Caterpillar Tractor Type Tractors The Educational Services ...Alternator, brushless Batteries, 2...

CATERPILLAR MACHINE PRICE LIST

D6T-GR

D6T TRACK-TYPE TRACTOR Ship Weight LIST PRICE

GRENOBLE, FRANCE lbs AT DEALER

Standard Equipment:

POWERTRAINC9.3 ACERT diesel engineEPA/ARB Tier 4 final and EU stage IVcertified engine with aftertreatmentAir cleaner, strata tube precleanerwith dust ejectionAir filter with electronic serviceindicatorAftercooler, air to air (ATAAC)Coolant, extended lifeFull auto shiftFan, hydraulicFinal drives, single reductionplanetaryFuel priming pump, electricParking brake, electronicRadiator, aluminum bar plateStarting aid, ether, automaticTorque divider, lock-upTransmission, electronically controlledpowershift, 4 speedTurbocharger, wastegateFuel water separatorEcology drain

UNDERCARRIAGECarrier rollersClamp master linkEqualizer barGuards, end track guidingIdlers, center treadRollers, lifetime lubricatedTrack, lifetime lubricatedTrack roller frames, tubularTrack adjusters, hydraulicSprocket rim segments, replaceable

ELECTRICALAlarm, backupAlternator, brushlessBatteries, 2 maintenance free 12V(1400 cca) (24V system), heavy duty

Converter, two 10 Amp 12V outletsConnector, diagnosticStarter, Heavy Duty, 24VHorn, forward warningLight, work, underhood

OPERATOR ENVIRONMENTAir conditioner, ROPS mountedArmrest, adjustableCab, ROPS/FOPS, sound suppressed andpressurizedCup holdersDecelerator and brake pedal

Electro-hydraulics implement &steering controls7" (180mm) full color LCD display(engine coolant, powertrain oil andhydraulic oil temperature, fuel andDEF level and engine RPM/gear displayhours, time and slope indicate)Foot pads, dashHeaterHour meter, electronicMirror, rearviewPowertrain control module-Throttle dial, electronic-Manual shift mode switch-Bi-directional shift dialRadio, AM/FMSeat, cloth, air-suspensionSeatbelt, retractable 3" (76mm)Wipers, two speedGlove box

TECHNOLOGY PRODUCTSCat GRADE with slope assistProduct linkStable blade control (SBC)

OTHER STANDARD EQUIPMENTCD ROM parts bookEngine enclosures, perforatedFront pull deviceGuards, hinged bottomGround level service center withremote electrical disconnect,secondary shutdown switch & hour meterHood, perforatedHydraulics, independent steering,work tool and fan pumpsHydraulics, load sensing, dozer liftand tiltMounting, lift cylinderOil cooler, hydraulicRadiator doors, perforated, louvered,and hingedS.O.S sampling portsVandalism protection for fluidcompartments and battery box

Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green

US-A-19-01 A U. S. DOLLAR CURRENCY D6T-GR-001

Caterpillar Tractor Type Tractors Price Pages 1/2/19 - D6T-GR

The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS

Grounds Equipment Bid #ESCNJ 18/19-25

1 Bid Term: 2/20/19 - 2/19/21


D6T-GR



LANE 2 is reserved for the Base Order Management Program.Please use Lane 2 when placing orders that are part of the BaseOrder Management Program.

2018 YOY list price reductions will be offset by reductions indiscounts or merchandising support.






2 Bid Term: 2/20/19 - 2/19/21


D6T-GR



552-6788 D6T-19A XL TRACTOR DCA5 0 $471,870.................................

LANE 1 - AVAILABLE FROM BALTIMORE PDC

INCLUDES:458-3880 D6T-19A XL TRACTOR313-2673 SWEEPS361-1882 CERT EMISSIONS, EPA/EU375-3356 ALTERNATOR, 150 AMP378-3773 UNDERCARRIAGE, HD, PART GUIDE378-3824 FINAL DRIVE, XL380-8311 OIL CHANGE SYSTEM, HIGH SPEED382-7710 FILM, AFTERTREATMENT, ENGLISH385-2697 TRACK, 610MM / 24" ES HD390-0900 GUARD, BOTTOM, SEALED, HD390-1849 HANDLES, HEAVY DUTY, SWEEPS390-9389 GUARD, FUEL TANK393-3706 SCREEN, REAR433-6933 TOWING DEVICE, PULL-HOOK452-8203 NO REAR ATTACHMENT457-7583 FLUIDS, STD (-37C)458-3878 ACCUGRADE READY458-3918 FAN, AUTO REVERSING462-8456 PRECLEANER, BASIC475-0216 ENGINE475-4771 CYLINDERS, LIFT, STD, XL/XW480-0279 AIR CONDITIONER, ROPS481-4880 BLADE, 6SU XL ARO481-4907 6SU XL BULLDOZER482-7004 FENDER, BASIC482-7006 SEAL GROUP, HIGH DEBRIS486-7003 PRODUCT LINK, CELLULAR PLE641490-0501 HYDRAULICS, WINCH/RIPPER492-4217 BASIC ARRANGEMENT493-6860 FUEL TANK, BASIC497-7892 REGIONAL PACKAGE, US507-6875 CAB STANDARD PACKAGE509-7659 ALARM, BACKUP513-9350 LIGHTS, 8, SWEEPS

MANDATORY ATTACHMENTS:0P-9001 LANE 1 ORDER0G-9236 COMPLETE STORAGE PROTECTION0G-3256 PACK-DISMOUNTED OR N.I. BLADE

OPTIONAL ATTACHMENTS (ONLY AVAILABLE ON A MISCELLANEOUS ORDER):3W-6866 DRAWBAR, RIGID LONG487-3445 6 RIPPER, MULTI-SHANK9J-8926 TOOTH, CURVED (x3)8J-2189 TOOTH, STRAIGHT (x3)






3 Bid Term: 2/20/19 - 2/19/21


D6T-GR



458-3880 D6T-19A XL TRACTOR 0 $400,210......................................

LANE 2 - AVAILABLE FROM GRENOBLE FACTORYLANE 3 - AVAILABLE FROM GRENOBLE FACTORY

Standard base machine XL1880 mm / 74 inch gauge7-roller track frame with carrier rollerAVAILABLE FOR: EU DEALERS

KOREAN DEALERSAUSTRALIAN AND NEW ZEALAND DEALERSJAPANESE DEALERSNORTHERN AMERICAN DEALERS

458-3882 D6T-19A LGP TRACTOR 0 $427,710.....................................

LANE 2 - AVAILABLE FROM GRENOBLE FACTORYLANE 3 - AVAILABLE FROM GRENOBLE FACTORY

Standard base machine LGP2286 mm / 90 inch gauge8 roller track frame with carrier rollerAVAILABLE FOR: EU DEALERS

KOREAN DEALERSAUSTRALIAN AND NEW ZEALAND DEALERSJAPANESE DEALERSNORTHERN AMERICAN DEALERS

458-3884 D6T-19A XW VPAT TRACTOR 0 $414,760.................................

LANE 3 - AVAILABLE FROM GRENOBLE FACTORY

Standard base machine XWVPAT2286 mm / 90 inch gauge8-roller track frame with carrier rollerAVAILABLE FOR: EU DEALERS

KOREAN DEALERSAUSTRALIAN AND NEW ZEALAND DEALERSNORTHERN AMERICAN DEALERS

458-3885 D6T-19A LGP VPAT TRACTOR 0 $430,580................................

LANE 3 - AVAILABLE FROM GRENOBLE FACTORY

Standard base machine LGP VPAT2286 mm / 90 inch gauge8-roller track frame with carrier rollerAVAILABLE FOR: EU DEALERS

KOREAN DEALERSAUSTRALIAN AND NEW ZEALAND DEALERSNORTHERN AMERICAN DEALERS






4 Bid Term: 2/20/19 - 2/19/21


D6T-GR



0G-0581 D6T MISC MATERIAL, GRENOBLE 0 NC..............................

AVAILABLE FROM GRENOBLE FACTORY

Only reference numbers that have the text"ALSO AVAILABLE ON A MISCELLANEOUS ORDER" can be used on a MISC order.

AVAILABLE FOR: EU DEALERSKOREAN DEALERSAUSTRALIAN AND NEW ZEALAND DEALERSJAPANESE DEALERSNORTHERN AMERICAN DEALERS






5 Bid Term: 2/20/19 - 2/19/21


D6T-GR

REF Ship Weight LIST PRICE

USE NO. lbs AT DEALERLANE 2 / 3 MANDATORY

LANE SELECTION

0P-9003 LANE 3 ORDER 0 NC........................................

