Central+Gas+Supply+Catalogue+Jan+31st+2008

Central Gas SupplyCutting and Welding

High Pressure Process High Flow - Laser

Medical

Edition 1/2008

1Edition 1/2008 - © GCE UK 2008

Central Gas Supply

1. Cutting and Welding Acetylene pressure control units ACE 11/19 2 Acetylene pressure control units ACE 12/25 4 Acetylene optional manifolds 5

High pressure manifolds - HP 50/70 6 High pressure manifolds - HP 250/400 8 Single Cylinder Couplers 17 Outlet Points 18 Manifold Regulators 19 Accessory HP 250/400 20 Diverse manifolds 22 High pressure - Bundle, shut-off and ball valves 23

MANIFLOW block for ACE and HP manifolds 25

Point-of-use units - Standard 26 Accessory for point-of-use units - Standard 27 Point-of-use units - High Flow 29 Accessory for Point-of-use units - High Flow 30

2. High Flow - Laser and Plasma Applications High Flow - Laser and Plasma Applications 31 Resonator Laser gas supply 37 Point-of-use units for Plasma Applications 43

3. Medical Applications Manifolds and Terminal units 44

4. Central Gas Supply Accessory Valves, hoses etc 45

5. Central Gas Supply Scheme Safety, Flexibility and Economy 50

6. Appendix Gas data 51 European Cylinder Connections 52 GCE world-wide 54

2 Edition 1/2008 - © GCE UK 2008

Cutting and Welding - Acetylene

Pressure control units ACE 11/19

Pressure control unit ACE 11/19

Basic version – up to 25 bar inlet pressure The unit can be used for cylinder- and bundle supply The system is provided with an automatic quick acting shut off device and a flashback arrestor

14 037 460 Pressure unit Acetylene 11/19 Quantity14 037 312 Valve block Manyflow Acetylene 10 783 250 Manifold regulator UC500-A 114 008 271 Flashback arrestor GVA 90 114 037 141 Ball valve ½“ with elbow 114 037 257 Plug with female nut W21,8 x 1/14“ 314 037 561 Automatic quick acting shut off device 114 037 562 Connector G3/4“ for automatic quick acting shut off device 114 016 986 O-Ring 23 x 12 x 2,5 NBR 70 214 037 056 Gasket 18 x 12 x 2,5 114 037 174 Steel tube Ø 22 x 1,5 x 100 1

The corresponding Acetylene high pressure hoses please look in chapter Central Gas Supply Accessory Pressure control unit can be configurated in according the necessary amount of cylinders or bundles

AcetyleneRated flow: 11 m³/h Max. flow: 19 m³/h Cylinder pressure: 25 barOutlet pressure: 1,5 bar


Pressure control unit ACE 11/19 Signal

Pressure control unit for Acetylene with inductive contact gauges (Ki) and Signalbox Suitable for use with cylinders and bundles The system is provided with an automatic quick acting shut off device and a flashback arrestor

14 037 556 Pressure unit Acetylene 11/19 Quantity14 037 312 Valve block Manyflow for Acetylene 10 783 250 Manifold regulator UC 500 A 114 008 271 Flashback arrestor (GVA 90 ½“) 114 037 141 Ball valve G½“ with elbow 1H28 318 519 Signalbox DGM-SK 02 EX 124 037 010 Contact gauge 114 037 302 Plug with swivel nut W 21,8 x 1/14“ 314 037 561 Automatic quick acting shut off device 114 037 562 Connector G3/4“ for automatic quick acting shut off device 114 016 986 O-Ring 23,3 x 2,4 NBR 70 114 037 056 Gasket 18 x 12 x 2,5 114 037 174 Steel tube Ø 22 x 1,5 x 100 1


Signalbox DGMLocate in safe area

3Edition 1/2008 - © GCE UK 2008

Pressure control unit ACE 11/19 for 1 cylinder/bundle

Pressure control unit without Manyflow Block for 1 bundle or 1 cylinder

14 037 553 Pressure control unit complete

Quantity14 037 561 Automatic quick acting shut off device 10 783 250 Manifold regulator UC 500 A 114 008 271 Flashback arrestor (GVA 90 ½“) 114 037 141 Ball valve G½“ with elbow 114 037 490 Connector G3/4“- W21,8 x 1/14“ for non return valve 114 037 159 Wall bracket 114 037 636 Pipe clamp No 2 114 037 470 Non return valve kit 114 037 174 Steel tube Ø 22 x 1,5 x 100 1





Pressure regulator ACE 11/19

Acetylene regulator for inlet pressure up to 25 bar, working pressure 1,5 bar Rated flow 11 m³/h, max flow 19 m³/h Diaphragm UC 500: EPDM rubber Inlet: M24X1,5 Outlet: G½”LH m

0 783 250 Manifold regulator Unicontrol UC 500 ACE

The graph shows the working pressure as a function of the flow of

gas for different inlet pressures

20

25

5

15

10

00 90 1008070602010

Unicontrol UC500 HD

504030

Ausgangsdruck p [bar]2

Durchfluß [m3/h]

p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

Unicontrol UC500 ACE

40

50

10

30

20

00 800700600200100

Unicontrol MR 60 12, 20, 50

500400300


p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

MR60 0732307

60

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

Durchfluß [m3/h]

Durchfluß [m3/h]

Durchfluß [m3/h]

Performance chart Unicontrol UC 500-ACE

W21,8x1/14“

Pressure p2 [bar]

Flow QN [Nm³/h]

4 Edition 1/2008 - © GCE UK 2008

Pressure control units ACE 12/25

Pressure control unit ACE 12/25

Basic unit for Acetylene up to 25 bar The units are provided with an automatic quick acting shut off device and flashback arrestor They are suitable for use with cylinders and bundles

14 037 549 Pressure control unit 12/25 complete Quantity14 037 312 Valve block Manyflow for acetylene 10 762 387 Manifold regulator MR 60 ACE 114 008 923 Flash back arrestor 12/25 114 037 562 Connector G3/4“ for automatic quick acting device 114 037 561 Automatic quick acting shut off device 114 016 986 O-Ring 23,3 x 2,4 NBR70 114 037 056 Gasket 18 x 12 x 2,5 114 037 302 Plug with swivel nut W 21,8 x 1/14“ 314 037 159 Wall bracket 114 037 636 Pipe clamp No 2 124 037 180 Ball valve with elbow MR 60 114 037 640 Adapter G1“ – Ø 22 mm 1548 201 033 046 Outlet MR 60 114 037 174 Steel tube Ø 22 x 1,5 x 100 1


20

25

5

15

10

00 90 1008070602010

Unicontrol UC500 HD

504030


Durchfluß [m3/h]

p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1


40

50

10

30

20

00 800700600200100


500400300


p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

MR60 0732307

60

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

Durchfluß [m3/h]

Durchfluß [m3/h]

Durchfluß [m3/h]




The graph shows the working pressure as a function of the flow of

gas for different inlet pressures

Manifold regulator ACE 12/25

Acetylene regulator for inlet pressure up to 25 bar, working pressure 1,5 bar Rated flow 12 m³/h, max flow 25 m³/h Inlet: M24X1,5 Outlet: tube fitting 18 mm internal, 20 3 mm external Other inlet threads acc to national standards on demand

Type Inlet0 762 387 Manifold regulator MR60 ACE M24x1,50 762 391 Manifold regulator MR 60 ACE G5/8 – LH

W21,8x1/14“

Performance chart

Pressure p2 [bar]

Flow QN [Nm³/h]

5Edition 1/2008 - © GCE UK 2008

Acetylene panel SMD/BMD 200-29

Panel to connect 1 cylinder (SMD) or 2 cylinders (BMD) With ball valve (decomposition tested) and flash back arrestor Serving as a first pressure stage of a central gas supply these gas panels together with contact gauges and signalling device allow an interruption free gas supply The change over from the emptied cylinder to the full one has to be done manually indicated by the alarm box acoustic/optic signal

Type Contact gauge4 037 065 SMD 200-2924 037 215 SMD 200-29 yes 24 037 213 BMD 200-2924 037 214 BMD 200-29 yes

The corresponding Acetylene high pressure hoses please look in chapter Central Gas Supply Accessory

Technical dataHousing: brass 2 0401 26Diaphragm: rubberFlow: up to 19 m³/h (pa = 1,26 bar)Working temperature: -20 to +60 °CDimensions (wxhxd): app 300 x 155 x app 160 mmWeight: 4,6 kg Inlet pressure gauge: bourdon gauge or contact gaugePress gauge range: 0 - 40 bar (inlet), 0 - 2,5 bar (outlet)Outlet safety valve: G 3/8“ l

SMD 200-29 BMD 200-29

1 Cylinder2 Cylinder valve3 Hose connection 4 Ball valve5 Pressure regulator6 Inlet pressure gauge7 Outlet pressure gauge8 Relief valve 9 Safety valve acc to german TRAC10 Non return valve



Acetylene - optional manifolds

BMD 200-29

SMD 200-29

Flow QN [Nm³/h]

6 Edition 1/2008 - © GCE UK 2008

Cutting and Welding - HIGH PRESSURE GASES

Manifolds - HP 50/70 Pressure control unit HP 50/70

For compressed gases – Basic version – up to 300 bar Suitable for use with cylinders and gas packages -

14 037 461 Pressure control unit 50/70 complete Quantity24 037 043 Ball valve ½“ with elbow 114 037 647 Fitting G½“ D = 22 mm 114 037 514 Valve block Manyflow compr gases 10 783 091 Manifold regulator UC500-HP-gases 114 037 302 Plug with swivel nut W21,8 x 1/14“ 3

For corresponding HP hoses please please see chapter “Accessory” Pressure units can be configurated in acc to the necessary number of cylinders or bundles

Pressure control unit HP 50/70 – Signal

For compressed gaes with inductive alarm gauge Ki and signal box, adjustable contact gauge on high pressure side Via signal box 2 entrance signals- and 2 exit signals can be processed (Exit signal: 230 V, 50 Hz)

14 037 552 Pressure control unit compl for compressed gases Quantity24 037 043 Ball valve ½“ with elbow 114 037 647 Fitting G½“ D = 22 mm 1 14 037 514 Valve block Manyflow compr gases 10 783 091 Manifold regulator UC500-HP-gases 1H 28 191 103 Inductive contact gauges 1 14 037 302 Plug with swivel nut W21,8 x 1/14“ 3 H 28 318 119 Signalbox DGM-SK 02 1 14 037 137 Brass tube Ø 22x 2x 100 1


HP gasesRated flow: 50 m³/h Max. flow: 70 m³/h Cylinder pressure: 300 barOutlet pressure: to 20 bar


Locate in safe area

W21,8x1/14“

W21,8x1/14“

7Edition 1/2008 - © GCE UK 2008

Single cylinder (bundle) unit HP 50/70

For 1 bundle or cylinder (compressed gases), without Manyflow block Inlet: W21,8x1/14”

14 037 554 Control unit HP 50/70-1 Quantity 14 037 555 Double nipple W21,8 x 1/14“ 1 24 037 043 Ball valve ½“ with elbow 1 14 037 647 Fitting G½“ D = 22 mm 10 783 091 Manifold regulator UC500-HP-Gases 114 037 159 Wall bracket 114 037 636 pipe clamp size 2 114 037 137 brass tube Ø 22x 2x 100 1


Pressure control unit 50/70

For use with 1 bundle or cylinder (compressed gases), without Manyflow block Diaphragm: EPDM, Valve seat: PA6 6 (Zytel) Other inlet threads acc to national standards on demand

Type Inlet0 783 091 Manifold regulator UC 500-HP W21,8x1/140 783 577 Manifold regulator UC 500 W30x2 – NEVOC



Performance chart Unicontrol UC 500-HP

20

25

5

15

10

00 90 1008070602010

Unicontrol UC500 HD

504030


Durchfluß [m3/h]

p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1


40

50

10

30

20

00 800700600200100


500400300


p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

MR60 0732307

60

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

Durchfluß [m3/h]

Durchfluß [m3/h]

Durchfluß [m3/h]


Pressure p2 [bar]

Flow QN [Nm³/h]

8 Edition 1/2008 - © GCE UK 2008


Manifold regulator MR 60 HP 250/400

Regulators provided with safety gauges in accordance with DIN EN 562 Materials: valve seat PA 6 6 (Zytel 103), diaphragm Butyl rubber Other inlet threads acc to national standards on demand

Gas Working pressure Inlet0 762 382 MR 60 HP compressed 20 bar W21,8x1/140 762 306 MR 60 Mi Mison 14 bar W21,8x1/140 762 329 MR 60 Ni Nitrogen 50 bar W24,32x 1/14

For the version 0 762 306 „Mison“ is used a stainless steel seat

HP gasesRated flow: 250 m³/h Max. flow: 400 m³/h Cylinder pressure: 300 barOutlet pressure to 20 bar

20

25

5

15

10

00 90 1008070602010

Unicontrol UC500 HD

504030


Durchfluß [m3/h]

p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1


40

50

10

30

20

00 800700600200100


500400300


p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

MR60 0732307

60

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

Durchfluß [m3/h]

Durchfluß [m3/h]

Durchfluß [m3/h]

Cutting and Welding - High pressure gases

Performance chart

Pressure p2 [bar]

Flow QN [Nm³/h]

Pressure control unit – HP 250/400

Complete for compressed gases – Basic version – up to 300 bar inlet pressure This unit is suitable for use with bundle and cylinder supply

14 037 560 Control unit for compressed gases HP 250/40014 037 557 for Mison (with regulator MR 60 0 762 306)14 037 558 for Nitrogen up to 50 bar working pressure Quantity 14 037 514 Valve block Manyflow compressed gases 1 14 037 257 Washer 18 x 12 x 2 1 0 762 382 Manifold regulator MR 60-HP 1 24 037 180 Elbow with ball valve MR 60 1 14 037 302 Plug with swivel nut W 21,8 x 1/14“ 3 14 037 137 Brass tube Ø 22x 2x 100 1

For corresponding HP hoses please please see chapter “Accessory” Pressure units can be configurated in acc to the necessary number of cylinders or bundles For Gas Preheaters please look at page 39

Manifolds - HP 250/400

9Edition 1/2008 - © GCE UK 2008

Manual Manifold Assembly Series 300

For inert gases: Oxygen, Air, Nitrogen, Helium, Argon, Ar/CO2 mixtures For flammable gases: Hydrogen, Methane, Hydrogen mixtures, Methane mixtures Service pressure maximum 300 bar

Manifold Assembly Details

Wall mounted manifold assembly - Cylinder securing restraints - Individual cylinder non-return valves - Bank isolation valves - High pressure header pipe work - Angle section frame

Design Features

Corrosion resistant wall mounted frame - Zinc-plated cylinder securing restraints - Dual seating non-return valves - Soft seat isolating valves - High strength high pressure header pipe work - Certified oxygen shock test resistant non-return valves and isolation valves

Gas Size Overall dimensions

[mm]CYL M002-RH Inert 2x1 920CYL M002-LH Fuel Gas 2x1 920CYL M002-O2 Oxygen 2x1 920CYL M002-CO2 Carbon Dioxide 2x1 920CYL M002-N2O Nitrous Oxide 2x1 920CYL M002-PR Propane 2x1 1200

CYL M004-RH Inert 2x2 1520CYL M004-LH Fuel Gas 2x2 1520CYL M004-O2 Oxygen 2x2 1520CYL M004-CO2 Carbon Dioxide 2x2 1520CYL M004-N2O Nitrous Oxide 2x2 1520CYL M004-PR Propane 2x2 2150



Notes

1 Package includes wall mounted manifold, high pressure flexible hoses (with anti-whip cables), 10 bar multistage pressure regulator, 11 2 bar safety relief valve, relief valve installation kit 2 Larger manifolds are available 3 Custom configurations and sizes can be manufactured to meet your requirements 4 Carbon Dioxide manifolds may require vaporisers to prevent freezing of the regulator 5 When ordering manifold systems please specify process gas, inlet & outlet pressure and gas supplier

