CD-7810(a) Ultrasonic Cleaner
-
Upload
olga-bordian -
Category
Documents
-
view
293 -
download
0
Transcript of CD-7810(a) Ultrasonic Cleaner
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
1/12
UltrasonicJewellery Cleaner
N13275
Model number: CD-7810(A)
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
2/12
After Sales Support TEL: 1300 886 649
1
IMPORTANT SAFETY INSTRUCTIONS
Store this instruction manual in a safe place, along with your warranty card,
purchase receipt and packaging for future reference. Please pay particularattention to the safety information.
This appliance is not intended for use by young children or inrm persons
unless they have been adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the
appliance.
Use this appliance as intended and described in the instruction manual only.
Always unplug the appliance immediately after use.
This appliance should never be left unattended when plugged in.
Do not wrap the cord around the appliance.
If the appliance stops unexpectedly, switch off the power supply, and unplug
from the wall socket. Contact the manufacturer or an authorized service
representative.
Switch off the power supply and unplug from the wall when not in use, before
cleaning and or changing accessories.
Keep the appliance and cable away from sources of heat, sharp objects oranything that may cause damage.
Do not operate this appliance if the cable or plug is damaged. Contact the
manufacturer or an authorized service representative.
Electrical appliances must always be stored in a secure place and out of reach
from children.
Always ensure that your hands are dry before operating or adjusting any
switches on the product or touching the plug and main power connection.
Do not leave the appliance unattended when connected to the main power
supply.
Do not use outdoors. This appliance has been designed for domestic indoor use
only.
Only use the power adapter that has been supplied by the manufacturer.
To avoid the risk of electric shock, do not disassemble or attempt to repair the
unit.
Do not overload electrical outlet. Use only the power adaptor provided.
Do not leave packaging components (plastic bags, cardboard, polystyrene, etc.)
within the reach of children, as it could be dangerous.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
3/12
After Sales Support TEL: 1300 886 649
2
This appliance is not intended for used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Items that are easely to be discoloured are not recommended for ultrasonic
cleaning. For example: textiles, leather products, wood ware, etc.
Do not put mobile phone or watch which is not waterproof into the tank
for cleaning.
Do not put any spectacle frame or art-ware which is made from shellinto the tank for cleaning.
Dont use the product if there isnt water in the cleaning tank.
Never drop or insert any object into any opening or hose.
Never block the air openings of the unit or place it on a soft surface, such as a
bed or couch, where the air openings may be blocked. Keep the air openings
free of lint, hair, etc...
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will t in a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the plug, If it still does not t, contact a
qualied electrician.
NOTE: Always consult your jewellery manufacturer for recommended
cleaning agent prior to using the beauty care ultrasonic cleaner.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
4/12
After Sales Support TEL: 1300 886 649
3
How does ULTRASONIC TECHNOLOGY
& DIRT ELIMINATION work.
Many tiny bubbles are generated under
the ultrasonic feature
Bubbles are constantly active underneath the
ultrasonic surface
The impact splits up the dirt into many granules
and separates them from the surface of the item,
the granules then fall into the water.
APPLICATION:
CDs, VCDs, DVDs, rings, necklaces, earrings, watches, dentures, glasses, razor
blades, metal dish-ware, toothbrushes, pen and printer heads, small metal
parts, ancient coins, etc.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
5/12
After Sales Support TEL: 1300 886 649
4
GETTING TO KNOW YOUR ULTRASONIC JEWELLERY CLEANER
1. Lid
2. Digital timer display
3. Stainless steel tank
4. Indication light
5. ON button
6. OFF button
7. Jewellery basket
8. Watch & bracelet holder
9. Plug and cord
10. Housing
11. CD, VCD AND DVD holder
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
6/12
After Sales Support TEL: 1300 886 649
5
Plug the appliance into the main power supply and
place on a at surface. Make sure the appliance
is turned off.
Open the display lid and ll the stainless steel
tank with water.
WARNING: Running without water may damage the unit!
Place the desired item into the Jewellery Basket.
Once the item has been placed in the cleaning utility,
place in the utility into the cleaning tank. Do not exceed
the MAX- water marker.
Close the lid rmly.
The unit has 5 working cycles. When rst turned on the
180 second cycle is displayed on the screen as default.
Press the SET button to change between the 5 working
cycles accordingly: 180s - 280s - 380s - 480s - 90s.
You can choose the working cycle freely according to
the quantity and situation of the item you wish to clean.
OPERATING YOUR JEWELLERY CLEANER
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
7/12
After Sales Support TEL: 1300 886 649
6
Press the ON button to start the cleaning process. The
red indication light should display. The time left will
be displayed on the screen. During cleaning cycle, a
buzzing noise will disperse from the appliance, this
indicates the unit is working correctly.
