CECCATO ‘CSM Maxi’ 10 & 15 hp - National Air Compressors CSM Maxi Brochure... · Unit 36, 17...
If you can't read please download the document
Transcript of CECCATO ‘CSM Maxi’ 10 & 15 hp - National Air Compressors CSM Maxi Brochure... · Unit 36, 17...
-
Unit 36, 17 Lorraine St, Peakhurst, NSW, 2210
www.nationalaircompressors.com.au
Ph (02) 9534 5522 Fax (02) 9534 5426
CECCATO CSM Maxi
10 & 15 hp ROTARY SCREW AIR CENTRES
Manufactured in Italy, in accordance with
KEY FEATURES
Highly Efficient Rotary Screw Airend IP55 Electric Motor Energy Saving ES99 Electronic Controller Star Delta Starter Oil Cooler Intake Air Filter Spin-on Oil Filter Spin-on Air/Oil Separator Element 500 Litre, 1400 kPa Air Receiver (to AS-1210)
-
Unit 36, 17 Lorraine St, Peakhurst, NSW, 2210
www.nationalaircompressors.com.au
Ph (02) 9534 5522 Fax (02) 9534 5426
With many Customer Benefits
66-68
ES99 Electronic Control System
Electronic Adjustment
The ES 99 electronic controller & display has the following user friendly functionality of the machine:
All Commands (run, stop, reset).
All Controls (power on, compressor started, compressor with load).
All alarms (motor thermal alarm, high temperature).
Energy Savings
The compressor management of the electronic controller, aims at reducing the electric energy consumption. It is able to distinguish two types of air consumption:
High Consumption (idle time < 4 min): The electronic controller cycles the compressor on-load (compressing) & off-load (free wheeling), thus avoiding stopping & restarting the electric motor.
Low Consumption (idle time > 4 min): When maximum pressure is reached, the compressor runs off-load for 30 seconds & then switches to stand-by mode (turns off), avoiding running the motor when it is not needed.
Silent Running
Noise is no longer a problem. With the CSM Maxi compressor cabinet designed around maximum sound absorption whilst maintaining maximum cooling airflow, sound levels of around 67 dB(A) are achieved.
This eliminates OH&S noise issues associated with piston & older screw compressors, allowing the units to be installed close to working areas & offices.
-
Unit 36, 17 Lorraine St, Peakhurst, NSW, 2210
www.nationalaircompressors.com.au
Ph (02) 9534 5522 Fax (02) 9534 5426
Easy Maintenance
Fast, simple & cost effective maintenance is facilitated via:
Oil Level permanently visible from the outside.
Long intervals between scheduled servicing.
Easy access to all internal components (three panels facilitates access to all compressor components).
Spin-On style Oil Filters & Air/Oil Separator Elements (just like a car oil filter).
The result is that In-House Scheduled Maintenance is now an option, which is of particular benefit to regional customers.
Easy Maintenance
In-House Scheduled Maintenance
In House scheduled maintenance can be done without effecting warranties. Two pre-packaged D.I.Y. Service Kits are available & all models come with a detailed Owners Manual giving full instructions.
Minor Service Kit: Oil, Air Filter & Oil Filter 12 months or 2,000 hrs (depending on environmental conditions)
Major Service Kit: Minor Kit + Air/Oil Separator Element 24 months or 4,000 hrs (depending on environmental conditions)
Final Filter Kit: Final Filter Replacement Element. (depending on environmental conditions)
-
Unit 36, 17 Lorraine St, Peakhurst, NSW, 2210
www.nationalaircompressors.com.au
Ph (02) 9534 5522 Fax (02) 9534 5426
CSM Maxi Specifications
MODEL CSM 10 X - 500 CSM 15 X - 500
Free Air Delivery 0.92 m/min (32.5 cfm) 1.31 m/min (46.3 cfm)
Motor Power 7.5 kW (10 hp) 11 kW (15 hp)
Max Pressure 1000 kPa (145 psi) 1000 kPa (145 psi)
Cut In Pressure 850 kPa (125 psi) 850 kPa (125 psi)
Sound Level 66 dB(A) 68 dB(A)
Dimensions (L x W x H) 1935 x 629 x 1463 mm 1935 x 629 x 1463 mm
Weight 292 Kg 305 Kg
Current Draw, Onload 16 amps 23 amps
On-site Circuit Breaker Reqd 25 amp D-Curve 35 amp D-Curve
Warranty : 12 months unlimited hours, extended to 2 years on airend.
FAD : Free Air Delivery to ISO 1217 & CAGI Pneurop Standard.
Prices & Specifications : As of Sep-11, subject to change without notice.
CSM Mini Range is also available!
With both Air Centre &
Dry Air Centre configurations!
Free Air Delivery 21.2 cfm
Motor Power 7.5 hp
Air Receiver 200 Litre
The Ceccato company has its headquarters and factory in Vicenza Italy & satellite production facilities through western Europe. They have more than 65 years experience in compressed air technology
& 35 years in the manufacturing of rotary screw compressors. Today Ceccato is part of the Atlas Copco Group of Companies, distributing their products worldwide through more than 1000 distributors.
Today Ceccatos rotary screw compressors utilize the Airtec air end (one of the largest air end manufacturers in the world). In Australia, Ceccatos head office is in Melbourne, with distribution nationally, through state based distributors, such as National Air Compressors.
All products are designed & manufactured by Ceccato in accordance with ISO-9001 & ISO-14001 certification & all models conform to the rigorous ISO-1217, Ed.3, Annex C-1996 acceptance test code.
