Category Profile Edgings
Transcript of Category Profile Edgings
-
7/26/2019 Category Profile Edgings
1/31
Accesso-
ries
ACCESSORIES
-
7/26/2019 Category Profile Edgings
2/31
-
7/26/2019 Category Profile Edgings
3/31
354
354
354
355
355
355
355
355
355355
356
357
357
357
357
357
357
360
361
361
361
361
361
361
Herstellung nach
DIN 17118/59413 1-3
Profillnge 3000 mm
Mastab 1:1 LR 10 1.8 LR 10 1.7LR 10 1.3
Item Typ / Breadth of slit Material suitable for suitable for suitable for suitable for Information
number perforated expanded crimped welded about item
bleche metal mesh mesh see page
100766 LR 10, 1.3 mm slit DC 01 (St 12.03)
100768 LR 10, 1.3 mm slit 1.4301
100944 LR 10, 1.3 mm slit 1.4301 K320
100654 LR 18, 1.7 mm slit DC 01 (St 12.03)
100661 LR 18, 1.7 mm slit DX51D (send. galvanised)
100666 LR 18, 1.7 mm slit 1.4301
100671 LR 18, 1.7 mm slit Alu 99.5 hh
100675 LR 18, 1.7 mm slit 1.4301 K320
101492 LR 18, 1.3 mm slit 1.4301 101493 LR 18, 1.3 mm slit 1.4301 K320
101495 LR 27, 1.3 mm slit 1.4301 K320
100655 LR 27, 1.8 mm slit DC 01 (St 12.03)
100662 LR 27, 1.8 mm slit DX51D (send. galvanised)
100667 LR 27, 1.8 mm slit 1.4301
100672 LR 27, 1.8 mm slit Alu 99.5 hh
100676 LR 27, 1.8 mm slit 1.4301 K320
100658 LR 27, 2.7 mm slit DC 01 (St 12.03)
100942 LE 10x12, 1.3 mm slit 1.4301 K320
101367 LE 12x18, 1.3 mm slit DC 01 (St 12.03)
101368 LE 12x18, 1.3 mm slit DX51D (send. galvanised)
100772 LE 12x18, 1.3 mm slit 1.4301
100943 LE 12x18, 1.3 mm slit 1.4301 K320
100771 LE 12x18, 1.8 mm slit DC 01 (St 12.03)
101183 LE 12x18, 1.8 mm slit Alu 99.5 hh
The perfect framework for your ideas: Profiles quickly and simply edge perforated sheets, textured sheets and unperforated
material. In the following table, you can see which filling material suits which profile edging.
PROFILE EDGINGS
Overview of possible combinations
MEVACO Catalogue 2010 351
-
7/26/2019 Category Profile Edgings
4/31
362
362
362
362
362
362
363
363
363363
363
366
366
366
366
366
367
368
368
368
369
369
369
352 MEVACO Catalogue 2010
The perfect framework for your ideas: Profiles quickly and simply edge perforated sheets, textured sheets and unperforated
material. In the following table, you can see which filling material suits which profile edging.
