CE-638 Geosynthetics and Reinforced Soil Structures
Transcript of CE-638 Geosynthetics and Reinforced Soil Structures
![Page 1: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/1.jpg)
CE-638Geosynthetics and Reinforced Soil Structures
Mid-Semester Exam = 25 Marks
Home Assignment + Attendance + Surprise Tests + etc = 15 Marks
1
![Page 2: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/2.jpg)
PROPERTIES OF GEOSYNTHETICS
2
![Page 3: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/3.jpg)
PROPERTIES OF GEOSYNTHETICS
Necessity
1. To determine the suitability of a material for specific application.
2. To control the quality of a product during production and use.
3. To verify the claimed characteristics by the manufacturer.
Pre-requisite
Before testing, the specimen is kept under controlled environment
for a specified period of time. This activity is called conditioning.
Temperature (27°C ± 2°C)
Humidity (50% ± 5%)
3
![Page 4: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/4.jpg)
CLASSIFICATION OF PROPERTIES
1. Physical Properties – properties describing the material itself
2. Mechanical Properties – properties describing strength parameters
3. Hydraulic Properties – properties describing flow of water through GS
4. Endurance Properties – properties describing durability
5. Degradation Properties – properties describing degradation process
4
![Page 5: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/5.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
(i) Specific gravity
(ii) Mass per unit area (weight)
(iii) Thickness
(iv) Stiffness
5
![Page 6: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/6.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
SPECIFIC GRAVITY
The ratio of the weight of a given volume of material (without any voids)
to the weight of an equal volume of distilled de-aired water at 27°C
Importance
Helps in identifying the base polymer (PP, PE, PET, PVC etc.)
Helps in calculating strength – weight and cost – weight ratios.
Plastics are available in the form of sheets, rods, tubes, molded items.
6
![Page 7: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/7.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
DENSITY BOTTLE METHODOR
PYCNOMETER METHOD
7
When plastics are available in the form of crystals
W1 = Weight of empty bottle
W2 = Weight of bottle + geosynthetic material
W3 = Weight of bottle + geosynthetic material + water
W4 = Weight of bottle + water
![Page 8: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/8.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
8
When plastics are available in the form sheets, rods, tubes etc
![Page 9: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/9.jpg)
Material Polypropylene (PP)
Polyethylene (PE)
Polyester (PET)
Polyvinyl Chloride(PVC)
SpecificGravity 0.90 – 0.91 0.91 – 0.96 1.22 – 1.38 1.3 – 1.5
9
SPESIFIC GRAVITY OF COMMONLY USED POLYMERS
![Page 10: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/10.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
MASS PER UNIT AREA (WEIGHT)
Mass per unit area is the proper term for the weight of the geotextile.
It is usually given in units of gram per square meter (g/m2).
It is determined by weighing square test specimens(100mm×100mm)
Specimens are cut from various locations over the full width of the
laboratory sample.
Dimensions are measured without any tension in the specimen.
Normally the specimen is placed on the table during measurements.
The calculated values are then averaged to obtain the mean mass per
unit area of the laboratory sample. 10
![Page 11: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/11.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
MASS PER UNIT AREA (WEIGHT)
The results should be accurate to 0.01 g/m2.
The number of test specimens shall be a 5 – 10
The total geotextile sample should be the representative of the entire
roll width and a length such that the combined total minimum area
must not be less than 100000 mm2.
Each test specimen shall be equal in area not less than 10000 mm2.
Importance
Cost and mechanical properties such as tensile strength, tear strength,
puncture strength, etc., are directly related to mass per unit area. 11
![Page 12: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/12.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
THICKNESS
The thickness of a geosynthetic is the vertical distance between its
upper and lower surfaces.
A compressive pressure of 2 kPa is applied at the time of thickness
measurement.
It is measured by using a thickness-testing instrument to an accuracy
of at least 0.01 mm.
12
![Page 13: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/13.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
THICKNESS
13
![Page 14: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/14.jpg)
PHYSICAL PROPERTIES OF GEOTEXTILES
STIFFNESS
It is the ability to resist flexure under its own weight.