REGIONAL PACKAGES

L 497-7892 REGIONAL PACKAGE, US 0 NC.................................

INCLUDES:Cold weather starting package,Radio AM/FM/AUX/USB/Bluetooth with microphone,Engine enclosures for sound non-regulated markets,Warning decals, ANSI,Warning decals, Canada.

FILM GROUPThis film includes regional operator instructions for regenerationevents, delayed engine shutdown, and battery disconnect.

L 382-7710 FILM, AFTERTREATMENT, ENGLISH 0 NC.........................

FEATURE PACKAGES

L 492-4217 BASIC ARRANGEMENT 0 NC...................................

ONLY FOR USE WITH: 458-3880 D6T XL TRACTOR458-3881 D6T XW TRACTOR458-3882 D6T LGP TRACTOR

L 492-4222 BASIC ARRANGEMENT, VPAT 0 NC.............................

FOR USE IN LANE 3 ONLYONLY FOR USE WITH: 458-3883 D6T XL VPAT TRACTOR

458-3884 D6T XW VPAT TRACTOR458-3885 D6T LGP VPAT TRACTOR

POWERTRAIN

FINAL DRIVE ARRANGEMENTS

XL SU FINAL DRIVES

L 378-3824 FINAL DRIVE, XL 0 NC.......................................

Includes two basic final drives.ONLY FOR USE WITH: 458-3880 D6T XL TRACTOR

492-4217 BASIC ARRANGEMENT

XL VPAT FINAL DRIVE






6 Bid Term: 2/20/19 - 2/19/21


D6T-GR



POWERTRAIN (CONT.)

FINAL DRIVE ARRANGEMENTS (Cont.)

L 378-3833 FINAL DRIVE, XL VPAT 0 NC..................................

FOR USE IN LANE 3 ONLYIncludes two basic final drives.ONLY FOR USE WITH: 458-3883 D6T XL VPAT TRACTOR

492-4222 BASIC ARRANGEMENT, VPAT

XW S/SU FINAL DRIVE

L 378-3827 FINAL DRIVE, XW 0 NC......................................

FOR USE IN LANE 3 ONLYIncludes two basic final drives.ONLY FOR USE WITH: 458-3881 D6T XW TRACTOR


XW VPAT FINAL DRIVES

L 378-3830 FINAL DRIVE, XW/LGP 0 NC..................................

Includes two basic final drives.ONLY FOR USE WITH: 458-3884 D6T XW VPAT TRACTOR


LGP S FINAL DRIVES


Includes two basic final drives.ONLY FOR USE WITH: 458-3882 D6T LGP TRACTOR


LGP VPAT FINAL DRIVE


Includes two basic final drives.ONLY FOR USE WITH: 458-3885 D6T LGP VPAT TRACTOR


ENGINES

L 475-0212 ENGINE, BASIC 0 NC........................................

Standard engine.

ENGINE AIR PRECLEANERS

L 462-8456 PRECLEANER, BASIC 0 NC....................................

CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE






7 Bid Term: 2/20/19 - 2/19/21


D6T-GR



POWERTRAIN (CONT.)

ENGINE AIR PRECLEANERS (Cont.)

L 464-3634 PRECLEANER, WITH SCREEN 0 $1,375..............................

FOR USE IN LANE 3 ONLYINCLUDES SCREEN. For use in heavy debris applications, such aslandfills and woodchip piles. May improve filter life. Removesstrata-tube precleaner. OPTIMAX dual-stage precleaner poweredsby engine�s intake and exhaust air flows. Intake air is spun byflow-driven impeller. Debris stratify along outer wall and areejected back into environment. Any remaining contaminants arecollected and removed by secondary scavenger system, allowing onlyprecleaned air to continue to engine�s air filter.INCLUDED IN: 492-4229 WASTE HANDLING PACKAGE

MAINTENANCE AND RELATED ATTACHMENTS

L 382-4250 OIL DRAIN, BASIC 0 NC......................................

L 380-8311 OIL CHANGE SYSTEM, HIGH SPEED 0 $875........................

Easy access drain line and Wiggins connector for remote engine andpowertrain oil drain. Provides quick, clean and easy oil changeswithout having to climb under the machine to access a gravity drain.






8 Bid Term: 2/20/19 - 2/19/21


D6T-GR



UNDERCARRIAGE

Customers should carefully select between SystemOne and Heavy Dutyundercarriage based on expected application. Please refer to theUndercarriage Selection and Application Guide.

SystemOne Undercarriage is recommended for use in applicationswhere moderate to high abrasive underfoot conditions exist.

Due to the potential increase in undercarriage life resulting fromSystemOne, Extreme Service (ES) shoes should be considered forapplications that are anticipated to be shoe-life limited in orderto match shoe life with link life.

Track guide guards provide improved protection to track, rollerand end guides. Partial guide guards are recommended in applicationswith sideslopes greater than 4:1 but less than 2:1 and/or applicationswith objects between 1" and 3" in size (25 to 75 mm).Full length guide guards arerecommended for applications withsideslopes greater than 2:1, and/orapplications with objectsexceeding 3" in size (75 mm).

Based on the Undercarriage Application Guide, some applications willrequire quad-track. To fulfill this need, a quad-trackattachment is available that provides track shoes pre-drilled forinstallation of the additional track link assembly at the dealershipor customer location.

XL SU SYSTEMONE UNDERCARRIAGES

L 378-3769 UNDERCARRIAGE, S1, PART GUIDE 0 $10,390.........................

Includes SystemOne undercarriage components and two center trackguiding guards.ONLY FOR USE WITH: 458-3880 D6T XL TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 378-3770 UNDERCARRIAGE, S1, FULL GUIDE 0 $15,460..........................

FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and full length guidingguards.ONLY FOR USE WITH: 458-3880 D6T XL TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

XL SU HEAVY DUTY UNDERCARRIAGES

L 378-3772 UNDERCARRIAGE, HD 0 NC...................................

FOR USE IN LANE 3 ONLYIncludes Heavy Duty Undercarriage Components.ONLY FOR USE WITH: 458-3880 D6T XL TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE






9 Bid Term: 2/20/19 - 2/19/21


D6T-GR



UNDERCARRIAGE (CONT.)

XL SU HEAVY DUTY UNDERCARRIAGES (Cont.)

L 378-3773 UNDERCARRIAGE, HD, PART GUIDE 0 $4,280.........................

FOR USE IN LANE 3 ONLYIncludes Heavy Duty Undercarriage Components and two center trackguide guards and higher flange track guiding rollers in all positionsexcept end rollers.ONLY FOR USE WITH: 458-3880 D6T XL TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 378-3774 UNDERCARRIAGE, HD, FULL GUIDE 0 $4,725.........................

FOR USE IN LANE 3 ONLYIncludes Heavy Duty Undercarriage Components, full length heavyduty cast steel track roller guiding guards and higher flange trackguiding rollers in all positions except end rollers.ONLY FOR USE WITH: 458-3880 D6T XL TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

XL SU FINEGRADING UNDERCARRIAGES

L 436-5555 UNDERCARRIAGE XL, S1, FINEGRAD 419 $5,740......................

