Cemul SL - Sport Seat Product Catalogue
-
Upload
jose-maria-vazquez -
Category
Documents
-
view
231 -
download
5
description
Transcript of Cemul SL - Sport Seat Product Catalogue
Product Catalogue
CEMUL, S.L.Carretera del Ramal, 1108338 Premià de Dalt (Barcelona) - EspañaTels. +34 93 752 30 76 / +34 629 630 943e-mail: [email protected]
- 2 -
Acerca de Cemul, S.L.
CEMUL, appears in the national
and international market as
manufacturer for sport seats,
offering a wide range of products
and solutions covering all possible
customer requirements.
Relying on cutting-edge
technologies for plastic and metal
CEMUL offers high performance
and security products under strict
quality controls.
All this guarantees the quality of
our products and has positioned
our company as a reference in the
market, which has been endorsed
by its prestigious contributions
to the national and international
arena.
- 3 -- 2 - - 3 -- 3 -
Monobloc SeatsMonoblock seats are produced in one single piece. Perfectly suitable to install in sport’s grandstands
Tip-Up SeatsSeats consisting in separated seat and backrest that can be installed at the grandstand in a 216mm space width when the seat is folded.
Telescopic Grandstand SeatsHereby you can find all our seats suitable to install in telescopic grandstands.
VIP SeatsSeats for VIP and presidential boxes.
Journalists’ TablesHereby you can find our journalists’ table offer.
Our products:
- 4 -
Generales Features
-100% Recyclable, HD High-quality Polypropylene
-Fire behaviour classification M3 (M2, optional) UNE 23727
-Light Resistance Additive anti UV DIN 54003
-Bending strength according to standard DIN 53455
Polymers
Many of our products match the FIFA and UEFA standards (backrest height between 300 and
350 mm, depth between 350 and 400 mm and width between 400 and 480 mm).
UEFA and FIFA standards
- 5 -- 4 -
Metallic StructuresManufactured with steel, minimum thickness of 2 mm and made of 34/37 Quality steel. All
welds are continuous arc-type.
Indoors treatment:
-100% Polyester paint made with electrostatic powder, minimum thickness of 70-80
microns.
Tratamiento para exteriores:
-100 % Polyester paint made with powder, cataphoresis base, minimum thickness of 120
microns and more than 1000 hours of resistance to saline mist, according to standard
ASTM B- 117-64.
-Galvanized by heat immersion by 99,95% zinc, with minimum thickness of 60-70
microns. Corrosion resistance (marine atmosphere) 2,4 microns/year complies with
UNE EN ISO-24 standard
Anchoring:
Securing is performed by 6.8 cal metal Rawl, in reinforced concrete structures with
minimum thicknesses of 90 mm. For other types of materials and environments there
are also Fisher type Rawls, chemical Rawl (the nuts and bolts supplied are DYNABOLT
T- 10 Mx8x60 metal Rawl).
- 6 -- 6 -
Seat with 350 mm back’s height, over grandstand installation
-Anatomic Shell injected in High-impact Polypropylene with antistatic and UV treatment
for outdoor use
-Direct fixation by means of two contact points over grandstand
-Drainage system
-Approved for Barcelona-92 Olympic Games
-Complies with UEFA y FIFA regulation
-Seat numbering and flame-retardance treatment (optional)
-P: 1.559 Kg / V: 0,020 m3
Monoblock Seats
B-92 SG
- 7 -- 6 -- 6 - - 7 -
Anatomic Shell injected in High-impact Polypropylene with antistatic and UV treatment for
outdoor use:
-Support steel tube 50x 2 epoxy painted or galvanized
-Direct fixation over grandstand by three special screws
-Drainage system
-Approved for Barcelona-92 Olympic Games
-Complies with UEFA y FIFA regulation
-Seat numbering and flame-retardance treatment (optional)
-P:3.950 Kg / V: 0,045 m3
B-92 FG
- 8 -- 8 -
Anatomic Shell injected in High-impact Polypropylene with antistatic and UV treatment for
outdoor use:
-Support steel tube 80x40x2 with a plastic end piece at either end
-The holding bar rests on feet, which are made of 160x 2 mm round steel tube ending in a
160 mm diameter circular plate with three anchorage points. Poxy painted or galvanized.