Pipeline installation kit not included

10 Edition 1/2008 - © GCE UK 2008

Manual MCP Manifold Assembly Series 300


Manifold Assembly DETAILS

Wall mounted manifold assembly - Individual MCP non-return valves - Bank isolation valves - High pressure header pipe work - Angle section frame

Design Features


Gas SizeMCP M002-RH Inert 2x1MCP M002-LH Fuel Gas 2x1MCP M002-O2 Oxygen 2x1MCP M002-CO2 Carbon Dioxide 2x1

MCP M004-RH Inert 2x2MCP M004-LH Fuel Gas 2x2MCP M004-O2 Oxygen 2x2MCP M004-CO2 Carbon Dioxide 2x2

MCP M006-RH Inert 2x3MCP M006-LH Fuel Gas 2x3MCP M006-O2 Oxygen 2x3MCP M006-CO2 Carbon Dioxide 2x3

Notes

1 Package includes wall mounted manifold, high pressure flexible hoses (with anti-whip cables), 10 bar multistage pressure regulator, 11 2 bar safety relief valve, relief valve installation kit, 50mm pressure gauges, purge valves 2 Larger manifolds are available 3 Custom configurations and sizes can be manufactured to meet your requirements 4 Carbon Dioxide manifolds may require vaporisers to prevent freezing of the regulator 5 When ordering manifold systems please specify process gas, inlet & outlet pressure and gas supplier

11Edition 1/2008 - © GCE UK 2008

Autochange Manifold Assembly MAXIFLOW


Manifold Assembly details

Wall mounted manifold assembly - Cylinder securing restraints - Individual cylinder non-return valves - Bank isolation valves - High pressure header pipe work - Angle section frame

Design Features

Corrosion resistant wall mounted frame - Zinc-plated cylinder securing restraints - Dual seating non-return valves - Soft seat isolating valves - High strength high pressure header pipe work - Certified oxygen shock test resistant non-return valves and isolation valves -

Gas Size Overall dimensions [mm]CYL A002-RH Inert 2x1 920CYL A002-LH Fuel Gas 2x1 920CYL A002-O2 Oxygen 2x1 920CYL A002-CO2 Carbon Dioxide 2x1 920CYL A002-N2O Nitrous Oxide 2x1 920CYL A002-PR Propane 2x1 1200

CYL A004-RH Inert 2x2 1520CYL A004-LH Fuel Gas 2x2 1520CYL A004-O2 Oxygen 2x2 1520CYL A004-CO2 Carbon Dioxide 2x2 1520CYL A004-N2O Nitrous Oxide 2x2 1520CYL A004-PR Propane 2x2 2150



Notes 1 Package includes wall mounted manifold, Maxiflow autochange unit, high pressure flexible hoses (with anti-whip cables), 10 Bar pressure regulator, contact alarm gauges, high pressure purge valves, 11 2 Bar safety relief valve, relief valve installation kit 2 Larger manifolds are available 3 Custom configurations and sizes can be manufactured to meet your requirements 4 Cylinder connecting arms, regulator, safety valve etc are required to be ordered separately 5 When ordering manifold systems please specify process gas, inlet & outlet pressure and gas supplier

12 Edition 1/2008 - © GCE UK 2008

Autochange MCP Manifold Assembly MAXIFLOW



Wall mounted manifold assembly - Individual MCP non-return valves - Bank isolation valves - High pressure header pipe work - Angle section frame

Design Features


Gas SizeMCP A002-RH Inert 2x1MCP A002-LH Fuel Gas 2x1MCP A002-O2 Oxygen 2x1MCP A002-CO2 Carbon Dioxide 2x1

MCP A004-RH Inert 2x2MCP A004-LH Fuel Gas 2x2MCP A004-O2 Oxygen 2x2MCP A004-CO2 Carbon Dioxide 2x2

MCP A006-RH Inert 2x3MCP A006-LH Fuel Gas 2x3MCP A006-O2 Oxygen 2x3MCP A006-CO2 Carbon Dioxide 2x3

Notes 1 Package includes wall mounted manifold, Maxiflow autochange unit, contact alarm gauges, high pressure flexible hoses (with anti-whip cables), 10 bar multistage pressure regulator, 11 2 bar safety relief valve, relief valve installation kit, 50mm pressure gauges, purge valves 2 Larger manifolds are available 3 Custom configurations and sizes can be manufactured to meet your requirements 4 Carbon Dioxide manifolds may require vaporisers to prevent freezing of the regulator 5 When ordering manifold systems please specify process gas, inlet & outlet pressure and gas supplier

13Edition 1/2008 - © GCE UK 2008

Autochange Units

Type Gas Outl. press. Inlet Outlet VersionMM3942A Manifold Acetylene 1,5 bar SI21,7LH M G1/2 F french 768070 M with Cont gauge Acetylene 1,5 bar SI21,7LH M G1/2 F french MM3925O Manifold Oxygen 10 bar SI21,7 M G1/2 F french 768071 M with Cont gauge Oxygen 10 bar SI21,7 M G1/2 F french MM3925N Manifold Compr Gases 10 bar SI21,7 M G1/2 F french 768069 M with Cont gauge inert 10 bar SI21,7 M G1/2 F french

Conversion kits Gas Outl. press. Inlet OutletMM3964CO2 CO2 10 bar W21,8 M G3/8 M MM3964HE Helium 10 bar W21,8 M G3/8 M MM3964H Hydrogen 10 bar W21,8 M G3/8 M MM3964N inert 10 bar W21,8 M G3/8 M MM3964LHH LH-mix 10 bar W21,8 M G3/8 M MM3964O Oxygen 10 bar W21,8 M G3/8 M MM3964RHM RH-mix 10 bar W21,8 M G3/8 M

“Conversion kits supplied to replace older style (Series 300) autochange units which are now obsolete Supplied conversion kits are retro-fitted to existing manifold framework and are supplied complete with the necessary connecting arms”

0768070

MM3964CO2

14 Edition 1/2008 - © GCE UK 2008

Single Cylinder Manifold Assembly Series 300



Wall mounted manifold assembly - Cylinder securing restraint - Individual cylinder non-return valve - Isolation valve - Angle section frame

Design Features

Corrosion resistant wall mounted frame - Zinc-plated cylinder securing restraint - Dual seating non-return valves - Soft seat isolating valves - High strength high pressure header pipe work - Certified oxygen shock test resistant non-return valves and isolation valves

Gas SizeCYL S001-RH Inert Single CylinderCYL S001-LH Fuel Gas Single CylinderCYL S001-O2 Oxygen Single CylinderCYL S001-CO2 Carbon Dioxide Single CylinderCYL S001-N2O Nitrous Oxide Single CylinderCYL S001-PR Propane Single Cylinder

MCP S001-RH Inert Single CylinderMCP S001-LH Fuel Gas Single CylinderMCP S001-O2 Oxygen Single CylinderMCP S001-CO2 Carbon Dioxide Single Cylinder

Notes

1 Package includes wall mounted manifold, high pressure flexible hose (with anti-whip cable), 10 Bar pressure regulator, 11 2 Bar safety relief valve, relief valve installation kit, line isolation valve 2 Larger manifolds are available 3 Custom configurations and sizes can be manufactured to meet your requirements 4 Cylinder connecting arms, regulator, safety valve etc are required to be ordered separately 5 When ordering manifold systems please specify process gas, inlet & outlet pressure and gas supplier

15Edition 1/2008 - © GCE UK 2008

Cutting and Welding - High pressure gases

Semiautomatic manifold MIC60, HP 250/400

The MIC 60 Semiauto unit reduces compressed gases of 200 bar to a continuous gas supply of 14 bar The unit can be used for Oxygen and compressed gases It is designed for the use with 2 gas sources (cylinders or cylinder bundles) However, one side at time is the operating one and the other is then the reserve side The MIC 60 Semiauto will ensure continuity of gas flow by automatically changing from a nearly empty bank of cylinders to a full cylinder bank MIC 60 is a complete valve unit with high pressure filters, isolating valves, regulators, autochange unit and secondary pipe with line shut-off valve

Type Gas850 003 000 MIC 60 Semiauto Oxygen850 003 700 MIC 60 Semiauto Argon850 003 300 MIC 60 Semiauto Hydrogen850 006 700 MIC 60 Semiauto Nitrogen


Technical DataMax inlet pressure: 200 barMax outlet pressure: 14 bar, Nitrogen HP version 50 bar!Capacity: 250 m³/hInlet: W21,8 x 1/14“Outlet: stainles steel, diameter 21,2 x 3,1 mmWeight: 24 kg

Flow curve

The graph shows the working pressure as a function of the flow of gas for different inlet pressures For corresponding flexible hoses please see on page 6 Pressure units can be configurated in acc to the necessary number of cylinders or bundles

20

25

5

15

10

00 90 1008070602010

Unicontrol UC500 HD

504030


Durchfluß [m3/h]

p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1


40

50

10

30

20

00 800700600200100


500400300


p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

MR60 0732307

60

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

Durchfluß [m3/h]

Durchfluß [m3/h]

Durchfluß [m3/h]

HP gasesRated flow: 250 m³/h Max. flow: 250 m³/h Cylinder pressure: 200 barOutlet pressure: 14/50 bar

Pressure p2 [bar]

Performance charts

Flow Oxygen QN [Nm³/h]

Pressure p2 [bar]

Flow Nitrogen QN [Nm³/h]

16 Edition 1/2008 - © GCE UK 2008

Cutting and Welding - Diverse manifolds

MAXIFLOW Autochange COMPAC FLOW

The MAXIFLOW Autochange COMPAC FLOW eliminates un-programmed interruption of process gas without any electrical supply required for change over MAXIFLOW it is more compact than Semiauto MIC 60 and the expansion of gases will happen in two stages The MAXIFLOW includes isolation valves and purge valves Optional the MAXIFLOW is provided with contact alarm gauges and also pressure safety valves could be adapted

Gas Outlet pressureMM 39250 Maxiflow Oxygen 15 barMM 3925N Maxiflow inert 15 BarMM 4115RHM Maxiflow Mison, RH mix 15 bar0 768 065 Maxiflow Oxygen 25 bar0 768 066 Maxiflow Nitrogen 50 bar

For corresponding hoses please please see chapter “Accessory” Pressure units can be configurated in acc to the necessary number of cylinders or bundles

Technical Data Inlet / outlet pressure: 300 bar / 15 - 25 - 50 bar Inlet / outlet: 2 x W21,8x1/14“ / threaded union G3/8“m EN560Weight: app 5 kg

HP gasesRated flow: 50 m³/h Max. flow: 60 m³/h Cylinder pressure: 300 barOutlet pressure: 15 bar

Extension assembly example, for connecting pipes please look to chapter “Accessory”

Manifold TWIN

Compact cylinder manifold for compressed gases up to 200 bar (300 bar) inlet pressure On each side isolation valves and shut-off valves The design allows to install cylinder sub assemblies with common GCE components

0 768 067 Twin small flow 30 m³/h0 768 068 Twin medium flow 60 m³/h


Technical Data Inlet pressure: 200 bar (300 bar)Outlet pressure: 16 barMax Capacity: 70 m³/hInlet connection : W21,8x1/14“Outlet : Ball valve G½“Weight: 5 kg


20

25

5

15

10

00 90 1008070602010

Unicontrol UC500 HD

504030


Durchfluß [m3/h]

p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1


40

50

10

30

20

00 800700600200100


500400300


p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

MR60 0732307

60

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

Durchfluß [m3/h]

Durchfluß [m3/h]

Durchfluß [m3/h]

Performance chart

Pressure p2 [bar]

Flow QN [Nm³/h]

Pressure p2 [bar]

Flow QN [Nm³/h]

17Edition 1/2008 - © GCE UK 2008

Design Features

Typically wall mounted system•Cylinder securing restraints•Regulator mounting block•Compact in size•Ease of installation•Simple, low cost design •

Point block/valve, manifold regulator, connecting arm, cylinder rack, safety valve, etc require to be ordered separately Point block/valves are wall mounted

Point Block

All flexibles and connecting arms listed below fit to the inlet of the point blocks All outlet connections are British to BS 341(except NEVOC) The point blocks come complete with wall mounting bracket Connecting arm, manifold regulator, safety valve, etc require to be ordered separately Flammable (LH ) cannot be used for Acetylene

Gas MM1481 inert (RH )MM1480 flammable (LH ) MM1482 Carbon Dioxide MM1483 Nitrous Oxide MM3366 N2 NEVOC

Point Valve

All flexibles and connecting arms listed below fit to the inlet of the point valves All outlet connections are British to BS 341 (except NEVOC) The point blocks come complete with wall mounting bracket Connecting arm, manifold regulator, safety valve, etc require to be ordered separately Flammable (LH ) cannot be used for Acetylene (see data sheet)


Flexible Hoses

Connecting arms cylinder connections are British to BS 341 (except NEVOC) Both the point block and point valve can be used with flexibles Point blocks and point valves can be used to connect Multi-cylinder packs/bundles by using 2000 mm long flexible hoses Please see page 42


Cylinder Racks

Wall mounted racks come complete with cylinder secure restraints The rack is made from corrosion resistant angle Standard racks are designed for 230 mm diameter cylinders, other sizes available Floor mounting kit MM1635 is available

Type MM2581 1 cylinderMM2582 2 cylindersMM2583 3 cylindersMM2584 4 cylindersMM2585 5 cylindersMM2586 6 cylindersMM2587 7 cylindersMM2588 8 cylinders

Single Cylinder Couplers

Single Cylinder ManifoldsPOINT BLOCK

Inert(RH.) Flammable(LH.) Carbon Dioxide Nitrous Oxide N2 NEVOCMM1481 MM1480 MM1482 MM1483 MM3366

Notes;- 1. All flexibles and connecting arms listed below fit to the inlet of the point blocks.2. All outlet connections are British to BS.341(except NEVOC).3. The point blocks come complete with wall mounting bracket.4. Connecting arm, manifold regulator, safety valve, etc. require to be order separately.5. Flammable(LH.) cannot be used for acetylene (see datasheet).

POINT VALVEInert(RH.) Flammable(LH.) Carbon Dioxide Nitrous Oxide N2 NEVOCMM1489 MM1488 MM1490 MM1491 MM3367

Notes;- 1. All flexibles and connecting arms listed below fit to the inlet of the point valves.2. All outlet connections are British to BS.341(except NEVOC).3. The point blocks come complete with wall mounting bracket.4. Connecting arm, manifold regulator, safety valve, etc. require to be ordered separately.5. Flammable(LH.) cannot be used for acetylene (see datasheet).

CONNECTING ARMInert(RH.) Flammable(LH.) Carbon Dioxide Nitrous Oxide N2 NEVOCMM1476 MM1477 MM1478 MM1479 MM3361

Notes;- 1. Connecting arms cylinder connections are British to BS.341(except NEVOC).2. Both the point block and point valve can be used with flexibles(see datasheet).3. Point blocks and point valves can be used to connect Multi-cylinder packs/bundles by using 2000mm long flexible

hoses(sheet datasheet).

CYLINDER RACKS1Cylinder 2Cylinder 3Cylinder 4Cylinder 5Cylinder 6Cylinder 7Cylinder 8CylinderMM2581 MM2582 MM2583 MM2584 MM2585 MM2586 MM2587 MM2588

Notes;- 1. Wall mounted racks come complete with cylinder secure restraints.2. The rack is made from corrosion resistant angle.3. Standard racks are designed for 230mm diameter cylinders, other sizes available4. Floor mounting kit MM1635 is available.

CYLINDER SINGLE SYSTEM DETAILS• Typically wall mounted system.• Cylinder securing restraints.• Regulator mounting block.