PROFILE EDGINGS
Overview of possible combinations
(continuation)
100656 LE 20x30, 1.7 mm slit DC 01 (St 12.03)
100663 LE 20x30, 1.7 mm slit DX51D (send. galvanised)
100668 LE 20x30, 1.7 mm slit 1.4301
100673 LE 20x30, 1.7 mm slit Alu 99.5 hh
100677 LE 20x30, 1.7 mm slit 1.4301 K320
100659 LE 20x30, 2.7 mm slit DC 01 (St 12.03)
100653 LT 20x20, 1.7 mm slit DC 01 (St 12.03)
100660 LT 20x20, 1.7 mm slit DX51D (send. galvanised)
100665 LT 20x20, 1.7 mm slit 1.4301 100657 LD 30x22, 1.7 mm slit DC 01 (St 12.03)
100664 LD 30x22, 1.7 mm slit DX51D (send. galvanised)
100696 U-Profile, 1.3 mm slit DX51D (send. galvanised)
100699 U-Profile, 1.3 mm slit 1.4301
100697 U-Profile, 1.8 mm slit DX51D (send. galvanised)
100700 U-Profile, 1.8 mm slit 1.4301
101186 U-Profile, 1.8 mm slit Alu 99.5 hh
101305 SE 15,2x25 - 3.1-7.3 mm slit DC 01 (St 12.03)
100679 WE 30x30, 5.7 mm slit DC 01 (St 12.03)
100684 WE 30x30, 5.7 mm slit DX51D (send. galvanised)
101240 WE 30x30, 5.7 mm slit 1.4301
100680 WE 30x30, 7.5 mm slit DC 01 (St 12.03)
100685 WE 30x30, 7.5 mm slit DX51D (send. galvanised)
100688 WE 30x30, 7.5 mm slit 1.4301
Item Typ / Breadth of slit Material suitable for suitable for suitable for suitable for Artikelinfo
number perforated expanded crimped welded auf
bleche metal mesh mesh Seite
-
7/26/2019 Category Profile Edgings
5/31
370
370
371
371
372
372
372
372
372373
MEVACO Catalogue 2010 353
100681 WE 40x40, 7.5 mm slit DC 01 (St 12.03)
100686 WE 40x40, 7.5 mm slit DX51D (send. galvanised)
100682 WE 40x40, 9.6 mm slit DC 01 (St 12.03)
101241 WE 40x40, 9.6 mm slit 1.4301
100689 GEV 30x30, 3.0 mm slit DC 01 (St 12.03)
100692 GEV 30x30, 3.0 mm slit 1.4301
100690 GEV 30x30, 4.0 mm slit DC 01 (St 12.03)
101243 GEV 30x30, 4.0 mm slit DX51D (send. galvanised)
100693 GEV 30x30, 4.0 mm slit 1.4301 100691 GEV 30x30, 5.0 mm slit DC 01 (St 12.03)
Item Typ / Breadth of slit Material suitable for suitable for suitable for suitable for Artikelinfo
number perforated expanded crimped welded auf
bleche metal mesh mesh Seite
-
7/26/2019 Category Profile Edgings
6/31
The perfect framework for your ideas: profiles quickly and simply edge expanded metals, per-
forated sheets, meshes and unperforated material. In the table from page 351, you can see
which filling material suits which profile edging. Please note that sendzimir galvanised profiles
are not suitable for outdoor use as the coating does not offer sufficient corrosion protection.
PROFILE EDGINGS
Type LR
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LR 10 1.3 1.00 1.3 1.5 100766 0.24
stainless steel
304 X5CrNi18-10 2B LR 10 1.3 1.00 1.3 1.5 100768 0.24
polished grain 320 LR 10 1.3 1.00 1.3 1.5 100944 0.24
354 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
7/31
1,9
1,3
18,0
5,0
LR 18 1.7LR 18 1.3LR 10 1.3
steel
LR 18 1.7 1.25 1.7 2.0 100654 0.57
sendzimir galvanized
LR 18 1.7 1.25 1.7 2.0 100661 0.57
aluminium
AW-1050A H24 LR 18 1.7 1.25 1.7 2.0 100671 0.20
stainless steel
304 X5CrNi18-10 2B LR 18 1.7 1.25 1.7 2.0 100666 0.57
polished grain 320 LR 18 1.7 1.25 1.7 2.0 100675 0.57
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
stainless steel
304 X5CrNi18-10 2B LR 18 1.3 1.25 1.3 1.5 101492 0.57
polished grain 320 LR 18 1.3 1.25 1.3 1.5 101493 0.57
MEVACO Catalogue 2010 355
-
7/26/2019 Category Profile Edgings
8/31
The perfect framework for your ideas: profiles quickly and simply edge expanded metals, per-
forated sheets, meshes and unperforated material. In the table from page 351, you can see
which filling material suits which profile edging. Please note that sendzimir galvanised profiles
are not suitable for outdoor use as the coating does not offer sufficient corrosion protection.
