CATIA V5R19 Course Catalog

CATIA V5R19Course Material Catalog

January 2009 Edition

CATIA V5R19 Course Material Catalog Jan 23, 2009 1/153

CATIA V5R19 Course Material Catalog

CATIA Course Material .......................................................................... 5Analysis Solutions ................................................................................................ 5

EST: ELFINI Structural Analysis (EDU-CAT-E-EST-F - V5R19) ............................................. 6FMD: FEM Solid (EDU-CAT-E-FMD-F - V5R19) ..................................................................... 7FMS: FEM Surface (EDU-CAT-E-FMS-F - V5R19) ................................................................. 9GAS: Generative Assembly Structural Analysis (EDU-CAT-E-GAS-F - V5R19) ................... 11GDY: Generative Dynamic Response Analysis (EDU-CAT-E-GDY-F - V5R19) ................... 13GPE: Generative Part Structural Analysis Expert (EDU-CAT-E-GPE-F - V5R19) ................. 14GPF: Generative Part Structural Analysis Fundamental (EDU-CAT-E-GPF-F - V5R19) ...... 15V5A: CATIA V5 for Analysis (EDU-CAT-E-V5A-F - V5R19) .................................................. 17

Equipment & Systems Engineering Solutions .................................................... 18CBD: Circuit Board Design (EDU-CAT-E-CBD-F - V5R19) ................................................... 19CNA: Compartment & Access (EDU-CAT-E-CNA-F - V5R19) .............................................. 20CNS: Compartment & Access Setup (EDU-CAT-E-CNS-F - V5R19) .................................... 21EHF: Electical Harness Flattening (EDU-CAT-E-EHF-F - V5R19) ........................................ 22ELI: Electrical Librarian & Harness Installation (EDU-CAT-E-ELI-F - V5R19) ....................... 23EQS: Equipment Arrangement Setup & Catalogs (EDU-CAT-E-EQS-F - V5R19) ................ 25EQT: Equipment Arrangement (EDU-CAT-E-EQT-F - V5R19) ............................................. 26ES1: Equipment & Systems Environment (EDU-CAT-E-ES1-F - V5R19) ............................. 27ES2: Generic Routing (EDU-CAT-E-ES2-F - V5R19) ........................................................... 28ESA: Equipment & Systems Setup and Administration (EDU-CAT-E-ESA-F - V5R19) ........ 29EWR: Electrical Wire Routing (EDU-CAT-E-EWR-F - V5R19) .............................................. 30HVA: HVAC Design (EDU-CAT-E-HVA-F - V5R19) .............................................................. 31HVD: HVAC Diagrams (EDU-CAT-E-HVD-F - V5R19) .......................................................... 32HVS: HVAC Setup & Catalogs (EDU-CAT-E-HVS-F - V5R19) ............................................. 33PID: Piping & Instrumentation Diagrams (EDU-CAT-E-PID-F - V5R19) ................................ 34PIP: Piping Design (EDU-CAT-E-PIP-F - V5R19) ................................................................. 36PIS: Piping Setup and Catalogs (EDU-CAT-E-PIS-F - V5R19) ............................................. 38PLO: Plant Layout (EDU-CAT-E-PLO-F - V5R19) ................................................................. 40SDD: Structure Detail Design (EDU-CAT-E-SDD-F - V5R19) ............................................... 41SFD: Structure Functional Design (EDU-CAT-E-SFD-F - V5R19) ........................................ 42SSR: Systems Space Reservation (EDU-CAT-E-SSR-F - V5R19) ....................................... 43STS: Structure Design Setup (EDU-CAT-E-STS-F - V5R19) ................................................ 44TUB: Tubing Design (EDU-CAT-E-TUB-F - V5R19) .............................................................. 46TUD: Tubing Diagrams (EDU-CAT-E-TUD-F - V5R19) ......................................................... 47TUS: Tubing Catalogs (2D Diagrams & 3D Design) (EDU-CAT-E-TUS-A - V5R19) ............. 48V5VE: CATIA V5 Automotive - Electrical (EDU-CAT-E-V5VE-F - V5R19) ............................ 49

Infrastructure Solutions ....................................................................................... 50ADM: V5 Administration (EDU-CAT-E-ADM-F - V5R19) ....................................................... 51COM: Getting Started with CATIA V5 (EDU-CAT-E-COM-F - V5R19) .................................. 52DF1: Product Data Filtering (EDU-CAT-E-DF1-F - V5R19) ................................................... 53


PHS: Photo Studio (EDU-CAT-E-PHS-F - V5R19) ................................................................ 54PRO: CATIA Tools for Proficient Users (EDU-CAT-E-PRO-F - V5R19) ................................ 55PSO: Photo Studio Optimizer (EDU-CAT-E-PSO-F - V5R19) ............................................... 56RTR: Real Time Rendering (EDU-CAT-E-RTR-F - V5R19) .................................................. 57V4A: V4/V5 Advanced Interoperability (EDU-CAT-E-V4A-A - V5R19) .................................. 58V4I: V4 Integration (EDU-CAT-E-V4I-F - V5R19) .................................................................. 59VBA: CATIA V5 Automation (EDU-CAT-E-VBA-F - V5R19) .................................................. 60

Mechanical Design Solutions .............................................................................. 61ASL: Aerospace Sheet Metal Design (EDU-CAT-E-ASL-F - V5R19) .................................... 62ASM: CATIA Product Design (EDU-CAT-E-ASM-F - V5R19) ............................................... 63ASM: CATIA Product Design Expert (EDU-CAT-E-ASM-A - V5R19) .................................... 64CCV: Core & Cavity Design (EDU-CAT-E-CCV-F - V5R19) .................................................. 65CPD: Composites Part Design (EDU-CAT-E-CPD-F - V5R19) ............................................. 66CPE: Composites Part Engineering (EDU-CAT-E-CPE-F - V5R19) ...................................... 69CPM: Composites Part Manufacturing (EDU-CAT-E-CPM-F - V5R19) ................................. 72CTP: CATIA PLM Express Fundamentals (EDU-CAT-E-CTP-F - V5R19) ............................ 74CTPB: CATIA PLM Express Foundations-Basic Surfaces (EDU-CAT-E-CTPB-F - V5R19) . 76CTPS: CATIA PLM Express Foundations-Surfaces (EDU-CAT-E-CTPS-F - V5R19) ........... 78DDR: CATIA Detail Drafting (EDU-CAT-E-DDR-F - V5R19) ................................................. 80DRA: Advanced Drafting & Customization (EDU-CAT-E-DRA-A - V5R19) ........................... 81FMP: Functional Molded Part (EDU-CAT-E-FMP-F - V5R19) ............................................... 82FR1: Part Design Feature Recognition (EDU-CAT-E-FR1-F - V5R19) ................................. 83FTA: 3D Functional Tolerancing & Annotation (EDU-CAT-E-FTA-F - V5R19) ...................... 84GDRA: CATIA Generative Drafting (ANSI) (EDU-CAT-E-GDRA-F - V5R19) ........................ 85GDRI: CATIA Generative Drafting (ISO) (EDU-CAT-E-GDRI-F - V5R19) ............................. 86GS1: CATIA Surface Design (EDU-CAT-E-GS1-F - V5R19) ................................................. 87HA1: Healing Assistant (EDU-CAT-E-HA1-F - V5R19) ......................................................... 88LO1: 2D Layout for 3D Design (EDU-CAT-E-LO1-F - V5R19) .............................................. 89MD2: Mechanical Design V5R19 Update (EDU-CAT-E-MD2-U - V5R19) ............................. 90MTD: Mold Tooling Design (EDU-CAT-E-MTD-F - V5R19) ................................................... 91PDG: CATIA Part Design (EDU-CAT-E-PDG-F - V5R19) ..................................................... 92PDG: CATIA Part Design Expert (EDU-CAT-E-PDG-A - V5R19) ......................................... 93PWT: Engine Design Methodology (EDU-CAT-E-PWT-F - V5R19) ...................................... 94SKE: CATIA Sketcher (EDU-CAT-E-SKE-F - V5R19) ........................................................... 95SMD: Generative Sheetmetal Design (EDU-CAT-E-SMD-F - V5R19) .................................. 96SMD: CATIA Generative Sheet Metal Design V5R19 Update (EDU-CAT-E-SMD-U - V5R19)SR1: Structure Design (EDU-CAT-E-SR1-F - V5R19) .......................................................... 99SRA: Structure Design Administration (EDU-CAT-E-SRA-A - V5R19) ................................ 101TG1: Tooling Design (EDU-CAT-E-TG1-F - V5R19) ........................................................... 102V5E: CATIA V5 Mechanical Design Expert (EDU-CAT-E-V5E-A - V5R19) ........................ 103V5F: CATIA V5 Fundamentals (EDU-CAT-E-V5F-F - V5R19) ............................................ 105V5VB: V5 Automotive - Fundamental Course for Body Designers (EDU-CAT-E-V5VB-F - V5R19)V5VC: V5 Automotive - Fundamental Course for Chassis Designers (EDU-CAT-E-V5VC-F - V5R19)


V5VP: V5 Automotive - Fundamental Course for Powertrain Designers (EDU-CAT-E-V5VP-F - V5R19)WD1: Weld Design (EDU-CAT-E-WD1-F - V5R19) ............................................................. 113

Machining Solutions ......................................................................................... 114AMG: Advanced Part Machining (EDU-CAT-E-AMG-F - V5R19) ........................................ 115LMG: Lathe Machining (EDU-CAT-E-LMG-F - V5R19) ....................................................... 116MLG: Multi-Slide Lathe Machining (EDU-CAT-E-MLG-F - V5R19) ..................................... 117MMG: Multi-Axis Surface Machining (EDU-CAT-E-MMG-F - V5R19) ................................. 118MPA: Prismatic Machining Preparation Assistant (EDU-CAT-E-MPA-F - V5R19) .............. 119MPG: Multi Pocket Machining (EDU-CAT-E-MPG-F - V5R19) ............................................ 120NCI: Numerical Control Infrastructure (EDU-CAT-E-NCI-F - V5R19) .................................. 121PMG: Prismatic Machining (EDU-CAT-E-PMG-F - V5R19) ................................................ 123SMG: Surface Machining (EDU-CAT-E-SMG-F - V5R19) ................................................... 124STL: STL Rapid Prototyping (EDU-CAT-E-STL-F - V5R19) ................................................ 126

Product Synthesis Solutions ............................................................................. 127HMN: Human Modeling (EDU-CAT-E-HMN-F - V5R19) ...................................................... 128KBE: Knowledge-Based Engineering (EDU-CAT-E-KBE-F - V5R19) ................................. 130KBE: Knowledge-Based Engineering (EDU-CAT-E-KBE-A - V5R19) ................................. 131KWA: Knowledge Advisor (EDU-CAT-E-KWA-F - V5R19) .................................................. 132KWE: Knowledge Expert (EDU-CAT-E-KWE-F - V5R19) ................................................... 133KWF: Knowledge Fundamentals (EDU-CAT-E-KWF-F - V5R19) ....................................... 134PEO: Product Engineering Optimizer (EDU-CAT-E-PEO-F - V5R19) ................................. 135PKT: Product Knowledge Template (EDU-CAT-E-PKT-F - V5R19) .................................... 136

Shape Design & Styling Solutions .................................................................... 137ABF: Automotive Body in White Fastening (EDU-CAT-E-ABF-A - V5R19) ......................... 138CTS: Cloud to Surface (EDU-CAT-E-CTS-A - V5R19) ........................................................ 139DL1: Developed Shapes (EDU-CAT-E-DL1-F - V5R19) ...................................................... 140DSE: Digitized Shape Editor (EDU-CAT-E-DSE-F - V5R19) ............................................... 141DSS: Shape Sculptor (EDU-CAT-E-DSS-F - V5R19) .......................................................... 142FSK: FreeStyle Sketch Tracer (EDU-CAT-E-FSK-F - V5R19) ............................................ 143FSS: FreeStyle Shaper, Optimizer & Profiler (EDU-CAT-E-FSS-F - V5R19) ...................... 144GSD: Surface Design Expert (EDU-CAT-E-GSD-F - V5R19) ............................................. 145GSO: Generative Shape Optimizer (EDU-CAT-E-GSO-F - V5R19) .................................... 147HD2: Generative Shape Design V5R19 Update (EDU-CAT-E-HD2-U - V5R19) ................. 148IMA: Imagine & Shape (EDU-CAT-E-IMA-F - V5R19) ......................................................... 149MTH: Introduction to the Mathematical Concepts of CATIA V5 (EDU-CAT-E-MTH-A - V5R19)QSR: Quick Surface Reconstruction (EDU-CAT-E-QSR-F - V5R19) .................................. 151RSO: Realistic Shape Optimizer (EDU-CAT-E-RSO-F - V5R19) ........................................ 152V5S: V5 Surface Design (EDU-CAT-E-V5S-F - V5R19) ...................................................... 153


CATIA Course Material

Analysis Solutions

CATIA V5R19 Course Catalog Jan 23, 2009 5/153

AnalysisSolutions

EST: ELFINI Structural Analysis

EDU-CAT-E-EST-FCourse Code EDU-CAT-E-EST-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-EST-FI-V5R19 Foils: EDU-CAT-E-EST-FF-V5R19 Exercises: EDU-CAT-E-EST-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Use the advanced pre-processing capabilities (such as loads and boundaryconditions) to create more realistic FE models. - Visualize the images of objects used for pre-processing (which is not possiblein GPS). - Use advanced case features (such as Buckling, MultiLoads, Envelope) inaddition to the standard Static and Frequency cases - Create your own result image templates, customize the post-processing resultimages, group selective entitites in the result images, and create advancedreports

Participants' ProfileMechanical DesignersStructural Analysts

PrerequisitesGenerative Part Structural Analysis Fundamentals, Generative AssemblyStructural Analysis, FEM Surface Meshing

Content- Introduction to EST Analysis- Advanced Pre-Processing- Advanced Analysis Case Management- Advanced Post-Processing- Master Exercises- Added Exercises

ExercisesEx. 1: Advanced Analysis of Landing Gear Assembly (120min) / AerospaceEx. 2: Blade Analysis (120min) / Aerospace


AnalysisSolutions

FMD: FEM Solid

EDU-CAT-E-FMD-FCourse Code EDU-CAT-E-FMD-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-FMD-FI-V5R19 Foils: EDU-CAT-E-FMD-FF-V5R19 Exercises: EDU-CAT-E-FMD-FX-V5R19 Detailed Steps: EDU-CAT-E-FMD-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Use different solid meshers such as Tetrahedron Filler, OCTREE TetrahedronMesher, Sweep3D Mesher - Create a solid mesh using mesh part transformations like Translation,Rotation, and Symmetry on 3D mesh parts - Analyze the solid meshes using the available mesh quality criteria - Import/Export the meshes into/from CATIA

Participants' ProfileMechanical Designers

Prerequisites- Generative Part Structural Analysis Fundamentals- Generative Part Structural Analysis Expert- Generative Assembly Structural Analysis- FEM Surface Meshing


ContentThis course will teach you how to generate a 3D tetrahedron mesh by focusingon the transformation methods used to create new mesh models from anexisting 2D or 3D mesh. It will teach you how to analyze the quality of theresulting mesh and visualize internal mesh elements.

Introduction to FEM Solid- What is FEM Solid- User Interface- General Process for Solid Mesh Generation- Accessing the Workbench

Tetrahedron Filler- What is Tetrahedron Filler- Tetrahedron Filler Parameters- Generating Solid Mesh Using Tetrahedron Filler

OCTREE Tetrahedron Mesher- What is OCTREE Tetrahedron Mesher- OCTREE Tetrahedron Mesher - Local Parameters- OCTREE Tetrahedron mesher - Quality Parameters- OCTREE Tetrahedron mesher - Other Parameters- Generating Mesh Using OCTREE Tetrahedron Mesher

Sweep 3D- What is Sweep 3D- Generating Solid Mesh Using Sweep 3D

Mesh Part Transformations- What is Mesh Part Transformations- Solid Mesh Generation Using Translation- Solid Mesh Generation Using Rotation- Solid Mesh Generation Using Symmetry

Mesh Part Extrusion- What is Mesh Part Extrusion- Solid Mesh Generation Using Extrusion with Translation- Solid Mesh Generation Using Extrusion with Rotation- Solid Mesh Generation Using Extrusion with Symmetry- Solid Mesh Generation Using Extrusion along Spine

Mesh Analysis and Mesh Data Transfer- Quality Analysis- Cutting Plane Analysis- Import/Export Meshes

ExercisesEx. 1: OCTREE Tetrahedron Mesher (15min) / All sectorsEx. 2: Solid Meshing Using Sweep 3D (5min) / All sectorsEx. 3: Mesh Part Transformation (15min) / All sectorsEx. 4: Mesh Part Extrusion (15min) / All sectorsEx. 5: Master Exercise: Meshing of an Engine Cylinder Block (60min) / Allsectors


AnalysisSolutions

FMS: FEM Surface

EDU-CAT-E-FMS-FCourse Code EDU-CAT-E-FMS-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-FMS-FI-V5R19 Foils: EDU-CAT-E-FMS-FF-V5R19 Exercises: EDU-CAT-E-FMS-FX-V5R19 Detailed Steps: EDU-CAT-E-FMS-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Use the various Meshers such as Surface Mesher, Advanced SurfaceMesher, Beam Mesher, and OCTREE Triangle Mesher - Create a new mesh using existing mesh with the help of mesh transformationtools and mesh operators - Edit the mesh using the mesh edition tools available within the abovementioned meshers - Analyze the mesh quality using mesh quality checks and tools like FreeEdges, Duplicate Elements, Duplicate Nodes, Mesh Interference Checks, etc.


Prerequisites- Generative Part Structural Analysis Fundamentals- Generative Assembly Structural Analysis

ContentThis course will teach you how to create a FE model for a complex surfacepart, and how to simplify geometric data so as to optimize the meshingprocess. You will learn how to manage surface and beam meshes, modifymeshes and node distributions, and perform interference and quality checks.

- Introduction to FEM Surface- Advanced Surface Mesh- Surface Mesh- OCTREE Triangle Mesher- Mesh Operators- Mesh Transformations- Update Mesh- Mesh Analysis Tools- Import/Export Meshes- Welding Connections


ExercisesEx. 1: Floor Mesh (20min) / All sectorsEx. 2: Fuselage Door Static Analysis (30min) / All sectorsEx. 3: Surface Mesher (75min) / All sectorsEx. 4: Octree Mesh on Block Cylinder (15min) / All sectorsEx. 5: Hybrid Mesh: 1D and 2D (30min) / All sectorsEx. 6: Extrude 1D Element Into 2D Mesh (15min) / All sectorsEx. 7: Mesh Parameters Exposition to Knowledge (30min) / All sectorsEx. 8: Mesh Parameters Exposition to Knowledge 2 (10min) / All sectorsEx. 9: Mesh Parameters Exposition to Knowledge 3 (5min) / All sectorsEx. 10: Meshing Parametric Conceptual Body (60min) / All sectorsEx. 11: Seam Welding Analysis (60min) / All sectorsEx. 12: Compatible Seam Welds (30min) / All sectorsEx. 13: Spot Welding With Hemming (15min) / All sectorsEx. 14: Fuselage Connection (60min) / All sectorsEx. 15: Master Exercise 1: Meshing of a Crossmember (60min) / All sectorsEx. 16: Wing Structure Analysis (60min) / All sectors


AnalysisSolutions

GAS: Generative Assembly Structural Analysis

EDU-CAT-E-GAS-FCourse Code EDU-CAT-E-GAS-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-GAS-FI-V5R19 Foils: EDU-CAT-E-GAS-FF-V5R19 Exercises: EDU-CAT-E-GAS-FX-V5R19 Detailed Steps: EDU-CAT-E-GAS-FS-V5R19

Objectives- Use different types of hypotheses for an assembly analysis- Define analysis connections between assembly components- Use existing assembly constraints to automatically create connections- Assign a connection property to the appropriate analysis connection- Compute a static analysis for an assembly- Create and manage an analysis assembly model from existing meshed parts


PrerequisitesGenerative Part Structural Analysis Fundamentals Generative Part Structural Analysis Expert


ContentThis course will teach you how to perform a Finite Element Analysis using anexisting assembly, and will focus on the creation of connections betweenassembly components and how to assign appropriate connection properties.You will also learn how to create an analysis assembly from existing meshedparts.

Introduction to GAS- What is Generative Assembly Structural Analysis-Assembly Analysis Overview-Analysis Assembly Overview-what is GAS-Hypotheses Used for Analysis

Analysis Connections-What is Analysis Connection-General Analysis Connection-Defining Line Analysis Connections-Defining Point Analysis Connections-Defining Surface Analysis Connections-Points to Points Analysis Connection

GAS Connections-Face Face Connection Properties-Distant Connection Properties-Welding Connection Properties-Nodes to Nodes Connection Property

Analysis Assembly Management-What is Analysis Assembly-Why Use Analysis Assembly-Analysis Assembly Process-What is Shape Representation-How to Attach Shape to Part-What is Analysis Assembly 2D Viewer-How to Use Analysis Assembly 2D Viewer

ExercisesEx. 1: ‘Pressure Fitting’ Connections between Rod and Axis (20min) / AllsectorsEx. 2: ‘Face Face’ Connection Properties Recap Exercise (30min) / All sectorsEx. 3: Distant Connection Property Recap Exercise (60min) / All sectorsEx. 4: Analysis Assembly (60min) / All sectorsEx. 5: Master Exercise: Assembly Analysis Presentation (90min) / All sectors


AnalysisSolutions

GDY: Generative Dynamic Response Analysis

EDU-CAT-E-GDY-FCourse Code EDU-CAT-E-GDY-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-GDY-FI-V5R19 Foils: EDU-CAT-E-GDY-FF-V5R19 Exercises: EDU-CAT-E-GDY-FX-V5R19 Detailed Steps: EDU-CAT-E-GDY-FS-V5R19

Objectives- Recognize the differences between harmonic and transient analyses- Define load and restraint excitations- Ensure that the appropriate pre-requisites are defined for the requiredexcitation case- Visualize and animate 3D images of the analysis results- Generate translation, velocity and acceleration graphs- Export result data in Text or Excel format


PrerequisitesGenerative Part Structural Analysis Fundamentals Generative Part Structural Analysis Expert

ContentThis course will teach you how to perform a harmonic or transient analysis on asingle part using finite elements. You will learn how to generate and visualize2D graphical results and how to export the resulting data.