Notes;- 1. Point block/valve, manifold regulator, connectingarm, cylinder rack, safety valve, etc. require to beordered separately.

2. Point block/valves are wall mounted.

DESIGN FEATURES• Compact in size.• Ease of installation.• Simple, low cost design.

GCE (Gas Control Systems) LtdMember of the GCE GroupVisit us at www.gceuk.com

2 Peel Road, West PimboSkelmersdale, Lancs, WN8 9QAUnited Kingdom

Telephone: +44 (0) 1695 714474Telefax: +44 (0) 1695 714456E-mail: [email protected]

18 Edition 1/2008 - © GCE UK 2008

Main benefits: simple installation and lower cost, individual work station control, non-return valves fitted to prevent back flow and pipeline contamination, quick visual indication of status with quarter turn isolation valves, complies with all current EN and British Standards, meets BCGA Codes of Practice

Linemaster Outlet Points

Maximum inlet pressure 30 bar except outlets fitted with flashback arresters, which are inert 10 bar, flammable 5 bar and Acetylene 1 5 bar Inlet connections: inert & flammable 15 mm solder socket, Acetylene G½ female Outlet points are fitted with a non-return valve, isolation valve, regulator block, wall mounting bracket The Acetylene outlet always has a flashback arrestor but outlets for Oxygen and flammable gases it is optional

Gas TypeMM0268 Acetylene with flashback arrestor FR 34MM0269 InertMM1748 Oxygen

Linemaster Regulators

Maximum inlet pressure 30 bar Inlet ¼ NPT male, outlet G3/8 RH or LH male cone For a new installation both a Linemaster regulator and Linemaster Outlet Point are required

Gas Outlet pressure0781708 Acetylene 1,5 bar0781707 Flammable (LH ) 2 bar0781704 Flammable (LH ) 4 bar0781697 Flammable (LH ) 12,5 bar0781706 Inert 2 bar0781703 Inert 4 bar0781699 Inert 12,5 bar

Series 300 Outlet Point Assemblies

Maximum inlet pressure 25 bar Inlet connections inert & flammable 15 mm solder socket, Acetylene G½ female Outlet is G3/8 RH or LH male cone to suit standard welding hose, this can be removed leaving ¼ NPT female for use with compression fittings or similar All outlets points are fitted with a non-return valve, isolation valve, regulator, outlet pressure gauge, dirt inlet filter, wall mounting bracket The Acetylene outlet always has a flashback arrestor If a flashback arrestor is required for Oxygen and flammable gases, it can be fitted to the outlet of the assembly Flammable gases: Hydrogen + mixtures, Methane + mixtures, Propane Please state gas and service pressure when ordering

Gas Outlet pressureMM2010-22 Acetylene 1,5 bar0781776 Inert (RH ) 2 bar0781777 Inert (RH ) 5 bar0781778 Inert (RH ) 10 bar0781779 Flammable (LH ) 2 bar0781781 Flammable (LH ) 10 bar

Outlet Points

Cutting and Welding - Point-of-Use Units

19Edition 1/2008 - © GCE UK 2008

Manifold Regulators - Single stage

Service pressure 300 bar maximum (except acetylene, propane and 14bar regulator) Sintered inlet filter Easy grip pressure adjusting knob or T -bar Mainly high strength brass body and fittings Safety patent bulkhead pressure gauges Stainless steel or reinforced elastomer diaphragm Safety valve on pressure reduction chamber Inlet connections are to BS 341 (except NEVOC) Fully tested assembly Notes: Regulators have been oxygen shock tested or in the case of acetylene, decomposition tested When ordering please state gas service

Gas Outlet pressure 151840 Inert (RH ) 14 bar (high flow) 0762864 Inert (RH ) 28 bar 0762865 Inert (RH ) 100 bar 0762866 Inert (RH ) 200 bar151841 Flammable (LH ) 14 bar (high flow)0782970 Acetylene 1 5 bar MM1730 Propane 2 bar 0762561 N2 NEVOC 28 bar 0762562 N2 NEVOC 100 bar 0762558 N2 NEVOC 200 bar

Inert gases: Air, Nitrogen, Helium, Argon, Ar/CO2 mixtures Flammable gases: Hydrogen, Methane, Hydrogen mixtures, Methane mixtures

Manifold Regulators - Multi stage

Service pressure 300 bar maximum Two stage pressure reduction giving extremely good pressure characteristics Stainless steel first stage pressure reduction Large second stage pressure reduction chamber giving precise pressure control Integral bursting disc & safety valve on second stage pressure reduction Sinter inlet filter Safety patent bulkhead inlet & outlet pressure gauges Mainly high strength brass body and fittings Captivated easy grip pressure adjusting knob Integral first stage safety valve can be piped away Inlet connections are to BS 341(except NEVOC) Fully tested assembly

Notes: Regulators have been oxygen shock tested or in the case of acetylene, decomposition tested When ordering please state gas service

0762146 Inert (RH ) 4 bar 0762147 Inert (RH ) 10 bar 0762396 Inert (RH ) 42 bar0762148 Flammable (LH ) 4 bar 0762149 Flammable (LH ) 10 bar 0762397 Flammable (LH ) 42 bar0762153 Carbon Dioxide 10 bar 0762398 Carbon Dioxide 42 bar0762152 Nitrous Oxide 10 bar0762084 N2 NEVOC 10 bar

Inert gases: Air, Nitrogen, Helium, Argon, Ar/CO2 mixtures Flammable gases: Hydrogen, Methane, Hydrogen mixtures, Methane mixtures

Manifold Regulators

20 Edition 1/2008 - © GCE UK 2008

Safety valves

Set pressure is normally between 10 & 25% above the required line pressure, but ensuring that the design pressure is not exceeded and that the valve will reset above the line pressure Safety relief valve connections are: Inlet, 1/2BSP male flat seat Outlet 3/4BSP female Safety relief valve adaptor is available and is designed to be silver soldered to 15 mm od copper pipe The safety relief valve is normally fitted to the branch of a copper tee

Design Features

High flow capacity•Wide range of set pressures•Vent can be piped away•Certificates of performance and conformance available•Can be installed in any orientation•Ease of maintenance when using GCE adaptor or installation kit •

Set Pressure (Relief Pressure)

Bar.g Psi.gMM1565 2 1 30 MM1566 2 8 40 MM1776 3 8 55 MM1777 4 1 60 MM1567 4 8 70 MM1568 6 2 90 MM1779 6 9 100 MM1569 7 6 110 MM1780 8 9 129MM1782 10 3 150 MM1965 11 2 162 MM1783 11 7 170 MM1781 16 9 245 MM1784 17 6 255 MM1785 22 1 320 MM3400 31 450 MM3401 46 667 Options MM1449 Safety valve adaptor MM2570 Pipeline installation kit RH * MM2395 Pipeline installation kit LH *

* The Pipeline Installation kit is an assembly of the following: safety valve block, inter-connecting pipe from the regulator or auto, G1/2 isolating ball valve and assembled to the manifold frame

Accessory HP 250/400

21Edition 1/2008 - © GCE UK 2008

Flexible Hoses

Can be used with most cylinder orientation Fitted with full length restraining/anti-whip wire Inlet filters fitted to all cylinder connection flexibles Gas quality linings End fittings high strength brass Cleaned to Oxygen Cleanliness Standards Acetylene flexible fitted with non-return valve

LengthHigh pressure flexible (G3/8 loose nut & nipple - 1/4NPT.female) MM2526 600 mm MM2527 1000 mmMM2528 1500 mm MM2529 2000 mm MM2530 3000 mm MM2546 5000 mm

High pressure flexible (G5/8RH.bullnose - G3/8 loose nut & nipple) MM2531 600 mm MM2532 1000 mmMM2533 1500 mm MM2534 2000 mm MM2535 3000 mm MM2590 5000 mm

High pressure flexible (G5/8LH.bullnose - G3/8 loose nut & nipple) MM2536 600 mm MM2537 1000 mmMM2538 1500 mm MM2539 2000 mm MM2540 3000 mm MM2591 5000 mm

High pressure flexible (G3/8 loose nut & nipple both ends) MM2541 600 mm MM2542 1000 mmMM2543 1500 mm MM2544 2000 mm MM2545 3000 mm MM2592 5000 mm

High pressure Oxygen flexible (G5/8RH.bullnose - G3/8 loose nut & nipple) MM2598 1000 mmMM2599 2000 mm High pressure flexible (NEVOC inert - G3/8 loose nut & nipple) MM3361 600 mm MM3362 2000 mm

High pressure flexible (Carbon Dioxide - G3/8 loose nut & nipple) MM3363 600 mm MM3364 1000 mmMM3365 2000 mm

High pressure flexible Acetylene (G5/8 LH - G3/8 loose nut & nipple) MM3513 600 mm MM3436 1000 mmMM3514 2000 mm

Series 300 Flexible Connecting Arms600mm 1000mm 1500mm 2000mm 3000mm 5000mm

High pressure flexible (G3/8 loose nut & nipple - 1/4NPT.female)MM2526 MM2527 MM2528 MM2529 MM2530 MM2546

High pressure flexible (G5/8RH.bullnose - G3/8 loose nut & nipple)MM2531 MM2532 MM2533 MM2534 MM2535 MM2590

High pressure flexible (G5/8LH.bullnose - G3/8 loose nut & nipple)MM2536 MM2537 MM2538 MM2539 MM2540 MM2591

High pressure flexible (G3/8 loose nut & nipple both ends)MM2541 MM2542 MM2543 MM2544 MM2545 MM2592

High pressure Oxygen flexible (G5/8RH.bullnose - G3/8 loose nut & nipple)- MM2598 - MM2599 - -

High pressure flexible (NEVOC inert - G3/8 loose nut & nipple)MM3361 - - MM3362 - -

High pressure flexible (Carbon Dioxide - G3/8 loose nut & nipple)MM3363 MM3364 - MM3365 - -

High pressure flexible Acetylene (G5/8 LH - G3/8 loose nut & nipple)MM3513 MM3436 - MM3514 - -

DESIGN FEATURES• Can be used with most cylinder orientations. • Fitted with full length restraining/anti-whip wire.• Inlet filters fitted to all cylinder connection flexibles. • Gas quality linings.• End fittings high strength brass. • Cleaned to Oxygen Cleanliness Standards.• Acetylene flexible fitted with non-return valve




G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8














G3/8 1/4NPT-F

G5/8 G3/8

G5/8LH G3/8

G3/8 G3/8

G3/8 G3/8

G5/8 G3/8

W30x2 G3/8

0.860x14TPI G3/8

G5/8LH G3/8

22 Edition 1/2008 - © GCE UK 2008

Gas panels Propane

Gas supply panels for Propane cylinders of up to 33 kg, inlet pressure 1 - 16 bar, outlet pressure 50 mbar All parts are DIN-DVGW proofed The single gas panel consists of a low pressure regulator, 400 mm intermediate pressure hose with safety shut-off valve and safety relief valve The double gas panel consists of low pressure regulator, safety shut-off valve (connected upstream) and safety relief valve, 2 high pressure hoses with cylinder connection, mounting clamp, automatic sequence valve PN 16, gas leakage alarm via contact gauges optional Gas supply with the double gas panel is achieved exclusively alternating the supply connections Both panels follow requirements of german TRF 1996 and resp BGV D 34§11 App 4

Type Leakage alarm SMD090 Single gas panel SMD 090 KI Single gas panel contact gaugesBMD092 Double gas panel BMD092 KI Double gas panel contact gauges

Technical DataInlet pressure: 16 bar Outlet pressure: 0,05 bar Flow: 4 kg/hInlet: single cylinder panel: cylinder connection double cylinder panel: hoseOutlet: single cylinder panel: intermediate pressure hose double cylinder panel: tube end 12 mm

Configuration example: double cylinder manifold with contact gauges

Gas panel single cyl connection

Gas panel with double cyl connection ready assembled

Propane hose

Configuration example: single cylinder manifold with contact gauges

Inlet

Outlet

Cutting and Welding - Diverse manifolds

Diverse manifolds

23Edition 1/2008 - © GCE UK 2008

High pressure manifold valve, DN3

2 port high pressure valve for cylinder manifolds Dimensions (wxh): 54 x 90 mm

Max. work. Net Gas press. DN Inlet Outlet Weight203 010 633 Acetylene 25 bar 3 mm W 21,8 x 1/14 LH EXT W 21,8 x 1/14 RH EXT 0,5 kg9 560 641 Oxygen 300 bar 3 mm W21,8x1/14“ W21,8x1/14“ l h 0,5 kg

High pressure manifold and bundle shut-off valve, DN8 ACE

2 port high pressure steel diaphragm valve for Acetylene cylinder manifolds, cylinder pallet bundles and filling stations Dimensions (wxh): 84 x 105 mm

Max. work. Net press. DN Inlet Outlet weight 215 190 122 25 bar 8 mm R 3/4 RH INT R 3/4 RH INT 1,9 kg

High pressure manifold valve on bracket, DN8 ACE

2 port high pressure valve for Acetylene cylinder manifolds This valve consists of valve and filter Components are mounted on a wall bracket Dimensions (wxh): 139 x 250

Max. work. Net press. DN Inlet Outlet weight215 190 210 25 bar 8 mm R 3/4 RH INT W 21,8 x 1/14 LH EXT 3,0 kg

High pressure manifold and bundle shut-off valve, HP, DN8

2 port high pressure valve for Oxygen, Air, Argon, Carbon Dioxide, Nitrogen, Hydrogen and fuel gas cylinder manifolds, cylinder pallet bundles and filling stations. Working pressure 300 bar as option. Dimensions (wxh): 70 x 110 mm. Max. work. Net press. DN Inlet Outlet weight Gas203 010 533 250 bar 8 mm W 21,8 x 1/14 RH EXT W 21,8 x 1/14 RH EXT 0,9 kg 203 010 660 250 bar 8 mm W 21,8 x 1/14 LH EXT W 21,8 x 1/14 LH EXT 0,9 kg Fuel gas9 561 250 300 bar 8 mm W 21,8x1/14“ r h W 21,8x1/14“r h , 0,9 kg neutral gas

High pressure manifold valve, on bracket, HP, DN8

2 port high pressure valve for Oxygen, Air, Argon, Carbon Dioxide, Nitrogen and Hydrogen pack manifolds The valve consists of valve and filter with non return valve Components are mounted on a wall bracket Working pressure 300 bar as option Dimensions (wxh): 150 x 252 mm

Max. work. Net press. DN Inlet Outlet weight Gas215 190 217 250 bar 8 mm W 21,8 x 1/14 RH EXT W 21,8 x 1/14 LH INT 2,0 kg215 191 087 250 bar 8 mm W 21,8 x 1/14 LH EXT W 21,8 x 1/14 LH EXT 2,0 kg Fuel gas

3-Port High pressure manifold and bundle shut-off valve, HP, DN7

3 port high pressure valve for Oxygen, Air, Helium, Argon, Carbon Dioxide, Nitrogen and Hydrogen cylinder manifolds, cylinder pallet bundles and filling stations Outlet acc to DIN 477 Working pressure 300 bar as option Dimensions (wxh): 80 x 118 mm

Max. work. Net press. DN Inlet Outlet weight Gas 202 502 285 250 bar 7 mm W 21,8 x 1/14 RH EXT W 21,8 x 1/14 RH EXT 1,2 kg Oxygen202 502 289 250 bar 7 mm W 21,8 x 1/14 RH EXT W 21,8 x 1/14 LH EXT 1,2 kg Hydrogen202 502 292 250 bar 7 mm W 21,8 x 1/14 RH EXT W 24,32 x 1/14 RH EXT 1,2 kg Nitrogen203 010 661 250 bar 7 mm W 21,8 x 1/14 LH EXT W 21,8 x 1/14 LH EXT 1,2 kg Fuel gas Pigtails for various gases in brass and stainless steel and T pieces for Oxygen, Hydrogen, Argon, Carbon Dioxide, Nitrogen and Helium for working pressure 300 bar are available on request

InletInlet

Outlet

High pressure bundle, shut-off and ball valves


24 Edition 1/2008 - © GCE UK 2008


Ball Valves

To achieve the demands of safety and maintenance shut-off valves should be fitted in every main line, riser and branch line in the pipe work system These valves are easy to operate, need no maintenance, include unions for brazing and flat sealing connections, are reliable and easy to fit Materials are for housing - nickel plated brass, ball - chrome plated brass, stem - nickel plated brass Maximal working pressure: 33 bar Tighten proof: 50 bar

In-/Outlet DN Gas215 191 138 ½” DN10 O2215 191 140 3/4 “ DN15 O2215 191 142 1 ¼” DN25 O2

In-/Outlet Pressure Gas14 016 643 G3/8” 64 bar O2

Connector male/male

In-/Outlet548900 005945 G3/8”

Shut-off-valves

In-/Outlet Size Gas L x H [mm]325 196 767 G½“ DN10 O2 67 x 46325 196 768 G3/4“ DN15 O2 77 x 48325 196 770 G1 ¼“ DN25 O2 115 x 54325 397 236 G1 ½“ DN32 O2 132 x 72325 397 237 G 2“ DN40 O2 145 x 84

Set of unions

Material red brass SS5204.

