Cembre Hydraulic Cable Cutters and Cable Cutting Tools

128

INDUSTRIAL APPLICATION

TC 050

Hand operated hydraulic tool specifically designed to cut copper, aluminium and telecommu-nications cables having a max overall diameter of 50 mm. The tool fea-tures a double speed action: a fast advancing speed for rapid approach of the blades to the cable and a slow-er more powerful speed for cutting. The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can be easily opened to allow the cutting of running cables.

The head can rotate through 90 de-grees, to enable the operator to work in the most comfortable position. HT-TC051 features an auto-matic safety valve to bypass oil

Hydraulic cutting head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)TC050 features the same cutting capability as HT-TC051.

Hydraulic cutting head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)TC050 features the same cutting


TC 050

capability as HT-TC051.

Hand operated hydraulic tool specifically designed to cut copper, aluminium and telecommu-nications cables having a max overall diameter of 50 mm. The tool fea-tures a double speed action: a fast advancing speed for rapid approach of the blades to the cable and a slow-er more powerful speed for cutting. The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can be easily opened to allow the cutting of running cables.

The head can rotate through 90 de-grees, to enable the operator to work in the most comfortable position. HT-TC051 features an auto-matic safety valve to bypass oil

HYDRAULIC CUTTING HEAD

general features

Hand operated hydrau-lic tool specifically designed to cut copper, aluminium and tele-communications cables having a max overall diameter of 65 mm. The tool features a double speed action. The blades are manufactured from high strength special steel, heat treated to ensure a long service life. The head can be easily opened to al-low the cutting of running cables.

HYDRAULIC CUTTING TOOL

general features

The head can rotate through 320 degrees, to enable the operator to work in the most comfortable position.HT-TC065 features an automatic safety valve to bypass oil when reach-

Hand operated hydrau-lic tool specifically designed to cut copper, aluminium and tele-communications cables having a max overall diameter of 65 mm. The tool features a double speed action. The blades are manufactured from high strength special steel, heat treated to ensure a long service life. The head can be easily opened to al-low the cutting of running cables.

general features

The head can rotate through 320 degrees, to enable the operator to work in the most comfortable position.HT-TC065 features an automatic safety valve to bypass oil when reach-

ing maximum pressure; a pressure release device can also be operated at any stage of operation.

when reaching maximum pressure; a pressure release device can also be operated at any stage of opera-tion.


general features

S T O R A G E

Type Dimensions mm Weightkg

Suppliedwith the tool

Purchase separately

Canvas Bag 010 545x160 0,15 �� —

Maxcutting Ø

mmWeight

kglength width

D i m e n s i o n s m m

50 497 129 4,38


HT-TC051


HT-TC065

S T O R A G E



Purchase separately

Canvas bag 010 545x160 0,15 �� —

Maxcutting Ø

mmWeight

kglength width


65 523 129 5

S T O R A G E



Purchase separately

Canvas bag 011 360x137 0,13 �� —

Maxcutting Ø

mm

Max operatingpressure

barWeight

kglength width


50 700 325 112 3,2

Canvas bag 011 360x137 0,13 �� —

at any stage of operation.

Pamela Kinnell

Address Stamp

129

Hand operated hydraulic tool specifically designed to

cut copper, aluminium and tel-ecommunications cables having a max overall diameter of 85 mm.New model, self contained, robust and sturdy.

The tool features a double speed action:

a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cutting.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can easily be opened to al-low the cutting of running cables, and can rotate through 180 degrees, to enable the operator to work in the most comfortable position.HT-TC0851 features an automatic safety valve to bypass oil when reach-ing maximum pressure; a pressure release device can also be operated at any stage of operation.


general features

Hydraulic cutting head complete with

quick automatic coupler for con-nection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)

TC085 features the same cutting capability as HT-TC0851.