Measured by making a cantilever with fixed deflection.
Half of the length is bending length.
Stiffness = cube of bending length × weight per unit area
Automatic Method
41.5°l
14
![Page 15: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/15.jpg)
MECHANICAL PROPERTIES OF GEOTEXTILES
15
![Page 16: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/16.jpg)
MECHANICAL PROPERTIES OF GEOTEXTILES
Compressibility
Tensile Strength
Fatigue Strength
Burst Strength
Tear Strength
Impact Tests
Puncture Tests
Friction Behaviour
Pullout (Anchorage) Tests
16
![Page 17: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/17.jpg)
MECHANICAL PROPERTIES OF GEOTEXTILES
COMPRESSIBILITY
Rate of decrease of thickness due to increased normal stresses.
Determined by observing the change in thickness of geotextile at
varying applied normal stresses.
Woven and nonwoven heat bonded geotextiles have very low
compressibility
Little direct consequence as far as design is concerned.
Nonwoven needle punched geotextiles have more compressibility.
It will affect transmissivity adversely because nonwoven needle
punched geotextiles are used for conveying water. 17
![Page 18: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/18.jpg)
COMPRESSIBILITY OF DIFFERENT TYPES OF GEOTEXTILES 18
1
2
34
5
5
Applied Stress (kPa)
![Page 19: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/19.jpg)
12345
1
2
3
45
19
![Page 20: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/20.jpg)
MECHANICAL PROPERTIES OF GEOTEXTILES
TENSILE STRENGTHMost important property because tensile
strength is needed for all the functions e.g.
reinforcement, separation, filtration, drainage.
Maximum tensile stress at the time of failure.
kN/mm2 (not used) irregular thickness
kN/m (used) maximum load per unit length
Determined by wide strip tensile test
20
![Page 21: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/21.jpg)
21
WOVEN
NON-WOVEN
SAMPLE RESULTS OF TENSILE TESTS
![Page 22: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/22.jpg)
10
30
20
40
50 100Strain (%)
Tens
ile S
tress
(kN/
m)
A
B
C
D
E
A Woven monofilamentB Woven slit-film monofilamentC Woven multifilamentD Nonwoven heat bondedE Nonwoven needle punched
To 60 kN/m at 30% strain
00
22
![Page 23: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/23.jpg)
TYPES OF TENSILE TESTS
Wide-strip tensile test
Narrow strip tensile test
Grab tensile test
Very wide strip tensile test
Depending upon nature of test specimen
23
![Page 24: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/24.jpg)
The test provides following four parameters:
1. Maximum tensile stress (referred to as the geotextile’s strength)
2. Strain at failure (generally referred to as maximum elongation or
simply elongation
3.Toughness (absorbed energy, work done per unit volume before
failure, usually taken as the area under the stress-strain curve)
4. Modulus of elasticity (which is the slope of the initial portion of the
stress-strain curve)
TENSILE STRENGTH
Parameters obtained by stress-strain curve
24
![Page 25: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/25.jpg)
ELASTIC MODULUS
10
30
20
40
50 100Strain (%)
Tens
ile S
tress
(kN/
m)
A
B
C
D
E
A Woven monofilamentB Woven slit-film monofilamentC Woven multifilamentD Nonwoven heat bondedE Nonwoven needle punched
To 60 kN/m at 30% strain
00
INITIAL TANGENT MODULUSOFFSET TANGENT MODULUSSECANT TANGENT MODULUS
25
![Page 26: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/26.jpg)
ELASTIC MODULUSTe
nsile
Stre
ss k
N/m
Stress Strain Curve
Strain %
InitialTangentModulus
Stress Strain Curve
OffsetModulus
Offset Strain %
Tens
ile S
tress
kN
/m
Tens
ile S
tress
kN
/m
SecantModulus
Stress Strain Curve
Desired Strain
Strain %
INITIAL TANGENT MODULUS OFFSET TANGENT MODULUS SECANT TANGENT MODULUS
26
![Page 27: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/27.jpg)
FACTORS AFFECTING LAB RESULTS
Specimen widthTemperatureMass per unit area
Aspect ratio (B/L) = 2
27
![Page 28: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/28.jpg)
FACTORS AFFECTING LAB RESULTS
Specimen widthTemperatureMass per unit area
28
![Page 29: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/29.jpg)
FACTORS AFFECTING LAB RESULTS
Specimen widthTemperatureMass per unit area
29
![Page 30: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/30.jpg)
CONFINING TENSILE STRENGTH
The geosynthetics in field are not provided in isolation.