Pipe diam.

Size inside/outside [mm]325 196 910 DN 10 10/15 325 196 911 DN 10 12 325 196 912 DN 15 15/22 325 196 913 DN 15 35 325 196 914 DN 25 22/35 325 196 915 DN 25 28 325 197 324 DN 32 35 325 197 325 DN 40 42 325 196 776 DN 50, 2 P 54 (order both DN 40 and 50 for union enlargement)

Butterfly hand wheel for valve

Size325 111 534 DN15325 111 206 DN25

Non return valves

Size325 397 676 DN15325 397 677 DN25325 397 678 DN40

25Edition 1/2008 - © GCE UK 2008

Cutting and Welding - Maniflow

Standard for HP gases: Sinter metal filter and non return valve included •By using non return valves a non wanted back flow into other connected •cylinders has been excluded For this reason a continuous gas flow of all the cylinders is guaranteed

Very easy to extend The modular design constitutes numerous variants •For bundle and cylinder gas supply •

Advantages

Compact block design for cylinder pressure •up to 300 bar

GCE high pressure shut-off valves•Burn-out proof•Space saving installations•In- and outlet connections W 21,8 x 1/14“ according •to DIN 477 or other european standards

The manifold block MANIFLOW with its modular design establishes a complete range of gas control units either for cylinders or for bundle gas supply with Acetylene or high pressure gases up to 300 bars Different gas flow level may be selected

This pressure control device is delivered as a basic unit without connection hoses Hoses have to be ordered related to gas type and kind of supply

(bundles or cylinders) Once chosen this kind of modular concept you are always provided with the opportunity to extend your gas supply to your particular operating conditions

14 037 797 / 14 037 423

14 037 312 / 14 037 514

Manyflow-Block

For use up to 3 cylinders , or 2-3 bundles Inlet/outlet: W 21,8 x 1/14“ Inclusive gaskets

14 037 312 Manyflow-Block for Acetylene with wall bracket14 037 797 ACE tube for cylinder sub assemblies, L = 750 mm, 14 037 423 ACE tube for bundle extension, L = 1500 mm

Using a high pressure connecting tube (14 037 797) Manyflow-Blocks may be connected to a cylinder bank for common gas-discharge, if necessary For compressed gases up to 300 bar with wall bracket, incl gaskets Inlet/Outlet: W 21,8 x 1/14“ Connection of 3 single cylinders or 2 (3) gas packages The use of one high pressure connecting tube (14 037 797) enables connecting more Manyflow-Blocks together, to discharge higher amounts of cylinders during same time

Manyflow blocks are provided generally with 3 plugs (14 037 302), to protect threaded union and to close inlet ports not in use

The MANIFLOW block HP is shock tested at 360 bar The use with 300 bar Oxygen is limited to max 3 gas cylinders or 3 gas packages (bundles) For neutral gases no limitation for extension to more than one Manyflow block sub assembly exists

14 037 514 Manyflow-Block HP with wall bracket14 037 797 HP tube length 750 mm, for cylinder sub assemblies14 037 423 HP tube length 1500 mm, for bundle sub assemblies

Manyflow-Block for ACE and HP

The Manyflow design

26 Edition 1/2008 - © GCE UK 2008

Point-of-use units StandardPOU-regulators and components On request all units can be configurated in accordance to the requested gases

Max inlet pressure p1 = 30 bar

Point-of-use unit

With regulator, ball valve, wall bracket, brazing- and welding nipple 3/8“, swivel nut G 3/8“ Internal pipe diameters 7 mm, external diameter 12 mm

14 096 150 Acetylene14 096 151 Oxygen14 096 152 Argon/CO2 (Liter gauge)14 096 165 Propane14 096 166 Nitrogen14 096 167 Compressed air14 096 168 Argon/CO2 (bar)14 096 169 Hydrogen14 096 170 Argon/Hydrogen14 096 171 Forming gas (Liter gauge)14 096 172 Forming gas (bar)Wall bracket and ball valve will be assembled on place of construction.

Point-of-use unit- flowmeter

With flowmeter, regulator, ball valve, wall bracket, brazing- and welding nipple 3/8“, swivel nut G 3/8“ Internal pipe diameters 7 mm, external diameter 12 mm

Gas Type14 096 163 Argon/CO2 30 l/min14 096 164 Argon/CO2 16 l/min

14 096 173 Forming gas 50 l/min

Wall bracket and ball valve will be assembled on place of assembling.


Point-of-use unit, double type


14 096 153 Ox – Ac14 096 154 Ox – Prop14 096 155 Ox – Ar14 096 156 Ar – Ar

Wall bracket and ball valve will be assembled on place of construction Other combinations on request

Outer dimensions and sample for assembly of double type point of use station

27Edition 1/2008 - © GCE UK 2008

Accessory for point-of-use units Standard

Point-of-use regulators

Gas Performance 0 783 071 14 096 350 DIN GL-AR-10 Argon, Compr Air, Nitrogen 10 bar0 783 070 14 096 352 DIN GL-OX Oxygen 10 bar0 783 073 14 096 353 DIN GL-AC Acetylene 1,5 bar0 783 080 14 096 357 DIN GL-H Hydrogen 10 bar0 783 077 14 096 358 DIN GL-PRO Propane 2,5 bar 0 783 072 14 096 351 DIN GL-ARC Argon/CO2 32 l/min0 783 076 14 096 356 DIN GL-FORM Forming gas 50 l/min0 783 081 14 096 359 DIN GL-AR-H Argon/Hydrogen 32 l/min0 783 078 14 096 360 DIN GL-FORM Forming gas 50 l/min0 783 074 14 096 354 DIN GL-FLOW 30 Flowm 30 l/min0 783 075 14 096 355 DIN GL-FLOW 16 Flowm 16 l/min

Ball valves

Gas14 016 153 with elbow Oxygen 14 016 154 with elbow Fuel gas 14 016 155 with elbow other gases

Wall brackets

14 016 145 for 1 point-of-use regulator 14 016 146 for 2 point-of-use regulator 14 016 147 for 3 point-of-use regulator

Brazing and welding nipples , nuts

Connecting nipples, outer diameter 12 mm

Type Material Gas 14 018 004 Welding nipple 3/8“ steel Acetylene14 018 024 Brazing nipple 3/8“ brass all other gases 14 099 655 Swivel nut 3/8“ l h brass all fuel gases14 099 672 Swivel nut 3/8“ brass all other gases

14 018 004

14 018 024

14 099 655

14 099 672

Point-of-use unit, triple type


14 096 157 Ar – Ox – Ac14 096 158 Ox – Ox – Ac14 096 159 Ox – Ox – Prop14 096 160 Ox – Ox – Ar14 096 161 Ox – Ar – Ar14 096 162 Ar – Ar – Ar

Wall bracket and ball valve will be assembled on place of construction Other combinations on request


28 Edition 1/2008 - © GCE UK 2008

Outlet Points EASY WORK

These outlet points “EASY WORK”, consisting of regulator, pressure gauge and shut-off valve, are a innovation in the field of central gas supply in deed Excellent protection, given by the fully the regulator covering external metal cover, is combined with excellent look and easy assembly Their high precision gives the possibility to use them with any application in cutting and welding

The 14200 is a flowmeter gauge and 14250 a column flowmeter version Versions for Oxygen, Acetylene/Propane and Natural gas are equipped with the 3-function flashback arrestor MV93 placed at the outlet The Argon/CO2 version includes a flowmeter, adjustable with a regulating valve

Thanks to this particular design of components, they can be assembled in 15 minutes, using appropriate tools Maintenance operation thus makes it very simply to be executed by just removing the metal cover, which is fully independent from the internal parts

Inlet Low Working Max. Gas pressure pressure pressure flowCE14000 Oxygen 30 bar 0 - 15 bar 8 35 m³/h CE14100 Acet /GPL/Hydrogen 30 bar 0 - 2,5 bar 1,5 10 m³/h CE14105 Fuel gas (4 bar) 30 bar 0 - 6 bar 3,8 10 m³/h CE14200 Argon/CO2 flowmeter 30 bar 0 - 40 l/min – 32 l/min CE14250 Argon/CO2 flowmeter 30 bar fixed 3,5 bar – 30 l/minCE14300 Nitrogen and inert gases 30 bar 0 - 15 bar 8 35 m³/h Technical DataInlet: 3/8” m ( enclosed ½” f )Outlet: 3/8” (hose nozzles incl )Dimensions (wxhxd): 110 x 170 x 70 (90 with flow control) mmDistance inlet to outlet: 300 mmWeight: 2,8 kg

Oxygen and Acetyleneversions with safety

valve

Argon/CO2 version

Argon/CO2 versionwith flow control

Point-of-use regulator DEBISTAR

Flow adjustable regulator (9 steps) for precise welding gas flow (MIG or TIG) up to 30 l/min Utilization of this regulator needs a stable gas supply for the regulator itself and a gas flow shut-off device

Gas A101320 Argon/Helium


29Edition 1/2008 - © GCE UK 2008

Point-of-use set unit for heating Oxygen, cutting ox and fuel gas with regulators type S100, BG 20 and S200

The inlet pressure for type S100 type regulators Oxygen should be between 13 and 16 bar Inlet pressure for S200 is limited to 16 bar Max Flow 200 m³ Point-of-use with 1 regulator for fuel gas, 1 regulator for heating Oxygen, 1 regulator cutting Oxygen

14 016 182 Complete unit

Max flow Cutting-O2 at 15 bar p2 200 m³/h Heating-O2 at 15 bar p2 30 m³/h Oxy-fuel gas at 3 bar p2 15 m³/h

Possible number of machine cutting torches related to material thickness: 2 torches 300 mm or 4 torches 200 mm or 6 torches 100 mm

Point-of-use units High Flow

Point-of-use units type S100

Max Flow 100 m³

14 016 242 Hydrogen and HP gases14 016 243 Fuel gases

Point-of-use unit for heating Oxygen, cutting ox and fuel gas with regulators type S100 and BG 20

Max Flow 100 m³ Point-of-use with 1 regulator for fuel gas, 1 regulator for heating Oxygen, 1 regulator cutting Oxygen

14 016 180 Max flow

Cutting-O2: at 15 bar p2 100 m³/h Heating-O2: at 15 bar p2 20 m³/h Oxy-fuel gas: at 3 bar p2 10 m³/h

Possible number of machine cutting torches related to material thickness: 2 torches 300 mm or 4 torches 200 mm or 6 torches 100 mm

hose nozzle 3/4“, 12,5 mm

hose nozzle ½“, 11 mm

hose nozzle 12,5 mm + 16 mm

19 mm

Type S200

hose nozzle 12,5 mm + 16 mm

hose nozzle 11 mm + 16 mm

Type S100


30 Edition 1/2008 - © GCE UK 2008

Point-of-use units High Flow - Accessory

These Point-of-use systems (page 18 + 19) are designed for high performing applications, i e machine cutting and automized heating and similar applications, where standard point-of-use stations do not provide sufficient capacity and flow

Ball valve

For compressed gases Inlet: 3/4“ swivel nut with brazing nipple, diameter 19 mm Outlet: 3/4“ swivel el nut with hose socket, 12,5 and 16 mm

14 016 175 Ball valve DN 20

High performance multi functional safety device

Consists of high performance multi functional safety device GVO90/GVA 90 and ball valve DN 20, without regulator

Inlet Gas Type Gas Inlet Outlet pressure discharge14 016 176 GVO 90 Oxygen 3/4“ swivel nut with ½“ swivel nut with 15 bar 20 m³/h brazing nipple 19 mm hose socket 12,5 mm

14 016 178 GVA 90 Fuel gas ½“ swivel nut with ½“ swivel nut with 3 bar 10 m³/h brazing nipple 15 mm hose socket 11 mm

High performance twin multi functional safety device

Consists of 2 high performance multi functional safety devices GVO90/GVA 90 and ball valve DN 20, without regulator

Type Gas Inlet Outlet14 016 177 GVO 90 Oxygen G3/4“ swivel nut with G 3/4“ swivel nut with brazing nipple 19 mm hose socket 12,5 mm 14 016 179 GVA 90 Fuel gas G½“ swivel nut with G 3/4“l h swivel nut with brazing nipple 15 mm hose socket 16 mm

Flash back arresters

Safety device (flash back arrestor) for regulators

Type Gas In-/outlet P1 P2 Discharge14 008 400 GVO 10 Oxygen ¼“ 5 bar 3,5 bar 34 m³/h14 008 401 GVO 10 Oxygen 3/8“ 5 bar 3,5 bar 34 m³/h14 008 402 GVA 10 all fuel gases 3/8“ l h 1,5 bar 0,9 bar 10,5 m³/h14 008 118 GVY 10 mixed fuel gases M 14x1,5 l h ,3/8“ l h 1,5 bar 0,9 bar 10,5 m³/h548 980 000 400 FR63 M56x2 or tube Ø 33,7/25 mm 50 m³/h

High performance multi functional safety device for cylinder connection

Type Gas Inlet Outlet P1 P2 Discharge14 008 440 GVO 90 Hydrogen 3/8“ 3/8“ 1,5 bar 0,9 bar 10,5 m³/h14 008 121 GVO 10 all fuel gases 3/8“ l h 3/8“ l h 1,5 bar 0,9 bar 10,5 m³/h14 008 117 GVY 50 mixed fuel gases M 14x1,5 l h 3/8“ l h 1,5 bar 0,9 bar 10,5 m³/h14 008 130 GVA 90 all fuel gases ½“ l h ½“ l h 1,5 bar 0,9 bar 10,5 m³/h14 008 131 GVO 10 Oxygen ½“ 5 bar 3,5 bar 34 m³/h

At lower inlet pressures p1, pressure drop and gas discharge will be reduced Attention: Please obtain the regular inspection for safety devices Note the national laws


FR 63GV

31Edition 1/2008 - © GCE UK 2008

High Flow - Laser and Plasma Applications

20

30

20 40 60 80 100 120 140

FMD Uni 500 N2

40

10

0

p 50 bar1

p 31 bar1

Ausgangsdruck p2 (bar)

Durchfluß Qn [Nm3/h]10 20 30 40 50 60 80

FMD Uni 500 O2

2

21 bar

15 bar


Durchfluß Qn [Nm3/h]

10

12

8

4

00 70

40 bar

Performance chart N2 Performance chart O2


Cylinder pressure regulator FMD 100-14

Single stage, purity up to 5 0 Inlet pressure max 300 bar Outlet pressure up to 40 bar (N2) /13 bar (O2 + others)