Introduction to GDY-What are the Different Types of Dynamic Analysis-Load or Restraint Excitation-Prerequisites

GDY Preprocessing-Harmonic Response Case-Transient Response Analysis

Results Visualization- Generating Images- Generating 2D Display

ExercisesEx. 1: Master Exercise: Transient Dynamic Analysis (60min) / All sectors


AnalysisSolutions

GPE: Generative Part Structural Analysis Expert

EDU-CAT-E-GPE-FCourse Code EDU-CAT-E-GPE-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-GPE-FI-V5R19 Foils: EDU-CAT-E-GPE-FF-V5R19 Exercises: EDU-CAT-E-GPE-FX-V5R19 Detailed Steps: EDU-CAT-E-GPE-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Define and customize material properties - Apply pressure, acceleration and force density loads; and define virtual parts - Apply pivot, ball-joint, and user-defined restraints - Compute a frequency analysis for a single part - Create planar sections with which to visualize internal result values - Compute and refine a mesh using adaptive meshing in order to achieve apre-defined accuracy


PrerequisitesCATIA V5 FundamentalsGenerative Part Structural Analysis Fundamentals

ContentThis course will focus on advanced Finite Element Analysis pre-processingtechniques and post-processing tools, including the concept of virtual parts toavoid excessive geometric modeling. It will teach you how to perform afrequency analysis on a single part, and the use of adaptive meshing toachieve pre-defined accuracy.

GPS Advanced Pre-Processing Tools- Advanced Pre-Processing Tools- Frequency Analysis

Computation- Computing a Frequency Case- Computing with Adaptivity- Historic of Computation

GPS Advanced post-Processing Tools- Results Visualization- Results Management- Refinement

ExercisesEx. 1: Pre-Processing (20min) / All sectorsEx. 2: Results Visualization (10min) / All sectorsEx. 3: Results Visualization (10min) / All sectorsEx. 4: Master Exercise: Frequency Analysis (60min) / All sectors


AnalysisSolutions

GPF: Generative Part Structural AnalysisFundamental

EDU-CAT-E-GPF-FCourse Code EDU-CAT-E-GPF-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-GPF-FI-V5R19 Foils: EDU-CAT-E-GPF-FF-V5R19 Exercises: EDU-CAT-E-GPF-FX-V5R19 Detailed Steps: EDU-CAT-E-GPF-FS-V5R19

ObjectivesThis course covers the main tools for Structural Analysis on a single part.Throughout this course, you will learn how to perform a basic static analysisusing the finite elements method.

Participants' ProfileCATIA Designers

PrerequisitesCATIA V5 Fundamentals

ContentIntroduction to Finite Element Analysis- What is Finite Element Analysis- Why to Use Finite Element Analysis- Application of Finite Element Analysis

Introduction to GPS Analysis- Accessing the Generative Part Structural Analysis Workbench- The Generative Part Structural Analysis Interface- The GPS General Process- The Generative Part Structural Analysis Tree Structure

GPS Pre-Processing- Managing Mesh-Part- Defining Restraints- Defining Loads

Computation- Specifying the External Storage- Computing a Static Case

GPS Post-Processing - Results Visualization- Results Management- Refinement

Managing Analysis- About Saving an Analysis Document- About Save As- How to Use Save Management- Saving Document Using ‘Send To’ Mechanism- User Settings

Notes


ExercisesEx. 1: Pre-Processing (10min) / All sectorsEx. 2: Computation (5min) / All sectorsEx. 3: Results Visualization (10min) / All sectorsEx. 4: Refinement (10min) / All sectorsEx. 5: Mesh Refinement with Precision (60min) / All sectorsEx. 6: Results Management (10min) / All sectorsEx. 7: Master Exercise: Static Analysis (50min) / All sectors


AnalysisSolutions

V5A: CATIA V5 for Analysis

EDU-CAT-E-V5A-FCourse Code EDU-CAT-E-V5A-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V5A-FI-V5R19 Foils: EDU-CAT-E-V5A-FF-V5R19

ObjectivesThis course is designed using a process-based approach to training. Ratherthan focusing on individual features and functions, this course emphasizes onthe processes and procedures required to complete a particular task. By usingthe case studies to illustrate these processes, you will learn the necessarycommands, options, and menus within the context of completing a design task.

Participants' ProfileNew CATIA V5 mechanical designers

PrerequisitesStudents attending this course should have the following experience:- Mechanical design experience- CATIA Basics

Content- Introduction to Finite Element Analysis- Pre-processing- Computation- Post-processing- Mesh refinement- Assembly Structural Analysis

ExercisesEx. 1: Introducation to Finite Element Analsyis (130min) / All sectorsEx. 2: Pre-processing (90min) / All sectorsEx. 3: Computation (45min) / All sectorsEx. 4: Post-processing (45min) / All sectorsEx. 5: Mesh Refinement (15min) / All sectorsEx. 6: Assembly Structural Analysis (60min) / All sectorsEx. 7: Master Project (120min) / All sectors



Equipment & Systems Engineering Solutions


Equipment & SystemsEngineering

Solutions

CBD: Circuit Board Design

EDU-CAT-E-CBD-FCourse Code EDU-CAT-E-CBD-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CBD-FI-V5R19 Foils: EDU-CAT-E-CBD-FF-V5R19 Exercises: EDU-CAT-E-CBD-FX-V5R19 Detailed Steps: EDU-CAT-E-CBD-FS-V5R19

ObjectivesUpon completion of this course you will be able to create Printed Circuit Boards(PCB) in context of Assemblies and export/import them to/from an ECAD toolusing the IDF interface.

Participants' ProfileElectrical Designers

PrerequisitesStudents attending this course should have the knowledge of CATIA V5Fundamentals, Part Design, Assembly Design

Content- Introduction to Circuit Board Design- Creating the PCB geometry with Mounting Holes- Constraint Areas and Components- Export and Import using the IDF Interface- Creating a Catalog of Electrical Components

ExercisesEx. 1: Connector Box (40min) / Electronics & ElectricalEx. 2: Camera (30min) / Electronics & Electrical



Solutions

CNA: Compartment & Access

EDU-CAT-E-CNA-FCourse Code EDU-CAT-E-CNA-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CNA-FI-V5R19 Foils: EDU-CAT-E-CNA-FF-V5R19 Exercises: EDU-CAT-E-CNA-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - To define conceptual zones/compartments within a ship. - To define access mechanisms for compartments, such as doors, windowsand ladders. - Generate Reports.

Participants' ProfileExperienced CATIA V5 Users

PrerequisitesStudents attending this course should have knowledge of CATIA V5Fundamentals

Content- Compartment and Access Design Overview- Skeleton- Safety Zones- Wall System Creation- Compartment Generation- Feature Dictionary Application- Casings- Access Part / Opening / Compartment Membership- Drawing Extraction- Reports Management- Modifications Management

ExercisesEx. 1: Master Exercise: Compartment and Access (480min) / All sectors



Solutions

CNS: Compartment & Access Setup

EDU-CAT-E-CNS-FCourse Code EDU-CAT-E-CNS-FCATIA V5R19Brand & Release CATIA V5R194 daysDuration 4 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CNS-FI-V5R19 Foils: EDU-CAT-E-CNS-FF-V5R19 Exercises: EDU-CAT-E-CNS-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Setup and administrate catalogs for the Compartment and Access - Manage the Feature Dictionary, Drawing Extraction and Design Rules

Participants' ProfileExperienced CATIA V5 users

PrerequisitesStudents attending this course should have experience in Equipment &Systems Setup and Administration and Compartment and Access Workbench

Content- Compartment & Access Setup Overview- Feature Dictionary Management- Design Rules Management- Compartment & Access Parts Creation- Catalog Setup- Drawing Extraction Setup

ExercisesEx. 1: Master Exercise: Compartment and Access Setup (480min) / All sectors



Solutions

EHF: Electical Harness Flattening

EDU-CAT-E-EHF-FCourse Code EDU-CAT-E-EHF-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-EHF-FI-V5R19 Foils: EDU-CAT-E-EHF-FF-V5R19 Foils: EDU-CAT-E-EHF-FF-V5R19

ObjectivesUpon completion of this course you will be able to: - Flatten and synchronize the electrical or the geometrical harnesses - Modify the bundle segments of a harness to fit your drawing - Define and generate reports - Create 2D drawings of 3D harnesses - Create Text Templates Catalog

Participants' ProfileElectrical V5 users

PrerequisitesPRO-F: CATIA Tools for Proficient UsersEHI-F: Electrical Harness InstallationELB-F: Electrical Librarian

Content- Introduction to Harness Flattening- Harness Flattening parameters- Harness flattening modifications- Synchronize Flattened Harness- Links visualization- Report Generation- Creating Harness Drawings- Creating Text Template Catalogs- Replacing Graphic Representations- Generate Annotations Automatically

ExercisesEx. 1: Harness Documentation / Electronics & ElectricalEx. 2: Harness Flattening / Electronics & ElectricalEx. 3: Harness Documentation (2) / Electronics & ElectricalEx. 4: Harness Flattening (2) / Electronics & ElectricalEx. 5: Text Template Catalog Creation / Electronics & ElectricalEx. 6: Create Harness Drawing / All sectors



Solutions

ELI: Electrical Librarian & Harness Installation

EDU-CAT-E-ELI-FCourse Code EDU-CAT-E-ELI-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ELI-FI-V5R19 Foils: EDU-CAT-E-ELI-FF-V5R19 Exercises: EDU-CAT-E-ELI-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Build and manage an Electrical Components Catalog.- Design a harness integrated within the Digital Mock-Up.- Connect bundle segments to electrical components.

Participants' ProfileElectrical Harness Designers

PrerequisitesCatalog Editorart DesignCATIA V5 basics (mandatory)

Content- Introduction to Electrical Library Products- Electrical Components Definition- Electrical Librarian Catalog Management- Electrical Assemblies- Introduction to Electrical Harness Installation- Electrical Harness Settings- Creating a Geometrical Bundle Segment- Managing Branch Points, Branches and Local Slack- Managing Protections- Links Management- Support Management- Measuring Geometrical Bundle Inertia- V4 V5 Data Migration- Wire Management- Importing Electrical External Data For 3D Implementation


ExercisesEx. 1: Creating a catalog (10min) / All sectorsEx. 2: Defining a set of electrical components (40min) / All sectorsEx. 3: Store components in a catalog (15min) / All sectorsEx. 4: Define an assembly with the components from the catalog (15min) / AllsectorsEx. 5: Create a protection and store it into a catalog (15min) / All sectorsEx. 6: Bundle Segment Definition (15min) / All sectorsEx. 7: Create an adaptative support and position Bundle Segment (30min) / AllsectorsEx. 8: Link a bundle segment (10min) / All sectorsEx. 9: Add a Support to a Bundle Segment (5min) / All sectorsEx. 10: Add Local Slack to Bundle Segment portion (5min) / All sectorsEx. 11: Manage the bundle segment section (30min) / All sectorsEx. 12: Transfer Branches (15min) / All sectorsEx. 13: Instantiate a Protection (15min) / All sectorsEx. 14: Adjusts Diameter (10min) / All sectorsEx. 15: Split a Bundle Segment (10min) / All sectorsEx. 16: Define a Bundle Segment (20min) / All sectorsEx. 17: Harness Design / All sectorsEx. 18: Geometrical bundle inertia / All sectorsEx. 19: Knowledge (20min) / All sectorsEx. 20: External Data (30min) / All sectorsEx. 21: Electrical Harness installation / All sectorsEx. 22: Car Door / All sectors



Solutions

EQS: Equipment Arrangement Setup & Catalogs

EDU-CAT-E-EQS-FCourse Code EDU-CAT-E-EQS-FCATIA V5R19Brand & Release CATIA V5R193 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-EQS-FI-V5R19 Foils: EDU-CAT-E-EQS-FF-V5R19 Exercises: EDU-CAT-E-EQS-FX-V5R19

ObjectivesUpon completion of this course you will be able to Setup and administratecatalogs for the Equipment Arrangement Setup workbench.

Participants' ProfileExperienced CATIA V5 users.2D diagrams and 3D catalogs administrators.

PrerequisitesESA : Equipment & Systems Setup and AdministrationEQT : Equipment Arrangement

Content- Equipment Arrangement overview- Feature dictionary management- Design rules management- 2D Diagrams catalogs creation- Equipment parts creation- Equipment library catalogs

ExercisesEx. 1: Creating a feature dictionary (60min) / All sectorsEx. 2: Managing Design Rules (40min) / All sectorsEx. 3: Creating a 2D diagram catalogs (120min) / All sectorsEx. 4: Creating catalog parts (240min) / All sectorsEx. 5: Creating a 3D library catalog (120min) / All sectors



Solutions

EQT: Equipment Arrangement

EDU-CAT-E-EQT-FCourse Code EDU-CAT-E-EQT-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-EQT-FI-V5R19 Foils: EDU-CAT-E-EQT-FF-V5R19 Exercises: EDU-CAT-E-EQT-FX-V5R19

ObjectivesUpon completion of this course, you will be able to place equipments andmanage their positions in space and generate reports and drawings.



Content- Equipment Arrangement Overview- Placing Equipments- Modifying Equipment Arrangement- Design and Query Analysis- Generating Drawings and Reports

ExercisesEx. 1: Managing Equipment Arrangement (Master Exercise) (75min) / Allsectors



Solutions

ES1: Equipment & Systems Environment

EDU-CAT-E-ES1-FCourse Code EDU-CAT-E-ES1-FCATIA V5R19Brand & Release CATIA V5R190.2 dayDuration 0.2 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ES1-FI-V5R19 Foils: EDU-CAT-E-ES1-FF-V5R19

ObjectivesUpon completion of this course, you will become familiar with -Organization of Equipment & Systems Courses-Training Data-Project Resource Management.

Participants' ProfileEnd users and administrators that is about to participate to E&S trainings.

PrerequisitesNone

Content- CATIA: Domain and Workbenches- Workbench vs. Design data- Definitions and conventions- Data Structure Definitions and Organization- Training Data Organization- Data Adjustment- PRM – Project Resource Management

ExercisesNone



Solutions

ES2: Generic Routing

EDU-CAT-E-ES2-FCourse Code EDU-CAT-E-ES2-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ES2-FI-V5R19 Foils: EDU-CAT-E-ES2-FF-V5R19 Exercises: EDU-CAT-E-ES2-FX-V5R19

ObjectivesUpon completion of this course, you will be able to -Organize the data-Organize the route-Modify the runs-Manipulate objects



Content- Introduction to Generic Routing- Generic Routing- Routing a Run- Modifying a Run- Manipulating Objects

ExercisesEx. 1: Master Exercise 1 (120min) / All sectors



Solutions

ESA: Equipment & Systems Setup and Administration

EDU-CAT-E-ESA-FCourse Code EDU-CAT-E-ESA-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ESA-FI-V5R19 Foils: EDU-CAT-E-ESA-FF-V5R19

ObjectivesUpon completion of this course, you will be able to:- Create the structure and organize the data- Create the site and Project directories- Set up the project environment- Configure and manage the project resources- Set up the project- Define the drafting standards, Generative View Styles and Backing Sheets

Participants' ProfileExperienced CATIA V5 users.


Content- Introduction- Data Structure Definitions and Organizations- Site and Project structure creation- Environment Setup- PRM configuration- Project Setup- Drafting Setup

ExercisesEx. 1: Create a new project / All sectors



Solutions

EWR: Electrical Wire Routing

EDU-CAT-E-EWR-FCourse Code EDU-CAT-E-EWR-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-EWR-FI-V5R19 Foils: EDU-CAT-E-EWR-FF-V5R19 Exercises: EDU-CAT-E-EWR-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Route signals- Create wires- Integrate external tools with CATIA electrical products

Participants' ProfileNew V5 CATIA electrical users

PrerequisitesCATIA V5 Part DesignCATIA V5 Assembly Design

Content- Introduction to Electrical Wire Routing- Importing External Data- Managing the Wires

ExercisesEx. 1: External Data Exchange (60min) / All sectorsEx. 2: External Data (60min) / All sectorsEx. 3: External Data Exchange (60min) / All sectors



Solutions

HVA: HVAC Design

EDU-CAT-E-HVA-FCourse Code EDU-CAT-E-HVA-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-HVA-FI-V5R19 Foils: EDU-CAT-E-HVA-FF-V5R19 Instructor Foils: EDU-CAT-E-HVA-FI-V5R19

ObjectivesUpon completion of the course you will learn how to: - Use the HVAC Design workbench - Create HVAC design routing - Place the HVAC parts on the lines - Modify the HVAC design - Generate documents


PrerequisitesStudents attending this course must have knowledge of EQT and ES2.

Content- Introduction to HVAC Design- HVAC Lines ID Management- Defining the Routing- HVAC Parts Placement- HVAC Design Modification- Documents Generation

ExercisesEx. 1: Managing HVAC Design (Master Exercise) (65min) / All sectors



Solutions

HVD: HVAC Diagrams

EDU-CAT-E-HVD-FCourse Code EDU-CAT-E-HVD-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-HVD-FI-V5R19 Foils: EDU-CAT-E-HVD-FF-V5R19

ObjectivesUpon completion of this course you will be able to:- Create and modify Diagrams- Create and manage Zone- Generate Reports- Import Design Checks and Detect Design Failures�



Content- Introduction to HVAC Diagram- HVAC Diagram Creation- Zone Creation and Management- Diagram Modifications- Report Generation- Design Checks and Rules- Network Analysis and Object Navigator

ExercisesNone



Solutions

HVS: HVAC Setup & Catalogs

EDU-CAT-E-HVS-FCourse Code EDU-CAT-E-HVS-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesNone

ObjectivesIn this course you will learn how to setup and administrate catalogs for theHVAC discipline.

Participants' ProfileExperienced CATIA V5 users.

PrerequisitesEquipment & Systems Setup and Administration HVAC DiagramsFundamentals HVAC Design

Content- HVAC overview- Feature dictionary management- HVAC Standard management- Design Rules management- 2D Diagrams catalogs creation- HVAC parts preparation- HVAC parts creation- 3D HVAC library catalogs- HVAC Material Specifications- HVAC Insulation Specifications- HVAC lines

ExercisesEx. 1: Exercise 1 : Create a feature dictionary (80min) / All sectorsEx. 2: Exercise 2 : Create a HVAC Standard (40min) / All sectorsEx. 3: Exercise 3 : Manage Design Rules (90min) / All sectorsEx. 4: Exercise 4 : Create a 2D diagram catalog (180min) / All sectorsEx. 5: Exercise 5 : Create “Template” HVAC parts (240min) / All sectorsEx. 6: Exercise 6 : Create “Typed” HVAC parts (90min) / All sectorsEx. 7: Exercise 7 : Create a 3D library catalog (90min) / All sectorsEx. 8: Exercise 8 : Create HVAC Specifications (40min) / All sectors



Solutions

PID: Piping & Instrumentation Diagrams

EDU-CAT-E-PID-FCourse Code EDU-CAT-E-PID-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PID-FI-V5R19 Foils: EDU-CAT-E-PID-FF-V5R19 Exercises: EDU-CAT-E-PID-FX-V5R19

ObjectivesUpon completion of this course you will be able to- Create and manage logical designs of piping systems

Participants' ProfilePiping Designers and Instrumentation Engineers

PrerequisitesStudents attending this course should have knowledge of CATIA V5 Basics


ContentPiping and Instrumentation Overview- Piping and Instrumentation Diagrams in Piping Design Process- Project Resource Management Selection- Accessing the Piping and Instrumentation Diagrams Workben...- Creating a New Piping and Instrumentation Diagrams Docume...- Adding a frame on the document- Grid Settings- User Interface: Piping and Instrumentation Diagrams IconsPiping Equipments Creation and Settings- Placing Equipments and Nozzles- Connectors Description- Moving Equipments and Nozzle- Organizing Objects Under the Products Node- Organizing Objects by Application GroupPiping Lines Creation and Settings- Creating Piping Lines ID- Creating Route Piping Lines Between Equipments- Modifying Piping Lines- Gapping Lines SettingsDiagram Construction- Adding Diagram Annotations- Insert Inline Components- Schematic Translate- Stretch Operations- Flow Management- Choosing Physical Part- Copy Attribute- Rename ID- Lock Shape- Importing a Drafting View into a Diagram- Zone Creation and Management- Adding Sheet ConnectorsDiagram Modifications and Updates- Flipping Inline Components- Modifying Object Properties- Swap Graphic Modifications- Replacing a Component- Modifying AnnotationsGenerating Reports- Defining Report- Generating Report- Inserting Report in the DiagramDesign Checks- Importing Design Checks- Applying Rules- Detecting and Reporting FailuresDiagram Design - Master Exercise Step 6Analysis- Network Analysis- Object Navigator

ExercisesEx. 1: Creating Diagram Design : Master Exercise (60min) / All sectors



Solutions

PIP: Piping Design

EDU-CAT-E-PIP-FCourse Code EDU-CAT-E-PIP-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PIP-FI-V5R19 Foils: EDU-CAT-E-PIP-FF-V5R19 Exercises: EDU-CAT-E-PIP-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Manage piping line IDs- Define a routing- Place, orient, and locate piping parts- Modify a piping design by resizing, re-specifying, and managing flow direction- Define reports, generate reports and drawings


PrerequisitesStudents attending this course should have knowledge of EQT & ES2


Content- Introduction to Piping Design - Accessing the workbench - User Interface: Piping Design Icons - User Interface: General Environment Icons - General Process - Project Management Selection - General Options Using Piping Design- Piping Lines ID Management - Piping Line ID Introduction - Piping Line ID Selection - Piping Line ID Creation - Piping Line ID Change Member’s - Piping Line ID Deletion- Defining the routing - Selecting the Line ID - Routing the run - Turn rules - Schematic driven- Piping Parts Placement - Place Piping Part - Piping Part Orientation - Piping Part Location - Multi-Place Parts - Schematic Driven - Other options- Piping Design Modification - Resize/Respec components selection - Resize - Respec - Manage Flow direction - Manage Graphic Representations - Transfer Elements - Manage Auto-Parts - Adjust to Fit - Adjust Layout - Copy/Paste 3D Systems - Measuring Distance Between Elements - Design Validation - Function Physical Integration- Documents Generation - Creating Spools - Generating Isometrics - Drawing Generation - Search Definition - Reports Definition - Reports Generation - Reports Generation Using Macros

ExercisesEx. 1: Managing Piping Design (Master Exercise) (50min) / All sectors



Solutions

PIS: Piping Setup and Catalogs

EDU-CAT-E-PIS-FCourse Code EDU-CAT-E-PIS-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PIS-FI-V5R19 Foils: EDU-CAT-E-PIS-FF-V5R19 Exercises: EDU-CAT-E-PIS-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Setup and administrate catalogs for the Piping discipline- Manage the Feature Dictionary, Piping Standard, and Design Rules- Create 2D Diagrams Catalogs, Piping Parts, and Piping Specifications�


PrerequisitesStudents attending this course should have experience in Equipment &Systems Setup and Administration, Piping & Instrumentation DiagramsFundamentals, and Piping Design


ContentPiping Overview- General Description- Installation Overview- Description of the Setup and Catalogs StepsFeature Dictionary Management- Feature Dictionary General Description- Feature Dictionary Creation- Classes and Subclasses- Attributes- ID Schema- Generate a Report of the Content- PRM ResourcesPiping Standard Management- Piping Standard Presentation- Files and Directory Management- Piping Standard Discrete Values Management- Standard Catalog Document CreationDesign Rules Management- Design Rules Usage- Compatibility Table- Functional/ Physical Mapping- Automatic Part Placement- Attributes Filtering- Cutout Clearance (ENOVIA Based)- Isometrics Mapping- ISO- componentOptions- Discrete Values2D Diagrams Catalogs Creation- Symbol Creation- Catalog Creation- ATS CreationPiping Parts Preparation- Graphical Representations- Connector Attributes- Template Part CreationPiping Parts Creation- Typed Part Creation- Light Part Creation3D Piping Library Catalogs- Catalog Creation- Adding Parts- Catalogue Master Creation- PRM Management- Resolving a CatalogPiping Specifications- Files and Directory Management- Piping Specification Rules Management- Specification Catalog Document Creation- Piping Specification Families Creation- PRM ManagementPiping Insulation Specifications- Files and Directory Management- Piping Insulation Specification Tables Management- Insulation Specification Catalog Document Creation- PRM ManagementPiping and Instrumentation Lines- Lines Catalog Description- Lines Catalog Creation

ExercisesEx. 1: Creating a Feature Dictionary (40min) / All sectorsEx. 2: Creating a Piping Standard (40min) / All sectorsEx. 3: Creating a 2D Diagram Catalog (90min) / All sectorsEx. 4: Creating Typed piping parts (240min) / All sectorsEx. 5: Creating Template Piping Parts (180min) / All sectors



Solutions

PLO: Plant Layout

EDU-CAT-E-PLO-FCourse Code EDU-CAT-E-PLO-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PLO-FI-V5R19 Foils: EDU-CAT-E-PLO-FF-V5R19 Exercises: EDU-CAT-E-PLO-FX-V5R19

ObjectivesUpon completion of this course, you will learn how to:- Quickly use plant layout product.- Create a 3D layout for a manufacturing facility.