FOR USE IN LANE 3 ONLYFINE GRADING WORK ONLY. NOT for heavy duty applications such as landcleaning, rock work nor significant side sloping applications.Includes Standard gauge, 8-roller track frame, center section trackframe.REQUIRES: 385-2692 TRACK, 610MM/24" MS S1

507-9857 6SU XL BULLDOZER, FINEGRADING475-4772 CYLINDERS, LIFT, STANDARD

ONLY FOR USE WITH: 458-3880 D6T XL TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

GRADE W/3D

XL VPAT SYSTEMONE UNDERCARRIAGES


FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and two center trackguiding guards.ONLY FOR USE WITH: 458-3883 D6T XL VPAT TRACTOR


FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and full length guidingguards.ONLY FOR USE WITH: 458-3883 D6T XL VPAT TRACTOR






10 Bid Term: 2/20/19 - 2/19/21


D6T-GR




XL VPAT HEAVY DUTY UNDERCARRIAGES


FOR USE IN LANE 3 ONLYIncludes Heavy Duty Undercarriage components.ONLY FOR USE WITH: 458-3883 D6T XL VPAT TRACTOR


FOR USE IN LANE 3 ONLYIncludes two center track guide guards and higher flange track guidingrollers in all positions except end rollers.ONLY FOR USE WITH: 458-3883 D6T XL VPAT TRACTOR


FOR USE IN LANE 3 ONLYIncludes full length heavy duty cast steel track roller guiding guardsguards.ONLY FOR USE WITH: 458-3883 D6T XL VPAT TRACTOR

XW SU SYSTEMONE UNDERCARRIAGES


FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and two center trackguiding guards.ONLY FOR USE WITH: 458-3881 D6T XW TRACTOR


FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and full length guidingguards.ONLY FOR USE WITH: 458-3881 D6T XW TRACTOR

XW SU HEAVY DUTY UNDERCARRIAGES


FOR USE IN LANE 3 ONLYIncludes Heavy Duty Undercarriage componentsONLY FOR USE WITH: 458-3881 D6T XW TRACTOR


FOR USE IN LANE 3 ONLYIncludes two center track guide guard and higher flange trackguiding rollers in all positions except end rollers.ONLY FOR USE WITH: 458-3881 D6T XW TRACTOR


FOR USE IN LANE 3 ONLYIncludes full length heavy duty cast steel track roller guiding guardsand higher flange track guiding rollers in all positions except endrollers.ONLY FOR USE WITH: 458-3881 D6T XW TRACTOR






11 Bid Term: 2/20/19 - 2/19/21


D6T-GR




XW VPAT / LGP VPAT SYSTEMONE UNDERCARRIAGES

L 381-2593 UNDERCARRIAGE, S1, CTR GUIDE 0 $10,730..........................

FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and one center track guideguard.ONLY FOR USE WITH: 458-3884 D6T XW VPAT TRACTOR

458-3885 D6T LGP VPAT TRACTOR


FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and two center track guideguards.ONLY FOR USE WITH: 458-3884 D6T XW VPAT TRACTOR



FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and full length guidingguards.ONLY FOR USE WITH: 458-3884 D6T XW VPAT TRACTOR


XW VPAT / LGP VPAT HEAVY DUTY UNDERCARRIAGES

L 449-9137 UNDERCARRIAGE, HD, CTR GUIDE 0 NC..........................

FOR USE IN LANE 3 ONLYIncludes one center track guide guard.ONLY FOR USE WITH: 458-3884 D6T XW VPAT TRACTOR



FOR USE IN LANE 3 ONLYIncludes two center track guide guards and higher flange track guidingrollers in all positions except end rollers.ONLY FOR USE WITH: 458-3884 D6T XW VPAT TRACTOR



FOR USE IN LANE 3 ONLYIncludes full length track guide guards and higher flange trackguiding rollers in all positions except end rollers.ONLY FOR USE WITH: 458-3884 D6T XW VPAT TRACTOR


LGP S SYSTEMONE UNDERCARRIAGES

L 449-9128 UNDERCARRIAGE, S1, CTR GUIDE 0 $16,250..........................

FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and one center track guideguard.ONLY FOR USE WITH: 458-3882 D6T LGP TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE






12 Bid Term: 2/20/19 - 2/19/21


D6T-GR




LGP S SYSTEMONE UNDERCARRIAGES (Cont.)


Includes SystemOne undercarriage components and two center track guideguards.ONLY FOR USE WITH: 458-3882 D6T LGP TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE


FOR USE IN LANE 3 ONLYIncludes SystemOne undercarriage components and full length guidingguards.ONLY FOR USE WITH: 458-3882 D6T LGP TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

LGP S HEAVY DUTY UNDERCARRIAGES

L 449-9131 UNDERCARRIAGE, HD, CTR GUIDE 0 NC..........................

Includes one center track guide guard.ONLY FOR USE WITH: 458-3882 D6T LGP TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE


FOR USE IN LANE 3 ONLYIncludes two center track guide guard and higher flange track guidingrollers in all positions except end rollers.ONLY FOR USE WITH: 458-3882 D6T LGP TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE


FOR USE IN LANE 3 ONLYIncludes full length, heavy duty cast steel track roller guidingguards and higher flange track guiding rollers in all positionsexcept for end rollers.ONLY FOR USE WITH: 458-3882 D6T LGP TRACTORCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

TRACK GROUPS

XL SU, TRACK PAIRS (41 SECTIONS)

L 385-2688 TRACK, 560MM / 22" MS S1 0 $296.............................

FOR USE IN LANE 3 ONLYL 384-1713 TRACK, 560MM / 22" ES S1 7,449 $2,130.........................

L 385-2693 TRACK, 610MM / 24" MS S1 0 $1,190.............................


FOR USE IN LANE 3 ONLYL 385-2699 TRACK, 610MM / 24" ES CTR, S1 0 $4,505.........................

FOR USE IN LANE 3 ONLYSystemOne center hole.






13 Bid Term: 2/20/19 - 2/19/21


D6T-GR




TRACK GROUPS (Cont.)

L 385-2689 TRACK, 560MM / 22" MS HD 6,689 NC........................

FOR USE IN LANE 3 ONLYL 385-2691 TRACK, 560MM / 22" ES HD 7,361 $1,845.........................

FOR USE IN LANE 3 ONLYL 385-2698 TRACK, 610MM / 24" ES TRAP HD 7,635 $4,215.....................

FOR USE IN LANE 3 ONLYHD trapezoidal holes.RECOMMENDED with Waste Handling Package

L 385-2697 TRACK, 610MM / 24" ES HD 0 $2,910.............................

FOR USE IN LANE 3 ONLYExtreme service shoes. Heavy duty.

XL SU FINEGRADING, TRACK PAIRS (45 sections)

L 385-2692 TRACK, 610MM / 24" MS S1 0 $-1,665.............................

FOR USE IN LANE 3 ONLY

XL VPAT, TRACK PAIRS (41 sections)

L 385-2688 TRACK, 560MM / 22" MS S1 0 $296.............................


FOR USE IN LANE 3 ONLYL 385-2689 TRACK, 560MM / 22" MS HD 6,689 NC........................

FOR USE IN LANE 3 ONLYL 385-2691 TRACK, 560MM / 22" ES HD 7,361 $1,845.........................


XW SU, TRACK PAIRS (41 sections)

L 385-2693 TRACK, 610MM / 24" MS S1 0 $1,190.............................


FOR USE IN LANE 3 ONLYL 385-5463 TRACK, 710MM / 28" MS S1 0 $-605.............................

FOR USE IN LANE 3 ONLYL 385-5464 TRACK, 760MM / 30" MS S1 0 $297.............................

FOR USE IN LANE 3 ONLYL 385-5466 TRACK, 760MM / 30" ES S1 0 $2,800..............................

FOR USE IN LANE 3 ONLYL 385-5465 TRACK, 760MM / 30" MS HD 0 NC.............................

FOR USE IN LANE 3 ONLY.

XW VPAT, TRACK PAIRS (45 sections)

L 385-7768 TRACK, 710MM / 28" MS S1 0 $314.............................

FOR USE IN LANE 3 ONLYL 385-7775 TRACK, 710MM / 28" ES S1 0 $2,880..............................







14 Bid Term: 2/20/19 - 2/19/21


D6T-GR




TRACK GROUPS (Cont.)

L 385-2684 TRACK, 710MM / 28" ES HD 0 $5,070.............................


LGP S, TRACK PAIRS (45 sections)

L 385-7758 TRACK, 915MM / 36" MS S1 0 $317.............................

L 385-7760 TRACK, 915MM / 36" ES S1 10,961 $3,620.........................

L 385-7759 TRACK, 915MM / 36" MS HD 9,786 NC.........................

L 385-7757 TRACK, 760MM / 30" ES TRAP HD 0 $1,455.........................

FOR USE IN LANE 3 ONLYExtreme service shoes. Heavy duty. Includes trapezoidal holes.RECOMMENDED with Waste Handling Package

L 385-7762 TRACK, 915MM / 36" ES TRAP HD 10,803 $8,660....................

FOR USE IN LANE 3 ONLYHD trapezoidal holes.RECOMMENDED with Waste Handling Package

L 385-7764 TRACK, 990MM/39" SELF-CLEAN HD 9,530 $28,230...................

LGP VPAT, TRACK PAIRS (45 Sections)

L 385-7767 TRACK,790MM / 31" MS OFFSET S1 0 $321.......................

FOR USE IN LANE 3 ONLYOffset / MS tracks.

L 385-7771 TRACK,790MM / 31" MS OFFSET HD 0 NC.......................

FOR USE IN LANE 3 ONLYOffset / MS tracks.