Gas Cylinder pressure0 782 940 14 096 259 N2 200 bar0 782 943 14 096 261 N2 300 bar0 782 942 14 096 260 O2 200 bar0 782 944 14 096 258 O2 300 bar0 782 941 14 096 254 Ar 200 bar

Features This regulator includes inlet and outlet pressure gauge, manual cylinder connection and relief valve to prevent unacceptable pressure rising Security pressure gauge acc to EN 562

Application For high flow laser process gases If gas supply may be interrupted, single cylinder gas supply configuration is the simplest and cheapest way to accomplish Among others this configuration is used for start-up of laser gas machining

Technical dataBody: brass 2 0402 CuZn40Pb2Bonnet: brass 2 0402 CuZn40Pb2Housing sealing: NBR 70° IRHSeat sealing: PA 6 6 Zytel 103 DupontPiston sealing (for N2): Silicon rubber 80° IRHDiaphragm (for O2): EPDMWorking temperature: -40 ° C to 50 ° CDimensions (wxhxd): 190 x 110 x app 130 mmWeight: 1,4 kg Pressure gauge range: 0 - 400 bar, 0 - 315 bar, 0 - 65 barOutlet pressure: 0 - 40 bar (N2), 0 - 13 bar (O2) Inlet: manual cylinder connection DIN 477-5 for 300 bar or acc to DIN 477-1 for 200 barOutlet: G ½” EN 560 f

Pressure p2 [bar]

Flow QN [Nm³/h]

Pressure p2 [bar]

Flow QN [Nm³/h]

32 Edition 1/2008 - © GCE UK 2008

20

30

20 40 60 80 100 120 140

FMD Uni 500 N2

40

10

0

p 50 bar1

p 31 bar1


Durchfluß Qn [Nm3/h]10 20 30 40 50 60 80

FMD Uni 500 O2

2

21 bar

15 bar



10

12

8

4

00 70

40 bar

Performance chart O2

Gas panel BSMD 100-30

Single-stage, purity max 5 0 Inlet pressure 300 bar, outlet pressure 0 - 40 bar (N2) or 0 - 16 bar (O2)

Gas24 037 040 N224 037 058 O2 Features This gas panel with single-stage pressure regulator and inlet and outlet pressure gauge is mounted onto a stainless steel panel The shut-off is done by an outlet ball valve Pressure gauge in safety version acc to EN 562 Relief valve at the outlet protects user and applications against unacceptable pressure rise Optionally one or more pressure gas cylinders or bundle can be connected The BMD version allows a manual change over from the emptied side onto the reserve side Upon request this gas panel can be also equipped with a contact pressure gauge The check valves integrated into the input connections prevent a refilling of the reserve side into the emptied side

Application For high flow process laser gas supply This gas panel is used for the stationary expansion of process gases (operation gases) for the Nitrogen high pressure cutting (laser fusion cutting) as well as for optical laser flame cutting (Hydrogen version), and also for decompression of rare gases (Argon/Helium) from gas containers The expansion occurs according to gas requirement optionally from one or two gas cylinders and/or bundles

Technical data Body: brass 2 0402 CuZn40Pb2Bonnet: brass 2 0402 CuZn40Pb2Housing sealing: NBR 70° IRHSeat sealing ( for N2): PA 6 6 Zytel 103 DupontSeat sealing ( for O2): PA 6 6 Zytel 103 DupontPiston sealing (for N2): Silicon rubber 80° IRHDiaphragm (for O2): EPDM Ball valve sealing: PTFE, chamberedWeight: 1,4 kgWorking temperature: -40 °C to 50 °CDimensions ((wxhxd)): 400 x 155 x 150 mmPressure gauge range: 0 - 400 bar, 0 - 65 barInlet: Manual connection DIN 477-5 for 300 bar (CEN) or acc to DIN 477-1 (200 bar)Outlet: G ½“ f acc to EN 560

Performance chart N2

1 First gas stock2 Additional gas stock3 Cylinder connection4 Pressure regulator5 Inlet contact pressure gauge6 Outlet pressure gauge7 Relief valve9 Outlet ball shut-off valve 10 Process gas outlet11 Non return valve


Pressure p2 [bar]

Flow QN [Nm³/h]

Pressure p2 [bar]

Flow QN [Nm³/h]

33Edition 1/2008 - © GCE UK 2008

Gas panel BMD 100-39

Single-stage, purity max 5 0 Inlet pressure 300 bar, outlet pressure 0 - 40 bar (N2) or 0 - 16 bar (O2)

Gas24 037 246 N224 037 247 O2 + others

Features This gas panel with automatic change over is mounted onto a stainless steel panel and consists of two one-stage pressure regulators with inlet and outlet pressure gauge, a switch unit with two magnetic valves including control unit and signal monitoring Automatic change over for uninterrupted gas flow Solenoid valves guarantee a maximum of exhaustion of the gas containers Acoustic and optical gas leakage monitoring via contact pressure gauges and signal device In each case, after falling below boundary values (at the pressure gauges preset delay period) gas supply will be changed over to the full cylinder Check valves on both sides prevent the reflux of gas back into the empty side The user will be protected against operating errors by clear display and operator control functions

Application For high flow uninterrupted laser process gas supply This gas panel is used for Nitrogen, Hydrogen as well as rare gases (Argon/Helium) from cylinders or bundle batteries for the optical laser material processing

Technical data Pressure RegulatorBody: brass 2 0402 CuZn40Pb2Bonnet: brass 2 0402 CuZn40Pb2Housing sealing: NBR 70° IRHSeat sealing ( for N2): PA 6 6 Zytel 103 DupontSeat sealing ( for O2): PA 6 6 Zytel 103 DupontPiston sealing (for N2): silicon rubber 80° IRHDiaphragm (for O2): EPDM 70° IRH Ball valve sealing: PTFE, chamberedWorking temperature: -20 °C to 50 °CDimensions (WxHxD): 400 x 180 x 170 mmPressure gauge range: 0 - 400 bar, 0 - 65 barInlet: W21,8 x 1/14” Outlet: ball valve G ½“ f

Technical data Control UnitPower supply: 220 V, 50 HzMax gas pressure: 50 barWorking temperature: 0 to 55 °C Dimensions (wxhxd): 200 x 120 x 95 mmSignal lamps: yellow: the actual connected gas container red: gas supply run out green: power supply OKEntry keys: manual selection gas container A manual selection gas container B confirmation of trouble/alarm

Contact gauges on demand

1 Cylinder connection2 Filter3 Convoluted hoses4 Pressure regulator5 Inlet pressure gauge6 Outlet contact pressure gauge7 Solenoid valve9 Outlet ball shut-off valve10 Relief valve11 Process gas outlet

20

30

20 40 60 80 100 120 140

FMD Uni 500 N2

40

10

0

p 50 bar1

p 31 bar1


Durchfluß Qn [Nm3/h]10 20 30 40 50 60 80

FMD Uni 500 O2

2

21 bar

15 bar



10

12

8

4

00 70

40 bar

Performance chart N2 Performance chart O2


Pressure p2 [bar]

Flow QN [Nm³/h]

Pressure p2 [bar]

Flow QN [Nm³/h]

34 Edition 1/2008 - © GCE UK 2008

Gas panel BMD 100-39 S

Single-stage, purity max 5 0 Inlet pressure 300 bar, outlet pressure 40 bar (N2) or 16 bar (O2) Gas24 037 120 N224 037 147 O2 + others

Features

This gas panel with semiautomatic change over for continuous gas flow is mounted onto a stainless steel panel and consists of two one-stage pressure regulators with inlet and outlet pressure gauge Optional acoustic and optical gas leakage monitoring via contact pressure gauges and signal device Check valves on both sides prevent the reflux of gas into the empty side The user is protected from making operating errors by clear display and operator control functions

Application For high flow process laser gas supply This gas panel is used to process such gas as Nitrogen, Hydrogen as well as rare gases (Argon/Helium) from cylinders or bundle batteries for the optical laser material processing It is to be used, when the central gas supply may not be interrupted

Technical data Body: brass 2 0402 CuZn40Pb2Bonnet: brass 2 0402 CuZn40Pb2Housing sealing: NBR 70° IRHSeat sealing ( for N2): PA 6 6 Zytel 103 DupontSeat sealing ( for O2): PA 6 6 Zytel 103 DupontPiston sealing (for N2): Silicon rubber 80° IRHDiaphragm (for O2): EPDM Ball valve sealing: PTFE, chamberedWorking temperature: -40 °C to 50 °CDimensions (WxHxD): 400 x 180 x 170 mmPressure gauge range: 0 - 400 bar, 0 - 65 barInlet: W21,8 x 1/14” Outlet: ball valve G ½“ f

Contact gauges on demand

20

30

20 40 60 80 100 120 140

FMD Uni 500 N2

40

10

0

p 50 bar1

p 31 bar1


Durchfluß Qn [Nm3/h]10 20 30 40 50 60 80

FMD Uni 500 O2

2

21 bar

15 bar



10

12

8

4

00 70

40 bar

Performance chart O2Performance chart N2


1 Cylinder connection2 Filter3 Convoluted hoses4 Pressure regulator5 Inlet pressure gauge6 Outlet contact pressure gauge7 Relief valve8 Outlet ball shut-off valve9 Process gas outlet

Pressure p2 [bar]

Flow QN [Nm³/h] Flow QN [Nm³/h]

Pressure p2 [bar]

35Edition 1/2008 - © GCE UK 2008

Gas panel BSMD 100 HF

Single-stage, purity max 5 0 Inlet pressure 300 bar (N2) or 230 bar (O2) Outlet pressure 0 - 40 bar (N2) / 0 - 20 bar (O2 + others)

Gas24 037 135 N224 037 352 O2

Features For material processing with laser process gases at high flow > 225 Nm³/h and 40 bar working pressure This gas panel, mounted on a stainless steel panel, consists of an inlet and an outlet pressure gauge, an outlet shut-off ball valve and two inlet connections (one could be closed by plug)

The BMD version (both inlets connected) allows manual change over from the empty side to the still full one The inlet connection integrated check valves prevent back flow Optional contact gauges serve a gas lack monitoring function

Application This gas panel supplies high flow process high pressure cutting gas (laser melt-cuttings) inside a central gas supply system Alternatively 1 or 2 gas cylinders or bundles and even a gas tank for high flow supply may be connected

Technical data Housing: brass 2 0402 CuZn40Pb2Seat seal (N2): PA 6 6 Zytel 103 DupontSeat seal (O2, Ar, CO2): PTFEPiston seal (N2):: Silicon rubber 80° IRHDiaphragm (O2, Ar, CO2): ButylBall valve seal: PTFEWorking temperature: -40 °C to 50 °C Dimension (WxHxD): 190 x 110 x 130 mmPressure gauge indication: 0 - 400 bar, 0 - 65 barInlet connection: W 21,8 x 1/14”Outlet: ball valve G 3/4“ f

1 First gas stock2 Additional gas stock3 High pressure hose4 Pressure regulator5 Inlet pressure gauge6 Outlet pressure gauge7 Relief valve9 Outlet ball valve10 Process gas outlet11 Check valve

20

25

5

15

10

00 90 1008070602010

Unicontrol UC500 HD

504030


Durchfluß [m3/h]

p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1


40

50

10

30

20

00 800700600200100


500400300


p = 300 bar1

p = 41 bar1

p = 21 bar1

p = 300 bar1

MR60 0732307

60

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

0,5

1,5

00 30105 252015


p = 20 bar1

1

p = 4 bar1

p = 3 bar1

p = 2 bar1

p = 20 bar1

p = 20 bar1

Durchfluß [m3/h]

Durchfluß [m3/h]

Durchfluß [m3/h]

Performance chart MR 60


Pressure p2 [bar]

Flow QN [Nm³/h] N2

36 Edition 1/2008 - © GCE UK 2008

Flow QN [Nm³/h] N2

Pressure p2 [bar]

Point-of-use regulator EMD 100-06

Single-stage, purity max 5 0 Inlet pressure 40/30 bar (N2), outlet pressure range 0 - 30 (N2) / 0 - 16 bar (O2 + others)

Gas24 037 055 N224 037 057 O2 + other HP gases

Features This single-stage regulator includes an outlet pressure gauge in safety version acc to EN 562, inlet ball shut-off valve and it can be mounted onto walls A relief valve at the outlet protects user and applications

Application For high flow laser process gases and constant supply pressure at the point of use To guarantee constant inlet pressure for laser process gas supply even when supply pressure during gas stock diminishing increases, this second pressure stage regulator is necessary Mounting takes place immediately at the inlet of the laser machining device The EMD 100-01 Nitrogen version is used for high pressure cutting (inert gas fusion cutting) as well as Oxygen cutting of metals with the Hydrogen version, and for inert gases (Ar/He)

Technical data Body: CW 617 CuZn40Pb2Housing: zinc alloy Zn Al3Housing sealing: NBR 70° IRHSeat sealing: Chloroprene rubber 80° IRHPiston sealing (for N2): Silicon rubber 80° IRHDiaphragm (for O2): EPDM Ball valve sealing: PTFE, chambered Working temperature: – 40 °C to 50 °C Dimensions (WxHxD): 120 x 300 x 150 mm Outlet pressure: 0 – 30 bar (N2), 0 – 16 bar (O2) Inlet: ball valve, G½” male Outlet: G 3/8“ EN 560 male

10 20 30 40 50 60 80

EMD Uni 700 O2

2

10

12

8

4

00 70



p1 = 13 bar

p1 = 13 bar

p1 = 13 bar

Performance chart O2Performance chart N2


Pressure p2 [bar]

Flow QN [Nm³/h] N2

37Edition 1/2008 - © GCE UK 2008

Gas supply panel for 2 cylinders BMD 500-35Single-stage, inlet pressure: 230 bar brass chromium plated, Diaphragm Hastelloy C, semiautomatic change overChange over pressure: 10,5 bar Inlet: stainless steel spiral tube or convoluted hosesOutlet: NPT ¼" femaleOrder code: Carbon dioxide BMD-500-35-BC-F10-CO2 Nitrogen BMD-500-35-BC-F10-N2 Helium BMD-500-35-BC-F10-He Argon BMD-500-35-BC-F10-Ar

Point-of-use pressure regulator EMD 500-06Single-stage, inlet pressure 40 barBrass chromium plated, diaphragm Hastelloy COutlet pressure: 1 - 10,5 bar Inlet: NPT ¼" f, outlet: NPT ¼" fOrder code: Carbon dioxide EMD-500-06-BC-E10-CO2 Nitrogen EMD-500-06-BC-E10-N2 Helium EMD-500-06-BC-E10-He

Gas supply panel for 1 cylinder SMD 500-25Single-stage, inlet pressure: 230 bar , process gas purgingBrass chromium plated, diaphragm Hastelloy COutlet pressure: 1 - 14 barInlet: stainless steel spiral tube or convoluted hosesOutlet: NPT ¼" fOrder code: Carbon dioxide SMD-500-25-BC-F14-CO2 Nitrogen SMD-500-25-BC-F14-N2 Helium SMD-500-25-BC-F14-He

Continuous gas supply with semiautomatic-change-over Gas Panel and Point-of-use regulator

Please keep care:

For gas panels with semiautomatic change-over the use of contact gauges and an alarm box for gas failure signalization is recommended, to insure an interruption free gas supply

Resonator Laser Gas Supply

These laser gas supply systems are standardized The GCEDruVa Pure Gas Program additionally offers much more solutions precisely designed for your personal demand

Cylinder connections can be delivered according to national norms AFNOR, BS, CGA, and others