Content- Introduction to Plant Layout - Creating Areas and Boundaries- Defining Areas within Areas- Creating and Modifying Path Reservations- Creating, Populating Item Reservations, Modifying Positions- Placing and modifying Resources Positions- Managing System Assemblies, Networks, and Logical Sets - Generating a Report

ExercisesEx. 1: Creating Areas (20min) / All sectorsEx. 2: Defining Boundaries (20min) / All sectorsEx. 3: Defining Areas within Areas (30min) / All sectorsEx. 4: Creating Path Reservations (40min) / All sectorsEx. 5: Modifying Path Reservations (40min) / All sectorsEx. 6: Creating and Repositioning Item Reservations (20min) / All sectorsEx. 7: Placing Equipment into Reservations (10min) / All sectorsEx. 8: Modifying Equipment Reservations (20min) / All sectorsEx. 9: Placing and Modifying Resources Positions (40min) / All sectorsEx. 10: Build a Complete Layout with Resources (240min) / All sectorsEx. 11: Master Exercise: Plant Layout (480min) / All sectors



Solutions

SDD: Structure Detail Design

EDU-CAT-E-SDD-FCourse Code EDU-CAT-E-SDD-FCATIA V5R19Brand & Release CATIA V5R194 daysDuration 4 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SDD-FI-V5R19 Foils: EDU-CAT-E-SDD-FF-V5R19 Exercises: EDU-CAT-E-SDD-FX-V5R19

ObjectivesIn this course you will learn how define the structural components contributingto the global strength of the vessel (primary and secondary structures).


PrerequisitesStudents attending this course should be familiar with CATIA V5Fundamentals.

Content- Introduction to Structure Detail Design- Project & Settings- Product Structure & References- Stiffened Panels- Pillars & Beams- Detailing Features- Project Data Synchronization- Drafting- Reporting

What is new in this releaseNew course

ExercisesEx. 1: Ship Scantling (360min) / Shipbuilding



Solutions

SFD: Structure Functional Design

EDU-CAT-E-SFD-FCourse Code EDU-CAT-E-SFD-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SFD-FI-V5R19 Foils: EDU-CAT-E-SFD-FF-V5R19 Exercises: EDU-CAT-E-SFD-FX-V5R19

ObjectivesIn this course you will learn how define the structural components contributingto the global strength of the vessel (primary and secondary structures).



Content- Introduction to Structure Functional Design- Project & Settings- Product Structure & References- Stiffened Panels- Pillars & Beams- Detailing Features- FEM Integration- Functional Volumes & Planning Breaks- Project Data Synchronization- Drafting- Reporting

ExercisesEx. 1: Ship Scantling (360min) / Shipbuilding



Solutions

SSR: Systems Space Reservation

EDU-CAT-E-SSR-FCourse Code EDU-CAT-E-SSR-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SSR-FI-V5R19 Foils: EDU-CAT-E-SSR-FF-V5R19 Exercises: EDU-CAT-E-SSR-FX-V5R19

ObjectivesUpon completion of this course, you will learn how to:- Design and Modify Walkways.- Create and Modify Space Reservations. - Place Equipment into Reservations from Catalogs.- Modify Resources and Positions.

Participants' ProfileDesigners experienced in V5

PrerequisitesCATIA V5 Fundamentals, Equipment and Systems Environment

Content- Systems Space Reservation Overview- Creating and Modifying Path Reservations- Placing & Modifying Resources in Reservations- Creating and Managing Networks & Systems- Creating and Modifying Lofted Pathways


ExercisesEx. 1: Creating and modifying Path Reservations (40min) / Fabrication &Assemblies Consumer GoodsEx. 2: Populating Space Reservations, modifying Positions (10min) /Fabrication & Assemblies Consumer GoodsEx. 3: Lofted Pathways (70min) / Fabrication & Assemblies Consumer Goods



Solutions

STS: Structure Design Setup

EDU-CAT-E-STS-FCourse Code EDU-CAT-E-STS-FCATIA V5R19Brand & Release CATIA V5R193 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-STS-FI-V5R19 Foils: EDU-CAT-E-STS-FF-V5R19 Exercises: EDU-CAT-E-STS-FX-V5R19

ObjectivesIn this course you will learn how to setup and administer all the resourcesassociated to a ship or an off-shore project.




ContentIntroduction to Structure Detail Design- Accessing the workbench- Exploring the User InterfaceProject Resource Management & Settings- Understanding Project Resource Management- List of Resources- Modifying PRM- PRM and Resource syntax- Selecting a Project- Project Validation- Managing Errors- Setting Up your sessionFeature Dictionary- Feature Dictionary Definition- PRM resource- Feature Dictionary Editor for SFD and SDD- Feature Dictionary Editor for SR1Project’s Resources- Ship’s Coordinate System- Project Parameters- Molded Conventions- Project Envelope- Project DataStructure catalogs & Material management- Material Catalog- Creating Parametric Sections- Generating Resolved Parts- Thickness Definition- Specification Catalog- Material ManagementEndCut- Create Endcut Geometry using UDF technology- Creation of the Endcut image- Add Endcut to Detailing Feature CatalogSlot- Create Slot Geometry using UDF technology- Creation of the Slot image- Add Slot to Detailing Feature CatalogSmall Assembly- Create support geometry- Creation of small assembly images- Add Small Assembly to Detailing Feature CatalogDrafting- Customization of GVS file- Advanced view Creation- ATS Creation- ATS Automation- GVS file ModificationReporting- General- Creating a Report Template- Creating a Report

ExercisesEx. 1: Master Exercise: Project’s Setup (360min) / All sectors



Solutions

TUB: Tubing Design

EDU-CAT-E-TUB-FCourse Code EDU-CAT-E-TUB-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-TUB-FI-V5R19 Foils: EDU-CAT-E-TUB-FF-V5R19 Exercises: EDU-CAT-E-TUB-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Learn how the CATIA Tubing Design product could be used to quickly andefficiently create an intelligent tubing layout.


PrerequisitesStudents attending this course should have knowledge of CATIA V5Fundamentals, ES1, ES2 and EQT.

ContentIntroduction to Tubing DesignTubing Lines ID ManagementRouting in Tubing DesignTubing Parts PlacementManaging Tubing DesignsDocumentation Generation

ExercisesEx. 1: Creating, Modifying and Placing Parts on a Run (45min) / All sectorsEx. 2: Flexible and Bundle of Flexibles (40min) / All sectorsEx. 3: Global Exercise (60min) / All sectorsEx. 4: Generating Production Documents (30min) / All sectorsEx. 5: Schematic Driven Design (30min) / All sectors



Solutions

TUD: Tubing Diagrams

EDU-CAT-E-TUD-FCourse Code EDU-CAT-E-TUD-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-TUD-FI-V5R19 Foils: EDU-CAT-E-TUD-FF-V5R19 Exercises: EDU-CAT-E-TUD-FX-V5R19

ObjectivesThis course illustrates how the Tubing Diagram product could be used toquickly and efficiently create a schematic diagram.



Content- Introduction- Tubing Diagram Creation - Tubing Diagram Modification- Tubing Diagram Completion- Diagram Checks- Generating Reports- Analysis

ExercisesEx. 1: Tubing Diagrams (80min) / All sectors



Solutions

TUS: Tubing Catalogs (2D Diagrams & 3D Design)

EDU-CAT-E-TUS-ACourse Code EDU-CAT-E-TUS-ACATIA V5R19Brand & Release CATIA V5R194 daysDuration 4 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-TUS-AI-V5R19 Foils: EDU-CAT-E-TUS-AF-V5R19 Detailed Steps: EDU-CAT-E-TUS-AS-V5R19 Exercises: EDU-CAT-E-TUS-AX-V5R19

ObjectivesUpon completion of this course you will be able to: - Manage object classes in the Feature Dictionary - Create 2D Diagram Catalogs and 3D Design Catalogs - Create Standards Catalogs, Design Rules Catalogs - Create Reports - Customize the settings for Drawings


PrerequisitesStudents attending this course should have knowledge of CATIA V5Fundaments, Tubing Design, Tubing Diagrams and ESA

Content- Introduction to Tubing Catalogs- Managing Feature Dictionary- Setting up the Standards Catalog- Setting up the Design Rules Catalog- Creating 2D Diagrams Catalogs- Creating Tubing Parts- Creating a 3D Tubing Library Catalog- Creating a Specifications Catalog- Importing and Updating Line IDs- Creating a Report- Drawing Production Settings

ExercisesEx. 1: Master Exercise: Tubing Design (385min) / All sectorsEx. 2: Master Exercise: Tubing Diagrams (125min) / All sectors



Solutions

V5VE: CATIA V5 Automotive - Electrical

EDU-CAT-E-V5VE-FCourse Code EDU-CAT-E-V5VE-FCATIA V5R19Brand & Release CATIA V5R196 daysDuration 6 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V5VE-FI-V5R19 Foils: EDU-CAT-E-V5VE-FF-V5R19

ObjectivesThe aim of the CATIA V5 for Electrical Designers is to teach you how to buildparts and assemblies in CATIA, and how to make simple drawings of theseparts and assemblies. This course also teaches you to create a library ofelectrical parts, instantiate electrical devices from a catalog, route electricalharness in your digital mock-up, route wires in the harness, extract harness and create harness drawings.

Participants' ProfileAutomotive Electrical Harness DesignersNew Electrical V5 Users

PrerequisitesExperience in Mechanical Design

Content- Introduction to CATIA- Profile Creation- Basic Features- Assembly Design- Designing in Context- Drafting (ISO)- Introduction to Electrical Library Products- Creating Electrical Harness- Routing Electrical Wires- Flattening Electrical Harness- Creating Electrical Harness Documentation


ExercisesEx. 1: Master Project: V5 Automotive Electrical / All sectors



Infrastructure Solutions


InfrastructureSolutions

ADM: V5 Administration

EDU-CAT-E-ADM-FCourse Code EDU-CAT-E-ADM-FCATIA V5R19Brand & Release CATIA V5R193 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ADM-FI-V5R19 Foils: EDU-CAT-E-ADM-FF-V5R19 Exercises: EDU-CAT-E-ADM-FX-V5R19

ObjectivesThis course tells you how to install, customize and maintain CATIA V5 site

Participants' ProfileAdministrators of CATIA V5

Prerequisites- System Administration - CATIA Administration

Content- CATIA Installation- Licensing- Environment Management- Settings Management- Standards- Software Management- Tools- Data Managment- Interoperability

ExercisesEx. 1: CATIA V5 Installation on Windows (30min) / All sectorsEx. 2: Licensing (60min) / All sectorsEx. 3: Environment Management (20min) / All sectorsEx. 4: Settings Management (60min) / All sectorsEx. 5: Standards (15min) / All sectorsEx. 6: Software Management (60min) / All sectorsEx. 7: Tools (30min) / All sectorsEx. 8: Data Management (60min) / All sectorsEx. 9: Interoperability (15min) / All sectors



COM: Getting Started with CATIA V5

EDU-CAT-E-COM-FCourse Code EDU-CAT-E-COM-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-COM-FI-V5R19 Foils: EDU-CAT-E-COM-FF-V5R19 Exercises: EDU-CAT-E-COM-FX-V5R19

ObjectivesLaunch CATIA V5 and open V5 documentsUse some of the common menus and toolbarsChange from one CATIA workbench to anotherManipulate the CATIA V5 specification treeHide and display modelsChange a model rendering style

Participants' ProfileMechanical Designers with no CATIA V5 experience.

PrerequisitesMechanical Design The Windows operating system

ContentThis course will introduce you to the CATIA V5 interface, and how to use thecommon CATIA tools. It will focus on how to start CATIA V5, how to open aCATIA document and how to manipulate the model on the screen.

- Welcome to CATIA V5- The CATIA V5 Environment- Launching CATIA & Manipulating Objects- The Specification Tree- Objects Visualization

ExercisesEx. 1: Starting and Working with CATIA (10min) / All sectorsEx. 2: Objects Visualization (15min) / All sectors



DF1: Product Data Filtering

EDU-CAT-E-DF1-FCourse Code EDU-CAT-E-DF1-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-DF1-FI-V5R19 Foils: EDU-CAT-E-DF1-FF-V5R19 Exercises: EDU-CAT-E-DF1-FX-V5R19

ObjectivesIn the course you will learn how to use Product Data Filtering (DF1) to convertparts or products to datum surfaces and solids. The main objective of filtering is to hide the design process by removing allintermediate objects and associativity links. Another goal might be simply toreduce the size of models.

Participants' ProfileAll designers

PrerequisitesMechanical or hybrid design.

ContentIntroduction to Product Data Filtering- Why do you need DF1 ?Workbench presentation- Accessing the workbenchData Filtering - Filter a Part- Filter a Product

ExercisesEx. 1: Part (15min) / All sectorsEx. 2: Product (15min) / All sectors



PHS: Photo Studio

EDU-CAT-E-PHS-FCourse Code EDU-CAT-E-PHS-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PHS-FI-V5R19 Foils: EDU-CAT-E-PHS-FF-V5R19 Exercises: EDU-CAT-E-PHS-FX-V5R19 Detailed Steps: EDU-CAT-E-PHS-FS-V5R19

ObjectivesObjectives of the Course

Upon completion of this course you will be able to: - Create photo realistic images using the Photo Studio workbench - Create and apply stickers to your models - Create animations using different techniques

Participants' ProfileIndustrial Stylists and Designers


Content- Introduction- Environment management- Camera management- Light sources management- Shooting management- Textures management- Stickers management- Animation: Turntable management- Animation: Animating scene elements- Catalogs

ExercisesEx. 1: Phone Handset (150min) / Fabrication & Assemblies Consumer Goods



PRO: CATIA Tools for Proficient Users

EDU-CAT-E-PRO-FCourse Code EDU-CAT-E-PRO-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PRO-FI-V5R19 Foils: EDU-CAT-E-PRO-FF-V5R19

ObjectivesUpon completion of this course you will be able to:-Create and reuse advanced replication tools like Power Copies-Store components and Power copies into catalog and reuse them in a newcontext-Analyze and convert CATIA V4 models to CATIA V5

Participants' ProfileAdvanced Users

PrerequisitesStudents attending this course should have knowledge of CATIA BASICS andPart Design

ContentThis course will teach you how to use advanced CATIA tools to re-use existingCATIA V4 and CATIA V5 model data. You will learn how to make use ofcomponent catalogs, and how to store and create re-usable parameterizedfeatures.

- Creating and Using Power Copy- Creating Catalogs of Components- From CATIA V4 to V5 Basics- Course Summary

ExercisesNone



PSO: Photo Studio Optimizer

EDU-CAT-E-PSO-FCourse Code EDU-CAT-E-PSO-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PSO-FI-V5R19 Foils: EDU-CAT-E-PSO-FF-V5R19

ObjectivesUpon completion of this course you will be able to use the various Photo StudioOptimizer tools to enhance the quality of your photo realistic images.


PrerequisitesCATIA V5 FundamentalsCATIA Photo Studio

Content- 3D textures- Bump mapping- Global illumination- Caustics- Visual effects

ExercisesNone



RTR: Real Time Rendering

EDU-CAT-E-RTR-FCourse Code EDU-CAT-E-RTR-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-RTR-FI-V5R19 Foils: EDU-CAT-E-RTR-FF-V5R19 Exercises: EDU-CAT-E-RTR-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Create the required environment around a model - Apply materials, textures, and 3D textures to your models - Use different types of lights and cameras to create the desired ambience



Content- Introduction- Environment management- Camera management- Light sources management- DMU integration- Textures management- Stickers management- Animation: Turntable management- Animation: Animating scene elements

ExercisesEx. 1: Defining an Environment (5min) / AutomotiveEx. 2: Defining the Camera (10min) / All sectorsEx. 3: Defining the Light Source (10min) / AutomotiveEx. 4: Applying Texture (40min) / AutomotiveEx. 5: Applying Stickers (10min) / AutomotiveEx. 6: Creating an Animation Using a Turntable (15min) / AutomotiveEx. 7: Creating an Animation of Scene (15min) / Automotive



V4A: V4/V5 Advanced Interoperability

EDU-CAT-E-V4A-ACourse Code EDU-CAT-E-V4A-ACATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V4A-AI-V5R19 Foils: EDU-CAT-E-V4A-AF-V5R19 Exercises: EDU-CAT-E-V4A-AX-V5R19

ObjectivesIn this course, you will learn advanced interoperability concepts about themigration of CATIA V4 geometric/application data to CATIA V5. You will alsolearn how V5 data can be saved in CATIA V4 formats or used directly in CATIAV4.

Participants' ProfileExperienced CATIA V4/V5 users

PrerequisitesBasic knowledge of CATIA V5 Mechanical Design Solutions

Content- From V4 to V5 - Transfer of V4 geometric data to V5 - Transfer of V4 application data to V5- From V5 to V4 - Using V5 data in V4 - Saving V5 data in V4 formats

ExercisesEx. 1: Smart/Unsmart Solid (15min) / All sectorsEx. 2: Error during update (15min) / All sectorsEx. 3: Migration of kinematics data (25min) / All sectorsEx. 4: Sheet Metal Design (10min) / All sectors



V4I: V4 Integration

EDU-CAT-E-V4I-FCourse Code EDU-CAT-E-V4I-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V4I-FI-V5R19 Foils: EDU-CAT-E-V4I-FF-V5R19 Exercises: EDU-CAT-E-V4I-FX-V5R19 Detailed Steps: EDU-CAT-E-V4I-FS-V5R19

ObjectivesAt the end of this course, participants will be able to:- Use CATIA V4 data in CATIA V5- Transfer a CATIA V4 solid into a CATIA V5 CATPart- Manage the links between CATIA V4 and CATIA V5 documents

Participants' ProfileCATIA V5 users

PrerequisitesBasic knowledge of CATIA V5 Mechanical Design Solutions

Content- Introduction to V4 Integration- Creating a CATProduct using V4 data- Assembly of V4 data in a V5 CATProduct- Transferring V4 data into V5 CATPart- Design in context- Drawing of a V4/V5 document in V5- Migration of 2D Draw elements and Views- CATIA V5 DMU solutions and V4 data- Links between V4 data and V5 documents

ExercisesEx. 1: Recap Exercise 1 : open and check the V4 geometry (20min) / AllsectorsEx. 2: Recap Exercise 2 : Solid translation (15min) / All sectorsEx. 3: Recap Exercise 3 : manipulations in a CATProduct (20min) / All sectorsEx. 4: Welding Gun : Creating a CATProduct with V4 data (10min) / All sectorsEx. 5: Welding Gun : Assembly of V4 data in a V5 CATProduct (15min) / AllsectorsEx. 6: Welding Gun : Copy/Pasting a V4 solid in a V5 CATPart (20min) / AllsectorsEx. 7: Welding Gun : Design in context (20min) / All sectorsEx. 8: Welding Gun : Generative drafting (20min) / All sectorsEx. 9: Welding Gun : DMU Space Analysis (20min) / All sectorsEx. 10: Welding Gun : V4 Modification and Update in V5 (20min) / All sectors



VBA: CATIA V5 Automation

EDU-CAT-E-VBA-FCourse Code EDU-CAT-E-VBA-FCATIA V5R19Brand & Release CATIA V5R194 daysDuration 4 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-VBA-FI-V5R19 Foils: EDU-CAT-E-VBA-FF-V5R19 Exercises: EDU-CAT-E-VBA-FX-V5R19

ObjectivesAt the end of this course, participants will have a good understanding of thedifferent ways to automate tasks related to CATIA V5: CATIA Macros andVisual Basic Programming.