HYDRAULICS

REAR ATTACHMENT HYDRAULICS & CONTROLS

NON-VPAT REAR IMPLEMENTS HYDRAULICS

L 490-0470 NO REAR HYDRAULICS 0 NC..................................

FOR USE IN LANE 3 ONLYEXCEPTIONALLY ALSO AVAILABLE IN LANE 2 FOR JAPAN (STANDARD BOM ORDERS)CANNOT BE USED WITH:487-3445 6 RIPPER, MULTI-SHANK

371-0953 PA56 WINCH PACKAGE, STD SPEED371-0954 PA56 WINCH PACKAGE, SLOW SPEED

L 490-0496 HYDRAULICS, RIPPER 0 $3,100....................................

EXCEPTIONALLY AVAILABLE ONLY IN LANE 3 FOR JAPANIncludes lines, ripper control valve, and ripper control.CANNOT BE USED WITH:371-0953 PA56 WINCH PACKAGE, STD SPEED

371-0954 PA56 WINCH PACKAGE, SLOW SPEED






15 Bid Term: 2/20/19 - 2/19/21


D6T-GR



HYDRAULICS (CONT.)

REAR ATTACHMENT HYDRAULICS & CONTROLS (Cont.)

L 490-0501 HYDRAULICS, WINCH/RIPPER 0 $4,240..............................

FOR USE IN LANE 3 ONLYIncludes ripper lines, ripper control valve and combined ripper andwinch control. Allows for the factory installation of eithera ripper or a PA56 winch.

VPAT REAR IMPLEMENTS HYDRAULICS

L 490-0475 NO REAR HYDRAULICS, VPAT 0 NC.............................

FOR USE IN LANE 3 ONLYCANNOT BE USED WITH:487-3445 6 RIPPER, MULTI-SHANK

371-0953 PA56 WINCH PACKAGE, STD SPEED371-0954 PA56 WINCH PACKAGE, SLOW SPEED

L 490-0497 HYDRAULICS, RIPPER, VPAT 0 $3,100..............................

FOR USE IN LANE 3 ONLYIncludes lines ripper control valve, and ripper control.CANNOT BE USED WITH:371-0953 PA56 WINCH PACKAGE, STD SPEED

371-0954 PA56 WINCH PACKAGE, SLOW SPEED

L 490-0513 HYDRAULICS, WINCH/RIPPER, VPAT 0 $4,240........................

Includes ripper lines, ripper control valve and combined ripper andwinch control. Allows for the factory installation of eithera ripper or a PA56 winch.

HYDRAULIC FAN

L 458-3917 FAN, BASIC 0 NC..........................................

Hydraulically driven demand fan with a hydraulic valve that allowsfor reduced fan speed to improve cold weather performance.CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 458-3918 FAN, AUTO REVERSING 0 $1,800..................................

Hydraulically driven, auto-reversing fan which changes directionautomatically to purge debris from radiator and enclosures.Also includes a hydraulic valve that allows for reduced fan speedto improve cold weather performance.INCLUDED IN: 492-4229 WASTE HANDLING PACKAGE

STARTERS, BATTERIES, & ALTERNATORS

ALTERNATORS

L 375-3356 ALTERNATOR, 150 AMP 0 NC.................................

CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 463-8636 ALTERNATOR, 150 AMP, DUCTED 0 $675..........................

Ducted version recommended in debris laden environment.INCLUDED IN: 492-4229 WASTE HANDLING PACKAGE






16 Bid Term: 2/20/19 - 2/19/21


D6T-GR



ELECTRICAL

LIGHTING GROUP

L 513-9345 LIGHTS, 6, BASIC 0 $1,975......................................

2 lights mounted on the radiator guard facing forward, 2 lightsmounted on the cab facing forward, and 2 lights mounted on the ROPS,facing rearward.REQUIRES : WIRING GRADE W/3D if the machine is equipped with a gradecontrol. Two wiring attachments are available as options, depending onthe S/SU or VPAT machine configuration.CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 513-9357 LIGHTS, 6, BASIC, REAR SCREEN 0 $1,975..........................

FOR USE IN LANE 3 ONLY2 lights mounted on the radiator guard facing forward, 2 lightsmounted on the cab facing forward, and 2 lights mounted to the rearscreen facing rearward.REQUIRES : WIRING GRADE W/3D if the machine is equipped with a gradecontrol. Two wiring attachments are available as options, depending onthe S/SU or VPAT machine configuration.REQUIRES: 393-3706 SCREEN, REARCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 513-9346 LIGHTS, 10, PREMIUM 0 $3,300..................................

Provides 4 lights mounted on TOP of dozer lift cylinders facingforward, 2 mounted on ROPS facing forward, 4 mounted on ROPSfacing rearward. Also includes underhood light.

L 513-9358 LIGHTS, 10,PREMIUM,REAR SCREEN 0 $3,300........................

FOR USE IN LANE 3 ONLYProvides 4 lights mounted on top of dozer lift cylinders facingforward, 2 mounted on cab facing forward, 4 lights mounted to therear screen facing rearward. Also includes underhood light.REQUIRES: 393-3706 SCREEN, REAR

L 513-9350 LIGHTS, 8, SWEEPS 0 $2,755....................................

FOR USE IN LANE 3 ONLYProvides 4 guarded lights on front of sweeps facing forward, 2 lightsmounted on sweeps near the top of the cab facing forward and 2 lightsmounted to the rear screen facing rearward. Also includesunderhood light.REQUIRES : WIRING GRADE W/3D if the machine is equipped with a gradecontrol. Two wiring attachments are available as options, depending onthe S/SU or VPAT machine configuration.REQUIRES: 313-2673 SWEEPS and

393-3706 SCREEN, REARCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE






17 Bid Term: 2/20/19 - 2/19/21


D6T-GR



OPERATOR ENVIRONMENT

CAB PACKAGESAll cabs are rear-camera ready. The camera itself needs to beseparately selected from the optional section of this price list.

L 507-6875 CAB STANDARD PACKAGE 0 NC...............................

Includes standard cab and air suspension seat.

L 518-2915 CAB COMFORT PACKAGE 0 $1,680................................

Includes standard cab and air suspension, heated and ventilated seat.

L 518-3820 CAB COMFORT PACKAGE, ENHANCED 0 $7,740.......................

FOR USE IN LANE 3 ONLYIncludes :-Enhanced cab with higher pressurization for improved air quality industy applications. Includes a power precleaner & dual pane glass andhigh efficiency filter which reduces system maintenance intervals,-Air suspension, heated and ventilated seat.RECOMMENDED WITH WASTE HANDLING PACKAGECANNOT BE USED WITH:GRADE W/3D

426-0970 LIGHT, WARNING, STROBE W/PLATE313-2673 SWEEPS

TECHNOLOGY PRODUCTS

MACHINE CONTROL OPTIONS

ACCUGRADE

For a complete AccuGrade ready machine, you must order the AccuGradeReady attachment (ARO). AccuGrade blade mounts are standard on allblades unless otherwise stated.

NON VPAT Controls

L 457-7668 CONTROL, BASIC 0 NC......................................

FOR USE IN LANE 3 ONLYControl group for machines without Accugrade technology.

L 458-3878 ACCUGRADE READY 0 $5,640....................................

Includes brackets and hardware for the complete installation of theAccuGrade system components including the PM400 module.Supports blade-mounted dual GPS receivers forfully automated blade control.

VPAT Controls






18 Bid Term: 2/20/19 - 2/19/21


D6T-GR



TECHNOLOGY PRODUCTS (CONT.)

MACHINE CONTROL OPTIONS (Cont.)

L 457-7669 CONTROL, BASIC, VPAT 0 NC.................................

FOR USE IN LANE 3 ONLYControl group for VPAT machines without Accugrade technology.

L 458-3879 ACCUGRADE READY, VPAT 0 $5,640...............................

FOR USE IN LANE 3 ONLYIncludes brackets and hardware for the complete installation of theAccuGrade system components including the PM400 module.Supports blade-mounted dual GPS receivers forfully automated blade control.

GRADE WITH 3D

Cat Grade Control 3D is a factory installed, chassis mounted gradecontrol system that moves blade mounted grade control components tothe top of the cab. Includes a Cat Grade Control 3D display, factoryenabled SEA, dual mounted receivers and dual mounted GNSS antennas.Requires an "off-board" radio network and GPS base station to befunctional. Additional requirements via SITECH dealer includeon-board data radio and measure up and calibration.Dealer must meet specific "market ready" requirements. Contactyour Caterpillar Technology or Sales Representative before ordering.

