1

Cement Flow Table Motorised/Manual Model

PRODUCT CODE:

PRODUCT STANDARDS:

PRODUCT DESCRIPTION:

There are two models of the Cement Flow Table, the TCM- 0060/A conforming to ASTM and the TCM-0060/E conforming to the

EN standard. Both are used for determining the consistency of

mortar, lime and cement specimens. Manual and motorized

The hand operated model is fitted with a hand wheel. The motor

operated model is driven by a motor speed reducer through a

mechanical coupling at the rate of 1 revolution per second. The

number of drops is preset on a counter and the machine

stops automatically at the end of the cycle.

EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical mould is made of brass and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height. ASTM model; the table is manufactured from brass and has 254 mm diameter. The conical mould is made of brass has

dimensions of 100 mm base dia. X 70 mm top dia. X 50 mm height

Both models are supplied complete with brass flow mould and tamper. 60 Hz versions are available and should be mentioned on

your order if required.

TCM-0060/A

TCM-0061/A

TCM-0062/A

TCM-0063/A

TCM-0063/A/110 TCM-0060/E

TCM-0061/E

TCM-0062/E

TCM-0063/E

Cement Flow Table ASTM, metric

Cement Flow Mould ASTM , metric

Tamper ASTM Hardwood 13x25x150 mm

Motorized Cement Flow Table ASTM,

220-240 V 50 Hz

Motorized Cement Flow Table ASTM,

110 V 60 Hz

Cement Flow Table EN

Cement Flow Mould EN

Tamper EN Ø 40x200 mm 250g

Motorized Cement Flow Table EN,

220-240 V 50 Hz

ASTM C230; EN 459-2, 1015-3

TCM-0060/A

TCM-0060/E

TCM-0063/A

TCM-0063E

TCM-0062/A

TCM-0061/A

TCM-0062/E

TCM-0061/E

TCM-0060/A TCM-0060/E TCM-0060/A TCM-0063/E ASTM EN Table Diameter 254mm 300mm Cone Base/Top Diameter 100mm/70mm 100mm/70mm Cone Height 50mm 60mm Drop Height 12.7mm 10.0mm Dimensions: Manual 260x260x270mm Motorised 470x360x350mm Weight: Manual 13kg Motorised 36kg Power: 180W – Motorised.