general features

S T O R A G E



Purchase separately

VAL P7 727x202xh115 1,3 �� —

Maxcutting Ø

mmWeight

kglength width


85 652,5 175 6,6

S T O R A G E



Purchase separately

VAL TC 085 465x155xh65 2,4 �� —

Maxcutting Ø

mm


barWeight

Kglength width


85 700 409 135 4,9


HT-TC0851


TC 085INDUSTRIAL APPLICATION

TC 085

Hydraulic cutting head complete with

quick automatic coupler for con-nection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)

TC085 features the same cutting capability as HT-TC0851.


general features

Purchase separately

—

WeightKg

85 700 409 135 4,9

Hand operated hydraulic tool specifically designed to

cut copper, aluminium and tel-ecommunications cables having a max overall diameter of 85 mm.New model, self contained, robust and sturdy.

The tool features a double speed action:

a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cutting.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can easily be opened to al-low the cutting of running cables, and can rotate through 180 degrees, to enable the operator to work in the most comfortable position.HT-TC0851 features an automatic safety valve to bypass oil when reach-ing maximum pressure; a pressure release device can also be operated at any stage of operation.


S T O R A G E

Dimensions mm Weightkg


Purchase separately

—

85 652,5 175 6,6

HT-TC0851

VAL TC 085 465x155xh65 2,4 ��

VAL P7 727x202xh115 1,3 VAL P7 727x202xh115 1,3 ��

130

Hydraulic cutting head specifically designed to cut copper and alu-minium cables having a max overall diameter of 95 mm.

The head is complete with a quick automatic coupler for connection to a hydraulic pump with a work-ing pressure of 700 bar max, (see page 162-166).


general features

S T O R A G E



Purchase separately

VAL 096 450x265xh145 6,8 �� —

Maxcutting Ø

mm


barWeight

kglength width


95 700 397 249 7,9

Handle designed for ease of operation


TC 096

Hydraulic cutting head specifically designed to cut copper and alu-minium cables having a max overall diameter of 95 mm.

The head is complete with a quick automatic coupler for connection to a hydraulic pump with a work-


general features

Type Dimensions mm

VAL 096 450x265xh145 6,8

Maxcutting Ø

mm


bar

95 700 397 249 7,9


TC 096

131

Hydraulic cutting head specifically designed to cut copper, aluminium and telecommunications cables having a max overall diameter of 120 mm.

The head can easily be opened to cut running cables, and the handle allows the most comfortable posi-tioning of the head onto the cable to be cut.

The head is complete with a quick automatic coupler for connection to a hydraulic pump with a work-ing pressure of 700 bar max, (see page 162-166).


general features

S T O R A G E



Purchase separately

VAL TC 120 590x209xh84 4,9 �� —

Maxcutting Ø

mm


barWeight

kglength width


120 700 536 175 9,5

T C 1 2 0 c u t t i n g c a p a c i t y - a f e w e x a m p l e s :3x150 mm2 steel armoured Ø80 mm1000 mm2 Cu - EPR rubber insulated; Ø85 mm1000 mm2 Cu - EPR rubber insulated + lead sheath; Ø92 mm1000 mm2 Cu - EPR rubber insulated + lead sheath + PE sheath; Ø100 mm240 mm2 EPR rubber insulatedC

able

typ

e

Opening head, to allow cutting

of running cables

Handle designed for ease of operation


TC 120

Hydraulic cutting head specifically designed to cut copper, aluminium and telecommunications cables having a max overall diameter of 120 mm.

The head can easily be opened to cut running cables, and the handle allows the most comfortable posi-tioning of the head onto the cable to be cut.

general features

S T O R A G E



Purchase separately

VAL TC 120 590x209xh84 4,9 �� —

Maxcutting Ø

mm


barWeight

kglength width


120 700 536 175 9,5

T C 1 2 0 c u t t i n g c a p a c i t y - a f e w e x a m p l e s :3x150 mm2 steel armoured Ø80 mm2 steel armoured Ø80 mm2