-For indoor, electrostatic powder epoxy. For outdoor, galvanizing type hot immersion in
zinc 99,95%
-Drainage holes
-Anti-slide ridding on the seat
-Approved for Barcelona-92 Olympic Games
-Seat numbering and flame-retardance treatment (optional)
B-92 BANC
Monoblock Seats
- 9 -- 8 -- 8 - - 9 -
No-back seat, over grandstand and telescopic grandstand installation:
-Monoblock, self-bearing shell seat molded by injection
-In stabilized High-quality copolymer
-Shiny surface, sealed around the whole of perimeter to prevent dirt from accumulating
inside the seat, easy cleaning
-Fixing in a two central anchoring points over grandstand
-Central drainage
-Anti-slide ridding on the seat
-Seat numbering (optional)
-P:0.700 Kg / V: 0,016 m3
S-94 SG
- 10 -
Seat with 120mm back’s height, installation over grandstand or telescopic grandstand:
-Monoblock, self-bearing shell-seat molded by injection
-In highly stabilized quality copolymer
-Shiny surface, sealed around the whole of perimeter to prevent dirt from accumulating
inside the seat, easy cleaning
-Fixing in a single central anchoring point over grandstand
-Central drainage
-Anti-slide ridding on the seat
-Seat numbering (optional)
-P: 0,920 Kg / V: 0,019 m3
S-90 SG
Monoblock Seats
- 11 -- 10 - - 11 -
Seat with 300 mm back’s height, over grandstand and telescopic grandstand installation
-Monoblock, self-bearing Shell seat molded by injection
-In stabilized High-quality copolymer
-Shiny surface, sealed around the whole of perimeter to prevent dirt from accumulating
inside the seat, easy cleaning
-Direct fixation two contact point over grandstand
-Central Drainage
-Anti-slide ridding on the seat
-Complies with UEFA y FIFA regulation
-Seat numbering (optional)
-P: 1,525Kg / V: 0,025 m3
S-97 SG
- 12 -
Seat with 300 mm back’s height, front-fixed grandstand installation
-Anatomic shell injected in High-impact Polypropylene with antistatic and UV treatment
for outdour use
-Support steel tuve 50x2 epoxy painted or galvanized
-Direct fixation over grandstand by three special screws
-Drainage system
-Seat numbering and flame retardant treatment (optional)
-P: 3.900 Kg / V: 0,045 m3
S-97 FG
Monoblock Seats
- 13 -- 12 -
Seat with 325 mm back’s height, over grandstand installation:
-Anatomic Shell injected in High-impact.Polypropylene with antistatic and UV treatment
for outdoor use
-Shiny surface, sealed around the whole of perimeter to prevent dirt from accumulating
inside the seat, easy cleaning
-Anti-slide ridding on the seat
-Direct fixation two contact points over grandstand
-Drainage system
-Complies with UEFA y FIFA regulation
-Seat numbering and flame retardant treatment (optional)
-P:1.550 Kg / V: 0,020 m3
S-92 SG
- 14 -
Seat with 375 mm back’s height, adaptable to four legs’ chair.
S-95 SILLA
Monoblock Seats
- 15 -- 14 -
Tip-Up SeatsSeats consisting in separated seat and backrest that can be installed at the grandstand in a 216mm space width when the seat is folded.
- 16 -
Tip-Up Seats
Fixed-back and reclining seat by gravity without spring
-Anatomic Shell injected in High-impact Polypropylene with antistatic and UV treatment
for outdoor use.
-Individual seat fixed front-stand with four wholes to fix at the wall.
-Metallic structure manufactured with steel ST 34-37 laminated in cold and built up by
5 mm plates. Finish epoxi paint or galvanizing.
-Anti-slide ridding on the seat.
-Seat numbering (optional).
-W:6.900 Kg / V: 0,050 m3
S-96 FG
- 17 -- 16 -
By gravity folding automatic seat system consisting of two independent components (back and
seat), set on metallic structure
-Anatomic Shell injected in High-Impact Polypropylene with antistatic and UV treatment
for outdoor use.
-Seat back mounted on metallic structure over 80x40x2 mm steel rod.
-The holding bar rests on feet consisting in 160x2 mm round steel tube ending in a 160 mm
diameter circular plate with tree anchorage points. Poxy painted or galvanized.
-Anti-slide ridding on the seat.
-Seat and row numbering and metallic arms with armrest in polyurethane (optional).