PROFILE EDGINGS
Type LR
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
stainless steel
304 X5CrNi18-10 2B
polished grain 320 LR 27 1.3 1.50 1.3 1.5 101495 1.15
356 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
9/31
1,8
1,3
27,0
12
,0
LR 27 1.3 LR 27 1.8 LR 27 2.7
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LR 27 1.8 1.50 1.8 2.0 100655 1.15
sendzimir galvanized
LR 27 1.8 1.50 1.8 2.0 100662 1.15
aluminium
AW-1050A H24 LR 27 1.8 1.50 1.8 2.0 100672 0.41
stainless steel
304 X5CrNi18-10 2B LR 27 1.8 1.50 1.8 2.0 100667 1.15
polished grain 320 LR 27 1.8 1.50 1.8 2.0 100676 1.15
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LR 27 2.7 1.50 2.7 3.0 100658 1.15
MEVACO Catalogue 2010 357
-
7/26/2019 Category Profile Edgings
10/31
(1) Fine zinc alloy: powder coating is possible at 180C. Contact corrosion can occur if used outdoors with different materials.
The corner connectors made from fine zinc alloys are not suitable for retro hot-dip galvanisation.
(2) Stainless steel: the stainless steel corner connectors are corrosion-resistant.
Their surface has a satin finish and is comparable with K320.
The newly developed end caps are ideal for a clean sealing of open profile edges.
The polished profile end caps are particularly suited for profiles in polished stainless steel.
Processing instructions can be found in the Technology/ Tips category on page 402.
CORNER CONNECTORS
for profile edgings Type LR
Type Material Suitable Item Weight
for profile Number in
edgings kg
corner connector 90 for LR 10 die casting stainless steel alloy (2)
GXCrNi19-10 (1.4308),
polished grain 320 LR 10 100859 0.015
Type Material Suitable Item Weight
for profile Number in
edgings kg
corner connector 90 for LR 18 die casting (1)
in fine zinc alloy Z410 LR 18 100701 0.100
corner connector 90 for LR 18 die casting stainless steel alloy (2)
GXCrNi19-10 (1.4308),
polished grain 320 LR 18 100702 0.150
358 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
11/31
Corner connector LR 10 Corner connector LR 27Corner connector LR 18
Type Material Suitable Item Weight
for profile Number in
edgings kg
corner connector 90 for LR 27 die casting (1)
in fine zinc alloy Z410 LR 27 101299 0.196
corner connector 90 for LR 27 die casting stainless steel alloy (2)
GXCrNi19-10 (1.4308),
polished grain 320 LR 27 100860 0.260
Type Material Suitable Item Weight
for profile Number in
edgings kg
profile end cap for LR 18 stainless steel
X8CrNiS18-9 (1.4305),
polished grain 320 LR 18 101244 0.020
profile end cap for LR 27 stainless steel
X8CrNiS18-9 (1.4305),
polished grain 320 LR 27 101245 0.040
MEVACO Catalogue 2010 359
-
7/26/2019 Category Profile Edgings
12/31
The perfect framework for your ideas: profiles quickly and simply edge expanded metals, per-
forated sheets, meshes and unperforated material. In the table from page 351, you can see
which filling material suits which profile edging. Please note that sendzimir galvanised profiles
are not suitable for outdoor use as the coating does not offer sufficient corrosion protection.
PROFILE EDGINGS
Type LE
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
stainless steel
304 X5CrNi18-10 2B LE 10x12 1.3 1.00 1.3 1.5 100774 0.31
polished grain 320 LE 10x12 1.3 1.00 1.3 1.5 100942 0.30
360 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
13/31
LE 10x12 1.3 LE 12x18 1.3 LE 12x18 1.8
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LE 12x18 1.3 1.25 1.3 1.5 101367 0.55
sendzimir galvanized
LE 12x18 1.3 1.25 1.3 1.5 101368 0.55
stainless steel
304 X5CrNi18-10 2B LE 12x18 1.3 1.25 1.3 1.5 100772 0.57
polished grain 320 LE 12x18 1.3 1.25 1.3 1.5 100943 0.55
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LE 12x18 1.8 1.25 1.8 2.0 100771 0.57
aluminium
AW-1050A H24 LE 12x18 1.8 1.25 1.8 2.0 101183 0.21
MEVACO Catalogue 2010 361
-
7/26/2019 Category Profile Edgings
14/31
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1
The perfect framework for your ideas: profiles quickly and simply edge expanded metals, per-
forated sheets, meshes and unperforated material. In the table from page 351, you can see
which filling material suits which profile edging. Please note that sendzimir galvanised profiles
are not suitable for outdoor use as the coating does not offer sufficient corrosion protection.