1000 mm2 Cu - EPR rubber insulated; Ø85 mm2 Cu - EPR rubber insulated; Ø85 mm2

1000 mm2 Cu - EPR rubber insulated + lead sheath; Ø92 mm2 Cu - EPR rubber insulated + lead sheath; Ø92 mm2

Cab

le t

ype


TC 120

132

Hydraulic cutting head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)

TC025 has the same cutting ca-pability as HT-TC026.


general features

Hand operated hydraulic tool spe-cifically designed to cut copper, aldrey, aluminium, aluminium-steel cables and steel ropes, aluminium and steel rods having a max overall diameter of 25 mm.The tool features a double speed action: a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cutting.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can rotate through 180 degrees, to enable the operator to work in the most comfortable posi-tion, and can easily be opened to allow the cutting of running cables.HT-TC026 features an automatic safety valve to bypass oil when reach-ing maximum pressure; a pressure release device can also be operated at any stage of operation.


general features

S T O R A G E



Purchase separately

Canvas bag 001 430x155 0,15 �� —

S T O R A G E



Purchase separately

Canvas bag 007 350x105 0,13 �� —

Maxcutting Ø

mm


barWeight

kglength width


25 700 213 82 2,0

Maxcutting Ø

mmWeight

kglength width


25 382 129 3,2

OVERHEAD LINE APPLICATION

HT-TC026


TC 025

132

Hydraulic cutting head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)

TC025 has the same cutting ca-pability as HT-TC026.

general features

S T O R A G E



Purchase separately

Canvas bag 007 350x105 0,13 �� —

Maxcutting Ø

mm


barWeight

kglength width


25 700 213 82 2,0


TC 025

C U T T I N G C A P A C I T Y

MATERIALTENSILE

STRENGTH(daN/mm2)

HT-TC026 HT-TC026YTC 025 B-TC026 (2)

MAX CUTTING DIAMETER (mm)

COPPER ≤ 41 25 25 ALUMINIUM ≤ 20 25 25 ALMELEC ≤ 34 25 25

MULTI STRANDS STEEL ≤ 180 - 18 (STRANDS Qty ≥ 200) 25 25

STEEL ≤ 60 10 13 ≤ 42 - 16 COPPER ≤ 30 - 20 ≤ 25 16 23 ALUMINIUM ≤ 16 25 25

RO

PE

S &

CO

ND

UC

TOR

SR

OD

S

INDICATIVE EXAMPLES: (2) 7 x 3,0 : Ø est. = 9,0 mm (1) (2) 19 x 2,1 : Ø est. = 10,5 mm (1) (2) 19 x 2,2 : Ø est. = 11,0 mm (2) 19 x 2,3 : Ø est. = 11,5 mm

STEEL ≤ 180

ACSR ≤ 180

B35-TC025 (1)

INDICATIVE EXAMPLES:(1) (2) 26 x 2,50 + 7 x 1,95 : Ø est. = 15,85(1) (2) 26 x 3,06 + 7 x 2,38 : Ø est. = 19,38(1) (2) 26 x 3,60 + 7 x 2,80 : Ø est. = 22,80

Hand operated hydraulic tool spe-cifically designed to cut copper, aldrey, aluminium, aluminium-steel cables and steel ropes, aluminium and steel rods having a max overall diameter of 25 mm.The tool features a double speed action: a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cutting.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can rotate through 180 degrees, to enable the operator to work in the most comfortable posi-


general features

Type Dimensions mm

Canvas bag 001 430x155 0,15

Maxcutting Ø

mm

25 382 129 3,2


HT-TC026

MATERIAL

COPPER ALUMINIUM ALMELEC

RO

PE

S &

CO

ND

UC

TOR

S

STEEL

Canvas bag 001 430x155 0,15


HT-TC026 HT-TC026Y


Dimensions mm

Canvas bag 001 430x155 0,15

133


general features

S T O R A G E



Purchase separately

Canvas Bag 001 430x155 0,15 �� —

Maxcutting Ø

mmWeight

kglength width

D i m e n s i o n s mm

25 394,5 129 3,35


HT- TC026Y

Hand oper-ated hydraulic

tool specifically de-signed to cut copper,

aldrey, aluminum, alumi-num-steel cables, stay wire

and steel ropes having a max overall diameter of 25 mm and steel earthing rod up to 16 mm. The tool features a double speed action.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can rotate through 180 degrees, to enable the operator to work in the most comfortable posi-tion, and can easily be opened to allow the cutting of running cables.HT-TC026Y features an automatic safety valve to bypass oil when reach-ing maximum pressure; a pressure release device can also be operated at any stage of operation.