Please contact our pure gas experts to get further information

Point-of-use pressure regulator EMD 500-06Single-stage, inlet pressure 40 barBrass chromium plated, diaphragm Hastelloy COutlet pressure: 1 - 10,5 bar Inlet: NPT ¼" f, outlet: NPT ¼" fOrder code: Carbon dioxide EMD-500-06-BC-E10-CO2 Nitrogen EMD-500-06-BC-E10-N2 Helium EMD-500-06-BC-E10-He

Gas supply with 1 cylinder, Gas Panel and Point-of-use regulator


38 Edition 1/2008 - © GCE UK 2008

Cylinder regulator FMD 230/232

For inert or flammable, compressed gases, purity up to 4 5 (99,995%), inclusive inlet and outlet pressure gauge and relief valve Outlet tube fitting 6 mm

Inlet Outlet

pressure pressure

Art No. Type Gases Stages Outlet (bar) (bar)6900 940 007 FMD 230 – 14 Helium, Carbon dioxide 1 200 0,5-10,56900 940 013 FMD 230 – 14 Nitrogen 1 200 0,5-10,56900 948 002 FMD 230 – 18 Helium, Carbon dioxide 1 metering valve 200 0,5-10,56900 948 007 FMD 230 – 18 Nitrogen 1 metering valve 200 0,5-10,56900 950 002 FMD 232 – 14 Helium, Carbon dioxide 2 200 0,5-106900 950 010 FMD 232 – 14 Nitrogen 2 200 0,5-106900 954 002 FMD 232 – 18 Helium, Carbon dioxide 2 metering valve 200 0,5-106900 954 005 FMD 232 – 18 Nitrogen 2 metering valve 200 0,5-10

FMD 230-14

FMD 232-18

Flow QN [Nm³/h] N2

Cylinder Connections DIN 477

Complete with outlet NPT ¼“ m

Art.-No. Type Threads GasesH 030 28 855 FA 1 W 21,8 × 1/14” LH flammable gases H 030 29 055 FA 6 W 21,8 × 1/14” inert gasesH 030 29 355 FA 9 R ¾” Oxygen, test gas with more than 21% Oxygen or synthetic air H 030 29 455 FA 10 W 24,32 × 1/14” NitrogenH 030 29 6113 FA 14 M 19 × 1,5 non corrosive test gas with less than 21% Oxygen Other inlet threads acc to national standards on demand

Outlet connections as option

Standard outlet tube fitting for 6 mm tube Optional outlet fittings can be ordered

Part.- no. Type 14 095 010 V1/8“ Tube fitting 1/8“ 14 095 010 T6 Hose nozzle for hose with inner diameter 6 mm


Pressure p2 [bar]

Performance chart

39Edition 1/2008 - © GCE UK 2008

Gas supply panels SMD 500-25

Single-stage, for laser resonator gas supply, purity max 6 0, inlet pressure 230 bar, outlet pressure range 1 - 14 bar, with internal gas purging and process gas outlet shut-off valve

Gas SMD-500-25-BC-F14-CO2 Carbon dioxideSMD-500-25-BC-F14-N2 Nitrogen SMD-500-25-BC-F14-He Helium

Features

These gas panels are mounted on a stainless steel panel and consist of a pressure regulator, inlet and outlet pressure gauges, a relief valve and shut-off valves at inlet and outlet for the process gas A choice of stainless steel coils or flexible high pressure hoses is available for the connection to the gas cylinder The use of contact pressure gauges (accessories) facilitates monitoring of the gas reserves

Application

This gas panel is permanently installed in a cylinder stock room or cabinet and reduces the cylinder pressure to a lower line pressure The gas is guided to the point-of-use via a subsequent pipeline The SMD 500-25 design allows shutting-off of gas flow during cylinder change with the panel itself

9

1

2

56

78

10

11

4 3

SMD 500-25

out

in

in

Technical dataBody material: stainless steel 316L (1 4404) specially cleaned and electro-polished or brass CW614 (CuZn39Pb3) specially cleaned, chromium platedSeat sealing: PCTFESealings: PCTFE, PVDF (brass)Relief valve seat material FKM, (EPDM, FFKM)*, EPDM, (FKM)* *on requestPressure gauge range: 0 - 25 bar (0 - 365 psi) 0 - 315 bar (0 - 4500 psi)Weight: 0,73 / 0,74/ 0,75 kg Dimensions (wxhxd): 250 x 155 x 185 mmPurge gas inlet: NPT ¼” f Inlet: M 14 x 1,5 For proper installation and service of this panel a gas specific spiral connection tube is necessary See in chapter Accessory

1 Cylinder connection2 Connection spirals3 Process gas inlet shut-off valve 4 Pressure regulator5 Inlet pressure gauge6 Outlet pressure gauge7 Process gas outlet shut-off valve 8 Process gas outlet 9 Relief valve 10 Purge gas outlet valve 11 Purge gas outlet


Pressure p2 [bar]

Performance chart

Flow QN [Nm³/h] N2

40 Edition 1/2008 - © GCE UK 2008

Single-stage, for inert, reactive, flammable and oxidizing gas and gas mixtures, purity max 6 0, inlet pressure 230 bar, outlet pressure range 1 - 14 bar, continuous gas supply even during cylinder change, fast manual switch-over to the reserve side, optional contact pressure gauges for gas supply failure monitoring, internal gas purging , connection for 2 x 1 cylinders, extension for 2 x 4 cylinders

Gas BMD-500-32-BC-F14-CO2 Carbon dioxideBMD-500-32-BC-F14-N2 Nitrogen BMD-500-32-BC-F14-He Helium BMD-500-32-BC-F14-Ar Argon

Features

This gas panels reduces the inlet pressure of maximum 230 bar to pressure levels of 1 to 50 bar The BMD 500 is mounted on a stainless steel panel and consists of a pressure regulator and inlet and outlet pressure gauges Process gas shut-off valves are located on the inlet side Enabled by switching over from the empty cylinder to the full one manually by opening/closing the shut-off valves the gas supply must not be interrupted during cylinder change The use of contact pressure gauges (accessories) monitors the minimum reserves for switching over in time The internal gas purging of the BMD 500-32 gives the opportunity to keep purity level constant during cylinder change

Application

The BMD 500-32 are gas panels for continuous gas supply and are applied at the first pressure level The benefit of this gas panel: fast switch-over to the reserve cylinders and the maintaining of gas supply (BMD 500-32: and purity) during cylinder change Standard application: centralized or decentralized gas supply for highly sensitive analysis device Technical dataBody material: stainless steel 316L (1 4404) specially cleaned and electro-polished or brass (CuZn39Pb3) specially cleaned, chromium platedSeat sealing: PCTFESealings: PCTFE, PVDF (brass)*Relief valve seat material FKM, (EPDM, FFKM)*, EPDM, (FKM)*, *on requestPressure gauge range: -1 - 18 bar (-15 - 260 psi) 0 - 315 bar (0 - 4500 psi)Weight: 1,5 kg Dimensions: (wxhxd): 400 x 200 x 185 mmInlet: M 14 x 1,5Outlet: tube fitting 6 mm For proper installation and service of this panel a gas specific spiral connection tube is necessary See in chapter Accessory

Gas supply panel BMD 500-32

1 Cylinder connection2 Connection spiral3 Process gas inlet shut-off valve 4 Pressure regulator - single-stage5 Inlet pressure gauge6 Outlet pressure gauge7 Process gas outlet8 Relief valve9 Purge gas outlet valve

34

6 5

7

8 9

22

1 1

9

out inin

8

12

3 6 9 12 15

Q max.

18 21 24 27

12 bar


Performance chart

Pressure p2 [bar]

Flow QN [Nm³/h] N2

3

41Edition 1/2008 - © GCE UK 2008

Gas supply panel BMD 500-35

Single-stage, for inert, reactive, flammable and oxidizing gas and gas mixtures, purity max 6 0, inlet pressure 230 bar, outlet pressure preset 14 bar For proper installation and service of this panel a gas specific spiral connection tube is nec-essary See in chapter Accessory GasBMD-500-35-BC-F14-CO2 Carbon dioxideBMD-500-35-BC-F14-N2 Nitrogen BMD-500-35-BC-F14-He Helium BMD-500-35-BC-F14-Ar Argon

Features

Pressure decrease of the active cylinder (or bundle) below a preset level causes semi-automatic switch over to the full cylinder side This is achieved by 2 integrated regulators (factory-set to slightly different delivery pressure levels), connected at their outlet ports Moving the lever towards the full battery side, this allows to disconnect and replace the empty cylinder without interrupting gas supply The lever position always indicates cylinder priority in being discharged

Optional contact pressure gauges, connected to an alarm box, indicate optical and audible alarm in case of pressure drop below a preset level That ensures empty tanks to be replaced in time Application

This gas panel supplying is necessary component, wherever uninterrupted process gas supply with semiautomatic change over is needed

Technical dataBody: stainless steel 316L (1 4404) specially cleaned and electro-polished or brass CW614 (CuZn39Pb3) specially cleaned, chromium platedSealings: PCTFE (SS), PVDF (brass)Relief valve seat material FKM, (EPDM, FFKM)*, EPDM, (FKM)*Pressure gauge range: -1 - 18 bar, 0 - 315 barDimensions: (wxhxd): 300 x 155 x 240 mmWeight: 5 2 kg (BMD 500-35)Preset outlet pressure: 14 bar +/-2 barFlow: 25 Nm³/h N² (12 bar - type at 25 bar inlet press )Suitable for cylinder connections: 2 x 1 up to 2 x 5 Inlet: M 14 x 1,5

1 pressure regulator2 inlet pressure gauge3 outlet pressure gauge4 process gas valve5 purge gas outlet valve6 safety relief valve7 spiral connection tube8 metal- mesh filter A, B gas cylindersH lever

BMD 500-35 in

out

in

Process gas

332 2

4 4

5

77

88

A B

6

BMD 500-35

8

12

3 6 9 12 15

Q max.

18 21 24 27

12 bar


Pressure p2 [bar]

Performance chart

Flow QN [Nm³/h] N2

42 Edition 1/2008 - © GCE UK 2008

Point-of-use pressure regulator EMD 500-06

Single-stage, for inert, reactive, flammable and oxidizing gas and gas mixtures, purity max 6 0, inlet pressure 40 bar, outlet pressure 1 bar - 10,5 bar Inlet valve with 90° shut-off function Clear open/closed position of shut-off valve

GasEMD-500-06-BC-E10-CO2 Carbon dioxideEMD-500-06-BC-E10-N2 Nitrogen EMD-500-06-BC-E10-He Helium

Features

The EMD 500-06 consists of inlet shut-off valve, pressure regulator, outlet pressure gauge and panel for wall mounting

Application

The EMD 500-06 is designed for the second pressure stage inside of a central gas supply system to reduce line pressure to a certain supply pressure level required at the point of use

Technical dataBody material: stainless steel 316L (1 4404) specially cleaned and electro-polished or brass CW614 (CuZn39Pb3) specially cleaned, chromium plated, 4 in-/outlet boringsSeat sealing: PTFESealings: PCTFE (SS), PVDF (brass)Pressure gauge range: -1 - 18 bar (-15 - 260 psi) 0 - 315 bar (0 - 4500 psi)Weight: 0 8 kgDimensions (wxhxd): 90 x 260 x 135 mm Inlet/Outlet: NPT ¼" f

1 = Inlet shut-off valve

2 = pressure regulator

3 = outlet pressure gauge

in

out


Pressure p2 [bar, psi]

12

8

4

00 5 10 15 20 25

Q max

Performance chart

Pressure p2 [bar]

Flow QN [Nm³/h] N2

43Edition 1/2008 - © GCE UK 2008

12

8

4

00 5 10 15 20 25

Q max

Point-of-use stations Plasma

Complete Point-of-use stations, assembled onto mounting bar, ready for wall installation

Type19 037 010 Hi Focus 160i19 037 011 Hypertherm 260 19 037 012 Hi Focus 280i

Technical dataInlet pressure: 30 barOutlet pressure: 0 - 13 barGas purity: 2 5 - 5 0Inlet: G½” f ball valve with brazing nippleOutlet: G¼” EN 560 for inert gases and Oxygen, G3/8” l h for Hydrogen and H mixturesSafety device optional: O2: EN 730-1 H2 (safe against return flashback up to 10 bar)

Point-of-use stations for Plasma applications

Hi Focus 180i

Hypertherm 260 Hi Focus 280i


Pressure p2 [bar]

Performance chart

Flow QN [Nm³/h] N2

44 Edition 1/2008 - © GCE UK 2008

Terminal Unit - Standard AFNOR

Wall surface mounting, side entryK 007 061 O2 K 007 062 Vacuum K 007 063 N2O K 007 064 AIR K 007 065 N2 K 007 066 CO2

Wall built in mounting, wall outlet K 007 071 O2 K 007 072 Vacuum

Bed head built in mounting, wall outlet K 007 081 O2 K 007 082 VacuumK 007 083 N2O

Medical Applications

GCE supplies the complete range of Hospital Central Gas Equipment CE-marked according to MDD and fulfilling relevant standards Below you find a small selection of products For more information, please contact your local GCE sales company

Medical Gas Manifold MM90

The single stage version manifold MM90 is designed to allow equal numbers of cylinders to be manifold together to give an operating bank and a reserve bank The manifold will deliver gas from the operating bank to the manifold pressure regulator until the cylinders are exhausted At that point the supply will switch to the reserve bank and the exhausted bank can be replenished The object is to give uninterrupted gas supply An alarm box is included To complete MM90, please add connecting pipes, high pressure valves and non return valves, high pressure hoses and cylinder retaining brackets MM90 is supplied with a gas alarm monitoring:

1 Too high or too low outlet pressure, 2 Leakage on the non-operating gas cylinder bank, 3 When change of operating side has been effected

The gas alarm is able to communicate with other equipment through relays and has a battery back-up for 30 minutes of operation. Gas072 7304 Oxygen072 7305 Air072 7306 Nitrous oxide, carbon dioxide

Technical DataInlet pressure: 200 barMax outlet pressure: 12 barCapacity: (at 9 bar outlet press ): 90 m³/h - Oxygen, Air 50 m³/h - Nitrous oxide, Carbon dioxide

Terminal Unit MC70 - Standard NORDIC

Bed Head Gas Outlet325 397 281 O2 MEDILINE B 325 397 282 N2O MEDILINE 325 397 283 Air MEDILINE 325 397 284 Vacuum MEDILINE 325 397 285 Outlet MEDILINE 325 397 286 Air MEDILINE 325 397 287 N2 MEDILINE 325 397 288 CO2 MEDILINE For Recessed mounting add092150 Wall box recessed gas outlet

All GCE Terminal Units are self-sealing, i e they close automatically when a connected apparatus is removed The terminal units are furnished with a quick connection valve which means that the desired apparatus can be connected or disconnected by means of a simple one-step motion

The terminal units may be mounted recessed in the wall, on the surface in an exposed position is required or inside a bed head unit

All terminal units of each standard have the same design but different colour coding and labels for different gases and of course gas specific non-interchangeable quick connection valves

45Edition 1/2008 - © GCE UK 2008

Central Gas Supply Accessory

Bundle connection module

Bundle connection compl AGA version

Bundle connection compl LINDE version

Bundle connection compl MG version, swivel nut

shortened 5 mm

Bundle connection compl BASI inlet adapter turned to

diam 10

Safety elements

Flash back arrestor FBA

Against Acetylene decomposition downstream the manifold regulator FBA shall prevent an Acetylene decomposition from operator side in the tube system 14 008 271 Flash back arrestor 11/1914 008 923 Flash back arrestor 12/25

Automatic quick acting shut off device Stops an Acetylene decomposition on the Acetylene high pressure side (cylinder bank or bundle) The use is obligatory from a common gas discharge out of 6 cylinders or one bundle GCE manyflow system for Acetylene are generally provided with 2 safety devices flash back arrestor and automatic quick acting shut-off device An extension from cylinder supply to bundle supply is always possible 14 037 561 Automatic quick acting shut-off device14 037 562 Connector G 3/4“

Important standards:

EN ISO 14114 for Acetylene manifolds.

