CCNA2 Chapter 1 v1
-
Upload
imterabyte2291 -
Category
Documents
-
view
221 -
download
0
Transcript of CCNA2 Chapter 1 v1
-
8/14/2019 CCNA2 Chapter 1 v1
1/5
http://testccna-4u.blogspot.com http://allsoft247.blogspot.com
All software you need and all answer test CCNA v4 with 100%
1. Which two things can be determined by using the ping command? (Choose two.)
the number of routers between the source and destination device
the IP address of the router nearest the destination device
**the average time it takes a packet to reach the destination and for the response to returnto the source**whether or not the destination device is reachable through the network
the average time it takes each router in the path between source and destination torespond
2. What are three main types of high-bandwidth connection options used by
medium- to large-sized businesses? (Choose three.)
DSL
cable modemEthernet
**metro Ethernet**T1
**T3
3. What is the maximum T1 transmission speed?
56 kbps
128 kbps**1.544 Mbps
2.4 Mbps
4. Which of the following start the test of destination reachability?
**echo request issued by source
echo reply issued by sourceecho request issued by destination
echo reply issued by destination
5. Which statement describes a function of a Tier 1 ISP?
**peers with other similarly sized ISPs to form the global Internet backbone
uses the services of Tier 3 ISPs to connect to the global Internet backbonepays Tier 2 ISPs for transit services to connect across continents
limits the offered services to small geographic areas
-
8/14/2019 CCNA2 Chapter 1 v1
2/5
http://testccna-4u.blogspot.com http://allsoft247.blogspot.com
All software you need and all answer test CCNA v4 with 100%
6. At which point do individuals and small businesses connect directly to the ISP
network to obtain Internet access?
**at a POP
at an IXPat a Metro Ethernet linkon the ISP extranet
7.What information is contained in the numbered RFCs maintained by the IETF?
the rules for acceptable use of websites and e-mailthe descriptions of various hardware components that connect to the Internet
**the specifications and rules for how devices communicate over an IP networkthe standards for cabling and wiring for local Ethernet networks
8. Which network support services team is responsible for testing a new customer
connection and for monitoring the ongoing operation of the link?"
customer service
help desk**network operations
on-site installation
9. Which network support services team identifies whether the client site has
existing network hardware and circuits installed?
customer servicehelp desk
network operations**planning and provisioning
10. Which ISP network support systems team will typically contact the customer
once a new circuit is ready and guide the customer in setting up passwords and
other account information?
**help deskcustomer service
network operations centeron-site installation team
planning and provisioning
-
8/14/2019 CCNA2 Chapter 1 v1
3/5
http://testccna-4u.blogspot.com http://allsoft247.blogspot.com
All software you need and all answer test CCNA v4 with 100%
11. What feature allows network devices to be scalable?
a fixed number of interfaces
ease of repair
**modularitylow maintenance requirementslow cost
12. Which command generated this output?
1 12.0.0.2 4 msec 4 msec 4 msec2 23.0.0.3 20 msec 16 msec 16 msec
3 34.0.0.4 16 msec 18 msec 16 msec**Router# traceroute 34.0.0.4
Router# nslookup 34.0.0.4Router# ping 34.0.0.4
Router# telnet 34.0.0.4
13. Which network utility helps determine the location of network problems and
identifies routers that packets travel across?
pingipconfig
**tracerouteixp
14. What interconnects the Internet backbone?
gateway routers**IXPs
POPssatellite dishes
15. What units are used to measure Internet bandwidth?
**bits per secondbytes per second
hertzmegabytes per second
packets per second
-
8/14/2019 CCNA2 Chapter 1 v1
4/5
http://testccna-4u.blogspot.com http://allsoft247.blogspot.com
All software you need and all answer test CCNA v4 with 100%
16. The IT manager of a medium-sized business wishes to house the company-owned
web servers in a facility that offers round-the-clock controlled access, redundant
power, and high-bandwidth Internet access. Which ISP service will fulfill this need?
web hostingplanning and provisioningapplication hosting
**equipment colocationTier 1 ISP services
17. What is the purpose of an RFC?
to provide the connection point for multiple ISPs to the Internet**to document the development and approval of an Internet standard
to connect a business to an ISPto provide data communication services to ISP customers
to monitor network performance and connection status of ISP clients
18. When did the Internet become available for use by businesses and consumers?
1979
1984**1991
19992000
19. What was the original purpose of the Internet?
voice communicationmarketing
**researchcommerce
20. What three support service teams are commonly found within an ISP? (Choose
three.)
**help desk
computer supportapplication readiness
**network operations center**planning and provisioning
implementation and documentation
-
8/14/2019 CCNA2 Chapter 1 v1
5/5
http://testccna-4u.blogspot.com http://allsoft247.blogspot.com
All software you need and all answer test CCNA v4 with 100%