Ideal for earthing rod and stay wire

HT-TCO26Y c u t t i n g c a p a c i t y - a f e w e x a m p l e s : Ø

EARTHING RODS AND STAY WIRESmm in.12,7 1/2” STEEL EARTHING ROD, COPPER PLATED; Tensile strength = 79 daN/mm2

14,2 / STEEL EARTHING ROD, COPPER PLATED; Tensile strength = 69 daN/mm2

15,6 / STEEL EARTHING ROD; Tensile strength = 69 daN/mm2

15,9 5/8” STEEL EARTHING ROD, COPPER PLATED (CON ED - ILLINOIS); Tensile strength = 57 daN/mm2

15,9 5/8" STEEL EARTHING ROD, COPPER PLATED (CON ED - STATEN ISLAND); Tensile strength = 78 daN/mm2

19 3/4” STEEL EARTHING ROD, COPPER PLATED; Tensile strength = 74 daN/mm2

9,15 (3,05x7) / STAY WIRE10,8 (3,6x7) / STAY WIRE (PORTLAND GENERAL ELECTRIC)11,1 (3,7x7) / STAY WIRE (PORTLAND GENERAL ELECTRIC)12,3 (4,1x7) / STAY WIRE (PORTLAND GENERAL ELECTRIC)12,6 (4,2x7) / STAY WIRE (PORTLAND GENERAL ELECTRIC)


general features

S T O R A G E



Purchase separately

—

Maxcutting Ø

mmWeight

kglength width


25 394,5 129 3,35

Hand oper-ated hydraulic

tool specifically de-signed to cut copper,

aldrey, aluminum, alumi-num-steel cables, stay wire

and steel ropes having a max overall diameter of 25 mm and steel earthing rod up to 16 mm. The tool features a double speed action.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The head can rotate through 180 degrees, to enable the operator to work in the most comfortable posi-tion, and can easily be opened to allow the cutting of running cables.HT-TC026Y features an automatic safety valve to bypass oil when reach-ing maximum pressure; a pressure release device can also be operated at any stage of operation.

Ideal for earthing rod and stay wire


HT- TC026Y

Canvas Bag 001 430x155 0,15 ��

134

S T O R A G E



Purchase separately

VAL P7 727x202xh115 1,3 �� —

Maxcutting Ø

mmWeight

kglength width


40 550 144 5,8


general features


general features

Hydraulic cutting head complete with quick automatic coupler for con-nection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)TC04 has the same cutting capabil-ity as HT-TC041.


TC 04

Hand operated hydraulic tool spe-cifically designed to cut copper, aldrey, aluminium, aluminium-steel cables and steel ropes, aluminium and steel rods having a max overall diameter of 40 mm.New model, even more self con-tained, robust and sturdy.The blades are manufactured from high strength special steel, heat treated to ensure a long service life. The head can rotate through 180 degrees, to enable the opera-tor to work in the most comfortable position, and can easily be opened to allow cutting of running cables.

HT-TC041 features an automatic safety valve to bypass oil when reaching maximum pressure; a pres-sure release de-vice can also be operated at any stage of operation.


