 0.289 0.208 0.197 0.197 0.197 0.197 0.197 0.197 0.197305 0.441 0.294 0.213 0.197 0.197 0.197 0.197 0.197 0.197 0.197310 0.448 0.299 0.217 0.197 0.197 0.197 0.197 0.197 0.197 0.197315 0.454 0.305 0.221 0.197 0.197 0.197 0.197 0.197 0.197 0.197320 0.460 0.310 0.226 0.197 0.197 0.197 0.197 0.197 0.197 0.197325 0.481 0.316 0.230 0.197 0.197 0.197 0.197 0.197 0.197 0.197

Table 1: I-Section Beams 15 Minutes

Thickness (mm) Required for a Design Temperature of

Page 4: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 4 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table applies to three sided beams with a concrete slab. Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 620°C 650°C 700°C 750°C30 0.320 0.230 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19735 0.320 0.230 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19740 0.320 0.230 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19745 0.320 0.230 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19750 0.320 0.230 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19755 0.320 0.230 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19760 0.342 0.243 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19765 0.364 0.255 0.201 0.197 0.197 0.197 0.197 0.197 0.197 0.19770 0.386 0.267 0.210 0.197 0.197 0.197 0.197 0.197 0.197 0.19775 0.408 0.280 0.218 0.197 0.197 0.197 0.197 0.197 0.197 0.19780 0.430 0.292 0.227 0.197 0.197 0.197 0.197 0.197 0.197 0.19785 0.452 0.305 0.235 0.197 0.197 0.197 0.197 0.197 0.197 0.19790 0.473 0.317 0.243 0.200 0.197 0.197 0.197 0.197 0.197 0.19795 0.495 0.330 0.252 0.205 0.197 0.197 0.197 0.197 0.197 0.197100 0.516 0.342 0.260 0.211 0.197 0.197 0.197 0.197 0.197 0.197105 0.537 0.355 0.269 0.216 0.197 0.197 0.197 0.197 0.197 0.197110 0.558 0.367 0.277 0.221 0.197 0.197 0.197 0.197 0.197 0.197115 0.579 0.380 0.285 0.227 0.197 0.197 0.197 0.197 0.197 0.197120 0.601 0.392 0.294 0.232 0.197 0.197 0.197 0.197 0.197 0.197125 0.622 0.405 0.302 0.237 0.197 0.197 0.197 0.197 0.197 0.197130 0.643 0.417 0.311 0.243 0.197 0.197 0.197 0.197 0.197 0.197135 0.664 0.430 0.319 0.248 0.199 0.197 0.197 0.197 0.197 0.197140 0.685 0.442 0.328 0.253 0.204 0.197 0.197 0.197 0.197 0.197145 0.707 0.455 0.336 0.259 0.208 0.197 0.197 0.197 0.197 0.197150 0.728 0.467 0.344 0.264 0.213 0.197 0.197 0.197 0.197 0.197155 0.749 0.480 0.353 0.269 0.218 0.197 0.197 0.197 0.197 0.197160 0.768 0.493 0.361 0.275 0.223 0.197 0.197 0.197 0.197 0.197165 0.783 0.505 0.370 0.280 0.228 0.197 0.197 0.197 0.197 0.197170 0.797 0.518 0.378 0.285 0.233 0.197 0.197 0.197 0.197 0.197175 0.811 0.531 0.386 0.291 0.238 0.197 0.197 0.197 0.197 0.197180 0.825 0.543 0.395 0.296 0.243 0.197 0.197 0.197 0.197 0.197185 0.840 0.556 0.403 0.301 0.248 0.197 0.197 0.197 0.197 0.197190 0.854 0.569 0.412 0.307 0.253 0.197 0.197 0.197 0.197 0.197195 0.868 0.581 0.420 0.312 0.258 0.197 0.197 0.197 0.197 0.197200 0.882 0.594 0.428 0.317 0.263 0.197 0.197 0.197 0.197 0.197205 0.897 0.607 0.437 0.323 0.268 0.197 0.197 0.197 0.197 0.197210 0.911 0.619 0.445 0.328 0.273 0.201 0.197 0.197 0.197 0.197215 0.925 0.632 0.454 0.333 0.278 0.206 0.197 0.197 0.197 0.197220 0.939 0.645 0.462 0.339 0.283 0.211 0.197 0.197 0.197 0.197225 0.953 0.657 0.477 0.344 0.288 0.216 0.197 0.197 0.197 0.197230 0.968 0.670 0.493 0.350 0.293 0.221 0.197 0.197 0.197 0.197235 0.982 0.683 0.508 0.355 0.298 0.226 0.198 0.197 0.197 0.197240 0.996 0.695 0.523 0.360 0.303 0.231 0.203 0.197 0.197 0.197245 1.010 0.708 0.538 0.366 0.308 0.236 0.208 0.197 0.197 0.197250 1.025 0.721 0.554 0.371 0.313 0.241 0.213 0.197 0.197 0.197255 1.039 0.733 0.569 0.376 0.318 0.246 0.218 0.197 0.197 0.197260 1.053 0.746 0.584 0.382 0.323 0.251 0.222 0.200 0.197 0.197265 1.067 0.758 0.599 0.387 0.328 0.256 0.227 0.204 0.197 0.197270 1.081 0.774 0.615 0.392 0.333 0.261 0.232 0.209 0.197 0.197275 1.096 0.793 0.630 0.398 0.338 0.266 0.237 0.213 0.197 0.197280 - 0.812 0.645 0.403 0.343 0.271 0.242 0.217 0.197 0.197285 - 0.830 0.660 0.408 0.348 0.276 0.247 0.222 0.197 0.197290 - 0.849 0.676 0.414 0.353 0.281 0.252 0.226 0.197 0.197295 - 0.868 0.691 0.419 0.358 0.287 0.257 0.230 0.197 0.197300 - 0.887 0.706 0.424 0.363 0.292 0.262 0.235 0.197 0.197305 - 0.905 0.721 0.430 0.368 0.297 0.267 0.239 0.197 0.197310 - 0.924 0.737 0.435 0.373 0.302 0.271 0.243 0.197 0.197315 - 0.943 0.752 0.440 0.378 0.307 0.276 0.248 0.197 0.197320 - 0.961 0.767 0.446 0.383 0.312 0.281 0.252 0.197 0.197325 - 0.980 0.782 0.451 0.388 0.317 0.286 0.256 0.197 0.197