Participants' ProfileCATIA V5 Applications developers; bench markers

PrerequisitesCATIA V5 Fundamentals.Visual Basic Editor on PC NTMinimum knowledge or exposure to Microsoft Visual Basic (cf. book ref.Microsoft Visual Basic 6.0 Learning Edition)JavaScript is a plus

Content- CATIA V5 OLE Automation, Journaling & Scripting Architecture- Exported objects of CATIA V5- Designing panels for Macros- Graphic selection of objects- Settings - V5 Administration - Communication with another Automation server.

ExercisesEx. 1: Cylinders (Master Exercise) (10min) / All sectorsEx. 2: Modifying the viewpoint of an existing document (30min) / All sectorsEx. 3: Creating 2D sketch with constraints (15min) / All sectorsEx. 4: Creating part design features (30min) / All sectorsEx. 5: Creating 3D wireframes and 3D surfaces (30min) / All sectorsEx. 6: Titanic (30min) / All sectorsEx. 7: Drafting the bolt (30min) / All sectorsEx. 8: Test Selections (30min) / All sectorsEx. 9: Select Element (30min) / All sectorsEx. 10: Get Point (30min) / All sectorsEx. 11: Settings - Applying local changes (20min) / All sectors



Mechanical Design Solutions


Mechanical DesignSolutions

ASL: Aerospace Sheet Metal Design

EDU-CAT-E-ASL-FCourse Code EDU-CAT-E-ASL-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ASL-FI-V5R19 Foils: EDU-CAT-E-ASL-FF-V5R19 Exercises: EDU-CAT-E-ASL-FX-V5R19 Detailed Steps: EDU-CAT-E-ASL-FS-V5R19

ObjectivesIn this course, you will learn how to generate sheet metal parts for aerospace

Participants' ProfileAerospace Airframe Designer

PrerequisitesPart Design, Assembly Design, Wireframe and Surface Design

Content- Introduction to Aerospace Sheet Metal Design- ASL Parameters- Creating the Web- Creating a Surfacic Flange- Creating a Joggle- Creating Flanges- Creating a Corner Relief - Creating a Cut Out- Creating Stamps - Flanged Hole - Bead - Circular Stamp - Surface Stamp - Flanged Cutout - Stiffening Rib - Curve Stamp - User Stamp- Creating a Hole- Points or Curves Mapping- Creating Corners or Chamfers- Applying a Pattern- Modifying a Feature- Generating Folded and Flattened Parts- Drawing Generation

ExercisesEx. 1: Fighter Airframe (50min) / All sectorsEx. 2: Aero Structure (30min) / All sectorsEx. 3: Bracket (15min) / All sectorsEx. 4: Fighter Web Structure (20min) / All sectorsEx. 5: Rib (20min) / All sectors



ASM: CATIA Product Design

EDU-CAT-E-ASM-FCourse Code EDU-CAT-E-ASM-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ASM-FI-V5R19 Foils: EDU-CAT-E-ASM-FF-V5R19 Exercises: EDU-CAT-E-ASM-FX-V5R19 Detailed Steps: EDU-CAT-E-ASM-FS-V5R19

ObjectivesCreate a new product and add componentsMove components within a product by positioning them with assemblyconstraintsModify an existing product structureDesign new parts in context of the productCheck mechanical properties and analyze degrees of freedomPerform interference checking and measurements


PrerequisitesCATIA Part Design

ContentThis course will teach you how to create a simple product structure, and how toadd existing components and position them correctly. You will learn how to add new parts and design them in the context of aproduct, and how to perform analyses to ensure design coherence.

- Introduction to Assembly Design- Creating Products- Positioning Components Using Constraints- Introduction to Design in Context

ExercisesEx. 1: Elliptical Sport Trainer (60min) / All sectorsEx. 2: Creating Products (20min) / All sectorsEx. 3: Positioning Components (10min) / All sectorsEx. 4: Shock Absorber Piston (30min) / All sectorsEx. 5: Connector Assembly (90min) / All sectors



ASM: CATIA Product Design Expert

EDU-CAT-E-ASM-ACourse Code EDU-CAT-E-ASM-ACATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ASM-AI-V5R19 Foils: EDU-CAT-E-ASM-AF-V5R19 Exercises: EDU-CAT-E-ASM-AX-V5R19

ObjectivesUpon completion of this course, you will be able to:-Modify CATIA options in order to optimize performance for large, complexdesigns-Manage contextual links between product documents by using publications-create and use parameters to drive a product designCreate sections to visualize internal product structure-Create scenes and explodes views-Generate annotations and bills of material for assembly drawings


PrerequisitesStudents attending this course should have the knowledge of CATIA ProductDesign, CATIA Part Design.

ContentThis course will teach you collaborative engineering methods with which youcan design parts in the context of a complex product structure. You will learnhow to optimize performance for large and complex designs, and how togenerate annotations and bills of material for assembly drawings.

- Managing a Product Structure- Designing & Managing Contextual Parts- Creating and Using Published Geometry- Flexible Sub-Assembly- Working with Large Assemblies- Analyzing Assemblies to Prepare drawing

ExercisesEx. 1: Connector Assembly (90min) / All sectorsEx. 2: Vice Assembly (70min) / All sectorsEx. 3: Flexible Assemblies (25min) / All sectorsEx. 4: PC Speaker Assembly (90min) / All sectors



CCV: Core & Cavity Design

EDU-CAT-E-CCV-FCourse Code EDU-CAT-E-CCV-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-CAT-E-CCV-FF-V5R19 Exercises: EDU-CAT-E-CCV-FX-V5R19

ObjectivesUpon completion of the course you will be able to: - Import the part to a mold - Define the main pulling direction - Update mold areas by transferring, splitting and segregating faces - Create a parting surface - Use functionalities dedicated to stamping - Perform a geometric comparison of two parts

Participants' ProfileSurface designers in tooling domain

PrerequisitesV5F-F: CATIA V5 Fundamentals

Content- Import the Part to mold- Define the Main Pulling Direction- Define a Slider/Lifter Pulling Direction- Work on Mold Areas : Transfer, Aggregate, Split, Explode, Bounding Box- Define Parting Surface

ExercisesEx. 1: Pan Handle (60min) / All sectorsEx. 2: Support (30min) / All sectors



CPD: Composites Part Design

EDU-CAT-E-CPD-FCourse Code EDU-CAT-E-CPD-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CPD-FI-V5R19 Foils: EDU-CAT-E-CPD-FF-V5R19 Exercises: EDU-CAT-E-CPD-FX-V5R19

ObjectivesIn this course you will learn how to cover the engineering to manufacturingdesign process of high quality composite parts

Participants' ProfileComposite Material Designers and Engineers

PrerequisitesPart Design, Assembly Design, Wireframe and Surface Design, Drafting


Content- CPD Workbench Presentation - Composites Catalog - Laminate Parameters - Zone Based Design- Group of Zones - Zones Parameters - Transition Zones - Connection Generator - Impose Thickness Point - Import Laminate - Solid and Top Surface from Zones - Numerical Analysis from Zones- Stack-up file from Zones - Plies Creation From Zones - Limit Contour - Import Staggering Data File - Plies Group - Manual Plies Creation - Core - Ply Exploder - 3D Sections- On the Fly Composites Information- Check Contours- Numerical Analysis - Core Sample - Managing the Part - Symmetry Creation - Ply Table - Import Ply Table - Edge Of Part - Solids from Plies - IML from Plies - Drawing - 3D Annotations- Manufacturing Data Structure - Manufacturing Surface Swapping - Material Excess - Producibility Analysis- Inspection Tool - Darts - Flattening - Stacking Unfold- Geometry Transfer - Multi Splice Creation - Butt Splice / No Splice - Synchronization- Mirror Part - Ply Export - Ply-book - V4-V5 Composites Interoperability - Composites Options


ExercisesEx. 1: Composites Catalog Definition (20min) / All sectorsEx. 2: Preliminary Design with Stagger (30min) / All sectorsEx. 3: Zones & Transition Zone Bridge (20min) / All sectorsEx. 4: Panel Analysis and ITPs definition (20min) / All sectorsEx. 5: Door Panel Taper Refinement (40min) / All sectorsEx. 6: Preliminary Fuselage design (20min) / All sectorsEx. 7: Plies from Panel Zones definition (20min) / All sectorsEx. 8: Panel Manual Staggering (40min) / All sectorsEx. 9: Importing Staggering data file on a Panel (20min) / All sectorsEx. 10: Manual Plies definition on a Wing (20min) / All sectorsEx. 11: Fairing Insert Management (30min) / All sectorsEx. 12: Wing Analysis and Mofdifications (30min) / All sectorsEx. 13: Symmetry pivot on carter (30min) / All sectorsEx. 14: Solid & IML from fuselage plies (30min) / All sectorsEx. 15: 3D Annotations and Drawing definition ( (40min) / All sectorsEx. 16: Panel Engineering Design (100min) / All sectorsEx. 17: Manufacturing Skin Swapping (10min) / All sectorsEx. 18: Sandwich Panel Design (30min) / All sectorsEx. 19: Material Excess on a Panel (20min) / All sectorsEx. 20: Producibility and Flattening (30min) / All sectorsEx. 21: Producibility Analysis and Darts (25min) / All sectorsEx. 22: Producibility Analysis with Deviation (20min) / All sectorsEx. 23: Butt Splice / No Splice (20min) / All sectorsEx. 24: 2D 3D geometry transfer (20min) / All sectorsEx. 25: 3D 2D geometry transfer (25min) / All sectorsEx. 26: Door Pane (25min) / All sectorsEx. 27: Synchronizing Parts (40min) / All sectorsEx. 28: Mirroring a Part (15min) / All sectorsEx. 29: Manufacturing Export (25min) / All sectorsEx. 30: Ply Bok Definition (15min) / All sectorsEx. 31: V4-V5 Composites Migration (15min) / All sectorsEx. 32: Panel Manufacturing Design (90min) / All sectorsEx. 33: Complete Composites Part (150min) / All sectors



CPE: Composites Part Engineering

EDU-CAT-E-CPE-FCourse Code EDU-CAT-E-CPE-FCATIA V5R19Brand & Release CATIA V5R193 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CPE-FI-V5R19 Foils: EDU-CAT-E-CPE-FF-V5R19 Exercises: EDU-CAT-E-CPE-FX-V5R19

ObjectivesIn this course you will learn how to generate composite parts from thePreliminary Design to the Engineering Detail Design

Participants' ProfileComposites Parts Designer

PrerequisitesPart Design, Assembly Design, Wireframe and Surface Design Drafting


Content- CPE Workbench Presentation - Composites Catalog - Laminate Parameters- Zone Based Design - Group of Zones - Zones Parameters - Transition Zones - Connection Generator - Impose Thickness Point - Import Laminate - Solid and Top Surface from Zones - Numerical Analysis from Zones- Stack-up file from Zones - Plies Creation From Zones - Limit Contour - Import Staggering data file - Plies Group - Manual Plies Creation- Core - Ply Exploder - 3D Sections- On the Fly Composites Information- Check Contours- Numerical Analysis - Core Sampling Analysis - Managing the Part - Symmetry Creation - Ply Table - Import Ply Table - Edge Of Part - Solid from plies - IML from plies - Multi Splice Creation - Butt Splice – No Splice- Producibility Analysis - Inspection tool - Darts - Mirrored Part- Drawing - 3D Annotations- Ply Export- Ply Book- V4-V5 Composites Interoperability- Composites Options


ExercisesEx. 1: Composites Catalog Definition (20min) / All sectorsEx. 2: Preliminary Design with Stagger (30min) / All sectorsEx. 3: Zones & Transition Zone Bridge (20min) / All sectorsEx. 4: Panel Analysis and ITPs definition (20min) / All sectorsEx. 5: Door Panel Taper Refinement (40min) / All sectorsEx. 6: Preliminary Fuselage Design (20min) / All sectorsEx. 7: Plies from Panel Zones definition (20min) / All sectorsEx. 8: Panel Manual Staggering (40min) / All sectorsEx. 9: Importing Staggering data file on a Panel (20min) / All sectorsEx. 10: Manual Plies definition on a Wing (30min) / All sectorsEx. 11: Fairing Insert Management (30min) / All sectorsEx. 12: Wing Analysis and modification (30min) / All sectorsEx. 13: Symmetry pivot on carter (30min) / All sectorsEx. 14: Solid & IML from fuselage plies (30min) / All sectorsEx. 15: Butt Splice / No Splice Zones (20min) / All sectorsEx. 16: Producibility Analysis and Darts (30min) / All sectorsEx. 17: Producibility Analysis with Deviation (20min) / All sectorsEx. 18: Mirroring a Part (15min) / All sectorsEx. 19: 3D Annotations and Drawing definition (40min) / All sectorsEx. 20: Engineering Composites Data Export (10min) / All sectorsEx. 21: V4-V5 Composites Migration (15min) / All sectorsEx. 22: Ply Book Definition (15min) / All sectorsEx. 23: Panel Engineering Design (100min) / All sectors



CPM: Composites Part Manufacturing

EDU-CAT-E-CPM-FCourse Code EDU-CAT-E-CPM-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CPM-FI-V5R19 Foils: EDU-CAT-E-CPM-FF-V5R19 Exercises: EDU-CAT-E-CPM-FX-V5R19

ObjectivesIn this course you will learn how to manufacture composites parts.

Participants' ProfileComposites Parts manufacturing Designer

PrerequisitesPart Design,Assembly Design,Wireframe and Surface Design Drafting

Content- CPM Workbench Presentation - Composites Catalog - Laminate Parameters - Manufacturing Data Structure - Manufacturing Surface Swapping - Plies Group - Manual Plies Creation - Core - Edge Of Part - Material Excess - Ply Exploder - 3D Sections- On the Fly Composites Information- Managing the Part - Ply Table - Numerical Analysis - Multi Splice Creation - Butt Splice - No Splice- Producibility Analysis - Inspection tool - Darts - Flattening - Stacking Unfold- Geometry transfer - Synchronization - Mirrored Part- Ply Export- Ply Book- Composites Options


ExercisesEx. 1: Composites Catalog Definition (20min) / All sectorsEx. 2: Manufacturing Skin Swapping (10min) / All sectorsEx. 3: Material Link (20min) / All sectorsEx. 4: Manual Plies definition on a Wing (20min) / All sectorsEx. 5: Fairing Insert Management (20min) / All sectorsEx. 6: Material Excess on a Panel (20min) / All sectorsEx. 7: Composites Part Analysis (20min) / All sectorsEx. 8: Butt Splice / No Splice Zones (20min) / All sectorsEx. 9: Producibility and Flattening (30min) / All sectorsEx. 10: Producibility Analysis and Darts (20min) / All sectorsEx. 11: Producibility Analysis with Deviation (20min) / All sectorsEx. 12: 2D 3D transfer (20min) / All sectorsEx. 13: 3D 2D geometry transfer (25min) / All sectorsEx. 14: Door Panel (25min) / All sectorsEx. 15: Synchronizing Parts (40min) / All sectorsEx. 16: Mirroring a Part (15min) / All sectorsEx. 17: Manufacturing Export (25min) / All sectorsEx. 18: Ply Book Definition (15min) / All sectorsEx. 19: Panel Manufacturing Design (90min) / All sectors



CTP: CATIA PLM Express Fundamentals

EDU-CAT-E-CTP-FCourse Code EDU-CAT-E-CTP-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CTP-FI-V5R19 Foils: EDU-CAT-E-CTP-FF-V5R19

Objectives- Understand the CATIA V5 interface- Plan the construction of a part in order to properly convey its visual andfunctional aspects- Create simple parts in CATIA V5- Understand how to manage parts in the context of an assembly- Produce simple drawings and assembly layouts

Participants' ProfileNew CATIA V5 Mechanical Designers

PrerequisitesMechanical designExperience with the Windows operating system.

ContentThis course will introduce you to CATIA V5. It will teach you how to buildsimple parts and assemblies in CATIA, and how to make simple drawings ofthose parts and assemblies.

- Lesson 1: Introduction to CATIA- Lesson 2: Profile Creation

- Lesson 3: Basic Features

- Lesson 4: Additional Features

- Lesson 5: Dress-Up Features

- Lesson 6: Reusing Data

- Lesson 7: Finalizing Design Intent

- Lesson 8: Assembly Design

- Lesson 9: Design in Context

- Lesson 10: Drafting ISO

- Lesson 11: Instant Collaboration


ExercisesEx. 1: Key Terms & Design Intent Exercise: 1A (20min) / All sectorsEx. 2: Getting Started with CATIA Exercise: 1B (20min) / All sectorsEx. 3: Case Study: Drill Press Master Project (20min) / All sectorsEx. 4: Create New Part Exercise: 2A, 2B, 2C (40min) / All sectorsEx. 5: Constraining a Sketch Exercise: 2D, 2E, 2F (40min) / All sectorsEx. 6: Case Study: Support Plate (15min) / All sectorsEx. 7: Creating with Basic Features Exercise: 3A, 3B, 3C (40min) / All sectorsEx. 8: Part Investigation Exercise: 3D, 3E (20min) / All sectorsEx. 9: Case Study: Engine Support (20min) / All sectorsEx. 10: Create with Additional Features Exercise: 4A, 4B, 4C (45min) / AllsectorsEx. 11: Create Revolved Features Exercise: 4D, 4E, 4F (45min) / All sectorsEx. 12: Create Shell and Thin Features Exercise: 4G, 4H, 4I (50min) / AllsectorsEx. 13: Case Study: Handle Block (20min) / All sectorsEx. 14: Create Dress-up Features Exercise: 5A, 5B, 5C (50min) / All sectorsEx. 15: Editing Features Exercise: 5D, 5E, 5F (50min) / All sectorsEx. 16: Case Study: Casing Support (25min) / All sectorsEx. 17: Reusing Data Exercise: 6A, 6B, 6C (50min) / All sectorsEx. 18: Reusing Data Part 2 Exercise: 6D, 6E, 6F (50min) / All sectorsEx. 19: Case Study: Engine (35min) / All sectorsEx. 20: Finalizing Design Intent Exercise: 7A, 7B, 7C, 7D, 7E (80min) / AllsectorsEx. 21: Case Study: Table (35min) / All sectorsEx. 22: Introduction to Assembly Design Exercise: 8A, 8B, 8C (50min) / AllsectorsEx. 23: Adding Assembly Design Components Exercise: 8D, 8E, 8F (60min) /All sectorsEx. 24: Case Study: Handle Mechanism (35min) / All sectorsEx. 25: Design in Context Exercise: 9A, 9B, 9C, 9D, 9E (120min) / All sectorsEx. 26: Case Study: Chuck (30min) / All sectorsEx. 27: Creating the Drawing Exercise: 10A, 10B, 10C (30min) / All sectorsEx. 28: Case Study: Base (20min) / All sectorsEx. 29: Master Project: Part Creation (60min) / All sectorsEx. 30: Master Project: Finalize the Part (45min) / All sectorsEx. 31: Master Project: Create an Assembly (60min) / All sectorsEx. 32: Master Project: Edit a Part (40min) / All sectorsEx. 33: Master Project: Create a Drawing (20min) / All sectors



CTPB: CATIA PLM Express Foundations-BasicSurfaces

EDU-CAT-E-CTPB-FCourse Code EDU-CAT-E-CTPB-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CTPB-FI-V5R19 Foils: EDU-CAT-E-CTPB-FF-V5R19

Objectives- Understand the CATIA V5 interface- Plan the construction of a part in order to properly convey its visual andfunctional aspects- Create simple parts in CATIA V5- Understand how to manage parts in the context of an assembly- Produce simple drawings and assembly layouts- Introduction to surfaces


PrerequisitesMechanical design experience.Experience with the Windows operating system.






- Lesson 6: Wireframe and Surface Design







What is new in this releaseNow a Companion course



CTPS: CATIA PLM Express Foundations-Surfaces

EDU-CAT-E-CTPS-FCourse Code EDU-CAT-E-CTPS-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CTPS-FI-V5R19 Foils: EDU-CAT-E-CTPS-FF-V5R19

Objectives- Understand the CATIA V5 interface- Plan the construction of a part in order to properly convey its visual andfunctional aspects- Create simple parts in CATIA V5- Understand how to manage parts in the context of an assembly- Produce simple drawings and assembly layouts- Introduction to surfaces with the GSD workbench








- Lesson 6: Surface Design







What is new in this releaseNow a Companion course



DDR: CATIA Detail Drafting

EDU-CAT-E-DDR-FCourse Code EDU-CAT-E-DDR-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-DDR-FI-V5R19 Foils: EDU-CAT-E-DDR-FF-V5R19 Exercises: EDU-CAT-E-DDR-FX-V5R19

ObjectivesUpon completion of this course, you will be able to:-Create an interactive view and draw a sketch on it-Insert annotations to dress-up the views-Use advanced dimensioning toolsYou will also be introduced to the 2D-3D links management and to the draftingworkbench customization

Participants' ProfileDraftsmen

PrerequisitesStudents attending this course should be familiar with the basics of 2D viewscreation in CATIA V5

Content- Introduction to drafting workbench- Creating Interactive Views- Dressing up the Layout- View and Sheet Management- Customizing the Drafting Workbench- Master Exercise

What is new in this releaseThis course has been reworked to focus on the interactive creation and dressup of views. It includes useful recommendations and introduces to the use of2D components from catalogs.

ExercisesEx. 1: Adding Drawing Views (45min) / All sectorsEx. 2: Adding Annotations (30min) / All sectorsEx. 3: Editing View Properties and Layouts (45min) / All sectorsEx. 4: Master Exercise: Detail Drawing of Bracket (60min) / All sectors



DRA: Advanced Drafting & Customization

EDU-CAT-E-DRA-ACourse Code EDU-CAT-E-DRA-ACATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-DRA-AI-V5R19 Foils: EDU-CAT-E-DRA-AF-V5R19 Exercises: EDU-CAT-E-DRA-AX-V5R19

ObjectivesUpon completion of this course you will be able to set and manage alldimension and annotation standards contained in the standard files accordingto company or projects needs.