-W:7,500 Kg / V: 0,050 m3
S-96 BANC
- 18 -
By gravity folding automatic seat system consisting of two independent components (back
and seat), set on metallic structure
-Anti-slide ridding on the seat.
-Fixed at the floor, with special anchorages.
-Seat back mounted on metallic structure over 80x40x2 mm steel rod, painted in epoxy
or galvanized.
-Backrest is fixed to the metallic structure by means of anti-oxidizing screws.
-Common metallic structure can set groups of 3 or 4 places
-Cases in seat and back of laminated composite cut open cell foam and sheadhed with
tissue Trevira Cs Fire.
-Seat and row numbering and metallic arms with armrest in polyurethane (optional).
S-96 VIP
Tip-Up Seats
- 19 -- 18 -
Telescopic Grandstand SeatsHereby you can find all our seats suitable to install in telescopic grandstands.
- 20 -
Seat with 120mm back’s height, installation over grandstand or telescopic grandstand
-Monobloque, self-bearing shell-seat molded by injection.
-In highly stabilized quality copolymer.
-Shiny surface, sealed around the whole of perimeter to prevent dirt from accumulating
inside the seat, easy cleaning.
-Fixing in a single central anchoring point over grandstand.
-Central drainage.
-Anti-slide ridding on the seat.
-Seat numbering (optional).
-W: 0,920 Kg / V: 0,019 m3
S-90 TT
Telescopic Grandstand Seats
- 21 -- 20 -
No-back seat, over grandstand and telescopic grandstand installation
-Monobloque, self-bearing shell seat molded by injection.
-In stabilized High-quality copolymer.
-Shiny surface, sealed around the whole of perimeter to prevent dirt from accumulating
inside the seat, easy cleaning.
-Fixing in a two central anchoring points over grandstand.
-Central drainage.
-Anti-slide ridding on the seat.
-Seat numbering (optional).
-W:0.700 Kg / V: 0,016 m3
S-94 TT
- 22 -
Seat with 300 mm back’s height, over grandstand and telescopic grandstand installation.
-Monobloque, self-bearing Shell seat molded by injection.
-In stabilized High-quality copolymer.
-Shiny surface, sealed around the whole of perimeter to prevent dirt from accumulating
inside the seat, easy cleaning.
-Direct fixation two contact point over grandstand.
-Central Drainage.
-Anti-slide ridding on the seat.
-Complies with UEFA y FIFA regulation.
-Seat numbering (optional.
-P: 1.525 Kg / V: 0,025m3
S-97 TT
Telescopic Grandstand Seats
- 23 -- 22 -
Folding seat system, automatic by gravity, consisting of two separate pieces of seat and back
injected in polypropylene and mounted on metal structure allowing to fix it to the grandstand
and folding the back in “book form”.
-Anatomic Shell injected in High-impact Polypropylene with antistatic and UV treatment
for outdoor use.
-Metallic structure manufactured with steel ST 34-37 laminated in cold and built up by 5
mm plates. Finish paint.
-Anti-slide ridding on the seat.
-Seat numbering (optional).
-W:0.700 Kg / V: 0,016 m3
S-96 GTR
- 24 -
Bench system consisting of steel structure hosting the anti-siding seat (injected
polypropylene). Using manual spring allows slaughtered so the entire package can be
installed on grandstand. The bench system can be closed and folded into 200 mm height.
-Anatomic Shell injected in High-impact Polypropylene with antistatic and UV treatment
for outdoor use.
-Metallic structure manufactured with steel ST 3-37 laminated in cold and built up by 5
mm plates. Finish paint.
-Anti-slide ridding on the seat.
-Seat numbering (optional).
-W:0.700 Kg / V: 0,016 m3
S-96 TT
Telescopic Grandstand Seats
- 25 -- 24 -
Folding chair fixed to the top of te step with side
standards manufactured in injected aluminium. The
seat is fixed to the step while the back folds on top
of it together with the armrests. Total height of the
chair folded is 170 mm.
Seat and back are manufactured with patented
UNIBLOCK system and polypropylene shells.
Traditional upholstery with detachable covers and
wooden shells are also available.