Table 2: I-Section Beams 30 Minutes

Thickness (mm) Required for a Design Temperature of

Page 5: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 5 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table applies to three sided beams with a concrete slab. Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 620°C 650°C 700°C 750°C30 0.511 0.377 0.308 0.258 0.217 0.197 0.197 0.197 0.197 0.19735 0.511 0.377 0.308 0.258 0.217 0.197 0.197 0.197 0.197 0.19740 0.511 0.377 0.308 0.258 0.217 0.197 0.197 0.197 0.197 0.19745 0.511 0.377 0.308 0.258 0.217 0.197 0.197 0.197 0.197 0.19750 0.511 0.377 0.308 0.258 0.217 0.197 0.197 0.197 0.197 0.19755 0.511 0.377 0.308 0.258 0.217 0.197 0.197 0.197 0.197 0.19760 0.551 0.401 0.325 0.270 0.226 0.200 0.197 0.197 0.197 0.19765 0.590 0.425 0.342 0.282 0.235 0.206 0.198 0.197 0.197 0.19770 0.629 0.450 0.358 0.294 0.244 0.212 0.204 0.197 0.197 0.19775 0.668 0.475 0.375 0.306 0.253 0.218 0.209 0.197 0.197 0.19780 0.707 0.501 0.391 0.318 0.262 0.224 0.215 0.202 0.197 0.19785 0.746 0.528 0.408 0.330 0.271 0.230 0.220 0.207 0.197 0.19790 0.778 0.554 0.424 0.342 0.280 0.236 0.226 0.212 0.197 0.19795 0.802 0.580 0.441 0.354 0.289 0.242 0.231 0.217 0.197 0.197100 0.826 0.607 0.457 0.366 0.299 0.248 0.237 0.222 0.197 0.197105 0.850 0.633 0.475 0.378 0.308 0.254 0.242 0.227 0.197 0.197110 0.875 0.660 0.492 0.389 0.317 0.260 0.247 0.233 0.201 0.197115 0.899 0.686 0.510 0.401 0.326 0.266 0.253 0.238 0.205 0.197120 0.923 0.712 0.527 0.413 0.335 0.272 0.258 0.243 0.210 0.197125 0.947 0.739 0.545 0.425 0.344 0.278 0.264 0.248 0.214 0.197130 0.972 0.765 0.562 0.437 0.353 0.284 0.269 0.253 0.219 0.197135 0.996 0.783 0.580 0.449 0.362 0.290 0.275 0.258 0.224 0.197140 1.020 0.801 0.597 0.461 0.371 0.296 0.280 0.263 0.228 0.197145 1.044 0.820 0.615 0.474 0.380 0.302 0.286 0.268 0.233 0.197150 1.069 0.838 0.632 0.486 0.389 0.308 0.291 0.274 0.238 0.197155 1.093 0.856 0.650 0.498 0.399 0.314 0.296 0.279 0.242 0.197160 - 0.874 0.667 0.511 0.408 0.320 0.302 0.284 0.247 0.197165 - 0.892 0.685 0.523 0.417 0.326 0.307 0.289 0.251 0.202170 - 0.910 0.702 0.535 0.426 0.332 0.313 0.294 0.256 0.206175 - 0.928 0.720 0.548 0.435 0.338 0.318 0.299 0.261 0.210180 - 0.946 0.737 0.560 0.444 0.344 0.324 0.304 0.265 0.214185 - 0.965 0.755 0.573 0.453 0.350 0.329 0.309 0.270 0.219190 - 0.983 0.772 0.585 0.462 0.356 0.335 0.315 0.275 0.223195 - 1.001 0.789 0.597 0.477 0.362 0.340 0.320 0.279 0.227200 - 1.019 0.806 0.610 0.492 0.368 0.345 0.325 0.284 0.231205 - 1.037 0.823 0.622 0.507 0.374 0.351 0.330 0.289 0.236210 - 1.055 0.840 0.634 0.522 0.380 0.356 0.335 0.293 0.240215 - 1.073 0.857 0.647 0.536 0.386 0.362 0.340 0.298 0.244220 - 1.092 0.874 0.659 0.551 0.392 0.367 0.345 0.302 0.248225 - - 0.891 0.672 0.566 0.398 0.373 0.350 0.307 0.253230 - - 0.908 0.684 0.581 0.404 0.378 0.356 0.312 0.257235 - - 0.925 0.696 0.596 0.410 0.384 0.361 0.316 0.261240 - - 0.942 0.709 0.610 0.416 0.389 0.366 0.321 0.265245 - - 0.959 0.721 0.625 0.422 0.394 0.371 0.326 0.270250 - - 0.976 0.733 0.640 0.428 0.400 0.376 0.330 0.274255 - - 0.993 0.746 0.655 0.434 0.405 0.381 0.335 0.278260 - - 1.010 0.758 0.670 0.440 0.411 0.386 0.339 0.282265 - - 1.027 0.776 0.684 0.446 0.416 0.391 0.344 0.286270 - - 1.044 0.801 0.699 0.452 0.422 0.396 0.349 0.291275 - - 1.061 0.826 0.714 0.458 0.427 0.402 0.353 0.295280 - - 1.078 0.851 0.729 0.471 0.433 0.407 0.358 0.299285 - - 1.095 0.876 0.744 0.498 0.438 0.412 0.363 0.303290 - - - 0.901 0.758 0.525 0.443 0.417 0.367 0.308295 - - - 0.926 0.775 0.553 0.449 0.422 0.372 0.312300 - - - 0.951 0.793 0.580 0.454 0.427 0.377 0.316305 - - - 0.976 0.812 0.608 0.460 0.432 0.381 0.320310 - - - 1.001 0.830 0.635 0.481 0.437 0.386 0.325315 - - - 1.026 0.848 0.662 0.514 0.443 0.390 0.329320 - - - 1.051 0.866 0.690 0.547 0.448 0.395 0.333325 - - - 1.076 0.884 0.717 0.580 0.453 0.400 0.337