They are subjected to some confining pressure.
Confining pressure interlocks of soil particles with the geosynthetic
structure and may increase the frictional force.
It may have a significant effect on the stress–strain properties.
The confined modulus may be more than the isolation modulus.
McGown et al. (1982) developed the mechanism for holding the
geotextile specimen for confined tensile strength.
It is a boxlike part in which specimen is sandwiched between
lubricated membrane and sand layer under lateral pressure.30
![Page 31: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/31.jpg)
31
![Page 32: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/32.jpg)
Fahmy et al. (1993)
32
![Page 33: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/33.jpg)
33
![Page 34: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/34.jpg)
Fahmy et al. (1993) conducted tests on woven and nonwovengeotextile under confining pressures of 0, 35 , 70 and 140 kPa.
It was found that only the nonwoven needle punched geotextileshows significantly improved stress-strain behavior underconfinement and the improvement was proportional to theconfining pressure.
The possible reason for increased performance may be that theconfining pressure holds the randomly oriented fibers in theiroriginal positions.
Thus, the low initial modulus response seen in Figure 2(a) [curveE] is eliminated.
For the other geotextiles tested under confining pressure thevariation in results is not considerable but almost the same.
Therefore, confined tensile testing is not carried out on a routinebasis. 34
![Page 35: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/35.jpg)
SEAM STRENGTH
35
![Page 36: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/36.jpg)
FATIGUE STRENGTH
36
Field Conditions
Wave loading on offshore structures
Seismic loading
Rail/road loading
What is the similarity among all these loads?
All are of repeated nature.
Strength of geotextile will reduce after each load application.
Fatigue strength may be defined as the ability of a geotextile to
withstand repetitive loading before undergoing failure.
![Page 37: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/37.jpg)
37
Fatigue strength is determined through conducting wide strip tensile
test by applying a predetermined load (less than the failure load) and
then reducing it to zero.
The load is again applied and then relaxed.
This cycling is repeated till failure takes place.
The resulting cyclic stress – strain response is used to calculate the
cyclic modulus.
As expected, lower the stress level, the larger the number of cycles
required before failure.
FATIGUE STRENGTH
![Page 38: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/38.jpg)
TEAR STRENGTH
Tear
(split, scratch, damage, injury, cut)
Tear may present in the supplied geotextile
Tear may take place during construction (transporting, handling, placing)
The cut propagates when subjected to tension.
TEAR STRENGTH
The ability of geotextile to resist the stresses causing propagation of tear.
38
![Page 39: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/39.jpg)
39
TRAPEZOIDAL TEAR TEST (ASTM D4533)
Machine : as used in case of grab test
Specimen size: 200 mm × 76 mm
A trapezoidal section is drawn as follows:
Strain rate 300 mm per minute
TEAR STRENGTH
39
![Page 40: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/40.jpg)
TEAR STRENGTH
40
![Page 41: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/41.jpg)
IMPACT RESISTANCE
The ability of a geosynthetic to withstand stresses generated by the
sudden impact of falling objects such as coarse aggregates, tools,
and other construction items during installation process.
Impact strength/dynamic puncture strength/dynamic perforation
strength
CONE DROP TEST METHOD
This test involves the determination of the diameter of the
punctured hole made by dropping a standard brass or stainless steel
cone weighing 1 kg from a specified height onto the surface of a
circular geosynthetic specimen gripped between clamping rings.