Participants' ProfileDraftsmen, Drafting Administrators

PrerequisitesCATIA V5 Mechanical Design Fundamentals, knowledge of VB scripting

ContentDuring this 2-day session you will see -Hints & Tips on Interactive Drafting-Hints & Tips on Generative Drafting-Drawing Generation of large assemblies-Administration tasks-Increasing Productivity-Creating Frames & Title Blocks with a macro

ExercisesEx. 1: The Plate (45min) / All sectorsEx. 2: The Pivot (45min) / All sectorsEx. 3: Generating dimensions (25min) / All sectorsEx. 4: Using filtering techniques (25min) / All sectorsEx. 5: Geometry & Free Text in VBScript (15min) / All sectorsEx. 6: Filling in Title Blocks (20min) / All sectors



FMP: Functional Molded Part

EDU-CAT-E-FMP-FCourse Code EDU-CAT-E-FMP-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-FMP-FI-V5R19 Foils: EDU-CAT-E-FMP-FF-V5R19 Exercises: EDU-CAT-E-FMP-FX-V5R19

ObjectivesUpon Completion of this course you will be able to:- Define the main shapes of a molded part as added or removed material- Add functional features such as ribs or cutouts to the part- Finalize the molded part using the feature modifiers such as fillets or patterns- Use the multi-body approach- Extract cores and cavities from the final part

Participants' ProfileMold Designers

PrerequisitesStudents attending this course should be familiar with CATIA V5Fundamentals.

ContentThis course will teach you how to use the Functional Molded Part workbench tocreate molded parts from the main shapes definition and to finalize the partwith additional dress up features. You will also be taught the multi-bodyapproach and will finally learn how to extract cores and cavity from the finalpart.

- Basics of functional Molded Parts- Basic Features- Functional Features- Feature Modifiers and Dress-Up Tools- Multi-Body Features- Extraction Features

ExercisesEx. 1: Color Pallet (15min) / All sectorsEx. 2: Front Cover (20min) / All sectorsEx. 3: Bottle (20min) / All sectorsEx. 4: Master Exercise: Locking Cover (45min) / All sectorsEx. 5: Belt Housing (30min) / All sectorsEx. 6: Master Exercise: Electrical Box Housing (45min) / All sectorsEx. 7: Notepad (30min) / All sectorsEx. 8: Functional Mold Extraction (25min) / All sectorsEx. 9: Mold design: Electrical Housing (20min) / All sectors



FR1: Part Design Feature Recognition

EDU-CAT-E-FR1-FCourse Code EDU-CAT-E-FR1-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-FR1-FI-V5R19 Foils: EDU-CAT-E-FR1-FF-V5R19 Exercises: EDU-CAT-E-FR1-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Build comprehensive V5 data structures for solids whose specifications arelost or unreachable - Build data structure for solids that have been imported from other CADsystems


PrerequisitesStudents attending this course should have knowledge of CATIA V5Fundamentals and CATIA Part Design.

ContentFeature Recognition: IntroductionPerforming Feature RecognitionMaster ExerciseTo Sum Up

ExercisesEx. 1: Creating V5 geometry from an isolated solid (30min) / All sectors



FTA: 3D Functional Tolerancing & Annotation

EDU-CAT-E-FTA-FCourse Code EDU-CAT-E-FTA-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-FTA-FI-V5R19 Foils: EDU-CAT-E-FTA-FF-V5R19 Exercises: EDU-CAT-E-FTA-FX-V5R19

ObjectivesUpon Completion of this course you will be able to:- Add 3D annotations to a part- Manage and position these annotations- Create and manage annotation planes and views- Manage the 3D geometry associated to the 3D annotations


PrerequisitesStudents attending this course should be familiar with the basics of solids andsurfaces creation and also with the basics of knowledge

ContentThis course will teach you how to create annotation planes in a CATPart andhow to add and manage 3D annotations on these planes. You will also learnhow to create 3D views in the CATPart and how to use them to create 2Dviews in a CATDrawing.

ExercisesEx. 1: Create and Manage 3D Annotations (65min) / All sectorsEx. 2: Create Drawings & Manage Annotations (80min) / All sectorsEx. 3: Create Assembly Annotations (25min) / All sectorsEx. 4: Modify Geometry & Update Annotations (85min) / All sectorsEx. 5: Advanced FT&A Functions (55min) / All sectorsEx. 6: Knowledge and 3D Annotations (45min) / All sectors



GDRA: CATIA Generative Drafting (ANSI)

EDU-CAT-E-GDRA-FCourse Code EDU-CAT-E-GDRA-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course introduces you to the drafting workbench of CATIA V5 and you willfamiliarize yourself with the user interface. You will learn how to produce adrawing by creating projection and section views from a 3D model and byadding basic dimensions.

Upon completion of this course you will be able to:- Access the Drafting workbench tools - Create views from 3D part and product data- Add dimensions to the views- Manage views update and modifications- Finalize the sheet by adding a title block


Content- Introduction to drafting workbench- Basic generative views creation- Additionnal views creation- Views modifications- Views dimensioning

What is new in this releaseCourse reorganized and including useful recommendations

ExercisesEx. 1: Master Exercise 1: Connector Housing (180min) / All sectorsEx. 2: Master Exercise 2: Assembly Drawing of Drill Machine (60min) / Allsectors



GDRI: CATIA Generative Drafting (ISO)

EDU-CAT-E-GDRI-FCourse Code EDU-CAT-E-GDRI-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-GDRI-FI-V5R19 Foils: EDU-CAT-E-GDRI-FF-V5R19 Exercises: EDU-CAT-E-GDRI-FX-V5R19 Detailed Steps: EDU-CAT-E-GDRI-FS-V5R19

ObjectivesThis course introduces you to the drafting workbench of CATIA V5 and you willfamiliarize yourself with the user interface. You will learn how to produce adrawing by creating projection and section views from a 3D model and byadding basic dimensions.

Upon completion of this course you will be able to:- Access the Drafting workbench tools - Create views from 3D part and product data- Add dimensions to the views- Manage views update and modifications- Finalize the sheet by adding a title block


Content- Introduction to drafting- Basic generative views creation- Additional views creation- Views modifications- Views dimensioning- Views modifications

What is new in this releaseCourse reorganized and including useful recommendations.

ExercisesEx. 1: Master Exercise 1: Connector Housing (180min) / All sectorsEx. 2: Master Exercise 2: Assembly Drawing of Drill Machine (60min) / Allsectors



GS1: CATIA Surface Design

EDU-CAT-E-GS1-FCourse Code EDU-CAT-E-GS1-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesExercises: EDU-CAT-E-GS1-FX-V5R19 Foils: EDU-CAT-E-GS1-FF-V5R19 Exercises: EDU-CAT-E-GS1-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Identify and use the tools specific to the Generative Shape Design workbench- Create simple reference and Wireframe geometry- Use the reference wireframe elements to create simple surfaces- Create clean topology from a set of surfaces and smooth sharp edges- Detect and correct the discontinuities on curves and surfaces- Create solids from surfaces

Participants' ProfileMechanical Surface Designers

PrerequisitesStudents attending this course should be familiar with the CATIA V5 interface

ContentThis course introduces you to the Generative Shape Design interface andbasic tools. You will be taught wireframe and surface creation and you will familiarizeyourself with the hybrid design. This course focus on the Generative Shape Design tools that are available witha MD2 license.

- Introduction to Surface Design- Creating Wireframe Geometry- Shape Design Common Tools- Creating Surfaces- Performing Operations on the Geometry- Completing the Geometry in Part Design- Modifying the Geometry- Using Tools-Master Exercice: Mobile Phone

ExercisesEx. 1: Creating Wireframe Geometry (25min) / All sectorsEx. 2: Creating Basic Surfaces (20min) / All sectorsEx. 3: Operations on Geometry (40min) / All sectorsEx. 4: Performing Operations on Geometry (30min) / All sectorsEx. 5: Completing the Solid in Part Design (40min) / All sectorsEx. 6: Modifying the Geometry (20min) / All sectorsEx. 7: Using Tools (10min) / All sectorsEx. 8: Master Exercise: Mobile Phone (65min) / All sectors



HA1: Healing Assistant

EDU-CAT-E-HA1-FCourse Code EDU-CAT-E-HA1-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-HA1-FI-V5R19 Foils: EDU-CAT-E-HA1-FF-V5R19 Exercises: EDU-CAT-E-HA1-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Analyze the imported data - Repair the imported data - Compare two versions of a Part - Customize the workbench

Participants' ProfileAll designers, especially in the tooling design domain

PrerequisitesGS1-F-V5R16: CATIA Surface Design

Content - Introduction to Healing Assistant - Master Exercise Presentation - Model Analysis - Master Exercise Step 1: Topological Analysis - Closing a Join Surface - Master Exercise Step 2: Topological Healing - Comparing Models - Customizing the Workbench

ExercisesEx. 1: Lateral Fender (master exercise) (60min) / All sectorsEx. 2: Compare exercise: Lateral fender (30min) / All sectorsEx. 3: Additional exercise (Handle) (45min) / All sectors



LO1: 2D Layout for 3D Design

EDU-CAT-E-LO1-FCourse Code EDU-CAT-E-LO1-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-LO1-FI-V5R19 Foils: EDU-CAT-E-LO1-FF-V5R19 Exercises: EDU-CAT-E-LO1-FX-V5R19

ObjectivesIn this course you will learn how to draw benefit from 2D & 3D available in asingle environment to design 3D products.


PrerequisitesDraftingPart DesignAssembly Design

Content1- Introduction Accessing the Workbench User Interface General Presentation User Settings Standards2- Geometry Creation Creating Projection Views Exporting the 2D View to 2D Layout Using 2D Components 3D Visualization and Use-Edges Capabilities Managing the Background Visualization Dressing-up the Geometry Creating 3D geometry from 2D geometry3- Data Management Print Capabilities Drawing Creation from 2D Layout

ExercisesEx. 1: Front Fork (40min) / All sectorsEx. 2: Front Rear Sprocket (20min) / All sectorsEx. 3: Front Fork (20min) / All sectorsEx. 4: Engine Assembly (85min) / All sectorsEx. 5: Tyre Assembly (60min) / All sectors



MD2: Mechanical Design V5R19 Update

EDU-CAT-E-MD2-UCourse Code EDU-CAT-E-MD2-UCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishUpdateLevel UpdateCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-MD2-UI-V5R19 Foils: EDU-CAT-E-MD2-UF-V5R19

ObjectivesUpon completion of this course you will be able to use the new and enhancedtools of the Mechanical Design Workbenches in V5R19 Release.


PrerequisitesStudents attending this course should have knowledge of CATIA MechanicalDesign V5R18

ContentSketcher Updates- What is New in CATIA Sketcher Workbench- New command Upgrade- New command Explode- Enhancement in Positioning As Result With Link SketchesPart Design Updates- What is New in CATIA Part Design Workbench- Enhancement in the Edge Fillet- Recap Exercise Edge Fillet with Blend Corner- Enhancement in the Hole Definition- Other EnhancementsAssembly Design Updates- What is New in CATIA Assembly Design Workbench- New Command Associativity- New Command Add to Associated Part- Recap Exercise Associativity and Add to Associated Part- Enhancement in the Constraint CreationGenerative Shape Design Updates- What is New in Generative Shape Design Workbench- Enhancement in the Sweep- Enhancement in Points and Planes Repetition- Enhancement in the Planes BetweenDrafting Updates- Whats New in CATIA Drafting Workbench- New Command Advanced Bill of Material- Enhancement in Rigid position Links- Enhancement in Broken Constraints Visualization- Enhancement in 3D Clipping

ExercisesEx. 1: Edge Fillet with Blend Corner (10min) / All sectorsEx. 2: Associativity and Add to Associated Part (20min) / All sectors



MTD: Mold Tooling Design

EDU-CAT-E-MTD-FCourse Code EDU-CAT-E-MTD-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-MTD-FI-V5R19 Foils: EDU-CAT-E-MTD-FF-V5R19 Exercises: EDU-CAT-E-MTD-FX-V5R19 Detailed Steps: EDU-CAT-E-MTD-FS-V5R19

ObjectivesUpon Completion of this course you will be able to: - Create the mold base having guided and fixed components using MoldTooling Design workbench - Build the complete assembly of a Plastic Injection Mold.

Participants' ProfileNew Mold Tooling Design users

PrerequisitesStudents attending this course should have knowledge of CATIA V5Fundamentals and TG1 Tooling Design Fundamentals

ContentIntroduction to Mold Tooling DesignCreating a New MoldEditing the Mold Base Working with Mold ComponentsMold Design to ManufacturingCreating Injection Features Additional Information

ExercisesNone



PDG: CATIA Part Design

EDU-CAT-E-PDG-FCourse Code EDU-CAT-E-PDG-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PDG-FI-V5R19 Foils: EDU-CAT-E-PDG-FF-V5R19 Exercises: EDU-CAT-E-PDG-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Design mechanical parts using basic solid feature creation methods - Create 3D solid features based on 2D sketches - Apply Dress-Up features - Duplicate 3D features - Move features - Modify a solid model


PrerequisitesStudents attending this course should have the knowledge of CATIA Basicsand CATIA Sketcher.

ContentThis course will introduce you to the use of the CATIA Part Design workbench.You will learn the basic methods used in order to create and modify solidfeatures and parts.

- Introduction to Part Design- Basic Sketch Based Features- Basic Dressing-Up Features- Part Design Transformations- Part Design Modifications

ExercisesEx. 1: Angle Plate (20min) / All sectorsEx. 2: Clamp Holder (30min) / All sectorsEx. 3: Dress-Up Features (75min) / All sectorsEx. 4: Part Design Transformation Recap Exercises (60min) / All sectorsEx. 5: Connector Housing (90min) / All sectors



PDG: CATIA Part Design Expert

EDU-CAT-E-PDG-ACourse Code EDU-CAT-E-PDG-ACATIA V5R19Brand & Release CATIA V5R191.5 daysDuration 1.5 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PDG-AI-V5R19 Foils: EDU-CAT-E-PDG-AF-V5R19 Exercises: EDU-CAT-E-PDG-AX-V5R19

ObjectivesUpon completion of this course, you will be able to:-Use 3D reference Elements to create a part-Create advanced Sketch-Based Features-Apply Advanced Dress-Up Features-Design using Boolean operations-Share Designs by working in Multi-Model environment-Analyse Parts-Annotate Parts for review

Participants' ProfileCATIA V5 Mechanical Designers.

PrerequisitesStudents attending this course should have the knowledge of CATIA V5Fundamentals, Getting started with CATIA V5, Sketcher, Part DesignFundamentals

ContentThis course will teach you to design ‘Complex’ 3D mechanical parts fromsketches in context of an assembly. You will build upon the knowledge gainedin the Part Design Course and will be equiped to use ‘Advanced’ featuresoffered by the Part Design workbench.

- Using 3D Elements to Create a Part- Sketch-Based Features- Part Manipulations- Dress-Up Features- Part Analysis- Annotations

ExercisesEx. 1: Connector Housing (90min) / All sectorsEx. 2: Bike Rear Lever (60min) / All sectorsEx. 3: Fitting (60min) / All sectorsEx. 4: Master Exercise: Mobile Phone Bottom Case Bottom Case (90min) / AllsectorsEx. 5: Meat Mincer Screw (30min) / All sectorsEx. 6: Hinge (50min) / All sectorsEx. 7: Car Jack Support (60min) / All sectorsEx. 8: Piston (95min) / All sectorsEx. 9: Side Toolhead (60min) / All sectorsEx. 10: Tee Fitting (60min) / All sectorsEx. 11: Pedal Crank (60min) / All sectors



PWT: Engine Design Methodology

EDU-CAT-E-PWT-FCourse Code EDU-CAT-E-PWT-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-CPWT-FI-V5R19 Foils: EDU-CAT-E-CPWT-FF-V5R19 Exercises: EDU-CAT-E-CPWT-FX-V5R19

ObjectivesThis course covers the CATIA V5 methodologies for engine design.

Participants' ProfilePowertrain engineering department and Powertrain suppliers

PrerequisitesCATIA V5R16 on NT or UNIX configuration with1024 Mbytes RAM minimum

Content- Introduction to engine design methodologies- Engine Design Methodologies: Presentation- Skeleton Process- Basic Features Creation- Engine Design Methodologies : Basic Features Creation- Head Tangential Port Design- Engine Design Methodologies : Head Port Design- Basic feature assembling methodologies- Engine Design Methodologies: Basic Features Assembling- Manufacturing Specifications- Engine Design Methodologies: Manufacturing Specifications- Oil Pan Design Methodology

ExercisesNone



SKE: CATIA Sketcher

EDU-CAT-E-SKE-FCourse Code EDU-CAT-E-SKE-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SKE-FI-V5R19 Foils: EDU-CAT-E-SKE-FF-V5R19 Exercises: EDU-CAT-E-SKE-FX-V5R19

ObjectivesUpon completion of this course you will be able to... - Understand the basics of CATIA sketcher environment - Create 2D sketch geometry - Analyze sketch geometry - Edit existing 2D profiles - Dimension sketch geometry and modify it with constraints - Manage sketches within a 3D environment.


PrerequisitesStudents attending this course should have knowledge of CATIA Basics

Content- Introduction to the CATIA Sketcher- Sketcher Geometry Management- Sketcher Constraints Management- Sketcher Analysis Tools

ExercisesEx. 1: Sketcher Geometry Exercises (20min) / All sectorsEx. 2: Sketcher Constraints Exercises (10min) / All sectorsEx. 3: Master Exercise : Gasket (60min) / All sectors



SMD: Generative Sheetmetal Design

EDU-CAT-E-SMD-FCourse Code EDU-CAT-E-SMD-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesUnderstand the terminology and the creation process for sheet metal partdesignDefine and manage sheet metal part parametersDesign walls, bends and flanges- Add features such as cutouts, holes, corners and chamfers - Create standard and user defined stamped features- Manage folded and unfolded views and export a finished flat pattern

Participants' ProfileMechanical Designers, Sheetmetal Designers

PrerequisitesCATIA V5 Fundamentals.


ContentThis course will teach you how to design a sheet metal part using associativefeature-based modeling. Standard and user defined stamped features can beintegrated into the design and the resulting flat pattern is calculated inaccordance with standard bend allowances or with company specific bendallowance tables.

Getting Started- Introduction to Sheet Metal Design- Generative Sheet Metal Design Overview- Defining Sheet Metal Parameters- Recommendations for Getting Started

Sheet Metal Walls - What is a Sheet Metal Wall?- Defining the First Wall- Secondary Walls- Part Recognition- Recommendations for Sheet Metal Walls

Bends and Unfolded Mode- Bends- Unfolded Mode- Corner Relief- Recommendations for Bends

Flanges- Creating Flanges- Recommendations for Flanges

Sheet Metal Features- Cutouts- Holes- Corners and Chamfers- Standard Stamps- User-Defined Stamps- Recommendations for Sheet Metal Features

Transformations and Duplication - Transformation of Parts- Patterns- Mirror- PowerCopies- Recommendations for Duplication

Mapping and Output- Point or Curve Mapping- Output

Advanced Topics in Sheet Metal- Sheet Metal Standard Files- Multi-Body Methodology

ExercisesNone



SMD: CATIA Generative Sheet Metal Design V5R19Update

EDU-CAT-E-SMD-UCourse Code EDU-CAT-E-SMD-UCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishUpdateLevel UpdateCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SMD-UI-V5R19 Foils: EDU-CAT-E-SMD-UF-V5R19

ObjectivesUpon completion of this course you will be able to use the enhancedfunctionalities in the Generative Sheetmetal Design Workbench for the V5R19release.


PrerequisitesStudents attending this course must have knowledge of CATIA GenerativeSheetmetal Design V5R18.

ContentExtrusion Enhancements- Automatic Bend Enhancement- Exploded Mode Enhancements- How to Explode Connected Extrusion- How to Explode Disconnected Extrusion- Constraints Creation during Explode- Sketches Generated during Explode- Do it YourselfRecognize Enhancement- Recognition of Stamps on Bends- How to Recognize Stamps on Bends- Do it YourselfIntegrate Unfolded Curve in Drawing- Standard Settings- Unfolded Curve Enhancement- How to Integrate an Unfolded Curve in Drawing- Do it Yourself- Paste Special Enhancement- Handling Parts in a Multi-Document Environment- How to Use As Result All Views Option- How to Use As Result With Link All Views Option- Do it Yourself

ExercisesNone



SR1: Structure Design

EDU-CAT-E-SR1-FCourse Code EDU-CAT-E-SR1-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SR1-FI-V5R19 Foils: EDU-CAT-E-SR1-FF-V5R19 Exercises: EDU-CAT-E-SR1-FX-V5R19 Additional Information: EDU-CAT-E-SR1-FO-V5R19

ObjectivesIn this course you will learn methods to quickly create and modify linear andcurved structures, and plates using standard or user-defined sections. Itaddresses any kind of Frames, Foundations and Steel construction …, invarious domains like Aerospace, Automotive and F&A.