Table 3: I-Section Beams 45 Minutes

Thickness (mm) Required for a Design Temperature of

Page 6: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 6 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table applies to three sided beams with a concrete slab. Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 620°C 650°C 700°C 750°C30 - 0.522 0.422 0.365 0.315 0.274 0.260 0.239 0.202 0.19735 - 0.522 0.422 0.365 0.315 0.274 0.260 0.239 0.202 0.19740 - 0.522 0.422 0.365 0.315 0.274 0.260 0.239 0.202 0.19745 - 0.522 0.422 0.365 0.315 0.274 0.260 0.239 0.202 0.19750 - 0.522 0.422 0.365 0.315 0.274 0.260 0.239 0.202 0.19755 - 0.522 0.422 0.365 0.315 0.274 0.260 0.239 0.202 0.19760 - 0.562 0.453 0.386 0.330 0.286 0.271 0.249 0.210 0.19765 - 0.601 0.484 0.406 0.346 0.298 0.282 0.259 0.219 0.19770 - 0.641 0.515 0.427 0.362 0.311 0.293 0.268 0.227 0.20175 - 0.681 0.546 0.447 0.377 0.323 0.304 0.278 0.235 0.20680 - 0.720 0.576 0.469 0.393 0.335 0.315 0.288 0.244 0.21285 - 0.760 0.607 0.495 0.408 0.347 0.326 0.297 0.252 0.21790 - 0.789 0.638 0.520 0.424 0.359 0.337 0.307 0.260 0.22395 - 0.817 0.669 0.546 0.440 0.371 0.348 0.317 0.269 0.228100 - 0.845 0.700 0.571 0.455 0.383 0.359 0.326 0.277 0.233105 - 0.873 0.731 0.596 0.473 0.395 0.370 0.336 0.285 0.239110 - 0.901 0.762 0.622 0.492 0.408 0.381 0.346 0.294 0.244115 - 0.930 0.782 0.647 0.512 0.420 0.392 0.355 0.302 0.250120 - 0.958 0.801 0.673 0.531 0.432 0.403 0.365 0.310 0.255125 - 0.986 0.820 0.698 0.550 0.444 0.414 0.375 0.319 0.261130 - 1.014 0.839 0.723 0.569 0.456 0.425 0.384 0.327 0.266135 - 1.042 0.858 0.749 0.589 0.468 0.436 0.394 0.335 0.271140 - 1.070 0.877 0.771 0.608 0.480 0.447 0.404 0.344 0.277145 - 1.098 0.896 0.786 0.627 0.492 0.458 0.413 0.352 0.282150 - - 0.915 0.802 0.647 0.504 0.470 0.423 0.360 0.288155 - - 0.934 0.817 0.666 0.516 0.482 0.433 0.369 0.293160 - - 0.953 0.833 0.685 0.527 0.494 0.442 0.377 0.299165 - - 0.972 0.848 0.704 0.539 0.507 0.452 0.385 0.304170 - - 0.991 0.864 0.724 0.551 0.519 0.462 0.394 0.309175 - - 1.010 0.879 0.743 0.563 0.532 0.475 0.402 0.315180 - - 1.029 0.895 0.762 0.575 0.544 0.489 0.410 0.320185 - - 1.048 0.910 0.779 0.587 0.557 0.502 0.419 0.326190 - - 1.067 0.926 0.794 0.599 0.569 0.516 0.427 0.331195 - - 1.086 0.941 0.810 0.611 0.581 0.529 0.435 0.336200 - - - 0.957 0.826 0.623 0.594 0.543 0.444 0.342205 - - - 0.972 0.842 0.635 0.606 0.556 0.452 0.347210 - - - 0.988 0.857 0.647 0.619 0.570 0.460 0.353215 - - - 1.003 0.873 0.658 0.631 0.583 0.474 0.358220 - - - 1.019 0.889 0.670 0.644 0.597 0.489 0.364225 - - - 1.034 0.905 0.682 0.656 0.610 0.504 0.369230 - - - 1.050 0.921 0.694 0.668 0.624 0.519 0.374235 - - - 1.065 0.936 0.706 0.681 0.637 0.534 0.380240 - - - 1.081 0.952 0.718 0.693 0.651 0.549 0.385245 - - - 1.096 0.968 0.730 0.706 0.664 0.564 0.391250 - - - - 0.984 0.742 0.718 0.678 0.579 0.396255 - - - - 1.000 0.754 0.731 0.691 0.594 0.402260 - - - - 1.015 0.766 0.743 0.705 0.609 0.407265 - - - - 1.031 0.794 0.755 0.719 0.624 0.412270 - - - - 1.047 0.823 0.771 0.732 0.639 0.418275 - - - - 1.063 0.851 0.796 0.746 0.654 0.423280 - - - - 1.079 0.879 0.821 0.759 0.669 0.429285 - - - - 1.094 0.907 0.846 0.776 0.684 0.434290 - - - - - 0.935 0.871 0.796 0.699 0.440295 - - - - - 0.963 0.896 0.816 0.714 0.445300 - - - - - 0.992 0.921 0.836 0.729 0.450305 - - - - - 1.020 0.946 0.855 0.744 0.456310 - - - - - 1.048 0.971 0.875 0.759 0.461315 - - - - - 1.076 0.996 0.895 0.774 0.491320 - - - - - - 1.021 0.915 0.789 0.525325 - - - - - - 1.046 0.935 0.804 0.559