NON VPAT Controls

L 462-7660 GRADE W/3D 0 $43,870.........................................

REQUIRES: 475-4773 CYLINDERS, LIFT, GRADE W/3D (XL, XW)475-4774 CYLINDERS, LIFT, GRADE W/3D (LGP)482-7066 WIRING, GRADE W/3D, only if 6 or 8 lights installed(no need of this wiring if 10 lights installed).

CANNOT BE USED WITH:436-5555 UNDERCARRIAGE XL, S1, FINEGRAD518-3820 CAB COMFORT PACKAGE, ENHANCED503-4187 BLADE, 6SU XL NARROW

VPAT Controls

L 462-7661 GRADE W/3D, VPAT 0 $43,870....................................

FOR USE IN LANE 3 ONLYREQUIRES: 481-4914 VPAT XL DOZER PKG, GRADE W/3D, or

481-4916 VPAT XW/LGP DZR PKG,GRADE W/3D, or523-3930 VPAT XW/LGP DZR,FLD,GRADE W/3D,and458-3018 WIRING, GRADE W/3D, VPAT, only if 6 or 8 lightsinstalled (no need of this wiring if 10 lights installed).

CANNOT BE USED WITH:518-3820 CAB COMFORT PACKAGE, ENHANCED






19 Bid Term: 2/20/19 - 2/19/21


D6T-GR



TECHNOLOGY PRODUCTS (CONT.)

PRODUCT LINK

Product Link enables the remote transmission of information about thelocation, operation, and condition of your equipment. Efficiently andeffectively monitor performance of your assets to help keep your jobson schedule, maintain equipment condition, and reduce the costs ofowning and operating your fleet. Availability varies by country.Please reference https://Dealer.cat.com/PL/Certification for certifiedcountries.Please contact your Cat marketing representative with questions.

For a CELLULAR-ONLY technology, please select the cellular productlink attachment only.For a SATELLITE-ONLY or DUAL technology, please select the cellularproduct link attachment and make sure to ADD the satellite reference.

L 486-7003 PRODUCT LINK, CELLULAR PLE641 0 NC.........................

Product Link Elite series PLE641 offers expanded coverage including3G UMTS and CDMA2000 as well as 2G GSM and CDMA cellular networks totransmit location, utilization and condition information for viewingin Product Link-s remote monitoring web interface. Cellular technologyprovides capabilities for frequent transmission and larger volumes ofdata.

L 486-7001 PRODUCT LINK, SATELLITE PLE631 0 $432.........................

Product Link Elite series PLE631 uses a satellite network to transmitlocation, utilization and condition information for viewing in ProductLink�s remote monitoring web interface. For use in areas with poor orno cellular coverage.REQUIRES: 486-7003 PRODUCT LINK, CELLULAR PLE641

SAFETY AND SECURITY

BACK-UP ALARM

L 509-7659 ALARM, BACKUP 0 NC.......................................

Back-up alarm mounted to the bottom face of the fuel tank.CANNOT BE USED WITH:514-0441 STRIKER BAR BOX, REAR

514-0443 STRIKER BAR BOX, REAR

L 509-7660 ALARM, BACKUP, GUARDED 0 $250..............................

FOR USE IN LANE 3 ONLYBack-up alarm mounted to the rear face of the fuel tank guardand guarded with metal plates and wire mesh guarding.REQUIRES: Fuel tank guardONLY FOR USE WITH: 514-0441 STRIKER BAR BOX, REAR







20 Bid Term: 2/20/19 - 2/19/21


D6T-GR



FUEL SYSTEMS

FUEL TANK

L 493-6860 FUEL TANK, BASIC 0 NC.....................................

Provides standard fuel tank.

L 494-2343 FUEL TANK, FF & REFILL READY 0 $1,010............................

Provides fuel tank with openings for either the fast fillsystem or the refilling pump.REQUIRES: 439-6270 COVER, or

439-6269 FUEL SYSTEM, FAST FILL, or439-6271 REFILLING FUEL PUMP

GUARDS

BOTTOMS GUARDS

L 388-2648 GUARD, BOTTOM 0 NC......................................

INCLUDES: HITCH, FRONTCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 390-0900 GUARD, BOTTOM, SEALED, HD 0 $2,075...........................

Includes Heavy Duty and Sealed Bottom Guards.REQUIRES: HITCH or PULL HOOK, FRONTINCLUDED IN: 492-4229 WASTE HANDLING PACKAGE

OTHER ATTACHMENTS

FENDER

NON VPAT

L 482-7004 FENDER, BASIC 0 NC........................................

ONLY FOR USE WITH: 493-6860 FUEL TANK, BASIC

L 493-7291 FENDER, BASIC, FAST FILL READY 0 NC.........................

ONLY FOR USE WITH: 494-2343 FUEL TANK, FF & REFILL READY

VPAT

L 482-7005 FENDER, BASIC, VPAT 0 NC..................................

FOR USE IN LANE 3 ONLYONLY FOR USE WITH: 493-6860 FUEL TANK, BASIC

L 493-7295 FENDER, BASIC, FF READY, VPAT 0 NC.........................

FOR USE IN LANE 3 ONLYONLY FOR USE WITH: 494-2343 FUEL TANK, FF & REFILL READY






21 Bid Term: 2/20/19 - 2/19/21


D6T-GR



OTHER ATTACHMENTS (CONT.)

REAR ATTACHMENTSWhen a VPAT bulldozer is ordered, it is recommended to equip themachine with a ripper, winch or other counterweights to reach theoptimum balance of the machine.

P 487-3445 6 RIPPER, MULTI-SHANK 0 $22,880.................................

0 $22,880 NIDOES NOT INCLUDE RIPPER SHANKS THAT MUST BE ORDERED SEPARATELY.Parallelogram ripper. Can accomodate 3 teeth. Rear mounted.This ripper is not intended for normal ripping applications wheninstalled on the LGP. It is intended for scarifying hard soilonly when used with the LGP.AVAILABLE INSTALLED OR NOT INSTALLEDALSO AVAILABLE ON A MISCELLANEOUS ORDERREQUIRES: 9J-8926 TOOTH, CURVED

8J-2189 TOOTH, STRAIGHTTeeth will be ordered Installed if the ripper is Installed,they will be ordered Not Installed if ripper Not Installed.

ONLY FOR USE WITH: 490-0496 HYDRAULICS, RIPPER, or490-0501 HYDRAULICS, WINCH/RIP, or490-0497 HYDRAULICS, RIPPER, VPAT, or490-0513 HYDRAULICS, WINCH/RIP, VPATand509-7659 ALARM, BACKUP

L 3W-6866 DRAWBAR, RIGID LONG 256 $1,440...............................

ONLY FOR USE WITH: 509-7659 ALARM, BACKUP

L 514-0441 STRIKER BAR BOX, REAR 0 $14,020.................................

FOR USE IN LANE 3 ONLYIncludes drawbar and storage area. Mounts to rear of machine andhelps protect fenders and other sheet metal from debris carriedby tracks.RECOMMENDED with Waste Handling Package.Additional counterweights (minimum of 2) recommended if ordered withwaste handling arrangements.RECOMMENDED WITH WASTE HANDLING PACKAGEONLY FOR USE WITH: 458-3880 D6T XL TRACTOR, or

458-3881 D6T XW TRACTOR, or458-3883 D6T XL VPAT TRACTOR,and490-0470 NO REAR HYDRAULICS,or490-0475 NO REAR HYDRAULICS, VPAT,and509-7660 ALARM, BACKUP, GUARDED






22 Bid Term: 2/20/19 - 2/19/21


D6T-GR




REAR ATTACHMENTS (Cont.)

L 514-0443 STRIKER BAR BOX, REAR 0 $14,100.................................

FOR USE IN LANE 3 ONLYIncludes drawbar and storage area. Mounts to rear of machine andhelps protect fenders and other sheet metal from debris carriedby tracks.RECOMMENDED with Waste Handling Package.Additional counterweights (minimum of 2) recommended if ordered withwaste handling arrangementsREQUIRES: Back-up alarm, guardedONLY FOR USE WITH: 458-3882 D6T LGP TRACTOR, or

458-3884 D6T XW VPAT TRACTOR, or458-3885 D6T LGP VPAT TRACTOR,and490-0470 NO REAR HYDRAULICS,or490-0475 NO REAR HYDRAULICS, VPAT,and509-7660 ALARM, BACKUP, GUARDED

L 452-8203 NO REAR ATTACHMENT 0 NC.................................