41
![Page 42: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/42.jpg)
42
MANNUAL METHOD
MECHANICAL METHOD
Height = 500 mm or
Diameter = 50 mm
![Page 43: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/43.jpg)
IMPACT RESISTANCE
The geosynthetic may be supported by water or soil to simulate the
field conditions.
The diameter of the punctured hole, measured using a penetration
measuring cone, in combination with the drop height, gives a
measure of impact resistance.
The smaller the diameter of the hole, the greater the impact
resistance of the geosynthetic to damage during installation.
The impact resistance (strength) can be expressed as either the
diameter of the hole at a standard drop height of 500 mm or drop
height that will produce a hole of diameter 50 mm.
43
![Page 44: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/44.jpg)
PUNCTURE RESISTANCE
44
![Page 45: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/45.jpg)
PUNCTURING
BURSTING
SOURCES OF PUNCTURING
FALLEN POINTED STONES ETC IMPACT RESISTANCE
STATICALLY LOADED POINTED STONES ETC PUNCTURE RESISTANCE
45
![Page 46: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/46.jpg)
PUNCTURE RESISTANCE
1 2Bursting Puncturing
Fine-grained soilPressure
Stone bed
46
![Page 47: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/47.jpg)
47
PUNCTURE RESISTANCE
47
![Page 48: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/48.jpg)
Cone penetration test – dynamic loading – impact resistance
Damage of geotextiles due to objects such as stones, ballast, etc.
under static condition.
Thus, the puncture strength is the ability of geotextile to withstand
the localized stresses generated by penetrating or puncturing objects
e.g. aggregate etc.
PUNCTURE RESISTANCE
Dia. of steel rod = 8 mm
Dia. Of empty cylinder = 45 mm
Depth of cylinder = 100 mm
Strain rate = 50 mm per minute
PUNCTURETEST
48
![Page 49: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/49.jpg)
49
Large size, CBR apparatus gives more satisfactory results.
Rod dia. = 50 mm (beveled at 45° for 2.5 mm radius)
Mould diameter = 150 mm
Strain rate = 50 mm per minute
Puncture strength in force units.
PUNCTURE RESISTANCE
49
![Page 50: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/50.jpg)
RELATION BETWEENCBR PUNCTURE RESISTANCE (Fp)
ANDWIDE WIDTH TENSILE STRENGTH (Tf)
Cazzuffi and Venesia (1986)
Tf = tensile force per unit width (kN/m)
Fp = puncture/breaking force (kN)
r = radius of the puncturing rod (m)50
![Page 51: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/51.jpg)
BURSTING STRENGTHIt is multi-axial tensile test.
Specimen is clamped with sufficient rubber membrane below it.
Air pressure is applied till failure (bursting).
Air pressure at failure is called bursting strength.
This test is more important in case of geomembranes.
51
![Page 52: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/52.jpg)
SOIL-GEOSYNTHETIC INTERFACE CHARACTERISTICS
52SHEAR TEST
![Page 53: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/53.jpg)
53
GeosyntheticReinforcement
Steep Slope
Stable Foundation Soil
SHEAR TEST
![Page 54: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/54.jpg)
54
![Page 55: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/55.jpg)
Soil
Soil
Soil
Soil
55
PULLOUT RESISTANCE
![Page 56: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/56.jpg)
56
PULLOUT RESISTANCE
where, Le = embedment length of the test specimen; W = width of the test specimen;ef = effective normal stress at the soil–test specimen interfaces;Ci = coefficient of interaction (a scale effect correction factor)depending on the geosynthetic type, soil type and normal load applied;F = pullout resistance (or friction bearing interaction) factor.
Since this test is similar toshear test, hence double ofshear resistance obtainedby shear test is taken asPullout resistance.
56
For preliminary design or in the absence of specific geosynthetic testdata, F may be conservatively taken as F = (2/3) tan ϕ for geotextilesand F = 0.8 tan ϕ for geogrids.
