CAUDAL / FLOW
Transcript of CAUDAL / FLOW
CAUDAL / FLOW
Fluidos limpios (b,d) / Clean fluids (b,d)Alta viscosidad (a,c) / High viscosity (a,c)Fluidos sucios (e,f) / Dirty fluids (e,f)
Uso general, dependiendo de placa de orificio / General purpose defined by orifice plate Uso general con tuberías pequeñas /General purpose with small pipes
Alta presión y/o velocidad /High pressure and/or velocity
Tamaño /Size 2” ÷ 40” /según tipos) / 2” ÷ 40” (limited by type)
Precisión aprox. /Approx. accuracy 1 ÷ 2%
2” ÷ 40”
1 ÷ 2% 1 ÷ 2%
2” ÷ 40” 1/2” ÷ 1 1 2”
1% 2%
2” ÷ 24”
Placas de orificio / Orifice plates Bridas de orificio / Orifice flanges Placa con anillos piezométricos /Orifice plate with piezometer rings
Tramo calibrado / Honed meter run Tobera (insertada en tubería) / Nozzle (inserted in pipe)
a.- Cuarto de círculo / Quarter circle. b.- Arista viva / Square edge. c.- Cónica / Cronical.d.- Arista viva (ámbas caras) / Square edge (both sides). e.- Segmental / Segmental. f.- Excéntrica / Excentric
Aplicación /Application
Alta presión y/o velocidad / High pressure and/or velocity
Muy alta presión / Very higt accuracy Pérdida de carga permanente baja / Low permanent pressure loss
Tamaño /Size
2” ÷ 30”
Precisión aprox. /Approx. accuracy
2%
4” ÷ 28”
0,25 (calibrada) / 0,25 (calibrated)
2” ÷ 10”
1% 1,5%
8” ÷ 48”
Tobera (montaje entre bridas) /Nozzle (installation between flanges)
Tobera ASME PTC-6 con restificador de flujo Brida se orificio /ASME PTC-6 Flow nozzle with flow conditioner
Tubo venturi con entrada mecanizada /Venturi tube with a machined convergent section
Tubo venturi de chapa soldada /Venturi tube with a rough-welded
Pérdida de carga permanente baja / Low permanent pressure loss
Aplicación /Application
Reducción de presión o limitación de caudal /Pressure reduction or flow limiting
Reducción de presión con altos diferencialers /High differential pressure reduction
Altas caídas de presión y/o condiciones críticas / High pressure drop and/or critical conditions
Tamaño /Size 1/2” ÷ 40”
Precisión aprox. /Approx. accuracy 2%
1/2” ÷ 24”
5%
Según condiciones de proceso / As per process conditions
2 - 5% -
2” ÷ 40”
Orificio de restricción simple /Simple restriction orifice
Orificio de restricción múltiple CON CARRETE /Multistage restriction orifice
Acondicionador de flujo / Flow conditioner
Elimina o reduce turbulencias / Removes o reduces swirl
Orificio de restricción a salto múltiple / Multistage restriction orifice
Aplicación /Application
1 ÷ 2%
2” ÷ 40”
Placa integrada con tomas /XXXXXXXXXXXXXXXXXXXXX
1,5%
8” ÷ 48”
PITOT /XXXXXXXXXXXXXXXXXXXX
Pérdida de carga permanente baja / Low permanent pressure loss
Alta presión y/o velocidad / High pressure and/or velocity
2” ÷ 30”
2%
Tobera 1932 /xxxxxxxxxxxxxxxxxxxxx
1,5%
8” ÷ 48”
WEDGE NUEVO/Venturi tube with a rough-welded
Pérdida de carga permanente baja / Low permanent pressure loss
Reducción de presión con altos diferencialers /High differential pressure reduction
1/2” ÷ 24”
5%
Orificio de restricción múltiple SIN CARRETE /Multistage restriction orifice
1,5%
8” ÷ 48”
V-CONE /XXXXXXXXXXXXXXXXXXXX
Pérdida de carga permanente baja / Low permanent pressure loss
www.eipsa.es