Table 4: I-Section Beams 60 Minutes

Thickness (mm) Required for a Design Temperature of

Page 7: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 7 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table applies to three sided beams with a concrete slab. Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 620°C 650°C 700°C 750°C30 - - 0.550 0.466 0.383 0.361 0.344 0.323 0.282 0.23535 - - 0.550 0.466 0.383 0.361 0.344 0.323 0.282 0.23540 - - 0.550 0.466 0.383 0.361 0.344 0.323 0.282 0.23545 - - 0.550 0.466 0.383 0.361 0.344 0.323 0.282 0.23550 - - 0.550 0.466 0.383 0.361 0.344 0.323 0.282 0.23555 - - 0.550 0.466 0.383 0.361 0.344 0.323 0.282 0.23560 - - 0.593 0.501 0.416 0.379 0.361 0.338 0.293 0.24565 - - 0.635 0.535 0.449 0.398 0.378 0.352 0.305 0.25570 - - 0.677 0.570 0.482 0.417 0.395 0.367 0.316 0.26575 - - 0.719 0.605 0.513 0.436 0.412 0.381 0.327 0.27580 - - 0.761 0.640 0.543 0.454 0.429 0.395 0.338 0.28485 - - 0.793 0.675 0.573 0.478 0.446 0.410 0.350 0.29490 - - 0.824 0.710 0.604 0.505 0.463 0.424 0.361 0.30495 - - 0.855 0.745 0.634 0.531 0.489 0.439 0.372 0.314100 - - 0.886 0.774 0.664 0.558 0.514 0.453 0.383 0.323105 - - 0.918 0.794 0.695 0.585 0.539 0.467 0.394 0.333110 - - 0.949 0.814 0.725 0.612 0.565 0.481 0.406 0.343115 - - 0.980 0.834 0.755 0.639 0.590 0.494 0.417 0.353120 - - 1.011 0.854 0.776 0.665 0.615 0.508 0.428 0.362125 - - 1.042 0.874 0.793 0.692 0.641 0.521 0.439 0.372130 - - 1.073 0.894 0.810 0.719 0.666 0.535 0.450 0.382135 - - - 0.914 0.827 0.746 0.691 0.548 0.462 0.392140 - - - 0.935 0.843 0.769 0.716 0.562 0.474 0.401145 - - - 0.955 0.860 0.783 0.742 0.575 0.486 0.411150 - - - 0.975 0.877 0.797 0.766 0.588 0.498 0.421155 - - - 0.995 0.894 0.811 0.780 0.602 0.510 0.431160 - - - 1.015 0.910 0.825 0.793 0.615 0.522 0.440165 - - - 1.035 0.927 0.840 0.807 0.629 0.534 0.450170 - - - 1.055 0.944 0.854 0.821 0.642 0.546 0.460175 - - - 1.075 0.961 0.868 0.834 0.656 0.558 0.473180 - - - 1.096 0.977 0.882 0.848 0.669 0.570 0.487185 - - - - 0.994 0.896 0.862 0.683 0.582 0.501190 - - - - 1.011 0.910 0.875 0.696 0.594 0.515195 - - - - 1.028 0.924 0.889 0.709 0.606 0.529200 - - - - 1.044 0.939 0.902 0.723 0.618 0.543205 - - - - 1.061 0.953 0.916 0.736 0.630 0.557210 - - - - 1.078 0.967 0.930 0.750 0.642 0.571215 - - - - 1.094 0.981 0.943 0.763 0.654 0.585220 - - - - - 0.995 0.957 0.786 0.666 0.599225 - - - - - 1.009 0.971 0.810 0.678 0.613230 - - - - - 1.023 0.984 0.834 0.690 0.627235 - - - - - 1.037 0.998 0.859 0.702 0.640240 - - - - - 1.052 1.012 0.883 0.714 0.654245 - - - - - 1.066 1.025 0.907 0.726 0.668250 - - - - - 1.080 1.039 0.931 0.738 0.682255 - - - - - 1.094 1.052 0.955 0.750 0.696260 - - - - - - 1.066 0.980 0.762 0.710265 - - - - - - 1.080 1.004 0.785 0.724270 - - - - - - 1.093 1.028 0.814 0.738275 - - - - - - - 1.052 0.842 0.752280 - - - - - - - 1.077 0.870 0.766285 - - - - - - - 1.101 0.898 0.785290 - - - - - - - - 0.926 0.803295 - - - - - - - - 0.954 0.821300 - - - - - - - - 0.983 0.839305 - - - - - - - - 1.011 0.857310 - - - - - - - - 1.039 0.875315 - - - - - - - - 1.067 0.893320 - - - - - - - - 1.095 0.911325 - - - - - - - - - 0.930

Table 5: I-Section Beams 75 Minutes

Thickness (mm) Required for a Design Temperature of

Page 8: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 8 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table applies to three sided beams with a concrete slab. Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 620°C 650°C 700°C 750°C30 - - - 0.580 0.498 0.433 0.410 0.382 0.359 0.31035 - - - 0.580 0.498 0.433 0.410 0.382 0.359 0.31040 - - - 0.580 0.498 0.433 0.410 0.382 0.359 0.31045 - - - 0.580 0.498 0.433 0.410 0.382 0.359 0.31050 - - - 0.580 0.498 0.433 0.410 0.382 0.359 0.31055 - - - 0.580 0.498 0.433 0.410 0.382 0.359 0.31060 - - - 0.624 0.538 0.468 0.442 0.409 0.374 0.32265 - - - 0.669 0.577 0.502 0.474 0.437 0.390 0.33570 - - - 0.714 0.616 0.537 0.507 0.465 0.406 0.34775 - - - 0.758 0.656 0.571 0.539 0.494 0.421 0.36080 - - - 0.800 0.695 0.606 0.572 0.522 0.437 0.37285 - - - 0.840 0.735 0.640 0.604 0.551 0.453 0.38590 - - - 0.881 0.771 0.674 0.636 0.580 0.472 0.39795 - - - 0.922 0.795 0.709 0.669 0.609 0.497 0.410100 - - - 0.963 0.819 0.743 0.701 0.638 0.522 0.422105 - - - 1.004 0.842 0.772 0.733 0.667 0.547 0.435110 - - - 1.045 0.866 0.790 0.765 0.696 0.571 0.447115 - - - 1.086 0.890 0.808 0.783 0.725 0.596 0.460120 - - - - 0.914 0.827 0.801 0.754 0.621 0.472125 - - - - 0.938 0.845 0.819 0.776 0.646 0.483130 - - - - 0.962 0.863 0.836 0.793 0.670 0.495135 - - - - 0.986 0.882 0.854 0.810 0.695 0.506140 - - - - 1.010 0.900 0.872 0.827 0.720 0.518145 - - - - 1.034 0.918 0.889 0.845 0.745 0.529150 - - - - 1.058 0.937 0.907 0.862 0.768 0.541155 - - - - 1.082 0.955 0.925 0.879 0.781 0.553160 - - - - - 0.973 0.942 0.897 0.795 0.564165 - - - - - 0.992 0.960 0.914 0.809 0.576170 - - - - - 1.010 0.978 0.931 0.823 0.587175 - - - - - 1.028 0.996 0.949 0.837 0.599180 - - - - - 1.046 1.013 0.966 0.850 0.611185 - - - - - 1.065 1.031 0.983 0.864 0.622190 - - - - - 1.083 1.049 1.001 0.878 0.634195 - - - - - 1.101 1.066 1.018 0.892 0.645200 - - - - - - 1.084 1.035 0.906 0.657205 - - - - - - 1.102 1.052 0.920 0.669210 - - - - - - - 1.070 0.933 0.680215 - - - - - - - 1.087 0.947 0.692220 - - - - - - - - 0.961 0.703225 - - - - - - - - 0.975 0.715230 - - - - - - - - 0.989 0.727235 - - - - - - - - 1.003 0.738240 - - - - - - - - 1.016 0.750245 - - - - - - - - 1.030 0.761250 - - - - - - - - 1.044 0.790255 - - - - - - - - 1.058 0.827260 - - - - - - - - 1.072 0.863265 - - - - - - - - 1.086 0.900270 - - - - - - - - 1.099 0.936275 - - - - - - - - - 0.973280 - - - - - - - - - 1.009285 - - - - - - - - - 1.046290 - - - - - - - - - 1.082

Thickness (mm) Required for a Design Temperature of

Table 6: I-Section Beams 90 Minutes

Page 9: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 9 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table Continued Overleaf