This reference must be selected only when the dealer wants to installhis own rear attachments at the dealership or in the field.In any case, the machine must be sold to the final customer with anappropriate rear attachment (drawbar, ripper, winch, counterweight) toreach the optimum balance of the complete machine.Orders with this no rear attachment will be accepted by the factoryonly if the final rear configuration is explained and justified witha note in the MSO. Please check the global configuration of themachine is consistent with the intended rear equipment.

GRAB HANDLES

NON VPAT

L 390-1847 HANDLES, BASIC 0 NC......................................

CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE313-2673 SWEEPS

L 390-1848 HANDLES, HEAVY DUTY 0 $940.................................

FOR USE IN LANE 3 ONLYIncreased strength grab irons to resist damage caused by debrisin landfill or other severe applications.CANNOT BE USED WITH:313-2673 SWEEPSINCLUDED IN: 492-4229 WASTE HANDLING PACKAGE

L 390-1849 HANDLES, HEAVY DUTY, SWEEPS 0 $940.........................

FOR USE IN LANE 3 ONLYIncreased strength grab irons to resist damage caused in severeapplications.ONLY FOR USE WITH: 313-2673 SWEEPSCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE






23 Bid Term: 2/20/19 - 2/19/21


D6T-GR




GRAB HANDLES (Cont.)

VPAT

L 451-9115 HANDLES, VPAT 0 NC.......................................

FOR USE IN LANE 3 ONLYCANNOT BE USED WITH:313-2673 SWEEPS

L 451-9116 HANDLES, HEAVY DUTY, VPAT 0 $940...........................

FOR USE IN LANE 3 ONLYIncreased strength grab irons to resist damage caused by debrisin landfill or other severe applications.

BLADES

VPAT BULLDOZER ARRANGEMENTS (COMPLETE)

The VPAT Bulldozer (Power, Angle and Tilt) are complete packages,including the blade and cylinders that must not be ordered on theirown. Straight blades will be dismounted for shipment.

L 481-4913 VPAT XL DOZER PACKAGE 0 $43,180...............................

FOR USE IN LANE 3 ONLYIncludes trunnions, c-frame, VPAT blade,two lift cylinders with lines, valve group with lines.Includes finish dozing cutting edges and end bits.REQUIRES: EITHER A REAR MOUNTED COUNTERWEIGHT WITH 2 EXTRA

COUNTERWEIGHT SLABS, A RIPPER OR A WINCHCANNOT BE USED WITH:462-7661 GRADE W/3D, VPAT

L 481-4914 VPAT XL DOZER PKG, GRADE W/3D 0 $55,310........................

FOR USE IN LANE 3 ONLYIncludes trunnions, c-frame, VPAT blade. Also includes specificattachments for grade w/3D : two lift cylinders with lines,angle and tilt cylinders, wiring for stable blade sensor.Includes finish dozing cutting edges and end bits.REQUIRES: EITHER A REAR MOUNTED COUNTERWEIGHT WITH 2 EXTRA

COUNTERWEIGHT SLABS, A RIPPER OR A WINCHONLY FOR USE WITH: 462-7661 GRADE W/3D, VPAT

L 481-4915 VPAT XW/LGP DOZER PACKAGE 0 $45,660...........................

FOR USE IN LANE 3 ONLYIncludes trunnions, c-frame, VPAT blade,two lift cylinders with lines, valve group with lines.Includes finish dozing cutting edges and end bits.REQUIRES: EITHER A REAR MOUNTED COUNTERWEIGHT, A RIPPER OR A WINCHCANNOT BE USED WITH:462-7661 GRADE W/3D, VPAT






24 Bid Term: 2/20/19 - 2/19/21


D6T-GR



BLADES (CONT.)

VPAT BULLDOZER ARRANGEMENTS (COMPLETE) (Cont.)

L 481-4916 VPAT XW/LGP DZR PKG,GRADE W/3D 0 $55,310......................

FOR USE IN LANE 3 ONLYIncludes trunnions, c-frame, VPAT blade. Also includes specificattachments for grade w/3D : two lift cylinders with lines,angle and tilt cylinders, wiring for stable blade sensor.Includes finish dozing cutting edges and end bits.REQUIRES: EITHER A REAR MOUNTED COUNTERWEIGHT, A RIPPER OR A WINCHONLY FOR USE WITH: 462-7661 GRADE W/3D, VPAT

6SU XL BULLDOZER ARRANGEMENTS (TO CONSTITUTE)

6SU XL bulldozer arrangements are made of separate attachments toconsistently order from the following bulldozer, cylinder and bladesections.

6SU XL BULLDOZER INSTALLATION PACKAGES

L 481-4907 6SU XL BULLDOZER 0 $13,730 NI.....................................

Includes push arms, trunnions, tilt cylinder lines and tilt cylinder.CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 481-4908 6SU XL BULLDOZER, GUARDED 0 $14,710 NI............................

FOR USE IN LANE 3 ONLYProvides sleeves to protect cylinder lines in harsh applications.Includes push arms, trunnions, tilt cylinder lines and tilt cylinder.REQUIRED BY: 492-4229 WASTE HANDLING PACKAGE

L 507-9859 6SU XL BULLDOZER, NARROW 0 $13,730............................

0 $13,730 NIFOR USE IN LANE 3 ONLYNON SLOPE ASSIST BULLDOZERThis bulldozer can be ordered INSTALLED on the machine, if selectedwith the NARROW blade, all listed INSTALLED.CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

462-7660 GRADE W/3D

L 507-9857 6SU XL BULLDOZER, FINEGRADING 0 $18,500.........................

0 $18,500 NIFOR USE IN LANE 3 ONLYNON SLOPE ASSIST BULLDOZERNARROW bulldozer for specific fine grading applications.This bulldozer can be ordered INSTALLED on the machine, if selectedwith the NARROW blade, all listed INSTALLED.REQUIRES: 475-4772 LGP CYLINDERS, LIFT, STANDARDCANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

462-7660 GRADE W/3D






25 Bid Term: 2/20/19 - 2/19/21


D6T-GR



BLADES (CONT.)

6SU XL BULLDOZER ARRANGEMENTS (TO CONSTITUTE) (Cont.)

6SU XL BULLDOZER LIFT CYLINDERS

L 475-4771 CYLINDERS, LIFT, STD, XL/XW 0 $7,580............................

CANNOT BE USED WITH:462-7660 GRADE W/3D507-9857 6SU XL BULLDOZER, FINEGRADING

L 475-4773 CYLINDERS, LIFT, GRADE, XL/XW 0 $16,930..........................

ONLY FOR USE WITH: 462-7660 GRADE W/3DCANNOT BE USED WITH:507-9857 6SU XL BULLDOZER, FINEGRADING

6SU XL BLADES

P 481-4880 BLADE, 6SU XL ARO 0 $11,610 NI....................................

Includes finish dozing cutting edges, end bits and left, rightand center accugrade mounts.ALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 481-4907 6SU XL BULLDOZER

481-4908 6SU XL BULLDOZER, GUARDED507-9857 6SU XL BULLDOZER, FINEGRADING

P 481-4883 BLADE, 6SU XL LANDFILL 0 $15,690 NI................................

FOR USE IN LANE 3 ONLYIncludes TRASH RACK. Includes finish dozing cutting edges and endbits. Blade capacity for 6SU is 11.2m3/14.3 yd3.Increases dozing capacity on machines when working in lightermaterials such as in landfills.Must be retrofitted with mounting plates when ordered with theAccugrade Ready, AC. See Special Instruction REHS7213 for informationon retrofitting the mounting plates.RECOMMENDED WITH WASTE HANDLING PACKAGEALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 481-4908 6SU XL BULLDOZER, GUARDEDCANNOT BE USED WITH:313-2673 SWEEPS

P 503-4187 BLADE, 6SU XL NARROW 0 $9,920................................

0 $9,920 NIThis blade comes Accugrade ready and includes brackets forAccugrade receivers.This blade can be ordered INSTALLED on the machine, if selected witha NARROW bulldozer, all listed INSTALLED.ALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 507-9859 6SU XL BULLDOZER, NARROW

507-9857 6SU XL BULLDOZER, FINEGRADINGCANNOT BE USED WITH:462-7660 GRADE W/3D

L 340-7729 NO BLADE 0 NC...........................................

Select this reference when no blade desired with the machine.Not to be used with VPAT COMPLETE bulldozers.






26 Bid Term: 2/20/19 - 2/19/21


D6T-GR



BLADES (CONT.)