PROFILE EDGINGS
Types LE, LD and LT
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LE 20x30 1.7 1.50 1.7 1.5-2.0 100656 1.27
sendzimir galvanized
LE 20x30 1.7 1.50 1.7 1.5-2.0 100663 1.27
aluminium
AW-1050A H24 LE 20x30 1.7 1.50 1.7 1.5-2.0 100673 0.45
stainless steel
304 X5CrNi18-10 2B LE 20x30 1.7 1.50 1.7 1.5-2.0 100668 1.27
polished grain 320 LE 20x30 1.7 1.50 1.7 1.5-2.0 100677 1.27
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LE 20x30 2.7 1.50 2.7 3.0 100659 1.27
362 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
15/31
LD 30x22 1.7 LT 20x20 1.7LE 20x30 2.7LE 20x30 1.7
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LD 30x22 1.7 1.50 1.7 1.5-2.0 100657 1.15
sendzimir galvanized
LD 30x22 1.7 1.50 1.7 1.5-2.0 100664 1.15
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
LT 20x20 1.7 1.25 1.7 1.5-2.0 100653 0.67
sendzimir galvanized
LT 20x20 1.7 1.25 1.7 1.5-2.0 100660 0.67
stainless steel
304 X5CrNi18-10 2B LT 20x20 1.7 1.25 1.7 1.5-2.0 100665 0.67
MEVACO Catalogue 2010 363
-
7/26/2019 Category Profile Edgings
16/31
(1) Fine zinc alloy: powder coating is possible at 180C. Contact corrosion can occur if used outdoors with different materials.
The corner connectors made from fine zinc alloys are not suitable for retro hot-dip galvanisation.
(2) Stainless steel: the stainless steel corner connectors are corrosion-resistant.
Their surface has a satin finish and is comparable with K320.
The newly developed end caps are ideal for a clean sealing of open profile edges.
The polished profile end caps are particularly suited for profiles in polished stainless steel.
Processing instructions can be found in the Technology/ Tips category on page 402.
CORNER CONNECTORS
for profile edgings Type LE
Type Material Suitable Item Weight
for profile Number in
edgings kg
corner connector 90
for LE 10x12 die casting stainless steel alloy (2)
GXCrNi19-10 (1.4308)
polished grain 320 LE 10x12 100862 0.022
Type Material Suitable Item Weight
for profile Number in
edgings kg
corner connector 90
for LE 12x18 die casting (1)
in fine zinc alloy
Z410 LE 12x18 101301 0.039
corner connector 90
for LE 12x18 die casting stainless steel alloy (2)
GXCrNi19-10 (1.4308)
polished grain 320 LE 12x18 100863 0.049
364 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
17/31
Corner connector
LE 12x18
Corner connector
LE 20x30
Corner connector
LE 10x12
Type Material Suitable Item Weight
for profile Number in
edgings kg
corner connector 90
for LE 20x30 die casting (1)
in fine zinc alloy
Z410 LE 20x30 101300 0.226
corner connector 90
for LE 20x30 die casting stainless steel alloy (2)
GXCrNi19-10 (1.4308)
polished grain 320 LE 20x30 100861 0.315
Type Material Suitable Item Weight
for profile Number in
edgings kg
profile end cap
for LE 20x30 stainless steel
X8CrNiS18-9 (1.4305)
polished grain 320 LE 20x30 101246 0.040
illustration above
on a scale of 2:3
MEVACO Catalogue 2010 365
-
7/26/2019 Category Profile Edgings
18/31
The slit widths of the U-profiles are appropriate for the materi-
al thicknesses. Clamping on perforated or textured sheets is
thus especially easy. Sufficient corrosion protection cannot be
achieved outdoors using sendzimir galvanised profiles.