HT-TC041

INDICATIVE EXAMPLES:26 x 2,50 + 7 x 1,95 : Ø est. = 15,8526 x 3,06 + 7 x 2,38 : Ø est. = 19,3826 x 3,60 + 7 x 2,80 : Ø est. = 22,8054 x 3,50 + 19 x 2,10 : Ø est. = 31,5054 x 4,36 + 19 x 2,62 : Ø est. = 39,20

MATERIALTENSILE

STRENGTH(daN/mm2)

HT-TC 041 TC 04 B-TC04 B-TC0405


COPPER ≤ 41 40 ALUMINIUM ≤ 20 40 ALMELEC ≤ 34 40

MULTI STRANDS STEEL ≤ 180 18 (STRANDS Qty ≥ 200) 40

STEEL ≤ 60 18 ≤ 42 20 COPPER ≤ 30 30 ≤ 25 32 ALUMINIUM ≤ 16 40

RO

PE

S &

CO

ND

UC

TOR

SR

OD

SINDICATIVE EXAMPLES:

7 x 3,0 : Ø est. = 9,0 mm19 x 2,1 : Ø est. = 10,5 mm19 x 2,3 : Ø est. = 11,5 mm

STEEL ≤ 180

ACSR ≤ 180


Maxcutting Ø

mm


barWeight

kglength width


40 700 311 100 4,0

134


general features

Hydraulic cutting head complete with quick automatic coupler for con-nection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)TC04 has the same cutting capabil-ity as HT-TC041.


TC 04

S T O R A G E



Purchase separately

VAL 04 350x125xh68 2,0 �� —

to allow cutting of running cables.

HT-TC041 features an automatic safety valve to bypass oil when reaching maximum pressure; a pres-

VAL 04 350x125xh68 2,0 �� —

135


general features

S T O R A G E



Purchase separately

Canvas Bag 010 545x160 0,15 �� —

Maxcutting Ø

mmWeight

kglength width


50 503 129 4,7

Hand operated hydraulic tool specifically designed to cut

copper, aluminum, aluminum-steel cables (ACSR) having a max overall diameter of 50 mm.The HT-TC051Y is provided with a two stage hydraulic system, which advances the blades quickly to the cable. This proven system saves operator time and effort.The HT-TC051Y is provided with an automatic safety valve to bypass oil when reaching max pressure.This means safety to the operator and protection to the blades.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The shape of the blades provides a “clean” cut. The head can be opened to allow cutting of running cables and ropes. The head rotates 90 degrees allow-ing the operator to perform the cut in the most comfortable position.The tool is supplied complete with canvas bag 010 for protection and storage when not in use.


HT-TC051Y

Hydraulic cutting head complete with quick auto-matic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166).TC 050Y features the same cut-ting capability as HT-TC051Y.


general featuresOVERHEAD LINE APPLICATION

TC 050Y

S T O R A G E



Purchase separately

Canvas bag 011 360x137 0,13 �� —

Maxcutting Ø

mm


barWeight

kglength width


50 700 331 112 3,3

Not suitable for cutting stay wire, steel rope or earthing rod.



HT-TC051YHYDRAULIC CUTTING TOOL

general features

S T O R A G E



Purchase separately

Canvas Bag 010 545x160 0,15 �� —

Maxcutting Ø

mmWeight

kglength width


50 503 129 4,7

Hand operated hydraulic tool specifically designed to cut

copper, aluminum, aluminum-steel cables (ACSR) having a max overall diameter of 50 mm.The HT-TC051Y is provided with a two stage hydraulic system, which advances the blades quickly to the cable. This proven system saves operator time and effort.The HT-TC051Y is provided with an automatic safety valve to bypass oil when reaching max pressure.This means safety to the operator and protection to the blades.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The shape of the blades provides a “clean” cut. The head can be opened to allow cutting of running cables and ropes. The head rotates 90 degrees allow-ing the operator to perform the cut in the most comfortable position.The tool is supplied complete with canvas bag 010 for protection and


135

Hydraulic cutting head complete with quick auto-matic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166).TC 050Y features the same cut-ting capability as HT-TC051Y.