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C30 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19735 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19740 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19745 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19750 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19755 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19760 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19765 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19770 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19775 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19780 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19785 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19790 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.19795 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197100 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197105 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197110 0.201 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197115 0.206 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197120 0.212 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197125 0.218 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197130 0.223 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197135 0.229 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197140 0.235 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197145 0.240 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197150 0.246 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197155 0.252 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197160 0.257 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197165 0.263 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197170 0.269 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197175 0.274 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197180 0.280 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197185 0.286 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197190 0.291 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197195 0.297 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197200 0.303 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197205 0.309 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197210 0.314 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197215 0.320 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197220 0.326 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197225 0.331 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197230 0.337 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197235 0.343 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197240 0.348 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197245 0.354 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197250 0.360 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197255 0.365 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197260 0.371 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197265 0.377 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197270 0.382 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197275 0.388 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197280 0.394 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197285 0.399 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197

Table 7: I-Section Columns 15 Minutes

Thickness (mm) Required for a Design Temperature of

Page 10: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 10 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Table Continued

Thickness is intumescent only. Results also apply to beams with 4-side fire exposure subject to

maximum DFT of 1.103mm.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C290 0.405 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197295 0.411 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197300 0.416 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197305 0.422 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197310 0.428 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197315 0.434 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197320 0.439 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197325 0.445 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197330 0.451 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197335 0.456 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197340 0.462 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197345 0.468 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197350 0.473 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197355 0.479 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197360 0.485 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197365 0.490 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197370 0.496 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197375 0.503 0.202 0.197 0.197 0.197 0.197 0.197 0.197 0.197380 0.512 0.213 0.197 0.197 0.197 0.197 0.197 0.197 0.197385 0.520 0.225 0.197 0.197 0.197 0.197 0.197 0.197 0.197390 0.529 0.237 0.197 0.197 0.197 0.197 0.197 0.197 0.197395 0.538 0.249 0.197 0.197 0.197 0.197 0.197 0.197 0.197

Table 7 (continued): I-Section Columns 15 Minutes

Thickness (mm) Required for a Design Temperature of

Page 11: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 11 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table Continued Overleaf

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C30 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19735 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19740 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19745 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19750 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19755 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19760 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19765 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19770 0.335 0.243 0.199 0.197 0.197 0.197 0.197 0.197 0.19775 0.346 0.251 0.206 0.197 0.197 0.197 0.197 0.197 0.19780 0.357 0.259 0.213 0.197 0.197 0.197 0.197 0.197 0.19785 0.368 0.268 0.220 0.197 0.197 0.197 0.197 0.197 0.19790 0.379 0.276 0.227 0.197 0.197 0.197 0.197 0.197 0.19795 0.390 0.284 0.234 0.197 0.197 0.197 0.197 0.197 0.197100 0.401 0.292 0.240 0.201 0.197 0.197 0.197 0.197 0.197105 0.412 0.300 0.247 0.207 0.197 0.197 0.197 0.197 0.197110 0.423 0.308 0.254 0.213 0.197 0.197 0.197 0.197 0.197115 0.434 0.316 0.261 0.219 0.197 0.197 0.197 0.197 0.197120 0.445 0.324 0.268 0.225 0.197 0.197 0.197 0.197 0.197125 0.456 0.332 0.275 0.231 0.197 0.197 0.197 0.197 0.197130 0.467 0.340 0.282 0.237 0.197 0.197 0.197 0.197 0.197135 0.478 0.348 0.289 0.243 0.197 0.197 0.197 0.197 0.197140 0.489 0.356 0.296 0.249 0.197 0.197 0.197 0.197 0.197145 0.505 0.364 0.302 0.255 0.197 0.197 0.197 0.197 0.197150 0.634 0.372 0.309 0.261 0.197 0.197 0.197 0.197 0.197155 0.668 0.380 0.316 0.267 0.197 0.197 0.197 0.197 0.197160 0.687 0.389 0.323 0.273 0.197 0.197 0.197 0.197 0.197165 0.706 0.397 0.330 0.280 0.197 0.197 0.197 0.197 0.197170 0.725 0.405 0.337 0.286 0.197 0.197 0.197 0.197 0.197175 0.744 0.413 0.344 0.292 0.197 0.197 0.197 0.197 0.197180 0.763 0.421 0.351 0.298 0.197 0.197 0.197 0.197 0.197185 0.781 0.429 0.357 0.304 0.197 0.197 0.197 0.197 0.197190 0.800 0.437 0.364 0.310 0.197 0.197 0.197 0.197 0.197195 0.819 0.445 0.371 0.316 0.197 0.197 0.197 0.197 0.197200 0.838 0.453 0.378 0.322 0.197 0.197 0.197 0.197 0.197205 0.857 0.461 0.385 0.328 0.197 0.197 0.197 0.197 0.197210 0.876 0.469 0.392 0.334 0.197 0.197 0.197 0.197 0.197215 0.894 0.477 0.399 0.340 0.197 0.197 0.197 0.197 0.197220 0.913 0.485 0.406 0.346 0.197 0.197 0.197 0.197 0.197225 0.932 0.493 0.412 0.352 0.197 0.197 0.197 0.197 0.197230 0.951 0.503 0.419 0.358 0.197 0.197 0.197 0.197 0.197235 0.970 0.514 0.426 0.365 0.197 0.197 0.197 0.197 0.197240 0.989 0.525 0.433 0.371 0.197 0.197 0.197 0.197 0.197245 1.008 0.537 0.440 0.377 0.197 0.197 0.197 0.197 0.197250 1.026 0.548 0.447 0.383 0.197 0.197 0.197 0.197 0.197255 1.045 0.560 0.454 0.389 0.197 0.197 0.197 0.197 0.197260 1.064 0.571 0.461 0.395 0.197 0.197 0.197 0.197 0.197265 1.083 0.582 0.468 0.401 0.197 0.197 0.197 0.197 0.197270 1.102 0.594 0.474 0.407 0.197 0.197 0.197 0.197 0.197275 1.120 0.605 0.481 0.413 0.197 0.197 0.197 0.197 0.197280 1.133 0.617 0.488 0.419 0.204 0.197 0.197 0.197 0.197285 1.145 0.628 0.495 0.425 0.216 0.197 0.197 0.197 0.197

Table 8: I-Section Columns 30 Minutes

Thickness (mm) Required for a Design Temperature of

Page 12: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 12 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Table Continued