Manufactured i.a.w. European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm, Scale 1:1
U-PROFILES
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
sendzimir galvanized
U-Profile 1.3 1.25 1.3 1.5 100696 0.36
stainless steel
304 X5CrNi18-10 2B U-Profile 1.3 1.25 1.3 1.5 100699 0.36
U-Profile 1.3 U-Profile 1.8
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
sendzimir galvanized
U-Profile 1.8 1.25 1.8 2.0 100697 0.36
aluminium
AW-1050A H24 U-Profile 1.8 1.25 1.8 2.0 101186 0.13
stainless steel
304 X5CrNi18-10 2B U-Profile 1.8 1.25 1.8 2.0 100700 0.36
366 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
19/31
SE 15,2x25
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1
Material Type Thickness Breadth For fillings of Item Weight
of material of slit material thickness Number in
in mm in mm in mm kg/m
steel
SE 15.2x25 - 3.1-7.3 0.80 3.1-7.3 3.1-7.3 101305 0.59
The perfect framework for your ideas: profiles quickly and
simply edge expanded metals, perforated sheets, meshes
and unperforated material. In the table from page 351,
you can see which filling material suits which profile edging.
Please note that sendzimir galvanised profiles are not suitable
for outdoor use as the coating does not offer sufficient
corrosion protection.
PROFILE EDGINGS
Type SE
MEVACO Catalogue 2010 367
-
7/26/2019 Category Profile Edgings
20/31
Material Type Thickness Breadth For crimped mesh Item Weight
of material of slit of the Number in
in mm in mm mesh width kg/m
steel
WE 30x30 5.7 1.50 5.7 30x30x3, 40x40x3 100679 1.48
sendzimir galvanized
WE 30x30 5.7 1.50 5.7 30x30x3 100684 1.48
stainless steel
304 X5CrNi18-10 2B WE 30x30 5.7 1.50 5.7 30x30x3 101240 1.42
The perfect framework for your ideas: profiles quickly and simply edge expanded metals, per-
forated sheets, meshes and unperforated material. In the table from page 351, you can see
which filling material suits which profile edging. Please note that sendzimir galvanised profiles
are not suitable for outdoor use as the coating does not offer sufficient corrosion protection.
PROFILE EDGINGS
Type WE
368 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
21/31
WE 30x30 7.5WE 30x30 5.7
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1, technical drawings
on a scale of 2:3
Material Type Thickness Breadth For crimped mesh Item Weight
of material of slit of the Number in
in mm in mm mesh width kg/m
steel
WE 30x30 7.5 1.50 7.5 40x40x4 100680 1.43
sendzimir galvanized
WE 30x30 7.5 1.50 7.5 40x40x4 100685 1.43
stainless steel
304 X5CrNi18-10 2B WE 30x30 7.5 1.50 7.5 40x40x4 100688 1.43
MEVACO Catalogue 2010 369
-
7/26/2019 Category Profile Edgings
22/31
The perfect framework for your ideas: profiles quickly and simply edge expanded metals, per-
forated sheets, meshes and unperforated material. In the table from page 351, you can see
which filling material suits which profile edging. Please note that sendzimir galvanised profiles
are not suitable for outdoor use as the coating does not offer sufficient corrosion protection.
PROFILE EDGINGS
Type WE
Material Type Thickness Breadth For crimped mesh Item Weight
of material of slit of the Number in
in mm in mm mesh width kg/m
steel
WE 40x40 7.5 2.00 7.5 40x40x4 100681 2.47
sendzimir galvanized
WE 40x40 7.5 2.00 7.5 40x40x4 100686 2.47
370 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
23/31
WE 40x40 7.5 WE 40x40 9.6
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1, technical drawings
on a scale of 2:3
Material Type Thickness Breadth For crimped mesh Item Weight
of material of slit of the Number in
in mm in mm mesh width kg/m
steel
WE 40x40 9.6 2.00 9.6 50x50x5 100682 2.43
stainless steel
304 X5CrNi18-10 2B WE 40x40 9.6 2.00 9.6 50x50x5 101241 2.36
MEVACO Catalogue 2010 371
-
7/26/2019 Category Profile Edgings
24/31
The perfect framework for your ideas: profiles quickly and simply edge expanded metals, per-
forated sheets, meshes and unperforated material. In the table from page 351, you can see
which filling material suits which profile edging. Please note that sendzimir galvanised profiles
are not suitable for outdoor use as the coating does not offer sufficient corrosion protection.