EN ISO 15615 safety against Acetylene decomposition.

EN ISO 10 297 high pressure valves.

EN ISO 14113 high pressure hoses for Acetylene.

High pressure hoses - ACE

With non return valve and cylinder connection

Connection19 037 002 001 DIN 477- No 319 037 002 002 DIN 477- No 12 19 037 002 003 CGA 30019 037 002 004 AFNOR Type H19 037 002 005 UNI 4411 Other types on demand

Cylinder connection shows german standard

Flexible Hoses - ACE

Application Version Length114 037 334 Hose without non return valve for cylinders 800 mm19 037 002 001 Hose with non return valve 800 mm14 037 249 Hose for bundle RHÖNA 1500 mm14 037 841 Hose for bundle LINDE 1500 mm14 037 842 Hose for bundle MG 1500 mm14 037 843 Hose for bundle Basi 1500 mmAttention: GCE recommend a regular inspection of hoses after 5 years. These hoses are Acetylene decomposi-tion tested and fulfil the requirements of EN ISO 14113.

Flexible hoses with non return valve

14 037 493

Flexible hoses without without return valve

14 037 334

Accessory for pressure control units - ACE

14 037 141 Ball valve G½“ with elbow ACE14 037 159 Wall bracket14 037 271 Manyflow wall bracket, stainles steel14 037 297 Double nut G3/4“14 037 302 Manyflow plug, complete14 037 631 Ball vale 3/4“14 037 647 Adapter G½“ - 22 mm24 037 043 Ball valve ½“ with elbow24 037 136 Elbow connection MR6024 037 180 Elbow with ball valve MR60

Accessory Central Gas Supply

Other inlet threads acc to national standards on demand

46 Edition 1/2008 - © GCE UK 2008

Flexible hoses HP

Stainless steel coil tubes for high pressure applications up to 300 bar to complete the equipment gas specific Convoluted hoses are for security reasons equipped with a loop to avoid uncontrolled beating of the hose end in the case of hose rupture The advantage of a convoluted hose is to get a maximum of moving flexibility

Gas Inlet pr. [bar] Length [m] Connection14 037 440 Oxygen 200 0,814 037 445 300 0,814 037 441 Compr air 200 0,814 037 446 300 0,814 037 442 Nitrogen 200 0,814 037 447 300 0,814 037 443 Hydrogen 200 0,814 037 448 300 0,814 037 444 Ar/CO2 200 0,814 037 449 300 0,8

14 037 450 Oxygen 200 1,514 037 455 300 1,514 037 451 Compr air 200 1,514 037 456 300 1,514 037 452 Nitrogen 200 1,5 14 037 457 300 1,5 14 037 453 Hydrogen 200 1,5 14 037 458 300 1,5 14 037 454 Ar/CO2 200 1,5 14 037 459 300 1,5

K 140 485 Air 1,5 Spain type B 325 197 352 N2O 1,25 Spain215 191 024 O2/Inert 1 Spain DIN 6 PTFE 215 191 025 O2/Inert 2 Spain DIN 6 PTFE215 191 026 O2/Inert 3 Spain for bundle

K 140 470 C2H2 3 33x2 LH for bundle, LHK 140 471 Nitrogen 3 38x2 RH for bundleK 140 474 Oxygen 3 35x2 RH for bundle K 140 490 Compressed air 1,5 AFNOR type B cylinderK 140 491 Nitrogen 1,5 AFNOR type C cylinderK 140 495 Hydrogen 1,5 AFNOR type E cylinder, LHK 140 496 Oxygen 1,5 AFNOR type F cylinderK 140 498 C2H2 1,5 AFNOR type H cylinder, LH


Other inlet threads acc. to national standards on

demand.

Connecting pipes for cylinder manifolds

With retaining brackets of stainless steel, for 2 or 4 cylinders Gas Conn. thread Cylinders Length [mm]215 191 070 Fuel gas W 21,8 x 1/14“ LH EXT-INT 2 580 215 191 071 Fuel gas W 21,8 x 1/14“ LH EXT-INT 4 1160 215 191 072 Oxygen W 21,8 x 1/14“ RH EXT-INT 2 580215 191 073 Oxygen W 21,8 x 1/14“ RH EXT-INT 4 1160325 191 218 Oxygen W 21,8 x 1/14“ RH EXT-INT 6 290

Cylinder retaining brackets

Gas Conn. thread Cylinders Length [mm]215 191 007 Fuel gas W 21,8 x 1/14“ LH EXT-INT 1 290 215 191 008 Fuel gas W 21,8 x 1/14“ LH EXT-INT 2 580 215 191 012 Oxygen W 21,8 x 1/14“ RH EXT-INT 1 290215 191 013 Oxygen W 21,8 x 1/14“ RH EXT-INT 2 580

47Edition 1/2008 - © GCE UK 2008

Connecting pipe 90°

To connect manifolds with subsequent connecting tubes

Gas Conn. thread 215 191 005 Fuel gas W 21,8 x 1/14“ LH EXT-INT215 191 010 Oxygen W 21,8 x 1/14“ RH EXT-INT

Yoke

Stainless steel, with chain

215 191 074 for 1 cylinder215 191 075 for 2 cylinders

Non-return valve

This Non-Return Valve has to be mounted obligatory into an Acetylene gas supply not equipped with a VSP

Gas Inlet OutletA180 709 Non-return valve Acetylene ½”m 3/4”f

Bursting disk

This security device limits Acetylene system pressure exceeding the predefined limit

Gas InletA180 714 Bursting disk Acetylene ½”m

Flow limiter

Limits flow to 10 m³/h Only for Acetylene and horizontal assembly

Gas Inlet OutletA180 711 Flow limiter Acetylene 1”f 1”f

Purge valve

This valve allows continuing with gas supply during maintenance of change-over switch

Gas PressureK 140 512 Compressed gases 16 barK 140 514 Compressed gases 30 barK 140 513 Acetylene

Non return valves for connection pipes

Gas215 191 043 fuel gases 215 191 044 Oxygen

High pressure filter

Gas 215 190 041 Acetylene 215 191 086 fuel gases 215 190 042 Oxygen


48 Edition 1/2008 - © GCE UK 2008

Contact pressure gauges KI 50

Contact gauge acc to EN 562 (KI) with inductance contact, for monitoring gas supply pressure and shortage, nominal pressure 230 bar Explosion protection is available in conjunction with designated signal boxes The shift point, i e the pressure level which triggers the signal, can be reset as needed by setting the inspection glass indicator to the desired shift point Accuracy class 2 5 (DIN 16005) Diameter 50 mm Contact: inductive slit sensor (following NAMUR) Type of shielding: II 2 G EEx ia IIc T6, PTB 99 ATEX 2219 X Switching hysteresis: +/- 5 % (SEW)

Control behaviour: contact type 1 (I1), contact of low impedance with increasing pressure

Range

Art.-No. Type [bar] Material InletH 281 91 101 KI 50-315 I1 315 stainl steel NPT ¼“ mH 281 91 103 KI 50-315 I1 315 brass NPT ¼“ m

Alarm Box SENTINEL

This 2-channel version Alarm Box supervises the gas supply and avoids gas flow interruption by channel specific optical and acoustic alarm monitoring It might be used in two different applications: Inlet high pressure monitoring with one manifold or outlet low pressure monitoring with 2 manifolds Standard operating conditions are indicated by green light Alarm acknowledgement is done with a Alarm-stop button With a semi-automatic manifold the alarm box informs about switching from normal to reserve supply mode Features

Simultaneous monitoring of two channels•Programmable monitoring of each input (switch open or switch closed)•Output with relay unit•Acoustic alarm and 2 alarm lights•

K140 730 Alarm box A180 702 Low Pressure Switch FP6K Anti-deflagrating for AcetyleneA180 719 Low Pressure Switch FP6KQ Anti-deflagrating for Hydrogen

Technical dataInstallation: IP55 protection range, separate room to explosive gases, not outdoor suitablePower supply: 230 V~/50 Hz Consumption: 3 VA max Fuse: 100 mAChannels: Intensity in contacts # 0,5 mA Voltage in contacts: 5 VoltOutlet relay: max intensity 2A max voltage 230 V alternative


Contact pressure gauges for industrial manifolds

Range Art.-No. Type [bar] Gas InletXL2652 KI50 160 CO2 G¼”XL2651 KI50 40 C2H2 G¼”XL2340 KI50 400 G¼”

49Edition 1/2008 - © GCE UK 2008


Gas-Preheater

Inlet pressure max 300 bar, for Oxygen and inert gases The expansion of compressed gases i e argon and argon CO2 mixtures could require a gas preheater to prevent freezing of the regulator valve

19 008 004 Gas preheater

Technical dataPower supply: 230V - 50 Hz, 250 WInlet: W21,8x1/14“ male, DIN 6Outlet: W21,8x1/14“ female, DIN 6

® Betriebs- und Montageanleitung für zentrale Gasversorgung Typ Manyflow Operating instruction for central gas installation Type Manyflow

14.104.162 / 2 - 1 -

ZGV MANYFLOW BENUTZERHANDBUCH

OWNERS MANUAL

Central gas supplyOWNERS MANUAL

Manuals

14 104 162 Maniflow700 215 239 MIC 60MM3868 Maxiflow

A User’s guide “Maniflow” is generally added to our deliveries Beside rules and guidelines, you will receive detailed manuals and assembly instructions

50 Edition 1/2008 - © GCE UK 2008

Central Gas Supply Scheme

Bursting disk Outlet Point

Flow limiter Acetylene

Connection pipeElbow

Manifold withcontact gauges

Connectionpipe

Flexible hoseHigh pressure

Purge valve

Alarm box

Central Gas Supply Scheme

Safety, Flexibility and Economy

Avoiding dangerous move of gas cylinders around working area•Diminishment of accidents and incidents•Continuous gas supply by changing reserve with empty cylinders•Avoidance of bulky trolleys diminishing location space•Speedy change of empty cylinders at one single place•Diminishment of cylinder locations•Avoiding assembly or disassembly of cylinder regulators results in •less damage of regulators

Line Safety Relief Valve

51Edition 1/2008 - © GCE UK 2008

Cylinder Cylinder pressure pressure Cylinder Flow (20° C) (68° F) connection GasGas Formula rel. to N2 bar psi acc to DIN 477 charact. Acetylene C2H2 1,09 18 261 3 f Argon Ar 0,85 200 2900 6 i Pressure air DL 1 200 2900 13 o Ethylene C2H4 1,02 -68 -986 1 f/o Helium He 2,6 200 2900 6 i Carbon dioxide CO2 0,83 53,7 780 6 o Methane CH4 1,35 200 2900 1 f Propane C3H8 0,83 8,3 120 1 f Test gas 14 o Oxygen O2 0,96 200 2900 9 o Nitrogen N2 1 200 2900 10 o Synthetic air SL 1 200 2900 9 o Hydrogen H2 3,7 200 2900 1 f/o Declaration: f = flammable, i = Inert gas, p = poisonous, c = corrosive, o = others b = brass, ss = stainless steel

Gas data

European Cylinder connections

DIN 477 -1, 230 bar

No. Connection Gases1 W 21,80 x 1/14 LH Ethylene, Methane, Butane, Propane , Hydrogen, forming gas3 Clamp clip Acetylene5 G 3/8“ RH Carbon Monoxide6 W 21,80 x 1/14 Argon, Helium, Carbon dioxide7 G 5/8“ Sulfur dioxide8 W 1“ x 1/8“ Phosgen9 G ¾” Oxygen, Test gas (with Oxygen > 21 %)10 W 24,32x 1/14” Nitrogen11 G 3/8“ RH Nitrous oxide13 G 5/8” Compressed air14 M 19 x 1,5 LH Test gas (with Oxygen < 21 %)

DIN 477-5, 300 bar

No. Connection Gases 54 15,9 / 20,1 W 30 x 2 not flammable, non poisonous and not oxidizing gases and gas mixtures55 15,2 / 20,8 W 30 x 2 not flammable, poisonous and oxidizing gases and gas mixtures56 16,6 / 19,4 W 30 x 2 pressurized air57 15,2 / 20,8 W 30 x 2 LH flammable, not poisonous gases and gas mixtures58 15,9 / 20,1 W 30 x 2 LH flammable, poisonous and oxidizing or not oxidizing gases and gas mixtures59 17,3 / 18,7 W 30 x 2 Oxygen and oxidizing, non poisonous, not oxidizing gases and gas mixtures60 18 / 18 W 30 x 2 oxidizing, poisonous and/or oxidizing gases and gas mixtures

Appendix

52 Edition 1/2008 - © GCE UK 2008

GERMANY, AUSTRIA, SWITZERLAND, CZECH REPUBLIC, HUNGARY, POLAND, SCANDINAVIA, BALTIC STATES Outlet Chemical Outlet National Form GAS symbol Dimensions Standard No. Acetylene C2H2 Ø 15,3 x Ø 7,5 DIN 477 nr 3 4 AMMONIA NH3 W 21,8“ x 1/14“ DIN 477 nr 6 2 ARGON Ar W21,8 x 1/14“ DIN 477 nr 6 2 BUTANE C4H10 W21,8 x 1/14“ LH DIN 477 nr 1 2 CARBON DIOXIDE CO2 W21,8 x 1/14“ DIN 477 nr 6 2 CARBON MONOXIDE CO W 1“ x 1/8“ LH DIN 477 nr 5 2 CHLORINE Cl2 W 1“ x 1/8“ DIN 477 nr 8 2 COMPRESSED AIR G 5/8“ RH DIN 477 nr 13 1 ETHYLENE OXIDE C2H4O W 21/8“ x 1/14“ LH DIN 477 nr 1 2 HELIUM He W21,8 x 1/14“ DIN 477 nr 6 2 HYDROGEN H2 W21,8 x 1/14“ LH DIN 477 nr 1 2 METHANE CH4 W21,8 x 1/14“ LH DIN 477 nr 1 2 NITROGEN N2 W 24,32 x 1/14“ DIN 477 nr 10 2 NITROUS OXIDE N2O G 3/8“ RH DIN 477 nr 11 2 OXYGEN O2 G 3/4“ DIN 477 nr 9 2 PHOSGENE COCl2 W 1“ x 1/8“ DIN 477 nr 8 2 PROPANE C3H8 W21,8 x 1/14“ LH DIN 477 nr 1 2 REFRIGERANT W21,8 x 1/14“ DIN 477 nr 6 2 SULPHUR DIOXIDE SO2 G 5/8“ DIN 477 nr 7 2

HOLLAND, BELGIUMAcetylene C2H2 Ø 20 x Ø 9 NEN3268 YOKE 4 G 5/8” LH NEN3268 LI2 1 AMMONIA NH3 W1“ x 1/8“ NEN3268 RU 4 2 ARGON Ar W24,32 x 1/14“ NEN3268 RU 3 2 BUTANE C4H10 W21,8 x 1/14“ LH NEN3268 LU 1 2 CARBON DIOXIDE CO2 W21,8 x 1/14“ NEN3268 RU 1 2 CARBON MONOXIDE CO W1“ x 1/8“ LH NEN3268 LU 4 2 CHLORINE Cl2 W1“ x 1/8“ NEN3268 RU 4 2 COMPRESSED AIR W28, 8 x 1/14“ NEN3268 RU 6 2 ETHYLENE OXIDE C2H4O W 1“ x 1/8“ LH NEN3268 LU 4 2 HELIUM He W24,32 x 1/14“ NEN3268 RU 3 2 HYDROGEN H2 W21,8 x 1/14“ LH NEN3268 LU 1 2 METHANE CH4 W21,8 x 1/14“ LH NEN3268 LU 1 2 NITROGEN N2 W 24,32 x 1/14“ NEN3268 RU 3 2 NITROUS OXIDE N2O W21,8 x 1/14“ NEN3268 RU 1 2 OXYGEN O2 G 5/8“ NEN3268 RI 2 1 PHOSGENE COCl2 W1“ x 1/8“ NEN3268 RU 4 2 PROPANE C3H8 W21,8 x 1/14“ LH NEN3268 LU 1 2 REFRIGERANT W21,8 x 1/14“ NEN3268 RU 1 2 SULPHUR DIOXIDE SO2 W1“ x 1/8“ NEN3268 RU 4 2