6SU XW BULLDOZER ARRANGEMENTS (TO CONSTITUTE)

6SU XW bulldozer arrangements are made of separate attachments toconsistently order from the following bulldozer, cylinder and bladesections.

6SU XW BULLDOZER INSTALLATION PACKAGES

L 481-4909 6SU XW BULLDOZER 0 $16,750 NI....................................

FOR USE IN LANE 3 ONLYIncludes push arms, trunnions, tilt cylinder lines and tilt cylinder.

L 481-4910 6SU XW BULLDOZER, GUARDED 0 $17,730 NI...........................

FOR USE IN LANE 3 ONLYProvides sleeves to protect cylinder lines in harsh applications.Includes push arms, trunnions, tilt cylinder lines and tilt cylinder.

6SU XW BULLDOZER LIFT CYLINDERS

L 475-4771 CYLINDERS, LIFT, STD, XL/XW 0 $7,580............................

CANNOT BE USED WITH:462-7660 GRADE W/3D

L 475-4773 CYLINDERS, LIFT, GRADE, XL/XW 0 $16,930..........................

ONLY FOR USE WITH: 462-7660 GRADE W/3D

6SU XW BLADES

P 481-4885 BLADE, 6SU XW, ARO 0 $12,910 NI..................................

FOR USE IN LANE 3 ONLYIncludes finish dozing cutting edges, end bits and left, rightand center accugrade mounts.ALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 481-4909 6SU XW BULLDOZER

481-4910 6SU XW BULLDOZER, GUARDED

L 340-7729 NO BLADE 0 NC...........................................

Select this reference when no blade desired with the machine.Not to be used with VPAT COMPLETE bulldozers.






27 Bid Term: 2/20/19 - 2/19/21


D6T-GR



BLADES (CONT.)

6S LGP BULLDOZER ARRANGEMENTS (TO CONSTITUTE)

6S LGP bulldozer arrangements are made of separate attachments toconsistently order from the following bulldozer, cylinder and bladesections.

6S LGP BULLDOZER INSTALLATION PACKAGES

L 481-4911 6S LGP BULLDOZER 0 $16,830 NI.....................................

Includes push arms, trunnions, tilt cylinder lines and tilt cylinder.CANNOT BE USED WITH:492-4229 WASTE HANDLING PACKAGE

L 481-4912 6S LGP BULLDOZER, GUARDED 0 $17,820 NI............................

FOR USE IN LANE 3 ONLYProvides sleeves to protect cylinder lines in harsh applications.Included: Push arms, trunnions, tilt cylinder lines and tilt cylinder.REQUIRED BY: 492-4229 WASTE HANDLING PACKAGE

6S LGP BULLDOZER LIFT CYLINDERS

L 475-4772 CYLINDERS, LIFT, STD, LGP 0 $8,070..............................

CANNOT BE USED WITH:462-7660 GRADE W/3DREQUIRED BY: 507-9857 6SU XL BULLDOZER, FINEGRADING

L 475-4774 CYLINDERS, LIFT, GRADE, LGP 0 $16,930............................

ONLY FOR USE WITH: 462-7660 GRADE W/3D

6S LGP BLADES

P 481-4890 BLADE, 6S LGP ARO 0 $11,370 NI....................................

Includes finish dozing cutting edges, end bits and left, rightand center accugrade mounts.ALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 481-4911 6S LGP BULLDOZER

481-4912 6S LGP BULLDOZER, GUARDED






28 Bid Term: 2/20/19 - 2/19/21


D6T-GR



BLADES (CONT.)

6S LGP BULLDOZER ARRANGEMENTS (TO CONSTITUTE) (Cont.)

P 481-4893 BLADE, 6S LGP, LANDFILL 0 $16,950 NI...............................

FOR USE IN LANE 3 ONLYLandfill blade is equipped with a TRASH RACK to increase productivecapacity of the blade and protect the radiator. Blade capacity is9.3 m3/12.1 yd3. Increases dozing capacity on machines when workingin lighter materials such as landfills. Includes finish dozingcutting edges and end bits.Must be retrofitted with mounting plates when ordered with theAccugrade Ready, AC. See Special Instruction REHS7213 forinformationon retrofitting the mounting plates.RECOMMENDED WITH WASTE HANDLING PACKAGEALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 481-4912 6S LGP BULLDOZER, GUARDEDCANNOT BE USED WITH:313-2673 SWEEPS

L 340-7729 NO BLADE 0 NC...........................................

Select this reference when no blade desired with the machine.Not to be used with VPAT complete bulldozers.

FLUIDS

ENGINE COOLANTS / TRANSMISSION OIL

L 457-7583 FLUIDS, STD (-37C) 0 NC....................................

Includes standard engine and transmission oil.Provides cooling system antifreeze protection, down to -37C (-34F).

L 458-3877 FLUIDS, STD (-37C), BIO 0 $2,410................................

FOR USE IN LANE 3 ONLYThis Hydraulic Environmental Ester Synthetic oil is recommendedwhen required for environmental compliance. Factory filled, it appliesto the implement and differential steering hydraulic systems.Includes standard oil for engine and transmission.Provides cooling system antifreeze protection, down to -37C (-34F).

L 457-7671 FLUIDS, ARCTIC (-51C) 0 $252 NET..................................

FOR USE IN LANE 3 ONLYIncludes standard engine and transmission oil.Provides cooling system antifreeze protection, down to -51C (-58F).

PACKING

0G-9236 COMPLETE STORAGE PROTECTION 0 $242 NET.........................

Machines have been sprayed with Fluid Film TM.This product is added for corrosion protection while shippingand for extended storage periods.This product will need to be power washed with soapy water priorto shipment to the customer.Cilix AND foam protection on all cylinders are also included inthis storage protection procedure.Recommended : Sea and all type or long distance shipment






29 Bid Term: 2/20/19 - 2/19/21


D6T-GR


USE NO. lbs AT DEALEROPTIONAL ATTACHMENTS

ELECTRICAL

BEACONBeacons are delivered detached to avoid transportation damages.

L 378-7927 LIGHT, WARNING, STROBE 0 $1,175 NI...............................

FOR USE IN LANE 3 ONLYProvides a heavy duty single flash strobe beacon unit, which isweather sealed and water resistant with the power supply encased ingel (anti-vibration). The beacon is wired directly and can only beturned off by using the disconnect switch.ONLY FOR USE WITH: 518-3820 CAB COMFORT PACKAGE, ENHANCED

L 426-0970 LIGHT, WARNING, STROBE W/PLATE 0 $1,175.......................

FOR USE IN LANE 3 ONLYProvides a heavy duty single flash strobe beacon unit, which isweather sealed and water resistant with the power supply encased ingel (anti-vibration). The beacon is wired directly and can only beturned off by using the disconnect switch.Includes a mounting plate installed on the standard cab.CANNOT BE USED WITH:518-3820 CAB COMFORT PACKAGE, ENHANCED

313-2673 SWEEPS

GRADE CONTROL PREPARATIONWiring option for electrical power supply to the specific CAT GRADECONTROL cylinders. This option is only available for 6 or 8 lightconfigurations. Not needed if 10 lights ordered as the electricalpower is then supplied by the cylinder lights.

L 482-7066 WIRING, GRADE W/3D 0 NC..................................

ONLY FOR USE WITH: 462-7660 GRADE W/3D,and513-9345 LIGHTS, 6, BASIC, or513-9357 LIGHTS, 6, BASIC, REAR SCREEN, or513-9350 LIGHTS, 8, SWEEPS

L 458-3018 WIRING, GRADE W/3D, VPAT 0 NC.............................

FOR USE IN LANE 3 ONLYONLY FOR USE WITH: 462-7661 GRADE W/3D, VPAT,

and513-9345 LIGHTS, 6, BASIC, or513-9357 LIGHTS, 6, BASIC, REAR SCREEN, or513-9350 LIGHTS, 8, SWEEPS






30 Bid Term: 2/20/19 - 2/19/21


D6T-GR



OPERATOR ENVIRONMENT

P 509-7665 VISIBILITY ARR, SINGLE CAMERA 0 $530..........................

0 $530 NIThe camera system can be used to enhance the operators visibilityof his surroundings, or provide a better view of his work tool.The image is included in the main machine display when the machineis placed in reverse gear.RECOMMENDED WITH WASTE HANDLING PACKAGEAVAILABLE INSTALLED ONLYALSO AVAILABLE ON A MISCELLANEOUS ORDER

L 480-0279 AIR CONDITIONER, ROPS 0 NC.................................