PROFILE EDGINGS
Type GEV
Material Type Thickness Breadth For welded Item Weight
of material of slit mesh of Number in
in mm in mm the mesh width kg/m
steel
GEV 30x30 3.0 1.50 3.0 30x30x3 100689 1.48
stainless steel
X5CrNi18-10 2B GEV 30x30 3.0 1.50 3.0 30x30x3 100692 1.48
Material Type Thickness Breadth For welded Item Weight
of material of slit mesh of Number in
in mm in mm the mesh width kg/m
steel
GEV 30x30 4.0 1.50 4.0 40x40x4, 50x50x4 100690 1.47
sendzimir galvanized
GEV 30x30 4.0 1.50 4.0 50x50x4, 101243 1.46
100x50x4, 100x100x4
stainless steel
X5CrNi18-10 2B GEV 30x30 4.0 1.50 4.0 40x40x4 100693 1.47
372 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
25/31
GEV 30x30 4.0 GEV 30x30 5.0GEV 30x30 3.0
Manufactured i.a.w.
European standard 162-81
(DIN 59413, 1-3)
Profile length 3000 mm.
Scale 1:1, technical drawings
on a scale of 2:3
Material Type Thickness Breadth For welded Item Weight
of material of slit mesh of Number in
in mm in mm the mesh width kg/m
steel
GEV 30x30 5.0 1.50 5.0 50x50x5, 100691 1.46
100x50x5, 100x100x5
MEVACO Catalogue 2010 373
-
7/26/2019 Category Profile Edgings
26/31
101247 101248
100710 100714 100712
RAILING FILLINGS BETWEEN THE POSTS (ZP)
Type Material Diameter for fillings of Item Weight
in material thickness Number in
mm in mm kg
Sheet Bracket stainless steel X8CrNiS18-9
for sheet / panels 1.5 2.0 mm polished grain 320 28 mm 1.5-2.0 mm 100710 0.150
Filling Bracket ZP stainless steel X8CrNiS18-9
for profile LR 10 polished grain 320 28 mm 1.5-2.0 mm 100714 0.130
Filling Bracket ZP stainless steel X8CrNiS18-9
for profile LR 18 polished grain 320 28 mm 1.5-2.0 mm 100712 0.110
Filling Bracket ZP stainless steel X8CrNiS18-9
for profile LR 27 polished grain 320 35 mm 1.5-3.0 mm 101247 0.220
Filling Bracket ZP stainless steel X8CrNiS18-9for profile LE 20 x 30 polished grain 320 35 mm 1.5-3.0 mm 101248 0.230
The filling brackets without adapters for post tubes 42.4 mm simply and reliably secure unedged perforated sheets,
textured sheets and solid material, or edged railing fittings using the profiles LR10, LR18, LR27, LE 20x30.
The complete bracket facilitates preinstallation and can be used both on inclined and straight surfaces.
The welding properties of material 1.4305 are limited.
Scale 2:3
Filling brackets without adapters
for post tubes 42.4 mm
374 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
27/31
101372 101373
RAILING FILLINGS BETWEEN THE POSTS (ZP)
The filling brackets without adapters for square tubes simply and reliably secure perforated sheet cassettes
and solid material, or edged railing fillings using the profiles LR27 and LE 20x30.
The complete bracket facilitates preinstallation and can be used on both inclined and straight surfaces.
The welding properties of material 1.4305 are limited. M6 screws are used to attach MEVACOmodul filling
and clamp brackets to the respective posts.
Scale 2:3
Type Material Diameter for fillings of Item Weight
in material thickness Number in
mm in mm kg
Filling Bracket stainless steel X8CrNiS18-9
for profile LR 27 polished grain 320 35 mm 1.5-3.0 mm 101372 0.247
Filling Bracket stainless steel X8CrNiS18-9
for profile LE 20x30 polished grain 320 35 mm 1.5-3.0 mm 101373 0.238
Filling brackets without adapters
for square tubes
MEVACO Catalogue 2010 375
-
7/26/2019 Category Profile Edgings
28/31
100810 100811 100812 100814
Type Material Diameter Length Item Weight
in in Number in
mm mm kg
Post tube adapter ZP stainless steel X8CrNiS18-9
for tube 42.4 polished grain 320 23.9 mm 28.9 mm 100810 0.049
Post tube adapter ZP stainless steel X8CrNiS18-9
for tube 33.7 polished grain 320 23.9 mm 30.2 mm 100811 0.049
Post tube adapter ZP, flat stainless steel X8CrNiS18-9
for square tube, flat steel polished grain 320 23.9 mm 25.2 mm 100812 0.048
Wall adapter ZP stainless steel X8CrNiS18-9
polished grain 320 50.0 mm 30.0 mm 100814 0.123
The filling brackets ZP simply and reliably secure unedged perforated sheets, textured sheets and solid material using
the profiles LR10, LR18, LE 10x12, LE 12x18 or U-profile edged railing fillings.