Participants' ProfileNew CATIA V5 users

PrerequisitesCOM, WFS, PDG


Content1.Introduction to Structure Designp6 Accessing the Workbench p7 Exploring the User Interfacep8 Terminologyp92.Options & Project Resources Managementp10 Setting Structure Design Optionsp11 Setting Part Design Options p12 Setting Assembly Design Optionsp14 Selecting a Projectp153.Creating Skeletonsp17 What about Skeletons?p18 Creating Grids in 3Dp194.Defining and Creating Shapes & Platesp22 What about Shapes? p23 Generating Piece Parts p24 Defining & Placing Shapes… p26 Defining Material & Gradep27 Defining Section p28 Defining Shape Anchor Point p29 Defining Shape Orientation p30 Placing Shapes Using Points p31 Placing Shapes on Support p34 Creating Plates & End-Platesp36 Creating Small Assemblies p425.Modifying Shapes & Platesp44 Modifying Shapes & Plates Definition p45 Extending and Stretching Shapesp47 Splitting and Merging Shapes & Platesp48 Nibbling/Coping Shapes ans Platesp49 Defining Cutbacks p51 Removing Cutbacks p57 Placing Cutoutsp58 Modifying Cutouts p63 Removing Cutouts p64 Placing End Cuts p65 Modifying and Removing End Cuts p69 Placing Slotsp70 Modifying Slotsp74 Removing Slotsp75

ExercisesEx. 1: Select your project and options (15min) / All sectorsEx. 2: External Turret: Panel System (45min) / All sectorsEx. 3: External Turret: Jacket System (30min) / All sectorsEx. 4: External Turret: Floor System (30min) / All sectorsEx. 5: External Turret: Detailing (90min) / All sectorsEx. 6: External Turret: Modifications (15min) / All sectorsEx. 7: External Turret: Secondary Structures (30min) / All sectorsEx. 8: Piece Part Generation (30min) / All sectors



SRA: Structure Design Administration

EDU-CAT-E-SRA-ACourse Code EDU-CAT-E-SRA-ACATIA V5R19Brand & Release CATIA V5R194 daysDuration 4 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SRA-AI-V5R19 Foils: EDU-CAT-E-SRA-AF-V5R19 Exercises: EDU-CAT-E-SRA-AX-V5R19 Additional Information: EDU-CAT-E-SRA-AO-V5R19

ObjectivesIn this course you will learn methods to:- administrate a SR1 project.- Create or modify a Section Catalog- Create End-Cuts, Slots and Small Assmblies


PrerequisitesCOM, WFS, PDG, SR1, PKT, KWA (Optional)

Content1. Project Resource Managementp5 Introducing the PRMp6 Understanding the PRMp7 Structure Discipline Resourcesp11 Accessing & Checking the PRM p152. Feature Dictionaryp16 About the Feature Dictionaryp17 Starting the Feature Dictionary Editorp18 Managing Attributes p19 Discrete Valuesp21 Managing ID Numberp223. Standard Section Catalogsp24 Managing Parametric Sectionsp25 Generating Resolved Partsp30 Creating/Modifying Standard Section Catalogsp32 Creating/Modifying the StructureSpecificationMaterial Catalogsp344. Detailing Featuresp41 Design Rules and Recommendationsp42 End-Cutsp45 Slotsp51 Small Assembliesp54 Storing Detailing Features in a catalogp57

ExercisesEx. 1: Creating a New Project (180min) / All sectorsEx. 2: Adding New Attributes (180min) / All sectorsEx. 3: Creating a Resolved Standard section (240min) / All sectorsEx. 4: Modifying the StructureSpecifiactionMaterial Catalog (240min) / AllsectorsEx. 5: Creating a Standard End-Cut (180min) / All sectorsEx. 6: Creating a Contextual End-Cut (180min) / All sectorsEx. 7: Creating a Slot (180min) / All sectorsEx. 8: Creating a Small Assembly (180min) / All sectors



TG1: Tooling Design

EDU-CAT-E-TG1-FCourse Code EDU-CAT-E-TG1-FCATIA V5R19Brand & Release CATIA V5R191.5 daysDuration 1.5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-TG1-FI-V5R19 Exercises: EDU-CAT-E-TG1-FX-V5R19 Detailed Steps: EDU-CAT-E-TG1-FS-V5R19

ObjectivesUpon completion of this course you will be able to:Create the die and mold components using Mold Tool Design workbench.Instantiate the components in a die or mold structure.

Participants' ProfileNew Tooling Design users

PrerequisitesStudents attending this course should have experience in the followingdomain(s): CATIA V5 Fundamentals

ContentIntroduction to Tooling DesignCreating ComponentsEditing ComponentsSpecific Components : Inserts & SlidersAdvanced Add/Remove CapabilitiesManaging User ComponentsTool Design to Manufacturing

ExercisesEx. 1: Master Exercise: The Phone Handset (150min) / All sectors



V5E: CATIA V5 Mechanical Design Expert

EDU-CAT-E-V5E-ACourse Code EDU-CAT-E-V5E-ACATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V5E-AI-V5R19 Foils: EDU-CAT-E-V5E-AF-V5R19

Objectives- Create a complex model in CATIA V5- Create and manage a structured model- Design parts in the context of an assembly- Re-use existing data to complete assemblies- Manage relationships between assembled parts- Analyze and annotate your design

Participants' ProfileMechanical designers already having an experience of CATIA V5 mechanicaldesign foundations.


ContentThis course will teach you how to start a complex design project from itsspecifications (top down approach) and complete it by reusing existing data. Itwill focus on advanced skills and concepts that enable you to create andanalyze complex parts and assemblies.

Lesson 1: IntroductionLesson 2: Design Complex PartsLesson 3: Surface DesignLesson 4: Analyze and Annotate PartsLesson 5: Sharing InformationLesson 6: Assembly DesignLesson 7: Design in ContextLesson 8: Complex Assembly DesignMaster Project 1: Mobile PhoneMaster Project 2: Lifting Truck


ExercisesEx. 1: Introduction (40min) / All sectorsEx. 2: Rib and Slot (15min) / All sectorsEx. 3: Thin Rib (15min) / All sectorsEx. 4: Multi-Sections Feature (20min) / All sectorsEx. 5: Rib and Multi-section Solid (30min) / All sectorsEx. 6: Geometry Replace (5min) / All sectorsEx. 7: Solid Combine and Advanced Draft (30min) / All sectorsEx. 8: Advanced Draft (20min) / All sectorsEx. 9: Multi-Body Work (35min) / All sectorsEx. 10: Case Study: Design Complex Parts (15min) / All sectorsEx. 11: Complex Wireframe Creation (20min) / All sectorsEx. 12: Splines, Circles and Projections (20min) / All sectorsEx. 13: Simple Surfaces (5min) / All sectorsEx. 14: Sweep and Blend (30min) / All sectorsEx. 15: Sweep and Fill (30min) / All sectorsEx. 16: Join, Trim and Transformations (20min) / All sectorsEx. 17: Join, Trim and Close Surface (20min) / All sectorsEx. 18: Join, Trim and Fillet (20min) / All sectorsEx. 19: Surface Design (40min) / All sectorsEx. 20: Curvature Analysis (20min) / All sectorsEx. 21: Draft Analysis (20min) / All sectorsEx. 22: 3D Constraints (20min) / All sectorsEx. 23: 3D Annotations (20min) / All sectorsEx. 24: Analyze and Annotate Parts (40min) / All sectorsEx. 25: PowerCopy (10min) / All sectorsEx. 26: PowerCopy and Catalog (10min) / All sectorsEx. 27: Design Table (15min) / All sectorsEx. 28: Design Table and Parameters (20min) / All sectorsEx. 29: Catalog (20min) / All sectorsEx. 30: Catalog Modification (20min) / All sectorsEx. 31: Case Study: Sharing Information (30min) / All sectorsEx. 32: Desk and Product to Part (15min) / All sectorsEx. 33: Flexible Sub-Assembly (20min) / All sectorsEx. 34: Desk and Flexible Sub-Assembly (20min) / All sectorsEx. 35: Assembly Analysis (20min) / All sectorsEx. 36: Clash Analysis and Section (20min) / All sectorsEx. 37: Scenes (30min) / All sectorsEx. 38: Symbols and Annotations (10min) / All sectorsEx. 39: Case Study: Assembly Management (40min) / All sectorsEx. 40: Component Visualization (20min) / All sectorsEx. 41: Visualization Mode (20min) / All sectorsEx. 42: Feature in Context (20min) / All sectorsEx. 43: Sketch in Context (20min) / All sectorsEx. 44: Part in Context (20min) / All sectorsEx. 45: Assembly Split and Hole (20min) / All sectorsEx. 46: Links Analysis (30min) / All sectorsEx. 47: Case Study: Contextual Design (40min) / All sectorsEx. 48: Skeleton Model Use (20min) / All sectorsEx. 49: Skeleton Parameter Use (20min) / All sectorsEx. 50: Skeleton and Design in Context (90min) / All sectorsEx. 51: Publication (20min) / All sectorsEx. 52: Parameter Publication (30min) / All sectorsEx. 53: Case Study: Complex Assembly Design (80min) / All sectorsEx. 54: Master Project: Mobile Phone (100min) / All sectorsEx. 55: Master Project : Battery Reservation Space (10min) / All sectorsEx. 56: Master Project : Mobile Phone Bottom Case (60min) / All sectorsEx. 57: Master Project : Modifying the Design (20min) / All sectorsEx. 58: Master Project: Analyze and Modify the Design (20min) / All sectorsEx. 59: Master Project: Lifting Truck (240min) / All sectors



V5F: CATIA V5 Fundamentals

EDU-CAT-E-V5F-FCourse Code EDU-CAT-E-V5F-FCATIA V5R19Brand & Release CATIA V5R195 daysDuration 5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V5F-FI-V5R19 Foils: EDU-CAT-E-V5F-FF-V5R19

ObjectivesUnderstand the CATIA V5 interface Plan the construction of a part in order to properly convey its visual andfunctional aspects Create simple parts in CATIA V5 Understand how to manage parts in the context of an assembly Produce simple drawings and assembly layouts













- Lesson 10: Drafting ANSI


ExercisesEx. 1: Design Intent (20min) / All sectorsEx. 2: CATIA V5 User Interface (20min) / All sectorsEx. 3: Introduction to CATIA (20min) / All sectorsEx. 4: Profile Creation (15min) / All sectorsEx. 5: Multiple Profile Creation (10min) / All sectorsEx. 6: Sketch Constraints (15min) / All sectorsEx. 7: Basic Features Creation (15min) / All sectorsEx. 8: Edge and Face-Face Fillets (10min) / All sectorsEx. 9: Multiple Profile Sketch Features (15min) / All sectorsEx. 10: Sketch Analysis and Pocket (15min) / All sectorsEx. 11: Shaft and Groove (15min) / All sectorsEx. 12: Thin Pad and Shell (15min) / All sectorsEx. 13: Pad, Fillet, Hole and Shell (20min) / All sectorsEx. 14: Case Study: Additional Part Features (20min) / All sectorsEx. 15: Stiffeners and Draft (20min) / All sectorsEx. 16: Reflect Draft (20min) / All sectorsEx. 17: Thread and Tap (20min) / All sectorsEx. 18: Thread (10min) / All sectorsEx. 19: Features Deactivation (10min) / All sectorsEx. 20: Features Activation (10min) / All sectorsEx. 21: Update Error Management (20min) / All sectorsEx. 22: Dress-up Features (25min) / All sectorsEx. 23: Patterns (30min) / All sectorsEx. 24: Part Transformation and Catalog (15min) / All sectorsEx. 25: Patterns Modifications (10min) / All sectorsEx. 26: Pattern and Catalog (30min) / All sectorsEx. 27: Case Study: Reusing Data (35min) / All sectorsEx. 28: Material and Measures (15min) / All sectorsEx. 29: Parameter and Formula (50min) / All sectorsEx. 30: Finalizing Design Intent (30min) / All sectorsEx. 31: Basic Assembly (20min) / All sectorsEx. 32: Reuse Components (20min) / All sectorsEx. 33: Component Positioning (10min) / All sectorsEx. 34: Constrain Components (20min) / All sectorsEx. 35: Constraints Creation (20min) / All sectorsEx. 36: Degrees of Freedom (20min) / All sectorsEx. 37: Assembly Design (20min) / All sectorsEx. 38: Visualization and Design Modes (25min) / All sectorsEx. 39: Design in Context (25min) / All sectorsEx. 40: Drawing Creation (20min) / All sectorsEx. 41: Drafting (20min) / All sectorsEx. 42: Master Exercise: Drill Press Assembly (270min) / All sectors



V5VB: V5 Automotive - Fundamental Course for BodyDesigners

EDU-CAT-E-V5VB-FCourse Code EDU-CAT-E-V5VB-FCATIA V5R19Brand & Release CATIA V5R197 daysDuration 7 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V5VB-FI-V5R19 Foils: EDU-CAT-E-V5VB-FF-V5R19

ObjectivesThis course will introduce the fundamental concepts that are required to buildsimple automotive parts and assemblies in CATIA V5, and teaches how tomake simple drawings of those parts and assemblies. It will introduce you tothe correct surface modeling methodology necessary for body or chassisdesign.

At the end of the course students will be able to:- Understand the CATIA V5 interface- Plan the construction of an automotive part in order to properly convey itsvisual and functional aspects- Create simple automotive parts in CATIA V5- Use correct surface modeling methodology for body or chassis design- Understand how to design and manage parts in the context of an assembly- Produce simple drawings and assembly layouts

Participants' ProfileAutomotive Chassis or Body Designers

PrerequisitesNone

ContentThis course is made up of 12 lessons.

-Lesson 1: Introduction to CATIA-Lesson 2: Profile Creation-Lesson 3: Basic Features-Lesson 4: Additional Features-Lesson 5: Dress-Up Features-Lesson 6: Reusing Data-Lesson 7: Create Simple Surface-Lesson 8: Create Complex Surfaces-Lesson 9: Surface Modification Tools-Lesson 10: Assembly Design-Lesson 11: Designing in Context-Lesson 12: Drafting (ISO)


ExercisesEx. 1: Design Intent (20min) / All sectorsEx. 2: CATIA V5 Interface (20min) / All sectorsEx. 3: Case Study: Introduction to CATIA (20min) / All sectorsEx. 4: Profiles Creation (15min) / All sectorsEx. 5: Sketch Constraints (15min) / All sectorsEx. 6: Basic Features Creation (15min) / All sectorsEx. 7: Additional Sketcher Tools (15min) / All sectorsEx. 8: Shaft and Groove (15min) / All sectorsEx. 9: Fillet and Chamfer (15min) / All sectorsEx. 10: Wireframe Creation (15min) / All sectorsEx. 11: Features from Wireframe (20min) / All sectorsEx. 12: Shell and Holes (20min) / All sectorsEx. 13: Case Study: Additional Features (20min) / All sectorsEx. 14: Stiffeners and Draft (20min) / All sectorsEx. 15: Drafts (20min) / All sectorsEx. 16: Features Deactivation (10min) / All sectorsEx. 17: Features Activation (10min) / All sectorsEx. 18: Thread and Tap (20min) / All sectorsEx. 19: Feature Failures (10min) / All sectorsEx. 20: Case Study: Dress-up Features (25min) / All sectorsEx. 21: Patterns (30min) / All sectorsEx. 22: Features Duplication (15min) / All sectorsEx. 23: Wireframe and Publication (10min) / All sectorsEx. 24: Case Study: Reusing Data (35min) / All sectorsEx. 25: Complex Wireframe Creation (20min) / All sectorsEx. 26: Surface Creation (20min) / All sectorsEx. 27: Surface Analysis and Modification (20min) / All sectorsEx. 28: Case Study: Create Simple Surfaces (10min) / All sectorsEx. 29: Complex Surfaces Creation (20min) / All sectorsEx. 30: Multi-Sections Surface (10min) / All sectorsEx. 31: Surfaces Operations (20min) / All sectorsEx. 32: Surface Delimitation (40min) / All sectorsEx. 33: Boss and Flange Creation (30min) / All sectorsEx. 34: Case Study: Create Complex Surfaces (30min) / All sectorsEx. 35: Update Errors Management (30min) / All sectorsEx. 36: Surface Symmetry (15min) / All sectorsEx. 37: Surface Analysis (15min) / All sectorsEx. 38: Case Study: Surface Modification Tools (10min) / All sectorsEx. 39: Assemble Components (20min) / All sectorsEx. 40: Reuse Components (20min) / All sectorsEx. 41: Components Manipulation (10min) / All sectorsEx. 42: Constrain Components (20min) / All sectorsEx. 43: Assembly Design (10min) / All sectorsEx. 44: Visualization Mode (20min) / All sectorsEx. 45: Contextual Part (20min) / All sectorsEx. 46: Case Study: Designing in Context (20min) / All sectorsEx. 47: Drawing Creation (20min) / All sectorsEx. 48: Additional Views (15min) / All sectorsEx. 49: Case Study: Drafting (ISO) (10min) / All sectorsEx. 50: Master Project: Door Assembly (30min) / All sectors



V5VC: V5 Automotive - Fundamental Course forChassis Designers

EDU-CAT-E-V5VC-FCourse Code EDU-CAT-E-V5VC-FCATIA V5R19Brand & Release CATIA V5R197 daysDuration 7 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course will introduce the fundamental concepts that are required to buildsimple automotive parts and assemblies in CATIA V5, and teaches how tomake simple drawings of those parts and assemblies. It will introduce you tothe correct surface modeling methodology necessary for body or chassisdesign.

At the end of the course students will be able to:- Understand the CATIA V5 interface- Plan the construction of an automotive part in order to properly convey itsvisual and functional aspects- Create simple automotive parts in CATIA V5- Use correct surface modeling methodology for body or chassis design- Understand how to design and manage parts in the context of an assembly- Produce simple drawings and assembly layouts

Participants' ProfileAutomotive Chassis or Body Designers

PrerequisitesNone

ContentThis course is made up of 12 lessons.

Lessons 1- 6: Introduction to basic modeling in CATIA V5Lessons 7 - 9: Surface Modeling for Chassis / Body DesignLessons 10 - 11: Assembly DesignLessons 12: DraftingMaste Project


ExercisesEx. 1: Design Intent (20min) / All sectorsEx. 2: CATIA V5 Interface (20min) / All sectorsEx. 3: Introduction to CATIA (20min) / All sectorsEx. 4: Profiles Creation (15min) / All sectorsEx. 5: Sketch Constraints (15min) / All sectorsEx. 6: Basic Features Creation (15min) / All sectorsEx. 7: Case Study: Basic Features (20min) / All sectorsEx. 8: Additional Sketcher Tools (15min) / All sectorsEx. 9: Shaft and Groove (15min) / All sectorsEx. 10: Fillet and Chamfer (15min) / All sectorsEx. 11: Wireframe Creation (15min) / All sectorsEx. 12: Features from Wireframe (20min) / All sectorsEx. 13: Shell and Holes (20min) / All sectorsEx. 14: Case Study: Additional Features (20min) / All sectorsEx. 15: Stiffeners and Draft (20min) / All sectorsEx. 16: Drafts (20min) / All sectorsEx. 17: Features Deactivation (10min) / All sectorsEx. 18: Features Activation (10min) / All sectorsEx. 19: Thread and Tap (20min) / All sectorsEx. 20: Feature Failures (10min) / All sectorsEx. 21: Case Study: Dress-up Features (25min) / All sectorsEx. 22: Patterns (30min) / All sectorsEx. 23: Features Duplication (15min) / All sectorsEx. 24: Wireframe and Publication (10min) / All sectorsEx. 25: Case Study: Reusing Data (35min) / All sectorsEx. 26: Complex Wireframe Creation (20min) / All sectorsEx. 27: Surface Creation (20min) / All sectorsEx. 28: Surface Analysis and Modification (20min) / All sectorsEx. 29: Case Study: Create Simple Surfaces (10min) / All sectorsEx. 30: Multi-Body Work (25min) / All sectorsEx. 31: Core Removing (25min) / All sectorsEx. 32: Wireframe and Multi-Body (25min) / All sectorsEx. 33: Case Study: Create Complex Parts (10min) / All sectorsEx. 34: Part Design Transformations (15min) / All sectorsEx. 35: Rib and Slot (15min) / All sectorsEx. 36: Multi-Sections Feature (20min) / All sectorsEx. 37: Multi-Sections Feature and Rib (20min) / All sectorsEx. 38: Draft and Thickness (30min) / All sectorsEx. 39: Advanced Draft (20min) / All sectorsEx. 40: Advanced Solid Features (10min) / All sectorsEx. 41: Material and Measures (15min) / All sectorsEx. 42: Parameters and Formulas (15min) / All sectorsEx. 43: Finalizing Design Intent (10min) / All sectorsEx. 44: Assemble Components (20min) / All sectorsEx. 45: Reuse Components (20min) / All sectorsEx. 46: Components Manipulation (10min) / All sectorsEx. 47: Constrain Components (20min) / All sectorsEx. 48: Case Study: Assembly Design (10min) / All sectorsEx. 49: Visualization Mode (20min) / All sectorsEx. 50: Contextual Part (20min) / All sectorsEx. 51: Case Study: Designing in Context (20min) / All sectorsEx. 52: Drawing Creation (20min) / All sectorsEx. 53: Additional Views (15min) / All sectorsEx. 54: Additional Views and Dimensions (15min) / All sectorsEx. 55: Case Study: Drafting (ISO) (10min) / All sectorsEx. 56: Master Project: Spring Damper Assembly (30min) / All sectors



V5VP: V5 Automotive - Fundamental Course forPowertrain Designers

EDU-CAT-E-V5VP-FCourse Code EDU-CAT-E-V5VP-FCATIA V5R19Brand & Release CATIA V5R197 daysDuration 7 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course will introduce the fundamental concepts that are required to buildsimple automotive parts and assemblies in CATIA V5, and teaches how tomake simple drawings of those parts and assemblies. It will introduce you tothe advanced solid modeling techniques necessary for Powertrain designmethodology.

ContentThis course is made up of 12 lessons:Lessons 1 - 6:Introduction to basic Solid ModelingLessons 7 - 9: Complex Solid ModelingLessons 10 - 11: Assembly DesignLesson 12: DraftingMaster Project


ExercisesEx. 1: Design Intent (20min) / All sectorsEx. 2: CATIA V5 Interface (20min) / All sectorsEx. 3: Introduction to CATIA (20min) / All sectorsEx. 4: Profiles Creation (15min) / All sectorsEx. 5: Sketch Constraints (15min) / All sectorsEx. 6: Basic Features Creation (15min) / All sectorsEx. 7: Case Study: Basic Features (20min) / All sectorsEx. 8: Additional Sketcher Tools (15min) / All sectorsEx. 9: Shaft and Groove (15min) / All sectorsEx. 10: Fillet and Chamfer (15min) / All sectorsEx. 11: Wireframe Creation (15min) / All sectorsEx. 12: Features from Wireframe (20min) / All sectorsEx. 13: Shell and Holes (20min) / All sectorsEx. 14: Case Study: Additional Features (20min) / All sectorsEx. 15: Stiffeners and Draft (20min) / All sectorsEx. 16: Drafts (20min) / All sectorsEx. 17: Features Deactivation (10min) / All sectorsEx. 18: Features Activation (10min) / All sectorsEx. 19: Thread and Tap (20min) / All sectorsEx. 20: Feature Failures (10min) / All sectorsEx. 21: Case Study: Dress-up Features (25min) / All sectorsEx. 22: Patterns (30min) / All sectorsEx. 23: Features Duplication (15min) / All sectorsEx. 24: Wireframe and Publication (10min) / All sectorsEx. 25: Case Study: Reusing Data (35min) / All sectorsEx. 26: Multi-Body Work (25min) / All sectorsEx. 27: Core Removing (25min) / All sectorsEx. 28: Wireframe and Multi-Body (25min) / All sectorsEx. 29: Create Complex Parts (10min) / All sectorsEx. 30: Part Design Transformations (15min) / All sectorsEx. 31: Rib and Slot (15min) / All sectorsEx. 32: Multi-Sections Feature (20min) / All sectorsEx. 33: Multi-Sections Feature and Rib (20min) / All sectorsEx. 34: Draft and Thickness (30min) / All sectorsEx. 35: Advanced Draft (20min) / All sectorsEx. 36: Advanced Solid Features (10min) / All sectorsEx. 37: Material and Measures (15min) / All sectorsEx. 38: Parameters and Formulas (20min) / All sectorsEx. 39: Case Study: Finalizing Design Intent (10min) / All sectorsEx. 40: Assemble Components (20min) / All sectorsEx. 41: Reuse Components (20min) / All sectorsEx. 42: Components Manipulation (10min) / All sectorsEx. 43: Constrain Components (20min) / All sectorsEx. 44: Case Study: Assembly Design (10min) / All sectorsEx. 45: Visualization Mode (20min) / All sectorsEx. 46: Contextual Part (20min) / All sectorsEx. 47: Case Study: Designing in Context (20min) / All sectorsEx. 48: Drawing Creation (20min) / All sectorsEx. 49: Additional Views (15min) / All sectorsEx. 50: Additional Views and Dimensions (15min) / All sectorsEx. 51: Case Study: Drafting (ISO) (10min) / All sectorsEx. 52: Master Project: Cylinder Head Assembly (70min) / All sectors



WD1: Weld Design

EDU-CAT-E-WD1-FCourse Code EDU-CAT-E-WD1-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-WD1-FI-V5R19 Foils: EDU-CAT-E-WD1-FF-V5R19 Exercises: EDU-CAT-E-WD1-FX-V5R19

ObjectivesUpon completion of this course you will be able to - Weld parts, - Generate Weld reports, - Extract 2D views from 3D welds.