Once the appliance has nished the selected setting, 000
will display. This means the cleaning cycle has nished
and the appliance will stop automatically. The red
indicator light will turn off also. If another cleaning cycle is
required, repeat the above process.
At anytime during the cleaning process you want to stop
the cycle, press theOFF button. Press theON button
again and the unit will recommence in the current cycle.
To begin a new cleaning cycle simply press the SET
button to renew working cycle.
When cleaning is nished, unplug the unit, open the lid
and take out the item. Lastly, pour the water from the
stainless steel tank and dry the unit.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
8/12
After Sales Support TEL: 1300 886 649
7
USING YOUR ACCESSORIES
Jewellery basket
Place your jewellery items that require
cleaning into the Jewellery basket
provided, then gently place the basket
into the cleaning tank.
NOTE:The Jewellery Basket is to only be used for cleaning small items (e.g.
rings, bracelets etc), as the Ultrasonic feature absorbs approximately
30% of the ultrasonic energy, and reduces the cleaning result.
In this case, when using the plastic basket, please refer to the
instruction for enhanced cleaning in this manual.
NOTE: Always consult your jewellery manufacturer for recommended
cleaning agent prior to using the beauty care ultrasonic cleaner.
WATCH HOLDER
As the Ultrasonic frequency is strong, it is
recommended that the appliance is only
used to clean watches that have a water
resistance level of up to 30 metres. Should
your watch have a water resistance levelbelow 30 metres, it is recommended that
you use the watch stand to clean the
watchband only by immersing the band in
water while keeping the watch face clear of water all together.
The Ultrasonic feature absorbs approximately 30% of the ultrasonic
energy, and reduces the cleaning result. In this case, when using the
watch stand, please refer to the instruction for enhanced cleaning
in this manual.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
9/12
After Sales Support TEL: 1300 886 649
8
CLEANING YOUR CDs, VCDs AND DVDs
When using a cloth to clean a dirty disk, it may scratch the surface. The
ultrasonic technology can clean off the dirt effectively (within 2 minutes),
and the disk can be protected from scratching.
1. Place the disk (CD, VCD or DVD) onto the disk
holder (as shown in the picture).
NOTE: A limit of 2 x disks can be cleaned at once.
2. Place the disk holder into the cleaning tank,
which should be lled with water, and select
your desired setting.
NOTE: Cleaning time should not exceed 3 minutes.
3. Dry the disk with dry soft cloth.
CAUTION:
Do not use either warm or hot water, as any printed text that appears
on the surface will either fade or rub-off.
You are able to clean the disk as often as required, however, for theprinted text to remain in reasonable quality, it is recommended that
the disk is NOT cleaned two consecutive times. As a general rule, a 90
second cycle is an approximate.
The Ultrasonic feature can only clean dirty surfaces and should not be used
if the disc is severely scratched or damaged.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
10/12
After Sales Support TEL: 1300 886 649
9
CLEANING AND STORAGE
1. Allow the unit to cool before cleaning.
2. Gently wipe over the appliance exterior with a clean, damp cloth,
making sure you do not use abrasive or chemical based cleaning agents.
The appliance is NOT to be submerged in liquid under any circumstances.
Standard cleaning
Use tap water ONLY for the standard cleaning process. The
water tank should be lled to the indicated line ensuring that
once the Jewellery Basket, the CD, VCD & DVD holder or the
Watch Stand are placed inside the appliance, the water does
not exceed the maximum water level line, or spill out of the
appliance.
Enhanced cleaning
When the desired item (Jewellery etc) is smudged or has
excess dirt, place between 5-10ml of a mild liquid cleaning
agent (without salt) and mix it with the water in the appliance.
Cleaning by parts
For large items, please place them in the basket.
NOTE: Always consult your jewellery manufacturer for recommended
cleaning agent prior to using the beauty care ultrasonic cleaner.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
11/12
After Sales Support TEL: 1300 886 649
10
Extensive cleaning
When item to be cleaned needs extensive cleaning or
sterilizing, use theEnhanced Cleaning method rst Then
replace with clean water and add about 5-10 ml of liquid
soap(used for washing hands) into the tank, and start the unit
with the working cycle as 90 seconds.
NOTE: Always consult your jewellery manufacturer for
recommended cleaning agent prior to using the
beauty care ultrasonic cleaner.
-
7/27/2019 CD-7810(a) Ultrasonic Cleaner
12/12
After Sales Support TEL: 1300 886 649
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
Unit 7/15 Rodborough Rd, Frenchs Forest, Australia NSW 2086
Telephone: (02) 9975 2199 Fax: (02) 9975 2688
Email: [email protected]