![Page 57: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/57.jpg)
INFLUENCE OF SPECIMEN EMBEDMENT LENGTH
57
![Page 58: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/58.jpg)
INFLUENCE OF NORMAL STRESS
58
![Page 59: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/59.jpg)
HYDRAULIC PROPERTIES
POROSITY
PERCENT OPEN AREA
APPARENT OPENING SIZE
PERMEABILITY
FILTERATION
FIELD APPLICATIONS
DRAINAGE
59
![Page 60: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/60.jpg)
60
POROSITY
n = Porositym = Mass per unit areaρ = Density of polymert = Thickness of geotextile
For a given geotextile’s weight anddensity, the porosity is directlyrelated to thickness. Thickness inturn is related to the applied normalstress.
![Page 61: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/61.jpg)
PERCENT OPEN AREA
This property is applicable only for woven geotextiles, and even then
only for woven monofilament geotextiles.
Higher POA indicates more number of openings per unit area.
For filter applications of a geotextiles, its POA should be higher.
Higher POA avoids clogging throughout the design life of a filter.
61
![Page 62: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/62.jpg)
Project a light through the geotextile onto a large poster sized piece
of a cardboard background that is crosshatched like graph paper.
Squares are counted and summed up for the open area.
Measure total area (yarns plus voids) on cardboard.
This test is not applicable to nonwovens, since the overlapping
yarns block any light from passing directly through the geotextile.
MEASUREMENT OF PERCENT OPEN AREA
62
Cardboard
![Page 63: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/63.jpg)
Sometimes pore spaces are measured by Image
analysis, a technique used for the direct
measurement of pore spaces within a cross-
sectional plane of the geotextile with the help of
a microscope.
IMAGE ANALYSER (MICROSCOPE)
63
![Page 64: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/64.jpg)
APPARENT OPENING SIZE OR
EQUIVALENT OPENING SIZE
Pores in a geotextile are not of one size but are of a range of sizes.
Pore size distribution is to be determined.
Pore size distribution of a geotextile is represented similar to the
particle size distribution for a soil.
The geotextile is used as a sieve, of unknown sizes, and the
particles (glass beads) of different known sizes are passed through
the geotextile as a sieve.
64
![Page 65: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/65.jpg)
65
The pore size (or opening size), at which 95% of the pores in the
geotextile are finer, termed the equivalent opening size (EOS)
designated as O95.
EQUIVALENT OPENIG SIZE
DRY SIEVING
Filed condition
WET SIEVING
Continuous spray of waterImmersion of bucket with bottom gtx
![Page 66: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/66.jpg)
66
95% of geotextile pores are 300 µm or smaller.
95% of particles with a diameter of 300µm are retained on the
geotextile during sieving.
5% of particles with a diameter of 300µm are passed through the
geotextile during sieving.
If a geotextile has an O95 value of 300µm, it means ………………..
![Page 67: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/67.jpg)
67
AOS or EOS is, in fact, considered as the property that indicates the
approximately largest particle that would effectively pass through
the geo-textile and thus reflects the approximately largest opening
dimension available in the geotextile for soil to pass through.
IMPORTANT
DRY SIEVING
Filed condition
WET SIEVING
Continuous spray of waterImmersion of bucket with bottom gtx
![Page 68: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/68.jpg)
68
PERMEABILITYThe ability of geosynthetic to transmit a fluid.
Water flow direction
Geosynthetic strip
Geosynthetic strip
Water flow direction
Permeability across the plane of geotextile
Permeability along the plane of geotextile
(Permittivity)
(Transmissivity)
![Page 69: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/69.jpg)
69
PERMITTIVITY (ψ)Water flow direction
Geosynthetic strip
Geotextiles deform under applied loads (overburden).
Permeability across the plane of geotextile (Permittivity) willdepend upon the thickness of the geotextile.
Permittivity is defined as the coefficient of permeability for waterflow normal to its plane divided by its thickness.
This is quite useful in filter applications.