Participants' ProfileMechanical and Structural Designers


Content- Workbench presentation- Weld creation- Weld edition- Weld report and drawing

Complete industrial exercice

ExercisesNone



Machining Solutions


MachiningSolutions

AMG: Advanced Part Machining

EDU-CAT-E-AMG-FCourse Code EDU-CAT-E-AMG-FCATIA V5R19Brand & Release CATIA V5R191.5 daysDuration 1.5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-AMG-FI-V5R19 Foils: EDU-CAT-E-AMG-FF-V5R19 Exercises: EDU-CAT-E-AMG-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Identify and use the Advance Part Machining workbench tools- Define a Multi-Axis Flank Contouring operation- Define a Multi-Axis Helix Machining operation- Define a Cavities Roughing operation

Participants' ProfileAdvanced NC Programmers

PrerequisitesStudents attending this course should have knowledge of Numerical ControlInfrastructure(NCI), PMG, SMG and MMG workbench.

Content- Multi Axis Flank Contouring operation- Multi Axis Helix machining operation - Cavities Roughing operation

ExercisesEx. 1: Multi-Axis Flank Contouring (100min) / All sectorsEx. 2: Multi-Axis Helix Machining (35min) / All sectorsEx. 3: Cavities Roughing (45min) / All sectorsEx. 4: Aerospace Part (60min) / All sectors


MachiningSolutions

LMG: Lathe Machining

EDU-CAT-E-LMG-FCourse Code EDU-CAT-E-LMG-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-LMG-FI-V5R19 Foils: EDU-CAT-E-LMG-FF-V5R19 Exercises: EDU-CAT-E-LMG-FX-V5R19 Detailed Steps: EDU-CAT-E-LMG-FS-V5R19

ObjectivesUpon completion of this course you will be able to:-Identify and use the Lathe Machining workbench tools-Define Lathe Machining operations-Manage Tools and Tool Assemblies-Use different methodologies for Lathe Machining

Participants' ProfileNC Programmers

PrerequisitesCATIA V5 Fundamentals Numerical Control Infrastructure workbench

Content-Introduction to Lathe Machining-Lathe Operations:-Rough Turning Operation-Groove Turning Operation-Recess Turning Operation-Groove Finish Turning Operation-Profile Finish Turning Operation-Thread Turning Operation-Sequential Turning Operation-Ramp Rough Turning Operation-Ramp Recess Turning Operation-Tools and Tool Assemblies Management-Methodologies for Lathe Machining

ExercisesEx. 1: Crankshaft (85min) / All sectorsEx. 2: Ramp Rough Turning Operation (10min) / All sectorsEx. 3: Design Associativity (10min) / All sectorsEx. 4: Generate Outputs (10min) / All sectorsEx. 5: Groove Turning Operation (10min) / All sectorsEx. 6: Facing Head (30min) / All sectors


MachiningSolutions

MLG: Multi-Slide Lathe Machining

EDU-CAT-E-MLG-FCourse Code EDU-CAT-E-MLG-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-MLG-FI-V5R19 Foils: EDU-CAT-E-MLG-FF-V5R19 Exercises: EDU-CAT-E-MLG-FX-V5R19

ObjectivesUpon completion of this course you will learn how to program with CATIA V5Multi turret & Multi spindle machines.

Participants' ProfileNC programmer who wants to optimize the NC Program in a Multi turretMachine environment

PrerequisitesStudents attending this course must have knowledge of CATIA V5Fundamentals, NC Infrastructure, Lathe Machining

Content- Introduction to Multi- Slide Lathe Machining- Machine Definition- Create Manufacturing Programs- Create Synchronizations- Gantt Chart View- Time Based Replay- NC Outputs- Create NC Programs

ExercisesEx. 1: Master Exercise: Turning Part (120min) / All sectorsEx. 2: Added Exercise - Multi -spindle machining (90min) / All sectors


MachiningSolutions

MMG: Multi-Axis Surface Machining

EDU-CAT-E-MMG-FCourse Code EDU-CAT-E-MMG-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-MMG-FI-V5R19 Foils: EDU-CAT-E-MMG-FF-V5R19 Exercises: EDU-CAT-E-MMG-FX-V5R19

ObjectivesUpon completion of this course you will be able to - Identify and use the Multi-Axis Surface Machining workbench tools. - Define 5-Axis machining operations such as Multi-Axis Sweeping, Multi-AxisContour Driven, Multi-Axis Curve Machining, Define Multi-Axis IsoparametricMachining, Multi-Axis Drilling and Multi-Axis Tube Machining.

Participants' ProfileAdvanced NC Programmers

PrerequisitesStudents attending this course should have knowledge of CATIA V5 SMG

Content- Multi-Axis Sweeping Operation- Multi-Axis Contour Driven Operation- Multi-Axis Curve Machining Operation- Multi-Axis Isoparametric Machining Operation- Multi-Axis Drilling Operation- Multi-Axis Tube Machining Operation- Multi-Axis Spiral Milling Operation

ExercisesEx. 1: Master Exercise: Fender (Wing) (70min) / All sectorsEx. 2: Exercise 1: Hood (40min) / All sectorsEx. 3: Exercise 2: Pocket (15min) / All sectorsEx. 4: Exercise 3: Isoparametric and Drill (15min) / All sectorsEx. 5: Exercise 4: Multi-Axis Curve Machining (15min) / All sectorsEx. 6: Exercise 5: Tube Machining (40min) / All sectorsEx. 7: Exercise 6: Multi-Axis Spiral Machining (10min) / All sectors


MachiningSolutions

MPA: Prismatic Machining Preparation Assistant

EDU-CAT-E-MPA-FCourse Code EDU-CAT-E-MPA-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-MPA-FI-V5R19 Foils: EDU-CAT-E-MPA-FF-V5R19 Exercises: EDU-CAT-E-MPA-FX-V5R19 Detailed Steps: EDU-CAT-E-MPA-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Define 2.5 Axis Milling operations in CATIA V5 - Create prismatic machinable features - Form a link between Design and Manufacturing


PrerequisitesStudents attending this course should have knowledge of CATIA V5Fundamentals, Numerical Control Infrastructure, Prismatic Machining

Content- Introduction to Prismatic Machining Preparation Assistant- Global features recognition- Local features recognition

ExercisesEx. 1: Manuf Part (60min) / All sectorsEx. 2: Added Exercise (15min) / All sectors


MachiningSolutions

MPG: Multi Pocket Machining

EDU-CAT-E-MPG-FCourse Code EDU-CAT-E-MPG-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-MPG-FI-V5R19 Foils: EDU-CAT-E-MPG-FF-V5R19 Exercises: EDU-CAT-E-MPG-FX-V5R19

ObjectivesUpon completion of this course, you will learn how to define - Power Machining operation- Multi-Pocket Flank Contouring operation

Participants' ProfileNC programmer knowing how to work with CATIA V5 Parts and already skilledin Machining products.

PrerequisitesFundamentals about CATIA V5Numerical Control Infrastructure

Content- Multi- Pockets Machining (Power Machining)- Managing Offsets- Multi-Pocket Flank Contouring

ExercisesEx. 1: Frame Part (40min) / All sectors


MachiningSolutions

NCI: Numerical Control Infrastructure

EDU-CAT-E-NCI-FCourse Code EDU-CAT-E-NCI-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-NCI-FI-V5R19 Foils: EDU-CAT-E-NCI-FF-V5R19 Exercises: EDU-CAT-E-NCI-FX-V5R19 Detailed Steps: EDU-CAT-E-NCI-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Identify and use the tools specific to Manufacturing workbenches - Create a Manufacturing Program and simulate it - Manage Tools and Tool Catalogs - Define and verify the Tool Path - Generate NC data using an integrated Post Processor - Create shop floor documentation - Manage design changes - Import V4 data

Participants' ProfileManufacturing Users (NC Programmers)


ContentCOMMON TOPICSWorkbench PresentationDefine Setup (Part Operation)Machining Operation, Macros, Tools PresentationTool Path Verification & SimulationAuto sequenceAuxiliary OperationsOutput generationAxial OperationsHole selection - Machining Pattern ManagementThe different Process ViewsGeometry wizard (edge, surface)

ADVANCED TOPICSImport & Modify Tool PathResource ManagementPP Word Table customizationV4 NCMill & NCLathe Set Import (optional)Design Change ManagementMachining Processes

APPENDIXSettings


ExercisesEx. 1: Aerospace Structure Part (195min) / All sectorsEx. 2: AdvEx 00- Import APT Source File and Tool Path Modification (30min) /All sectorsEx. 3: AdvEx 01- Import V4 NC data (NCMill / NCLathe) (30min) / All sectorsEx. 4: AdvEx 02- Machining Process Creation and Instantiation (30min) / AllsectorsEx. 5: AdvEx 03- Manage Resources (30min) / All sectorsEx. 6: AdvEx 04- Auto Complete (30min) / All sectorsEx. 7: AdvEx 05- PP Word Table Customization (20min) / All sectorsEx. 8: AdvEx 06- Design Change (10min) / All sectors


MachiningSolutions

PMG: Prismatic Machining

EDU-CAT-E-PMG-FCourse Code EDU-CAT-E-PMG-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PMG-FI-V5R19 Foils: EDU-CAT-E-PMG-FF-V5R19 Exercises: EDU-CAT-E-PMG-FX-V5R19 Detailed Steps: EDU-CAT-E-PMG-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Identify and use the Prismatic Machining workbench tools - Define Prismatic Machining operations (2.5 Axis Milling) in CATIA V5 - Create Prismatic Machining Area and Rework Area - Define and modify NC Macros


PrerequisitesCATIA V5 FundamentalsNumerical Control Infrastructure

ContentMilling operations: - Facing,- Pocketing,- 4-Axis Pocketing, - Prismatic Roughing,- Profile contouring,- Groove milling,- Point to point, - Curve following,- Sequential Axial and Groove - Prismatic rework area,- Prismatic machining area,- Transition Paths (macros)

ExercisesEx. 1: Aerospace Structure Part (130min) / All sectorsEx. 2: Sequential Axial Operation (10min) / All sectorsEx. 3: Sequential Groove Operation (20min) / All sectorsEx. 4: Manuf (180min) / All sectorsEx. 5: Fitting Part (120min) / All sectorsEx. 6: Flap Track (180min) / All sectorsEx. 7: Prismatic Roughing Operation (30min) / All sectors


MachiningSolutions

SMG: Surface Machining

EDU-CAT-E-SMG-FCourse Code EDU-CAT-E-SMG-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-SMG-FI-V5R19 Foils: EDU-CAT-E-SMG-FF-V5R19 Exercises: EDU-CAT-E-SMG-FX-V5R19 Detailed Steps: EDU-CAT-E-SMG-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Identify and use the Surface Machining workbench tools - Define 3-Axis Surface Machining operations- Create Probing Operations - Create a Machining Area before performing the operations - Define a Rework Area - Analyze and modify the Tool Path

Participants' ProfileManufacturing users (NC programmers)

Prerequisites- CATIA V5 Fundamentals- Numerical Control Infrastructure

ContentIntroduction to the 3-Axis Surface Machining Creating geometrical elements Creating a Machining Feature Creating 3-Axis Surface Machining Operations Sweep Roughing Operation Roughing Operation Plunge Milling Sweeping Operation 4-Axis Curve Sweeping Operation Pencil Operation Zlevel Operation Contour-driven Operation Isoparametric machining Operation Spiral milling Operation Profile Contouring Operation

Probing Operations

3/5-Axis Converter

Analysing and modifying tool path

NotesThis course is linked to NCI course.


ExercisesEx. 1: Renfort (140min) / All sectorsEx. 2: Recap: Roughing Operations (30min) / All sectorsEx. 3: Isoparametric Machining Operation (30min) / All sectorsEx. 4: Spiral Milling Operation (30min) / All sectorsEx. 5: Machining Features (30min) / All sectorsEx. 6: Profile Contouring Operation (30min) / All sectorsEx. 7: Analyze and Modify a Tool Path (20min) / All sectorsEx. 8: Connecting Rod (60min) / All sectors


MachiningSolutions

STL: STL Rapid Prototyping

EDU-CAT-E-STL-FCourse Code EDU-CAT-E-STL-FCATIA V5R19Brand & Release CATIA V5R190.3 dayDuration 0.3 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-STL-FI-V5R19 Foils: EDU-CAT-E-STL-FF-V5R19 Exercises: EDU-CAT-E-STL-FX-V5R19

ObjectivesUpon completion of this course you will learn how to - Create a triangular mesh from a surface or a solid - Correct, tune, improve a triangular mesh, - Export a mesh as a standard STL file usable for rapid prototyping bystereolithography or any other prototyping technique (FDM, classical 3 axismilling)

Participants' ProfileSurface Designer

PrerequisitesDigitized Shape Editor (DES_F)

Content- Introduction- Creating a mesh from a basic surface- Tuning the mesh- Giving a thickness to the mesh- Optimizing the mesh- Exporting the mesh as an STL file

ExercisesEx. 1: Master Exercise: Portable Vacuum Cleaner (50min) / All sectors



Product Synthesis Solutions


Product SynthesisSolutions

HMN: Human Modeling

EDU-CAT-E-HMN-FCourse Code EDU-CAT-E-HMN-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-HMN-FI-V5R19 Foils: EDU-CAT-E-HMN-FF-V5R19 Exercises: EDU-CAT-E-HMN-FX-V5R19 Detailed Steps: EDU-CAT-E-HMN-FS-V5R19

ObjectivesIn this course you will learn how to use our Human Model technology in orderto leverage your ergonomics analysis. Among other things you will learn how toposition and manipulate the manikin within a V5 Scene. Also you will evaluatethe comfort the reach clearance and the vision of your target population.

Participants' ProfileDesigners, Engineers, Human factors specialists, Any Health specialists, V5Users.

PrerequisitesV5 Digital Mock-up


ContentProduct Overview- Human Builder- Human Measurement Editor- Human Posture Analysis- Human Activity AnalysisIntroduction to Human Tools- General Settings- Useful Keyboard ShortcutsManikin inside a 3D Context- Accessing the Human Builder Workbench- Human Builder - Settings- Human Builder Toolbars- Preparation of a 3D Scenario- Moving and Manipulating Manikins- Kinematics- Creating Links between Manikins and Geometry- Using Catalog- Analyzing Vision- Report Definition- Creating a Reach Envelope and a Swept Volume- Analyzing Clash- Performing a SimulationManikin Body Dimension- Accessing the Human Measurement Editor Workbench- Human Measurements Editor - Accessing the Workbench- Editing the Accommodation- Changing the Anthropometric Variables- Creating Boundary ManikinsPosture Evaluation- Accessing the Human Posture Analysis Workbench- Human Posture Analysis Toolbars- Editing the Range of Motion- Displaying the Postural Score- Gathering and Analyzing the ResultsStandard Ergonomic Analysis- Accessing the Human Activity Analysis Workbench- RULA Analysis- Lift or Lower Analysis- Push or Pull Analysis- Carry Analysis- 3D Biomechanics Analysis

ExercisesEx. 1: Ergonomics Review Inside and Around a Vehicle (6240min) / All sectorsEx. 2: Master Exercise: Analyzing Manikin’s �Anthropometric Variables(180min) / All sectorsEx. 3: Master Exercise: Human Builder (240min) / All sectorsEx. 4: Master Exercise: Evaluating Manikin’s Posture (180min) / All sectorsEx. 5: Master Exercise: Human Activity Analysis (180min) / All sectors



KBE: Knowledge-Based Engineering

EDU-CAT-E-KBE-FCourse Code EDU-CAT-E-KBE-FCATIA V5R19Brand & Release CATIA V5R193 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-KBE-FI-V5R19 Foils: EDU-CAT-E-KBE-FF-V5R19 Exercises: EDU-CAT-E-KBE-FX-V5R19 Detailed Steps: EDU-CAT-E-KBE-FS-V5R19

ObjectivesUpon completion of this course you will be able to:- Become familiar with the knowledgeware working environment, how it can beaccessed, the terminology that will be used and the settings- Create parametric parts and assemblies- Embed knowledge in your designs by controlling it using parameters,formulae, rules, checks and reactions- Create and reuse Power Copies and User-Defined Features- Create and store knowledge-driven design templates so as to instantiatethem in a new context- Create and reuse advanced instantiation features like Knowledge Pattern

Participants' ProfileCATIA V5 Users


Content- Introduction- Knowledge Advisor Workbench Presentation- Creating parameters, Formulas and Lists- Creating Adaptive Behaviors- Creating Design Tables and Part Families- Using Knowledge Advisor Tools- Product Knowledge Template Workbench Presentation- Creating and Using Powercopies- Creating and Using User-defined Features- Creating and Using Part and Assembly Templates- Managing Standard Components- Creating and Using Knowledge Patterns


ExercisesEx. 1: Stringer / All sectorsEx. 2: Knowledge Advisor / All sectorsEx. 3: Keyway / All sectorsEx. 4: User-defined Features / All sectorsEx. 5: Document Templates / All sectorsEx. 6: Jigs and Fixtures / All sectors



KBE: Knowledge-Based Engineering

EDU-CAT-E-KBE-ACourse Code EDU-CAT-E-KBE-ACATIA V5R19Brand & Release CATIA V5R191.5 daysDuration 1.5 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-KBE-AI-V5R19 Foils: EDU-CAT-E-KBE-AF-V5R19 Exercises: EDU-CAT-E-KBE-AX-V5R19 Detailed Steps: EDU-CAT-E-KBE-AS-V5R19

ObjectivesUpon completion of this course you will be able to:- Become familiar with the knowledgeware working environment, the way it canbe accessed, the terminology that will be used and the settings- Embed complex design knowledge in a parametric part using knowledgewareexpert rules, checks and reactions- Automate your design modifications using various knowledgeware experttools- Define, solve and analyze an optimization problem using tools from theCATIA Product Knowledge Engineering workbench

Participants' ProfileCATIA V5 Advanced Users

PrerequisitesCATIA V5 BasicsCATIA V5 Knowledgeware Fundamentals

Content- Introduction to Knowledge Expert- Creating and Using an Expert Rule- Creating and Analyzing an Expert Check- Creating a Rule Base- Product Engineering Optimizer Workbench Presentation- Optimization Problem Formulation- Optimization Problem Resolution- Solution Analysis- Best Practices for Optimization with PEO- Design of Experiments Tools- Constraint Satisfaction Tools


ExercisesEx. 1: Connector / All sectorsEx. 2: LBlock / All sectorsEx. 3: Strap Tension Optimization / All sectorsEx. 4: Bottle / All sectorsEx. 5: Beam Mass Optimization / All sectorsEx. 6: Hanger / All sectorsEx. 7: Fastener / All sectorsEx. 8: Surfacic Structure / All sectorsEx. 9: 1D Beam / All sectorsEx. 10: Silo / All sectorsEx. 11: Design of Experiments / All sectors



KWA: Knowledge Advisor

EDU-CAT-E-KWA-FCourse Code EDU-CAT-E-KWA-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-KWA-FI-V5R19 Foils: EDU-CAT-E-KWA-FF-V5R19 Exercises: EDU-CAT-E-KWA-FX-V5R19 Detailed Steps: EDU-CAT-E-KWA-FS-V5R19

ObjectivesAccess the Knowledgeware working environmentCreate user parameters and formulaeCreate Design Tables and use them to create part familiesCreate reaction features that react to an event such as an updateUse the Macro with Argument featureUse inspection, equations, law and loop tools


PrerequisitesCATIA V5 Basics

ContentThis course you will teach you how to manage Knowledge Advisor objects inorder to embed knowledge within a design. It will teach you how to useknowledge rules to reduce errors and automate modifications.

-Workbench presentation-Creating user parameters and formulas-Defining Checks, Rules, Reactions, Lists, Laws, Loops and macros witharguments-Associating URLs to parameters or relations-Running macros from Rules or Reactions-Using the Knowledge Inspector tool-Managing Design Tables and part family catalogs

ExercisesEx. 1: Wheel Rim (90min) / All sectorsEx. 2: Light Bulb (60min) / All sectorsEx. 3: Sheet Metal Part (30min) / All sectors



KWE: Knowledge Expert

EDU-CAT-E-KWE-FCourse Code EDU-CAT-E-KWE-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-KWE-FI-V5R19 Foils: EDU-CAT-E-KWE-FF-V5R19 Exercises: EDU-CAT-E-KWE-FX-V5R19

ObjectivesUpon completion of this course you will be able to: - Become familiar with the Knowledgeware working environment, how it can beaccessed, the terminology that will be used and the Settings. - Embed complex design knowledge in a parametric part using Knowledgewareexpert rules checks and reactions. - Automate your designs modifications using various Knowledgeware Experttools.