FRANCE Acetylene C2H2 Ø 21 x Ø 10mm N FE 29-650/A 4 Ø 22,91 x 1,814 LH N FE 29-650/H 1 AMMONIA NH3 Ø 21,7 x 1,814 N FE 29-650/C 2 ARGON Ar Ø 21,7 x 1,814 N FE-29-650/C 2 BUTANE C4H10 Ø 21,7 x 1,814 LH N FE 29-650/E 2 CARBON DIOXIDE CO2 Ø 21,7 x 1,814 N FE 29-650/C 2 CARBON MONOXIDE CO Ø 21,7 x 1,814 LH N FE 29-650/E 2 CHLORINE Cl2 Ø 25,4 x 31,75 N FE 29-650/J 2 ETHYLENE OXIDE C2H4O Ø 21,7 x 1,814 LH N FE 29-650/E 2 HELIUM He Ø 21,7 x 1,814 N FE 29-650/C 2 HYDROGEN H2 Ø 21,7 x 1,814 LH N FE 29-650/E 2 METHANE CH4 Ø 21,7 x 1,814 LH N FE 29-650/E 2 NITROGEN N2 Ø 21, 7 x 1, 814 N FE 29-650/C 2 NITROUS OXIDE N2O Ø 26 x 1,5 N FE 29-650/G 1 OXYGEN O2 Ø 22,91 x 1,814 N FE 29-650/F 1 PHOSGENE COCl2 Ø 27 x 2 N FE 29-650/K 2 PROPANE C3H8 Ø 21,7 x 1,814 LH N FE 29-650/E 2 REFRIGERANT Ø 21,7 x 1,814 N FE 29-650/C 2 SULPHUR DIOXIDE SO2 Ø 27 x 2 N FE 29-650/K 2

Appendix

/4

Gas Control EquipmentPRODUCT FROM THE GCE GROUP

Cylinder ValvesTable of outlet connections for

the most popular gases

ACETYLENE C2H2 Ø 15,3 x Ø 7,5 DIN 477 nr.3 4

AMMONIA NH3 W 21,8// x 1/14// DIN 477 nr.6 2

ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

BUTANE C4H10 W 21, 8 x 1/14// LH DIN 477 nr.1 2

CARBON DIOXIDE CO2 W 21, 8 x 1/14// DIN 477 nr.6 2

CARBON MONOXIDE CO W 1// x 1/8// LH DIN 477 nr.5 2

CHLORINE Cl2 W 1// x 1/8// DIN 477 nr.8 2

COMPRESSED AIR G 5/8// RH DIN 477 nr.13 1

ETHYLENE OXIDE C2H4O W 21/8// x 1/14// LH DIN 477 nr.1 2

HELIUM He W 21, 8 x 1/14// DIN 477 nr.6 2

HYDROGEN H2 W 21, 8 x 1/14// LH DIN 477 nr.1 2

METHANE CH4 W 21, 8 x 1/14// LH DIN 477 nr.1 2

NITROGEN N2 W 24, 32 x 1/14// DIN 477 nr.10 2

NITROUS OXIDE N2O G 3/8// RH DIN 477 nr.11 2

OXYGEN O2 G 3/4// DIN 477 nr.9 2

PHOSGENE COCl2 W 1// x 1/8// DIN 477 nr.8 2

PROPANE C3H8 W 21, 8 x 1/14// LH DIN 477 nr.1 2

REFRIGERANT W 21, 8 x 1/14// DIN 477 nr.6 2

SULPHUR DIOXIDE SO2 G 5/8// DIN 477 nr.7 2

1

2

3

2

5

GERMANYAUSTRIA

SWITZERLANDCZECH REPUBLIC

HUNGARYPOLAND

SCANDINAVIABALTIC STATES

Chemical Outlet National OutletGAS symbol Dimensions Standard Form

No.

Outlet Form Numbers

1 2 3 4

certifikováno/certificated

GCE Autogen, s. r. o.

ISO 9001

1 Scandinavia and Switzerland outlet G 3/4 internal2 Scandinavia outlet W24.323 Czech outlet G 3/4 external4 Hungary G 1/2 external5 Scandinavia, Hungary, Czech & Baltic States W21.8 outlet

Ref: CVC 1

/4






ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

















1

2

3

2

5

GERMANYAUSTRIA


HUNGARYPOLAND



No.

Outlet Form Numbers

1 2 3 4



ISO 9001


Ref: CVC 1

/4






ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

















1

2

3

2

5

GERMANYAUSTRIA


HUNGARYPOLAND



No.

Outlet Form Numbers

1 2 3 4



ISO 9001


Ref: CVC 1

/4






ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

















1

2

3

2

5

GERMANYAUSTRIA


HUNGARYPOLAND



No.

Outlet Form Numbers

1 2 3 4



ISO 9001


Ref: CVC 1

Cylinder outlet forms

53Edition 1/2008 - © GCE UK 2008

Outlet Chemical Outlet National Form GAS symbol Dimensions Standard No. Acetylene C2H2 W 22 91 LH int YOKE 4 MIE AP7 1AMMONIA NH3 W 21 7 x 1/14LH MIE AP7 2 ARGON Ar W 21 7 x 1/14 MIE AP7 2 BUTANE C4H10 W 21 7 x 1/14LH MIE AP7 2 CARBON DIOXIDE CO2 W 21 7 x 1/14 MIE AP7 2 CARBON MONOXIDE CO W 21 7 x 1/14LH MIE AP7 2 CHLORINE Cl2 W 31 75 x 1/7 MIE AP7 2 COMPRESSED AIR M 30 x 1 75 MIE AP7 3 ETHYLENE OXIDE C2H4O W 21 7 x 1/14LH MIE AP7 2 HELIUM He W 21 7 x 1/14 MIE AP7 2 HYDROGEN H2 W 21 7 x 1/14LH MIE AP7 2 METHANE CH4 W 21 7 x 1/14LH MIE AP7 2 NITROGEN N2 W 21 7 x 1/14 MIE AP7 2 NITROUS OXIDE N2O R 3/8 MIE AP7 2 OXYGEN O2 W 22 91 x 1/14 MIE AP7 1 PHOSGENE COCl2 W 25 4 x 1/8 MIE AP7 2 PROPANE C3H8 W 21 7 x 1/14LH MIE AP7 2 SULPHUR DIOXIDE SO2 R 5/8 MIE AP7 2

ITALY Acetylene C2H2 Ø 20 x Ø 10mm UNI 4411/1 4 G 5/8“ Sin UNI 441½ 1 AMMONIA NH3 W 30 1/14“ Sin UNI 4407 2 ARGON Ar W 24,5 1/14“ UNI 4412 1 BUTANE C4H10 W 20 1/14“ Sin UNI 4405/P 2 CARBONDIOXIDE CO2 2 CARBON MONOXIDE CO W 21,7 1/14“ UNI 4406 2 CHLORINE Cl2 W 1“ 1/8“ UNI 4408 2 COMPRESSED AIR W 30 1/14“ UNI 4410 2 ETHYLENE OXIDE C2H4O W 20 1/14“ Sin UNI 4405/H 2 HELIUM He W 24,5 1/14“ UNI 4412 1 HYDROGEN H2 W20 1/14“ Sin UNI 4405/H 2 METHANE CH4 W 20 1/14“ Sin UNI 4405/H 2 NITROGEN N2 W 21,7 1/14“ UNI 4409 1 NITROUS OXIDE N2O G3/8“A UNI 9097 2 OXYGEN O2 W 21,7 1/14“ UNI 4406 2 PHOSGENE COCl2 W 21,7 1/14“ UNI 4406 2 PROPANE C3H8 W 20 1/14“ Sin UNI 4405/P 2 REFRIGERANT W 21,7 1/14“ UNI 4406 2 SULPHUR DIOXIDE SO2 W 20 1/14“ Sin UNI 4405/H 2

UNITED KINGDOM Acetylene C2H2 G 5/8“ LH BS 341 nr 2 1 AMMONIA NH3 G ½“ A BS 341 nr 10 2 ARGON Ar G 5/8“ RH BS 341 nr 3 1 BUTANE C4H10 G 5/8“ LH BS 341 nr 4 1 CARBON DIOXIDE CO2 0,860“ x 14 TPI BS 341 nr 8 2 CARBON MONOXIDE CO G 5/8“ LH BS 341 nr 4 1 CHLORINE Cl2 G 5/8“ A BS 341 nr 6 2 COMPRESSED AIR G 5/8“ RH BS 341 nr 3 1 ETHYLENE OXIDE C2H4O G 5/8“ A LH BS 341 nr 7 2 HELIUM He G 5/8“ RH BS 341 nr 3 1 HYDROGEN H2 G 5/8“ LH BS 341 nr 2 1 METHANE CH4 G 5/8“ LH BS 341 nr 2 1 NITROGEN N2 G 5/8“ RH BS 341 nr 3 1 NITROUS OXIDE N2O 11/16“ x 20 TPI BS 341 nr 13 2 OXYGEN O2 G 5/8“ RH BS 341 nr 3 1 PHOSGENE COCl2 G 5/8“A BS 341 nr 6 2 PROPANE C3H8 G 5/8“ LH BS 341 nr 4 1 REFRIGERANT G 5/8“ A BS 341 nr 6 2 SULPHUR DIOXIDE SO2 G ½“ A BS 341 nr 10 2

Appendix

/4






ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

















1

2

3

2

5

GERMANYAUSTRIA


HUNGARYPOLAND



No.

Outlet Form Numbers

1 2 3 4



ISO 9001


Ref: CVC 1

/4






ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

















1

2

3

2

5

GERMANYAUSTRIA


HUNGARYPOLAND



No.

Outlet Form Numbers

1 2 3 4



ISO 9001


Ref: CVC 1

/4






ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

















1

2

3

2

5

GERMANYAUSTRIA


HUNGARYPOLAND



No.

Outlet Form Numbers

1 2 3 4



ISO 9001


Ref: CVC 1

/4






ARGON Ar W 21, 8 x 1/14// DIN 477 nr.6 2

















1

2

3

2

5

GERMANYAUSTRIA


HUNGARYPOLAND



No.

Outlet Form Numbers

1 2 3 4



ISO 9001


Ref: CVC 1

Cylinder outlet forms

SPAIN, PORTUGAL

54 Edition 1/2008 - © GCE UK 2008

CATP

ACGS

01 E

ditio

n 1

/200

8, G

CE A

B, M

alm

ö, S

wed

en H

R+TP

Alte

ratio

ns a

re su

bjec

t to

chan

ge w

ithou

t not

ice ©

GCE

200

8

GCE worldwide

BENELUXGCE GmbH Guus MeistersNL- 6466 AP KerkradeTel: +31 - (0)475 - 53 75 00MT: +31 - 653 273 629guus meisters@gcegroup com

Sweden, Denmark, Finland, Norway, Lithuania, Estonia,Iceland, LatviaGCE Norden ABBox 21044S-200 21 Malmö, SwedenTel: +46-40-38 8307Fax: +46-40-30 8344info@gcenorden sehttp://www gcenorden se

PortugalGCE sasRua de Vila Boa, nº10, casa 16PT-4520-160 FeiraTel: +351 256 373 682Fax: +351 256 378 260americo ribeiro@gcegroup com

AustriaGCE GmbH Manfred SöllnerA-4651 Stadl-PauraTel: +43 - (0)7234 - 87 950Fax: +43 - (0)7234 - 88 069MT: 0664 - 35 17 703manfred soellner@gcegroup com

FranceGCE Charledave s a s 6, rue de Gérigny, B P 110F-58404 La Charité-sur-LoireTel: +33/3 86 69 46 00Fax: +33/3 86 70 09 15fabrice faucard@gcegroup comhttp://www gcesa fr

Hungary, Bulgaria, RomaniaGCE Hungary Kft Rákoczi Ferenc út 90/b H-2314 HalásztelekTel: +36-24-521-200Fax: +36-24-452-400 peter magoss@gcegroup comhttp://www gce hu

ItalyGCE Mujelli S p a Via F Ili Cervi, 11 I-37036 S MartinoTel:+39-458-780 525Fax: +39-458-780 750mujelli@mujelli ithttp://www mujelli it

Poland, Armenia, Azerbaijan,Belarus, Georgia, Moldavia,Russia, Slovakia, UkraineGCE Sp z o o ul Drapinska 12 PL-03-581 Warsaw Tel: 022-677-70-80 Fax: 022-678-39-95gce@gce plhttp://www gce pl

SwitzerlandGCE GmbH Armin SchauD-66504 BottenbachTel: +49 - (0)63 39 - 40 94 36 MT: +49 - (0)171 - 43 02 893armin schau@gcegroup com

SpainGCE IbéricaCalle Juan de Olias 21, 1°E-28020 MadridTel: 00 34 91 57 11 470Fax: 00 34 91 57 12 756etienne masson@@gcegroup com

Czech RepublicGCE s r o Zizkova 381CZ-583 81 ChoteborThe Czech RepublicTel: +420 569-66 11 11Fax: +420 569-66 11 07www gce cz

United Kingdom, IrelandGCE Ltd Yew Tree Way, Stone Cross ParkGolborne, Warrington WA3 3JDTel: +44 - 1942 29 29 50Fax: +44 - 1942 29 29 77sales@gceuk comhttp://www gceuk com

Croatia, Greece, Macedonia, Slovenia, TurkeyGCE Croatia d o o Bistranska 11HR-10290 Zapresic, CroatiaTel: +385 (1) 33 111 27Fax: +385 (1) 33 111 84branko nikolac@gcegroup com

GermanyGCE GmbH In den Straußwiesen 4D-36039 Fulda Tel: +49-(0)661 - 8393-0 Fax: +49-(0)661- 8393-25/31info-autogen@gcegmbh de

GCE world-wide: http://www.gcegroup.com

Subsidiaries

USAGCE Inc 4457 Bethany Road, Building HMason, OH 45040Tel: +1 513 459 1540Fax: +1 513 459 0249todd campbell@gcegroup com

PR of China GCE Co , Ltd No 4 Building, 318 Xiao Wan Road Fengpu Ind Dev ParkFengpu, Fengxian CountyShanghai 201401Tel: +86-21-37 198 408Fax: +86-21-37 198 617elisa qu@gcegroup com

GCE world-wide: http://www.gcegroup.com

Austria, Belgium, France, Netherlands, Luxembourg, Portugal, Spain, Switzerland, Bulgaria, Croatia, Czech Republic, Hungary, Poland, Romania

Scandinavia, United Kingdom, Ireland Middle East, North Africa, India

Armenia, Azerbaijan, Belarus, Georgia, Moldavia, Russia, Slovakia, Ukraine USA, Caribbean, Canada, South America

Australia, New Zealand, China

Cutting and •Welding SystemsGas supply Systems •for Industries

High Pressure Valves •for all gasesResidual Pressure •ValvesMachine Cutting •EquipmentIndustrial Process •Application Equipment

Oxygen Therapy •SystemsGas Supply •Systems for HospitalsEmergency •Gas Systems

CUttinG & WELdinG

MEdiCALPRoCESS APPLiCAtionS HiGH PURitY

Regulators •and valvesGas Supply •Panels and

SystemsAccessory•

Central+Gas+Supply+Catalogue+Jan+31st+2008

Documents

Transcript of Central+Gas+Supply+Catalogue+Jan+31st+2008