general featuresOVERHEAD LINE APPLICATION

TC 050Y

S T O R A G E



Purchase separately

Canvas bag 011 360x137 0,13 �� —

Maxcutting Ø

mm


barWeight

kglength width


50 700 331 112 3,3


Canvas bag 011 360x137 0,13 ��

Canvas Bag 010 545x160 0,15 ��

136

Hand oper-ated hydraulic tool specifically designed to cut copper, aldrey, alumini-um, aluminium-steel cables and steel ropes, aluminium and steel rods having a max overall diameter of 55 mm.The HT-TC055 is provided with a two stage hydraulic system, which advances the blades quickly to the cable. This proven system saves operator time and effort.The HT-TC055 is provided with an automatic safety valve to bypass oil when reaching max pressure.This means safety to the operator and protection to the blades.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.The shape of the blades provides a “clean” cut.


general features

Maxcutting Ø

mmWeight

kglength width


55 595 144 8,3

S T O R A G E



Purchase separately

VAL P7 727x202xh115 1,3 �� —


HT-TC055

Hand oper-ated hydraulic tool specifically designed to cut copper, aldrey, alumini-um, aluminium-steel cables and steel ropes, aluminium and steel rods having a max overall diameter of 55 mm.The HT-TC055 is provided with a two stage hydraulic system, which advances the blades quickly to the cable. This proven system saves operator time and effort.The HT-TC055 is provided with an automatic safety valve to bypass oil when reaching max pressure.This means safety to the operator and protection to the blades.

general features

Maxcutting Ø

mm length


55 595 144 8,3

S T O R A G E


VAL P7 727x202xh115 1,3


HT-TC055

high strength special steel, heat treated to ensure a long service life.The shape of the blades provides a


general features

Hydraulic cutting head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)TC055 has the same cutting capa-bility as HT-TC055.

S T O R A G E



Purchase separately

VAL TC055 384x231x145 3,7 �� —

Maxcutting Ø

mm


barWeight

kglength width


55 700 357 134 6,6

general features

Hydraulic cutting head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166)TC055 has the same cutting capa-bility as HT-TC055.

VAL TC055 384x231x145 3,7

55 700 357 134 6,6

The head can be opened to allow cutting of running cables and ropes. The head rotates 330 degrees al-lowing the operator to perform the cut in the most comfortable position.The tool is supplied complete with plastic case VAL P7 for protection and storage when not in use.

INDICATIVE EXAMPLES:26 x 2,50 + 7 x 1,95 : Ø est. = 15,8526 x 3,06 + 7 x 2,38 : Ø est. = 19,3826 x 3,60 + 7 x 2,80 : Ø est. = 22,8026 x 4,44 + 7 x 3,45 : Ø est. = 28,1454 x 3,50 + 19 x 2,10 : Ø est. = 31,5054 x 4,36 + 19 x 2,62 : Ø est. = 39,2083 x 4,60 + 16 x 2,80 : Ø est. = 50,00

MATERIALTENSILE

STRENGTH(daN/mm2)

HT-TC055B-TC055


COPPER ≤ 41 55 ALUMINIUM ≤ 20 55 ALMELEC ≤ 34 55

MULTI STRANDS STEEL ≤ 180 22 (STRANDS Q.TY ≥ 200) 50

7 x 4,77 : Ø est. =14,30 mm

STEEL ≤ 60 20 ≤ 42 22 COPPER ≤ 30 34 ≤ 25 38,5 ALUMINIUM ≤ 16 50

RO

PE

S &

CO

ND

UC

TOR

SR

OD

SINDICATIVE EXAMPLES:

7 x 3,0 : Ø est. = 9,0 mm19 x 2,1 : Ø est. = 10,5 mm19 x 2,3 : Ø est. = 11,5 mm

STEEL ≤ 180

ACSR ≤ 180


GUY WIRE(GW15-9/16-188)

Extra highstrenght grade


TC 055

VAL TC055 384x231x145 3,7 �� —

Pamela Kinnell

Address Stamp

Cembre Hydraulic Cable Cutters and Cable Cutting Tools

Technology

Transcript of Cembre Hydraulic Cable Cutters and Cable Cutting Tools