Participants' ProfileCATIA V5 advanced users

PrerequisitesCATIA V5 Basics CATIA V5 Knowledgeware fundamentals

Content- Introduction to Knowledge Expert- Creating and Using an Expert Rule- Creating and Analyzing an Expert Check- Using a Rule Base

ExercisesEx. 1: Connector (40min) / All sectorsEx. 2: LBlock Correction (40min) / All sectors



KWF: Knowledge Fundamentals

EDU-CAT-E-KWF-FCourse Code EDU-CAT-E-KWF-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-KWF-FI-V5R19 Foils: EDU-CAT-E-KWF-FF-V5R19 Exercises: EDU-CAT-E-KWF-FX-V5R19

ObjectivesUpon Completion of this course you will be able to:-Access the knowledgeware working environment-Manage the knowledgeware working environment-See how collaborative work affects knowledge features-Use parameters, formulae and design tables-Create parametric parts and assemblies-Share parameters and re-use relations


PrerequisitesStudents attending this course should have knowledge of CATIAV5 PartDesign and CATIA V5 Assembly Design

Content- Introduction to Common Knowledge Tools- Common Knowledge Tools- Collaborative Work and Knowledge- Stringer Assembly Exercice

ExercisesEx. 1: Bolt and Stringer (20min) / All sectorsEx. 2: Stringer Exercise (30min) / All sectorsEx. 3: Grip Assembly (45min) / All sectorsEx. 4: Stringer Assembly Exercise (60min) / All sectors



PEO: Product Engineering Optimizer

EDU-CAT-E-PEO-FCourse Code EDU-CAT-E-PEO-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PEO-FI-V5R19 Foils: EDU-CAT-E-PEO-FF-V5R19 Exercises: EDU-CAT-E-PEO-FX-V5R19 Detailed Steps: EDU-CAT-E-PEO-FS-V5R19

ObjectivesIn this course, you will learn the functionalities of CATIA Product EngineeringOptimizer (PEO): - Definition of an optimization problem- Specification of the optimization algorithm,- Solving of an optimization problem,- Analyzing and reporting on the results, - Use of the Design of Experiments tool to understand the behavior of a systemthanks to space exploration,- Use of the Constraint Satisfaction tool to solve complex contraint problems(with no objective function)


PrerequisitesCATIA Basics

Content- Workbench Presentation- Optimization Problem Formulation- Optimization problem resolution- Solution analysis- Best practices for optimization with PEO- Design of Experiments tool- Constraint Satisfaction tool

ExercisesEx. 1: Strap tension optimization (90min) / All sectorsEx. 2: Beam mass optimization (30min) / All sectorsEx. 3: Shape optimization: Hanger (40min) / All sectorsEx. 4: Fastener Shape Optimization (30min) / All sectorsEx. 5: Surfacic structure Structural Optimization (20min) / All sectorsEx. 6: Child Swing Structural Optimization (25min) / All sectorsEx. 7: Silo Structural Optimization (30min) / All sectorsEx. 8: Design of experiments (30min) / All sectorsEx. 9: Beam Mass Minimization through Constraint Satisfaction (20min) / Allsectors



PKT: Product Knowledge Template

EDU-CAT-E-PKT-FCourse Code EDU-CAT-E-PKT-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-PKT-FI-V5R19 Foils: EDU-CAT-E-PKT-FF-V5R19 Exercises: EDU-CAT-E-PKT-FX-V5R19 Detailed Steps: EDU-CAT-E-PKT-FS-V5R19

ObjectivesUpon completion of this course you will be able to:- Create and reuse Power Copies and User Defined Features.- Create and reuse advanced instantiation features like Knowledge Pattern.- Create Part and Assembly Templates and reuse them in a new context.


PrerequisitesCATIA V5 FundamentalsCATIA V5 Knowledgeware Basics

ContentThis course you will show how to build up and share corporate knowledgestored in rule bases, and leverage it across the company to ensure designcompliance with established standards.

- Workbench Presentation- Creating and Using Powercopies- Creating and Using User Defined Features- Creating and Using Part and Assembly Templates- Generative Scripts Fundamentals

ExercisesEx. 1: Beam Generation (10min) / All sectorsEx. 2: Support (30min) / All sectors



Shape Design & Styling Solutions


Shape Design & StylingSolutions

ABF: Automotive Body in White Fastening

EDU-CAT-E-ABF-ACourse Code EDU-CAT-E-ABF-ACATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-ABF-AI-V5R19 Foils: EDU-CAT-E-ABF-AF-V5R19 Exercises: EDU-CAT-E-ABF-AX-V5R19

ObjectivesThis course will provide fundamentals for BIW fasteners authoring by usingABF.

Participants' ProfileBIW engineering solution specialist

PrerequisitesGenerative Shape Design, Product Design, Drafting

Content1. Set up the ABF Parameters2. BiW Assembly Preparation3. Load the BiW Fastening Parameters4. Creation of the Fasteners5. Reuse Data6. Check the Fasteners7. Fastened Assembly Documentation8. Reporting and Data Exchange

ExercisesEx. 1: Part preparation (30min) / All sectorsEx. 2: Joint assemblies and joint bodies (15min) / All sectorsEx. 3: Joint element creation (30min) / All sectorsEx. 4: Data check (30min) / AutomotiveEx. 5: Documentation creation (30min) / AutomotiveEx. 6: Data import and export (60min) / All sectorsEx. 7: Underbody fastening master exercise (60min) / All sectorsEx. 8: Standard file customization (30min) / All sectors



CTS: Cloud to Surface

EDU-CAT-E-CTS-ACourse Code EDU-CAT-E-CTS-ACATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesExercises: EDU-CAT-E-CTS-AX-V5R19

ObjectivesUpon completion of this course you will be able to:- Build a surface from a cloud of points, using Digitized Shape Editor for themanagement of the points and FreeStyle and Quick Surface Reconstruction forthe creation of curves and surfaces- Understand the differences of various surface creation methodologies

Participants' ProfileSurface Designers

PrerequisitesDigitized Shape Editor

Content- Cloud data preparation- Surface based approache- Curve based approach- QSR Network approach- QSR Automatic approach- Summary

ExercisesNone



DL1: Developed Shapes

EDU-CAT-E-DL1-FCourse Code EDU-CAT-E-DL1-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-DL1-FI-V5R19 Foils: EDU-CAT-E-DL1-FF-V5R19 Exercises: EDU-CAT-E-DL1-FX-V5R19 Detailed Steps: EDU-CAT-E-DL1-FS-V5R19

ObjectivesUpon completion of this course you will be able to: - Generate unfolded ruled surface - Develop wires and points onto a revolution surface


PrerequisitesStudents attending this course should have knowledge of CATIA V5Fundamentals and Generative Shape Design

ContentUser interface and functionalitiesUser interfaceUnfolded surfacesDevelop wiresExercise PresentationTo Sum Up

ExercisesEx. 1: Water bottle and its support (45min) / All sectors



DSE: Digitized Shape Editor

EDU-CAT-E-DSE-FCourse Code EDU-CAT-E-DSE-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-DSE-FI-V5R19 Foils: EDU-CAT-E-DSE-FF-V5R19 Exercises: EDU-CAT-E-DSE-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Import and process digitized point cloud data- Create tessellated mesh on the point cloud data- Extract characteristic curves from the data- Export the result in the popular file formats�

Participants' ProfileShape Designers

PrerequisitesStudents attending this course should be familiar with the CATIA V5 interface

ContentIntroduction: CATIA Digitized Shape Editor- An Overview of CATIA Digitized Shape Editor- Accessing the Workbench- User Interface: Digitized Shape Editor- Digitized Shape Editor TerminologyPoint Processing- Cloud Import- Cloud Operations- To Sum UpMesh Processing- Mesh Creation- Mesh Correction- Mesh OperationsTo Sum Up- Scans and Curves- Scan Creation- To Sum Up- Curve CreationAdvanced Tasks- Integration of Clouds- Mesh Offset- Cloud Export

ExercisesEx. 1: Hair Dryer (75min) / All sectors



DSS: Shape Sculptor

EDU-CAT-E-DSS-FCourse Code EDU-CAT-E-DSS-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-DSS-FI-V5R19 Foils: EDU-CAT-E-DSS-FF-V5R19 Exercises: EDU-CAT-E-DSS-FX-V5R19

ObjectivesUpon completion of this course you will learn-How to use the Shape Sculptor application-How to import, analyze, enhance meshes-How to modify them by adding details or deforming shapes

Participants' ProfileStyle designers, Modelers


Content- Introduction to CATIA Shape Sculptor - General Tools- Selection and Activation- Creation- Mesh Edition- Modeling Shapes- Terrain Modeling


ExercisesEx. 1: Hairdryer: Import and Analysis (10min) / All sectorsEx. 2: Master Exercise: Dashboard (120min) / All sectorsEx. 3: Bootski: Selection and Mesh (10min) / All sectorsEx. 4: Bike: Modeling Shapes (10min) / All sectors



FSK: FreeStyle Sketch Tracer

EDU-CAT-E-FSK-FCourse Code EDU-CAT-E-FSK-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-FSK-FI-V5R19 Foils: EDU-CAT-E-FSK-FF-V5R19 Exercises: EDU-CAT-E-FSK-FX-V5R19

ObjectivesUpon completion of this course you will be able to: Use an image as a background or as a basis for design Import an image into CATIA V5 Position an image in the CATIA V5 environment

Participants' ProfileShape Designers

PrerequisitesStudents attending this course should have experience in the followingdomain(s): CATIA V5 fundamentals

ContentIntroduction to CATIA Sketch TracerIntroductionAccessing theworkbenchUser Interface: Sketch TracerImporting the Sketches What is Importing a Sketch Why Import a SketchHow to Create an Immersive Sketch How to Create an Immersive Sketch Using Screen ShotModifying theAppearance of a Sketch Manipulating the FocusPositioning the SketchesWhat is Positioning a Sketch ?How to Positiona Sketch Using Cylindrical ViewHow to Position a Sketch Using ConicalViewmanaging Views What is Managing Views ? How to Manage Interactive ViewsHow to Manage Conical Views

What is new in this releaseSea Car exercise modified

ExercisesEx. 1: Master Exercise: Sea Car (20min) / All sectors



FSS: FreeStyle Shaper, Optimizer & Profiler

EDU-CAT-E-FSS-FCourse Code EDU-CAT-E-FSS-FCATIA V5R19Brand & Release CATIA V5R191.5 daysDuration 1.5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-FSS-FI-V5R19 Foils: EDU-CAT-E-FSS-FF-V5R19 Exercises: EDU-CAT-E-FSS-FX-V5R19

ObjectivesIn this course you will learn how to:- Create styled shapes using digitized data- Create surfaces using a curve-based approach- Create surfaces using a surface-based approach - Analyze and correct the curve quality- Analyze and correct the surface quality�


PrerequisitesStudents attending this course should have knowledge of CATIA SurfaceDesign

ContentIntroduction to FreeStyle Shaper- Introduction to FreeStyle Workbench- Accessing the Workbench- Exploring the User Interface- Using the Compass- Using the Visualization Tools- The Tools Dashboard- To Sum UpUsing the Curve-Based Approach- What is Curve Based Approach- Curve Creation- Surface Creation Using Curves- To Sum UpUsing the Surface-Based Approach- What is Surface Based Approach- Basic Concepts and Terminologies- Surface Creation- Surface/Shape Modification- Performing Operations on Surfaces- To Sum UpAnalysis Tools- What is Temporary Analysis- Analyzing Surfaces- Analyzing Curves- Analyzing Using Parametrization- To Sum Up

What is new in this release- Creating a Styling fillet added

ExercisesEx. 1: Master Exercise 1: Sea Car (180min) / All sectors



GSD: Surface Design Expert

EDU-CAT-E-GSD-FCourse Code EDU-CAT-E-GSD-FCATIA V5R19Brand & Release CATIA V5R192 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-GSD-FI-V5R19 Foils: EDU-CAT-E-GSD-FF-V5R19 Exercises: EDU-CAT-E-GSD-FX-V5R19

ObjectivesUpon completion of this course, you will be able to:- Correctly recall the tools of the Generative Shape Design workbench that arecommon to MD2 and HD2 licenses - Identify and use the Generative Shape Design tools that are specific to theHD2 license- Create advanced and parameterized swept surfaces- Perform advanced surfaces analysis and gap correction- Improve geometry quality and stability

Participants' ProfileMechanical Surface Designers

PrerequisitesStudents who are familiar with the basics of wireframe and surfaces creation


ContentIntroduction to Surface Design- Surface Design Workbench Overview- Managing Features and Geometrical Sets- Geometrical Sets - Recommendations- Recap Exercise: Managing Features- Recap Exercise: Shampoo BottleCreating Advanced Wireframe Features- About this Lesson- MD2/GSD Wireframe versus HD2/GSD Wireframe- Creating an Extremum- Creating a Connect Curve- Recap Exercise: Advanced Wireframe GeometryWireframe Analysis and Repair- About this Lesson- Why do you need to Analyze Wireframe Geometry?- Curve Connect Checker- Smoothing Curves- Wireframe Analysis -Recommendations- Recap Exercise: Wireframe Analysis and RepairCreating Advanced Swept Surfaces- About this Lesson- What is a Swept Surface?- Inputs for Sweep- Creating a Swept Surface- Recap Exercise: Knob- Creating an Adaptive Swept Surface- Recap Exercise: Adaptive Swept SurfaceCreating Advanced Blending Surfaces- About this Lesson- What is a Blend?- Types of Blends- Creating Fillets using Hold Curve and Spine- Creating Fillets using Law- Creating a Blend Surface- Blend Surfaces Recommendations- Recap Exercise: Advanced Blending SurfaceSurface Analysis- About this Lesson- Curvature Analysis- Surface Analysis -Recommendations- Recap Exercise: Surface AnalysisAdditional Surface Design Tools- Improving Geometry Stability- Improving Geometry Quality- Checking Molded Parts

What is new in this releaseThis course was updated in order to reflect the main CATIA V5R17enhancements

ExercisesEx. 1: Master Exercise : Mirror Shell (60min) / All sectorsEx. 2: Master Exercise : Mobile Phone (60min) / All sectorsEx. 3: Plastic Bottle Exercise (180min) / All sectorsEx. 4: B-Pillar Exercise (60min) / All sectorsEx. 5: Space Mouse Base Exercise (180min) / All sectorsEx. 6: Lemon Squeezer Exercise (180min) / All sectorsEx. 7: Knob Exercise (15min) / All sectorsEx. 8: Driving Mirror Exercise (50min) / All sectors



GSO: Generative Shape Optimizer

EDU-CAT-E-GSO-FCourse Code EDU-CAT-E-GSO-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-GSO-FI-V5R19 Foils: EDU-CAT-E-GSO-FF-V5R19 Exercises: EDU-CAT-E-GSO-FX-V5R19 Detailed Steps: EDU-CAT-E-GSO-FS-V5R19

ObjectivesUpon completion of the course you will learn to:- Develop Shapes- Morph Shapes- Create Junctions (BIW application) between surfaces- Work with Volumes


PrerequisitesStudents attending this course should have knowledge of:CATIA Surface Design.

ContentIntroduction to Generative Shape Optimizer - Accessing Generative Shape Optimizer - The User InterfaceCreating Offsets: - Variable Offset - Rough OffsetDeveloping Shapes: - Developing wireUsing BiW Tools: - Creating junctions - Creating a Diabolo SeatCreating Advanced Surfaces: - Creating bumped surfaces - Deforming surfaces according to curve wrapping - Deforming surfaces according to surface wrapping - Shape MorphingCreating Volumes - What is a Volume - Types of Volumes - Volumes made from Sketches - Volumes made from Surfaces - Dress-up features on Volumes - Volumes using Boolean operations - Volumes from Operations or Transformations

ExercisesEx. 1: Door Junction (40min) / All sectorsEx. 2: Holding Arm (30min) / All sectorsEx. 3: Torch (40min) / All sectorsEx. 4: Steering Wheel (90min) / All sectors



HD2: Generative Shape Design V5R19 Update

EDU-CAT-E-HD2-UCourse Code EDU-CAT-E-HD2-UCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishUpdateLevel UpdateCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-HD2-UI-V5R19 Foils: EDU-CAT-E-HD2-UF-V5R19

ObjectivesUpon completion of this course you will be able to use the new and enhancedfunctionalities of V5R19 Generative Shape Design workbench

Participants' ProfileCATIA Surface Designers

PrerequisitesGenerative Shape Design V5R18 Course

ContentAuto Fillet- What is an Auto Fillet?- Auto Fillet User Interface- Creating an Auto Fillet- Recap Exercise: Auto FilletEnhancement in the Edge Fillet- About Enhancement in the Edge Fillet- Creating a Blend Corner Using Create by Edges- Creating a Blend Corner Using Create by Vertex- Editing a Blend Corner in the Edge Fillet- Recap Exercise: Edge Fillet with Blend CornerEnhancement in the Blend- About Enhancement in the Blend- Creating a Blend Using Avoid Twist option- Recap Exercise: Blend with Avoid Twist

ExercisesNone



IMA: Imagine & Shape

EDU-CAT-E-IMA-FCourse Code EDU-CAT-E-IMA-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-IMA-FI-V5R19 Foils: EDU-CAT-E-IMA-FF-V5R19 Exercises: EDU-CAT-E-IMA-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Identify and use the tools specific to the Imagine and Shape workbench- Create new product shapes- Improve product styles- Modify the product style surfaces using Shape Design tools

Participants' ProfileProduct Stylists, Industrial Designers

PrerequisitesStudents attending this course should be familiar with the CATIA GenerativeShape Design

ContentIntroduction to CATIA Imagine and Shape- Overview of Imagine and Shape Workbench- Accessing the Workbench- Imagine and Shape User Interface- Imagine and Shape Recommended Settings- Imagine and Shape Common ToolsCurve Modeling- Curve Creation- Curve DeformationSurface Modeling- Creating Basic Surfaces- Manipulating Surfaces- Modifying the TopologyOperations- Editing Multiple Surfaces- Dimensioning a Surface- Associating Elements- Other OperationsImagine and Shape Recommendations- General Methodology- Settings Management- Data Migration- Size Management- Tree Structure Management- Quality Management- Curvature

ExercisesEx. 1: Creating Basic Shapes (20min) / All sectorsEx. 2: Master Exercise: Perfume Bottle (60min) / All sectorsEx. 3: Hair Dryer (100min) / All sectorsEx. 4: Video Projector (80min) / All sectors



MTH: Introduction to the Mathematical Concepts ofCATIA V5

EDU-CAT-E-MTH-ACourse Code EDU-CAT-E-MTH-ACATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-MTH-AI-V5R19 Foils: EDU-CAT-E-MTH-AF-V5R19

ObjectivesUpon completion of this course you will be able to:- Uderstand the mathematical concepts for curve and surface definition inCATIA V5.

Participants' ProfileGSD and/or FreeStyle users

PrerequisitesFreeStyle Fundamentals

Content- The Feature Approach- The Mathematical Level- The Geometry Level of Curves- The Geometry Level for Surfaces- Object Analysis

ExercisesNone



QSR: Quick Surface Reconstruction

EDU-CAT-E-QSR-FCourse Code EDU-CAT-E-QSR-FCATIA V5R19Brand & Release CATIA V5R191 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-QSR-FI-V5R19 Foils: EDU-CAT-E-QSR-FF-V5R19 Exercises: EDU-CAT-E-QSR-FX-V5R19

ObjectivesUpon Completion of this course you will be able to:- Create Scans from point cloud data- Create curves from scans- Create surfaces from scans- Create model and fillet model


PrerequisitesStudents attending this course should have experience in the followingdomain(s):CATIA V5 fundamentals, Digitized Shape Editor and Surface Design

ContentThis course will show you how to reuse tools from Digitized Shape Editorworkbench, and which are the tools specific to QSR. You will learn how scansand curves can be rapidly created on a mesh, and how surfaces can be quicklyderived from the resulting curves.

- Introduction- Creating scans- Creating curves- Creating surfaces- Create curve networks- Automatic processes

ExercisesEx. 1: Plastic Bottle (120min) / All sectorsEx. 2: Car Body (120min) / All sectorsEx. 3: Toy Plastic Part (120min) / All sectorsEx. 4: Washing Powder Bottle (120min) / All sectors



RSO: Realistic Shape Optimizer

EDU-CAT-E-RSO-FCourse Code EDU-CAT-E-RSO-FCATIA V5R19Brand & Release CATIA V5R190.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-RSO-FI-V5R19 Foils: EDU-CAT-E-RSO-FF-V5R19 Exercises: EDU-CAT-E-RSO-FX-V5R19

ObjectivesUpon completion of this course you will be able to:- Deform a surface using the Displacement file resulting from Finite ElementAnalysis

Participants' ProfileSurface designers, Tooling designers

PrerequisitesStudents attending this course should be familiar with the basics of wireframeand surfaces creation

Content- Introduction to Realistic Shape Optimizer - Surface Deformatiob- Exercises - Summary

ExercisesEx. 1: Blade (30min) / All sectorsEx. 2: Stamped Part (30min) / All sectorsEx. 3: Plane Wing (30min) / All sectorsEx. 4: Master Exercise: Plastic Cover (30min) / All sectors



V5S: V5 Surface Design

EDU-CAT-E-V5S-FCourse Code EDU-CAT-E-V5S-FCATIA V5R19Brand & Release CATIA V5R193 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesInstructor Foils: EDU-CAT-E-V5S-FI-V5R19 Foils: EDU-CAT-E-V5S-FF-V5R19

ObjectivesUpon Completion of this course you will be able to: - Understand the GSD workbench - Create good quality curves or improve imported wireframe - Create good quality surfaces based on a sound wireframe geometry - Assemble, relimit and smoothly connect the surfaces to get a topology - Analyze surface quality and heal the defects - Manage surfaces in a multimodel environment

Participants' Profile-Users familiar with CATIA V5 Fundamentals -Users who need to learn how to create advanced Mechanical Surfaces

PrerequisitesStudents attending this course should be familiar with CATIA V5 Fundamentalsand Microsoft Windows Operating System

Content- Introduction to Generative Shape Design- Wireframe Creation- Surface Creation- Surface Re-limitation and Connection- Surface Check Tools- Work in Multi-Model Environment with Surface- Master Project- Additional Exercises

NotesIn addition to the exercises specified just above, this course contains:- Exercises included in the flow of the lessons to make students to manipulateon simple data and get familiar with the tools- Case Study exercises at the end of each lesson to allow students to reviewthe tools seen in the lesson in a more concret set of data

This course also contains CATIA demonstration data including instructions inthe CATParts (3D annotations) to help the teacher to show what has to beshown.These demonstration data are also provided to the students (for lessons 2 to 5)to make the students manipulate while the teacher demonstrates.

ExercisesEx. 1: Master Project: Toy Car (200min) / All sectorsEx. 2: Additional Exercise: Mobile Phone (60min) / All sectorsEx. 3: Additional Exercise: Plastic Bottle (180min) / All sectors


CATIA V5R19 Course Catalog

Documents

Transcript of CATIA V5R19 Course Catalog