Provides ROPS mounted air conditioning condenser core and fans.Prevents early plugging of air conditioning condenser core in debrisladen environments such as waste handling sites. Mounts to rear ofROPS.

SAFETY AND SECURITY

FRONT TOWING DEVICES

L 433-6933 TOWING DEVICE, PULL-HOOK 0 $590.............................

Provides a front pull hook on the sealed bottom guard.REQUIRED BY: 492-4229 WASTE HANDLING PACKAGE

390-0900 GUARD, BOTTOM, SEALED, HD

FUEL SYSTEMS

FUEL TANK COVERThis section lists the different options to complete the fuel tank,fast fill & refill-ready only. The basic fuel tank has no acces tothis section as it includes its own standard covers.

L 439-6270 COVER 0 $167..............................................

Provides 2 covers to close fuel tank openings.ONLY FOR USE WITH: 494-2343 FUEL TANK, FF & REFILL READY

P 439-6269 FUEL SYSTEM, FAST FILL 15 $1,100...............................

0 $1,100 NIProvides a complete SHAW fast fill installation.AVAILABLE INSTALLED ONLYALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 494-2343 FUEL TANK, FF & REFILL READY

P 439-6271 REFILLING FUEL PUMP 0 $1,390...................................

0 $1,390 NIProvides an electrical fuel refilling pump (50 liters/min),with automatic shut-off.Refills the D6T fuel tank in about 6 min.Includes 3 meter hose and filter.AVAILABLE INSTALLED ONLYALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 494-2343 FUEL TANK, FF & REFILL READY






31 Bid Term: 2/20/19 - 2/19/21


D6T-GR



GUARDS

L 390-9389 GUARD, FUEL TANK 0 $2,960....................................

FOR USE IN LANE 3 ONLYREQUIRED BY: 492-4229 WASTE HANDLING PACKAGE

509-7660 ALARM, BACKUP, GUARDED482-7006 SEAL GROUP, HIGH DEBRIS

L 426-5281 GUARD, LIGHTS 0 $276.......................................

FOR USE IN LANE 3 ONLYONLY FOR USE WITH: 513-9346 LIGHTS, 10, PREMIUM

513-9358 LIGHTS,10, PREMIUM,REAR SCREENINCLUDED IN: 492-4229 WASTE HANDLING PACKAGE

L 313-2673 SWEEPS 0 $6,800.............................................

FOR USE IN LANE 3 ONLYREQUIRES: 513-9350 LIGHTS, 8, SWEEPS, and

390-1849 HANDLES, HEAVY DUTY, SWEEPS (for SU/S machines)451-9116 HANDLES, HEAVY DUTY, VPAT (for VPAT machines)

CANNOT BE USED WITH:518-3820 CAB COMFORT PACKAGE, ENHANCED481-4883 BLADE, 6SU XL LANDFILL481-4893 BLADE, 6S LGP, LANDFILL426-0970 LIGHT, WARNING, STROBE W/PLATE

L 393-3706 SCREEN, REAR 0 $1,295........................................

FOR USE IN LANE 3 ONLYProvides a protective screen covering the rear cab window.REQUIRED BY Winch.ONLY FOR USE WITH: 513-9357 LIGHTS, 6, BASIC, REAR SCREEN

513-9358 LIGHTS,10, PREMIUM,REAR SCREEN513-9350 LIGHTS, 8, SWEEPS

REQUIRED BY: 371-0953 PA56 WINCH PACKAGE, STD SPEED371-0954 PA56 WINCH PACKAGE, SLOW SPEED

OTHER ATTACHMENTS

REAR ATTACHMENTS

P 1Q-4324 COUNTERWEIGHT, REAR 2,000 $6,650.............................

2,000 $6,650 NISPECIFIC COUNTERWEIGHT TO BE INSTALLED WITH THE DRAWBAR.Provides a 910kg rear counterweight, which includes the weight ofthe rear drawbar.Rear counterweight is STRONGLY RECOMMENDED for optimum tractor balancewhen ripper or winch is not ordered.AVAILABLE INSTALLED ONLYALSO AVAILABLE ON A MISCELLANEOUS ORDERONLY FOR USE WITH: 3W-6866 DRAWBAR, RIGID LONGREQUIRED BY: ALL VPAT BULLDOZERS






32 Bid Term: 2/20/19 - 2/19/21


D6T-GR




REAR ATTACHMENTS (Cont.)

L 117-9058 COUNTERWEIGHT, REAR SLAB 760 $2,940..........................

FOR USE IN LANE 3 ONLYSPECIFIC SLABS TO BE INSTALLED ON THE COUNTERWEIGHT, REAR.Can order two of these slabs maximum to provide an additionalcounterweight of 340 kg each.QUANTITY OF 2 REQUIRED WITH XL VPAT AND ALL VPAT FOLDABLE BULLDOZERS,AND RECOMMENDED WITH XW VPAT AND LGP VPAT BULLDOZERS.ONLY FOR USE WITH: 1Q-4324 COUNTERWEIGHT, REAR

L 238-1177 COUNTERWEIGHT, ADDITIONAL 672 $2,750.........................

FOR USE IN LANE 3 ONLYSPECIFIC COUNTERWEIGHT TO BE INSTALLED WITH THE STRIKER BARS.Adds approximately a 300kg weight and a 610mm length to the machine.QUANTITY OF 2 RECOMMENDED IN WASTE HANDLING APPLICATIONS.QUANTITY OF 2 REQUIRED WITH XL VPAT AND ALL VPAT FOLDABLE BULLDOZERS,AND RECOMMENDED WITH XW VPAT AND LGP VPAT BULLDOZERS.ONLY FOR USE WITH: 514-0441 STRIKER BAR BOX, REAR


APPLICATION SPECIFIC COMPONENTS

SEALING

L 482-7006 SEAL GROUP, HIGH DEBRIS 0 $1,580...............................

FOR USE IN LANE 3 ONLYEnhances the sealing of interfaces between chassis, cab, engineenclosure, fenders, radiator guard and fuel tank.RECOMMENDED IN HIGH DEBRIS ENVIRONMENTREQUIRES: 390-0900 GUARD, BOTTOM, SEALED, HD, and

390-9389 GUARD, FUEL TANKINCLUDED IN: 492-4229 WASTE HANDLING PACKAGE

GROUND ENGAGING TOOLS

RIPPER TEETHRipper does not include any shank.Teeth will be ordered Installed if the ripper is Installed,They will be ordered Not Installed if ripper Not Installed.

P 9J-8926 TOOTH, CURVED 481 $1,340....................................

481 $1,340 NIOne tooth. Curved shank with centerline tip.Must be ordered in quantity of 3.ALSO AVAILABLE ON A MISCELLANEOUS ORDERREQUIRED BY: 487-3445 6 RIPPER, MULTI-SHANK






33 Bid Term: 2/20/19 - 2/19/21


D6T-GR



GROUND ENGAGING TOOLS (CONT.)

RIPPER TEETH (Cont.)

P 8J-2189 TOOTH, STRAIGHT 456 $1,380...................................

456 $1,380 NIOne tooth. Straight shank with penetration tip.Must be ordered in quantity of 3.ALSO AVAILABLE ON A MISCELLANEOUS ORDERREQUIRED BY: 487-3445 6 RIPPER, MULTI-SHANK

FLUIDS

0G-6009 ANTIFREEZE, -50C (-58F) 117 $252 NET..............................

Provides cooling system antifreeze protection down to -50C

DOCUMENTATION

0P-2046 PREPARATION FOR INSPECTION 0 $406 NET............................

Inspector is sent by the dealer to review the machine.Plant must be contacted 2 weeks before the CSD date.

PACKING

EXPORT PACKING

0G-3256 PACK-DISMOUNTED OR N.I. BLADE 0 $212 NET.........................

Packing for a dismounted or not installed blade.

0G-3257 PACK-NOT INSTALLED RIPPER 0 $262 NET.............................

Packing for a dismounted or not installed ripper.

0G-0370 PACK - SPECIAL MISC. MATERIAL 0 $105 NET..........................

Packing for a dismounted or not installed attachment, out of theblades and rippers.






34 Bid Term: 2/20/19 - 2/19/21

Caterpillar Tractor Type Tractors The Educational Services ...Alternator, brushless Batteries, 2...

Documents

Transcript of Caterpillar Tractor Type Tractors The Educational Services ...Alternator, brushless Batteries, 2...