Thickness is intumescent only. Results also apply to beams with 4-side fire exposure subject to

maximum DFT of 1.103mm.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C290 1.157 0.640 0.502 0.431 0.228 0.197 0.197 0.197 0.197295 1.170 0.651 0.509 0.437 0.239 0.197 0.197 0.197 0.197300 1.182 0.681 0.516 0.443 0.251 0.197 0.197 0.197 0.197305 1.194 0.713 0.523 0.450 0.263 0.197 0.197 0.197 0.197310 1.207 0.744 0.530 0.456 0.274 0.197 0.197 0.197 0.197315 1.219 0.776 0.537 0.462 0.286 0.197 0.197 0.197 0.197320 1.231 0.807 0.545 0.468 0.298 0.197 0.197 0.197 0.197325 1.244 0.839 0.552 0.474 0.309 0.197 0.197 0.197 0.197330 1.256 0.871 0.559 0.480 0.321 0.197 0.197 0.197 0.197335 1.268 0.902 0.566 0.486 0.332 0.197 0.197 0.197 0.197340 1.281 0.934 0.573 0.492 0.344 0.197 0.197 0.197 0.197345 1.293 0.966 0.580 0.498 0.356 0.197 0.197 0.197 0.197350 1.305 0.997 0.587 0.504 0.367 0.197 0.197 0.197 0.197355 1.318 1.029 0.594 0.509 0.379 0.197 0.197 0.197 0.197360 - 1.061 0.601 0.515 0.391 0.197 0.197 0.197 0.197365 - 1.092 0.608 0.521 0.402 0.197 0.197 0.197 0.197370 - 1.122 0.615 0.526 0.414 0.197 0.197 0.197 0.197375 - 1.136 0.622 0.532 0.426 0.197 0.197 0.197 0.197380 - 1.150 0.630 0.538 0.437 0.197 0.197 0.197 0.197385 - 1.165 0.637 0.543 0.449 0.197 0.197 0.197 0.197390 - 1.179 0.644 0.549 0.460 0.197 0.197 0.197 0.197395 - 1.193 0.651 0.555 0.472 0.197 0.197 0.197 0.197

Table 8 (continued): I-Section Columns 30 Minutes

Thickness (mm) Required for a Design Temperature of

Page 13: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 13 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table Continued Overleaf

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C30 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19735 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19740 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19745 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19750 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19755 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19760 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19765 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19770 0.525 0.411 0.323 0.259 0.214 0.197 0.197 0.197 0.19775 0.563 0.427 0.334 0.267 0.222 0.204 0.197 0.197 0.19780 0.601 0.443 0.344 0.276 0.230 0.211 0.197 0.197 0.19785 0.638 0.459 0.355 0.284 0.238 0.219 0.197 0.197 0.19790 0.671 0.475 0.365 0.293 0.247 0.226 0.200 0.197 0.19795 0.700 0.492 0.376 0.301 0.255 0.234 0.207 0.197 0.197100 0.729 0.516 0.386 0.310 0.263 0.241 0.214 0.197 0.197105 0.758 0.548 0.397 0.318 0.271 0.248 0.220 0.197 0.197110 0.787 0.579 0.407 0.326 0.279 0.256 0.227 0.197 0.197115 0.817 0.611 0.418 0.335 0.287 0.263 0.233 0.197 0.197120 0.846 0.643 0.428 0.343 0.295 0.271 0.240 0.197 0.197125 0.875 0.667 0.439 0.352 0.303 0.278 0.247 0.197 0.197130 0.904 0.688 0.449 0.360 0.311 0.286 0.253 0.197 0.197135 0.933 0.710 0.460 0.369 0.320 0.293 0.260 0.197 0.197140 0.963 0.731 0.470 0.377 0.328 0.301 0.267 0.197 0.197145 0.992 0.752 0.481 0.386 0.336 0.308 0.273 0.197 0.197150 1.021 0.773 0.491 0.394 0.344 0.316 0.280 0.197 0.197155 1.050 0.795 0.505 0.402 0.352 0.323 0.286 0.197 0.197160 1.079 0.816 0.527 0.411 0.360 0.331 0.293 0.197 0.197165 1.109 0.837 0.548 0.419 0.368 0.338 0.300 0.197 0.197170 1.133 0.859 0.570 0.428 0.376 0.346 0.306 0.197 0.197175 1.153 0.880 0.591 0.436 0.384 0.353 0.313 0.197 0.197180 1.174 0.901 0.613 0.445 0.392 0.361 0.320 0.197 0.197185 1.194 0.922 0.635 0.453 0.401 0.368 0.326 0.205 0.197190 1.215 0.944 0.657 0.462 0.409 0.376 0.333 0.214 0.197195 1.235 0.965 0.682 0.470 0.417 0.383 0.340 0.222 0.197200 1.256 0.986 0.707 0.478 0.425 0.391 0.346 0.230 0.197205 1.276 1.008 0.732 0.487 0.433 0.398 0.353 0.239 0.197210 1.297 1.029 0.757 0.495 0.441 0.406 0.359 0.247 0.197215 1.317 1.050 0.782 0.505 0.449 0.413 0.366 0.255 0.197220 1.338 1.071 0.807 0.516 0.457 0.420 0.373 0.264 0.197225 - 1.093 0.832 0.528 0.465 0.428 0.379 0.272 0.197230 - 1.114 0.857 0.539 0.473 0.435 0.386 0.280 0.197235 - 1.135 0.882 0.550 0.482 0.443 0.393 0.289 0.197240 - 1.157 0.907 0.561 0.490 0.450 0.399 0.297 0.197245 - 1.178 0.932 0.572 0.498 0.458 0.406 0.305 0.197250 - 1.200 0.957 0.583 0.504 0.465 0.413 0.314 0.197255 - 1.221 0.982 0.595 0.511 0.473 0.419 0.322 0.197260 - 1.242 1.007 0.606 0.517 0.480 0.426 0.330 0.197265 - 1.264 1.032 0.617 0.524 0.488 0.432 0.338 0.197270 - 1.285 1.057 0.628 0.530 0.495 0.439 0.347 0.197275 - 1.307 1.082 0.639 0.537 0.502 0.446 0.355 0.197280 - 1.328 1.107 0.651 0.543 0.508 0.452 0.363 0.197285 - 1.349 1.129 0.683 0.550 0.513 0.459 0.372 0.197

Table 9: I-Section Columns 45 Minutes

Thickness (mm) Required for a Design Temperature of

Page 14: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 14 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Table Continued