Filling brackets with adapters
for post tubes 42.4 and 33.7 mm, square tubes or wall mountings
RAILING FILLINGS BETWEEN THE POSTS (ZP)
376 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
29/31
100815 101374 100816
100817 101249 100809
Attention: The filling brackets ZP must be used together with an adapter.
The adapters facilitate a slideable horizontal length compensation of 6 mm, in order to compensate for measuring
and dimensional tolerances. The welding properties of material 1.4305 are limited. M6 screws are used to attach
MEVACOmodul filling and clamp brackets to the respective posts.
Type Material Diameter Length Item Weight
in in Number in
mm mm kg
Filling bracket ZP stainless steel X8CrNiS18-9
for sheet / panels up to 3 mm polished grain 320 28.0 mm 53.0 mm 100817 0.161
Filling bracket ZP stainless steel X8CrNiS18-9
for profile LR 10 polished grain 320 28.0 mm 53.0 mm 101249 0.150
Filling bracket ZP stainless steel X8CrNiS18-9
for profile LR 18 polished grain 320 28.0 mm 53.0 mm 100809 0.132
Filling bracket ZP stainless steel X8CrNiS18-9
for U-profile polished grain 320 28.0 mm 53.0 mm 100815 0.161
Filling bracket ZP stainless steel X8CrNiS18-9for profile LE 10x12 polished grain 320 28.0 mm 56.9 mm 101374 0.168
Filling bracket ZP stainless steel X8CrNiS18-9
for profile LE 12x18 polished grain 320 28.0 mm 55.0 mm 100816 0.147
MEVACO Catalogue 2010 377
-
7/26/2019 Category Profile Edgings
30/31
100804 100805 100806
Bezeichnung Material Dimensions Item Weight
x L / B x H x L Number in
in mm kg
Post tube adapter VP stainless steel X8CrNiS18-9
for tube 33.7 polished grain 320 18.0 x 12.6 mm 100804 0.018
Post tube adapter VP stainless steel X8CrNiS18-9
for tube 42.4 polished grain 320 18.0 x 12.0 mm 100805 0.018
Post tube adapter VP, flat stainless steel X8CrNiS18-9
for square tube. flat steel polished grain 320 18.0 x 10.0 mm 100806 0.016
The clamp brackets VP simply and reliably secure edged railing fillings with LR18 profiles, LE 12x18 profiles or LE 20x30 profiles.
Here you have the opportunity to quickly and inexpensively set the tone using large surface fillings in front of the railing posts.
Clamp brackets with adapters
for post tubes 42.4 and 33.7 mm, square tubes or wall mountings
RAILING FILLINGS IN FRONT OF THE POSTS (VP)
378 MEVACO Catalogue 2010
-
7/26/2019 Category Profile Edgings
31/31
100813 100819 100820
Attention: the filling brackets VP must be used together with an adapter.
The adapters facilitate a slideable vertical height compensation of 5 mm, in order to compensate for measuring
and dimensional tolerances. The welding properties of material 1.4305 are limited. M6 screws are used to attach
MEVACOmodul filling and clamp brackets to the respective posts.
Bezeichnung Material Dimensions Item Weight
x L / B x H x L Number in
in mm kg
Clamp bracket VP stainless steel X8CrNiS18-9
for profile LR 18 polished grain 320 20.0 x 37.0 x 26.0 mm 100813 0.101
Clamp bracket VP stainless steel X8CrNiS18-9
for profile LE 12x18 polished grain 320 20.0 x 39.0 x 26.0 mm 100819 0.113
Clamp bracket VP stainless steel X8CrNiS18-9
for profile LE 20x30 polished grain 320 20.0 x 52.0 x 28.8 mm 100820 0.126