ψ = permittivity (sec-1)
kn = permeability normal to the geotextile (m/sec)
t = thickness of the geotextile (m)
![Page 70: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/70.jpg)
70
q = flow rate (m3/sec)
i = hydraulic gradient (dimensionless)
Δh = total head loss (m)
A = total area of specimen (m2)
CONSTANT HEAD
70
FALLING HEAD
![Page 71: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/71.jpg)
Flow
rate
(q) m
3 /sec
(Δh × A) (m3)
Permittivity (ψ)
71
![Page 72: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/72.jpg)
72
When the flowing fluid is not water (leachate or waste oil) then
ρf
ρw
Permittivity of the fluid under consideration
= Permittivity using water
= Density of the fluid
= Density of water
= Viscosity of the fluid
= Viscosity of water
![Page 73: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/73.jpg)
73
TRANSMISSIVITY (θ)
Geosynthetic strip
Water flow direction
Similar to permittivity
Geotextiles deform under applied loads (overburden).
Permeability along the plane of geotextile (Transmissivity) willdepend upon the thickness of the geotextile.
Transmissivity is defined as the product of coefficient ofpermeability for water flow along its plane and its thickness.
This is quite useful in drainage applications.
θ = transmissivity (m2/sec)
kp = permeability along the geotextile (m/sec)
t = thickness of the geotextile (m)
![Page 74: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/74.jpg)
74
θ = transmissivity of geotextile (m2/sec)q = flow rate (m3/sec)B = width of the geotextile test specimen (m)Δh = total head loss (m)L = length of the geotextile (m)
TRANSMISSIVITY (θ)
![Page 75: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/75.jpg)
75
RADIAL TRANSMISSIVITY (θ)
where
q = flow rate of liquid (m3/sec)
r2 = outer radius of the geotextile test specimen (m)
r1 = inner radius of the geotextile test specimen (m)
Δh = head loss between r1 and r2 (m)
![Page 76: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/76.jpg)
76
DURABILITY
Ability to maintain requisite properties against environmental or
other influences over the selected design life.
Assessed on the basis of mechanical property test results.
Assessed in terms of percentage retained tensile strength (RT)
and/or percentage retained strain (Rε).
Te = Mean tensile strength of the exposed geosynthetic specimen.
Tu = Mean tensile strength of the unexposed geosynthetic specimen.
εe = Mean strain at max. load of the exposed geosynthetic specimen.
εu = Mean strain at max. load of the unexposed geosynthetic specimen.
Temperature Degradation, Oxidation Degrad, Hydrolytic Degrad,Chemical Degrad, Mechanical Degrad, Biological Degrad,Radioactive Degrad, Sunlight (Ultraviolet) Degrad.
76
![Page 77: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/77.jpg)
ABRASIONWearing away of any part of a geotextile by rubbing it against astationary abradant.
ABRASION RESISTANCEThe ability of a geosynthetic to resist wear due to rubbing is calledabrasion resistance.
FIELD CONDITIONSGeosynthetics used under pavements, railway tracks or in coastalerosion protection are subject to dynamic loading, which will lead tomechanical damage (abrasion).
77
Resistance to abrasion is expressed as the percentage loss of tensilestrength or weight of the test specimen as a result of abrasion.
MEASUREMENT OF ABRASION
![Page 78: CE-638 Geosynthetics and Reinforced Soil Structures](https://reader034.fdocuments.in/reader034/viewer/2022052521/628c86ce7671f91cfe736d38/html5/thumbnails/78.jpg)
78
ULTRAVIOLET RESISTANCE
Sunlight is an important cause of degradation of the polymers from
which geosynthetics are made.
Spectrum of Sunlight
Infrared, with wavelengths longer than 760 nm
Visible, with wavelengths between 760 and 400 nm
Ultraviolet, with wavelengths shorter than 400 nm
The ultraviolet (UV) region is further subdivided into the following:
UV-A (400 to 315 nm), which causes some polymer damage;
UV-B (315 to 280 nm), which causes severe polymer damage;
UV-C (280 to 100 nm), which is only found in outer space.