TWENTY NINE YEARS IN USE. And Counting.

THOUSANDS OF MILES LINED. And Counting.

NUMBER ONE INDUSTRY-WIDE. And Holding.

NOW AVAILABLE TO THE REST OF THE WATER MARKET.

COAT IT AND FORGET IT.

No matter what the project is, we know that painting

is the last thing you want to deal with. Now it’s the last

thing you’ll have to worry about. Ever again.

Announcing Induron’s breakthrough line of Ceramic

Epoxy Coatings. All built on the same backbone that’s

made our own Protecto 401™ the sanitary sewage

ductile iron pipe market’s coating of choice since

1981. All using the same proprietary technology

that’s coated literally thousands of miles of pipe

with no failure.

So give your projects—and your reputation—the

protection they deserve. Ask your Induron rep about

our new Ceramic Epoxies today.

REMINDER: Only Protecto-401™ is formulated specifically as a lining in ductile iron pipe and fittings used in sewer service.

INTRODUCING OUR REVOLUTIONARYNEW CERAMIC EPOXIES.

ABSOLUTE MINIMAL UNDERCUTTINGActually self-heals pinholes and spot corrosion. With A-Rated cathodic disbondment.

UNRIVALED FILM BUILDMinimize the risk of holidays, and improve edge protection, with up to 40 mils in a single coat.

ULTRA-LOW PERMEABILITYKeep corrosive liquids away from your substrate.

NON-ABLATIVE SURFACEInhibits microbiological contamination and prevents acidothiobacillus growth.

EVERY PRODUCT IN OUR CERAMIC EPOXY LINE OFFERS:

COUNT ON IT.

PERMASAFE 100 CERAMIC EPOXY

An immersion-grade lining formulated specifically for maximum corrosion protection of steel and

concrete substrates immersed in sewage—or exposed to similar aggressive environments.

100% volume solids

—Apply up to 40 mils in a single coat.

—20% Sulfuric Acid Immersion: NO EFFECT after 7,000 hours per ASTM D-714.

—25% Sodium Hydroxide Immersion: NO EFFECT after 7,000 hours per ASTM D-714.

—0.0 lbs/gal Hazardous Air Pollutants.

—Prohibits MIC contamination and does not allow growth of acidothiobacillus.

GOING GREEN HAS NEVER MADE MORE SENSE.WITH THESE SOLVENT-FREE CERAMIC EPOXY COATINGS:

PERMACLEAN 100 CERAMIC EPOXY

An immersion-grade lining for maximum corrosion protection of steel and concrete. Formulated

especially for potable water. Certified for cold end uses by the Water Quality Association for

potable water immersion service.

100% volume solids

—Apply up to 30 mils in a single coat.

—Suitable for potable water immersion in 72 hours

—UL/NSF Standard 61 approved for potable water immersion for 15-30 mils DFT.

—Distilled Water Immersion: NO EFFECT after 7,000 hours when rated using ASTM D-714.

—0.0 lbs/gal Hazardous Air Pollutants.

GOING GREEN HAS NEVER MADE MORE SENSE.

PERFORMANCE TEST (PERMASAFE & PERMACLEAN)

SYSTEM: One Coat @ 30 mils DFT

TEST METHOD DURATION RESULT

IMPACT RESISTANCE ASTM D-2794 7 days 80 inch-poundsRECOAT - 140º F, Elcometer ASTM D-4541 24 hours OKADHESION, X-Cut ASTM D-3359 7 days 5A5% SALT WATER @ 120º F IMMERSION 4,000 hours No Effect120º F WATER IMMERSION ASTM D-714 7,000 hours No Effect120º F 25% NaOH ASTM D-714 7,000 hours No Effect20% H2SO4 ASTM D-714 7,000 hours No Effect5% H2SO4 ASTM D-714 7,000 hours No EffectSALT SPRAY 5% NaCl ASTM B-117Non-scribed 4,000 hours No EffectScribed 4,000 hours 8 Rating

CERAMAPURE PL90 CERAMIC EPOXY

Formulated for the protection of ductile iron and steel pipe and fittings. Certified for cold end

uses by the Water Quality Association for potable water immersion service.

Ceramapure PL90 meets all NSF/ANSI International Standard 61 requirements for potable

water immersion service under the following conditions:

—Coating thickness of up to 30 mils (which can be applied in a single coat).

—Pipe diameters of four inches or larger.

PROTECT AGAINST THE REAL DANGER.HINT: IT’S NOT ACID. IT’S WATER.

PERFORMANCE TEST

SYSTEM: One Coat @ 30 mils DFT

TEST METHOD DURATION RESULT

Salt Spray ASTM B-117Scribed - 7 days 6,000 hours #9 Rating Unscribed - 7 days 7,200 hours No Effect

IMMERSION Tap Water - 7 days Cure Ambient 7,000 hours No EffectTap Water - 7 days Cure 120º F 7,000 hours No Effect5% H2SO4 Immersion-amb 4,800 hours No Effect20% H2SO4 Immersion-amb 4,800 hours No Effect

IMPACT RESISTANCEDirect ASTM D-2794 1 month 100 inch-poundsSalt Water 5% NaCl Immersion 7,200 hours No Effect

Recoat (pull-off) ASTM D-4541 800 psi - cohesiveAdhesion ASTM D-3359-A 7 days 5A

PERFORMANCE TEST

TEST RESULT

Taber Abrasion (ASTM D-4060) 0.195 gr. Avg. loss / 1000 cyclesPull-Off Adhesion (ASTM D-4541) 900 PSI @ Avg. of 4 pullsFreeze / Thaw (ASTM 3359, method A) Passed @ 10 cyclesFresh Water Immersion 8,500 hours with no effectDirect Impact (ASTM D-2704) 120 inch-poundsRecoatabil ity Pass after 9 months (with itself) @ 5A

CERAMAPURE TL70 CERAMIC EPOXY

Formulated for the protect ion of steel and concrete immersed in potable water.

Exceeds AIM and OTC VOC regulat ions with a conventional air less spray r ig.

Cert i f ied by the Water Qual i ty Associat ion for potable water immersion service.

—Apply in two coats at 10-15 dry mi ls per coat.

—Al lows for high bui ld appl icat ion, exceeding AIM and OTC regulat ions with a

conventional air less spray r ig.

LOOK BENEATH THE SURFACE.For complete product specifications and test data on our entireline of Induron’s ceramic epoxy coatings, call your rep today!

P.O. Box 2371 Birmingham, Alabama 35201-2371 (800) 324-9584 | induron.com