MICRA-500
W: 16,5 Kg / V: 0,08 m3
Structure:
-Arc welded steel tube and sheet
Polyurethane foam:
-Seat density: 65 Kg/m3
-Back density: 57,5 Kg/m3
Paint:
-Electrostatic epoxi powder
-Coat thickness 90/100 Micron
-Adherence to the gris: 100%
Safety:
-Fabric: M-1 0 y 1
-Foam: M-4 5
-Fire Barrier: M-1 (optional) 5 (optional)
- 26 -
MICRA SG
Telescopic Grandstand Seats
Folding chair fixed to the top of te step with side standards manufactured in injected aluminium.
The seat is fixed to the step while the back folds on top of it together with the armrests. Total height
of the chair folded is 170 mm.
Seat and back are manufactured with patented UNIBLOCK system and polypropylene shells. Traditional
upholstery with detachable covers and wooden shells are also available.
W: 16,5 Kg / V: 0,08 m3
Structure:
-Arc welded steel tube and sheet
Polyurethane foam:
-Seat density: 65 Kg/m3
-Back density: 57,5 Kg/m3
Paint:
-Electrostatic epoxi powder
-Coat thickness 90/100 Micron
-Adherence to the grid: 100%
Safety:
-Fabric: M-1 0 y 1
-Foam: M-4 5
-Fire Barrier: M-1 (optional) 5 (optional)
- 27 -- 26 -
VIP SeatsSeats for VIP and presidential boxes
- 28 -
MICRA FG
Butacas VIP
Holding chair on metal bar fixed to the riser of the step with side standards manufactured in injected
aluminium. The chair is automatically closed with a single movement when the spectator stands up.
Total envelope of the chair when closed is 170mm.
Seat and back are manufactured with patented UNIBLOCK system and polypropylene shells. Traditional
upholstery with detachable covers and wooden shells are also available.
W: 16,5 Kg / V: 0,08 m3
Structure:
-Arc welded steel tube and sheet
Polyurethane foam:
-Seat density: 65 Kg/m3
-Back density: 57,5 Kg/m3
Paint:
-Electrostatic epoxi powder
-Coat thickness 90/100 Micron
-Adherence to the grid: 100%
Safety:
-Fabric: M-1 0 y 1
-Foam: M-4 5
-Fire Barrier: M-1 (optional) 5 (optional)
- 29 -- 28 -
MICRA PC
Holding chair on metal bar and fixed to the riser of the step with side standards manufactured in
injected aluminium. The chair is automatically closed with a single movement when the spectator
stands up. The total envelope of the chair when closed is 170mm.
Seat and back are manufactured with patented UNIBLOCK system and polypropylene shells. Traditional
upholstery with detachable covers and wooden shells are also available.
W: 17 Kg / V: 0,08 m3
Structure:
-Arc welded steel tube and sheet
Polyurethane foam:
-Seat density: 65 Kg/m3
-Back density: 57,5 Kg/m3
Paint:
-Electrostatic epoxi powder
-Coat thickness 90/100 Micron
-Adherence to the grid: 100%
Safety:
-Fabric: M-1 0 y 1
-Foam: M-4 5
-Fire Barrier: M-1 (optional) 5 (optional)
- 30 -
BOGART STADIUM
Butacas VIP
-Seat centres: 54 cm / 21.259” - straight rows
-Back: Overall height 95 cm / 37.401”. UNIBLOCK upholstery system. Textured polypropylene outer back.
-Seat: Tip up with double spring. UNIBLOCK upholstery system. Textured polypropylene seat shell with perforations for
acoustics.
-Standard: Fully textured polypropylene. Concealed fixing.
-Armrest: Injected and textured polypropylene with integrated cupholder.
-Row numbering: Round plastic plate on aisle standard.
-Seat numbering: Round plastic cap on seat shell, round plastic plate on seat, or back outer shells.
-W: 16,8 Kg / V: 0,130 m3
Polyurethane foam:
-Seat density: 65 Kg / m3
-Back density: 54 Kg / m3
Structure of injection molded processes:
-High impact polypropylene copolymer
-Resistance to tearing: DIN 53455
-Resistance to impact: DIN 53453
-Resistance to bending: DIN 53452
Safety:
-Fabric: M1 (UNE 23727)
-Foam: M4 (UNE 23727)
-Optional Fire Barrier: M1 (UNE 23727)
- 31 -- 30 -
Journalists’ TablesHereby you can find our journalists’ table offer
CEMUL, S.L.
Carretera del Ramal, 11
08338 Premià de Dalt (Barcelona) - España
Phone: +34 93 752 30 76 / +34 629 630 943
e-mail: [email protected]