Thickness is intumescent only. Results also apply to beams with 4-side fire exposure subject to

maximum DFT of 1.103mm.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C290 - - 1.147 0.719 0.556 0.519 0.466 0.380 0.197295 - - 1.165 0.756 0.563 0.525 0.472 0.388 0.197300 - - 1.182 0.792 0.569 0.531 0.479 0.397 0.197305 - - 1.200 0.828 0.576 0.536 0.485 0.405 0.197310 - - 1.218 0.864 0.582 0.542 0.492 0.413 0.197315 - - 1.236 0.900 0.589 0.548 0.499 0.422 0.197320 - - 1.254 0.936 0.595 0.554 0.504 0.430 0.197325 - - 1.272 0.972 0.602 0.560 0.509 0.438 0.197330 - - 1.290 1.008 0.608 0.565 0.514 0.447 0.197335 - - 1.308 1.045 0.615 0.571 0.520 0.455 0.197340 - - 1.326 1.081 0.621 0.577 0.525 0.463 0.197345 - - 1.344 1.117 0.628 0.583 0.530 0.472 0.197350 - - - 1.148 0.634 0.588 0.535 0.480 0.197355 - - - 1.179 0.641 0.594 0.540 0.488 0.197360 - - - 1.209 0.647 0.600 0.545 0.497 0.197365 - - - 1.240 0.669 0.606 0.551 0.502 0.197370 - - - 1.271 0.734 0.611 0.556 0.506 0.197375 - - - 1.301 0.798 0.617 0.561 0.511 0.197380 - - - 1.332 0.862 0.623 0.566 0.515 0.197385 - - - - 0.927 0.629 0.571 0.519 0.197390 - - - - 0.991 0.634 0.576 0.524 0.230395 - - - - 1.055 0.640 0.582 0.528 0.267

Table 9 (continued): I-Section Columns 45 Minutes

Thickness (mm) Required for a Design Temperature of

Page 15: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 15 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Table Continued Overleaf

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C30 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19735 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19740 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19745 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19750 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19755 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19760 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19765 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19770 1.111 0.480 0.469 0.385 0.320 0.281 0.233 0.203 0.19775 1.130 0.551 0.487 0.400 0.332 0.291 0.243 0.212 0.19780 1.149 0.621 0.505 0.415 0.344 0.301 0.253 0.221 0.19785 1.168 0.691 0.533 0.430 0.355 0.311 0.262 0.230 0.20090 1.187 0.740 0.561 0.445 0.367 0.321 0.272 0.239 0.20895 1.206 0.788 0.589 0.460 0.379 0.331 0.282 0.248 0.216100 1.226 0.836 0.617 0.476 0.391 0.340 0.291 0.257 0.224105 1.245 0.885 0.646 0.491 0.403 0.350 0.301 0.266 0.232110 1.264 0.933 0.670 0.511 0.415 0.360 0.311 0.275 0.239115 1.283 0.981 0.694 0.537 0.427 0.370 0.320 0.284 0.247120 1.302 1.030 0.718 0.563 0.439 0.380 0.330 0.293 0.255125 1.321 1.078 0.741 0.589 0.451 0.390 0.340 0.302 0.263130 - 1.121 0.765 0.615 0.463 0.400 0.349 0.311 0.271135 - 1.132 0.789 0.641 0.475 0.410 0.359 0.320 0.279140 - 1.143 0.812 0.665 0.487 0.420 0.369 0.329 0.287145 - 1.154 0.836 0.688 0.499 0.430 0.378 0.338 0.295150 - 1.165 0.860 0.711 0.520 0.439 0.388 0.347 0.303155 - 1.176 0.883 0.734 0.542 0.449 0.398 0.356 0.311160 - 1.187 0.907 0.757 0.564 0.459 0.407 0.365 0.319165 - 1.198 0.931 0.780 0.585 0.469 0.417 0.373 0.327170 - 1.209 0.954 0.803 0.607 0.479 0.427 0.382 0.335175 - 1.220 0.978 0.826 0.629 0.489 0.436 0.391 0.343180 - 1.231 1.002 0.849 0.651 0.499 0.446 0.400 0.351185 - 1.242 1.026 0.872 0.674 0.510 0.456 0.409 0.359190 - 1.253 1.049 0.895 0.698 0.521 0.465 0.418 0.367195 - 1.264 1.073 0.918 0.721 0.532 0.475 0.427 0.374200 - 1.275 1.097 0.941 0.745 0.543 0.485 0.436 0.382205 - 1.286 1.120 0.964 0.769 0.555 0.494 0.445 0.390210 - 1.297 1.153 0.987 0.792 0.566 0.503 0.454 0.398215 - - 1.186 1.010 0.816 0.577 0.511 0.463 0.406220 - - 1.218 1.033 0.840 0.588 0.519 0.472 0.414225 - - 1.251 1.056 0.863 0.599 0.527 0.481 0.422230 - - 1.283 1.079 0.887 0.611 0.535 0.490 0.430235 - - 1.316 1.102 0.911 0.622 0.543 0.499 0.438240 - - 1.349 1.126 0.934 0.633 0.551 0.505 0.446245 - - - 1.154 0.958 0.644 0.558 0.510 0.454250 - - - 1.181 0.982 0.663 0.566 0.516 0.462255 - - - 1.208 1.005 0.698 0.574 0.521 0.470260 - - - 1.236 1.029 0.733 0.582 0.527 0.478265 - - - 1.263 1.052 0.768 0.590 0.532 0.486270 - - - 1.291 1.076 0.803 0.598 0.538 0.494275 - - - 1.318 1.100 0.839 0.606 0.544 0.501280 - - - 1.346 1.123 0.874 0.614 0.549 0.505285 - - - - 1.144 0.909 0.622 0.555 0.510

Table 10: I-Section Columns 60 Minutes

Thickness (mm) Required for a Design Temperature of

Page 16: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 16 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Table Continued

Thickness is intumescent only. Results also apply to beams with 4-side fire exposure subject to

maximum DFT of 1.103mm.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 550°C 600°C 650°C 700°C 750°C290 - - - - 1.166 0.944 0.629 0.560 0.515295 - - - - 1.187 0.979 0.637 0.566 0.520300 - - - - 1.208 1.015 0.645 0.572 0.524305 - - - - 1.229 1.050 0.657 0.577 0.529310 - - - - 1.251 1.085 0.694 0.583 0.534315 - - - - 1.272 1.120 0.731 0.588 0.539320 - - - - 1.293 1.159 0.768 0.594 0.544325 - - - - 1.315 1.198 0.805 0.599 0.548330 - - - - - 1.237 0.842 0.605 0.553335 - - - - - 1.275 0.879 0.611 0.558340 - - - - - 1.314 0.916 0.616 0.563345 - - - - - 1.353 0.953 0.622 0.567350 - - - - - - 0.990 0.627 0.572355 - - - - - - 1.027 0.633 0.577360 - - - - - - 1.064 0.638 0.582365 - - - - - - 1.120 0.644 0.587370 - - - - - - 1.176 0.650 0.591375 - - - - - - 1.231 0.680 0.596380 - - - - - - 1.287 0.729 0.601385 - - - - - - 1.342 0.777 0.606390 - - - - - - - 0.826 0.611395 - - - - - - - 0.875 0.615

