Centrifugal engine oil cleaners
2
Centrifugal engine oil cleaners Cleaner lubrication oil in combustion engines extends the life of engines, gives better performance and lower emission Micro-Separator centrifugal engine oil cleaners feature: Removes harmful dirt from engine oil Filtration to 5 μm and even below No insert filter Increased life of engine oil filter Extended oil change intervals (up to double the normal interval) Reduced oil and filter waste Better engine performance, less wear and lower emission Safeguarded against too low and too high pressure Applications: - Generator sets - Marine propulsion engines - Automotive - Transportation Logistics - Mining Dirt caught in the Micro-Separator MOC at extended service interval. This dirt would have normally ended up your engine and filters.
Transcript of Centrifugal engine oil cleaners
Centrifugal engine oil cleaners
Cleaner lubrication oil in combustion engines extends the life of engines, gives better performance and lower emission
Micro-Separator centrifugal engine oil cleaners feature:Removes harmful dirt from engine oil Filtration to 5 µm and even belowNo insert filter Increased life of engine oil filterExtended oil change intervals (up to double the normal interval)Reduced oil and filter waste Better engine performance, less wear and lower emissionSafeguarded against too low and too high pressure
Applications:- Generator sets- Marine propulsion engines- Automotive- Transportation Logistics- Mining
Dirt caught in the Micro-Separator MOC at extended service interval. This dirt would have normally ended up your engine and filters.
The Micro-Separator MOC principle: Oil enters the centrifuge from a line between engine oil pump and engine filter (T-Piece). Once this oil reaches a pressure of in between 2.5 and 6 bar, the internal valve opens and oil going through the nozzles of the centrifuge brings the rotor in motion (up to 6,000 rpm !). The centrifugal force ‘slings’ the oil against the inner wall of the rotor where the dirt in the lubrication oil sticks to this inner wall and the clean oil drains straight back to the engine by gravity. The remains on the inner wall form a dense ‘mud’ like substance which can easily be removed at the next service interval.
Analysis after installing a Micro-Separator Oil Centrifuge show that this dirt contains quantities of insolubles, soot, viscosity and wear metals, which would have normally ended up in the engine and engine filter.
Micro-Separator® Oil Centrifuges
model Dirt
holding capacity
Max sump capacity
Nominal flow rate
Height (mm)
Diameter Ø (mm)
Weight (Kg)
Price 2013 Application examples
MOC-20 0.2 ltr. 30 ltr 180 ltr/hr 152 103 1.35 € 226.00 CAT 3306 / 3406 / Komatsu S6D125
MOC-35 0.3 ltr. 40 ltr 250 ltr/hr 160 125 1.6 € 294.00 Cummins NT495/743/855
MOC-50 0.5 ltr. 65 ltr 400 ltr/hr 200 135 2.3 € 479.00 Cummins KTA1150 / KT19C / Detroit -60 / CAT-3412 / Volvo Penta-1614GE
MOC-60 0.6 ltr. 100 ltr 500 ltr/hr 230 140 3.5 € 592.00
MOC-90 1 ltr. 150 ltr 650 ltr/hr 260 150 3.5 € 633.00
MOC-200 2 ltr. 200 – 400 ltr
1200-1600 ltr/hr 343 203 13.5 € 1,714.00 CAT3512 / 3508 / YANMAR M220 / M200 / MAN B&W 5L SERIES
CUMMINS KTA 50-G9 / MTU 916V4000-G63
MOC-600 6 ltr. 500 – 1500 ltr
3000-4500 ltr/hr 500 292 30 € 2,937.00 MANB&W 6L,7L, 8L, 27/38H / CAT D966 / Yanmar TF240 /
6EY18AL / Sulzer / Wartsila WASA 32