Table 10 (continued): I-Section Columns 60 Minutes

Thickness (mm) Required for a Design Temperature of

Page 17: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 17 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 520°C 550°C 600°C 650°C 700°C 750°C30 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16235 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16240 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16245 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16250 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16255 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16260 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16265 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16270 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16275 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16280 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16285 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16290 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16295 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162100 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162105 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162110 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162115 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162120 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162125 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162130 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162135 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162140 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162145 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162150 1.178 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162155 1.219 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162160 1.260 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162165 1.301 1.204 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162170 1.342 1.247 1.207 1.162 1.162 1.162 1.162 1.162 1.162 1.162175 1.383 1.289 1.253 1.208 1.188 1.162 1.162 1.162 1.162 1.162180 1.424 1.332 1.300 1.255 1.234 1.179 1.162 1.162 1.162 1.162185 1.465 1.375 1.347 1.303 1.280 1.220 1.162 1.162 1.162 1.162190 1.506 1.418 1.393 1.351 1.326 1.261 1.182 1.162 1.162 1.162195 1.547 1.461 1.440 1.398 1.372 1.302 1.212 1.162 1.162 1.162200 1.588 1.504 1.487 1.446 1.418 1.342 1.242 1.162 1.162 1.162205 1.629 1.547 1.533 1.494 1.464 1.383 1.271 1.162 1.162 1.162210 1.670 1.590 1.580 1.541 1.510 1.424 1.301 1.162 1.162 1.162215 1.771 1.633 1.627 1.589 1.556 1.465 1.331 1.162 1.162 1.162220 1.912 1.676 1.673 1.636 1.602 1.506 1.360 1.162 1.162 1.162225 2.054 1.814 1.812 1.684 1.648 1.547 1.390 1.162 1.162 1.162230 2.196 1.982 1.985 1.852 1.714 1.588 1.420 1.162 1.162 1.162235 2.337 2.158 2.158 2.025 1.886 1.629 1.449 1.162 1.162 1.162

Table 11: Hollow Column Sections 15 Minutes

Thickness (mm) Required for a Design Temperature of

Page 18: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 18 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 520°C 550°C 600°C 650°C 700°C 750°C30 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16235 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16240 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16245 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16250 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16255 1.163 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16260 1.231 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16265 1.298 1.184 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16270 1.365 1.256 1.162 1.162 1.162 1.162 1.162 1.162 1.162 1.16275 1.432 1.329 1.224 1.162 1.162 1.162 1.162 1.162 1.162 1.16280 1.499 1.401 1.309 1.162 1.162 1.162 1.162 1.162 1.162 1.16285 1.566 1.474 1.394 1.264 1.178 1.162 1.162 1.162 1.162 1.16290 1.633 1.546 1.479 1.370 1.295 1.162 1.162 1.162 1.162 1.16295 1.737 1.619 1.564 1.476 1.412 1.162 1.162 1.162 1.162 1.162100 1.974 1.708 1.649 1.583 1.529 1.304 1.162 1.162 1.162 1.162105 2.212 2.003 1.892 1.696 1.645 1.466 1.162 1.162 1.162 1.162110 2.450 2.299 2.258 2.117 1.984 1.627 1.162 1.162 1.162 1.162115 2.687 2.623 2.623 2.537 2.442 2.050 1.162 1.162 1.162 1.162120 2.989 2.989 2.989 2.958 2.900 2.621 1.328 1.162 1.162 1.162125 3.378 3.378 3.378 3.378 3.359 3.192 2.227 1.162 1.162 1.162130 - - - - - - 2.948 1.328 1.162 1.162135 - - - - - - - 2.293 1.162 1.162140 - - - - - - - 3.059 1.328 1.162145 - - - - - - - - 1.963 1.162150 - - - - - - - - 2.544 1.162155 - - - - - - - - 3.125 1.328160 - - - - - - - - - 1.776165 - - - - - - - - - 2.091170 - - - - - - - - - 2.406175 - - - - - - - - - 2.722180 - - - - - - - - - 3.037185 - - - - - - - - - 3.352

Table 12: Hollow Column Sections 30 Minutes

Thickness (mm) Required for a Design Temperature of

Page 19: CERTIFICATE OF APPROVAL No CF 5457€¦ · iii) Production surveillance under ISO 9001: 2008. iv) Inspection and surveillance of factory production control. v) Audit testing. 4. The

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5457 HEMPEL PAINTS (EMIRATIES) LLC

Page 19 of 19 Signed AH/012

Issued: 30th August 2016 Valid to: 29th August 2021

Hempacore AQ48860

Thickness is intumescent only.

Section Factor up

to m-1

350°C 400°C 450°C 500°C 520°C 550°C 600°C 650°C 700°C 750°C30 1.498 1.435 1.389 1.335 1.311 1.230 1.162 1.162 1.162 1.16235 1.498 1.435 1.389 1.335 1.311 1.230 1.162 1.162 1.162 1.16240 1.498 1.435 1.389 1.335 1.311 1.230 1.162 1.162 1.162 1.16245 1.498 1.435 1.389 1.335 1.311 1.230 1.162 1.162 1.162 1.16250 1.498 1.435 1.389 1.335 1.311 1.230 1.162 1.162 1.162 1.16255 1.589 1.524 1.479 1.429 1.406 1.328 1.162 1.162 1.162 1.16260 1.680 1.612 1.570 1.524 1.500 1.426 1.256 1.162 1.162 1.16265 1.870 1.720 1.661 1.619 1.594 1.524 1.365 1.162 1.162 1.16270 2.068 1.931 1.847 1.754 1.693 1.621 1.475 1.278 1.162 1.16275 2.265 2.142 2.070 1.988 1.934 1.772 1.584 1.402 1.162 1.16280 2.463 2.353 2.292 2.222 2.175 2.026 1.705 1.526 1.260 1.16285 2.660 2.564 2.515 2.457 2.417 2.280 1.990 1.650 1.409 1.16290 2.858 2.775 2.737 2.691 2.658 2.534 2.275 1.919 1.557 1.16295 3.055 2.986 2.960 2.925 2.899 2.788 2.559 2.245 1.737 1.328100 3.252 3.197 3.182 3.159 3.140 3.042 2.844 2.572 2.135 1.517105 3.450 3.407 3.405 3.393 3.381 3.296 3.129 2.898 2.534 1.746110 3.647 3.627 3.627 3.627 3.622 3.550 3.413 3.224 2.932 2.312115 - - - - - - - 3.551 3.331 2.879120 - - - - - - - - - 3.446

Table 13: Hollow Column Sections 45 Minutes

Thickness (mm) Required for a Design Temperature of